{"title":"Chevy Colorado Shocks","description":"\u003cp\u003eNew shocks are the quickest way to tighten up a tired ride on your Chevy Colorado, and a must after a lift.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift height:\u003c\/strong\u003e shocks are sold for stock height or a lift range, so match yours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear\u003c\/strong\u003e are different parts and most are sold individually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrivetrain and trim:\u003c\/strong\u003e 2WD, 4WD and off-road trims can take different shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelect your truck in the vehicle bar above to see only parts that fit.\u003c\/p\u003e","products":[{"product_id":"bilstein-b8-5160-remote-reservoir-shock-absorber-25-336689","title":"Bilstein B8 5160 Remote Reservoir Shock Absorber 25-336689","description":"B8 5160 - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein B8 5160 remote reservoir shock absorber, part number 25-336689, is engineered as a direct-fit suspension upgrade for lifted light trucks and SUVs. Designed for demanding off-road use, this shock combines a remote reservoir with Bilstein’s proven monotube construction to increase cooling capacity, support greater wheel travel, and maintain consistent damping performance during extended driving. The application-specific velocity-sensitive digressive valving helps provide responsive control on changing terrain while supporting a confident ride on and off the road.\u003cbr\u003eA 46mm monotube piston delivers consistent, fade-resistant performance across a wide range of conditions. The shock features non-adjustable damping, a zinc-plated finish, a smooth non-coilover body, and a 14mm shaft. Its 360-degree swivel banjo hose fitting helps simplify routing and supports a clean installation, while the included billet reservoir clamp secures the remote reservoir where applicable. Black bellows provide additional protection for the shock assembly in harsh environments.\u003cbr\u003eThe Bilstein B8 5160 is designed for direct fitment on the front suspension of select Chevrolet Colorado and GMC Canyon models. It uses 14.1mm eye-style upper and lower mounts and provides a 9.64-inch stroke between a 15.25-inch collapsed length and a 24.89-inch extended length. The shock is not a coilover and does not include a spring seat. Verify vehicle configuration and suspension lift requirements before ordering to ensure proper fitment. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5160 remote reservoir shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 25-336689\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension upgrade for select lifted Chevrolet Colorado and GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube construction for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Remote reservoir for increased cooling capacity and wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Velocity-sensitive digressive valving with non-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: 14.1mm eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 9.64 inches of stroke\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtection: Black bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHardware: Billet reservoir clamp included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nSeries: B8 5160\u003cbr\u003e\nCollapsed Length (In): 15.25\u003cbr\u003e\nBillet Reservoir Clamp Included: Yes\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 24.89\u003cbr\u003e\nStroke\/Travel Length (In): 9.64\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (Mm): 387.3\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nStroke\/Travel Length (Mm): 244.9\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (Mm): 632.0\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL25-336689\u003cbr\u003e\nPart Number: 25-336689\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771384135789,"sku":"25336689","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-336689_2.jpg?v=1792221500"},{"product_id":"bilstein-b6-4600-monotube-suspension-shock-absorber-24-336659-for-2023-2026-chevrolet-colorado","title":"Bilstein B6 4600 Monotube Suspension Shock Absorber 24-336659 for 2023-2026 Chevrolet Colorado","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck with the Bilstein B6 4600 suspension shock absorber, part number 24-336659. Designed as a direct-fit replacement for original equipment shock absorbers, this application-specific unit is engineered for the 2023, 2024, 2025, and 2026 Chevrolet Colorado. The B6 4600 series provides improved ride quality, handling, and comfort without requiring vehicle modifications or a lift kit.\u003cbr\u003eThe 46mm monotube design helps deliver consistent, fade-free performance across changing driving conditions by maintaining reliable damping control. A velocity-sensitive, digressive piston responds quickly to road variations, helping the shock absorber control suspension movement over uneven pavement, rough trails, and everyday driving surfaces. Bilstein tunes each B6 4600 shock absorber for its specific vehicle application to help provide balanced performance and predictable handling.\u003cbr\u003eThis Bilstein shock absorber features non-adjustable damping, a yellow-painted finish, and a blue straight protective boot. It uses an eye-style upper mount with a 14.1mm opening and an eye-style lower mount with a 14.1mm opening. The unit does not include a spring seat or external reservoir and is intended for light-truck applications. Its extended length is 23.70 inches, while its collapsed length is 15.03 inches. Professional installation is recommended, and fitment should be verified before purchase. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height 2023-2026 Chevrolet Colorado models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B6 4600 series shock absorber, part number 24-336659\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning supports improved ride quality and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping for straightforward installation and operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper and lower eye mounts with 14.1mm openings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eYellow-painted finish with blue straight protective boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length: 23.70 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length: 15.03 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo spring seat or external reservoir included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSegment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nExtended Length (Mm): 602.0\u003cbr\u003e\nCollapsed Length (In): 15.03\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nCollapsed Length (Mm): 381.8\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 23.70\u003cbr\u003e\nBoot Included: Blue Straight\u003cbr\u003e\nAaiaid Part Number: BBGL24-336659\u003cbr\u003e\nPart Number: 24-336659\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771404189805,"sku":"24336659","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-336659_1.jpg?v=1792222646"},{"product_id":"bilstein-b6-4600-front-suspension-shock-absorber-24-336536-for-chevrolet-colorado","title":"Bilstein B6 4600 Front Suspension Shock Absorber 24-336536 for Chevrolet Colorado","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck with the Bilstein B6 4600 suspension shock absorber, part number 24-336536. Designed as a direct-fit replacement and performance upgrade for original equipment shock absorbers, this Bilstein shock helps improve ride quality, handling, and comfort without requiring extensive modifications. It is engineered for compatible 2023–2026 Chevrolet Colorado applications and is tuned specifically for the vehicle platform to deliver balanced performance on the street and over changing road surfaces.\u003cbr\u003eThe B6 4600 uses a 46mm monotube design to provide consistent, fade-resistant damping in demanding driving conditions. Its velocity-sensitive, digressive piston responds quickly to changes in road input, helping maintain tire contact and vehicle control while reducing excessive body motion. The non-adjustable damping calibration is application-specific, offering dependable performance without manual setup or adjustment. A smooth-body construction, yellow painted finish, and durable design make this shock absorber suitable for light-truck use.\u003cbr\u003eInstallation features a stem-style upper mount and crossbar lower mount for direct-fit compatibility. The shock includes a spring seat and is designed without an external reservoir or protective boot. With a 20.51-inch extended length, 15.96-inch collapsed length, and 4.55-inch travel, the Bilstein B6 4600 provides reliable suspension control for stock-height Chevrolet Colorado models. Please verify vehicle fitment and suspension configuration before ordering. This product contains a California Proposition 65 warning regarding cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit performance upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B6 4600 series shock absorber, part number 24-336536\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning for compatible 2023–2026 Chevrolet Colorado models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping calibrated for dependable everyday performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body construction with durable yellow painted finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStem-style upper mount and crossbar lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e20.51-inch extended length and 15.96-inch collapsed length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e4.55 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir and no boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nCollapsed Length (Mm): 405.5\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 115.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 521.0\u003cbr\u003e\nCollapsed Length (In): 15.96\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 20.51\u003cbr\u003e\nStroke\/Travel Length (In): 4.55\u003cbr\u003e\nAaiaid Part Number: BBGL24-336536\u003cbr\u003e\nPart Number: 24-336536\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771404288109,"sku":"24336536","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_62bb1c52-2538-40ac-be3a-f2950ddb4dbf.jpg?v=1792222663"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-24-336529-for-chevrolet-colorado","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 24-336529 for Chevrolet Colorado","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck’s suspension with the Bilstein B8 5100 suspension shock absorber, part number 24-336529. Designed as a direct-fit replacement for lifted trucks and SUVs, this shock absorber is specifically tuned for select Chevrolet Colorado applications from 2023 through 2026. Its performance-focused design helps improve ride quality, handling, control, and comfort on both paved roads and demanding terrain.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube construction that provides consistent, fade-resistant performance under changing driving conditions. A velocity-sensitive, digressive piston responds quickly to road irregularities while maintaining controlled damping during cornering, braking, and off-road driving. The shock absorber features a smooth body design, zinc-plated finish, black bellows boot, and non-adjustable damping for reliable, application-specific performance without the need for manual adjustments.\u003cbr\u003eThis Bilstein shock absorber has an eye-style upper mount and an eye-style lower mount with a 14.1mm lower mounting specification. It provides 8.85 inches of suspension travel, with a collapsed length of 15.24 inches and an extended length of 24.09 inches. The unit includes no reservoir, coilover spring seat, or adjustable damping mechanism, making it a straightforward replacement for compatible suspension setups. Verify vehicle application and axle position before installation.\u003cbr\u003eFeatures: Bilstein B8 5100 series suspension shock absorber\u003cbr\u003eFeatures: Direct-fit design for compatible 2023-2026 Chevrolet Colorado models\u003cbr\u003eFeatures: 46mm monotube construction for consistent, fade-resistant performance\u003cbr\u003eFeatures: Velocity-sensitive digressive piston for responsive damping control\u003cbr\u003eFeatures: Smooth body, zinc-plated finish with black bellows boot\u003cbr\u003eFeatures: Eye-style upper and lower mounts\u003cbr\u003eFeatures: 8.85 inches of stroke or travel\u003cbr\u003eFeatures: Non-adjustable damping with no external reservoir\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design for compatible 2023-2026 Chevrolet Colorado models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube construction for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston for responsive damping control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth body, zinc-plated finish with black bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.85 inches of stroke or travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 8.85\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nCollapsed Length (Mm): 387.3\u003cbr\u003e\nStroke\/Travel Length (Mm): 224.8\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 612.0\u003cbr\u003e\nCollapsed Length (In): 15.24\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 24.09\u003cbr\u003e\nAaiaid Part Number: BBGL24-336529\u003cbr\u003e\nPart Number: 24-336529\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771404484717,"sku":"24336529","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_e98227ba-fe2a-4718-9d97-236738c565ad.jpg?v=1792222686"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-336345-for-chevrolet-colorado","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-336345 for Chevrolet Colorado","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your truck with the Bilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-336345. Designed for front OE coilover-style suspension systems, this shock absorber provides improved handling, increased wheel travel, and dependable control for demanding street and off-road driving. It fits 2023–2026 Chevrolet Colorado models and offers a practical way to help level the vehicle when used with compatible OE springs.\u003cbr\u003eThe B8 5100 features multiple snap-ring grooves that allow the spring seat position to be adjusted for up to 3 inches of front lift, depending on the vehicle application. Its 46mm monotube design uses a digressive piston and self-adjusting deflective-disc valving to provide consistent damping and fade-free performance across changing road conditions. The non-adjustable damping calibration is engineered to deliver predictable suspension control without requiring manual tuning.\u003cbr\u003eBuilt for light-truck use, this Bilstein shock absorber has a smooth-body design, zinc-plated finish, crossbar lower mount, and stem upper mount. The included spring seat supports the ride-height adjustment feature, while the absence of a reservoir and protective boot keeps the configuration straightforward for installation. With an extended length of 20.91 inches, a collapsed length of 15.96 inches, and 4.95 inches of travel, the shock absorber is designed to support increased suspension movement while maintaining controlled response. Professional installation is recommended, and fitment should be verified before ordering. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2023–2026 Chevrolet Colorado models with compatible front OE coilover-style suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 Ride Height Adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-336345\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height Adjustment: Multiple snap-ring grooves provide up to 3 inches of front lift with OE springs, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: 46mm monotube shock absorber with digressive piston and self-adjusting deflective-disc valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Delivers consistent, fade-free damping, increased wheel travel, and improved handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Crossbar lower mount and stem upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 4.95 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 20.91 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 15.96 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 405.5\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 125.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 531.0\u003cbr\u003e\nCollapsed Length (In): 15.96\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 20.91\u003cbr\u003e\nStroke\/Travel Length (In): 4.95\u003cbr\u003e\nAaiaid Part Number: BBGL24-336345\u003cbr\u003e\nPart Number: 24-336345\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771404681325,"sku":"24336345","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_916a8744-4d06-49c6-9702-f331744cb0c3.jpg?v=1792222708"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-24-265874","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 24-265874","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein B8 5100 suspension shock absorber is engineered as a direct-fit upgrade for lifted light trucks and SUVs. Part number 24-265874 delivers improved ride quality, handling, and comfort for select Chevrolet Colorado and GMC Canyon applications from 2015 through 2019. Its application-specific tuning helps provide balanced control across changing road and driving conditions.\u003cbr\u003eThe B8 5100 uses a monotube internal design with a patented digressive piston that responds immediately to variations in the road surface. This velocity-sensitive valving helps maintain consistent damping and fade-free performance during demanding driving, uneven terrain, and repeated suspension movement. The non-adjustable design is calibrated for the intended vehicle application, making installation straightforward without manual damping adjustments.\u003cbr\u003eFeature: Monotube shock absorber design for consistent, fade-free performance. Feature: Patented digressive valving reacts quickly to changing surface conditions. Feature: Direct-fit configuration for compatible lifted trucks and SUVs. Feature: Smooth-body, non-coilover construction with a zinc-plated finish. Feature: Eye-style upper and lower mounts with 14.4 mm mounting points. Feature: Black bellows boot included for added shaft protection. Feature: Non-adjustable damping with no reservoir or spring seat included. Feature: 14 mm shaft and 46 mm piston diameter. Feature: 8.43 inches of suspension travel, with a 14.80-inch collapsed length and 23.24-inch extended length.\u003cbr\u003eThis Bilstein B8 5100 shock absorber fits select 2015–2019 Chevrolet Colorado and GMC Canyon models. Verify vehicle configuration, suspension lift, mounting style, and application details before ordering. This product carries a California Proposition 65 warning regarding cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMonotube design provides consistent, fade-free damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePatented digressive valving responds rapidly to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning improves ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit replacement for compatible lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction with zinc-plated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts with 14.4 mm mounting points\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no reservoir or spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14 mm shaft and 46 mm piston diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.43 inches of stroke with a 14.80-inch collapsed length and 23.24-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.4mm\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 214.1\u003cbr\u003e\nUpper Mount Type: Eye 14.4mm\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nCollapsed Length (In): 14.80\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (Mm): 590.2\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nExtended Length (In): 23.24\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 8.43\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nCollapsed Length (Mm): 376.0\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAaiaid Part Number: BBGL24-265874\u003cbr\u003e\nPart Number: 24-265874\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2015\u003cbr\u003e\nChevrolet Colorado  2016\u003cbr\u003e\nChevrolet Colorado  2017\u003cbr\u003e\nChevrolet Colorado  2018\u003cbr\u003e\nChevrolet Colorado  2019\u003cbr\u003e\nChevrolet Colorado  2020\u003cbr\u003e\nChevrolet Colorado  2021\u003cbr\u003e\nChevrolet Colorado  2022\u003cbr\u003e\nGMC Canyon  2015\u003cbr\u003e\nGMC Canyon  2016\u003cbr\u003e\nGMC Canyon  2017\u003cbr\u003e\nGMC Canyon  2018\u003cbr\u003e\nGMC Canyon  2019\u003cbr\u003e\nGMC Canyon  2020\u003cbr\u003e\nGMC Canyon  2021\u003cbr\u003e\nGMC Canyon  2022","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771545780333,"sku":"24265874","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-265874_1.jpg?v=1792223810"},{"product_id":"bilstein-b6-4600-monotube-suspension-shock-absorber-24-261630-for-chevy-colorado-and-gmc-canyon","title":"Bilstein B6 4600 Monotube Suspension Shock Absorber 24-261630 for Chevy Colorado and GMC Canyon","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck or SUV with the Bilstein B6 4600 shock absorber, part number 24-261630. Designed as a direct-fit replacement for the original equipment shock absorber, this application-specific unit is tuned to deliver improved ride quality, handling, and comfort without requiring vehicle modifications. It fits select 2015–2019 Chevrolet Colorado and GMC Canyon models; verify vehicle application before ordering.\u003cbr\u003eThe Bilstein B6 4600 uses a durable monotube design and a 46 mm piston to provide consistent, fade-resistant damping during daily driving, towing, hauling, and changing road conditions. Its velocity-sensitive digressive piston responds quickly to suspension movement, helping maintain tire contact and stable control over uneven pavement. The smooth-body, non-coilover construction is finished in Bilstein’s signature yellow paint and includes a blue straight boot for added shaft protection.\u003cbr\u003eThis non-adjustable shock absorber features eye-style upper and lower mounts with 14.4 mm mounting specifications. It has a 14 mm shaft, no reservoir, and no spring seat, making it a straightforward choice for stock-height applications requiring dependable OE-level fitment with enhanced damping performance. The shock has a collapsed length of 14.41 inches and an extended length of 22.45 inches. Professional installation is recommended, and suspension components should be replaced in axle pairs when appropriate. Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B6 4600 series shock absorber, part number 24-261630\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube design delivers consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning improves ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46 mm piston and 14 mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts with 14.4 mm mounting specifications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eYellow painted finish with blue straight protective boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2015–2019 Chevrolet Colorado and GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nCollapsed Length (In): 14.41\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nBoot Included: Blue Straight\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nCollapsed Length (Mm): 366.0\u003cbr\u003e\nLower Mount Type: Eye 14.4mm\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nUpper Mount Type: Eye 14.4mm\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nExtended Length (Mm): 570.2\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 22.45\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAaiaid Part Number: BBGL24-261630\u003cbr\u003e\nPart Number: 24-261630\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2015\u003cbr\u003e\nChevrolet Colorado  2016\u003cbr\u003e\nChevrolet Colorado  2017\u003cbr\u003e\nChevrolet Colorado  2018\u003cbr\u003e\nChevrolet Colorado  2019\u003cbr\u003e\nChevrolet Colorado  2020\u003cbr\u003e\nChevrolet Colorado  2021\u003cbr\u003e\nChevrolet Colorado  2022\u003cbr\u003e\nGMC Canyon  2015\u003cbr\u003e\nGMC Canyon  2016\u003cbr\u003e\nGMC Canyon  2017\u003cbr\u003e\nGMC Canyon  2018\u003cbr\u003e\nGMC Canyon  2019\u003cbr\u003e\nGMC Canyon  2020\u003cbr\u003e\nGMC Canyon  2021\u003cbr\u003e\nGMC Canyon  2022","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771546796141,"sku":"24261630","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-261630_1.jpg?v=1792223843"},{"product_id":"zone-offroad-nitro-smooth-body-shock-absorber-zon7757","title":"Zone Offroad Nitro Smooth Body Shock Absorber ZON7757","description":"Zone Nitro Smooth Body Shock\n\u003cp\u003eUpgrade suspension control with the Zone Offroad Nitro Smooth Body Shock Absorber, part number ZON7757. Designed for stock-like handling and dependable performance, this vehicle-specific shock uses fully displaced valving to improve compression and extension travel. A 50-psi nitrogen charge helps provide rapid response while reducing aeration during demanding on-road or off-road driving. The special Fluon-banded piston supports consistent operation and long-term durability.\u003cbr\u003eThe ZON7757 features a twin-tube steel body and 10-stage velocity-sensitive valving for balanced performance across changing terrain and driving conditions. Its non-tunable design offers a straightforward installation, with no metal cutting required. This shock absorber is sold individually and includes the necessary bushings and sleeves. It is compatible with vehicles using any lift height and uses EB1 mounting points at both the upper and lower ends.\u003cbr\u003eThis Zone Offroad Nitro shock fits select 2012 and 2013 Ram 1500 models, as well as 2012 and 2013 Chevrolet Silverado 2500 HD, Chevrolet Silverado 3500 HD, GMC Sierra 2500 HD, and GMC Sierra 3500 HD applications. Verify vehicle configuration and suspension placement before ordering to ensure proper fitment. Installation difficulty is rated 1 out of 5, with an estimated installation time of approximately 30 minutes. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Zone Offroad\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: ZON7757\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Nitro\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Twin-tube, nitrogen-charged shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving: 10-stage velocity-sensitive valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNitrogen Charge: Pressurized with 50 psi nitrogen gas to reduce aeration and improve response\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: Fluon-banded piston for consistent operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Steel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Compatibility: Designed for use with any lift height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: EB1 upper and lower mount types\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTunable: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: No metal cutting required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eContents: Sold individually with bushings and sleeves\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Difficulty: 1 out of 5\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEstimated Installation Time: Approximately 30 minutes\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nMaterial: Steel\u003cbr\u003e\nFor Use With Lift Heights: Any\u003cbr\u003e\nSeries: Nitro\u003cbr\u003e\nInstallation Difficulty: 1 out of 5\u003cbr\u003e\nInstallation Time: 0.5\u003cbr\u003e\nShock Compressed Length: 16.55\u003cbr\u003e\nShock Extended Length: 27.91\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nTechnology: Twin Tube\u003cbr\u003e\nTunable: No\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: EB1\u003cbr\u003e\nUpper Mount Type: EB1\u003cbr\u003e\nBody Diameter: 2-3\/8\"\u003cbr\u003e\nAaiaid Part Number: FQMSZON7757\u003cbr\u003e\nPart Number: ZON7757\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2015\u003cbr\u003e\nChevrolet Colorado  2016\u003cbr\u003e\nChevrolet Colorado  2017\u003cbr\u003e\nChevrolet Colorado  2018\u003cbr\u003e\nChevrolet Colorado  2019\u003cbr\u003e\nChevrolet Silverado 1500 HD  2001\u003cbr\u003e\nChevrolet Silverado 1500 HD  2002\u003cbr\u003e\nChevrolet Silverado 1500 HD  2003\u003cbr\u003e\nChevrolet Silverado 1500 HD  2005\u003cbr\u003e\nChevrolet Silverado 1500 HD  2006\u003cbr\u003e\nChevrolet Silverado 2500  2001\u003cbr\u003e\nChevrolet Silverado 2500  2002\u003cbr\u003e\nChevrolet Silverado 2500  2003\u003cbr\u003e\nChevrolet Silverado 2500  2004\u003cbr\u003e\nChevrolet Silverado 2500 HD  2001\u003cbr\u003e\nChevrolet Silverado 2500 HD  2002\u003cbr\u003e\nChevrolet Silverado 2500 HD  2003\u003cbr\u003e\nChevrolet Silverado 2500 HD  2004\u003cbr\u003e\nChevrolet Silverado 2500 HD  2005\u003cbr\u003e\nChevrolet Silverado 2500 HD  2006\u003cbr\u003e\nChevrolet Silverado 2500 HD  2007\u003cbr\u003e\nChevrolet Silverado 2500 HD  2008\u003cbr\u003e\nChevrolet Silverado 2500 HD  2009\u003cbr\u003e\nChevrolet Silverado 2500 HD  2010\u003cbr\u003e\nChevrolet Silverado 2500 HD  2011\u003cbr\u003e\nChevrolet Silverado 2500 HD  2012\u003cbr\u003e\nChevrolet Silverado 2500 HD  2013\u003cbr\u003e\nChevrolet Silverado 2500 HD  2014\u003cbr\u003e\nChevrolet Silverado 2500 HD  2015\u003cbr\u003e\nChevrolet Silverado 2500 HD  2016\u003cbr\u003e\nChevrolet Silverado 2500 HD  2017\u003cbr\u003e\nChevrolet Silverado 2500 HD  2018\u003cbr\u003e\nChevrolet Silverado 2500 HD  2019\u003cbr\u003e\nChevrolet Silverado 2500 HD  2020\u003cbr\u003e\nChevrolet Silverado 2500 HD  2021\u003cbr\u003e\nChevrolet Silverado 2500 HD  2022\u003cbr\u003e\nChevrolet Silverado 2500 HD  2023\u003cbr\u003e\nChevrolet Silverado 2500 HD  2024\u003cbr\u003e\nChevrolet Silverado 3500 HD  2007\u003cbr\u003e\nChevrolet Silverado 3500 HD  2008\u003cbr\u003e\nChevrolet Silverado 3500 HD  2009\u003cbr\u003e\nChevrolet Silverado 3500 HD  2010\u003cbr\u003e\nChevrolet Silverado 3500 HD  2011\u003cbr\u003e\nChevrolet Silverado 3500 HD  2012\u003cbr\u003e\nChevrolet Silverado 3500 HD  2013\u003cbr\u003e\nChevrolet Silverado 3500 HD  2014\u003cbr\u003e\nChevrolet Silverado 3500 HD  2015\u003cbr\u003e\nChevrolet Silverado 3500 HD  2016\u003cbr\u003e\nChevrolet Silverado 3500 HD  2017\u003cbr\u003e\nChevrolet Silverado 3500 HD  2018\u003cbr\u003e\nChevrolet Silverado 3500 HD  2019\u003cbr\u003e\nChevrolet Silverado 3500 HD  2020\u003cbr\u003e\nChevrolet Silverado 3500 HD  2021\u003cbr\u003e\nChevrolet Silverado 3500 HD  2022\u003cbr\u003e\nChevrolet Silverado 3500 HD  2023\u003cbr\u003e\nChevrolet Silverado 3500 HD  2024\u003cbr\u003e\nDodge Ram 1500  1994\u003cbr\u003e\nDodge Ram 1500  1995\u003cbr\u003e\nDodge Ram 1500  1996\u003cbr\u003e\nDodge Ram 1500  1997\u003cbr\u003e\nDodge Ram 1500  1998\u003cbr\u003e\nDodge Ram 1500  1999\u003cbr\u003e\nDodge Ram 1500  2000\u003cbr\u003e\nDodge Ram 1500  2001\u003cbr\u003e\nDodge Ram 1500  2006\u003cbr\u003e\nDodge Ram 1500  2007\u003cbr\u003e\nDodge Ram 1500  2008\u003cbr\u003e\nDodge Ram 1500  2009\u003cbr\u003e\nDodge Ram 1500  2010\u003cbr\u003e\nGMC Canyon  2015\u003cbr\u003e\nGMC Canyon  2016\u003cbr\u003e\nGMC Sierra 1500 HD  2001\u003cbr\u003e\nGMC Sierra 1500 HD  2002\u003cbr\u003e\nGMC Sierra 1500 HD  2003\u003cbr\u003e\nGMC Sierra 1500 HD  2005\u003cbr\u003e\nGMC Sierra 1500 HD  2006\u003cbr\u003e\nGMC Sierra 2500  2001\u003cbr\u003e\nGMC Sierra 2500  2002\u003cbr\u003e\nGMC Sierra 2500  2003\u003cbr\u003e\nGMC Sierra 2500  2004\u003cbr\u003e\nGMC Sierra 2500 HD  2001\u003cbr\u003e\nGMC Sierra 2500 HD  2002\u003cbr\u003e\nGMC Sierra 2500 HD  2003\u003cbr\u003e\nGMC Sierra 2500 HD  2004\u003cbr\u003e\nGMC Sierra 2500 HD  2005\u003cbr\u003e\nGMC Sierra 2500 HD  2006\u003cbr\u003e\nGMC Sierra 2500 HD  2007\u003cbr\u003e\nGMC Sierra 2500 HD  2008\u003cbr\u003e\nGMC Sierra 2500 HD  2009\u003cbr\u003e\nGMC Sierra 2500 HD  2010\u003cbr\u003e\nGMC Sierra 2500 HD  2011\u003cbr\u003e\nGMC Sierra 2500 HD  2012\u003cbr\u003e\nGMC Sierra 2500 HD  2013\u003cbr\u003e\nGMC Sierra 2500 HD  2014\u003cbr\u003e\nGMC Sierra 2500 HD  2015\u003cbr\u003e\nGMC Sierra 2500 HD  2016\u003cbr\u003e\nGMC Sierra 2500 HD  2017\u003cbr\u003e\nGMC Sierra 2500 HD  2018\u003cbr\u003e\nGMC Sierra 2500 HD  2019\u003cbr\u003e\nGMC Sierra 2500 HD  2020\u003cbr\u003e\nGMC Sierra 2500 HD  2021\u003cbr\u003e\nGMC Sierra 2500 HD  2022\u003cbr\u003e\nGMC Sierra 2500 HD  2023\u003cbr\u003e\nGMC Sierra 2500 HD  2024\u003cbr\u003e\nGMC Sierra 3500 HD  2007\u003cbr\u003e\nGMC Sierra 3500 HD  2008\u003cbr\u003e\nGMC Sierra 3500 HD  2009\u003cbr\u003e\nGMC Sierra 3500 HD  2010\u003cbr\u003e\nGMC Sierra 3500 HD  2011\u003cbr\u003e\nGMC Sierra 3500 HD  2012\u003cbr\u003e\nGMC Sierra 3500 HD  2013\u003cbr\u003e\nGMC Sierra 3500 HD  2014\u003cbr\u003e\nGMC Sierra 3500 HD  2015\u003cbr\u003e\nGMC Sierra 3500 HD  2016\u003cbr\u003e\nGMC Sierra 3500 HD  2017\u003cbr\u003e\nGMC Sierra 3500 HD  2018\u003cbr\u003e\nGMC Sierra 3500 HD  2019\u003cbr\u003e\nGMC Sierra 3500 HD  2020\u003cbr\u003e\nGMC Sierra 3500 HD  2021\u003cbr\u003e\nGMC Sierra 3500 HD  2022\u003cbr\u003e\nGMC Sierra 3500 HD  2023\u003cbr\u003e\nGMC Sierra 3500 HD  2024\u003cbr\u003e\nRam 1500  2011\u003cbr\u003e\nRam 1500  2012\u003cbr\u003e\nRam 1500  2013\u003cbr\u003e\nRam 1500  2014\u003cbr\u003e\nRam 1500  2015\u003cbr\u003e\nRam 1500  2016\u003cbr\u003e\nRam 1500  2017","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771613413485,"sku":"ZON7757","price":54.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/zone_nitro-series-gas-shock-pr_a62a596f-702a-4a95-9089-bca8088106db.jpg?v=1792225278"},{"product_id":"bilstein-b6-4600-24-186179-monotube-suspension-shock-absorber","title":"Bilstein B6 4600 24-186179 Monotube Suspension Shock Absorber","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade your stock-height light truck or SUV with the Bilstein B6 4600 suspension shock absorber, part number 24-186179. Designed as a direct-fit replacement for the original equipment shock, this Bilstein shock absorber is specifically tuned for its application to help deliver improved ride quality, handling, and comfort. It fits select Chevrolet Colorado, GMC Canyon, and Isuzu i-350 applications, including model years from 2004 through 2012. Verify vehicle fitment before ordering.\u003cbr\u003eThe Bilstein B6 4600 uses a monotube internal design and a velocity-sensitive digressive piston to respond quickly to changing road conditions. This configuration provides consistent, fade-resistant performance during everyday driving, hauling, and demanding light-truck use. The non-adjustable damping is calibrated for stock-height vehicles, offering a balanced combination of control and comfort without requiring additional setup.\u003cbr\u003eThis shock absorber features a bar-pin upper mount and a 14.4 mm eyelet lower mount for application-specific installation. It includes a blue straight boot and durable yellow-painted finish, while a spring seat and external reservoir are not included. The shock has a collapsed length of 14.26 inches and an extended length of 22.72 inches. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B6 4600 series shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-186179\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning for improved ride quality and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Bar pin\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: 14.4 mm eye\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot Included: Blue straight boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat Included: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSegment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.4mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Bar Pin\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nBoot Included: Blue Straight\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 577.0\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nCollapsed Length (In): 14.26\u003cbr\u003e\nExtended Length (In): 22.72\u003cbr\u003e\nCollapsed Length (Mm): 362.3\u003cbr\u003e\nAaiaid Part Number: BBGL24-186179\u003cbr\u003e\nPart Number: 24-186179\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2004\u003cbr\u003e\nChevrolet Colorado  2005\u003cbr\u003e\nChevrolet Colorado  2006\u003cbr\u003e\nChevrolet Colorado  2007\u003cbr\u003e\nChevrolet Colorado  2008\u003cbr\u003e\nChevrolet Colorado  2009\u003cbr\u003e\nChevrolet Colorado  2010\u003cbr\u003e\nChevrolet Colorado  2011\u003cbr\u003e\nChevrolet Colorado  2012\u003cbr\u003e\nGMC Canyon  2004\u003cbr\u003e\nGMC Canyon  2005\u003cbr\u003e\nGMC Canyon  2006\u003cbr\u003e\nGMC Canyon  2007\u003cbr\u003e\nGMC Canyon  2008\u003cbr\u003e\nGMC Canyon  2009\u003cbr\u003e\nGMC Canyon  2010\u003cbr\u003e\nGMC Canyon  2011\u003cbr\u003e\nGMC Canyon  2012\u003cbr\u003e\nIsuzu i-350  2006\u003cbr\u003e\nIsuzu i-370  2007\u003cbr\u003e\nIsuzu i-370  2008","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771616362605,"sku":"24186179","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-186179_1.jpg?v=1792225344"},{"product_id":"bilstein-b6-4600-24-186162-monotube-suspension-shock-absorber","title":"Bilstein B6 4600 24-186162 Monotube Suspension Shock Absorber","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck or SUV with the Bilstein B6 4600 shock absorber, part number 24-186162. Designed as a direct-fit replacement for original equipment shock absorbers, this application-specific unit helps improve ride quality, handling, and overall driving comfort without requiring vehicle modifications. Its durable yellow-painted finish and black straight protective boot provide a clean, long-lasting appearance.\u003cbr\u003eThe Bilstein B6 4600 uses a monotube internal design for consistent, fade-resistant performance under demanding driving conditions. A velocity-sensitive, digressive piston responds quickly to changing road surfaces, helping maintain better tire contact and improved control over bumps, uneven pavement, and load changes. Bilstein tunes each shock absorber for its intended application to deliver balanced performance on stock-height vehicles.\u003cbr\u003eFeature: Brand Bilstein; Feature: Series B6 4600; Feature: Part number 24-186162; Feature: Direct-fit upgrade for stock-height light trucks and SUVs; Feature: Monotube internal design; Feature: Velocity-sensitive, digressive piston; Feature: Non-adjustable damping; Feature: Yellow-painted finish; Feature: Black straight protective boot; Feature: No external reservoir; Feature: Upper stem mount; Feature: Lower 12 mm eye mount; Feature: Spring seat not included; Feature: Designed for light-truck applications.\u003cbr\u003eThis Bilstein B6 4600 shock absorber is listed for select Chevrolet Colorado, GMC Canyon, and Isuzu i-350 applications, including model years from 2004 through 2012. Verify vehicle compatibility, suspension configuration, and mounting style before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B6 4600\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-186162\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Design: Velocity-sensitive, digressive\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black straight protective boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 12 mm eye\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Segment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nCollapsed Length (In): 9.76\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 14.65\u003cbr\u003e\nCollapsed Length (Mm): 247.8\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 372.0\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Straight\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-186162\u003cbr\u003e\nPart Number: 24-186162\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2004\u003cbr\u003e\nChevrolet Colorado  2005\u003cbr\u003e\nChevrolet Colorado  2006\u003cbr\u003e\nChevrolet Colorado  2007\u003cbr\u003e\nChevrolet Colorado  2008\u003cbr\u003e\nChevrolet Colorado  2009\u003cbr\u003e\nChevrolet Colorado  2010\u003cbr\u003e\nChevrolet Colorado  2011\u003cbr\u003e\nChevrolet Colorado  2012\u003cbr\u003e\nGMC Canyon  2004\u003cbr\u003e\nGMC Canyon  2005\u003cbr\u003e\nGMC Canyon  2006\u003cbr\u003e\nGMC Canyon  2007\u003cbr\u003e\nGMC Canyon  2008\u003cbr\u003e\nGMC Canyon  2009\u003cbr\u003e\nGMC Canyon  2010\u003cbr\u003e\nGMC Canyon  2011\u003cbr\u003e\nGMC Canyon  2012\u003cbr\u003e\nIsuzu i-350  2006\u003cbr\u003e\nIsuzu i-370  2007\u003cbr\u003e\nIsuzu i-370  2008","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771616985197,"sku":"24186162","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-186162_1.jpg?v=1792225363"},{"product_id":"zone-offroad-nitro-smooth-body-shock-zon7607-for-chevrolet-colorado-and-gmc-canyon","title":"Zone Offroad Nitro Smooth Body Shock ZON7607 for Chevrolet Colorado and GMC Canyon","description":"Zone Nitro Smooth Body Shock\n\u003cp\u003eUpgrade your truck’s suspension with the Zone Offroad Nitro Smooth Body Shock, Part Number ZON7607. Designed to provide stock-like control with enhanced performance, this vehicle-specific shock absorber uses fully displaced valving to improve compression and extension travel. The twin-tube design and 10-stage velocity-sensitive valving help deliver controlled handling and a comfortable ride across both on-road and off-road conditions.\u003cbr\u003eThe shock is pressurized with 50 psi of nitrogen gas to support quick response and help reduce aeration during demanding suspension movement. A Fluon-banded piston promotes smooth, consistent operation, while the durable steel construction is built for dependable service. The shock includes the required bushings and sleeves and is sold individually. It is not tunable and is suitable for vehicles with any lift height.\u003cbr\u003eZone Offroad ZON7607 uses an EB1 lower mount and BP8 upper mount for application-specific installation. Installation is rated at 1 out of 5 in difficulty and typically requires approximately 30 minutes, with no metal cutting required. This shock fits select 2004–2012 Chevrolet Colorado and GMC Canyon applications, including model years 2004, 2005, 2006, 2007, and 2012. Verify vehicle fitment before ordering. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwin-tube, nitrogen-charged design supports responsive suspension control and reduced aeration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e10-stage velocity-sensitive valving provides balanced on-road and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific valving improves compression and extension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFluon-banded piston promotes smooth, consistent shock operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteel construction provides durable service for truck and off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuitable for vehicles with any lift height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEB1 lower mount and BP8 upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes bushings and sleeves\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation difficulty: 1 out of 5\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation time: approximately 30 minutes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo metal cutting required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSold individually\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nMaterial: Steel\u003cbr\u003e\nFor Use With Lift Heights: Any\u003cbr\u003e\nSeries: Nitro\u003cbr\u003e\nInstallation Difficulty: 1 out of 5\u003cbr\u003e\nInstallation Time: 0.5\u003cbr\u003e\nShock Compressed Length: 14.20\u003cbr\u003e\nShock Extended Length: 23.20\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nTechnology: Twin Tube\u003cbr\u003e\nTunable: No\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: EB1\u003cbr\u003e\nUpper Mount Type: BP8\u003cbr\u003e\nBody Diameter: 2-3\/8\"\u003cbr\u003e\nAaiaid Part Number: FQMSZON7607\u003cbr\u003e\nPart Number: ZON7607\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2004\u003cbr\u003e\nChevrolet Colorado  2005\u003cbr\u003e\nChevrolet Colorado  2006\u003cbr\u003e\nChevrolet Colorado  2007\u003cbr\u003e\nChevrolet Colorado  2008\u003cbr\u003e\nChevrolet Colorado  2009\u003cbr\u003e\nChevrolet Colorado  2010\u003cbr\u003e\nChevrolet Colorado  2011\u003cbr\u003e\nChevrolet Colorado  2012\u003cbr\u003e\nGMC Canyon  2004\u003cbr\u003e\nGMC Canyon  2005\u003cbr\u003e\nGMC Canyon  2006\u003cbr\u003e\nGMC Canyon  2007\u003cbr\u003e\nGMC Canyon  2008\u003cbr\u003e\nGMC Canyon  2009\u003cbr\u003e\nGMC Canyon  2010\u003cbr\u003e\nGMC Canyon  2011\u003cbr\u003e\nGMC Canyon  2012","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771619115117,"sku":"ZON7607","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/zone_nitro-series-gas-shock-pr_9138b9ec-0447-49fa-ac8a-edef425161c2.jpg?v=1792225423"},{"product_id":"skyjacker-hydro-7000-shock-absorber-h7084-with-red-boot","title":"Skyjacker Hydro 7000 Shock Absorber H7084 with Red Boot","description":"\u003cp\u003eUpgrade suspension control with the Skyjacker Hydro 7000 Shock Absorber H7084, designed to help manage spring energy during compression and rebound. This high-quality shock absorber uses true velocity-sensitive valving to provide controlled damping across changing road and suspension conditions. The included red boot adds a distinctive appearance while helping protect the shock shaft from road debris.\u003cbr\u003eThe Skyjacker H7084 controls the movement of the suspension springs rather than absorbing the initial impact of bumps. During compression, also called bump, the shock controls how quickly the suspension moves together. During rebound, or extension, it regulates how quickly the suspension returns. This balanced damping action can help improve ride control, handling, and suspension stability for compatible applications.\u003cbr\u003eThis Skyjacker shock absorber is designed for select Chevrolet Colorado, GMC Canyon, and Isuzu i-280 and i-350 models. Confirm vehicle application and mounting requirements before installation to ensure proper fitment. The H7084 is backed by a limited lifetime warranty for added ownership confidence. This product contains a California Proposition 65 warning: Cancer and\/or other reproductive harm. For more information, visit www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTrue velocity-sensitive valving helps provide consistent suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRed protective boot helps shield the shock shaft from road debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eControls compression and rebound movement for improved ride and handling stability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for select 2004-2012 Chevrolet Colorado and GMC Canyon applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2006 Isuzu i-280 and i-350 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 14.820 in.\u003cbr\u003e\nExtended Length: 24.840 in.\u003cbr\u003e\nShock Stroke: 10.020 in.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nProp 65 Short Label: California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov)\u003cbr\u003e\nAaiaid Part Number: BHNGH7084\u003cbr\u003e\nPart Number: H7084\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nCadillac Escalade 1999\u003cbr\u003e\nCadillac Escalade 2000\u003cbr\u003e\nChevrolet Colorado 2004\u003cbr\u003e\nChevrolet Colorado 2005\u003cbr\u003e\nChevrolet Colorado 2006\u003cbr\u003e\nChevrolet Colorado 2007\u003cbr\u003e\nChevrolet Colorado 2008\u003cbr\u003e\nChevrolet Colorado 2009\u003cbr\u003e\nChevrolet Colorado 2010\u003cbr\u003e\nChevrolet Colorado 2011\u003cbr\u003e\nChevrolet Colorado 2012\u003cbr\u003e\nChevrolet K1500 Suburban 1992\u003cbr\u003e\nChevrolet K1500 Suburban 1993\u003cbr\u003e\nChevrolet K1500 Suburban 1994\u003cbr\u003e\nChevrolet K1500 Suburban 1995\u003cbr\u003e\nChevrolet K1500 Suburban 1996\u003cbr\u003e\nChevrolet K1500 Suburban 1997\u003cbr\u003e\nChevrolet K1500 Suburban 1998\u003cbr\u003e\nChevrolet K2500 Suburban 1992\u003cbr\u003e\nChevrolet K2500 Suburban 1993\u003cbr\u003e\nChevrolet K2500 Suburban 1994\u003cbr\u003e\nChevrolet K2500 Suburban 1995\u003cbr\u003e\nChevrolet K2500 Suburban 1996\u003cbr\u003e\nChevrolet K2500 Suburban 1997\u003cbr\u003e\nChevrolet K2500 Suburban 1998\u003cbr\u003e\nGMC Canyon 2004\u003cbr\u003e\nGMC Canyon 2005\u003cbr\u003e\nGMC Canyon 2006\u003cbr\u003e\nGMC Canyon 2007\u003cbr\u003e\nGMC Canyon 2008\u003cbr\u003e\nGMC Canyon 2009\u003cbr\u003e\nGMC Canyon 2010\u003cbr\u003e\nGMC Canyon 2011\u003cbr\u003e\nGMC Canyon 2012\u003cbr\u003e\nGMC K1500 Suburban 1992\u003cbr\u003e\nGMC K1500 Suburban 1993\u003cbr\u003e\nGMC K1500 Suburban 1994\u003cbr\u003e\nGMC K1500 Suburban 1995\u003cbr\u003e\nGMC K1500 Suburban 1996\u003cbr\u003e\nGMC K1500 Suburban 1997\u003cbr\u003e\nGMC K1500 Suburban 1998\u003cbr\u003e\nGMC K2500 1994\u003cbr\u003e\nGMC K2500 Suburban 1992\u003cbr\u003e\nGMC K2500 Suburban 1993\u003cbr\u003e\nGMC K2500 Suburban 1994\u003cbr\u003e\nGMC K2500 Suburban 1995\u003cbr\u003e\nGMC K2500 Suburban 1996\u003cbr\u003e\nGMC K2500 Suburban 1997\u003cbr\u003e\nGMC K2500 Suburban 1998\u003cbr\u003e\nIsuzu i-280 2006\u003cbr\u003e\nIsuzu i-290 2007\u003cbr\u003e\nIsuzu i-290 2008\u003cbr\u003e\nIsuzu i-350 2006\u003cbr\u003e\nIsuzu i-370 2007\u003cbr\u003e\nIsuzu i-370 2008","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771783184493,"sku":"H7084","price":51.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/H7084.jpg?v=1792229339"},{"product_id":"fabtech-dirt-logic-2-25-stainless-steel-non-reservoir-shock-absorber-fts81171","title":"Fabtech Dirt Logic 2.25 Stainless Steel Non-Reservoir Shock Absorber FTS81171","description":"Dirt Logic 2.25 Stainless Steel Non-Resi Shock Absorber\n\u003cp\u003eUpgrade suspension performance on select Chevrolet Colorado and GMC Canyon models with the Fabtech Dirt Logic 2.25 Stainless Steel Non-Reservoir Shock Absorber, part number FTS81171. Designed for demanding driving conditions, this shock absorber combines durable stainless steel construction with application-specific valving to provide controlled damping, improved ride quality, and dependable performance on and off the road.\u003cbr\u003eThe Dirt Logic 2.25 shock absorber is engineered for compatible 2023–2026 Chevrolet Colorado and GMC Canyon applications. Its 9.51-inch stroke and extended length of 28.8 inches support the suspension movement needed for capable truck performance, while the collapsed length of 16.31 inches allows proper fitment within the specified suspension configuration. The non-reservoir design offers a straightforward installation for applications requiring reliable shock control without an external reservoir.\u003cbr\u003eFabtech builds the Dirt Logic 2.25 series for drivers who expect robust suspension components and consistent performance during daily driving, trail use, and other demanding conditions. Before installation, verify vehicle year, make, model, and suspension configuration to ensure compatibility. Professional installation is recommended when suspension components are replaced or upgraded. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eStainless steel construction for durability and corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-reservoir shock absorber design for simplified installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e9.51-inch shock stroke for controlled suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e28.8-inch extended length and 16.31-inch collapsed length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for select 2023–2026 Chevrolet Colorado and GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech Dirt Logic 2.25 series performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number FTS81171\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 16.31\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length: 28.8 in\u003cbr\u003e\nShock Stroke: 9.51 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS81171\u003cbr\u003e\nPart Number: FTS81171\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771812380781,"sku":"FTS81171","price":340.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/DE2A9075.jpg?v=1792230545"},{"product_id":"fabtech-performance-shock-absorber-fts7232-for-2004-2008-chevrolet-colorado-and-gmc-canyon","title":"Fabtech Performance Shock Absorber FTS7232 for 2004-2008 Chevrolet Colorado and GMC Canyon","description":"\u003cp\u003eThe Fabtech Performance Shock Absorber FTS7232 is engineered to work with Fabtech lift kits and suspension systems, delivering controlled handling and a more consistent ride on and off the road. Its high-velocity 9-stage valving provides responsive damping across changing terrain, while the closed-cell insert helps reduce shock fade during extended high-speed driving and demanding suspension use.\u003cbr\u003eDesigned as a dependable replacement or upgrade for compatible lifted applications, this Fabtech shock absorber supports improved ride control without compromising suspension performance. The carefully tuned damping characteristics help manage suspension movement, maintain tire contact, and provide predictable vehicle behavior over uneven surfaces. The FTS7232 is suitable for select 2004-2008 Chevrolet Colorado and GMC Canyon models; verify vehicle configuration and lift-kit compatibility before installation.\u003cbr\u003eThe shock absorber features a collapsed length of 14.42 inches, an extended length of 23.95 inches, and a 9.53-inch shock stroke. These specifications allow it to accommodate the suspension travel associated with compatible Fabtech lift systems. The Fabtech FTS7232 is built for enthusiasts and installers seeking suspension components designed specifically for lifted truck applications. Professional installation is recommended to ensure proper fitment, torque specifications, and suspension alignment. California Proposition 65 warning: This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePerformance shock absorber designed to work with Fabtech lift kits and suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh-velocity 9-stage valving provides controlled damping and responsive ride performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eClosed-cell insert helps reduce shock fade during high-speed or extended-duty use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length: 14.42 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length: 23.95 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock stroke: 9.53 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2004-2008 Chevrolet Colorado and GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 14.42\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 23.95 in\u003cbr\u003e\nShock Stroke: 9.53 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS7232\u003cbr\u003e\nPart Number: FTS7232\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2004\u003cbr\u003e\nChevrolet Colorado  2005\u003cbr\u003e\nChevrolet Colorado  2006\u003cbr\u003e\nChevrolet Colorado  2007\u003cbr\u003e\nChevrolet Colorado  2008\u003cbr\u003e\nGMC Canyon  2004\u003cbr\u003e\nGMC Canyon  2005\u003cbr\u003e\nGMC Canyon  2006\u003cbr\u003e\nGMC Canyon  2007\u003cbr\u003e\nGMC Canyon  2008\u003cbr\u003e\nNissan Frontier  2000\u003cbr\u003e\nNissan Frontier  2001\u003cbr\u003e\nNissan Frontier  2002\u003cbr\u003e\nNissan Xterra  2000\u003cbr\u003e\nNissan Xterra  2001\u003cbr\u003e\nNissan Xterra  2002","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771925201005,"sku":"FTS7232","price":58.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts7232-kit.jpg?v=1792232254"},{"product_id":"fabtech-dirt-logic-2-5-stainless-steel-reservoir-coilover-shock-absorber-fts21305","title":"Fabtech Dirt Logic 2.5 Stainless Steel Reservoir Coilover Shock Absorber FTS21305","description":"Dirt Logic 2.5 Stainless Steel Resi Coil Over Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your truck with the Fabtech Dirt Logic 2.5 Stainless Steel Reservoir Coilover Shock Absorber, part number FTS21305. Designed for select Chevrolet Colorado and GMC Canyon applications, this coilover combines durable construction with tunable performance for improved control on the street and off road. Its stainless steel body is engineered to resist corrosion and withstand demanding driving conditions.\u003cbr\u003eThe Dirt Logic 2.5 coilover features a remote reservoir design that helps support consistent damping performance during extended use. The coilover configuration allows the shock and spring assembly to work together as a complete suspension component, helping enhance ride quality, vehicle stability, and off-road handling. It is a direct-fit suspension solution for compatible applications and is built to Fabtech standards for dependable performance.\u003cbr\u003eThis Fabtech shock absorber fits 2023-2026 Chevrolet Colorado and GMC Canyon models, including select configurations. Verify vehicle application and suspension setup before ordering to ensure compatibility. Professional installation is recommended for proper fitment, adjustment, and suspension system operation. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS21305\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Dirt Logic 2.5 stainless steel reservoir coilover shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Corrosion-resistant stainless steel body for demanding use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Reservoir-equipped coilover assembly for consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits select 2023-2026 Chevrolet Colorado and GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Direct-fit suspension component; professional installation recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS21305\u003cbr\u003e\nPart Number: FTS21305\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772229353581,"sku":"FTS21305","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/2.5_RESI.png?v=1792237926"},{"product_id":"fabtech-fts21304-shock-spacer-kit-for-2023-2026-chevrolet-colorado-and-gmc-canyon","title":"Fabtech FTS21304 Shock Spacer Kit for 2023–2026 Chevrolet Colorado and GMC Canyon","description":"\u003cp\u003eUpgrade suspension performance with the Fabtech FTS21304 Shock Spacer Kit, designed for select 2023–2026 Chevrolet Colorado and GMC Canyon applications. This kit helps provide the necessary spacing for compatible shock and coilover suspension configurations while supporting proper installation and dependable functionality. Manufactured by Fabtech, the FTS21304 is a purpose-built suspension component for drivers and installers seeking a reliable fit for their late-model truck or SUV.\u003cbr\u003eThe Fabtech FTS21304 Shock Spacer Kit is engineered for use with the vehicle applications listed below and is suitable for suspension upgrades, replacement installations, or custom suspension setups where additional shock spacing is required. Its application-specific design helps simplify installation and maintain compatibility with the surrounding suspension components when used as intended. Verify vehicle year, model, and suspension configuration before ordering to ensure the correct application.\u003cbr\u003eCompatible applications include the 2023, 2024, 2025, and 2026 Chevrolet Colorado, as well as the 2023, 2024, 2025, and 2026 GMC Canyon. Professional installation is recommended for suspension components, and all hardware should be installed and tightened according to the applicable vehicle and Fabtech installation instructions. This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS21304\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Shock spacer kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Compatible with select 2023–2026 Chevrolet Colorado models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Compatible with select 2023–2026 GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFunction: Supports proper shock and coilover spacing during suspension installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Application-specific construction for dependable fit and functionality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation is recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS21304\u003cbr\u003e\nPart Number: FTS21304\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772229714029,"sku":"FTS21304","price":90.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/LIFETSTYLE_Chevy.jpg?v=1792237938"},{"product_id":"maxtrac-2-rear-lift-box-kit-w-fox-shocks-900420f-for-2015-2022-chevrolet-colorado-2015-2022-gmc-canyon","title":"MaxTrac 2\" Rear Lift Box Kit W\/ Fox Shocks 900420F for 2015-2022 Chevrolet Colorado, 2015-2022 GMC Canyon","description":"\u003cp\u003e\u003cstrong\u003eMax Trac Suspension's Part# 900420F Is A Rear Box Kit Including 2\" Lift Blocks, U-Bolts \u0026amp; A Pair Of Fox 2.0 Performance Series Rear Shocks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: MaxTrac\u003c\/li\u003e\n\u003cli\u003ePart Number: 900420F\u003c\/li\u003e\n\u003cli\u003eColor: BLACK\u003c\/li\u003e\n\u003cli\u003eFinish: BLACK POWDERCOAT\u003c\/li\u003e\n\u003cli\u003eMaterial: STEEL\u003c\/li\u003e\n\u003cli\u003eShock Details: R: 772126F (X2)\u003c\/li\u003e\n\u003cli\u003eLift Rear (Inches): 2\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003c\/p\u003e","brand":"MaxTrac","offers":[{"title":"Default Title","offer_id":67948919259245,"sku":"900420F","price":666.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/9c55706f1bc21.jpg?v=1793859547"}],"url":"https:\/\/truckarmy.com\/collections\/chevy-colorado-shocks.oembed","provider":"Truck Army","version":"1.0","type":"link"}