{"title":"Ford Bronco Shocks","description":"\u003cp\u003eNew shocks are the quickest way to tighten up a tired ride on your Ford Bronco, and a must after a lift.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift height:\u003c\/strong\u003e shocks are sold for stock height or a lift range, so match yours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear\u003c\/strong\u003e are different parts and most are sold individually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrivetrain and trim:\u003c\/strong\u003e 2WD, 4WD and off-road trims can take different shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelect your vehicle in the vehicle bar above to see only parts that fit.\u003c\/p\u003e","products":[{"product_id":"bilstein-b8-6100-ride-height-adjustable-monotube-shock-absorber-24-325578-for-ford-bronco","title":"Bilstein B8 6100 Ride Height Adjustable Monotube Shock Absorber 24-325578 for Ford Bronco","description":"B8 6100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck or SUV suspension with the Bilstein B8 6100 ride height adjustable shock absorber, part number 24-325578. Designed for front OE coilover-style suspension systems, this performance shock uses multiple snap-ring grooves to reposition the spring seat and provide a ride-height adjustment range of up to 3 inches, depending on the application. It fits the 2021–2026 Ford Bronco and is engineered for drivers who need improved control, durability, and performance on rough terrain.\u003cbr\u003eThe B8 6100 features a large 60mm monotube body that increases oil capacity, improves heat dissipation, and supports consistent performance during demanding use. Its 60mm digressive piston responds quickly to changing terrain, helping provide a smoother ride while maintaining stronger control over bumps, uneven surfaces, and rugged roads. The zinc-plated finish adds corrosion resistance for long-term service in challenging conditions.\u003cbr\u003eThis Bilstein shock absorber includes a spring seat and uses a stem-style upper mount with a 20.2mm eye lower mount. It has non-adjustable damping, an 18mm shaft, and no external reservoir or protective boot. The shock extends to 25.56 inches, collapses to 17.11 inches, and provides 8.45 inches of travel. Installation and compatibility should be verified against the vehicle’s suspension configuration before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRide height adjustable: Multiple snap-ring grooves allow spring seat positioning for up to 3 inches of adjustment, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube design: Provides consistent damping performance and efficient heat management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e60mm piston: Supports increased oil capacity, improved cooling, and enhanced durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDigressive damping: Helps deliver a smoother ride with improved control over rough terrain\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2021–2026 Ford Bronco models with compatible front OE coilover-style suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Stem-style upper mount and 20.2mm eye lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat: Included for adjustable coilover installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping adjustment: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated for added corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: Provides 8.45 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number: Bilstein 24-325578\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 649.3\u003cbr\u003e\nCollapsed Length (In): 17.11\u003cbr\u003e\nStroke\/Travel Length (In): 8.45\u003cbr\u003e\nLower Mount Type: Eye 20.2mm\u003cbr\u003e\nSeries: B8 6100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 434.6\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 214.6\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nExtended Length (In): 25.56\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-325578\u003cbr\u003e\nPart Number: 24-325578\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771470970989,"sku":"24325578","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-325578_1.jpg?v=1792222906"},{"product_id":"bilstein-b8-6100-ride-height-adjustable-front-suspension-shock-absorber-24-325561-for-ford-bronco","title":"Bilstein B8 6100 Ride Height Adjustable Front Suspension Shock Absorber 24-325561 for Ford Bronco","description":"B8 6100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your truck or SUV with the Bilstein B8 6100 Ride Height Adjustable shock absorber, part number 24-325561. Designed for vehicles with a front original-equipment coilover-style suspension, this monotube shock features multiple snap-ring grooves that allow the spring seat position to be adjusted. Depending on the application, the adjustable design can provide up to 3 inches of ride-height range while maintaining controlled suspension movement.\u003cbr\u003eThe Bilstein B8 6100 uses a large 2.65-inch outside-diameter body and a 60mm digressive piston to increase oil capacity, heat dissipation, and long-term durability. This design helps deliver a smoother ride and improved control over rough terrain, uneven roads, and other demanding driving conditions. The zinc-plated finish adds corrosion resistance, while the included spring seat supports proper coilover installation.\u003cbr\u003eThis non-adjustable damping shock absorber has a crossbar lower mount, stem upper mount, 18mm shaft, and no external reservoir or boot. It provides 22.80 inches of extended length, 16.62 inches of collapsed length, and 6.18 inches of travel. The Bilstein B8 6100 24-325561 is designed for light-truck applications and fits the 2021–2026 Ford Bronco. Professional installation is recommended, and vehicle-specific fitment should be confirmed before ordering. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: B8 6100 Ride Height Adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front coilover-style suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height Adjustment: Up to 3 inches, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring grooved coilover body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Size: 2.65-inch outside diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Crossbar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 18mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.80 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 16.62 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 6.18 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 579.2\u003cbr\u003e\nCollapsed Length (In): 16.62\u003cbr\u003e\nStroke\/Travel Length (In): 6.18\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nSeries: B8 6100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 422.2\u003cbr\u003e\nStroke\/Travel Length (Mm): 157.0\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-325561\u003cbr\u003e\nPart Number: 24-325561\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771479425133,"sku":"24325561","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-325561_1.jpg?v=1792222924"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-323567-for-ford-bronco","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-323567 for Ford Bronco","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your 2021–2026 Ford Bronco with the Bilstein B8 5100 ride height adjustable shock absorber, part number 24-323567. Designed for vehicles with an OE coilover-style suspension, this shock uses multiple snap-ring grooves to provide adjustable spring-seat positioning and up to 3 inches of front lift with the original equipment springs, depending on the application. It is an effective solution for leveling the vehicle while improving control and usable wheel travel.\u003cbr\u003eThe Bilstein B8 5100 features a 46mm monotube design with a digressive piston and self-adjusting deflective disc valving. This configuration delivers consistent damping, fade-resistant performance, and responsive handling across changing road and trail conditions. The zinc-plated finish supports long-term durability, while the snap-ring grooved coilover body allows ride-height adjustment without requiring a separate lift spring. The shock uses non-adjustable damping and does not include a reservoir.\u003cbr\u003eThis Bilstein shock absorber is engineered for light-truck applications and uses an eye-style lower mount with a stem-style upper mount. The original equipment spring seat should be reused because a spring seat is not included. The unit also does not include a boot. With a compressed length of 17.11 inches, an extended length of 25.56 inches, and 8.45 inches of travel, the 24-323567 provides dependable suspension control for compatible Ford Bronco configurations. Verify application details and mounting requirements before installation. California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-323567\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5100 Ride Height Adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front suspension shock absorber for OE coilover-style systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height Adjustment: Multiple snap-ring grooves provide up to 3 inches of front lift with OE springs, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube with digressive piston and self-adjusting deflective disc valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Eye-style lower mount and stem-style upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 8.45 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included; reuse the original equipment spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSegment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 20.2mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 434.6\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nStroke\/Travel Length (Mm): 214.6\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (In): 25.56\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No - Reuse OEM\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 649.3\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.11\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 8.45\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-323567\u003cbr\u003e\nPart Number: 24-323567\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771500888173,"sku":"24323567","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-323567_1.jpg?v=1792222980"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-323550-for-ford-bronco","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-323550 for Ford Bronco","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your 2021–2026 Ford Bronco with the Bilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-323550. Designed for trucks and SUVs with a front original-equipment coilover-style suspension, this shock uses multiple snap-ring grooves to adjust the spring seat position. With compatible OE springs, the adjustable design can provide approximately 0–3 inches of front lift, helping level the vehicle while increasing wheel travel and improving handling.\u003cbr\u003eThe Bilstein B8 5100 features a 46mm monotube design with a digressive piston and self-adjusting deflective disc valve technology. This configuration delivers consistent, fade-resistant damping across changing road and trail conditions while maintaining responsive suspension control. The zinc-plated finish supports durability, and the non-adjustable damping is tuned for dependable performance without requiring manual settings.\u003cbr\u003eThis Bilstein shock absorber uses a snap-ring-grooved coilover body, a crossbar lower mount, and a stem-style upper mount. The OEM spring seat must be reused, and no boot or reservoir is included. The shock has a 22.80-inch extended length, a 16.62-inch collapsed length, and 6.17 inches of travel. It is intended for the front suspension of applicable Ford Bronco models and should be matched with the correct vehicle configuration before installation. A Prop 65 warning applies: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Front suspension shock absorber for compatible 2021–2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 Ride Height Adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-323550\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustment Range: Provides approximately 0–3 inches of front lift with compatible OE springs, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube construction with digressive piston technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable with self-adjusting deflective disc valve control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring-grooved coilover body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Crossbar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.80 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 16.62 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 6.17 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Reuse OEM spring seat; not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 422.2\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 156.7\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No - Reuse OEM\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 579.2\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 16.62\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 6.17\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-323550\u003cbr\u003e\nPart Number: 24-323550\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771508359277,"sku":"24323550","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-323550_2.jpg?v=1792223002"},{"product_id":"bilstein-b8-6100-ride-height-adjustable-monotube-shock-absorber-24-318594-for-ford-bronco","title":"Bilstein B8 6100 Ride Height Adjustable Monotube Shock Absorber 24-318594 for Ford Bronco","description":"B8 6100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck or SUV suspension with the Bilstein B8 6100 ride height adjustable shock absorber, part number 24-318594. Designed for vehicles equipped with a front original-equipment coilover-style suspension, this shock uses multiple snap-ring grooves in the body to provide adjustable spring-seat positioning and a ride-height adjustment range of up to 3 inches, depending on the application. It is engineered for the 2021–2026 Ford Bronco and is an excellent choice for drivers who need improved control and durability on rough roads and challenging terrain.\u003cbr\u003eThe B8 6100 features a large 2.65-inch body with a 60mm digressive piston, increasing oil capacity and improving heat dissipation for consistent performance during demanding driving conditions. Its monotube internal design helps maintain responsive damping, while the zinc-plated finish provides added protection against corrosion. The shock is non-adjustable for damping and does not include a remote reservoir or protective boot. A spring seat is included to support the adjustable coilover-style installation.\u003cbr\u003eThis Bilstein shock absorber uses a crossbar lower mount and stem upper mount for application-specific installation. It has a 16.62-inch collapsed length, a 22.80-inch extended length, and 6.18 inches of stroke. The 18mm shaft is designed for strength and long-term reliability, while the large piston and body support controlled handling without sacrificing ride comfort. Verify vehicle configuration and suspension compatibility before installation. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: B8 6100 ride height adjustable suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-318594\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring grooved coilover body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height Adjustment: Up to 3 inches, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Crossbar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.80 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 16.62 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 6.18 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProp 65 Warning: Cancer and reproductive harm; visit www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nSeries: B8 6100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 422.2\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 157.0\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 579.2\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 16.62\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 6.18\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-318594\u003cbr\u003e\nPart Number: 24-318594\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771510194285,"sku":"24318594","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-318594_1.jpg?v=1792223018"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-313971-for-ford-bronco","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-313971 for Ford Bronco","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eBilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-313971, is engineered for select Ford Bronco models with a front original-equipment coilover-style suspension. Designed for light-truck applications, this front shock absorber helps improve ride control, handling, and wheel travel while providing a practical way to level the vehicle when used with the original equipment springs.\u003c\/p\u003e\n\u003cp\u003eThe snap-ring grooved body provides multiple spring-seat positions, allowing approximately 0 to 3 inches of front lift depending on the vehicle application and selected setting. The spring seat is not included and is designed for reuse of the original equipment component. This Bilstein B8 5100 shock absorber features a 46mm monotube design with a digressive piston and self-adjusting deflective-disc valve technology for consistent damping and fade-resistant performance across changing road and load conditions. Damping is non-adjustable, and no external reservoir is used.\u003c\/p\u003e\n\u003cp\u003eBuilt for durability, the shock absorber uses a zinc-plated finish, an 18mm shaft, a crossbar lower mount, and a stem-style upper mount. Its travel range supports demanding suspension movement while the monotube internal design promotes reliable heat dissipation. This unit does not include a protective boot. It is intended for the front suspension and should be installed according to the vehicle manufacturer’s procedures, with proper attention to spring, mount, and alignment requirements.\u003c\/p\u003e\n\u003cp\u003eBilstein B8 5100 part number 24-313971 fits select 2021–2026 Ford Bronco models. Verify vehicle configuration, suspension type, and application details before ordering. California Proposition 65 warning: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\n\u003cli\u003ePart Number: 24-313971\u003c\/li\u003e\n\u003cli\u003eSeries: B8 5100 Ride Height Adjustable\u003c\/li\u003e\n\u003cli\u003eApplication: Front suspension shock absorber for select Ford Bronco models\u003c\/li\u003e\n\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\n\u003cli\u003eRide Height Adjustment: Multiple snap-ring grooves provide approximately 0–3 inches of front lift depending on application\u003c\/li\u003e\n\u003cli\u003eInternal Design: 46mm monotube with digressive piston and self-adjusting deflective-disc valve\u003c\/li\u003e\n\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\n\u003cli\u003eBody Design: Snap-ring grooved coilover body\u003c\/li\u003e\n\u003cli\u003eSpring Seat: Not included; reuse the original equipment spring seat\u003c\/li\u003e\n\u003cli\u003eLower Mount: Crossbar\u003c\/li\u003e\n\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\n\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\n\u003cli\u003eReservoir: None\u003c\/li\u003e\n\u003cli\u003eProtective Boot: Not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (Mm): 422.2\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 157.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 579.2\u003cbr\u003e\nCollapsed Length (In): 16.62\u003cbr\u003e\nStroke\/Travel Length (In): 6.18\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nSpring Seat Included: No - Reuse OEM\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-313971\u003cbr\u003e\nPart Number: 24-313971\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771513372781,"sku":"24313971","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-313971_1.jpg?v=1792223205"},{"product_id":"jks-jks8309-rear-lower-shock-skid-plates-with-roost-guards-for-2021-2025-ford-bronco","title":"JKS JKS8309 Rear Lower Shock Skid Plates with Roost Guards for 2021-2025 Ford Bronco","description":"2021-2026 Ford Bronco - Rear Lower Shock Skid\/Roost Guard (Black Struts\/Coilover\n\u003cp\u003eProtect the vulnerable rear lower shock mounts on your 2021-2025 Ford Bronco with JKS JKS8309 Rear Lower Shock Skid Plates. Designed for off-road use, these skid plates reinforce the factory shock mounts and help shield the lower shocks from rocks, ledges, and other trail obstacles. Their integrated roost guards provide additional protection for the front of the shock body or coilover against stones and debris thrown up by the tires.\u003cbr\u003eConstructed from durable 3\/16-inch steel, the JKS JKS8309 skid plates deliver dependable strength and resistance to trail impacts without compromising the factory mounting location. The precision-focused design works with the Bronco’s existing rear suspension layout, helping protect critical components while you navigate challenging terrain. These guards are an effective upgrade for drivers who want added underbody protection during recreational trail riding, rock crawling, and overland travel.\u003cbr\u003eA durable black powder-coated finish helps resist corrosion and gives the skid plates a clean, low-profile appearance beneath the vehicle. Stainless steel JKS badges add a distinctive finishing detail while identifying the quality construction of the product. The JKS JKS8309 rear lower shock skid plates are engineered for Ford Bronco models from 2021 through 2025 and are intended to help extend shock and mount durability in demanding off-road conditions.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eConstruction: Made from 3\/16-inch steel for strength and long-term durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtection: Reinforces and shields the factory rear lower shock mounts from rocks and trail obstacles\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRoost Guard: Integrated guard helps protect the front of the shock body or coilover from stones and debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Durable black powder coating helps resist corrosion and complements the Bronco chassis\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBranding: Includes stainless steel JKS badges for a clean, finished appearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Designed for 2021-2025 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAaiaid Part Number: BKWDJKS8309\u003cbr\u003e\nPart Number: JKS8309\u003cbr\u003e\nBrand Aaia: BKWD\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025","brand":"JKS","offers":[{"title":"Default Title","offer_id":67771564556397,"sku":"JKS8309","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/JKS8309_01.jpg?v=1792224332"},{"product_id":"bilstein-b1-suspension-shock-absorber-conversion-kit-11-344841-for-2021-2026-ford-bronco","title":"Bilstein B1 Suspension Shock Absorber Conversion Kit 11-344841 for 2021-2026 Ford Bronco","description":"B1 (Components) - Suspension Shock Absorber Conversion Kit\n\u003cp\u003eRestore the intended lift height and suspension performance of your 2021-2026 Ford Bronco with the Bilstein B1 (Components) Suspension Shock Absorber Conversion Kit, part number 11-344841. Designed for Broncos equipped with Bilstein B8 6112 or 6100 shock absorbers, this kit helps compensate for additional constant weight from aftermarket bumpers, winches, racks, and other accessories.\u003cbr\u003eThe Bilstein B1 conversion kit also supports upgrades to 37-inch tires by providing the additional clearance needed between the fender and tire. It is engineered to work with Bilstein shock absorbers, helping maintain proper suspension geometry and dependable performance when modifying your light truck for increased capability. This kit is intended for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models.\u003cbr\u003eKit Contents: Includes eight spring seat adapters, four jounce spacers, and a mount parts kit for a complete installation. Part Type: Shock conversion kit. Series: Bilstein B1 (Components). Segment: Light truck. Vehicle Fitment: Designed for 2021-2026 Ford Bronco applications. Professional installation is recommended to ensure correct fitment, suspension setup, and safe operation. This product contains a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Suspension shock absorber conversion kit for 2021-2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Designed for Broncos equipped with Bilstein B8 6112 or 6100 shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Support: Helps restore lift height when additional constant accessory weight is added\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Clearance: Supports 37-inch tire upgrades by increasing fender-to-tire clearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Eight spring seat adapters, four jounce spacers, and a mount parts kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 11-344841\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B1 (Components)\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Segment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nParttype: Shock Conversion Kit\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSeries: B1 (Components)\u003cbr\u003e\nKit Contents: 8 x Spring Seat Adapters, 4 x Jounce Spacers, Mount Parts Kit\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nAaiaid Part Number: BBGL11-344841\u003cbr\u003e\nPart Number: 11-344841\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771769094253,"sku":"11344841","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/11-344841_1.jpg?v=1792228918"},{"product_id":"fabtech-fts22359-coilover-shock-spacer-kit-for-2021-2026-ford-bronco","title":"Fabtech FTS22359 Coilover Shock Spacer Kit for 2021-2026 Ford Bronco","description":"\u003cp\u003eThe Fabtech FTS22359 Coilover Shock Spacer Kit is designed for 2021-2026 Ford Bronco models requiring additional suspension clearance and dependable support. Built for use with compatible Fabtech lift systems, this spacer kit helps optimize coilover positioning while supporting proper suspension function during street driving and off-road use. Its application-specific design makes it a practical upgrade for Bronco owners seeking reliable suspension performance.\u003cbr\u003eFabtech manufactures the FTS22359 with durable materials and a precise fit for straightforward installation with compatible components. The kit is engineered to work as part of a properly configured suspension system, helping maintain consistent shock and spring operation without compromising the vehicle’s intended handling characteristics. It is an appropriate choice for trail vehicles, overland builds, and daily-driven Broncos equipped with Fabtech suspension components.\u003cbr\u003eFor added confidence, this Fabtech shock spacer kit is backed by the brand’s focus on quality, performance, and long-term durability. Verify vehicle configuration, lift height, and suspension compatibility before ordering. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov. The Fabtech FTS22359 is a fitment-specific component for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for compatible 2021-2026 Ford Bronco suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Coilover shock spacer kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS22359\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Intended for use with compatible Fabtech lift and coilover components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Durable components engineered for dependable suspension service\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Designed for a vehicle-specific fit and proper suspension integration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning for cancer and reproductive harm\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22359\u003cbr\u003e\nPart Number: FTS22359\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772167651437,"sku":"FTS22359","price":810.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS22359_UNMOUNTED.jpg?v=1792236491"},{"product_id":"fabtech-fts22343-shock-spacer-kit-for-2021-2024-ford-bronco","title":"Fabtech FTS22343 Shock Spacer Kit for 2021-2026 Ford Bronco","description":"\u003cp\u003eThe Fabtech FTS22343 Shock Spacer Kit is designed for compatible 2021-2024 Ford Bronco applications. Developed by Fabtech, this kit reflects the brand’s extensive experience in aftermarket suspension engineering, combining advanced design software, precision fabrication equipment, and rigorous product testing. It is engineered to support dependable suspension performance for off-road enthusiasts and vehicle owners seeking properly designed replacement or upgrade components.\u003cbr\u003eFabtech focuses on suspension products that deliver consistent fit, function, and durability. The FTS22343 Shock Spacer Kit is manufactured with the company’s commitment to quality and is intended to integrate with the vehicle’s existing suspension system when installed on the specified application. Its application-specific design helps provide reliable functionality while supporting the overall performance of the suspension assembly.\u003cbr\u003eThe Fabtech FTS22343 fits 2021, 2022, 2023, and 2024 Ford Bronco models. Verify vehicle compatibility and installation requirements before purchase. Professional installation is recommended to ensure correct positioning, secure assembly, and proper suspension operation. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for compatible 2021-2024 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Shock spacer kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineering: Developed using Fabtech suspension design and testing processes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFunctionality: Supports proper fit and reliable suspension operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS22343\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22343\u003cbr\u003e\nPart Number: FTS22343\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772171255917,"sku":"FTS22343","price":460.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS22343_SPACER-4DOOR.jpg?v=1792236605"},{"product_id":"fabtech-fts22342-shock-spacer-kit-for-2021-2023-ford-bronco","title":"Fabtech FTS22342 Shock Spacer Kit for 2021-2023 Ford Bronco","description":"\u003cp\u003eUpgrade the suspension setup of your 2021-2023 Ford Bronco with the Fabtech FTS22342 Shock Spacer Kit. Designed by Fabtech, a leading name in aftermarket suspension systems, this kit supports proper shock positioning and helps maintain suspension functionality when used with compatible coilover applications. It is engineered for off-road enthusiasts who demand dependable performance, fitment, and long-term durability from their suspension components.\u003cbr\u003eFabtech draws on more than 20 years of aftermarket suspension design experience to develop products using advanced engineering software, modern fabrication equipment, and rigorous testing procedures. The FTS22342 Shock Spacer Kit reflects that commitment to quality, offering a carefully designed solution for suspension applications where a shock spacer is required. Proper suspension design is essential for achieving reliable operation, and Fabtech products are developed with performance and functionality in mind.\u003cbr\u003eThis Fabtech shock spacer kit is engineered for select 2021, 2022, and 2023 Ford Bronco models. Confirm vehicle compatibility and suspension configuration before installation. The kit is intended for installation by qualified professionals familiar with automotive suspension systems. Fabtech part number FTS22342 provides a dependable replacement or upgrade option for maintaining a properly configured suspension system. California Proposition 65 Warning: Cancer and Reproductive Harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS22342\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Shock spacer kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021-2023 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for compatible coilover suspension setups\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Engineered to support proper shock positioning and suspension functionality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Developed using Fabtech engineering, fabrication, and testing standards\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation is recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22342\u003cbr\u003e\nPart Number: FTS22342\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772171649133,"sku":"FTS22342","price":460.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS22342_FRONT.jpg?v=1792236618"},{"product_id":"fabtech-dirt-logic-2-5-resi-coilover-shock-absorber-fts22341-for-2021-2023-ford-bronco","title":"Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber FTS22341 for 2021-2026 Ford Bronco","description":"Dirt Logic 2.5 Resi Coil Over Shock Absorber\n\u003cp\u003eUpgrade your 2021-2023 Ford Bronco with the Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber, part number FTS22341. Developed from Fabtech’s desert racing experience, this high-performance shock is engineered for aggressive off-road driving and demanding coilover applications. Its advanced design delivers substantial damping capacity to help control suspension movement across rugged terrain, uneven trails, and high-speed off-road conditions.\u003cbr\u003eThe Dirt Logic 2.5 features a remote-reservoir-style performance design and is built to work with the vehicle’s OEM shock stroke. It uses high-quality coil springs and durable construction intended to provide consistent suspension control during demanding use. Whether you are improving your Bronco for trail exploration, desert driving, or recreational off-road performance, this Fabtech shock absorber provides a purpose-built suspension upgrade with the quality expected from the Dirt Logic product line.\u003cbr\u003eThis Fabtech Dirt Logic 2.5 coilover shock absorber is designed for 2021, 2022, and 2023 Ford Bronco applications. Professional installation is recommended to ensure proper fitment, setup, and suspension operation. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFabtech Dirt Logic 2.5 Resi coilover shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number: FTS22341\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for 2021-2023 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDeveloped from Fabtech desert racing technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBuilt for aggressive off-road driving and coilover applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh damping capacity for improved suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOEM shock stroke\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh-quality coil springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nShock Stroke: OEM\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22341\u003cbr\u003e\nPart Number: FTS22341\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772172042349,"sku":"FTS22341","price":1993.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts22341-kit.jpg?v=1792236630"},{"product_id":"fabtech-dirt-logic-2-5-resi-coilover-shock-absorber-fts22340-for-2021-2023-ford-bronco","title":"Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber FTS22340 for 2021-2026 Ford Bronco","description":"Dirt Logic 2.5 Resi Coil Over Shock Absorber\n\u003cp\u003eUpgrade the off-road performance of your 2021-2023 Ford Bronco with the Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber, part number FTS22340. Developed from Fabtech’s desert racing experience, this high-performance shock is engineered for demanding coilover applications and aggressive trail driving. Its advanced reservoir design helps provide increased damping capacity, allowing the suspension to better manage repeated impacts, uneven terrain, and high-speed off-road conditions.\u003cbr\u003eThe Dirt Logic 2.5 combines durable construction with high-quality coil springs for dependable performance in challenging environments. Designed around the factory shock stroke, the FTS22340 supports a controlled suspension response while helping maintain tire contact and vehicle stability over rough surfaces. It is an excellent choice for Bronco owners seeking improved ride control, enhanced off-road capability, and the proven performance associated with Fabtech suspension components.\u003cbr\u003eThis Fabtech coilover shock absorber fits 2021, 2022, and 2023 Ford Bronco applications. Professional installation is recommended to ensure correct setup, spring preload, and suspension alignment. The product includes a California Proposition 65 warning regarding potential exposure to chemicals known to cause cancer and reproductive harm. Visit www.p65warnings.ca.gov for additional information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS22340\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Dirt Logic 2.5 reservoir coilover shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: 2021-2023 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: OEM\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Designed for aggressive off-road driving and demanding coilover applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Increased damping capacity for improved control over rough terrain\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Durable design derived from desert racing development\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoil Springs: High-quality coil springs included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nShock Stroke: OEM\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22340\u003cbr\u003e\nPart Number: FTS22340\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772172435565,"sku":"FTS22340","price":1993.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts22340-kit.jpg?v=1792236643"}],"url":"https:\/\/truckarmy.com\/collections\/ford-bronco-shocks.oembed","provider":"Truck Army","version":"1.0","type":"link"}