{"title":"Light Wiring Kits \u0026 Switches","description":"\u003cp\u003eWiring harnesses and switches to power your lights safely.\u003c\/p\u003e","products":[{"product_id":"kc-hilites-profile-sidecast-four-light-wiring-kit-for-2005-2023-toyota-tacoma-double-cab-part-92403","title":"KC HiLiTES Profile SideCast Four-Light Wiring Kit for 2005-2023 Toyota Tacoma Double Cab, Part 92403","description":"KC Profile SideCast Four-Light Wiring Kit - 2005-2023 Toyota Tacoma Double Cab\n\u003cp\u003eThe KC HiLiTES Profile SideCast Four-Light Wiring Kit, part number 92403, provides a vehicle-specific wiring solution for integrating four Profile 10-inch SideCast lights with a Platform One roof rack. Designed for 2005-2023 Toyota Tacoma Double Cab models, including second-generation and third-generation applications, this kit helps simplify installation and organize the side-light wiring for a clean, dependable setup.\u003cbr\u003eThe kit includes one vehicle-specific side-light wiring harness designed for four KC HiLiTES Profile SideCast lights. It is intended for roof rack mounting and includes the installation hardware needed to connect the lighting system. The black finish complements the rack and lighting components while supporting a neat, low-profile installation. Its IP68 rating helps protect the harness against dust and water exposure in demanding outdoor and off-road conditions.\u003cbr\u003eBuilt specifically for the Toyota Tacoma Double Cab, the KC HiLiTES 92403 wiring kit helps reduce installation complexity compared with assembling a universal wiring solution. It is a practical choice for drivers upgrading Platform One rack lighting and seeking a streamlined connection for four side-mounted lights. Verify vehicle year, cab configuration, roof rack compatibility, and lighting configuration before installation. This product carries a California Proposition 65 warning regarding cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle-specific wiring harness for four KC HiLiTES Profile SideCast lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with 2005-2023 Toyota Tacoma Double Cab models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for use with Platform One roof racks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes installation hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIP68-rated protection against dust and water exposure\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRoof rack mounting application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKC HiLiTES part number 92403\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nIncluded In Box: (1) Vehicle-Specific Side Light Wiring Harness for four Profile SideCast™ Lights\u003cbr\u003e\nColor: Black\u003cbr\u003e\nIncludes Installation Hardware: Yes\u003cbr\u003e\nIp Rating: ip68\u003cbr\u003e\nMount Location: Roof Rack\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nTitle: KC HiLiTES Profile SideCast Four-Light Wiring Kit 05-23 Toyota Tacoma Double Cab - 92403\u003cbr\u003e\nProp 65 (C, R Or Cr): CR\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65 Warning Label: Warning - Both Cancer and Reproduction.JPG\u003cbr\u003e\nAaiaid Part Number: BFHB92403\u003cbr\u003e\nPart Number: 92403\u003cbr\u003e\nBrand Aaia: BFHB\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013\u003cbr\u003e\nToyota Tacoma  2014\u003cbr\u003e\nToyota Tacoma  2015\u003cbr\u003e\nToyota Tacoma  2016\u003cbr\u003e\nToyota Tacoma  2017\u003cbr\u003e\nToyota Tacoma  2018\u003cbr\u003e\nToyota Tacoma  2019\u003cbr\u003e\nToyota Tacoma  2020\u003cbr\u003e\nToyota Tacoma  2021\u003cbr\u003e\nToyota Tacoma  2022\u003cbr\u003e\nToyota Tacoma  2023","brand":"KC HiLiTES","offers":[{"title":"Default Title","offer_id":67770510147693,"sku":"92403","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/Wire-Harness-for-PL1-Vehicle-Specific.jpg?v=1792212712"},{"product_id":"kc-hilites-profile-sidecast-four-light-wiring-kit-for-platform-one-roof-rack-part-92402","title":"KC HiLiTES Profile SideCast Four-Light Wiring Kit for Platform One Roof Rack, Part 92402","description":"KC Profile SideCast 4-Lt Wrng Kt Pltfrm One - 15+ Ford F-150\/14+ Ford Super Duty\n\u003cp\u003eIntegrate four KC HiLiTES Profile 10-inch SideCast lights with your Platform One roof rack using the vehicle-specific Profile SideCast Four-Light Wiring Kit, Part 92402. This complete wiring solution is designed for a clean, reliable installation on select Ford F-150, Raptor, and Super Duty SuperCrew cab trucks.\u003c\/p\u003e\n\u003cp\u003eThe wiring harness routes discreetly through KC HiLiTES hidden wire channels, helping protect the wiring while maintaining a neat appearance. Its plug-and-play design simplifies installation and provides a dependable connection between the rack-mounted lighting and the vehicle electrical system. The kit is intended for roof rack side-light applications and includes the required installation hardware.\u003c\/p\u003e\n\u003cp\u003eFinished in black, the harness complements the Platform One rack and is built for demanding outdoor use. With an IP68 rating, it offers strong protection against dust and water intrusion when properly installed. The kit includes one vehicle-specific side-light wiring harness for four Profile SideCast lights, making it a practical solution for adding integrated side illumination to an adventure, work, or off-road vehicle.\u003c\/p\u003e\n\u003cp\u003eCompatibility includes select 2015 and newer Ford F-150 models, 2017 and newer Ford Raptor models, and 2017 and newer Ford Super Duty SuperCrew cab trucks. Always verify vehicle and Platform One rack compatibility before installation. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.p65warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVehicle-specific wiring harness for four KC HiLiTES Profile 10-inch SideCast lights\u003c\/li\u003e\n\u003cli\u003eDesigned for KC HiLiTES Platform One roof rack side-light installations\u003c\/li\u003e\n\u003cli\u003eCompatible with select 2015 and newer Ford F-150 models\u003c\/li\u003e\n\u003cli\u003eCompatible with select 2017 and newer Ford Raptor and Ford Super Duty SuperCrew cab models\u003c\/li\u003e\n\u003cli\u003eDiscreet routing through KC HiLiTES hidden wire channels\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design for a clean, streamlined installation\u003c\/li\u003e\n\u003cli\u003eBlack finish\u003c\/li\u003e\n\u003cli\u003eIP68-rated protection against dust and water intrusion\u003c\/li\u003e\n\u003cli\u003eIncludes installation hardware\u003c\/li\u003e\n\u003cli\u003eMount location: Roof rack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nIncluded In Box: (1) Vehicle-Specific Side Light Wiring Harness for four Profile SideCast™ Lights\u003cbr\u003e\nColor: Black\u003cbr\u003e\nIncludes Installation Hardware: Yes\u003cbr\u003e\nIp Rating: ip68\u003cbr\u003e\nMount Location: Roof Rack\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nTitle: KC HiLiTES Profile SideCast Four-Light Wiring Kit Platform One F150\/Raptor\/Super Duty - 92402\u003cbr\u003e\nProp 65 (C, R Or Cr): CR\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65 Warning Label: Warning - Both Cancer and Reproduction.JPG\u003cbr\u003e\nAaiaid Part Number: BFHB92402\u003cbr\u003e\nPart Number: 92402\u003cbr\u003e\nBrand Aaia: BFHB\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-250 Super Duty  1999\u003cbr\u003e\nFord F-250 Super Duty  2000\u003cbr\u003e\nFord F-250 Super Duty  2001\u003cbr\u003e\nFord F-250 Super Duty  2002\u003cbr\u003e\nFord F-250 Super Duty  2003\u003cbr\u003e\nFord F-250 Super Duty  2004\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-250 Super Duty  2009\u003cbr\u003e\nFord F-250 Super Duty  2010\u003cbr\u003e\nFord F-250 Super Duty  2011\u003cbr\u003e\nFord F-250 Super Duty  2012\u003cbr\u003e\nFord F-250 Super Duty  2013\u003cbr\u003e\nFord F-250 Super Duty  2014\u003cbr\u003e\nFord F-250 Super Duty  2015\u003cbr\u003e\nFord F-250 Super Duty  2016\u003cbr\u003e\nFord F-250 Super Duty  2017\u003cbr\u003e\nFord F-250 Super Duty  2018\u003cbr\u003e\nFord F-250 Super Duty  2019\u003cbr\u003e\nFord F-250 Super Duty  2020\u003cbr\u003e\nFord F-250 Super Duty  2021\u003cbr\u003e\nFord F-250 Super Duty  2022\u003cbr\u003e\nFord F-250 Super Duty  2023\u003cbr\u003e\nFord F-250 Super Duty  2024\u003cbr\u003e\nFord F-250 Super Duty  2025\u003cbr\u003e\nFord F-350 Super Duty  1999\u003cbr\u003e\nFord F-350 Super Duty  2000\u003cbr\u003e\nFord F-350 Super Duty  2001\u003cbr\u003e\nFord F-350 Super Duty  2002\u003cbr\u003e\nFord F-350 Super Duty  2003\u003cbr\u003e\nFord F-350 Super Duty  2004\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2009\u003cbr\u003e\nFord F-350 Super Duty  2010\u003cbr\u003e\nFord F-350 Super Duty  2011\u003cbr\u003e\nFord F-350 Super Duty  2012\u003cbr\u003e\nFord F-350 Super Duty  2013\u003cbr\u003e\nFord F-350 Super Duty  2014\u003cbr\u003e\nFord F-350 Super Duty  2015\u003cbr\u003e\nFord F-350 Super Duty  2016\u003cbr\u003e\nFord F-350 Super Duty  2017\u003cbr\u003e\nFord F-350 Super Duty  2018\u003cbr\u003e\nFord F-350 Super Duty  2019\u003cbr\u003e\nFord F-350 Super Duty  2020\u003cbr\u003e\nFord F-350 Super Duty  2021\u003cbr\u003e\nFord F-350 Super Duty  2022\u003cbr\u003e\nFord F-350 Super Duty  2023\u003cbr\u003e\nFord F-350 Super Duty  2024\u003cbr\u003e\nFord F-350 Super Duty  2025","brand":"KC HiLiTES","offers":[{"title":"Default Title","offer_id":67770512638061,"sku":"92402","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/Wire-Harness-for-PL1-Vehicle-Specific_2133a2bb-5bdb-404c-9544-d57b890f386a.jpg?v=1792212725"},{"product_id":"kc-hilites-slimlite-8-inch-led-wiring-harness-with-switch-part-number-6321","title":"KC HiLiTES SlimLite 8-Inch LED Wiring Harness with Switch 6321","description":"SlimLite 8\" LED - Wiring Harness with Switch\n\u003cp\u003ePower and control your KC HiLiTES SlimLite 8-inch LED lights with the SlimLite LED Wiring Harness with Switch, Part Number 6321. Designed to operate two SlimLite LED lights simultaneously, this harness provides a convenient wiring solution for auxiliary lighting installations on trucks, SUVs, off-road vehicles, and other compatible applications. The integrated switch allows quick and easy control of the connected lights from inside the vehicle or another accessible mounting location.\u003cbr\u003eThe KC HiLiTES wiring harness is designed to simplify installation by providing a dedicated connection between the vehicle electrical system, lighting equipment, and control switch. It is a practical choice for replacing a worn harness or completing a new SlimLite lighting setup while helping keep wiring organized and accessible. Verify vehicle compatibility and installation requirements before use, and follow all applicable electrical safety practices during installation.\u003cbr\u003eThis harness is intended for use with compatible KC HiLiTES SlimLite 8-inch LED lights and is not identified as SAE\/ECE or DOT compliant. The product carries a California Proposition 65 warning. With its dual-light power capability and integrated switch, the KC HiLiTES Part Number 6321 harness is a straightforward accessory for managing two compatible LED lights in a variety of automotive and off-road lighting applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDual Light Power: Powers two compatible KC HiLiTES SlimLite 8-inch LED lights simultaneously.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntegrated Switch: Provides convenient on\/off control for connected LED lights.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for use with compatible KC HiLiTES SlimLite 8-inch LED lighting systems.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: KC HiLiTES\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 6321\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompliance: Not SAE\/ECE compliant and not DOT compliant.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: This product carries a Proposition 65 warning.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: SlimLite 8 In. LED - Wiring Harness with Switch\u003cbr\u003e\nSae\/Ece Compliant: No\u003cbr\u003e\nDot Compliant: No\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nAaiaid Part Number: BFHB6321\u003cbr\u003e\nPart Number: 6321\u003cbr\u003e\nBrand Aaia: BFHB","brand":"KC HiLiTES","offers":[{"title":"Default Title","offer_id":67770623066221,"sku":"6321","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/6321_Small_Parts_1.jpg?v=1792213197"},{"product_id":"kc-hilites-wiring-harness-with-40-amp-relay-and-led-rocker-switch-part-6315","title":"KC HiLiTES Wiring Harness with 40 Amp Relay and LED Rocker Switch, Part 6315","description":"KC Wire Harness 40A Relay And Rocker Switch\n\u003cp\u003eThe KC HiLiTES Wiring Harness with 40 Amp Relay and LED Rocker Switch, Part 6315, provides a dependable way to control auxiliary lighting and other compatible 12-volt accessories. This preassembled harness combines a heavy-duty relay, illuminated rocker switch, and connecting wiring in one convenient kit, helping simplify installation and reduce the need to source individual electrical components.\u003cbr\u003eThe integrated 40-amp relay is designed to handle higher-current accessory loads while allowing the rocker switch to operate the circuit with a lower-current signal. The LED rocker switch provides a clear visual indication when the connected accessory is powered, making it easier to monitor operation from the driver’s seat or an accessible switch panel. The harness is well suited for off-road vehicles, trucks, utility vehicles, and custom automotive applications where reliable accessory control is required.\u003cbr\u003eInstallation is streamlined with a ready-to-use wiring layout that helps connect compatible lights or equipment to a fused power source, ground, and the selected accessory. Use the KC HiLiTES Part 6315 harness with applications that match the relay, switch, wiring, and electrical requirements. Verify circuit capacity and follow the accessory manufacturer’s installation instructions before use. This wiring harness is intended to support a clean, organized installation while helping protect the accessory circuit through proper relay-based switching.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e40-amp relay: Supports control of compatible higher-current auxiliary lighting and 12-volt accessories.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLED rocker switch: Provides illuminated on\/off operation and visible circuit status.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReady-to-use harness: Combines the relay, switch, and wiring to simplify accessory installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVersatile application: Suitable for off-road vehicles, trucks, utility vehicles, and custom automotive projects.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKC HiLiTES quality: Designed as Part 6315 for dependable auxiliary accessory control.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTitle: KC Hilites Wiring Harness with 40 Amp Relay and LED Rocker Switch\u003cbr\u003e\nAaiaid Part Number: BFHB6315\u003cbr\u003e\nPart Number: 6315\u003cbr\u003e\nBrand Aaia: BFHB","brand":"KC HiLiTES","offers":[{"title":"Default Title","offer_id":67770624508013,"sku":"6315","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/6315_Small_Parts_1.jpg?v=1792213207"},{"product_id":"kc-hilites-wiring-harness-for-2-lights-with-2-pin-deutsch-connectors-part-6308","title":"KC HiLiTES Wiring Harness for 2 Lights with 2-Pin Deutsch Connectors, Part 6308","description":"KC Wire Harness For 2-Light DT Connector\n\u003cp\u003eThe KC HiLiTES Wiring Harness, Part 6308, provides a dependable connection for operating two auxiliary lights equipped with 2-pin Deutsch connectors. Designed for a clean and efficient installation, this harness helps simplify light wiring while supporting a professional, organized setup for off-road vehicles, trucks, SUVs, and other applications using compatible KC HiLiTES lighting equipment.\u003cbr\u003eThe harness is built around a 2-light configuration and includes connectors designed to mate with compatible 2-pin Deutsch-style light connections. Its straightforward design helps reduce installation complexity compared with assembling individual wiring components, making it a practical choice for replacement installations, new lighting projects, or restoring an existing KC HiLiTES system. Verify connector compatibility and vehicle wiring requirements before installation.\u003cbr\u003eKC HiLiTES Part 6308 is suitable for enthusiasts, installers, and technicians who need a purpose-built wiring solution for two lights. The harness supports reliable power distribution when properly installed with the appropriate vehicle circuit protection and grounding. Follow all applicable installation instructions and confirm that the lighting system, switches, relays, and power source are correctly matched before use. This product is not identified as requiring a California Proposition 65 warning.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: KC HiLiTES\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 6308\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Wiring harness for two auxiliary lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConnector Type: 2-pin Deutsch connectors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConfiguration: Designed to connect two compatible lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Helps simplify and organize auxiliary light wiring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Intended for use with compatible KC HiLiTES lighting systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProp 65: No warning required\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTitle: KC Hilites Wiring Harness - for 2 Lights with 2-Pin Deutsch Connectors\u003cbr\u003e\nAaiaid Part Number: BFHB6308\u003cbr\u003e\nPart Number: 6308\u003cbr\u003e\nBrand Aaia: BFHB","brand":"KC HiLiTES","offers":[{"title":"Default Title","offer_id":67770631979117,"sku":"6308","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/6308_Small_Parts_1.jpg?v=1792213218"},{"product_id":"kc-hilites-universal-wire-hider-25m-bulk-part-number-63001","title":"KC HiLiTES Universal Wire Hider 25M Bulk 63001","description":"KC Universal Wire Hider - 25M Bulk\n\u003cp\u003eProtect and organize exposed wiring with the KC HiLiTES Universal Wire Hider, Part Number 63001. Designed for clean, professional-looking installations, this flexible wire management solution helps conceal and shield cables routed through automotive, powersports, off-road, marine, and custom electrical applications. The bulk 25-meter roll provides ample material for larger projects, multiple vehicles, or workshop inventory.\u003cbr\u003eThe Universal Wire Hider helps reduce wire clutter while offering a practical barrier against abrasion, dirt, and everyday environmental exposure. Its versatile design can be used to bundle and route wiring along vehicle interiors, engine compartments, chassis areas, dashboards, and accessory installations. Use it with lighting systems, auxiliary switches, communication equipment, and other aftermarket electrical components where a neat and protected wire path is important.\u003cbr\u003eKC HiLiTES is known for dependable off-road lighting and electrical accessories built for demanding installations. This wire hider complements that product range by making wiring easier to manage and improving the finished appearance of custom builds. The flexible construction supports clean routing around common curves and installation points, while the generous bulk length helps minimize waste and the need for multiple short sections. Part Number 63001 is a practical choice for installers, fabricators, technicians, and enthusiasts who want reliable wire organization from a recognized automotive accessory brand.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: KC HiLiTES\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 63001\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Universal wire hider\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBulk Length: 25 meters\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Organizes and conceals wiring in automotive, off-road, powersports, marine, and custom installations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtection: Helps shield routed wires from abrasion, dirt, and everyday environmental exposure\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Flexible design supports clean routing around curves and common mounting areas\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUse: Suitable for lighting, accessory, communication, and aftermarket electrical wiring projects\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Universal Wire Hider - 25M Bulk\u003cbr\u003e\nAaiaid Part Number: BFHB63001\u003cbr\u003e\nPart Number: 63001\u003cbr\u003e\nBrand Aaia: BFHB","brand":"KC HiLiTES","offers":[{"title":"Default Title","offer_id":67770632208493,"sku":"63001","price":274.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/63001_Small_Parts_1.jpg?v=1792213224"},{"product_id":"rigid-industries-40200-radiance-3-wire-multi-trigger-harness","title":"RIGID Industries 40200 Radiance 3-Wire Multi-Trigger Harness","description":"Wire Harness, 3 Wire, Fits Radiance And Radiance Curved\n\u003cp\u003eThe RIGID Industries 40200 Radiance 3-wire multi-trigger harness is designed for a clean, dependable installation of compatible RIGID Radiance and Radiance Curved LED light bars. This dedicated wiring solution supports light bars in the 10- to 50-inch Radiance series and 10- to 54-inch Radiance Curved series, helping simplify control of both primary lighting and backlighting functions.\u003cbr\u003eThe harness features two independent circuits for flexible operation. Circuit one is built for higher amperage and uses a relay to power the primary LEDs on the light bar. Circuit two is designed for low-amperage backlighting and operates without a relay. Each circuit can be controlled independently, allowing you to activate the main light output and accent backlighting according to your setup and preferences.\u003cbr\u003eIncluded backlit rocker switches provide convenient in-cab control and easy circuit identification. The harness comes with one red switch and one blue switch, giving each lighting function a distinct control. With its application-specific design, the RIGID Industries 40200 harness helps reduce installation complexity while providing a practical wiring solution for Radiance-series LED light bars.\u003cbr\u003eThis kit includes the wire harness and switches needed to connect compatible RIGID Radiance lighting systems. Verify your light bar series and application before installation to ensure compatibility. The RIGID 40200 is a suitable choice for users seeking independent control, relay-supported primary lighting, and dedicated backlighting control in one harness assembly.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCompatibility: Fits RIGID Radiance LED light bars from 10 to 50 inches and Radiance Curved LED light bars from 10 to 54 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIndependent Circuits: Provides separate circuits for primary LEDs and low-amperage backlighting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRelay-Supported Power: Uses a relay on the higher-amperage circuit for the primary LED lighting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBacklighting Control: Includes a dedicated low-amperage circuit without a relay\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRocker Switches: Includes separate red and blue backlit LED rocker switches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Designed specifically for RIGID Radiance-series light bar applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePackage Contents: Includes wire harness and switches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: RIGID Industries 40200\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdd On: 1063, 1067, 1031, 30130, 30140, 30150\u003cbr\u003e\nAsin: No\u003cbr\u003e\nProduct Family: Accessories\u003cbr\u003e\nProduct Weight: 1\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTest Series: 10-50 Inch Radiance and 10-54 Inch Radiance Curved\u003cbr\u003e\nTitle: RIGID Wire Harness, 3 Wire, Fits Radiance And Radiance Curved\u003cbr\u003e\nWhat's In The Package: Wire Harness, Switch\u003cbr\u003e\nAaiaid Part Number: FLWB40200\u003cbr\u003e\nPart Number: 40200\u003cbr\u003e\nBrand Aaia: FLWB","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":67770866040941,"sku":"40200","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/40200-Radiance_Wiring_Harness.jpg?v=1792214173"},{"product_id":"rigid-industries-wire-harness-40195-for-d-series-and-sr-q-series-led-light-pairs","title":"RIGID Industries Wire Harness 40195 for D-Series and SR-Q Series LED Light Pairs","description":"Wire Harness, Fits D-Series Pair And SR-Q Series Pair With 4 LEDs\n\u003cp\u003eThe RIGID Industries Wire Harness 40195 is designed to simplify installation of a pair of D-Series PRO or SR-Q Series PRO LED lights on a 12-volt electrical system. This complete wiring solution helps connect compatible auxiliary lighting to your vehicle while providing convenient switching and circuit protection. It is engineered for use with D-Series and SR-Q Series pairs equipped with Spot, Flood, or Flood Diffused optics.\u003cbr\u003eThe harness includes battery terminals for direct connection to the vehicle’s power supply and Deutsch connectors for a secure connection to the LED lights. An inline fuse holder helps protect the circuit, while the included waterproof switch provides reliable control in demanding outdoor, off-road, and automotive environments. The approximately 14-foot harness length supports flexible routing across a variety of vehicle installations.\u003cbr\u003eDesigned and engineered by RIGID Industries, this accessory is a practical choice for adding compatible LED lighting without creating a custom wiring setup. The harness is intended for use with RIGID D-Series PRO Pair and SR-Q Series PRO Pair lights and includes the wiring harness and switch needed for installation. Verify light series and connector compatibility before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCompatibility: Designed for RIGID D-Series PRO Pair and SR-Q Series PRO Pair LED lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptics Support: Compatible with Spot, Flood, and Flood Diffused optics\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eElectrical System: Connects compatible lighting to a 12-volt vehicle electrical system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConnectors: Includes battery terminals and Deutsch connectors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCircuit Protection: Features an inline fuse holder\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch: Includes a waterproof on\/off switch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHarness Length: Approximately 14 feet for flexible installation routing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded Components: Wiring harness and switch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineering: Designed and engineered by RIGID Industries\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdd On: 1063, 1067, 1031, 30130, 30140, 30150\u003cbr\u003e\nAsin: No\u003cbr\u003e\nProduct Family: Accessories\u003cbr\u003e\nProduct Weight: 1\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTest Series: D-Series Pair, SR-Q Series Pair Spot Or Flood Optics\u003cbr\u003e\nTitle: RIGID Wire Harness, Fits D-Series Pair And SR-Q Series Pair With 4 LEDs\u003cbr\u003e\nWhat's In The Package: Wire Harness, Switch\u003cbr\u003e\nAaiaid Part Number: FLWB40195\u003cbr\u003e\nPart Number: 40195\u003cbr\u003e\nBrand Aaia: FLWB","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":67770866958445,"sku":"40195","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/40194.jpg?v=1792214179"},{"product_id":"rigid-industries-40193-wire-harness-for-20-50-inch-sr-series-and-10-30-inch-e-series-led-light-bars","title":"RIGID Industries 40193 Wire Harness for 20–50-Inch SR-Series and 10–30-Inch E-Series LED Light Bars","description":"Wire Harness, Fits 20-50 Inch SR-Series And 10-30 Inch E-Series\n\u003cp\u003eThe RIGID Industries 40193 Wire Harness provides a reliable connection between a single compatible LED light bar and a 12V electrical system. Designed for select 20–50-inch SR-Series PRO and 10–30-inch E-Series PRO light bars, this harness simplifies installation by combining the essential wiring and controls into one organized assembly. It is engineered by RIGID for dependable performance in automotive, truck, off-road, and utility applications.\u003cbr\u003eThis approximately 11-foot harness includes battery terminals for direct connection to the vehicle’s power supply and a Deutsch connector for attaching to the compatible light. An inline fuse holder helps protect the circuit, while the integrated 12V relay supports consistent power delivery. The included waterproof switch provides convenient control from inside the vehicle cabin or another protected mounting location.\u003cbr\u003eThe RIGID 40193 harness is a practical add-on for installations that require a clean, functional wiring solution without sourcing individual electrical components separately. Its configuration is intended for single-light-bar applications and is compatible with select RIGID SR-Series PRO and E-Series PRO models within the specified size ranges. Verify light-bar compatibility and vehicle electrical requirements before installation. Professional installation is recommended for safe routing, secure connections, and proper fuse protection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e11-foot wiring harness designed to connect one compatible LED light bar to a 12V electrical system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with 20–50-inch RIGID SR-Series PRO and 10–30-inch RIGID E-Series PRO light bars\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBattery terminals provide a direct connection to the vehicle power supply\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDeutsch connector is designed for connection to the compatible RIGID light\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntegrated inline fuse holder helps protect the electrical circuit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e12V relay supports consistent power delivery to the light bar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWaterproof switch provides convenient on\/off control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned and engineered by RIGID Industries\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes wire harness and switch\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdd On: 1063, 1067, 1031, 30130, 30140, 30150\u003cbr\u003e\nAsin: No\u003cbr\u003e\nProduct Family: Accessories\u003cbr\u003e\nProduct Weight: 1\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTest Series: 20-50 Inch SR-Series And 10-30 Inch E-Series\u003cbr\u003e\nTitle: RIGID Wire Harness, Fits 20-50 Inch SR-Series And 10-30 Inch E-Series\u003cbr\u003e\nWhat's In The Package: Wire Harness, Switch\u003cbr\u003e\nAaiaid Part Number: FLWB40193\u003cbr\u003e\nPart Number: 40193\u003cbr\u003e\nBrand Aaia: FLWB","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":67770868236397,"sku":"40193","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/40193.jpg?v=1792214185"},{"product_id":"rigid-industries-40192-wire-harness-for-sr-m-and-sr-q-series-backup-kits","title":"RIGID Industries 40192 Wire Harness for SR-M and SR-Q Series Backup Kits","description":"Wire Harness, Fits SR-M And SR-Q Series Back Up Kits\n\u003cp\u003eThe RIGID Industries 40192 Wire Harness is designed for use with SR-M and SR-Q Series Backup Kits, providing a reliable connection and convenient control for compatible RIGID LED lighting systems. This harness is engineered by RIGID to support clean, practical installation in applications that require reverse-activated lighting.\u003cbr\u003eThe integrated three-position switch offers On, Off, and Auto settings. In Auto mode, the connected lights activate when the vehicle is placed in reverse, while the On and Off settings provide manual control when needed. This functionality makes the harness suitable for backup lighting setups where dependable operation and flexible switching are important.\u003cbr\u003eThe RIGID 40192 harness is supplied with the wire harness and switch needed for installation with compatible SR-M and SR-Q Series Backup Kits. Its extended cable length helps provide routing flexibility between the lighting equipment, switch, and vehicle wiring. Verify kit compatibility and installation requirements before ordering to ensure proper fit and operation.\u003cbr\u003eBuilt for use with RIGID Industries lighting accessories, this harness offers a straightforward solution for connecting and controlling compatible backup lights. The RIGID brand and part number 40192 provide dependable identification when replacing an existing harness or completing a new SR-M or SR-Q Series installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCompatibility: Fits RIGID SR-M and SR-Q Series Backup Kits\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCable Length: 33 feet for flexible routing during installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch Positions: On, Off, and Auto when in reverse\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eControl Function: Enables automatic light activation when the vehicle is placed in reverse\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded Components: Wire harness and switch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineering: Designed and engineered by RIGID Industries\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdd On: 1063, 1067, 1031, 30130, 30140, 30150\u003cbr\u003e\nAsin: No\u003cbr\u003e\nProduct Family: Accessories\u003cbr\u003e\nProduct Weight: 1\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTest Series: SR-M And SR-Q Series Back Up Kits\u003cbr\u003e\nTitle: RIGID Wire Harness, Fits SR-M And SR-Q Series Back Up Kits\u003cbr\u003e\nWhat's In The Package: Wire Harness, Switch\u003cbr\u003e\nAaiaid Part Number: FLWB40192\u003cbr\u003e\nPart Number: 40192\u003cbr\u003e\nBrand Aaia: FLWB","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":67770868596845,"sku":"40192","price":133.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/40192---Back_Up_Light_Wire_Harness.jpg?v=1792214191"},{"product_id":"rigid-industries-40191-red-2-position-on-off-rocker-switch","title":"RIGID Industries 40191 Red 2-Position On\/Off Rocker Switch","description":"2 Position (On\/Off) Rocker Switch, Red, Single\n\u003cp\u003eUpgrade your lighting controls with the RIGID Industries 40191 2-Position On\/Off Rocker Switch. Designed for straightforward operation, this red single rocker switch provides a convenient way to turn compatible lighting systems on or off from the vehicle cabin or control panel. Its illuminated rocker design makes the switch easier to identify and operate in low-light conditions.\u003cbr\u003eThe RIGID 40191 rocker switch includes a protective rubber boot that helps shield the control from water, dust, and everyday environmental exposure. Built for universal-fit applications, it is compatible with all RIGID wiring harnesses and integrates easily into a variety of off-road, utility, and auxiliary lighting installations. The switch requires a 3\/4-inch mounting hole and is intended for clean, secure panel installation.\u003cbr\u003eThis accessory is a practical choice for adding dedicated switching control to a RIGID lighting system. The package includes one red rocker switch, making it suitable for replacement installations or new wiring harness setups. With its simple two-position design, illuminated face, and protective construction, the RIGID Industries 40191 delivers dependable control for compatible auxiliary lighting applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2-Position On\/Off Control: Provides simple, direct switching for compatible RIGID lighting systems.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIlluminated Red Rocker: Helps make the switch easy to locate and operate in low-light conditions.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtective Rubber Boot: Helps resist water and dust exposure during demanding vehicle and outdoor use.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRIGID Wiring Harness Compatible: Designed to fit all RIGID wiring harnesses.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniversal-Fit Application: Suitable for a range of off-road, utility, and auxiliary lighting installations.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePanel Mount Installation: Requires a 3\/4-inch mounting hole for installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePackage Contents: Includes one RIGID Industries 40191 rocker switch.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdd On: 1063, 1067, 1031, 30130, 30140, 30150\u003cbr\u003e\nAsin: No\u003cbr\u003e\nProduct Family: Accessories\u003cbr\u003e\nProduct Weight: 0.5\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTest Series: Universal Fit\u003cbr\u003e\nTitle: RIGID 2 Position (On\/Off) Rocker Switch, Red, Single\u003cbr\u003e\nWhat's In The Package: 1 Switch\u003cbr\u003e\nAaiaid Part Number: FLWB40191\u003cbr\u003e\nPart Number: 40191\u003cbr\u003e\nBrand Aaia: FLWB","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":67770868793453,"sku":"40191","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/40191_lighted_rocker_switch-1_med.jpg?v=1792214197"},{"product_id":"rigid-industries-40190-wire-harness-for-e-series-pro-and-rds-series-pro-led-light-bars","title":"RIGID Industries 40190 Wire Harness for E-Series PRO and RDS-Series PRO LED Light Bars","description":"Wire Harness, Fits E-Series 40-50 Inch And RDS-Series 20-54 Inch\n\u003cp\u003eThe RIGID Industries 40190 Wire Harness provides a reliable, organized way to connect a single LED light bar to a 12V electrical system. Designed for select RIGID E-Series PRO and RDS-Series PRO light bars, this complete harness simplifies installation while helping protect the vehicle’s electrical components. Its 13-foot cable length provides flexible routing for a variety of vehicle applications.\u003cbr\u003eThe harness includes battery terminals for a secure power connection and a Deutsch connector for direct connection to the compatible light bar. An inline fuse holder helps protect the circuit, while the integrated 12V relay supports dependable light operation. A waterproof switch is also included, giving the driver convenient control from inside the cab or another protected location.\u003cbr\u003eDesigned and engineered by RIGID, the 40190 harness is compatible with 40- to 50-inch E-Series PRO LED light bars and 20- to 54-inch RDS-Series PRO LED light bars. It is supplied as a practical accessory package containing the wire harness and switch, making it a suitable choice for new installations, replacement wiring, or upgrades to an existing RIGID lighting setup. Verify light bar compatibility and vehicle electrical requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e13-foot wiring harness for connecting one LED light bar to a 12V electrical system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with RIGID E-Series PRO light bars from 40 to 50 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with RIGID RDS-Series PRO light bars from 20 to 54 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBattery terminals provide a direct connection to the vehicle power supply\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDeutsch connector connects to the compatible RIGID LED light bar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInline fuse holder helps protect the electrical circuit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e12V relay supports reliable light bar operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWaterproof switch provides convenient control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned and engineered by RIGID Industries\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes wire harness and switch\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdd On: 1063, 1067, 1031, 30130, 30140, 30150\u003cbr\u003e\nAsin: No\u003cbr\u003e\nProduct Family: Accessories\u003cbr\u003e\nProduct Weight: 1\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTest Series: E-Series 40-50 Inch, RDS-Series 20-54 Inch\u003cbr\u003e\nTitle: RIGID Wire Harness, Fits E-Series 40-50 Inch And RDS-Series 20-54 Inch\u003cbr\u003e\nWhat's In The Package: Wire Harness, Switch\u003cbr\u003e\nAaiaid Part Number: FLWB40190\u003cbr\u003e\nPart Number: 40190\u003cbr\u003e\nBrand Aaia: FLWB","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":67770869284973,"sku":"40190","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/40190_20HiPo_20Harness_20for_2040_5020Bar.jpg?v=1792214202"},{"product_id":"rigid-industries-40181-3-position-rocker-switch-with-red-backlight","title":"RIGID Industries 40181 3-Position Rocker Switch with Red Backlight","description":"3 Position Rocker Switch (On\/Off\/Backlight), Red, Single\n\u003cp\u003eUpgrade your lighting controls with the RIGID Industries 40181 3-position rocker switch. Designed for RIGID lighting systems, this red single switch provides convenient On, Off, and automatic reverse-lighting functions in a compact, easy-to-use design. The illuminated cherry-style rocker helps make switch operation easier to identify, while the protective rubber boot adds durability for demanding vehicle environments.\u003cbr\u003eThe RIGID Industries 40181 switch is designed for universal-fit applications and requires a 3\/4-inch mounting hole. Its three-position operation allows drivers to control compatible lighting manually or configure the system to activate automatically when the vehicle is in reverse. This makes it a practical control solution for off-road vehicles, work trucks, utility vehicles, and other applications requiring dependable auxiliary lighting control.\u003cbr\u003eInstallation is straightforward for compatible RIGID lighting setups, and the protective boot helps shield the switch from common environmental exposure. The package includes one switch. Compatible RIGID add-on components include part numbers 1063, 1067, 1031, 30130, 30140, and 30150. Choose the RIGID Industries 40181 when you need a durable, illuminated rocker switch for flexible control of your auxiliary lighting system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThree-position operation: Provides On, Off, and automatic reverse-lighting control.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRed backlight: Illuminated rocker improves switch visibility and operation.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtective rubber boot: Helps protect the switch in demanding vehicle environments.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniversal-fit design: Suitable for compatible RIGID lighting and auxiliary vehicle applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting requirement: Installs through a 3\/4-inch hole.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePackage contents: Includes one RIGID Industries 40181 rocker switch.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdd On: 1063, 1067, 1031, 30130, 30140, 30150\u003cbr\u003e\nAsin: No\u003cbr\u003e\nProduct Family: Accessories\u003cbr\u003e\nProduct Weight: 1\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTest Series: Universal Fit\u003cbr\u003e\nTitle: RIGID 3 Position Rocker Switch (On\/Off\/Backlight), Red, Single\u003cbr\u003e\nWhat's In The Package: 1 Switch\u003cbr\u003e\nAaiaid Part Number: FLWB40181\u003cbr\u003e\nPart Number: 40181\u003cbr\u003e\nBrand Aaia: FLWB","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":67770869743725,"sku":"40181","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/40181_3_Position_Rocker_Switch.jpg?v=1792214229"},{"product_id":"rigid-industries-40052-pendant-switch-kit-single","title":"RIGID Industries 40052 Pendant Switch Kit, Single","description":"\u003cp\u003eThe RIGID Industries 40052 Pendant Switch Kit provides a convenient way to control compatible lighting without drilling a hole in your vehicle. Designed for powersports and other universal-fit applications, this pendant-style switch can be mounted where it is easy to reach while keeping your vehicle’s original surfaces intact. The kit offers a clean, practical solution for installations that require flexible switch placement.\u003cbr\u003eBuilt for demanding outdoor use, the RIGID 40052 switch features a durable, waterproof, dust-resistant, and impact-resistant construction. An integrated LED on\/off indicator light provides clear visual confirmation of switch status, helping you monitor your lighting system at a glance. Its rugged design is well suited for vehicles exposed to vibration, weather, trail debris, and frequent use.\u003cbr\u003eThe kit includes one pendant switch, 3M VHB mounting tape, and a radius mount pad for bar mounting. Use the adhesive backing for a secure surface installation or the radius pad for mounting on compatible bars and tubular surfaces. The RIGID Industries Pendant Switch Kit, Single is a versatile accessory for powersports lighting setups and other compatible vehicle applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle-friendly mounting without drilling a hole\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniversal-fit design for powersports and compatible vehicle applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWaterproof, dust-resistant, and impact-resistant construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntegrated LED on\/off indicator light\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes one pendant switch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes 3M VHB mounting tape\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes radius mount pad for bar mounting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRugged design for outdoor and powersports use\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdd On: 1063, 1067, 1031, 30130, 30140, 30150\u003cbr\u003e\nAsin: No\u003cbr\u003e\nProduct Family: Accessories\u003cbr\u003e\nProduct Weight: 0.5\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTest Series: Universal Fit\u003cbr\u003e\nTitle: RIGID Pendant Switch Kit, Single\u003cbr\u003e\nWhat's In The Package: 1 Switch\u003cbr\u003e\nAaiaid Part Number: FLWB40052\u003cbr\u003e\nPart Number: 40052\u003cbr\u003e\nBrand Aaia: FLWB","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":67770869842029,"sku":"40052","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/40052_20PendentSwitch_0.jpg?v=1792214233"},{"product_id":"rigid-industries-36360-3-wire-harness-for-360-series-led-lights-with-backlighting","title":"RIGID Industries 36360 3-Wire Harness for 360-Series LED Lights with Backlighting","description":"Wire Harness, 3 Wire, Fits 360-Series LED Lights With Backlighting\n\u003cp\u003eThe RIGID Industries 36360 wiring harness is designed to connect one pair of RIGID 360-Series LED round lights with backlighting to a 12-volt electrical system. This universal-fit harness provides the essential wiring components for a clean, reliable installation and is compatible with select 4-inch and 6-inch 360-Series LED lights. Use with backlight-equipped versions only; this harness is not intended for SAE models.\u003cbr\u003eThe harness includes battery terminal connectors, flying leads, a 3-position switch, fuse holder with a 20-amp fuse, and a 60-amp, 14-volt DC relay. The switch provides off, standard lighting, and backlight-only operation, allowing convenient control of the connected RIGID lights from the vehicle cabin or another accessible mounting location. Flying leads support flexible installation across a wide range of vehicle and equipment applications.\u003cbr\u003eBuilt for accessory wiring applications, the RIGID Industries 36360 harness helps simplify connection between your lighting system and the vehicle battery. It is a practical choice for replacing or adding wiring to compatible RIGID 360-Series LED round lights while retaining separate control of the backlighting function. Verify that your lights are backlight versions and confirm the vehicle’s electrical system and installation requirements before use. The package includes the wire harness and switch.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCompatibility: Designed for one pair of RIGID 360-Series 4-inch and 6-inch LED round lights with backlighting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring Configuration: 3-wire harness supports standard lighting, off, and backlight-only switch positions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eElectrical Connection: Includes battery terminal connectors, flying leads, fuse holder, 20-amp fuse, and 60-amp 14-volt DC relay\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal fit design supports flexible installation on compatible vehicles and equipment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: For backlight-equipped RIGID 360-Series lights only; not compatible with SAE versions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded Components: Wire harness and 3-position switch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: RIGID Industries\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 36360\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdd On: 1063, 1067, 1031, 30130, 30140, 30150\u003cbr\u003e\nAsin: No\u003cbr\u003e\nProduct Family: Accessories\u003cbr\u003e\nProduct Weight: 0.7\u003cbr\u003e\nProp 65 Yes\/No: No\u003cbr\u003e\nTest Series: Universal Fit\u003cbr\u003e\nTitle: RIGID Wire Harness, 3 Wire, Fits 360-Series LED Lights With Backlighting\u003cbr\u003e\nWhat's In The Package: Wire harness, switch\u003cbr\u003e\nAaiaid Part Number: FLWB36360\u003cbr\u003e\nPart Number: 36360\u003cbr\u003e\nBrand Aaia: FLWB","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":67770872529005,"sku":"36360","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/36360-360-Series_3-Wire_Harness.jpg?v=1792214384"},{"product_id":"anzo-usa-809057-led-light-bulb-resistor-kit-25w-6-2-ohm-pair","title":"ANZO USA 809057 LED Light Bulb Resistor Kit, 25W 6.2 Ohm, Pair","description":"\u003cp\u003eThe ANZO USA 809057 LED Light Bulb Resistor Kit helps support proper operation when upgrading compatible vehicle lighting to LED bulbs. This kit includes two 25-watt, 6.2-ohm resistors designed for 12-volt electrical systems, helping address common LED conversion issues such as hyperflashing or turn-signal compatibility concerns. The resistors are intended for vehicle lighting applications and provide a practical solution for maintaining dependable performance after an LED installation.\u003cbr\u003eEach resistor uses a splice attachment method for connection to the vehicle wiring, allowing installation into the appropriate lighting circuit. Bulbs are not included because the kit is designed to work with compatible LED bulbs already selected for the vehicle. For best results, verify the vehicle application, wiring requirements, and resistor placement before installation. Proper installation should include secure electrical connections and suitable mounting away from heat-sensitive components.\u003cbr\u003eThe ANZO USA 809057 resistor kit is SAE\/DOT compliant and built for use with 12-volt automotive lighting systems. It is supplied as a pair, making it suitable for applications that require resistors on both sides of a lighting circuit. Always follow applicable wiring procedures and observe the included product warnings. This product contains chemicals recognized by the State of California as causing cancer and birth defects or other reproductive harm. Visit www.P65Warnings.ca.gov for additional information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e25-watt, 6.2-ohm LED load resistors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes a pair of resistors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for 12-volt automotive lighting systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSplice attachment method for wiring installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupports compatible LED bulb conversions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBulbs included: Yes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSAE\/DOT compliant\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAttachment Method: Splice\u003cbr\u003e\nBulbs Included: Yes\u003cbr\u003e\nProp 65   Long Label: WARNING: This product can expose you to one or more chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to?www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65   Warning Label: Warning - Both Cancer and Reproduction.jpg\u003cbr\u003e\nProp 65 (C, R Or Cr): CR\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nSae\/Dot Compliant: Yes\u003cbr\u003e\nVoltage: 12\u003cbr\u003e\nWattage: 25\u003cbr\u003e\nAaiaid Part Number: ZUKT809057\u003cbr\u003e\nPart Number: 809057\u003cbr\u003e\nBrand Aaia: ZUKT","brand":"ANZO USA","offers":[{"title":"Default Title","offer_id":67790338916461,"sku":"809057","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/809057.jpg?v=1792376639"},{"product_id":"baja-designs-reflex-light-actuator-kit-80-0001-for-lp4-lp6-lp9-and-xl-m-lights","title":"Baja Designs Reflex Light Actuator Kit 80-0001 for LP4, LP6, LP9 and XL-M Lights","description":"Reflex Light Actuator Kit – LP4\/LP6\/LP9\/XL-M Housing\n\u003cp\u003eTake control of your lighting with the Baja Designs Reflex Light Actuator Kit, part number 80-0001. Designed for compatible Baja Designs LP4, LP6, LP9 and XL-M housings, this single actuator lets you adjust the pitch angle of your lights while driving. With convenient in-cab switch operation, you can quickly fine-tune the beam direction to improve illumination on trails, work sites and changing terrain.\u003cbr\u003eThe Reflex Light Actuator is engineered for direct installation on existing Baja Designs light brackets. Custom hardware is included to help simplify installation and maintain a clean, integrated appearance. This actuator kit is designed as an accessory light controller for compatible Baja Designs lighting systems and offers a practical way to adjust light positioning without manually repositioning the lamps.\u003cbr\u003eIn addition to LP-series and XL-series applications, Baja Designs identifies this actuator system for use with select OnX6 and S8 light bars. Verify light and bracket compatibility before installation. The wiring harness is sold separately, allowing users to select the appropriate control and wiring components for their setup. The universal fitment designation refers to vehicle application, while compatibility remains dependent on the Baja Designs light and mounting configuration.\u003cbr\u003eBuilt for dependable off-road use, the Baja Designs Reflex Light Actuator Kit is backed by the brand’s Lifetime Limited Warranty. This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for Baja Designs LP4, LP6, LP9 and XL-M light housings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustment Control: Allows on-the-fly pitch adjustment for improved beam positioning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Mounts directly to existing Baja Designs light brackets\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHardware: Includes custom mounting hardware for installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Intended for select LP-series, XL-series, OnX6 and S8 lighting systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring: Wiring harness sold separately\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal vehicle fitment; verify light and bracket compatibility\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Backed by Baja Designs’ Lifetime Limited Warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: Reflex Light Actuator Kit – LP4\/LP6\/LP9\/XL-M Housing\u003cbr\u003e\nExt: LP4, LP6, LP9, XL-M Actuator Kit\u003cbr\u003e\nTle: LP4, LP6, LP9, XL-M Actuator Kit\u003cbr\u003e\nProduct Type: Accessory Light Controller Kit\u003cbr\u003e\nProduct Fitment: Universal\u003cbr\u003e\nProduct Information: LP\/XL-M Light Actuator, Single\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX80-0001\u003cbr\u003e\nPart Number: 80-0001\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798384738413,"sku":"800001","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_80-0001-IMG_001_P04_ANG_A.jpg?v=1792460837"},{"product_id":"baja-designs-reflex-light-actuator-kit-for-xl-standard-housing-part-80-0007","title":"Baja Designs Reflex Light Actuator Kit for XL Standard Housing, Part 80-0007","description":"Reflex Light Actuator Kit – XL Standard Housing\n\u003cp\u003eThe Baja Designs Reflex Light Actuator Kit is designed for Baja Designs XL Standard Series lights, including XL Standard and XL Pro configurations. Part 80-0007 provides convenient on-the-fly control of your light’s pitch angle, helping you adjust the direction of illumination as trail conditions and terrain change. With the touch of a switch, you can position the light for improved visibility without manually repositioning the lamp.\u003cbr\u003eDesigned for straightforward installation, the Reflex Light Actuator mounts directly to existing Baja Designs light brackets using the included custom hardware. Its integrated design adds adjustable lighting capability while maintaining a clean, secure installation on compatible XL Standard housings. The kit is intended for universal vehicle fitment when used with the appropriate Baja Designs XL Standard Series light and bracket setup.\u003cbr\u003eThis Baja Designs actuator kit includes a single XL Standard Housing actuator. A wiring harness is required for operation and is sold separately. The actuator is backed by Baja Designs’ Lifetime Limited Warranty, providing long-term support and purchase protection. Verify compatibility with your specific XL Standard Series light, mounting bracket, and wiring configuration before installation. This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDesigned for Baja Designs XL Standard Series lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with XL Standard and XL Pro housing configurations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAllows on-the-fly adjustment of light pitch angle\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounts directly to existing Baja Designs light brackets\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes custom mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSingle actuator kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniversal vehicle fitment when paired with compatible Baja Designs components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring harness sold separately\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBacked by Baja Designs’ Lifetime Limited Warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: Reflex Light Actuator Kit – XL Standard Housing\u003cbr\u003e\nExt: XL Standard Housing (Pro) Actuator Kit\u003cbr\u003e\nTle: XL Standard Housing (Pro) Actuator Kit\u003cbr\u003e\nProduct Type: Accessory Light Controller Kit\u003cbr\u003e\nProduct Fitment: Universal\u003cbr\u003e\nProduct Information: XL Light Actuator, Single\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX80-0007\u003cbr\u003e\nPart Number: 80-0007\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798385361005,"sku":"800007","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_80-0007-IMG_002_P05_ANG_A.jpg?v=1792460842"},{"product_id":"baja-designs-reflex-light-actuator-kit-for-onx6-double-light-bars-part-number-80-0012","title":"Baja Designs Reflex Light Actuator Kit for OnX6+ Double Light Bars 80-0012","description":"Reflex Light Actuator Kit – OnX6+ Light Bar\n\u003cp\u003eTake control of your Baja Designs OnX6+ light bar with the Reflex Light Actuator Kit, Part Number 80-0012. Designed for OnX6 series double light bars measuring 20 inches and longer, this accessory lets you adjust the pitch angle of your lights at the touch of a switch. By changing the light position while driving, you can direct illumination where it is needed most on trails, work sites, and off-road routes.\u003cbr\u003eThe actuator kit is engineered to mount directly to existing Baja Designs light brackets using the included custom hardware. This design helps simplify installation while maintaining a clean, integrated appearance on your lighting setup. The kit is intended for universal fitment with compatible Baja Designs OnX6+ double light bar configurations. Wiring harnesses are sold separately and are required for switch-based operation.\u003cbr\u003eBuilt for practical control and reliable off-road use, the Baja Designs Reflex Light Actuator adds convenient adjustability without requiring manual repositioning of the light bar. It is a dedicated accessory light controller kit designed specifically for Baja Designs OnX6 applications and is backed by the brand’s Lifetime Limited Warranty for added purchase protection. Confirm compatibility with your existing brackets and light bar before installation.\u003cbr\u003eThis product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for Baja Designs OnX6+ double light bars measuring 20 inches and longer\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Lighting: Changes the light bar pitch angle with the touch of a switch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Installs directly to existing Baja Designs light brackets\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHardware: Includes custom mounting hardware for installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring: Wiring harnesses are sold separately\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal fitment for compatible Baja Designs OnX6 configurations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Backed by Baja Designs’ Lifetime Limited Warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Accessory light controller kit\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: Reflex Light Actuator Kit – OnX6+ Light Bar\u003cbr\u003e\nExt: OnX6+ Double (20+ Length) Actuator Kit\u003cbr\u003e\nTle: OnX6+ Double (20+ Length) Actuator Kit\u003cbr\u003e\nActuator Kit: OnX6 Double (20\"+ Length)\u003cbr\u003e\nProduct Type: Accessory Light Controller Kit\u003cbr\u003e\nProduct Fitment: Universal\u003cbr\u003e\nProduct Information: OnX6 Light Actuator, Double\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX80-0012\u003cbr\u003e\nPart Number: 80-0012\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798386409581,"sku":"800012","price":214.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_80-0012-IMG_001_P04_ANG_A.jpg?v=1792460847"},{"product_id":"baja-designs-reflex-light-actuator-kit-for-s8-light-bars-part-80-0013","title":"Baja Designs Reflex Light Actuator Kit for S8 Light Bars, Part 80-0013","description":"Reflex Light Actuator Kit – S8 Light Bar\n\u003cp\u003eTake control of your Baja Designs S8 light bar with the Reflex Light Actuator Kit, Part 80-0013. This single-actuator accessory lets you adjust the pitch angle of your light from inside the vehicle or at the controls, helping you direct illumination where it is needed as trail conditions change. Fine-tune the beam angle on the fly for improved visibility over varying terrain, inclines, and obstacles.\u003cbr\u003eDesigned specifically for Baja Designs S8 series light bars, this actuator mounts directly to existing Baja Designs light brackets using the included custom hardware. The direct-mount design supports a clean installation and helps reduce the need for additional fabrication or bracket modifications. The kit is intended for universal fitment when used with compatible S8 lighting and mounting hardware. A wiring harness is required for operation and is sold separately.\u003cbr\u003eThe Baja Designs Reflex Light Actuator Kit provides a practical way to add adjustable light positioning to an S8 lighting setup without replacing the light bar or mounting system. Its single-actuator configuration is suitable for applications using one actuator on an S8 light bar, including the S8 Single configuration. Baja Designs backs this accessory with a Lifetime Limited Warranty, providing long-term coverage for your lighting investment. This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDesigned for Baja Designs S8 series light bars\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjusts light pitch angle on the fly\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSingle-actuator configuration for S8 lighting applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounts directly to existing Baja Designs light brackets\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes custom mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring harness sold separately\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniversal fitment with compatible S8 components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBacked by Baja Designs Lifetime Limited Warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: Reflex Light Actuator Kit – S8 Light Bar\u003cbr\u003e\nExt: S8 Single (10 Length) Actuator Kit\u003cbr\u003e\nTle: S8 Single (10 Length) Actuator Kit\u003cbr\u003e\nActuator Kit: S8 Single (10\" Length)\u003cbr\u003e\nProduct Type: Accessory Light Controller Kit\u003cbr\u003e\nProduct Fitment: Universal\u003cbr\u003e\nProduct Information: S8 Light Actuator, Single\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX80-0013\u003cbr\u003e\nPart Number: 80-0013\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798387228781,"sku":"800013","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_80-0013-IMG_002_P05_ANG_A.jpg?v=1792460852"},{"product_id":"baja-designs-reflex-light-actuator-kit-for-s8-double-light-bars-part-number-80-0014","title":"Baja Designs Reflex Light Actuator Kit for S8 Double Light Bars 80-0014","description":"Reflex Light Actuator Kit – S8 Light Bar\n\u003cp\u003eTake control of your Baja Designs S8 light bar with the Reflex Light Actuator Kit, part number 80-0014. Designed for S8 double light bars measuring 20 inches or longer, this accessory allows you to adjust the pitch angle of your lights from inside the vehicle or at the control switch. Adjusting the beam angle on demand helps you maintain the best illumination position when navigating trails, changing terrain, or adapting to different driving conditions.\u003cbr\u003eThe actuator kit is engineered to mount directly to existing Baja Designs light brackets and includes custom mounting hardware for a streamlined installation. Its direct-fit design helps simplify setup while keeping the actuator securely integrated with your S8 lighting system. A wiring harness is required for operation and is sold separately. This kit is intended for universal fitment when used with compatible Baja Designs S8 series applications.\u003cbr\u003eBuilt for off-road lighting control, the Baja Designs Reflex Light Actuator Kit provides convenient, on-the-fly beam adjustment without requiring manual repositioning of the light bar. The product is backed by Baja Designs’ Lifetime Limited Warranty for added purchase protection. This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDesigned for Baja Designs S8 double light bars measuring 20 inches or longer\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjusts light pitch angle on the fly for improved trail illumination\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounts directly to existing Baja Designs light brackets\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes custom mounting hardware for installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring harness sold separately\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniversal fitment for compatible S8 series applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBacked by Baja Designs’ Lifetime Limited Warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: Reflex Light Actuator Kit – S8 Light Bar\u003cbr\u003e\nExt: S8 Double (20+ Length) Actuator Kit\u003cbr\u003e\nTle: S8 Double (20+ Length) Actuator Kit\u003cbr\u003e\nActuator Kit: S8 Double (20\"+ Length)\u003cbr\u003e\nProduct Type: Accessory Light Controller Kit\u003cbr\u003e\nProduct Fitment: Universal\u003cbr\u003e\nProduct Information: S8 Light Actuator, Double\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX80-0014\u003cbr\u003e\nPart Number: 80-0014\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798388277357,"sku":"800014","price":202.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_80-0014-IMG_001_P04_ANG_A.jpg?v=1792460858"},{"product_id":"baja-designs-lp9-lp6-lp4-pro-upfitter-wiring-harness-4-light-max-part-number-64-0325-up","title":"Baja Designs LP9, LP6, LP4 Pro Upfitter Wiring Harness 4-Light Max 64-0325-UP","description":"LP9, LP6, LP4 \/ UpfitterWiring Harness - 4 Light Max\n\u003cp\u003eThe Baja Designs LP9, LP6, LP4 Pro Upfitter Wiring Harness, Part Number 64-0325-UP, provides a clean and efficient way to connect multiple auxiliary LED lights to your vehicle. Designed for universal fitment, this harness supports up to four Baja Designs LP9, LP6, or LP4 Pro LED lights, making it an ideal solution for off-road, utility, and adventure vehicle lighting installations.\u003cbr\u003eThe harness includes dedicated leads for integration with factory upfitter auxiliary switches. This allows compatible vehicle controls to operate the connected lights while helping maintain an organized installation. The wiring layout is designed to simplify connecting multiple LP Series lights without requiring a separate harness for each lamp, reducing installation complexity and helping keep the engine bay and accessory wiring tidy.\u003cbr\u003eBuilt specifically for Baja Designs LP9, LP6, and LP4 Pro lighting systems, this auxiliary light wiring harness is a practical choice for adding a multi-light setup to a wide range of vehicles. Its universal fitment makes it suitable for custom applications where reliable power and switch integration are required. Verify vehicle upfitter switch compatibility and lighting configuration before installation. Professional installation is recommended when modifying factory wiring or electrical systems.\u003cbr\u003eThis product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCompatibility: Designed for up to four Baja Designs LP9, LP6, or LP4 Pro LED lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch Integration: Includes leads for connection to factory vehicle upfitter auxiliary switches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Universal auxiliary light wiring harness for off-road and utility vehicles\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSystem Type: Supports multi-light Baja Designs LP Series installations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Baja Designs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 64-0325-UP\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: LP9, LP6, LP4 \/ UpfitterWiring Harness - 4 Light Max\u003cbr\u003e\nExt: LP9, LP6, LP4 \/ UpfitterWiring Harness - 4 Light Max\u003cbr\u003e\nTle: LP9, LP6, LP4 \/ UpfitterWiring Harness - 4 Light Max\u003cbr\u003e\nProduct Type: Auxiliary Light Wiring\u003cbr\u003e\nProduct Fitment: Universal\u003cbr\u003e\nProduct Information: Wiring Harness\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX64-0325-UP\u003cbr\u003e\nPart Number: 64-0325-UP\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798944809069,"sku":"640325UP","price":137.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_64-0325-UP-IMG_001_P04_ANG_A.jpg?v=1792462289"},{"product_id":"baja-designs-lp9-sport-series-2-light-splitter-wiring-harness-640175","title":"Baja Designs LP9 Sport Series 2-Light Splitter Wiring Harness 640175","description":"\u003cp\u003eThe Baja Designs LP9 Sport Series Splitter 2-Light Max Wiring Harness, part number 640175, provides a reliable way to power and control two compatible auxiliary lights. Designed for 12-volt systems, this universal harness supports up to 12 amps and is engineered for use with Baja Designs LP9 Sport, LP6, and LP4 lights. Its two-light splitter configuration simplifies installation when connecting a pair of compatible lamps to a single wiring system.\u003cbr\u003eThe harness includes a convenient On\/Off toggle switch for straightforward light activation. It does not include a momentary switch function, making it well suited for applications that require simple, consistent lighting control. Deutsch connectors help provide secure, dependable electrical connections, while the included wiring harness supports an efficient installation. Mounting hardware is not included, so installers should verify that the required mounting components are available for the intended application.\u003cbr\u003eFeature: Application: Baja Designs LP9 Sport, LP6, and LP4 auxiliary lights. Feature: Capacity: Supports up to two compatible lights with a maximum power capacity of 12 amps. Feature: Switch: Includes an On\/Off toggle switch for convenient operation. Feature: Connectivity: Uses Deutsch connectors for secure electrical connections. Feature: Configuration: Two-light splitter harness designed for universal fitment. Feature: Installation: Wiring harness included; mounting hardware not included. The Baja Designs 640175 harness is a practical solution for organizing and powering a two-light setup while maintaining simple, dependable control. This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for Baja Designs LP9 Sport, LP6, and LP4 auxiliary lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCapacity: Powers up to two compatible lights with a maximum capacity of 12 amps\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch: Includes an On\/Off toggle switch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConnectivity: Equipped with Deutsch connectors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConfiguration: Universal two-light splitter harness\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Wiring harness included; mounting hardware not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nApplication: LP9 Sport\u003cbr\u003e\nDescription: 2 Light Splitter\u003cbr\u003e\nMounting Hardware Included: No\u003cbr\u003e\nProduct Type: LP9 Sport Splitter 2-Light Max Wiring Harness\u003cbr\u003e\nSwitch Included: Yes\u003cbr\u003e\nSwitch Type: On\/Off\u003cbr\u003e\nTerminal Type: Deutsch Connectors\u003cbr\u003e\nUniversal Or Specific: Universal\u003cbr\u003e\nWiring Harness Description: 2 Light Splitter Harness\u003cbr\u003e\nWiring Harness Included: Yes\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: LP9 Sport Series Splitter 2-Light Max Wiring Harness\u003cbr\u003e\nExt: LP9 Sport Series Splitter 2-Light Max Wiring Harness\u003cbr\u003e\nTle: LP9 Sport Series Splitter 2-Light Max Wiring Harness\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX640175\u003cbr\u003e\nPart Number: 640175\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798945005677,"sku":"640175","price":36.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_640175-IMG_001_P04_ANG_A.jpg?v=1792462297"},{"product_id":"baja-designs-lp6-lp9-pro-2-light-max-wiring-harness-640172","title":"Baja Designs LP6\/LP9 Pro 2-Light Max Wiring Harness 640172","description":"\u003cp\u003eThe Baja Designs LP6\/LP9 Pro 2-Light Max Wiring Harness, part number 640172, provides the complete control and connectivity solution for operating two compatible LP6 or LP9 Pro lights. Designed for universal fitment, this harness helps simplify installation while providing the functionality needed to manage a two-light setup from a single wiring system.\u003cbr\u003eThis harness includes an On\/Off\/On switch, allowing convenient control of the connected lighting system and supporting versatile lighting operation. Deutsch connectors provide secure, dependable terminal connections suited for demanding automotive and off-road environments. The harness is supplied with approximately 12 feet of wiring for flexible routing between the lights, power source, and switch location.\u003cbr\u003eThe Baja Designs 640172 wiring harness is intended specifically for LP6 and LP9 Pro applications and includes the wiring harness and switch required for operation. Mounting hardware is not included, so installation may require separately sourced hardware based on the vehicle and mounting location. Its universal configuration makes it a practical choice for custom lighting installations where reliable connections and straightforward controls are essential.\u003cbr\u003eThis Baja Designs LP6\/LP9 Pro 2-Light Max Wiring Harness is a direct solution for users who want full versatility and functionality from a two-light setup. Use it when replacing or upgrading the wiring for compatible LP6 or LP9 Pro lights, and follow the product and vehicle manufacturer instructions for proper installation. California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for Baja Designs LP6 and LP9 Pro lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo-Light Configuration: Supports operation of two compatible lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch Included: Includes an On\/Off\/On control switch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTerminal Type: Uses dependable Deutsch connectors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring Length: Provides approximately 12 feet of wiring for flexible routing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal design for custom vehicle installations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Hardware: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nApplication: LP9\/LP6 Pro\u003cbr\u003e\nDescription: 2 Light Harness\u003cbr\u003e\nMounting Hardware Included: No\u003cbr\u003e\nProduct Type: LP9\/LP6 Pro 2-Light Max Wiring Harness\u003cbr\u003e\nSwitch Included: Yes\u003cbr\u003e\nSwitch Type: On\/Off\/On\u003cbr\u003e\nTerminal Type: Deutsch Connectors\u003cbr\u003e\nUniversal Or Specific: Universal\u003cbr\u003e\nWiring Harness Description: 2 Light Harness\u003cbr\u003e\nWiring Harness Included: Yes\u003cbr\u003e\nWiring Harness Length (In.): 144\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: LP6\/LP9 Pro 2-Light Max Wiring Harness\u003cbr\u003e\nExt: LP6\/LP9 Pro 2-Light Max Wiring Harness\u003cbr\u003e\nTle: LP6\/LP9 Pro 2-Light Max Wiring Harness\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX640172\u003cbr\u003e\nPart Number: 640172\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798945071213,"sku":"640172","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_640172-IMG_001_P04_ANG_A.jpg?v=1792462303"},{"product_id":"baja-designs-lp9-lp6-series-upfitter-lock-out-wiring-harness-640167","title":"Baja Designs LP9\/LP6 Series Upfitter Lock-Out Wiring Harness 640167","description":"\u003cp\u003eThe Baja Designs LP9\/LP6 Series Upfitter Lock-Out Wiring Harness, part number 640167, provides a reliable wiring solution for LP9 and LP6 series lights. Designed for seamless compatibility with power modules such as sPOD, Switch-Pros, and factory upfitter systems, this harness helps prevent simultaneous power flow to both high and low circuits during installation and operation.\u003cbr\u003eThis universal harness simplifies the wiring process by helping eliminate circuit conflicts and reducing guesswork when integrating LP series lighting into a vehicle’s electrical system. It is well suited for installations that use aftermarket switch panels or factory auxiliary controls, offering a practical way to manage lighting circuits with greater consistency and confidence.\u003cbr\u003eApplication: LP9\/LP6 series lights. Universal fitment makes the Baja Designs 640167 harness adaptable to a wide range of vehicle wiring configurations. The wiring harness is included, while mounting hardware and a switch are not included, allowing installers to use their preferred mounting and control components.\u003cbr\u003eThe Baja Designs LP9\/LP6 Series Upfitter Lock-Out Wiring Harness is intended for clean, dependable integration of compatible lighting systems. Review the vehicle’s wiring layout and power-module requirements before installation, and follow all applicable electrical safety practices. California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: LP9\/LP6 series lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: LP9\/LP6 Series Upfitter Lock-Out Wiring Harness\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Designed for sPOD, Switch-Pros, and factory upfitter systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFunction: Helps prevent simultaneous power flow to high and low circuits\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring Harness Included: Yes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Hardware Included: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch Included: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 640167\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Baja Designs\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nApplication: LP9\/LP6\u003cbr\u003e\nDescription: Upfitter Lock-Out Harness\u003cbr\u003e\nMounting Hardware Included: No\u003cbr\u003e\nProduct Type: LP9\/LP6 Series Upfitter Lock-Out Wiring Harness\u003cbr\u003e\nSwitch Included: No\u003cbr\u003e\nUniversal Or Specific: Universal\u003cbr\u003e\nWiring Harness Description: Upfitter Lock-Out Harness\u003cbr\u003e\nWiring Harness Included: Yes\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: LP9\/LP6 Series Upfitter Lock-Out Wiring Harness\u003cbr\u003e\nExt: LP9\/LP6 Series Upfitter Lock-Out Wiring Harness\u003cbr\u003e\nTle: LP9\/LP6 Series Upfitter Lock-Out Wiring Harness\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX640167\u003cbr\u003e\nPart Number: 640167\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798945202285,"sku":"640167","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_640167-IMG_001_P04_ANG_A.jpg?v=1792462311"},{"product_id":"baja-designs-640122-onx6-hybrid-laser-s8-wiring-harness-with-mode-switch-for-one-light-bar","title":"Baja Designs 640122 OnX6\/Hybrid\/Laser\/S8 Wiring Harness with Mode Switch for One Light Bar","description":"OnX6\/Hybrid\/Laser\/S8 w\/Mode Switch (1 Bar) Wiring Harness\n\u003cp\u003eThe Baja Designs 640122 wiring harness simplifies installation and provides reliable control for a single OnX6, Hybrid, Laser, or S8 light bar. Designed for universal fitment, this complete harness uses heavy-duty wiring and is well suited for demanding off-road and race applications. The integrated controls help organize light bar operation while reducing installation guesswork.\u003cbr\u003eA dedicated On\/Off toggle switch controls the primary light bar function, while a separate mode switch operates the secondary amber backlight or laser function when supported by the compatible light. This setup lets you switch between lighting functions quickly and conveniently from the vehicle cabin or control location. The harness includes three-pin connections and splice connectors for practical electrical integration.\u003cbr\u003eThe Baja Designs 640122 harness includes the wiring and switches required for one light bar, but mounting hardware is not included. Its extended 100-inch harness length provides useful routing flexibility for a variety of vehicle configurations. Verify light compatibility and installation requirements before use, and follow all applicable wiring and safety instructions. This product carries a California Proposition 65 warning regarding potential exposure to chemicals known to cause cancer and birth defects or other reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Compatible with OnX6, Hybrid, Laser, and S8 light bars\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eControl: Includes a dedicated On\/Off switch for the primary light bar function\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMode Switch: Separate switch for amber backlight or laser function\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring: Heavy-duty wire gauge for demanding off-road and race applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConnections: Three-pin terminal connections with splice connectors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHarness Length: 100 inches for flexible installation routing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal vehicle application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded: Wiring harness and switches; mounting hardware is not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nApplication: OnX6\/Hybrid\/Laser\/S8\u003cbr\u003e\nDescription: 1 Bar;  Mode Switch\u003cbr\u003e\nMounting Hardware Included: No\u003cbr\u003e\nProduct Type: OnX6\/Hybrid\/Laser\/S8 Wiring Harness w\/ Mode Switch\u003cbr\u003e\nSwitch Included: Yes\u003cbr\u003e\nSwitch Type: On\/Off Switch;  Mode Switch\u003cbr\u003e\nTerminal Connector: Three-Pin Connections\u003cbr\u003e\nTerminal Type: Splice Connectors\u003cbr\u003e\nUniversal Or Specific: Universal\u003cbr\u003e\nWiring Harness Description: Heavy-Duty Wire Gauge\u003cbr\u003e\nWiring Harness Included: Yes\u003cbr\u003e\nWiring Harness Length (In.): 100\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: OnX6\/Hybrid\/Laser\/S8 w\/Mode Switch (1 Bar) Wiring Harness\u003cbr\u003e\nExt: OnX6\/Hybrid\/Laser\/S8 w\/Mode Switch (1 Bar) Wiring Harness\u003cbr\u003e\nTle: OnX6\/Hybrid\/Laser\/S8 w\/Mode Switch (1 Bar) Wiring Harness\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX640122\u003cbr\u003e\nPart Number: 640122\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798945333357,"sku":"640122","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_640122-IMG_001_P04_ANG_A.jpg?v=1792462317"},{"product_id":"baja-designs-onx6-xl-hi-power-2-light-wiring-harness-with-mode-switch-part-number-640119","title":"Baja Designs OnX6\/XL Hi-Power 2-Light Wiring Harness with Mode Switch 640119","description":"OnX6\/XL Hi-Power w\/Mode Switch 2-Light Max (325 Watts) Wiring Harness\n\u003cp\u003eThe Baja Designs OnX6\/XL Hi-Power Wiring Harness with Mode Switch is a complete, heavy-duty solution for controlling up to two compatible OnX6 or XL LED lights. Part Number 640119 is designed for Baja Designs XL Pro, XL Sport, and OnX6 lighting systems, simplifying installation while providing dependable performance for demanding off-road and race applications. The universal harness supports a combined lighting load of up to 325 watts and is built to handle high-power auxiliary lighting setups.\u003cbr\u003eThis wiring harness includes an on\/off toggle switch for convenient light control and a separate mode switch button for dimming functionality. The included controls allow drivers to operate the lights from the vehicle cabin without relying solely on the factory high-beam circuit. Three-pin connections and splice connectors support straightforward integration, while the heavy-duty wire construction provides reliable power delivery and durability in rugged environments. The harness extends approximately 100 inches to help accommodate a wide range of vehicle installations.\u003cbr\u003eDesigned to take the guesswork out of wiring, the Baja Designs 640119 harness comes complete with the necessary harness components and switches, although mounting hardware is not included. Its universal fitment makes it suitable for custom installations using compatible OnX6 and XL lighting products. Whether used for trail lighting, racing, work vehicles, or other off-road applications, this harness provides a clean and practical way to add high-power lighting control with selectable dimming capability. California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Compatible with Baja Designs OnX6 and XL LED light systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLighting Capacity: Supports up to two lights with a combined output of up to 325 watts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitches: Includes an on\/off toggle switch and a separate mode switch for dimming\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Heavy-duty wiring designed for demanding off-road and race applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConnections: Uses three-pin connections and splice connectors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHarness Length: Approximately 100 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal design for compatible vehicle and lighting installations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded: Wiring harness and switches; mounting hardware is not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nApplication: OnX6\/XL\u003cbr\u003e\nDescription: 2-Lights Max;  Mode Switch;  355 Watts\u003cbr\u003e\nMounting Hardware Included: No\u003cbr\u003e\nProduct Type: OnX6\/XL Hi-Power Wiring Harness w\/ Mode Switch\u003cbr\u003e\nSwitch Included: Yes\u003cbr\u003e\nSwitch Type: On\/Off Switch;  Mode Switch\u003cbr\u003e\nTerminal Connector: Three-Pin Connections\u003cbr\u003e\nTerminal Type: Splice Connectors\u003cbr\u003e\nUniversal Or Specific: Universal\u003cbr\u003e\nWiring Harness Description: Heavy-Duty Wire Gauge\u003cbr\u003e\nWiring Harness Included: Yes\u003cbr\u003e\nWiring Harness Length (In.): 100\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: OnX6\/XL Hi-Power w\/Mode Switch 2-Light Max (325 Watts) Wiring Harness\u003cbr\u003e\nExt: OnX6\/XL Hi-Power w\/Mode Switch 2-Light Max (325 Watts) Wiring Harness\u003cbr\u003e\nTle: OnX6\/XL Hi-Power w\/Mode Switch 2-Light Max (325 Watts) Wiring Harness\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX640119\u003cbr\u003e\nPart Number: 640119\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798945497197,"sku":"640119","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_640119-IMG_001_P04_ANG_A.jpg?v=1792462324"},{"product_id":"baja-designs-squadron-s2-s1-on-off-2-light-splitter-wiring-harness-640117","title":"Baja Designs Squadron\/S2\/S1 On\/Off 2-Light Splitter Wiring Harness 640117","description":"Squadron\/S2\/S1 On\/Off 2-Light Max (150 Watts) Wiring Harness\n\u003cp\u003eUpgrade your off-road lighting system with the Baja Designs Squadron\/S2\/S1 On\/Off 2-Light Splitter Wiring Harness, Part Number 640117. This universal 12-volt harness is designed to provide a dependable connection for compatible Baja Designs Squadron, S2, and S1 LED lights, helping deliver consistent performance on trails, work vehicles, and other demanding applications. Its two-light configuration supports lighting setups rated for up to 150 watts.\u003cbr\u003eThe integrated on\/off switch provides convenient control of both connected lights from a single harness. Two two-pin connections simplify the wiring layout, while splice connectors support a practical installation in a variety of vehicle configurations. The harness is supplied as a complete wiring solution and is intended for universal application, making it a versatile choice for custom off-road lighting projects.\u003cbr\u003eThis Baja Designs wiring harness is engineered for users who need a straightforward way to connect and control two compatible lights without adding unnecessary complexity. It is suitable for Squadron and S2 applications and also supports S1 lighting systems as specified by the manufacturer. Mounting hardware is not included, so installation may require vehicle-specific fasteners or additional mounting components. Verify light compatibility, total system wattage, and installation requirements before use.\u003cbr\u003eCalifornia Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for Baja Designs Squadron, S2, and S1 LED lighting systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePower Capacity: Supports two lights with a combined maximum rating of 150 watts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch Included: Includes an integrated on\/off switch for convenient light control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConnections: Provides two two-pin terminal connections\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTerminal Type: Uses splice connectors for practical wiring installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHarness Configuration: Two-light splitter wiring harness\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal design for custom vehicle applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Hardware: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nApplication: Squadron\/S2\u003cbr\u003e\nDescription: 2 Light Max;  150 watts\u003cbr\u003e\nMounting Hardware Included: No\u003cbr\u003e\nProduct Type: Squadron\/S2\/S1 2-Light Splitter Wiring Harness\u003cbr\u003e\nSwitch Included: Yes\u003cbr\u003e\nSwitch Type: On\/Off\u003cbr\u003e\nTerminal Connector: 2 Two-Pin Connections\u003cbr\u003e\nTerminal Type: Splice Connectors\u003cbr\u003e\nUniversal Or Specific: Universal\u003cbr\u003e\nWiring Harness Description: 2-Light Splitter Harness\u003cbr\u003e\nWiring Harness Included: Yes\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: Squadron\/S2\/S1 On\/Off 2-Light Max (150 Watts) Wiring Harness\u003cbr\u003e\nExt: Squadron\/S2\/S1 On\/Off 2-Light Max (150 Watts) Wiring Harness\u003cbr\u003e\nTle: Squadron\/S2\/S1 On\/Off 2-Light Max (150 Watts) Wiring Harness\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX640117\u003cbr\u003e\nPart Number: 640117\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798945693805,"sku":"640117","price":31.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_640117-IMG_001_P04_ANG_A.jpg?v=1792462332"},{"product_id":"baja-designs-640115-onx6-and-s8-on-off-wiring-harness","title":"Baja Designs 640115 OnX6 and S8 On\/Off Wiring Harness","description":"OnX6 (10\"-20\") \/ S8 (10\"-30\") On\/Off Wiring Harness\n\u003cp\u003eThe Baja Designs 640115 OnX6 and S8 On\/Off Wiring Harness provides a reliable, vehicle-ready connection for select Baja Designs lighting systems. It is designed for use with one OnX6+ light bar from 10 to 20 inches, one S8 light bar from 10 to 30 inches, or a compatible XL Sport or XL Pro auxiliary light. This universal wiring harness simplifies installation while providing dependable power and control for off-road lighting applications.\u003c\/p\u003e\u003cp\u003eThe harness connects directly to the vehicle battery using positive and negative terminals, while the included on\/off switch provides convenient control from inside the vehicle. A weather-resistant three-pin connector plugs into compatible OnX6 Plus, S8, XL Sport, or XL Pro lights, helping create a secure and organized connection. Splice connectors are included for straightforward wiring and routing throughout the vehicle.\u003c\/p\u003e\u003cp\u003eBaja Designs develops its wiring harnesses with a focus on safe, reliable performance in demanding environments. The 640115 harness is an effective replacement or installation solution for compatible lighting setups and is suitable for universal applications. Mounting hardware is not included, so installation may require additional vehicle-specific hardware depending on the application. Professional installation is recommended when necessary to ensure correct wiring and proper circuit protection.\u003c\/p\u003e\u003cp\u003eThis product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for one 10- to 20-inch Baja Designs OnX6+ light bar, one 10- to 30-inch S8 light bar, or a compatible XL Sport or XL Pro auxiliary light\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand and Part Number: Baja Designs 640115\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch: Includes an on\/off switch for convenient lighting control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTerminal Connector: Weather-resistant three-pin connection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTerminal Type: Splice connectors for vehicle wiring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBattery Connection: Positive and negative terminals connect to the vehicle battery\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal wiring harness for compatible Baja Designs lighting systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Hardware: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nApplication: OnX6 (10\"-20\") \/ S8 (10\"-30\")\u003cbr\u003e\nDescription: Wiring Harness\u003cbr\u003e\nMounting Hardware Included: No\u003cbr\u003e\nProduct Type: OnX6 (10\"-20\") \/ S8 (10\"-30\") On\/Off Wiring Harness\u003cbr\u003e\nSwitch Included: Yes\u003cbr\u003e\nSwitch Type: On\/Off\u003cbr\u003e\nTerminal Connector: Three-Pin Connection\u003cbr\u003e\nTerminal Type: Splice Connectors\u003cbr\u003e\nUniversal Or Specific: Universal\u003cbr\u003e\nWiring Harness Description: Wiring Harness\u003cbr\u003e\nWiring Harness Included: Yes\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: OnX6 (10\"-20\") \/ S8 (10\"-30\") On\/Off Wiring Harness\u003cbr\u003e\nExt: OnX6 (10\"-20\") \/ S8 (10\"-30\") On\/Off Wiring Harness\u003cbr\u003e\nTle: OnX6 (10\"-20\") \/ S8 (10\"-30\") On\/Off Wiring Harness\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX640115\u003cbr\u003e\nPart Number: 640115\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798945923181,"sku":"640115","price":31.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_640115-IMG_001_P04_ANG_A.jpg?v=1792462339"},{"product_id":"baja-designs-onx6-s8-xl-upfitter-wiring-harness-640094","title":"Baja Designs OnX6\/S8\/XL Upfitter Wiring Harness 640094","description":"\u003cp\u003eThe Baja Designs OnX6\/S8\/XL Upfitter Wiring Harness, part number 640094, simplifies the installation of compatible Baja Designs auxiliary lighting on vehicles equipped with factory upfitter switches. Designed for direct integration with existing vehicle switch systems, this harness helps create a clean and organized wiring setup without requiring a separate aftermarket switch panel for basic operation.\u003cbr\u003eThe harness is compatible with Baja Designs OnX6, S8, and XL lighting applications and features a three-pin terminal connection with splice connectors. Its universal design supports a range of installation configurations and can also be used to integrate switch panels such as sPOD or other compatible control units. The wiring harness is included, while mounting hardware and a switch are not included.\u003cbr\u003eFor installations using two lights on a single harness, the Baja Designs three-pin OnX6\/S8\/XL 2-light splitter, part number 613608, is also required. Verify your vehicle's factory upfitter wiring and lighting configuration before installation. This harness fits select Ford F-150 applications from 2010 through 2014 and 2017 through 2021, while its universal configuration may support additional compatible vehicles when properly installed.\u003cbr\u003eThis product is identified by Baja Designs as potentially exposing users to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for Baja Designs OnX6, S8, and XL lighting systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Integration: Connects compatible lighting to factory upfitter switches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHarness Included: Includes one OnX6\/S8\/XL upfitter wiring harness\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTerminal Connector: Uses one three-pin connection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTerminal Type: Features splice connectors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Universal wiring harness design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch Included: No switch included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Hardware: Mounting hardware not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExpansion: Requires Baja Designs part number 613608 splitter for two-light installations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select Ford F-150 models from 2010-2014 and 2017-2021\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nApplication: OnX6\/S8\/XL\u003cbr\u003e\nDescription: 1 Upfitter Harness\u003cbr\u003e\nMounting Hardware Included: No\u003cbr\u003e\nProduct Type: OnX6\/S8\/XL Upfitter Upfitter Wiring Harness\u003cbr\u003e\nSwitch Included: No\u003cbr\u003e\nTerminal Connector: 1 Three-Pin Connection\u003cbr\u003e\nTerminal Type: Splice Connectors\u003cbr\u003e\nUniversal Or Specific: Universal\u003cbr\u003e\nWiring Harness Description: 1 Upfitter Harness\u003cbr\u003e\nWiring Harness Included: Yes\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: OnX6\/S8\/XL Upfitter Wiring Harness\u003cbr\u003e\nExt: OnX6\/S8\/XL Upfitter Wiring Harness\u003cbr\u003e\nTle: OnX6\/S8\/XL Upfitter Wiring Harness\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX640094\u003cbr\u003e\nPart Number: 640094\u003cbr\u003e\nBrand Aaia: FGXX\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2010\u003cbr\u003e\nFord F-150  2011\u003cbr\u003e\nFord F-150  2012\u003cbr\u003e\nFord F-150  2013\u003cbr\u003e\nFord F-150  2014\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798947037293,"sku":"640094","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_640094-IMG_001_P04_ANG_A.jpg?v=1792462349"},{"product_id":"baja-designs-squadron-s2-s1-2-light-splitter-wiring-harness-613607","title":"Baja Designs Squadron\/S2\/S1 2-Light Splitter Wiring Harness 613607","description":"\u003cp\u003eThe Baja Designs Squadron\/S2\/S1 2-Light Splitter Wiring Harness, part number 613607, provides a simple way to power two compatible auxiliary lights from one main harness. Designed for Squadron, S2, and S1 series lights, this prefabricated splitter supports a clean, plug-and-play installation without requiring custom wiring or additional splicing during setup.\u003cbr\u003eBuilt with two 2-pin connections, the harness makes it easy to distribute power from a single main connection to a pair of Baja Designs lights. Its universal fitment makes it suitable for a variety of vehicle lighting configurations, while the preassembled wiring helps reduce installation time and keeps the finished setup organized. The splitter harness is included, but mounting hardware and a switch are not included.\u003cbr\u003eThe Baja Designs 613607 splitter is a practical wiring solution for off-road vehicles, work trucks, utility vehicles, and other applications using compatible Squadron, S2, or S1 lights. Splice-style terminal connections provide a straightforward method for integrating two lights into an existing Baja Designs lighting system. Always verify light and harness compatibility before installation, and follow the vehicle and lighting manufacturer’s wiring instructions. This product includes a California Proposition 65 warning.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for Squadron, S2, and S1 series lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWiring Harness: Prefabricated 2-light splitter harness\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConnections: Two 2-pin connections for powering compatible lights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Plug-and-play design for use with one main harness\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Universal\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Hardware: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSwitch: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Baja Designs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 613607\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nApplication: Squadron\/S2\/S1~S|D|2 Light Splitter\u003cbr\u003e\nDescription: 2 Light Splitter\u003cbr\u003e\nMounting Hardware Included: No\u003cbr\u003e\nProduct Type: Squadron\/S2\/S1~S|D|2 Light Splitter\u003cbr\u003e\nSwitch Included: No\u003cbr\u003e\nTerminal Connector: 2 Two-Pin Connections\u003cbr\u003e\nTerminal Type: Splice Connectors\u003cbr\u003e\nUniversal Or Specific: Universal\u003cbr\u003e\nWiring Harness Description: 2 Light Splitter Harness\u003cbr\u003e\nWiring Harness Included: Yes\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: Squadron\/S2\/S1 2-Light Splitter\u003cbr\u003e\nExt: Squadron\/S2\/S1 2-Light Splitter\u003cbr\u003e\nTle: Squadron\/S2\/S1 2-Light Splitter\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX613607\u003cbr\u003e\nPart Number: 613607\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798947594349,"sku":"613607","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_613607-IMG_001_P04_ANG_A.jpg?v=1792462357"},{"product_id":"baja-designs-610015-wire-hider-kit-3-foot-universal-auxiliary-light-wiring","title":"Baja Designs 610015 Wire Hider Kit, 3-Foot Universal Auxiliary Light Wiring","description":"\u003cp\u003eThe Baja Designs 610015 Wire Hider Kit provides a clean, professional way to route auxiliary light wiring across your vehicle. Designed for enthusiasts who want a seamless installation, this universal wire management solution helps conceal wiring along the windshield or roof without leaving cables visibly exposed. It creates a finished appearance while supporting a more organized lighting setup.\u003cbr\u003eDeveloped and tested by Baja Designs, the Wire Hider Kit eliminates the need to force wiring into tight gaps or drill into the vehicle during installation. Its practical design helps protect the visual integrity of your vehicle while simplifying the process of routing wires to auxiliary lighting equipment. The 3-foot length offers flexible coverage for a variety of vehicle configurations and installation layouts.\u003cbr\u003eThis Baja Designs wiring accessory is suitable for universal applications and is intended for use with auxiliary light wiring. Whether you are installing a new off-road lighting system or improving the appearance of an existing setup, the 610015 Wire Hider Kit delivers a discreet and effective wiring management option. Professional installation is recommended to ensure proper routing, secure placement, and compatibility with the vehicle and lighting system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eUniversal Fitment: Designed for use with a wide range of vehicles and auxiliary lighting configurations.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDiscreet Routing: Helps conceal wiring along the windshield or roof for a cleaner installation appearance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo Drilling Required: Reduces the need to drill into the vehicle or force wiring into narrow locations.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFlexible Coverage: Includes a 3-foot wire hider for adaptable installation layouts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAuxiliary Light Wiring: Designed to organize and manage wiring used with auxiliary lighting systems.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBaja Designs Quality: Developed and tested by Baja Designs for enthusiast-focused vehicle lighting installations.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: CR\u003cbr\u003e\nProp 65 Warning Label: Prop 65 WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nDes: Wire Hider\u003cbr\u003e\nExt: Wire Hider, 3 ft.\u003cbr\u003e\nTle: Wire Hider, 3 ft.\u003cbr\u003e\nSize: 3 ft.\u003cbr\u003e\nProduct Type: Auxilary Light Wiring\u003cbr\u003e\nProduct Fitment: Universal\u003cbr\u003e\nProduct Information: Wire Hider\u003cbr\u003e\nFitment: Universal\u003cbr\u003e\nAaiaid Part Number: FGXX610015\u003cbr\u003e\nPart Number: 610015\u003cbr\u003e\nBrand Aaia: FGXX","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67798947659885,"sku":"610015","price":30.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FGXX_610015-IMG_001_P04_ANG_A.jpg?v=1792462365"}],"url":"https:\/\/truckarmy.com\/collections\/light-wiring-kits-switches.oembed","provider":"Truck Army","version":"1.0","type":"link"}