{"title":"2025 Ford Bronco Lift \u0026 Leveling Kits","description":"\u003cp\u003eLeveling kits and lift kits for the 2025 Ford Bronco from Fabtech, ReadyLift and Zone Offroad, to level out the factory rake or make room for bigger tires.\u003c\/p\u003e\u003cp\u003e2025 Broncos carry the same body with simplified trims. The Bronco Raptor has wider fenders and unique suspension, so standard lift kits and flares do not fit it.\u003c\/p\u003e\u003cp\u003eEvery part here is matched to the 2025 Ford Bronco with manufacturer fitment data. Select your trim, cab and bed in the vehicle bar above to see only what fits. Also shop \u003ca href=\"\/collections\/2025-ford-bronco-parts-accessories\"\u003eall 2025 Ford Bronco parts\u003c\/a\u003e or \u003ca href=\"\/collections\/ford-bronco-lift-leveling-kits\"\u003eFord Bronco lift \u0026amp; leveling kits for every year\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"fabtech-k2396dl-6-inch-lift-kit-with-dirt-logic-2-5-reservoir-coilovers-for-2021-2026-ford-bronco","title":"Fabtech K2396DL 6-Inch Lift Kit with Dirt Logic 2.5 Reservoir Coilovers for 2021-2026 Ford Bronco","description":"\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2396DL 6-Inch Lift Kit, engineered for demanding off-road performance and dependable on-road handling. This suspension system is designed to accommodate 38-inch or 40-inch tires while helping maintain proper factory alignment characteristics. Heavy-duty construction and carefully matched suspension components provide the added clearance and strength needed for trail use, rocky terrain, and challenging muddy conditions.\u003cbr\u003eThe kit features Fabtech Dirt Logic 2.5 reservoir coilovers, which are built to deliver consistent damping performance and reliable control during aggressive driving. Constructed with 1\/4-inch-thick steel components, the system is designed to withstand the stresses of off-road use. Included skid plates add protection for vulnerable underbody areas, helping shield critical components from trail debris and obstacles. The result is a complete lift solution that combines increased ground clearance with robust suspension performance.\u003cbr\u003eFabtech K2396DL is engineered specifically for Ford Bronco applications from 2021 through 2026 and is FMVSS 126 certified. The kit is backed by a 5-year or 60,000-mile powertrain warranty, providing additional confidence for daily driving and off-road adventures. Professional installation is recommended to ensure proper fitment, alignment, and suspension setup. This lift kit is intended for drivers seeking a stronger, higher-clearance Bronco suspension system with the capability to support larger tires and demanding trail conditions. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Fits 2021-2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: Provides 6 inches of suspension lift\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Clearance: Designed to accommodate 38-inch or 40-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Made with heavy-duty 1\/4-inch-thick steel components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoilovers: Includes Dirt Logic 2.5 reservoir coilovers for controlled suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtection: Includes skid plates to help protect underbody components during off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCertification: FMVSS 126 certified\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Backed by a 5-year or 60,000-mile powertrain warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: Fabtech K2396DL\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 6\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2396DL\u003cbr\u003e\nPart Number: K2396DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771575435373,"sku":"K2396DL","price":4725.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2396dl-beauty-02.jpg?v=1792224587"},{"product_id":"fabtech-k2395dl-5-inch-6-inch-lift-kit-with-dirt-logic-2-5-reservoir-coilovers-for-2021-2026-ford-bronco","title":"Fabtech K2395DL 5-Inch\/6-Inch Lift Kit with Dirt Logic 2.5 Reservoir Coilovers for 2021-2026 Ford Bronco","description":"\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2395DL 5-inch\/6-inch Lift Kit, engineered for demanding off-road performance and dependable on-road handling. Built from durable 1\/4-inch-thick steel, this suspension system delivers the strength needed for challenging trails while providing clearance for 38-inch or 40-inch tires. The kit is designed to help maintain factory alignment characteristics, supporting predictable handling and stability across varied terrain.\u003c\/p\u003e\n\u003cp\u003eThe Fabtech K2395DL includes Dirt Logic 2.5 reservoir coilovers that provide reliable suspension performance during extended off-road use. Integrated skid plates add protection for vulnerable underbody components when navigating rocks, ruts, and uneven surfaces. With its combination of increased ground clearance, heavy-duty construction, and performance-focused shocks, this lift kit is suited for Bronco owners who want to tackle technical trails without sacrificing everyday drivability.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the Ford Bronco, this Fabtech lift kit offers a complete suspension upgrade backed by FMVSS 126 certification. Professional installation is recommended to ensure proper fitment, alignment, and suspension setup. The kit is compatible with 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLift Height: Provides approximately 5 inches of suspension lift for increased ground clearance\u003c\/li\u003e\n\u003cli\u003eTire Clearance: Designed to accommodate 38-inch or 40-inch tires under the fenders\u003c\/li\u003e\n\u003cli\u003eConstruction: Made with durable 1\/4-inch-thick steel for enhanced strength and durability\u003c\/li\u003e\n\u003cli\u003eCoilovers: Includes Dirt Logic 2.5 reservoir coilovers for reliable off-road suspension performance\u003c\/li\u003e\n\u003cli\u003eProtection: Includes skid plates to help shield underbody components from trail hazards\u003c\/li\u003e\n\u003cli\u003eAlignment: Designed to help maintain factory alignment characteristics after installation\u003c\/li\u003e\n\u003cli\u003eCertification: FMVSS 126 certified for confidence in vehicle stability performance\u003c\/li\u003e\n\u003cli\u003eFitment: Fits 2021-2026 Ford Bronco models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 5\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2395DL\u003cbr\u003e\nPart Number: K2395DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771576418413,"sku":"K2395DL","price":5357.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2395dl-beauty-02.jpg?v=1792224605"},{"product_id":"fabtech-k2391-5-inch-6-inch-lift-kit-with-dirt-logic-2-5-reservoir-coilovers-for-2021-2026-ford-bronco","title":"Fabtech K2391 5-Inch\/6-Inch Lift Kit with Dirt Logic 2.5 Reservoir Coilovers for 2021-2026 Ford Bronco","description":"\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2391 Lift Kit, engineered for demanding off-road performance and dependable on-road handling. This suspension system provides approximately 5 inches of lift and is designed to accommodate 38-inch or 40-inch tires while helping maintain factory alignment characteristics. Heavy-duty 1\/4-inch steel construction delivers the strength needed for rocky trails, muddy terrain, and other challenging driving conditions.\u003cbr\u003eThe kit includes Dirt Logic 2.5 reservoir coilovers, which are built to provide reliable damping performance and improved suspension control during extended off-road use. Integrated skid plates add protection for vulnerable underbody components, helping shield your Bronco from rocks, debris, and trail obstacles. The result is a balanced suspension upgrade that supports increased ground clearance without sacrificing confidence behind the wheel.\u003cbr\u003eFabtech part number K2391 is designed for Ford Bronco models from 2021 through 2026. The suspension system is FMVSS 126 certified and backed by a 5-year or 60,000-mile powertrain warranty, providing additional assurance for your vehicle upgrade. Professional installation is recommended, and freight delivery may be required due to the size and weight of the kit. California Proposition 65 warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for 2021-2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: Provides approximately 5 inches of suspension lift\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Clearance: Supports 38-inch or 40-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Built from heavy-duty 1\/4-inch steel for enhanced strength\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping System: Includes Dirt Logic 2.5 reservoir coilovers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUnderbody Protection: Includes skid plates to help protect critical components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAlignment: Designed to help maintain factory alignment characteristics\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCertification: FMVSS 126 certified\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Includes a 5-year or 60,000-mile powertrain warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: Fabtech K2391\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 5\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2391\u003cbr\u003e\nPart Number: K2391\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771577499757,"sku":"K2391","price":2181.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2391-beauty-02.jpg?v=1792224623"},{"product_id":"fabtech-k2390dl-uniball-uca-lift-system-with-shocks-for-2021-2026-ford-bronco","title":"Fabtech K2390DL Uniball UCA Lift System with Shocks for 2021–2026 Ford Bronco","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade your 2021–2026 Ford Bronco with the Fabtech K2390DL Uniball UCA Lift System with Shocks. Designed for enthusiasts who demand dependable suspension performance, this system combines engineered lift components with shocks to improve clearance, handling, and off-road capability. Fabtech applies more than 20 years of aftermarket suspension experience, advanced design software, precision fabrication equipment, and rigorous testing to develop products built for demanding driving conditions.\u003cbr\u003eThe Fabtech K2390DL system features upper control arms designed to eliminate the factory-style upper ball joint, supporting improved suspension geometry and durable operation after lifting. With a 4-inch lift height, the kit provides additional ground clearance and helps accommodate larger tires while maintaining a purposeful, well-engineered suspension setup. The included shocks are matched to the lift system for controlled damping and enhanced ride quality on pavement, trails, and rough terrain.\u003cbr\u003eFabtech suspension components are developed by experienced engineers and fabricators with a focus on fit, function, and long-term reliability. The K2390DL is intended for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models, making it a practical choice for drivers seeking a complete lift solution from a recognized suspension brand. Professional installation is recommended, and alignment should be performed after installation. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2390DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Uniball upper control arm lift system with shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 4 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Control Arms: Designed to eliminate the upper ball joint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Design: Engineered and tested for off-road performance and dependable operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation and post-installation alignment recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 4\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2390DL\u003cbr\u003e\nPart Number: K2390DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771578220653,"sku":"K2390DL","price":5203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2390dl-beauty-2.jpg?v=1792224634"},{"product_id":"fabtech-k2389dl-uniball-uca-3-inch-lift-system-with-shocks-for-2021-2026-ford-bronco","title":"Fabtech K2389DL Uniball UCA 3-Inch Lift System with Shocks for 2021-2026 Ford Bronco","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2389DL Uniball UCA Lift System with Shocks. Designed for a 3-inch lift, this suspension kit combines uniball upper control arms with matched shocks to improve suspension performance, ground clearance, and off-road capability. The upper control arms eliminate the factory upper ball joint, providing a durable and purpose-built solution for lifted applications.\u003cbr\u003eFabtech draws on more than 20 years of aftermarket suspension development experience to engineer products for demanding off-road use. Advanced design software, precision fabrication equipment, experienced engineers, and rigorous testing support the development of the K2389DL suspension system. The result is a carefully engineered upgrade designed to deliver reliable performance and proper suspension geometry on lifted Ford Bronco models.\u003cbr\u003eThe Fabtech K2389DL kit is engineered specifically for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco applications. It is a practical choice for enthusiasts seeking improved suspension travel and dependable performance while maintaining a professionally designed suspension package. Professional installation is recommended, and additional components or alignment adjustments may be required depending on the vehicle configuration and intended use. This product contains a California Proposition 65 warning: Cancer and Reproductive Harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3-inch lift system designed to improve ground clearance and off-road capability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniball upper control arms eliminate the factory upper ball joint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes shocks matched to the Fabtech suspension system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineered for 2021-2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned and tested by Fabtech for demanding off-road applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2389DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 3\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2389DL\u003cbr\u003e\nPart Number: K2389DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771579170925,"sku":"K2389DL","price":5203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2389dl-beauty-2.jpg?v=1792224650"},{"product_id":"fabtech-k2385dl-uniball-uca-lift-system-with-shocks-for-2021-2026-ford-bronco","title":"Fabtech K2385DL Uniball UCA Lift System with Shocks for 2021-2026 Ford Bronco","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2385DL Uniball UCA Lift System with Shocks. Designed for off-road enthusiasts who demand improved ground clearance, suspension performance, and durability, this complete lift system combines Fabtech’s uniball upper control arms with matched shocks for a balanced suspension upgrade. The system provides a 4-inch lift while helping maintain dependable handling across demanding trails and varied terrain.\u003c\/p\u003e\n\u003cp\u003eFabtech develops its suspension components using advanced design software, precision fabrication equipment, extensive testing, and years of aftermarket suspension experience. The K2385DL replaces the factory upper ball joint arrangement with uniball upper control arms engineered for increased strength and articulation. This design supports improved suspension movement and reliable performance during off-road use, while the included shocks help control suspension travel for a more composed ride.\u003c\/p\u003e\n\u003cp\u003eBuilt for the Ford Bronco platform, this Fabtech lift system is a practical choice for drivers seeking enhanced off-road capability without compromising suspension engineering. The components are designed to work together as a complete system, helping provide consistent performance and a durable foundation for larger tires and additional trail-focused upgrades. Professional installation is recommended to ensure proper setup, alignment, and suspension operation.\u003c\/p\u003e\n\u003cp\u003eFitment includes 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\n\u003cli\u003ePart Number: K2385DL\u003c\/li\u003e\n\u003cli\u003eProduct Type: Uniball upper control arm lift system with shocks\u003c\/li\u003e\n\u003cli\u003eApplication: 2021-2026 Ford Bronco\u003c\/li\u003e\n\u003cli\u003eLift Height: 4 inches\u003c\/li\u003e\n\u003cli\u003eSuspension Design: Upper control arms eliminate the factory upper ball joint\u003c\/li\u003e\n\u003cli\u003ePerformance: Engineered for improved off-road suspension travel, control, and durability\u003c\/li\u003e\n\u003cli\u003eInstallation: Professional installation and alignment are recommended\u003c\/li\u003e\n\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 4\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2385DL\u003cbr\u003e\nPart Number: K2385DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771581268077,"sku":"K2385DL","price":5203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2385dl-beauty-02.jpg?v=1792224691"},{"product_id":"zone-offroad-zonf1221-2-inch-lift-kit-for-ford-bronco-badlands-and-sasquatch","title":"Zone Offroad ZONF1221 2-Inch Lift Kit for Ford Bronco Badlands and Sasquatch","description":"Zone 2\" Lift Kit\n\u003cp\u003eUpgrade the stance and off-road capability of your 2021–2025 Ford Bronco with the Zone Offroad ZONF1221 2-Inch Lift Kit. Designed for Badlands models and Sasquatch-equipped Broncos, this suspension lift kit raises the front by 2 inches and the rear by 1 inch to reduce the factory nose-down rake while creating clearance for tires up to 35 inches. The kit is engineered around the Bronco’s four-corner coilover suspension to preserve ride quality, handling, and everyday drivability.\u003cbr\u003eThe ZONF1221 uses top-mounted front strut spacers and front spring perch spacers to provide lift and leveling without replacing the factory coilovers. Heavy-duty, semi-aromatic glass-fiber-reinforced nylon spacers deliver strength and a clean original-equipment appearance after installation. Included bump stop extensions help maintain appropriate suspension, steering, and driveline operating angles during demanding off-road use, while replacement hardware supports a secure installation.\u003cbr\u003eThis Zone Offroad lift kit is designed for bolt-on installation using basic hand tools, with no welding or metal cutting required. Installation typically takes 2–3 hours and has a difficulty rating of 2 out of 5. Step-by-step instructions are included to help streamline the installation process. Optional Zone Adventure Pro Series Upper Control Arms are available separately for additional strength and suspension performance. Compatible wheel and tire combinations include 35 x 12.5-inch tires with 17 x 9-inch wheels or 20 x 9-inch wheels, subject to vehicle configuration and clearance considerations. California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFits 2021–2025 Ford Bronco models, including Badlands and Sasquatch-equipped applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides a 2-inch front lift and 1-inch rear lift\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLevels the vehicle stance and reduces the factory nose-down rake\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCreates clearance for tires up to 35 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUses top-mounted front strut spacers and spring perch spacers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintains factory ride quality and everyday drivability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes bump stop extensions for improved suspension and driveline geometry\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstructed from heavy-duty glass-fiber-reinforced nylon resin\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolt-on installation requires no welding or metal cutting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEstimated installation time is 2–3 hours\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation difficulty is rated 2 out of 5\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes replacement hardware and step-by-step instructions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with 17 x 9-inch and 20 x 9-inch wheel applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional Adventure Pro Series Upper Control Arms are available separately\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nBack Spacing: 5-5.5\"\u003cbr\u003e\nBack Spacing 2: 5\"-6\"\u003cbr\u003e\nInstallation Time: 2 -3hrs\u003cbr\u003e\nAdjustable: No\u003cbr\u003e\nFront Lift Height: 2\"\u003cbr\u003e\nRear Lift Height: 1\"\u003cbr\u003e\nFront Lift Method: Strut Spacers\u003cbr\u003e\nLift Type: Lift Kit\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nMax Tire Size: 35 x 12.5\u003cbr\u003e\nMax Tire Size 2: 35 x 11.2\"\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nRequires Welding: No\u003cbr\u003e\nWheel Size: 17 x 9\u003cbr\u003e\nWheel Size 2: 20 x 9\u003cbr\u003e\nInstallation Difficulty: 2 out of 5\u003cbr\u003e\nRequired Tools: Basic Hand Tools\u003cbr\u003e\nAaiaid Part Number: FQMSZONF1221\u003cbr\u003e\nPart Number: ZONF1221\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771581562989,"sku":"ZONF1221","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/F1221_03.jpg?v=1792224698"},{"product_id":"fabtech-k2384-uniball-upper-control-arm-lift-kit-for-2021-2026-ford-bronco","title":"Fabtech K2384 Uniball Upper Control Arm Lift Kit for 2021–2026 Ford Bronco","description":"Uniball UCA Lift Kit\n\u003cp\u003eUpgrade the front suspension of your 2021–2026 Ford Bronco with the Fabtech K2384 Uniball Upper Control Arm Lift Kit. Designed as a durable replacement for factory ball-joint upper control arms, this kit increases strength and provides reliable performance during demanding off-road use. The arms also add caster compared with the stock configuration, helping improve on-road handling and alignment when running oversized tires on lifted or modified vehicles.\u003cbr\u003eFabtech builds the K2384 upper control arms from .120-inch-wall, 1.50-inch-outside-diameter 4130 chromoly tubing for rugged strength and long-term durability. Each arm uses an American-made 1-inch FK stainless steel PTFE-lined uniball to support smooth, dependable suspension movement. Heat-treated 17-4 stainless steel uniball pins fit the factory ball-joint tapers without requiring spindle modification, allowing the suspension to be returned to stock configuration when needed. Matching 17-4 stainless steel misalignment spacers provide proper clearance throughout the full range of suspension travel.\u003cbr\u003eOn the frame side, durable urethane bushings help reduce road noise while supporting consistent performance over time. This Fabtech uniball UCA kit is engineered for drivers who want a stronger, more capable alternative to stock upper control arms without sacrificing practical street manners. It fits 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDesigned for 2021–2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides increased front suspension strength for aggressive off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdds caster compared with factory upper control arms for improved oversized-tire handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstructed from .120-inch-wall, 1.50-inch-outside-diameter 4130 chromoly tubing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes American-made 1-inch FK stainless steel PTFE-lined uniballs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003es heat-treated 17-4 stainless steel uniball pins that fit factory ball-joint tapers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUses 17-4 stainless steel misalignment spacers for proper uniball clearance through suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes durable urethane frame-side bushings to help reduce road noise\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupports installation without spindle modification\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2384\u003cbr\u003e\nPart Number: K2384\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771582251117,"sku":"K2384","price":1227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2384-beauty-02.jpg?v=1792224709"},{"product_id":"fabtech-k2383-uniball-upper-control-arm-lift-kit-for-2021-2026-ford-bronco","title":"Fabtech K2383 Uniball Upper Control Arm Lift Kit for 2021-2026 Ford Bronco","description":"Uniball UCA Lift Kit\n\u003cp\u003eUpgrade the front suspension of your 2021-2026 Ford Bronco with the Fabtech K2383 Uniball Upper Control Arm Lift Kit. Designed for demanding off-road use, this kit replaces the factory upper control arms and ball joints with heavy-duty components engineered for improved strength, durability, and suspension performance. It is an effective upgrade for stock or lifted Broncos running oversized tires.\u003c\/p\u003e\n\u003cp\u003eEach Fabtech upper control arm is constructed from 1.50-inch outside-diameter 4130 chromoly tubing with a 0.120-inch wall for rugged durability. The arms use American-made 1-inch FK stainless steel PTFE-lined uniballs, along with heat-treated 17-4 stainless steel uniball pins that fit the factory ball joint tapers without requiring spindle modification. This design allows the suspension to be returned to its stock configuration when needed.\u003c\/p\u003e\n\u003cp\u003eAdditional caster compared with the factory arms helps support proper alignment and improved on-road handling when using larger tires. Fabtech 17-4 stainless steel misalignment spacers provide appropriate clearance for the uniballs throughout the suspension’s travel range. Frame-side urethane bushings help control road noise while maintaining reliable operation in rugged conditions.\u003c\/p\u003e\n\u003cp\u003eThe Fabtech K2383 Uniball Upper Control Arm Lift Kit fits 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. Professional installation and an alignment are recommended after installation. California Proposition 65 warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits 2021-2026 Ford Bronco models\u003c\/li\u003e\n\u003cli\u003eConstruction: 1.50-inch outside-diameter 4130 chromoly tubing with a 0.120-inch wall\u003c\/li\u003e\n\u003cli\u003eUniballs: American-made 1-inch FK stainless steel PTFE-lined uniballs\u003c\/li\u003e\n\u003cli\u003ePins: Heat-treated 17-4 stainless steel pins fit factory ball joint tapers without spindle modification\u003c\/li\u003e\n\u003cli\u003eCaster: Provides additional caster compared with stock upper control arms for improved oversized-tire fitment and on-road handling\u003c\/li\u003e\n\u003cli\u003eMisalignment Spacers: 17-4 stainless steel spacers provide proper uniball clearance throughout suspension travel\u003c\/li\u003e\n\u003cli\u003eBushings: Frame-side urethane bushings help reduce road noise and support long-term durability\u003c\/li\u003e\n\u003cli\u003eUse: Designed for stock or lifted suspension systems and demanding off-road conditions\u003c\/li\u003e\n\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\n\u003cli\u003ePart Number: K2383\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2383\u003cbr\u003e\nPart Number: K2383\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771583168621,"sku":"K2383","price":1227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2383-beauty-02.jpg?v=1792224728"},{"product_id":"fabtech-k2378dl-uniball-3-inch-lift-system-with-dirt-logic-2-5-coilover-shocks-for-ford-bronco","title":"Fabtech K2378DL Uniball 3-Inch Lift System with Dirt Logic 2.5 Coilover Shocks for Ford Bronco","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade your Ford Bronco suspension with the Fabtech K2378DL Uniball Lift System with Shocks. Designed for 2021–2026 Ford Bronco models, this complete 3-inch lift kit improves suspension strength, wheel travel, and ride control for daily driving, overlanding, and weekend trail use. The system combines heavy-duty Uniball Upper Control Arms with stainless steel Dirt Logic 2.5 coilover shocks to provide a balanced, compliant ride on the street and dependable performance off-road.\u003cbr\u003eThe Fabtech Uniball Upper Control Arms are built from 1.25-inch outside-diameter chromoly tubing with .120-inch wall thickness for increased strength and long-term durability. Each arm uses a 1-inch FK stainless steel PTFE-lined Uniball that connects to the factory steering knuckle without drilling. By eliminating the factory upper ball joint, the replacement arms offer improved articulation and are engineered to work with the included Dirt Logic 2.5 coilover shocks. Cold-wound coil springs help deliver controlled suspension movement while maintaining the capability needed for demanding terrain.\u003cbr\u003eAt the rear, extended-length upper link arms accommodate increased suspension travel without binding and help maintain proper alignment with the new ride height. Matching stainless steel Dirt Logic 2.5 coilover shocks provide consistent damping and enhanced ride quality throughout the vehicle. This Fabtech suspension system is an effective choice for Bronco owners seeking increased performance without an excessively tall lift. Installation and application should be confirmed for the specific vehicle configuration before purchase. Part number K2378DL. California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2378DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Type: Uniball lift system with front and rear coilover shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Control Arms: Heavy-duty chromoly Uniball Upper Control Arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniball Construction: 1-inch FK stainless steel PTFE-lined Uniballs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Shocks: Stainless steel Dirt Logic 2.5 coilover shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoil Springs: Cold-wound springs for controlled ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Link Arms: Extended-length upper links for increased travel without binding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Benefit: Connects to the factory steering knuckle without drilling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUse: Suitable for daily driving, overlanding, and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFreight Requirement: LTL freight may be required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 3\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2378DL\u003cbr\u003e\nPart Number: K2378DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771584086125,"sku":"K2378DL","price":5203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2378dl-beauty-02.jpg?v=1792224745"},{"product_id":"fabtech-ftl5212-1-5-inch-front-leveling-kit-for-2021-2026-ford-bronco-4wd","title":"Fabtech FTL5212 1.5-Inch Front Leveling Kit for 2021-2026 Ford Bronco 4WD","description":"Leveling System\n\u003cp\u003eUpgrade the stance and tire clearance of your 2021-2026 Ford Bronco 4WD with the Fabtech FTL5212 Front Leveling Kit. This suspension leveling system uses CNC-machined aluminum front billet spacers that install on top of the factory coilover assemblies, adding front lift while preserving the Bronco’s compliant factory ride. The design helps reduce the front-end rake and provides additional clearance for oversized tires without requiring replacement coilovers or a complete suspension overhaul.\u003cbr\u003eFabtech engineers designed the FTL5212 spacers to provide the maximum practical lift height without creating ball-joint or tie-rod binding as the suspension cycles through its full range of travel. The spacers bolt in without disassembling the factory coilover shocks, helping streamline installation and minimize installation time. High-grade hardware is included for dependable installation, and the system is engineered specifically for compatible Ford Bronco 4WD applications from 2021 through 2026.\u003cbr\u003eAs part of Fabtech’s exclusive Trade Up program, this leveling kit can help provide a path toward a complete Fabtech lift system. If you later decide to upgrade, you may be able to trade in the previously purchased leveling kit toward a new Fabtech system, subject to Fabtech program terms and eligibility requirements. The Fabtech FTL5212 is a practical solution for improving front-end appearance, supporting larger tire fitment, and maintaining a smooth, controlled ride.\u003cbr\u003eThis product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.5-inch front leveling lift helps reduce factory rake and improve vehicle stance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCNC-machined aluminum billet spacers provide durable, precise construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstalls on top of the factory coilover assemblies without coilover disassembly\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineered to help prevent ball-joint and tie-rod bind through the suspension travel range\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRetains the factory coilover assemblies and compliant factory ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides additional front clearance for oversized tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes high-grade installation hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2021-2026 Ford Bronco 4WD models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEligible for Fabtech Trade Up program participation subject to program terms\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 1.5\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTL5212\u003cbr\u003e\nPart Number: FTL5212\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772318220397,"sku":"FTL5212","price":158.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/ftl5212-beauty.jpg?v=1792239339"},{"product_id":"readylift-2021-2026-ford-bronco-premium-3-5-sst-3-3-series-lift-kit-62-21360","title":"ReadyLift 2021-2026 Ford Bronco Premium 3.5\" SST 3.3 Series Lift Kit 62-21360","description":"\u003cp\u003e\u003cstrong\u003e2021-2026 Ford Bronco Premium 3.5\" SST 3.3 Series Lift Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntroducing the ReadyLIFT 2021-2026 Bronco SST 3.3 Series 3.5 Lift Kit, a collaboration between ReadyLIFT and Falcon teams, designed to elevate the Ford Bronco's off-road capabilities. This kit, the result of extensive testing, enhances both on-road performance and off-road prowess. With features like the Falcon quick adjust knob for ride flexibility and an 8-position fine-tune adjustment, it offers quick adaptability for various driving conditions. The kit includes ReadyLIFT billet upper control arms made from CNC-machined 6061 Aluminum, equipped with forged chromoly bushing rod ends and Teflon-lined dual durometer bushings. The ReadyLIFT arm also boasts a self-retaining feature with pinch bolts and a replaceable 4140 alloy nut. Additionally, it features a heavy-duty high angle ball joint with an O-ring sealed cap for added durability. The Falcon 3.3 Series Fast Adjust Coilovers and Piggyback Shocks provide exceptional off-road performance and highway control with Fast Adjust tuning technology. These shocks come with modular body caps and internal hydraulic bump stops for improved ride quality. The kit also includes adjustable heavy-duty rear lower control arms with Terrain Control Technology Flex Joints, ensuring durability and flexibility for off-roading while maintaining an OEM-like ride on the streets. The adjustable rear track bar, equipped with Terrain Control Technology Flex Joints, allows for quick on-vehicle adjustment. The Heavy Duty Track Bar Bracket corrects vehi\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReadyLIFT billet upper control arms (UCA)\u003c\/li\u003e\n\u003cli\u003eConstructed from CNCmachined 6061 Aluminum\u003c\/li\u003e\n\u003cli\u003eFalcon 3.3 Series Fast Adjust Coilovers\u003c\/li\u003e\n\u003cli\u003eAdjustable Heavy Duty Rear Lower Control Arms\u003c\/li\u003e\n\u003cli\u003eAdjustable Rear Track Bar\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Track Bar Bracket\u003c\/li\u003e\n\u003cli\u003eAllows for up to 37x12.50 tall tires when used on 17\"x8.5\" wide wheels with a +18mm offset*\u003c\/li\u003e\n\u003cli\u003eMax tire size with trimming 38\"x12.50\" on 17\"x8.5\" wide wheels with a +18mm offset*\u003c\/li\u003e\n\u003cli\u003eNot for use on Ford Bronco Sport or Raptor editions.\u003c\/li\u003e\n\u003cli\u003eConstructed from CNC Constructed from CNCmachined 6061 Aluminum\u003c\/li\u003e\n\u003cli\u003ePremium 3.5\" SST 3.3 Series Lift Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 62-21360\u003c\/li\u003e\n\u003cli\u003eControl Arm Material: Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Coil Spring\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Coilover\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3.5 Inches\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eFront Shocks: Falcon 3.3\u003c\/li\u003e\n\u003cli\u003eFront Shocks: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903163105389,"sku":"6221360","price":5499.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/62-21360-png.webp?v=1793334240"},{"product_id":"readylift-ford-bronco-2021-2026-1-26-leveling-kit-66-21100","title":"ReadyLift Ford Bronco 2021-2026 1.26'' Leveling Kit 66-21100","description":"\u003cp\u003e\u003cstrong\u003eFord Bronco 2021-2026 1.26'' Leveling Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReadyLIFT is thrilled to introduce their premium suspension lift product for the all-new Ford Bronco – the 66-21100 New Ford Bronco 1.26\" front leveling kit. This innovative kit is designed to enhance the appearance and ride quality of the Bronco, making it an ideal choice for Bronco enthusiasts. The kit includes two CNC-machined aircraft-grade billet Aluminum top mount strut extensions and two lower strut extensions, providing a perfect 1.26\" front lift for a balanced stance that adds a muscular touch to the Bronco's aesthetic. Importantly, it is compatible with or without the factory Sasquatch package lift kit. ReadyLIFT's dedicated engineers have meticulously engineered the leveling kit to ensure it achieves maximum height without causing any ball joint or tie rod bind when the suspension undergoes its full range of motion. This leveling kit not only enhances ground clearance but also transforms the Bronco's appearance into a more aggressive stance. Additionally, it grants Bronco owners the flexibility to upgrade to larger wheel and tire combinations. For those with the Sasquatch package, recommended tire sizes include 315\/70R-17, while non-Sasquatch package Broncos can accommodate 285\/70R-17 tires. With some trimming and clearance modifications, it can even accommodate a 35x12.50 tire on a 9\" wide wheel with +18 offset, though this may vary depending on the trim and package of the Bronco. The key features and benefits of this leveling kit include aircraft-grade CNC-machin\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e202123 Ford Bronco\u003c\/li\u003e\n\u003cli\u003e1.26\" Leveling Kit\u003c\/li\u003e\n\u003cli\u003eAircraftgrade CNCmachined billet Aluminum construction\u003c\/li\u003e\n\u003cli\u003eBolton installation\u003c\/li\u003e\n\u003cli\u003eNo modifications or cutting required\u003c\/li\u003e\n\u003cli\u003eAchieves maximum lift height\u003c\/li\u003e\n\u003cli\u003eDoes not create tie rod or ball joint bind during suspension cycling\u003c\/li\u003e\n\u003cli\u003eIncreases ground clearance\u003c\/li\u003e\n\u003cli\u003eAllows for 315\/70R17 tires for Bronco's with the Sasquatch package\u003c\/li\u003e\n\u003cli\u003eAllows for 285\/70R17 tires for all nonSasquatch packages\u003c\/li\u003e\n\u003cli\u003eCan accommodate up to 35x12.50 tires on a 9\" wide wheel with +18 offset\u003c\/li\u003e\n\u003cli\u003eTrimming\/clearance modifications may be necessary\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 66-21100\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 1.25 Inches\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 2 Hours\u003c\/li\u003e\n\u003cli\u003eMaterial: Billet Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903166611565,"sku":"6621100","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/2021-FORD-BRONCO-1-25-LEVELING-KIT.webp?v=1793334075"},{"product_id":"readylift-2021-2026-ford-bronco-heavy-duty-track-bar-bracket-with-a-3-to-4-lift-67-21361","title":"ReadyLift 2021-2026 Ford Bronco Heavy Duty Track Bar Bracket With A 3 '' To 4 '' Lift 67-21361","description":"\u003cp\u003e\u003cstrong\u003e2021-2026 Ford Bronco Heavy Duty Track Bar Bracket With A 3 '' To 4 '' Lift\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeavy Duty Track Bar Bracket The Rear Track Bar Axle Bracket Kit corrects vehicle roll center, restores factory handling, and reduces body roll on lifted applications. The billet clamp works in perfect concert with the highly triangulated rear bracket to create the added strength needed under extreme off-road use.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for Bronco's with 3\" to 4\" lift\u003c\/li\u003e\n\u003cli\u003eCorrects vehicle roll center\u003c\/li\u003e\n\u003cli\u003eRestores factory handling\u003c\/li\u003e\n\u003cli\u003eReduces body roll on lifted applications\u003c\/li\u003e\n\u003cli\u003eBillet clamp for added strength\u003c\/li\u003e\n\u003cli\u003eHighly triangulated rear bracket\u003c\/li\u003e\n\u003cli\u003ePerfect for extreme offroad use\u003c\/li\u003e\n\u003cli\u003ePerfect for extreme off Perfect for extreme offroad use\"\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Track Bar Bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 67-21361\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903172345965,"sku":"6721361","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/67-21361-png.webp?v=1793334139"},{"product_id":"readylift-2021-2026-ford-bronco-2-sst-lift-kit-base-kit-69-21200","title":"ReadyLift 2021-2026 Ford Bronco 2\" SST Lift Kit - Base Kit 69-21200","description":"\u003cp\u003e\u003cstrong\u003e2021-2026 Ford Bronco 2\" SST Lift Kit - Base Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReadyLIFT is excited to announce the industry's best 2\" Lift Kit for the all-new Ford Bronco! The new Bronco is the most popular multi-purpose vehicle introduced in over a decade and ReadyLIFT has been busy developing exciting new suspension systems that improve the overall look and ride quality of the Bronco. The 69-21200 2\" SST Lift Kit for the new Ford Bronco featuring billet spacers. Billet spacers are designed to achieve the maximum height without creating a ball joint or tie rod bind when the suspension is cycling throughout the entire range of travel. ReadyLIFT's Leveling Kit features an easy, 100% bolt-on installation process giving your 2021-2026 Ford Bronco an improved, aggressive stance. lifting your vehicle to give you increased ground clearance to run larger tires while eliminating the nose-down factory look. Helps give your vehicle a more aggressive stance over the factory sasquatch equipped vehicles, leaving others wanting more. Each kit features front and rear billet Aluminum strut spacers to resist the elements, CNC machined for a precise fit. Recommended tire sizes include 305\/70R17 on 17 x 8.5 +18 offset. The maximum tire with trimming is 35\" x 12.5\" and wheel size of 9\" wide and 0 offset. Key Features \u0026amp; Benefits: CNC Machined Aircraft-grade 6061 T6 Billet Aluminum Front and Rear Spacers High-Grade hardware to accompany the quality components Factory ride and handling 100% bolt-on * (2\" SST Kit does NOT fit Sasquatch Package equipped vehicles, Badlands, Wil\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2\" lift kit specifically designed for the allnew Ford Bronco\u003c\/li\u003e\n\u003cli\u003eCompatible with nonsasquatch or factory lifted Broncos\u003c\/li\u003e\n\u003cli\u003eMade from CNCmachined aircraftgrade billet Aluminum\u003c\/li\u003e\n\u003cli\u003eFeatures top mount spacers for added durability\u003c\/li\u003e\n\u003cli\u003eEasy bolton installation with no modifications required\u003c\/li\u003e\n\u003cli\u003eNot suitable for use on Sasquatch Package equipped vehicles (Badlands, Wildtrak, First Edition, and Wildtrack with Hoss 3.0 Fox shocks)\u003c\/li\u003e\n\u003cli\u003e2\"\" lift kit specifically designed for the all 2\"\" lift kit specifically designed for the allnew Ford Bronco\u003c\/li\u003e\n\u003cli\u003eCompatible with non Compatible with nonsasquatch or factory lifted Broncos\u003c\/li\u003e\n\u003cli\u003eMade from CNC Made from CNCmachined aircraftgrade billet Aluminum\u003c\/li\u003e\n\u003cli\u003eEasy bolt Easy bolton installation with no modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 69-21200\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2 Inches\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 35 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 Inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903175622765,"sku":"6921200","price":269.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/RL-3-SST-LIFT-KIT-2018-FORD-EXPED-CCD.webp?v=1793333963"},{"product_id":"readylift-2021-2026-ford-bronco-2-f-2-1-2-r-sst-lift-for-high-payload-conditions-69-21210","title":"ReadyLift 2021-2026 Ford Bronco 2'' F 2 1\/2'' R SST Lift For High Payload Conditions 69-21210","description":"\u003cp\u003e\u003cstrong\u003e2021-2026 Ford Bronco 2'' F 2 1\/2'' R SST Lift For High Payload Conditions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you're a new Ford Bronco owner planning to equip your vehicle for overland or rock crawling adventures, ReadyLIFT has you covered. Our 69-21210 Ford Bronco High Payload 2\" SST lift kit is specifically engineered for Bronco enthusiasts who add heavy aftermarket products like rooftop tents, tools, refrigerators, and more. This kit builds upon our standard Ford Bronco SST lift kit by providing additional rear lift height to accommodate added cargo weight. Designed for new Ford Bronco vehicles without the Sasquatch package (including Badlands, Wildtrak, and First Edition models), this kit is ideal for Broncos used regularly with cargo management systems, rooftop equipment, steel bumpers, overlanding gear, and oversized spare tires. The 69-21210 SST lift kit offers approximately 2.5\" of rear lift when the vehicle is lightly loaded. The kit utilizes CNC-machined aircraft-grade 6061-T6 billet Aluminum front and rear top mount spacers to deliver 2\" of lift. These premium-grade spacers are designed to maintain the factory ride and handling while avoiding common issues like ball joint or tie rod bind that inferior kits may cause. Our engineering team has fine-tuned the geometry to ensure flawless suspension performance throughout the entire range of travel. Installation is a breeze with this completely bolt-on kit, requiring no modifications or cutting. It not only enhances your vehicle's stance but also includes additional rake to accommodate heavier cargo. With 2 inches of front l\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh payload capacity\u003c\/li\u003e\n\u003cli\u003eExcludes Sasquatch packages (Badlands, Wildtrak, First Edition models)\u003c\/li\u003e\n\u003cli\u003eHeavyduty CNCmachined aircraft grade billet Aluminum construction\u003c\/li\u003e\n\u003cli\u003eReadyLIFT top mount strut extensions require no cutting or modifications to install\u003c\/li\u003e\n\u003cli\u003eProvides 2\" of lift for a true lifted stance\u003c\/li\u003e\n\u003cli\u003eMaintains factory ride and handling\u003c\/li\u003e\n\u003cli\u003eIncreases ground clearance\u003c\/li\u003e\n\u003cli\u003eAllows for larger wheels and tires\u003c\/li\u003e\n\u003cli\u003eEngineered to compensate for heavy cargo weight (rooftop tents, tools, camping gear, etc.)\u003c\/li\u003e\n\u003cli\u003eNot for use on Sasquatch Package equipped vehicles (Badlands, Wildtrak, First Edition, and Wildtrack with Hoss 3.0 Fox Shocks)\u003c\/li\u003e\n\u003cli\u003eHeavy Heavyduty CNCmachined aircraft grade billet Aluminum construction\u003c\/li\u003e\n\u003cli\u003e\"Premium\" SST lift kit solution for new Ford Bronco\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 69-21210\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2.5 Inches\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2 Inches\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 35 Inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903175688301,"sku":"6921210","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/RL-3-5-FRONT-KEY-WAY-2-0-REAR-FALCON.webp?v=1793333964"},{"product_id":"readylift-2021-2026-ford-bronco-3-sst-lift-kit-sasquatch-package-equipped-69-21300","title":"ReadyLift 2021-2026 Ford Bronco 3\" SST Lift Kit - Sasquatch Package-equipped 69-21300","description":"\u003cp\u003e\u003cstrong\u003e2021-2026 Ford Bronco 3\" SST Lift Kit - Sasquatch Package-equipped\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReadyLIFT is excited to announce our highly anticipated 3'' SST Lift Kits for the 2021-UP Ford Bronco (69-21400 4\" SST Lift Kit for standard suspension Bronco \u0026amp; 69-21300 3\" SST Lift Kit for Sasquatch suspension equipped Bronco's). These kits feature an easy, 100% bolt-on installation process giving the 2021-UP Ford Bronco an improved, aggressive stance by lifting the vehicle and increasing ground clearance to run larger tires. The kit offers a slight front-to-rear rake to allow for the addition of a larger spare tire and other accessories. ReadyLIFT's 6061-T6 billet Aluminum front spacers are designed to achieve the maximum lift height while avoiding a ball joint or tie rod bind when the suspension articulates throughout the entire range of travel on and off-road. The addition of the high-strength 4130 alloy steel preload spacer aids in the packaging of the larger-diameter tires. The kits feature two front billet Aluminum strut spacers CNC-machined for a precise fit, two high-strength steel offset rear spacers powder coated to resist the elements, and a .260\" steel heavy-duty rear track bar bracket to achieve proper suspension geometry when lifted. The all-new SST Lift Kit tubular upper control arms feature optimum ball joint pivot angles as well as corrected ball joint placement to address caster\/camber changes. Upper control arms also include the all-new aircraft-grade Aluminum sealed cap to keep debris out of the ball joint cup. This Bronco lift kit is an affordable suspen\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSST Lift Kit for Sasquatch Packageequipped vehicles\u003c\/li\u003e\n\u003cli\u003eTubular upper control arms\u003c\/li\u003e\n\u003cli\u003eOptimum ball joint pivot angles\u003c\/li\u003e\n\u003cli\u003eCorrected ball joint placement for caster\/camber changes\u003c\/li\u003e\n\u003cli\u003eAircraftgrade Aluminum sealed cap\u003c\/li\u003e\n\u003cli\u003eKeeps debris out of ball joint cup\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for Badlands, Wildtrak, First Edition, and Wildtrack models\u003c\/li\u003e\n\u003cli\u003eNot compatible with Bronco Sport or vehicles with Hoss 3.0 Fox shocks\u003c\/li\u003e\n\u003cli\u003eSST Lift Kit for Sasquatch Package SST Lift Kit for Sasquatch Packageequipped vehicles\u003c\/li\u003e\n\u003cli\u003eAircraft Aircraftgrade Aluminum sealed cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 69-21300\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Spacer\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3 Inches\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 38 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 3 Inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903175721069,"sku":"6921300","price":454.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/69-21300-png.webp?v=1793334037"},{"product_id":"readylift-3-sst-lift-w-upper-control-arms-and-high-angle-ball-joints-69-21310-for-2021-2025-ford-bronco-69-21310","title":"ReadyLift 3'' SST Lift w\/ Upper Control Arms and High-Angle Ball Joints 69-21310 for 2021-2026 Ford Bronco","description":"\u003cp\u003e\u003cstrong\u003e3'' SST Lift w\/ Upper Control Arms and High-Angle Ball Joints (Designed exclusively for Sasquatch Package-equipped vehicles including Badlands, Wildtrak, and First Edition.)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGet ready to take your Ford Bronco to the next level—literally. ReadyLIFT is thrilled to introduce two brand-new SST Lift Kits, designed to deliver enhanced performance, durability, and an aggressive stance for your 2021+ Ford Bronco. Now featuring our exclusive Heavy-Duty High-Angle Ball Joints pre-installed in the upper control arms, these kits offer superior strength, improved wheel travel, and uncompromised ride quality. No more modifying stock ball joints—just bolt on and go! Both kits deliver a seamless, 100% bolt-on installation while increasing ground clearance for larger tires and a bold, off-road-ready look. A slight front-to-rear rake allows for bigger spare tires and extra accessories without sacrificing visual balance. Dominate the Trails with Confidence The all-new tubular upper control arms not only optimize ball joint angles but also feature a sealed aircraft-grade Aluminum cap to protect against dirt and debris. Designed for enthusiasts who demand strength and reliability, this lift kit allows you to run up to 37” tires for ultimate off-road capability. Key Features \u0026amp; Benefits • 100% bolt-on installation – no cutting or modifications required • Supports up to 37”x12.50” tires on 17”x8.5” wheels (+18mm offset) • Max tire size with trimming: 38”x12.50” on 17”x8.5” wheels (+18mm offset) • High-performance tubular upper control arms with advanced ball joints for improved articulation Upgrade your Bronco today with ReadyLIFT’s industry-leading su\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt for Strength, Engineered for Adventure, 6061-T6 Billet Aluminum Front Spacers – Maximum lift without ball joint or tie rod bind, 4130 Alloy Steel Preload Spacer – Enhances clearance for oversized tires,\u003c\/li\u003e\n\u003cli\u003ePrecision CNC-Machined Components – Ensures perfect fitment and long-lasting durability,\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Rear Track Bar Bracket (.260” Steel) – Corrects suspension geometry for a smooth ride,\u003c\/li\u003e\n\u003cli\u003e*Designed exclusively for Sasquatch Package-equipped vehicles including Badlands, Wildtrak, First Edition, and Wildtrack.\u003c\/li\u003e\n\u003cli\u003eNot for use on Bronco Sport or vehicles equipped with Hoss 3.0 Fox shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 69-21310\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 37 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 Inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903175786605,"sku":"6921310","price":1049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/69-21310-jpg.webp?v=1793334038"},{"product_id":"readylift-4-sst-lift-w-upper-control-arms-and-high-angle-ball-joints-69-21410-for-2021-2025-ford-bronco-69-21410","title":"ReadyLift 4'' SST Lift w\/ Upper Control Arms and High-Angle Ball Joints 69-21410 for 2021-2026 Ford Bronco","description":"\u003cp\u003e\u003cstrong\u003e4'' SST Lift w\/ Upper Control Arms and High-Angle Ball Joints (Does NOT fit Sasquatch Package equipped vehicles, Badlands, Wildtraks, First Edition or Bronco Sport)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGet ready to take your Ford Bronco to the next level—literally. ReadyLIFT is thrilled to introduce two brand-new SST Lift Kits, designed to deliver enhanced performance, durability, and an aggressive stance for your 2021+ Ford Bronco. Now featuring our exclusive Heavy-Duty High-Angle Ball Joints pre-installed in the upper control arms, these kits offer superior strength, improved wheel travel, and uncompromised ride quality. No more modifying stock ball joints—just bolt on and go! Dominate the Trails with Confidence The all-new tubular upper control arms not only optimize ball joint angles but also feature a sealed aircraft-grade Aluminum cap to protect against dirt and debris. Designed for enthusiasts who demand strength and reliability, this lift kit allows you to run up to 37” tires for ultimate off-road capability. Key Features \u0026amp; Benefits • 100% bolt-on installation – no cutting or modifications required\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt for Strength, Engineered for Adventure, 6061-T6 Billet Aluminum Front Spacers – Maximum lift without ball joint or tie rod bind, 4130 Alloy Steel Preload Spacer – Enhances clearance for oversized tires,\u003c\/li\u003e\n\u003cli\u003ePrecision CNC-Machined Components – Ensures perfect fitment and long-lasting durability, Heavy-Duty Rear Track Bar Bracket (.260” Steel) – Corrects suspension geometry for a smooth ride,\u003c\/li\u003e\n\u003cli\u003e*Not for use on Sasquatch Package-equipped vehicles, Badland, and Wildtrack equipped with Hoss 3.0 Fox shocks. Not for use on Bronco Sport.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 69-21410\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 37 Inch\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring Spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2 Inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903176409197,"sku":"6921410","price":1049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/69-21410-jpg.webp?v=1793334042"}],"url":"https:\/\/truckarmy.com\/collections\/2025-ford-bronco-lift-leveling-kits.oembed","provider":"Truck Army","version":"1.0","type":"link"}