{"title":"2023 Toyota Tundra Lift \u0026 Leveling Kits","description":"\u003cp\u003eLeveling kits and lift kits for the 2023 Toyota Tundra from Fabtech, ReadyLift and TrailFX, to level out the factory rake or make room for bigger tires.\u003c\/p\u003e\u003cp\u003e2023 Tundras share body and bed fitment with 2022. Parts for the 2007-2021 Tundra do not fit this generation - bumpers, steps and bed covers are all different.\u003c\/p\u003e\u003cp\u003eEvery part here is matched to the 2023 Toyota Tundra with manufacturer fitment data. Select your trim, cab and bed in the vehicle bar above to see only what fits. Also shop \u003ca href=\"\/collections\/2023-toyota-tundra-parts-accessories\"\u003eall 2023 Toyota Tundra parts\u003c\/a\u003e or \u003ca href=\"\/collections\/toyota-tundra-lift-leveling-kits\"\u003eToyota Tundra lift \u0026amp; leveling kits for every year\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"fabtech-k7091dl-uniball-lift-kit-with-dirt-logic-shocks-for-2022-2026-toyota-tundra","title":"Fabtech K7091DL Uniball Lift Kit with Dirt Logic Shocks for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7091DL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7091DL Uniball Lift Kit, engineered to increase ride height, improve suspension strength, and accommodate 33-inch or 35-inch tires. The system helps level the vehicle’s stance from front to rear while delivering a more aggressive appearance and improved capability for on-road and off-road driving. This complete suspension package combines Fabtech Uniball Upper Control Arms with Dirt Logic coilover and rear shock technology for a balanced, durable upgrade.\u003cbr\u003eThe Fabtech Uniball Upper Control Arms replace the factory upper control arms and provide an additional degree of caster compared with the stock configuration. Increased caster helps balance steering effort when running oversized tires while supporting a more positive on-road feel. Each arm is built from 4130 chromoly steel tubing and uses a 1-inch FK stainless PTFE-lined Uniball bearing in place of the smaller factory ball joint. This design allows increased suspension travel with reduced binding and is engineered for long-term performance in demanding off-road conditions.\u003cbr\u003eThe front Dirt Logic 2.5 coilover shocks and rear Dirt Logic 2.25 shocks are tuned to work together for controlled handling and a balanced ride. Stainless steel shock bodies and NitroSteel piston rods provide excellent corrosion resistance in harsh environments, while the rear coil spring spacers add the required lift height. The Fabtech K7091DL lift kit is a practical suspension solution for Tundra owners seeking increased tire clearance, enhanced suspension travel, and Fabtech quality. Fits 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models. Professional installation and alignment are recommended. California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Purpose: Increases ride height and helps level the vehicle stance front to rear\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Compatibility: Designed for use with 33-inch or 35-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Control Arms: Fabtech Uniball arms replace the factory upper control arms and provide additional caster\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Made from 4130 chromoly steel tubing for strength and durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniball Bearings: Uses 1-inch FK stainless PTFE-lined Uniball bearings for increased suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Shocks: Includes Dirt Logic 2.5 coilover shocks for controlled front suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Shocks: Includes Dirt Logic 2.25 shocks for a balanced ride\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Construction: Stainless steel bodies and NitroSteel piston rods resist corrosion\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Lift: Coil spring spacers provide additional rear ride height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: Fabtech K7091DL\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePart Number: K7091DL\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Limited, Limited TRD Off-Road, Platinum, Platinum 1794 Edition, SR, SR TRD Off-Road, SR5, SR5 TRD Off-Road, TRD Pro – 3 in. Lift; w\/Uniball; Front Dirt Logic 2.5 Resi Coilover; Rear Dirt Logic 2.25 Shock; Rear Air Bag Spacers; Use 33\/12.50R18 tires w\/18x9 wheels w\/5in BS w\/minor trimming~33\/12.50R20 Tires w\/20x9 Wheels w\/5 in. BS w\/Minor Trimming~Does No Fit Hybrid Models~Fits Crewmax Models Only~Does Not Fit Models Equipped With Adaptive Variable Suspension (AVS) Shocks~Use 35\/12.50R18 Tire w\/18X9 Wheel w\/5 in. BS w\/Cutting~Use 35\/12.50R20 Tire w\/20X9 Wheel w\/5 in. BS w\/Cutting\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771516452973,"sku":"K7091DL","price":4016.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7091dl-beauty-02.jpg?v=1792223300"},{"product_id":"fabtech-k7090dl-uniball-lift-kit-for-2022-2026-toyota-tundra","title":"Fabtech K7090DL Uniball Lift Kit for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7090DL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7090DL Uniball Lift Kit, engineered to increase ground clearance, improve suspension strength, and accommodate 33-inch or 35-inch tires. This complete suspension system helps level the truck’s stance from front to rear while delivering a more aggressive appearance and improved capability for on-road and off-road driving. The kit replaces the factory upper control arms with Fabtech Uniball Upper Control Arms designed to provide additional caster over the stock arms, helping balance steering effort when running oversized tires.\u003cbr\u003eThe Fabtech upper control arms are built from .120-inch-wall, 1.25-inch-outside-diameter 4130 chromoly steel tubing for durable performance in demanding conditions. A 1-inch FK stainless steel PTFE-lined Uniball bearing replaces the smaller factory ball joint, allowing increased suspension travel with reduced binding. These heavy-duty arms are designed for long-term use in rugged off-road environments while providing a more positive feel during street driving. They are also engineered to work with the included Dirt Logic 2.5 coilover shocks to increase front wheel travel.\u003cbr\u003eAt the rear, Dirt Logic 2.25 shocks provide balanced damping and controlled suspension performance. Each Dirt Logic shock features a stainless steel body and NitroSteel piston rod for enhanced corrosion resistance in harsh environments. The shocks have been tested and tuned to deliver a controlled, comfortable ride both on and off the road. Rear ride height is increased with coil spring spacers, completing an affordable and capable suspension upgrade for Tundra owners seeking Fabtech quality, increased tire clearance, and improved handling. Professional installation and alignment are recommended. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Kit: Raises and levels the vehicle for improved tire clearance and a more aggressive stance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Compatibility: Designed for use with 33-inch or 35-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Control Arms: Fabtech Uniball arms replace the factory upper control arms and provide additional caster\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Made from .120-inch-wall, 1.25-inch-outside-diameter 4130 chromoly steel tubing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniball Bearing: Includes a 1-inch FK stainless steel PTFE-lined Uniball for increased suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Shocks: Dirt Logic 2.5 coilover shocks support increased front wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Shocks: Dirt Logic 2.25 shocks provide balanced damping and ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Construction: Stainless steel bodies and NitroSteel piston rods resist corrosion\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Lift: Coil spring spacers provide additional ride height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K7090DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePart Number: K7090DL\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Limited, Limited TRD Off-Road, Platinum, Platinum 1794 Edition, SR, SR TRD Off-Road, SR5, SR5 TRD Off-Road – 3 in. Lift; w\/Uniball; Front Dirt Logic 2.5 Coilover N\/R; Rear Dirt Logic 2.25 Shocks; Rear Air Bag Spacer; Use 33\/12.50R18 tires w\/18x9 wheels w\/5in BS w\/minor trimming~33\/12.50R20 Tires w\/20x9 Wheels w\/5 in. BS w\/Minor Trimming~Does No Fit Hybrid Models~Fits Crewmax Models Only~Does Not Fit Models Equipped With Adaptive Variable Suspension (AVS) Shocks~Use 35\/12.50R18 Tire w\/18X9 Wheel w\/5 in. BS w\/Cutting~Use 35\/12.50R20 Tire w\/20X9 Wheel w\/5 in. BS w\/Cutting\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771517010029,"sku":"K7090DL","price":3587.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7090dl-beauty-02.jpg?v=1792223323"},{"product_id":"fabtech-k7089m-3-inch-lift-kit-with-uniball-upper-control-arms-for-2022-2026-toyota-tundra","title":"Fabtech K7089M 3-Inch Lift Kit with Uniball Upper Control Arms for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7089M\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7089M Lift Kit Suspension, engineered to provide approximately 3 inches of lift while improving front suspension strength and supporting the use of 33-inch or 35-inch tires. This complete suspension system helps level the vehicle’s stance from front to rear, creating a more aggressive appearance without sacrificing the factory front ride quality. The kit is designed for Tundra owners seeking dependable performance for both everyday driving and off-road use.\u003cbr\u003eThe factory upper control arms are replaced with Fabtech Uniball Upper Control Arms, which provide additional caster compared with the original arms. Increased caster helps balance steering effort when running oversized tires while improving on-road handling. Each arm is built from .120-inch-wall, 1.25-inch outside-diameter 4130 chromoly steel tubing for strength and durability. High-quality 1-inch FK stainless PTFE-lined uniball bearings replace the smaller factory ball joints, allowing increased suspension travel with reduced bind in demanding terrain. The arms eliminate the factory-style upper ball joint and are designed for long-term service in rugged conditions.\u003cbr\u003eFront lift is achieved with spacers installed on the factory coilover shocks, helping retain the stock ride quality. Rear coil spring spacers provide the additional ride height, while Fabtech Stealth monotube rear shocks enhance ride control on pavement and off-road surfaces. Together, these components deliver a balanced suspension upgrade with Fabtech’s proven construction quality. The Fabtech K7089M fits 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models. Professional installation and an alignment are recommended after installation. WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApproximately 3 inches of suspension lift for a more aggressive, level stance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupports 33-inch or 35-inch tires when properly configured\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech Uniball Upper Control Arms replace the factory upper ball joints\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e4130 chromoly steel control arms provide strength for demanding off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFK stainless PTFE-lined uniball bearings allow increased suspension travel with reduced bind\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront coilover spacers help retain the factory front ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear coil spring spacers provide additional ride height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech Stealth monotube rear shocks improve on-road and off-road ride control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K7089M\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLift\/Drop Height: 3\u003c\/li\u003e\n\u003cli\u003ePart Number: K7089M\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Capstone, Limited, Platinum, SR, SR5 – 3 in. Lift; UCA Kit w\/Uniball; Front Shock Spacer; Rear Air Bag Spacer; Rear Stealth Shocks; Does No Fit Hybrid Models~Fits Crewmax Models Only\u003c\/li\u003e\n\u003cli\u003e2022 Toyota Tundra – Limited TRD Off-Road, SR TRD Off-Road, SR5 TRD Off-Road – 3 in. Lift; UCA Kit w\/Uniball; Front Shock Spacer; Rear Air Bag Spacer; Rear Stealth Shocks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771517468781,"sku":"K7089M","price":1668.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7089m-beauty-02.jpg?v=1792223338"},{"product_id":"fabtech-k7089dl-uniball-lift-kit-for-2022-2026-toyota-tundra","title":"Fabtech K7089DL Uniball Lift Kit for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7089DL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7089DL Uniball Lift Kit, engineered to increase ground clearance, improve front suspension strength, and accommodate 33-inch or 35-inch tires. The kit helps level the truck’s stance from front to rear while delivering a more aggressive appearance and enhanced off-road capability. It includes Fabtech Uniball Upper Control Arms, Dirt Logic coilover shocks, rear shocks, and coil spring spacers for a complete suspension upgrade.\u003cbr\u003eThe Fabtech upper control arms replace the factory arms and provide approximately one additional degree of caster compared with the original components. This added caster helps balance steering effort when running oversized tires. Each arm is built from 4130 chromoly steel tubing with a strong, durable design intended for demanding off-road conditions. A 1-inch FK stainless steel PTFE-lined Uniball bearing replaces the smaller factory ball joint, allowing increased suspension travel while minimizing binding. The control arms are designed to work with Dirt Logic 2.5 coilover shocks for improved front wheel travel and controlled suspension performance.\u003cbr\u003eDirt Logic 2.25 rear shocks complement the front coilovers for a balanced ride on and off the road. Their stainless steel bodies and NitroSteel piston rods provide strong corrosion resistance in harsh environments, while Fabtech’s tuned shock design supports responsive handling and ride quality. Rear lift is achieved with coil spring spacers that add the necessary ride height without requiring a complete rear spring replacement. Designed for enthusiasts seeking Fabtech quality, strength, and dependable suspension performance, the K7089DL lift kit is a comprehensive solution for the 2022, 2023, 2024, 2025, and 2026 Toyota Tundra. Professional installation and alignment are recommended after installation. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Kit Design: Increases ride height and helps level the vehicle stance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Compatibility: Designed to accommodate 33-inch or 35-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Control Arms: Replaces factory arms with durable Fabtech Uniball Upper Control Arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eControl Arm Material: Constructed from 4130 chromoly steel tubing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniball Bearing: Uses a 1-inch FK stainless steel PTFE-lined Uniball bearing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCaster Improvement: Provides approximately one additional degree of caster compared with stock arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Shocks: Includes Dirt Logic 2.5 coilover shocks for increased front wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Shocks: Includes Dirt Logic 2.25 shocks for balanced on-road and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Construction: Stainless steel bodies and NitroSteel piston rods resist corrosion\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Lift: Uses coil spring spacers to provide additional ride height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOff-Road Durability: Engineered for demanding terrain and extended service life\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K7089DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePart Number: K7089DL\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Capstone, Limited, Limited TRD Off-Road, Platinum, Platinum 1794 Edition, SR, SR TRD Off-Road, SR5, SR5 TRD Off-Road, TRD Pro – 3 in. Lift; w\/Uniball; Front Shock Spacer; Rear Dirt Logic 2.25 Shock; Rear Air Bag Spacers; Use 33\/12.50R18 tires w\/18x9 wheels w\/5in BS w\/minor trimming~33\/12.50R20 Tires w\/20x9 Wheels w\/5 in. BS w\/Minor Trimming~Does No Fit Hybrid Models~Fits Crewmax Models Only~Does Not Fit Models Equipped With Adaptive Variable Suspension (AVS) Shocks~Use 35\/12.50R18 Tire w\/18X9 Wheel w\/5 in. BS w\/Cutting~Use 35\/12.50R20 Tire w\/20X9 Wheel w\/5 in. BS w\/Cutting\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771518484589,"sku":"K7089DL","price":2148.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7089dl-beauty-02.jpg?v=1792223359"},{"product_id":"fabtech-k7089-uniball-lift-kit-suspension-for-2022-2026-toyota-tundra","title":"Fabtech K7089 Uniball Lift Kit Suspension for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7089\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7089 Uniball Lift Kit Suspension, engineered to provide approximately 3 inches of lift while improving front suspension strength and off-road capability. This complete suspension system helps level the truck’s stance from front to rear and creates clearance for 33-inch or 35-inch tires. Designed for enthusiasts who want dependable Fabtech quality without sacrificing stock-like ride comfort, the kit is a practical solution for both street-driven trucks and rugged trail vehicles.\u003cbr\u003eThe kit replaces the factory upper control arms with Fabtech Uniball Upper Control Arms that provide an additional degree of caster compared with the original arms. Increased caster helps balance steering effort when running oversized tires and contributes to a more positive on-road feel. Each arm is built from .120-inch-wall, 1.25-inch-outside-diameter 4130 chromoly steel tubing for strength and durability. High-quality 1-inch FK stainless PTFE-lined Uniball bearings replace the smaller factory ball joints, allowing increased suspension travel with reduced binding in demanding off-road conditions.\u003cbr\u003eFront lift is achieved with coilover spacers that retain the factory front coilover shocks and help preserve the original ride characteristics. At the rear, coil spring spacers provide additional ride height, while Fabtech Stealth monotube shocks enhance control and comfort on pavement and off-road surfaces. The components are designed to work together as a balanced suspension upgrade for the Toyota Tundra, delivering increased clearance, improved suspension geometry, and long-term performance. Professional installation and alignment are recommended after installation. This product carries a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApproximately 3 inches of lift helps level the front and rear stance and provides clearance for 33-inch or 35-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech Uniball Upper Control Arms replace the factory upper control arms and add caster for improved steering balance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e4130 chromoly steel tubing construction provides strong, durable upper control arms for demanding off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFK stainless PTFE-lined Uniball bearings allow increased suspension travel with reduced binding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront coilover spacers provide lift while retaining the factory front coilover shocks and ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear coil spring spacers provide additional ride height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech Stealth monotube rear shocks improve ride control on and off the road\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning: Cancer and reproductive harm\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLift\/Drop Height: 3\u003c\/li\u003e\n\u003cli\u003ePart Number: K7089\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Capstone, Limited, Platinum, SR, SR5 – 3 in. Lift; UCA Kit w\/Uniball; Front Shock Spacer; Rear Air Bag Spacer; Rear Perfomance Shocks; Does No Fit Hybrid Models~Fits Crewmax Models Only\u003c\/li\u003e\n\u003cli\u003e2022 Toyota Tundra – Limited TRD Off-Road, SR TRD Off-Road, SR5 TRD Off-Road – 3 in. Lift; UCA Kit w\/Uniball; Front Shock Spacer; Rear Air Bag Spacer; Rear Perfomance Shocks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771519107181,"sku":"K7089","price":1584.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7089-beauty-02.jpg?v=1792223374"},{"product_id":"fabtech-k7088dl-uniball-lift-kit-for-2022-2026-toyota-tundra","title":"Fabtech K7088DL Uniball Lift Kit for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7088DL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7088DL Uniball Lift Kit, engineered to provide increased suspension strength, improved wheel travel, and the clearance needed to run 33-inch or 35-inch tires. The kit helps level the vehicle from front to rear while delivering a more aggressive stance and dependable performance on and off the road.\u003c\/p\u003e\n\u003cp\u003eAt the front, factory upper control arms are replaced with Fabtech Uniball Upper Control Arms built from .120-inch-wall, 1.25-inch outside diameter 4130 chromoly steel tubing. These arms provide an additional degree of caster over the stock components, helping balance steering effort when oversized tires are installed. A 1-inch FK stainless steel PTFE-lined American Uniball bearing replaces the factory ball joint, allowing increased suspension travel with reduced binding and delivering a stronger, more positive feel in demanding driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe control arms are designed to work with Dirt Logic 2.5 coilover shocks for increased front wheel travel, while Dirt Logic 2.25 rear shocks provide balanced ride control. Stainless steel shock bodies and NitroSteel piston rods offer excellent corrosion resistance, and the shocks are tuned for consistent ride quality on pavement and rugged trails. Rear lift is achieved with coil spring spacers that add ride height without compromising the overall suspension design.\u003c\/p\u003e\n\u003cp\u003eThe Fabtech K7088DL combines durable materials, carefully matched suspension components, and proven off-road engineering for Tundra owners seeking additional tire clearance and enhanced capability. This kit fits 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models. Professional installation and alignment are recommended after installation. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for 2022-2026 Toyota Tundra models\u003c\/li\u003e\n\u003cli\u003eProvides lift height for 33-inch or 35-inch tires\u003c\/li\u003e\n\u003cli\u003eReplaces factory upper control arms with heavy-duty 4130 chromoly Uniball arms\u003c\/li\u003e\n\u003cli\u003eUses a 1-inch FK stainless steel PTFE-lined American Uniball bearing\u003c\/li\u003e\n\u003cli\u003eAdds approximately one degree of caster compared with stock upper control arms\u003c\/li\u003e\n\u003cli\u003eHelps increase front suspension travel while reducing binding\u003c\/li\u003e\n\u003cli\u003eIncludes Dirt Logic 2.5 front coilover shocks\u003c\/li\u003e\n\u003cli\u003eIncludes Dirt Logic 2.25 rear shocks for balanced ride control\u003c\/li\u003e\n\u003cli\u003es stainless steel shock bodies and NitroSteel piston rods for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eUses rear coil spring spacers to achieve additional lift height\u003c\/li\u003e\n\u003cli\u003eEngineered for improved on-road handling and rugged off-road performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePart Number: K7088DL\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Capstone, Limited, Limited TRD Off-Road, Platinum, Platinum 1794 Edition, SR, SR TRD Off-Road, SR5, SR5 TRD Off-Road, TRD Pro – 3 in. Lift; w\/Uniball; Front Dirt Logic 2.5 Resi Coilover; Rear Dirt Logic 2.25 Shock; Rear Coil Spacers; Use 33\/12.50R18 tires w\/18x9 wheels w\/5in BS w\/minor trimming~33\/12.50R20 Tires w\/20x9 Wheels w\/5 in. BS w\/Minor Trimming~Does No Fit Hybrid Models~Fits Crewmax Models Only~Does Not Fit Models Equipped With Adaptive Variable Suspension (AVS) Shocks~Use 35\/12.50R18 Tire w\/18X9 Wheel w\/5 in. BS w\/Cutting~Use 35\/12.50R20 Tire w\/20X9 Wheel w\/5 in. BS w\/Cutting\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771519697005,"sku":"K7088DL","price":4173.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7088dl-beauty-02.jpg?v=1792223385"},{"product_id":"fabtech-k7087dl-uniball-lift-kit-with-dirt-logic-shocks-for-2022-2026-toyota-tundra","title":"Fabtech K7087DL Uniball Lift Kit with Dirt Logic Shocks for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7087DL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7087DL Uniball Lift Kit, engineered to increase ground clearance, improve suspension strength, and accommodate 33-inch or 35-inch tires. This complete suspension package helps level the vehicle from front to rear while delivering a more aggressive stance and confident performance on and off the road.\u003c\/p\u003e\n\u003cp\u003eThe kit replaces the factory upper control arms with Fabtech Uniball Upper Control Arms designed to provide an additional degree of caster compared with the original arms. Increased caster helps balance steering effort when running oversized tires. Each arm is built from .120-inch-wall, 1.25-inch-outside-diameter 4130 chromoly steel tubing and uses a 1-inch FK stainless steel PTFE-lined uniball bearing in place of the factory ball joint. This design increases suspension travel, reduces binding, and provides durable performance in demanding off-road conditions.\u003c\/p\u003e\n\u003cp\u003eFabtech pairs the upper control arms with Dirt Logic 2.5 front coilover shocks and Dirt Logic 2.25 rear shocks for balanced handling and ride quality. Stainless steel shock bodies and NitroSteel piston rods provide strong corrosion resistance, while the tuned valving supports controlled suspension action both on pavement and over rough terrain. Rear ride height is increased with coil spring spacers, completing an affordable lift solution for Tundra owners seeking additional clearance and Fabtech durability.\u003c\/p\u003e\n\u003cp\u003eDesigned for the 2022, 2023, 2024, 2025, and 2026 Toyota Tundra, the Fabtech K7087DL lift kit combines reinforced suspension components, increased travel, and carefully matched shocks in one comprehensive upgrade. Professional installation and alignment are recommended. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2022-2026 Toyota Tundra models\u003c\/li\u003e\n\u003cli\u003eSupports installation of 33-inch or 35-inch tires\u003c\/li\u003e\n\u003cli\u003eIncludes Fabtech Uniball Upper Control Arms\u003c\/li\u003e\n\u003cli\u003eProvides approximately one additional degree of caster compared with stock control arms\u003c\/li\u003e\n\u003cli\u003eConstructed from .120-inch-wall, 1.25-inch-outside-diameter 4130 chromoly steel tubing\u003c\/li\u003e\n\u003cli\u003eUses 1-inch FK stainless steel PTFE-lined uniball bearings\u003c\/li\u003e\n\u003cli\u003eDesigned for increased suspension travel with reduced binding\u003c\/li\u003e\n\u003cli\u003eIncludes Dirt Logic 2.5 front coilover shocks\u003c\/li\u003e\n\u003cli\u003eIncludes Dirt Logic 2.25 rear shocks\u003c\/li\u003e\n\u003cli\u003es stainless steel shock bodies and NitroSteel piston rods\u003c\/li\u003e\n\u003cli\u003eUses rear coil spring spacers to increase ride height\u003c\/li\u003e\n\u003cli\u003eHelps level the vehicle stance from front to rear\u003c\/li\u003e\n\u003cli\u003eEngineered for improved on-road feel and off-road durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePart Number: K7087DL\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Capstone, Limited, Limited TRD Off-Road, Platinum, Platinum 1794 Edition, SR, SR TRD Off-Road, SR5, SR5 TRD Off-Road, TRD Pro – 3 in. Lift; w\/Uniball; Front Dirt Logic 2.5 Coilover N\/R;  Rear Dirt Logic 2.25 Shock; Rear Coil Spacers; Use 33\/12.50R18 tires w\/18x9 wheels w\/5in BS w\/minor trimming~33\/12.50R20 Tires w\/20x9 Wheels w\/5 in. BS w\/Minor Trimming~Does No Fit Hybrid Models~Fits Crewmax Models Only~Does Not Fit Models Equipped With Adaptive Variable Suspension (AVS) Shocks~Use 35\/12.50R18 Tire w\/18X9 Wheel w\/5 in. BS w\/Cutting~Use 35\/12.50R20 Tire w\/20X9 Wheel w\/5 in. BS w\/Cutting\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771521466477,"sku":"K7087DL","price":3743.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7087dl-beauty-02.jpg?v=1792223406"},{"product_id":"fabtech-k7086m-uniball-lift-kit-suspension-for-2022-2026-toyota-tundra","title":"Fabtech K7086M Uniball Lift Kit Suspension for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7086M\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7086M Uniball Lift System, engineered to provide approximately 3 inches of lift while adding strength and capability to the front suspension. This suspension system helps level the vehicle from front to rear and provides clearance for 33-inch or 35-inch tires, creating a more aggressive stance without sacrificing the factory ride quality provided by the front coilover shocks.\u003c\/p\u003e\u003cp\u003eThe kit replaces the factory upper control arms with Fabtech Uniball Upper Control Arms designed for improved suspension travel and dependable performance in demanding off-road conditions. Each arm is constructed from 1.25-inch outside diameter, 0.120-inch wall 4130 chromoly steel tubing for excellent strength and durability. High-quality 1-inch FK stainless steel PTFE-lined Uniball bearings replace the smaller factory ball joints, helping eliminate binding and providing a more positive on-road steering feel. Additional caster compared with the factory arms helps balance steering effort when running oversized tires.\u003c\/p\u003e\u003cp\u003eFront lift is achieved with coilover spacers that retain the stock front shock absorbers and ride characteristics. Rear ride height is increased with coil spring spacers, while Fabtech Stealth monotube rear shocks enhance control and ride quality on both paved roads and trails. The Fabtech K7086M is a practical suspension upgrade for Tundra owners seeking increased tire clearance, improved suspension strength, and reliable performance for daily driving and off-road use. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K7086M\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: 2022-2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: Approximately 3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Compatibility: Designed for use with 33-inch or 35-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eControl Arms: 4130 chromoly steel Uniball upper control arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBearing Design: 1-inch FK stainless steel PTFE-lined Uniball bearings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCaster: Provides additional caster compared with factory upper control arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Lift: Coilover spacers retain the stock front shocks and ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Lift: Coil spring spacers increase rear ride height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Shocks: Fabtech Stealth monotube shocks for improved ride control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Travel: Uniball design helps increase travel and reduce binding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning for cancer and reproductive harm\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLift\/Drop Height: 3\u003c\/li\u003e\n\u003cli\u003ePart Number: K7086M\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Limited, Limited TRD Off-Road, Platinum, SR, SR TRD Off-Road, SR5, SR5 TRD Off-Road – 3 in. Lift; UCA Kit w\/Uniball; Front Shock Spacer; Rear Coil Spacer; Rear Stealth Shocks; Does No Fit Hybrid Models~Fits Crewmax Models Only\u003c\/li\u003e\n\u003cli\u003e2022-2026 Toyota Tundra – Capstone – 3 in. Lift; UCA Kit w\/Uniball; Front Shock Spacer; Rear Coil Spacer; Rear Stealth Shocks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771522351213,"sku":"K7086M","price":1811.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7086m-beauty-02.jpg?v=1792223418"},{"product_id":"fabtech-k7086dl-uniball-lift-kit-for-2022-2026-toyota-tundra","title":"Fabtech K7086DL Uniball Lift Kit for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7086DL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7086DL Uniball Lift Kit, engineered to provide increased ride height, enhanced front suspension strength, and clearance for 33-inch or 35-inch tires. This suspension system helps level the vehicle from front to rear while delivering a more aggressive stance and improved off-road capability.\u003c\/p\u003e\n\u003cp\u003eThe kit replaces the factory upper control arms with Fabtech Uniball Upper Control Arms constructed from .120-inch-wall, 1.25-inch outside-diameter 4130 chromoly steel tubing. A 1-inch FK stainless PTFE-lined American Uniball bearing replaces the smaller factory ball joint, allowing increased suspension travel with reduced binding. Additional caster helps balance steering effort when running oversized tires, while the robust arm design is built for durability in demanding off-road conditions and provides a more positive on-road feel.\u003c\/p\u003e\n\u003cp\u003eFabtech designed the K7086DL to work with Dirt Logic 2.5 coilover shocks in the front for additional wheel travel and Dirt Logic 2.25 shocks in the rear for a balanced ride. Stainless steel shock bodies and NitroSteel piston rods provide excellent corrosion resistance, while the tuned shock design supports controlled handling and ride quality on pavement, trails, and uneven terrain. Rear ride height is increased with coil spring spacers for a cohesive lifted stance.\u003c\/p\u003e\n\u003cp\u003eDesigned for enthusiasts seeking Fabtech quality and strength, this complete lift kit delivers a practical suspension upgrade for tire clearance, improved stance, and dependable performance. The Fabtech K7086DL fits 2022, 2023, 2024, 2025, and 2026 Toyota Tundra applications. Professional installation and alignment are recommended after installation. California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits 2022-2026 Toyota Tundra models\u003c\/li\u003e\n\u003cli\u003eTire Clearance: Supports 33-inch or 35-inch tires\u003c\/li\u003e\n\u003cli\u003eFront Control Arms: 4130 chromoly steel Uniball upper control arms\u003c\/li\u003e\n\u003cli\u003eUniball Bearing: 1-inch FK stainless PTFE-lined American Uniball\u003c\/li\u003e\n\u003cli\u003eCaster: Provides additional caster to help balance steering effort with oversized tires\u003c\/li\u003e\n\u003cli\u003eFront Shocks: Dirt Logic 2.5 coilover shocks for increased front wheel travel\u003c\/li\u003e\n\u003cli\u003eRear Shocks: Dirt Logic 2.25 shocks for a balanced ride\u003c\/li\u003e\n\u003cli\u003eShock Construction: Stainless steel bodies with NitroSteel piston rods\u003c\/li\u003e\n\u003cli\u003eRear Lift: Coil spring spacers provide additional ride height\u003c\/li\u003e\n\u003cli\u003ePart Number: Fabtech K7086DL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePart Number: K7086DL\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Limited, Limited TRD Off-Road, Platinum, Platinum 1794 Edition, SR, SR TRD Off-Road, SR5, SR5 TRD Off-Road, TRD Pro – 3 in. Lift; w\/Uniball; Front Shock Spacer; Rear Coil Spacer; Rear Dirt Logic 2.25 Shock; Use 33\/12.50R18 tires w\/18x9 wheels w\/5in BS w\/minor trimming~33\/12.50R20 Tires w\/20x9 Wheels w\/5 in. BS w\/Minor Trimming~Does No Fit Hybrid Models~Fits Crewmax Models Only~Does Not Fit Models Equipped With Adaptive Variable Suspension (AVS) Shocks~Use 35\/12.50R18 Tire w\/18X9 Wheel w\/5 in. BS w\/Cutting~Use 35\/12.50R20 Tire w\/20X9 Wheel w\/5 in. BS w\/Cutting\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771523563629,"sku":"K7086DL","price":2291.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7086dl-beauty-02.jpg?v=1792223433"},{"product_id":"fabtech-k7086-3-inch-lift-kit-with-uniball-upper-control-arms-for-2022-2026-toyota-tundra","title":"Fabtech K7086 3-Inch Lift Kit with Uniball Upper Control Arms for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant:\u003c\/strong\u003e Lift; UCA Kit w\/Uniball; Front Shock Spacer; Rear Coil Spacer; Rear Perfomance Shocks; Does No Fit Hybrid Models~Fits Crewmax Models Only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech K7086\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech K7086 Lift Kit Suspension system, engineered to increase ground clearance and support the use of 33-inch or 35-inch tires. This complete suspension upgrade helps level the vehicle’s stance from front to rear while adding front suspension strength for a more capable and aggressive setup. The kit is designed to improve both on-road steering feel and off-road performance without sacrificing the factory front coilover ride quality.\u003cbr\u003eThe Fabtech Uniball Upper Control Arms replace the factory Tundra upper control arms and provide approximately one additional degree of caster compared with the stock components. This added caster helps balance steering effort when running oversized tires. Each arm is fabricated from .120-inch-wall, 1.25-inch outside-diameter 4130 chromoly steel tubing for reliable performance in demanding driving conditions. High-quality 1-inch FK stainless PTFE-lined uniball bearings replace the smaller factory ball joints, allowing increased suspension travel with reduced binding.\u003cbr\u003eFront lift is achieved with spacers installed on the factory coilover shocks, while rear coil spring spacers provide additional ride height. Fabtech Stealth monotube rear shocks are included to enhance damping and ride control on pavement and off-road terrain. The result is a durable, well-balanced suspension system for Tundra owners seeking additional clearance, improved suspension geometry, and Fabtech quality. Professional installation and an alignment are recommended after installation. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K7086\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2022-2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Compatibility: Designed for 33-inch or 35-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Control Arms: 4130 chromoly steel construction with FK stainless PTFE-lined uniball bearings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCaster Adjustment: Provides approximately one additional degree of caster compared with factory upper control arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Lift: Coilover spacers retain the factory front shock absorbers and ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Lift: Coil spring spacers provide additional ride height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Shocks: Fabtech Stealth monotube shocks improve on-road and off-road ride control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Travel: Uniball design allows increased travel with reduced binding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLift\/Drop Height: 3\u003c\/li\u003e\n\u003cli\u003ePart Number: K7086\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Limited, Limited TRD Off-Road, Platinum, SR, SR TRD Off-Road, SR5, SR5 TRD Off-Road – 3 in. Lift; UCA Kit w\/Uniball; Front Shock Spacer; Rear Coil Spacer; Rear Perfomance Shocks; Does No Fit Hybrid Models~Fits Crewmax Models Only\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771524579437,"sku":"K7086","price":1728.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7086-beauty-02.jpg?v=1792223450"},{"product_id":"trailfx-t15ll1-1-5-inch-front-leveling-kit-for-2022-2024-toyota-tundra","title":"TrailFX T15LL1 1.5-Inch Front Leveling Kit for 2022-2024 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2024 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e TrailFX T15LL1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Mounting hardware included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEst. install time:\u003c\/strong\u003e 1.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eImprove the stance and front-end clearance of your truck with the TrailFX T15LL1 Leveling Kit Suspension, engineered for 2022, 2023, and 2024 Toyota Tundra models. This performance-grade kit provides a 1.5-inch front lift to help reduce the factory nose-down appearance while allowing room for larger tires up to 33 x 12.00, depending on wheel and suspension configuration.\u003c\/p\u003e\n\u003cp\u003eThe TrailFX T15LL1 uses durable black steel strut assembly extensions designed to help eliminate ball joint, tie rod, and steering bind. The components are built to support reliable performance without sacrificing ride quality. Installation requires no drilling or cutting, and the kit includes mounting hardware and fittings for a straightforward installation. Estimated installation time is approximately 1.5 hours.\u003c\/p\u003e\n\u003cp\u003eThis suspension leveling kit does not include shocks or struts, air lines, wiring, a compressor, or a self-leveling switch. It is designed for vehicles using a minimum 17-inch wheel with a recommended 5.50-inch wheel backspacing and zero-millimeter offset. Verify vehicle configuration and wheel and tire clearance before installation. The TrailFX T15LL1 is backed by a limited lifetime warranty for added confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2022-2024 Toyota Tundra\u003cbr\u003e\u003cstrong\u003eLift Height:\u003c\/strong\u003e 1.5 inches\u003cbr\u003e\u003cstrong\u003eKit Type:\u003c\/strong\u003e Strut assembly extension\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003cbr\u003e\u003cstrong\u003eMaximum Tire Size:\u003c\/strong\u003e 33 x 12.00\u003cbr\u003e\u003cstrong\u003eMinimum Wheel Diameter:\u003c\/strong\u003e 17 inches\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e No drilling or cutting required\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides a 1.5-inch front lift to improve vehicle stance and front tire clearance\u003c\/li\u003e\n\u003cli\u003eDesigned for 2022-2024 Toyota Tundra models\u003c\/li\u003e\n\u003cli\u003eDurable black steel strut assembly extensions support dependable performance\u003c\/li\u003e\n\u003cli\u003eEngineered to help eliminate ball joint, tie rod, and steering bind\u003c\/li\u003e\n\u003cli\u003eAccommodates tires up to 33 x 12.00, depending on vehicle configuration\u003c\/li\u003e\n\u003cli\u003eFits vehicles using a minimum 17-inch wheel\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and fittings\u003c\/li\u003e\n\u003cli\u003eRequires no drilling or cutting for installation\u003c\/li\u003e\n\u003cli\u003eEstimated installation time is approximately 1.5 hours\u003c\/li\u003e\n\u003cli\u003eShocks and struts are not included\u003c\/li\u003e\n\u003cli\u003eBacked by a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmount Raised Or Lowered: 1-1\/2 Inch Lift\u003c\/li\u003e\n\u003cli\u003eType: Strut Assembly Extension\u003c\/li\u003e\n\u003cli\u003eMaximum Tire Size: 33 x 12.00\u003c\/li\u003e\n\u003cli\u003eMinimum Wheel Diameter: 17\u003c\/li\u003e\n\u003cli\u003eWheel Offset (Mm): 0\u003c\/li\u003e\n\u003cli\u003eWheel Backspacing (In): 5.50\u003c\/li\u003e\n\u003cli\u003eIncludes Shock\/Struts: No\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eEstimated Install Time (Hours): 1.5\u003c\/li\u003e\n\u003cli\u003eMaximum Lift: 1.5 in\u003c\/li\u003e\n\u003cli\u003eShocks Included: No\u003c\/li\u003e\n\u003cli\u003eSelf Leveling Switch Included: No\u003c\/li\u003e\n\u003cli\u003ePressure Sensor Included: No\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: Yes\u003c\/li\u003e\n\u003cli\u003eAir Lines Included: No\u003c\/li\u003e\n\u003cli\u003eGrade Type: Performance\u003c\/li\u003e\n\u003cli\u003eFittings Included: Yes\u003c\/li\u003e\n\u003cli\u003eDash Panel Included: No\u003c\/li\u003e\n\u003cli\u003eCompressor Included: No\u003c\/li\u003e\n\u003cli\u003eBellows Material: Steel\u003c\/li\u003e\n\u003cli\u003eBellows Color: Black\u003c\/li\u003e\n\u003cli\u003eWiring Harness Included: No\u003c\/li\u003e\n\u003cli\u003ePart Number: T15LL1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022-2024 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment \u0026amp; Install Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included?\u003c\/strong\u003e\u003cbr\u003eYes.\u003c\/p\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"TrailFX","offers":[{"title":"Default Title","offer_id":67771698675821,"sku":"T15LL1","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/T8S_T15LL1_LEVELING_20KIT_B2C_6.jpg?v=1792227305"},{"product_id":"fabtech-fts26105-uniball-upper-control-arm-lift-kit-for-2022-2026-toyota-tundra","title":"Fabtech FTS26105 Uniball Upper Control Arm Lift Kit for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech FTS26105\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade the front suspension of your 2022-2026 Toyota Tundra with the Fabtech FTS26105 Uniball Upper Control Arm Lift Kit. Designed for stock or lifted suspension systems, these heavy-duty upper control arms replace the factory ball joint arms with stronger components built to withstand demanding off-road use. Additional caster helps improve alignment and on-road handling when running oversized tires.\u003cbr\u003eEach Fabtech upper control arm is constructed from .120-inch-wall, 1.50-inch outside-diameter 4130 chromoly tubing for enhanced strength and durability. The arms use American-made 1-inch FK stainless steel PTFE-lined uniballs for smooth, reliable operation throughout the suspension’s travel range. Heat-treated 17-4 stainless steel uniball pins fit the factory ball joint tapers, allowing installation without spindle modification and supporting an easy return to stock configuration when needed.\u003cbr\u003e17-4 stainless steel misalignment spacers provide proper clearance for the uniballs during suspension movement, while high-quality urethane frame-side bushings help reduce road noise and extend service life. The Fabtech FTS26105 kit combines rugged off-road construction with improved geometry and dependable street performance for Tundra owners who require a durable upper control arm upgrade. This kit fits 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models. Professional installation and alignment are recommended. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHeavy-duty 4130 chromoly upper control arms are designed for increased front suspension strength and long-term durability in rugged off-road conditions.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdditional caster helps improve on-road handling and alignment when used with oversized tires.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAmerican-made 1-inch FK stainless steel PTFE-lined uniballs provide smooth operation and reliable performance throughout the suspension travel range.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHeat-treated 17-4 stainless steel uniball pins fit the factory ball joint tapers without spindle modification.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e17-4 stainless steel misalignment spacers provide proper uniball clearance during suspension movement.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUrethane frame-side bushings help reduce road noise while supporting long service life.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle fitment includes 2022-2026 Toyota Tundra models.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26105\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2023-2026 Toyota Tundra – 3 in. Lift; Box\u003c\/li\u003e\n\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Capstone, Limited, Limited TRD Off-Road, Platinum, Platinum 1794 Edition, SR, SR TRD Off-Road, SR5, SR5 TRD Off-Road, TRD Pro – 3 in. Lift; Box; Use 33\/12.50R18 tires w\/18x9 wheels w\/5in BS w\/minor trimming~33\/12.50R20 Tires w\/20x9 Wheels w\/5 in. BS w\/Minor Trimming~Does No Fit Hybrid Models~Fits Crewmax Models Only~Does Not Fit Models Equipped With Adaptive Variable Suspension (AVS) Shocks~Use 35\/12.50R18 Tire w\/18X9 Wheel w\/5 in. BS w\/Cutting~Use 35\/12.50R20 Tire w\/20X9 Wheel w\/5 in. BS w\/Cutting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772064825453,"sku":"FTS26105","price":897.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/TOYOTA_20TUNDRA_20UCA_20UNIBALL_20KIT.jpg?v=1792234582"},{"product_id":"fabtech-ftl5606-1-5-inch-front-leveling-kit-for-2022-2026-toyota-tundra","title":"Fabtech FTL5606 1.5-Inch Front Leveling Kit for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e Fabtech FTL5606\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eImprove the stance and front-end clearance of your Toyota Tundra with the Fabtech FTL5606 1.5-inch Front Leveling Kit. Designed specifically for 2022 through 2026 Toyota Tundra models, this suspension leveling system raises the front of the truck to create a more balanced appearance while maintaining dependable suspension geometry. Fabtech engineered and tested multiple leveling heights for each application, and this kit provides the tallest recommended lift height without causing ball joint, tie rod, or steering bind.\u003cbr\u003eBuilt with heavy-duty construction, the Fabtech FTL5606 is designed for reliable performance in daily driving, towing, hauling, and off-road conditions. The kit supports a properly leveled ride height without requiring an excessively tall suspension lift, making it a practical upgrade for Tundra owners seeking improved clearance and a more aggressive profile. Professional installation is recommended to ensure proper fitment, alignment, and suspension operation.\u003cbr\u003eFabtech backs its leveling kits with a free 5-year or 60,000-mile powertrain warranty, providing added confidence in the quality of the system. The brand also offers an exclusive Trade Up program, allowing customers to apply the original purchase amount toward a new Fabtech suspension system at a later time. This front leveling kit is engineered for the listed Toyota Tundra applications and is identified by Fabtech part number FTL5606. California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFitment: Designed for 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: Raises the front suspension by 1.5 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Heavy-duty design for dependable street, towing, hauling, and off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineering: Developed to maximize leveling height without ball joint, tie rod, or steering bind\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Includes Fabtech's free 5-year or 60,000-mile powertrain warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTrade Up Program: Original purchase amount may be applied toward a future Fabtech suspension system\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLift\/Drop Height: 1.5\u003c\/li\u003e\n\u003cli\u003ePart Number: FTL5606\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Capstone, Limited, Platinum, SR, SR5 – 1.5 in. Lift\u003c\/li\u003e\n\u003cli\u003e2022-2026 Toyota Tundra – 1794 Edition, Limited, Platinum, SR, SR5 – 1.5\" Leveling Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772309176429,"sku":"FTL5606","price":233.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/ftl5606-kit.jpg?v=1792239291"},{"product_id":"readylift-2-rear-spacer-kit-2022-2026-toyota-tundra-26-52200","title":"ReadyLift 2” Rear Spacer Kit 2022-2026 Toyota Tundra 26-52200","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e ReadyLift 26-52200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Component (in.):\u003c\/strong\u003e Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Height (in.):\u003c\/strong\u003e 2 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor \/ Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2” Rear Spacer Kit 2022-2026 Toyota Tundra\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReadyLIFT OEM-style rear spacer kit is now available for 2022-2026 Toyota Tundra applications. By popular request, we now offer the 2\" tall rear coil spring spacer from our 3\" SST lift kit separately. 26-52200 includes two laser cut fab steel rear coil spring spacers that install with no modifications and will help with providing extra rake and will safely lift the rear of your Tundra an additional 2\". Based on OEM designs and made from fabricated steel (never made from lightweight extrusions), ReadyLIFT Spacer Kits will put a slight rake back in your truck for hauling or towing and are designed to work in concert with your ReadyLIFT Suspension Leveling Kit. This is a great Tow Package upgrade. Like all ReadyLIFT products, these block kits come with our Lifetime Warranty.*Note: Kit does not fit Tundra TRD PRO, trucks equipped with Load-Leveling Rear Height Control Air Suspension. The factory TRD Skid plate will not bolt back up once the kit is installed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReadyLIFT OEM-style rear spacer kit is now available for 2022-2026 Toyota Tundra applications.\u003c\/li\u003e\n\u003cli\u003eBy popular request, we now offer the 2\" tall rear coil spring spacer from our 3\" SST lift kit separately.\u003c\/li\u003e\n\u003cli\u003e26-52200 includes two laser cut fab steel rear coil spring spacers that install with no modifications and will help with providing extra rake and will safely lift the rear of your Tundra an additional 2\".\u003c\/li\u003e\n\u003cli\u003eWill not work with stock shocks. You may need to source shock extensions or aftermarket shocks.\u003c\/li\u003e\n\u003cli\u003eNote: Kit does not fit Tundra TRD PRO, trucks equipped with Load-Leveling Rear Height Control Air Suspension. The factory TRD Skid plate will not bolt back up once the kit is installed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 26-52200\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Easy Do It Yourself (DIY)\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 1 Hour\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eNuts Included: Yes\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 Inches\u003c\/li\u003e\n\u003cli\u003eShocks Included: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903161434221,"sku":"2652200","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/26-52200-png.webp?v=1793333730"},{"product_id":"readylift-6-big-lift-kit-2022-2026-toyota-tundra-w-rear-coil-springs-2wd-4wd-44-52620","title":"ReadyLift 6\" Big Lift Kit - 2022-2026 Toyota Tundra W\/ Rear Coil Springs 2WD\/4WD 44-52620","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e ReadyLift 44-52620\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Component (in.):\u003c\/strong\u003e Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Height (in.):\u003c\/strong\u003e 6 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Component (in.):\u003c\/strong\u003e Coil Spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Height (in.):\u003c\/strong\u003e 6 Inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e6\" Big Lift Kit - 2022-2026 Toyota Tundra W\/ Rear Coil Springs 2WD\/4WD\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReadyLIFT announces two new suspension solutions for the 2022-UP Toyota Tundra with rear coil spring and factory air configurations: 6-inch lift kits. These kits, successful following the Tundra product line, feature Falcon 1.1 monotube shocks, designed for the 2022+ Toyota Tundra. The kits include strong, laser-cut, CNC bent, welded, boxed sub-frame drop assemblies for increased ground clearance and suspension geometry maintenance. The cast iron front knuckles, precision-designed, retain factory tie rods with minimal trimming. The innovative differential drop system ensures easy installation and correct positioning to maintain CV axle and driveline angles. Kits 44-52620 (non-rear air) and 44-52660 (with rear air) prevent premature tire wear by maintaining alignment and geometry. The system includes bump stop extensions and sway bar frame mount brackets for factory geometry retention. These features ensure superior driving and handling. The 6-inch Big Lift allows for 5.75\" backspace (18-20mm Offset) on 20x9 with 35\" tires and, with trimming, 5.5\" backspace (10-13mm Offset) on 20x9 with 37\" tires. It includes two Falcon 1.1 monotube rear shocks, retains the factory turning radius, and is compatible with stock 20-inch wheels. Not suitable for the 2022+ Tundra TRD Pro with Bilstein coilover shocks or the TRD rear sway bar option. The kits work only with factory 20\" wheels (not 18\" wheels), but most aftermarket wheels fit (confirm before installation).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAllows for 5.75\" backspace (1820mm Offset) on 20x9 with 35\" tires\u003c\/li\u003e\n\u003cli\u003eMax tire with trimming 5.5\" backspace (1013mm Offset) on 20x9 with 37\" tires\u003c\/li\u003e\n\u003cli\u003eIncludes two Falcon 1.1 monotube rear shocks\u003c\/li\u003e\n\u003cli\u003eRetains factory turning radius\u003c\/li\u003e\n\u003cli\u003eAllows for use of stock 20'' wheels\u003c\/li\u003e\n\u003cli\u003eWorks with auto adjust headlights\u003c\/li\u003e\n\u003cli\u003eNot compatible with 2022+ Tundra TRD Pro w\/ Bilstein coilover shocks, TRD rear sway bar option, or trucks equipped with LoadLeveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS)\u003c\/li\u003e\n\u003cli\u003eAllows for 5.75\"\" backspace (18 Allows for 5.75\"\" backspace (1820mm Offset) on 20x9 with 35\"\" tires\u003c\/li\u003e\n\u003cli\u003eMax tire with trimming 5.5\"\" backspace (10 Max tire with trimming 5.5\"\" backspace (1013mm Offset) on 20x9 with 37\"\" tires\u003c\/li\u003e\n\u003cli\u003eNot compatible with 2022+ Tundra TRD Pro w\/ Bilstein coilover shocks, TRD rear sway bar option, or trucks equipped with Load\u003c\/li\u003e\n\u003cli\u003eNot compatible with 2022+ Tundra TRD Pro w\/ Bilstein coilover shocks, TRD rear sway bar option, or trucks equipped with LoadLeveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS)\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 44-52620\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 6 Inches\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eFront Shocks: None\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 35 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 6 Inches\u003c\/li\u003e\n\u003cli\u003eRear Shocks: Falcon 1.1 Monotube\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903162155117,"sku":"4452620","price":2519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/44-52620-png.webp?v=1793333982"},{"product_id":"readylift-3-sst2-1-suspension-system-with-falcon-2-1-struts-shocks-toyota-tundra-2022-2026-62-52420","title":"ReadyLift 3\" SST2.1 Suspension System With Falcon 2.1 Struts\/Shocks - Toyota Tundra 2022-2026 62-52420","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e ReadyLift 62-52420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Component (in.):\u003c\/strong\u003e Coilover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Height (in.):\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Component (in.):\u003c\/strong\u003e Coil Spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Height (in.):\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor \/ Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e3\" SST2.1 Suspension System With Falcon 2.1 Struts\/Shocks - Toyota Tundra 2022-2026\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnleash the Next Level in Lifted Performance with ReadyLIFT’s All-New 3” SST2.1 Suspension System for 2022+ Toyota Tundra! ReadyLIFT is proud to introduce the 62-52420 3” SST2.1 Suspension System, engineered to elevate your 2022+ Toyota Tundra’s performance, style, and capabilities to unprecedented levels. This cutting-edge suspension kit redefines what’s possible for a lifted Tundra, delivering a bold stance, superior handling, and the rugged durability ReadyLIFT is known for. At the heart of this system are Falcon 2.1 Series front replacement struts and rear shocks, designed to transform your Tundra into the ultimate street and trail performer. With enhanced ride quality, improved handling, and the ability to fit up to 35x12.50 tires, this premium lift not only looks aggressive, but it’s also built to conquer any terrain.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReady to elevate Tundra’s to a whole new level? The all-new ReadyLIFT 62-52420 3\" SST2.1 Suspension System is here to redefine what’s possible.\u003c\/li\u003e\n\u003cli\u003eDesigned for 2022-2026 Toyota Tundra’s, this premium lift kit delivers an aggressive stance without sacrificing the factory ride quality you rely on.\u003c\/li\u003e\n\u003cli\u003e• Falcon 2.1 Series Suspension System – A ride quality upgrade you can feel every mile.\u003c\/li\u003e\n\u003cli\u003e• HD Full-Coverage Front Skid Plate – Protects your differential and engine without compromising service access.\u003c\/li\u003e\n\u003cli\u003e• 1.5\" Upper Control Arms – Corrected ball joint angles for maximum articulation.\u003c\/li\u003e\n\u003cli\u003e• High-Angle CV Axles – Engineered for maximum suspension travel, reduced vibration, and superior durability.\u003c\/li\u003e\n\u003cli\u003e• Custom Steering Stops – Ensures the integrity of your CV axle under all suspension cycles.\u003c\/li\u003e\n\u003cli\u003e• Fit up to 35x12.50 tires with 18\"x9\" wheels and +12mm offset.\u003c\/li\u003e\n\u003cli\u003eNote: This kit is not compatible with Tundra’s equipped with air ride, TRD Pro, or AVS systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 62-52420\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Coilover\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eFront Shocks: Falcon 2.1\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 35\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2\u003c\/li\u003e\n\u003cli\u003eRear Shocks: Falcon 2.1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903163433069,"sku":"6252420","price":3419.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/62-52420-png.webp?v=1793333652"},{"product_id":"readylift-2-rear-block-kit-toyota-tundra-1995-2021-tacoma-1995-2023-66-5002","title":"ReadyLift 2\" Rear Block Kit - Toyota Tundra 1995-2021 \/ Tacoma 1995-2023 66-5002","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2000-2023 Toyota Tundra, 1995-2023 Toyota Tacoma (full list below)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e ReadyLift 66-5002\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2\" Rear Block Kit - Toyota Tundra 1995-2021 \/ Tacoma 1995-2023\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReadyLIFT OEM-style rear block kits are available for 1995-2023 Tacoma six-lug model and 1999-2021 Tundra applications. These Rear Block Kits include two (2) 2\" Rear Blocks, four (4) E-Coated U-Bolts, eight (8) Nuts and Washers and will safely lift the rear of your truck an additional 2\". Based on OEM designs and made from cast iron (never made out of light weight extrusions), ReadyLIFT Block Kits will put a slight rake back in your truck for hauling or towing and are designed to work in concert with your ReadyLIFT Suspension Leveling Kit. This is a great Tow Package upgrade. Like all ReadyLIFT products, these block kits come with our Lifetime Warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2\" rear lift blocks made of OEM style cast iron\u003c\/li\u003e\n\u003cli\u003eComes with longer ubolts for easy installation\u003c\/li\u003e\n\u003cli\u003eCompatible with both 2WD and 4WD trucks\u003c\/li\u003e\n\u003cli\u003eFits Toyota Tundra trucks from 1999-2021\u003c\/li\u003e\n\u003cli\u003eFits Toyota Tacoma trucks from 1995-2023\u003c\/li\u003e\n\u003cli\u003eComes with longer u Comes with longer ubolts for easy installation\u003c\/li\u003e\n\u003cli\u003eFits Toyota Tacoma trucks from 1995 Fits Toyota Tacoma trucks from 1995-2023\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 66-5002\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 2 Hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903170543725,"sku":"665002","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/RL-2-REAR-BLOCK-KIT-TOYOTA.webp?v=1793333882"},{"product_id":"readylift-2-front-leveling-kit-with-diff-drops-toyota-tundra-2022-2026-66-52201","title":"ReadyLift 2\" Front Leveling Kit With Diff Drops- Toyota Tundra 2022-2026 66-52201","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2023-2026 Toyota Sequoia, 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e ReadyLift 66-52201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Component (in.):\u003c\/strong\u003e Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Height (in.):\u003c\/strong\u003e 2 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor \/ Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2\" Front Leveling Kit With Diff Drops- Toyota Tundra 2022-2026\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReadyLIFT leveling kits are the fastest, safest, most cost-effective way to bring the front of your vehicle level with the rear for that ideal lifted neutral stance. Our front strut assembly eliminates the hassle, time, and concern of compressing springs. A ReadyLIFT leveling kit will maintain a smooth OEM ride without adding stress to stock suspension components! The all-new part number 66-52201 2022-2026 Toyota Tundra Leveling Kit is an excellent choice for those who want a level stance while running larger tires up to 34 inches. The no-trim maximum tire size for this kit is a 295-60R20 with a 20\" X 9\" wheel and +18 offset. Drops front differential to provide better maximum operating angle for CV joints\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2\" Leveling Kit - Max Tire Diameter 34\"\u003c\/li\u003e\n\u003cli\u003eNo-trim maximum tire size for this kit is a 295-60R20 with a 20\" X 9\" wheel and +18 offset.\u003c\/li\u003e\n\u003cli\u003eFabricated steel front strut spacers with durable black powder coat finish\u003c\/li\u003e\n\u003cli\u003eDrops front differential to provide better maximum operating angle for CV joints\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings prevent differential movement under load\u003c\/li\u003e\n\u003cli\u003e100% Bolt-on with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eCNC laser cut steel brackets\u003c\/li\u003e\n\u003cli\u003eNote: Not for use on Tundra equipped factory rear air, TRD PRO.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 66-52201\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2 Inches\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Intermediate Requires some Automotive knowledge\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 3 Hours\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 295\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903170642029,"sku":"6652201","price":319.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/66-52201-1-jpg.webp?v=1793333966"},{"product_id":"readylift-2-sst-lift-kit-with-diff-drops-2022-2026-toyota-tundra-rear-air-69-52221","title":"ReadyLift 2\" SST Lift Kit With Diff Drops - 2022-2026 Toyota Tundra Rear Air 69-52221","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e ReadyLift 69-52221\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Component (in.):\u003c\/strong\u003e Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Height (in.):\u003c\/strong\u003e 2 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Component (in.):\u003c\/strong\u003e Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Height (in.):\u003c\/strong\u003e 1 Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor \/ Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2\" SST Lift Kit With Diff Drops - 2022-2026 Toyota Tundra Rear Air\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReadyLIFT has tremendous success on our leveling and SST lift kits for the 2022-2026 Toyota Tundra. We are excited to introduce a new 2\" SST Lift for the 2022-2026 Tundra equipped with Load-Leveling Rear Height Control Air Suspension and Adaptive Variable Suspension (AVS). This new kit gives you that level but slight lift on all four corners of the air-equipped trucks. This new kit is the fastest, safest, and least expensive way to bring the front of your vehicle level with the rear for that ideal lifted stance. Our front strut spacer eliminates the hassle, time, and concern of compressing springs while our rear airbag spacers allow the user to still get the full range of use from the rear air system. Included in the kit you will get shock extensions, brake line spacers and brackets, and a slotted rear ride-height sensor bracket for personal adjustments. The all-new part number 69-52221 2022-2026 Toyota Tundra 2\" SST Lift Kit is an excellent choice for those who want a slight lift but a level stance while running larger tires up to 34 inches. The no-trim maximum tire size for this kit is a 295-60R20 with a 20\" X 9\" wheel and +18 offset. Drops front differential to provide better maximum operating angle for CV joints Polyurethane bushings prevent differential movement under load 100% Bolt-on with no cutting or welding CNC laser cut steel brackets\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMax Tire Diameter 34\"\u003c\/li\u003e\n\u003cli\u003eFabricated steel front strut spacers and rear airbag spacers\u003c\/li\u003e\n\u003cli\u003eRear shock extensions\u003c\/li\u003e\n\u003cli\u003eAirbag ride-height sensor bracket\u003c\/li\u003e\n\u003cli\u003eDrops front differential to provide better maximum operating angle for CV joints\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings prevent differential movement under load\u003c\/li\u003e\n\u003cli\u003e100% Bolt-on with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eCNC laser cut steel brackets\u003c\/li\u003e\n\u003cli\u003eNote: Not for use on Tundra Coil Spring trucks 1974 Edition with Fox Shocks 1.1 inch lift, and TRD PRO. Kit does cover the i-Force Max V6 Hybrid.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 69-52221\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2 Inches\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Intermediate Requires some Automotive knowledge\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 4 Hours\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 34 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903183781997,"sku":"6952221","price":629.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/69-52221-1-jpg.webp?v=1793333739"},{"product_id":"readylift-3-sst-lift-kit-2022-2026-toyota-tundra-2wd-4wd-69-52310","title":"ReadyLift 3\" SST Lift Kit - 2022-2026 Toyota Tundra 2WD\/4WD 69-52310","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e ReadyLift 69-52310\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Component (in.):\u003c\/strong\u003e Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Height (in.):\u003c\/strong\u003e 3 Inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Component (in.):\u003c\/strong\u003e Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Height (in.):\u003c\/strong\u003e 2 Inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e3\" SST Lift Kit - 2022-2026 Toyota Tundra 2WD\/4WD\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eToyota's newest Tundra has become a popular choice for new truck owners. And like the Tundra's before it, new 2022-2026 owners want a quality bolt-on mild lift system that will increase ground clearance and add room for larger wheels and tires, all while maintaining the great factory ride and handling. Introducing the ReadyLIFT 69-52310 3\" SST Lift Kit exclusively engineered for the new 2022-2026 Toyota Tundra pickups. This new SST lift kit is a second-generation version of our popular 69-5475 3\" SST lift kit for the 2021 and older models. Many of the same premium features found in that kit have migrated to the new 69-52310 kit such as our popular tubular control arms with corrected ball joint pivot angles. Fabricated steel front strut spacers 1.26\" tall precision fabricated steel rear lift spacers with new longer U-bolts give the 2022-2026 Tundra a nice, nearly level stance with 3\" of lift in front, and the kit includes new rear shock extensions so you can retain use of your factory rear shocks. The all-new 69-52310 2022-2026 Toyota Tundra 3\" SST lift kit is an excellent choice for those who want to run larger tires such as 35s. The maximum tire size for use with this kit is a 35x12.5 on a 18\"x9\" wide wheel with +12 offset.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2022-2026 Tundra 2WD\/4WD model\u003c\/li\u003e\n\u003cli\u003e3\" SST lift kit\u003c\/li\u003e\n\u003cli\u003eBolton installation\u003c\/li\u003e\n\u003cli\u003eNo modifications required\u003c\/li\u003e\n\u003cli\u003e3\" front lift with 1.26\" rear spacer kit\u003c\/li\u003e\n\u003cli\u003eCompatible with up to 35x12.50 tall tires\u003c\/li\u003e\n\u003cli\u003eDesigned for use with 18\"x9\" wide wheels with +12mm offset\u003c\/li\u003e\n\u003cli\u003eIncludes tubular steel Control Arms with heavyduty ball joints\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eMaintains factory ride\u003c\/li\u003e\n\u003cli\u003eNot compatible with Tundra TRD PRO or trucks with LoadLeveling Rear Height Control Air Suspension\u003c\/li\u003e\n\u003cli\u003eFactory TRD Skid plate cannot be reinstalled after installation of kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 69-52310\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3 Inches\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 35 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 Inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903183847533,"sku":"6952310","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/69-52310-png.webp?v=1793333739"},{"product_id":"readylift-3-0-sst-lift-kit-front-with-1-26-rear-with-upper-control-arms-with-cv-axle-69-52311-for-2022-2025-69-52311","title":"ReadyLift 3.0'' SST Lift Kit Front with 1.26'' Rear with Upper Control Arms with CV Axle 69-52311 for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e ReadyLift 69-52311\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Component (in.):\u003c\/strong\u003e Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Height (in.):\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Component (in.):\u003c\/strong\u003e Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Height (in.):\u003c\/strong\u003e 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor \/ Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e3.0'' SST Lift Kit Front with 1.26'' Rear with Upper Control Arms with CV Axle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eToyota’s newest Tundra has quickly become a favorite among truck owners, and just like previous generations, 2022+ Tundra drivers are looking for a premium, bolt-on lift system that delivers increased ground clearance, room for larger tires, and a leveled stance—all while preserving the factory ride and handling.* ReadyLIFT is proud to introduce the new 69-52311 3” SST Lift Kits, now featuring our all-new CV Axle Kit upgrade—engineered to handle extreme 4WD conditions with unmatched durability and reliability. Whether you're navigating rocky trails or heading out for a weekend adventure, these high-angle CV axles provide maximum travel, reduced vibration, and long-lasting performance to keep your Tundra ready for anything. · Updated tubular steel control arms with corrected ball joint pivot angles for optimal suspension performance.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2022-2026 Tundra 2WD\/4WD - 3\" SST Lift Kit Bolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo modifications required.\u003c\/li\u003e\n\u003cli\u003e3\" front lift with a 2\" tall rear spacer kit.\u003c\/li\u003e\n\u003cli\u003eAllows for up to 35x12.50 tall tires when used on 18\"x9\" wide wheels with a +12mm offset.\u003c\/li\u003e\n\u003cli\u003eIncludes strong tubular steel Control Arms with heavy-duty ball joints.\u003c\/li\u003e\n\u003cli\u003eNo Cutting of OEM Parts or Welding Maintains Factory Ride\u003c\/li\u003e\n\u003cli\u003eNew CV Axle Kit 67-52420CV enhancing shaft strength.\u003c\/li\u003e\n\u003cli\u003e*Note: Kit does not fit Tundra TRD PRO, trucks equipped with Load-Leveling Rear Height Control Air Suspension. The factory TRD Skid plate will not bolt back up once the kit is installed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 69-52311\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 35\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1.5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903183913069,"sku":"6952311","price":1369.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/69-52311-1-png.webp?v=1793333740"},{"product_id":"readylift-3-sst-lift-kit-equipped-with-load-leveling-rear-height-control-air-suspension-or-adaptive-variable-69-52331","title":"ReadyLift 3'' SST Lift Kit equipped with Load-Leveling Rear Height Control Air Suspension or Adaptive Variable 69-52331 for 2022-2026 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 2022-2026 Toyota Tundra (full list below)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Part #:\u003c\/strong\u003e ReadyLift 69-52331\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Component (in.):\u003c\/strong\u003e Spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Lift Height (in.):\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lift Height (in.):\u003c\/strong\u003e 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor \/ Finish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e3'' SST Lift Kit equipped with Load-Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS) and CV Axle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eToyota’s newest Tundra has quickly become a favorite among truck owners, and just like previous generations, 2022+ Tundra drivers are looking for a premium, bolt-on lift system that delivers increased ground clearance, room for larger tires, and a leveled stance—all while preserving the factory ride and handling.* ReadyLIFT is proud to introduce the new 69-52331 3” SST Lift Kits, now featuring our all-new CV Axle Kit upgrade—engineered to handle extreme 4WD conditions with unmatched durability and reliability. Whether you're navigating rocky trails or heading out for a weekend adventure, these high-angle CV axles provide maximum travel, reduced vibration, and long-lasting performance to keep your Tundra ready for anything. · Updated tubular steel control arms with corrected ball joint pivot angles for optimal suspension performance.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2.5 for 2026 4runner\u003c\/li\u003e\n\u003cli\u003e3” SST Lift Kit Features and Benefits:;\u003c\/li\u003e\n\u003cli\u003e- 3” Lift allows for up to 35x12.50 tall tires when used on 18\"x9\" wide wheels with a +12mm offset\u003c\/li\u003e\n\u003cli\u003e- Maintains full operation and range of OEM load-leveling system\u003c\/li\u003e\n\u003cli\u003e- Retains factory turning radius\u003c\/li\u003e\n\u003cli\u003e- Allows for use of stock 20” wheels\u003c\/li\u003e\n\u003cli\u003e- New CV Axle Kit 67-52420CV enhancing shaft strength.\u003c\/li\u003e\n\u003cli\u003eNOTE: Not for use on 2022+ Tundra TRD Pro w\/ Bilstein coilover shocks, the TRD rear sway bar option.\u003c\/li\u003e\n\u003cli\u003eOnly work with factory 20\" wheels - will not work with factory 18\" wheels. Most aftermarket wheels are compatible (confirm fitment prior to installation).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 69-52331\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 35\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1.5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903183978605,"sku":"6952331","price":1369.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/69-52331-1-jpg.webp?v=1793333741"}],"url":"https:\/\/truckarmy.com\/collections\/2023-toyota-tundra-lift-leveling-kits.oembed","provider":"Truck Army","version":"1.0","type":"link"}