{"title":"Shocks \u0026 Struts","description":"\u003cp\u003eDial in your ride. Shocks and struts built for lifted and stock trucks, Jeeps and SUVs, from daily drivers to trail rigs.\u003c\/p\u003e","products":[{"product_id":"bilstein-b8-8112-black-hawk-front-left-corner-module-41-332245-for-2022-2026-toyota-tundra","title":"Bilstein B8 8112 Black Hawk Front Left Corner Module 41-332245 for 2022–2026 Toyota Tundra","description":"B8 8112 Black Hawk - Front Left Corner Module\n\u003cp\u003eUpgrade the front suspension of your Toyota Tundra with the Bilstein B8 8112 Black Hawk 3-Way adjustable front left corner module, part number 41-332245. Designed as a direct-fit solution for light trucks and SUVs, this coilover combines advanced damping control with durable construction for dependable performance on paved roads, rugged trails, and varying vehicle loads. It fits the 2022, 2023, 2024, 2025, and 2026 Toyota Tundra.\u003cbr\u003eThe module uses a large aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and promote cooling during demanding operation. Bilstein ZoneControl® position-sensitive damping helps reduce harsh bottoming while maintaining controlled, compliant suspension action over smaller impacts. The monotube internal design, 60 mm piston, and 22 mm shaft support consistent damping performance across changing terrain and driving conditions.\u003cbr\u003eThree external damping adjustments provide independent high- and low-speed compression control, while the internal bump stop adds further tuning capability. The included spring seat and black front main spring are engineered for a 600-pound-per-inch spring rate, and the EVO Grey damper finish provides a distinctive, durable appearance. The lower eye mount and special upper mount support direct installation, while the smooth-body coilover design is intended for precise suspension tuning without unnecessary complexity.\u003cbr\u003eFeatures: Direct-fit front left corner module for 2022–2026 Toyota Tundra\u003cbr\u003eFeatures: Bilstein B8 8112 Black Hawk 3-Way adjustable coilover design\u003cbr\u003eFeatures: ZoneControl® position-sensitive damping for improved bottoming resistance\u003cbr\u003eFeatures: High- and low-speed compression click adjusters with internal bump stop adjustment\u003cbr\u003eFeatures: Aluminum monotube shock body with finned remote reservoir\u003cbr\u003eFeatures: 60 mm piston and 22 mm shaft for consistent damping control\u003cbr\u003eFeatures: Included spring seat and black 600-pound-per-inch front main spring\u003cbr\u003eFeatures: EVO Grey damper finish with black spring\u003cbr\u003eFeatures: Lower eye mount and special upper mount\u003cbr\u003eFeatures: Bilstein part number 41-332245\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front left corner module for 2022–2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 Black Hawk 3-Way adjustable coilover design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl® position-sensitive damping for improved bottoming resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh- and low-speed compression click adjusters with internal bump stop adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum monotube shock body with finned remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e60 mm piston and 22 mm shaft for consistent damping control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded spring seat and black 600-pound-per-inch front main spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower eye mount and special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein part number 41-332245\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 554.4\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 19.05mm\u003cbr\u003e\nExtended Length (In): 21.83\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nCollapsed Length (Mm): 426.8\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nCollapsed Length (In): 16.80\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nAaiaid Part Number: BBGL41-332245\u003cbr\u003e\nPart Number: 41-332245\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771207188589,"sku":"41332245","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-332245_1.jpg?v=1792219554"},{"product_id":"bilstein-b8-8112-black-hawk-front-right-corner-module-41-332238-for-2022-2026-toyota-tundra","title":"Bilstein B8 8112 Black Hawk Front Right Corner Module 41-332238 for 2022-2026 Toyota Tundra","description":"B8 8112 Black Hawk - Front Right Corner Module\n\u003cp\u003eUpgrade the front right suspension of your Toyota Tundra with the Bilstein B8 8112 Black Hawk 3-way adjustable coilover corner module, part number 41-332238. Designed as a direct-fit solution for light trucks, this premium suspension assembly delivers controlled performance on paved roads, rugged trails, and under changing load conditions. It is compatible with 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models.\u003cbr\u003eThe B8 8112 Black Hawk combines a large aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve heat dissipation. Its monotube internal design and ZoneControl® position-sensitive damping help reduce harsh bottoming while maintaining a smooth, composed ride over smaller impacts. The EVO Grey damper and black spring finish provide a durable, purposeful appearance, while the included spring seat supports straightforward installation.\u003cbr\u003eThree external damping adjustments allow independent tuning of high-speed compression, low-speed compression, and the internal bump stop. This broad adjustment range helps drivers tailor suspension response for trail use, daily driving, towing, and loaded or unloaded conditions. The 60 mm piston, 22 mm shaft, special upper mount, and eye-style lower mount are engineered for the intended application. The module features a 600 lb\/in front main spring rate and does not include a protective boot.\u003cbr\u003eFeature: Direct-fit front right corner module for 2022-2026 Toyota Tundra\u003cbr\u003eFeature: B8 8112 Black Hawk 3-way adjustable coilover design\u003cbr\u003eFeature: Aluminum shock body with finned aluminum remote reservoir\u003cbr\u003eFeature: ZoneControl® position-sensitive damping technology\u003cbr\u003eFeature: High- and low-speed compression click adjusters with internal bump stop adjustment\u003cbr\u003eFeature: Monotube internal design with 60 mm piston and 22 mm shaft\u003cbr\u003eFeature: Includes spring seat with a 600 lb\/in front main spring rate\u003cbr\u003eFeature: EVO Grey damper and black spring finish\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front right corner module for 2022-2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eB8 8112 Black Hawk 3-way adjustable coilover design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum shock body with finned aluminum remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl® position-sensitive damping technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh- and low-speed compression click adjusters with internal bump stop adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with 60 mm piston and 22 mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes spring seat with a 600 lb\/in front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper and black spring finish\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 21.83\u003cbr\u003e\nCollapsed Length (In): 16.80\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 554.4\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 19.05mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nCollapsed Length (Mm): 426.8\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-332238\u003cbr\u003e\nPart Number: 41-332238\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771208892525,"sku":"41332238","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-332238_2.jpg?v=1792219574"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-right-coilover-module-41-326725-for-ford-f-150","title":"Bilstein B8 8112 ZoneControl CR Front Right Coilover Module 41-326725 for Ford F-150","description":"B8 8112 (ZoneControl CR) - Front Right Corner Module\n\u003cp\u003eUpgrade the front suspension of your 2015–2023 Ford F-150 with the Bilstein B8 8112 ZoneControl CR front right corner module, part number 41-326725. Designed as a direct-fit coilover shock for light trucks, this position-sensitive system delivers responsive control during everyday driving while managing larger suspension inputs with confidence. The ZoneControl CR design uses a triple-piston configuration to provide three stages of compression damping and two stages of rebound damping, helping the suspension respond according to its position in the travel range.\u003cbr\u003eThe Bilstein B8 8112 coilover features a monotube internal design, a smooth steel body, and a remote reservoir that helps increase cooling capacity during demanding use. An anodized, bolt-on reservoir chassis mount is included for a secure installation. The threaded spring seat allows ride-height adjustment from 0 to 3.8 inches, depending on the application, while the included black spring uses a 500-pound-per-inch front main spring rate. The damper is finished in EVO Gray and uses a non-adjustable damping configuration for consistent performance.\u003cbr\u003eThis front right Bilstein ZoneControl CR module includes a special upper mount, crossbar lower mount, and spring seat. Aftermarket upper control arms are required for installation, and a boot is not included. The assembly is engineered for the listed Ford F-150 applications and is intended for drivers seeking improved ride control, suspension response, and performance over varied terrain. Verify vehicle fitment and installation requirements before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design for controlled damping across varying suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir included for improved cooling during demanding operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat provides 0–3.8 inches of application-dependent ride-height adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube coilover construction with a smooth steel body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Gray damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e500-pound-per-inch front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and crossbar lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAftermarket upper control arms required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit front right corner module for select 2015–2023 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 23.22\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 468.7\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nExtended Length (Mm): 589.8\u003cbr\u003e\nCollapsed Length (In): 18.45\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 500 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nAaiaid Part Number: BBGL41-326725\u003cbr\u003e\nPart Number: 41-326725\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771210137709,"sku":"41326725","price":1160.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326725_7.jpg?v=1792219594"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-coilover-module-41-326350","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Coilover Module 41-326350","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eUpgrade the front suspension of your compatible light truck or SUV with the Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module, part number 41-326350. Designed as a direct-fit position-sensitive coilover shock, this module combines controlled ride comfort for everyday driving with enhanced stability over demanding terrain. It is engineered for select 2004-2008 Lexus GX470, 2004-2008 Toyota 4Runner, and 2007 Toyota FJ Cruiser applications.\u003c\/p\u003e\n\u003cp\u003eBilstein ZoneControl CR technology uses three independent pistons to provide three compression zones and two rebound zones. The Dual Speed Adjustability system features click adjusters for independent high- and low-speed compression tuning, while the adjustable internal hydraulic bump stop, or JCO, helps manage larger suspension inputs. A threaded spring seat provides application-dependent ride-height adjustment, and the included remote reservoir helps increase cooling capacity during extended or demanding use.\u003c\/p\u003e\n\u003cp\u003eThis complete coilover module includes the spring seat, front main spring, remote reservoir, and bolt-on anodized reservoir chassis mount. Its monotube internal design, steel body, smooth-body construction, and EVO Grey damper finish are built for consistent performance and durability. The module uses a special upper mount and eye-style lower mount, making proper vehicle fitment verification essential before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Compatible with select 2004-2008 Lexus GX470 models, 2004-2008 Toyota 4Runner models, and 2007 Toyota FJ Cruiser models. Confirm vehicle configuration and suspension application before ordering. \u003cstrong\u003eCalifornia Proposition 65:\u003c\/strong\u003e WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit front right corner coilover module for select Lexus GX470, Toyota 4Runner, and Toyota FJ Cruiser applications\u003c\/li\u003e\n\u003cli\u003eZoneControl CR position-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\n\u003cli\u003eDual Speed Adjustability with click adjusters for high- and low-speed compression\u003c\/li\u003e\n\u003cli\u003eAdjustable internal hydraulic bump stop, also known as JCO\u003c\/li\u003e\n\u003cli\u003eRemote reservoir for improved cooling during demanding driving conditions\u003c\/li\u003e\n\u003cli\u003eThreaded spring seat for application-dependent ride-height adjustment\u003c\/li\u003e\n\u003cli\u003eMonotube internal design with steel smooth-body construction\u003c\/li\u003e\n\u003cli\u003eIncludes spring seat, front main spring, remote reservoir, and reservoir chassis mount\u003c\/li\u003e\n\u003cli\u003eSpecial upper mount and eye-style lower mount\u003c\/li\u003e\n\u003cli\u003eBilstein part number 41-326350\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-326350\u003cbr\u003e\nPart Number: 41-326350\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771213512813,"sku":"41326350","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326350_2.jpg?v=1792219613"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-left-coilover-module-41-326343","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Left Coilover Module 41-326343","description":"B8 8112 (ZoneControl CR DSA+) - Front Left Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR DSA+ Front Left Corner Module, part number 41-326343, is a direct-fit, position-sensitive coilover shock engineered for light trucks and SUVs. Designed for compatible Lexus GX470, Toyota 4Runner, and Toyota FJ Cruiser applications, this front suspension module combines everyday ride comfort with precise control during demanding off-road driving and large suspension inputs. The smooth-body coilover uses a durable steel construction, monotube internal design, and EVO Gray damper finish with a black spring.\u003cbr\u003eZoneControl CR technology uses three independent pistons to provide three stages of compression damping and two stages of rebound damping. Click adjusters provide separate high- and low-speed compression tuning, while the internal JCO hydraulic bump stop helps manage harsh bottoming events. This Dual Speed Adjustable system allows drivers to refine suspension response for changing terrain, vehicle loads, and driving conditions without replacing components.\u003cbr\u003eThe coilover includes a remote reservoir to improve cooling and maintain consistent damping performance during extended use, along with a bolt-on anodized reservoir chassis mount. Its threaded spring seat enables application-dependent ride-height adjustment up to 3 inches. The module includes the spring seat and uses a 600-pound-per-inch front main spring rate. The 14.1 mm eye lower mount and special upper mount are designed for direct-fit installation on the specified vehicle applications. Professional installation and alignment are recommended after installation.\u003cbr\u003eThis Bilstein B8 8112 assembly has an extended length of 22.24 inches and a collapsed length of 17.43 inches. It is supplied without a boot and is intended for the front left corner position. A California Proposition 65 warning applies: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 41-326343\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8112 ZoneControl CR DSA+\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePosition: Front left corner module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Compatible with select Lexus GX470, Toyota 4Runner, and Toyota FJ Cruiser models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Direct-fit smooth-body coilover shock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Position-sensitive design with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustment: Click adjusters for high- and low-speed compression plus internal JCO hydraulic bump stop\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Remote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height: Threaded spring seat with application-dependent adjustment up to 3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Steel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Rate: 600 pounds per inch front main spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 14.1 mm eye\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Gray damper with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-326343\u003cbr\u003e\nPart Number: 41-326343\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771214987373,"sku":"41326343","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326343_3.jpg?v=1792219632"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-corner-module-41-326275-for-toyota-4runner-and-fj-cruiser","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module 41-326275 for Toyota 4Runner and FJ Cruiser","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module, part number 41-326275, is a direct-fit, 3-way adjustable coilover shock designed for select Toyota 4Runner and FJ Cruiser applications. Built for light trucks and SUVs, this front suspension module combines position-sensitive damping with user-adjustable compression control to deliver refined road manners and confident handling over demanding terrain. The smooth-body monotube design uses a 2.65-inch shock body and a 60 mm piston for consistent damping performance and improved heat management.\u003cbr\u003eBilstein ZoneControl CR technology uses three independent pistons to provide three compression zones and two rebound zones. Click adjusters allow precise adjustment of both high- and low-speed compression, while the internal hydraulic bump stop, or JCO, helps control harsh suspension inputs near full compression. The included remote reservoir supports additional cooling capacity during extended off-road use and includes a bolt-on anodized chassis mount for secure installation. The threaded spring seat provides ride-height adjustment from 0 to 3 inches, depending on the application, and the spring seat and front coil spring are included.\u003cbr\u003eDesigned for the front right corner, this Bilstein B8 8112 module features a 600 lb\/in front main spring rate, 22.24-inch extended length, and 17.43-inch collapsed length. It includes a special upper mount and 14.1 mm eye-style lower mount, with a 22 mm shaft and durable steel body. The EVO Grey damper and black spring finish provide a functional, professional appearance. This module is engineered for select 2011-2017 Toyota FJ Cruiser and 2012-2017 Toyota 4Runner models; verify vehicle configuration and side-specific fitment before ordering. California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 41-326275\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8112 ZoneControl CR DSA+\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front right corner module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Direct-fit, 3-way adjustable monotube coilover shock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Position-sensitive design with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustability: High- and low-speed compression click adjusters with internal hydraulic bump stop adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Remote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height: Threaded spring seat with 0 to 3 inches of adjustment, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring: Included 600 lb\/in front main spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody: 2.65-inch smooth steel body with 60 mm piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Special upper mount and 14.1 mm eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel Range: 17.43-inch collapsed length and 22.24-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Grey damper with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2011-2017 Toyota FJ Cruiser and 2012-2017 Toyota 4Runner models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-326275\u003cbr\u003e\nPart Number: 41-326275\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771223867501,"sku":"41326275","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326275_2.jpg?v=1792219652"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-corner-module-41-326251","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module 41-326251","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eUpgrade the front suspension of your light truck or SUV with the Bilstein B8 8112 ZoneControl CR DSA+ front right corner module, part number 41-326251. Designed as a direct-fit coilover shock assembly, this position-sensitive system combines controlled ride comfort for everyday driving with precise suspension control over demanding terrain. Its smooth-body monotube design uses a durable steel construction and a 2.65-inch shock body for consistent performance under varied loads and driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe ZoneControl CR system uses three independent pistons to provide three compression zones and two rebound zones. Dual Speed Adjustability allows separate tuning of low- and high-speed compression through convenient click adjusters, while the internal JCO adjustable hydraulic bump stop helps manage harsh suspension inputs. A remote reservoir improves cooling capacity during extended or aggressive use and includes a bolt-on anodized chassis mount for secure installation.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein B8 8112 coilover module includes a threaded spring seat for application-dependent ride-height adjustment of up to 3 inches, along with a 600-pound-per-inch front main spring. The special upper mount and 14.1-millimeter eye lower mount support a direct-fit installation on the specified application. The EVO Grey damper and black spring finish provide a clean, durable appearance, while the 60-millimeter piston and 22-millimeter shaft are engineered for dependable suspension response.\u003c\/p\u003e\n\u003cp\u003ePart number 41-326251 is intended for the front right corner and fits select 2012–2016 Lexus GX460 and 2012–2016 Toyota 4Runner models. Verify vehicle configuration and application details before ordering. Professional installation and alignment are recommended after suspension work.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit front right corner coilover module for select Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\n\u003cli\u003eBilstein B8 8112 ZoneControl CR DSA+ position-sensitive damping technology\u003c\/li\u003e\n\u003cli\u003eThree compression zones and two rebound zones controlled by independent pistons\u003c\/li\u003e\n\u003cli\u003eClick adjusters for separate low- and high-speed compression tuning\u003c\/li\u003e\n\u003cli\u003eAdjustable internal JCO hydraulic bump stop\u003c\/li\u003e\n\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\n\u003cli\u003eThreaded spring seat with application-dependent ride-height adjustment up to 3 inches\u003c\/li\u003e\n\u003cli\u003eSmooth-body monotube design with a 2.65-inch body and 60-millimeter piston\u003c\/li\u003e\n\u003cli\u003e600-pound-per-inch front main spring with black finish\u003c\/li\u003e\n\u003cli\u003eEVO Grey damper finish and durable steel body construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-326251\u003cbr\u003e\nPart Number: 41-326251\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771235860589,"sku":"41326251","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326251_1.jpg?v=1792219676"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-left-corner-module-41-326244","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Left Corner Module 41-326244","description":"B8 8112 (ZoneControl CR DSA+) - Front Left Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR DSA+ front left corner module, part number 41-326244, is a direct-fit adjustable coilover system engineered for light trucks and SUVs. This smooth-body monotube coilover combines position-sensitive damping with independent adjustment for low- and high-speed compression, allowing drivers to fine-tune suspension performance for daily driving, demanding trails, and changing terrain. The module includes a threaded spring seat for application-specific ride-height adjustment and a 600 lb\/in front main spring.\u003cbr\u003eZoneControl CR technology uses a triple-piston design with three compression zones and two rebound zones. This position-sensitive setup helps provide controlled, comfortable damping during normal suspension movement while delivering additional support during larger impacts. Click adjusters provide precise control over high- and low-speed compression, while the internal JCO hydraulic bump stop can be adjusted to help manage suspension travel near full compression. The included remote reservoir increases oil capacity and cooling performance, and the bolt-on anodized reservoir mount provides a secure installation solution.\u003cbr\u003eThis Bilstein B8 8112 module features an EVO Grey damper finish, black spring, steel body construction, a 60mm piston, and a 22mm shaft. It is designed with a special upper mount and an eye-style lower mount. The front left corner module is compatible with select 2012-2016 Lexus GX460 and Toyota 4Runner applications; verify vehicle fitment and suspension configuration before ordering. Professional installation is recommended, and alignment should be checked after installation or ride-height changes. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front left corner coilover module for select Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl CR position-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDual Speed Adjustability with click controls for high- and low-speed compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable internal JCO hydraulic bump stop for improved control near full compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount for increased cooling capacity\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat for application-specific ride-height adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with a 60mm piston and 22mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600 lb\/in front main spring with black finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish and steel body construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 ZoneControl CR DSA+ series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-326244\u003cbr\u003e\nPart Number: 41-326244\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771238973549,"sku":"41326244","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326244_10.jpg?v=1792219695"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-right-coilover-module-41-324165","title":"Bilstein B8 8112 ZoneControl CR Front Right Coilover Module 41-324165","description":"B8 8112 (ZoneControl CR) - Front Right Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR front right corner module, part number 41-324165, is a direct-fit position-sensitive coilover designed for select light trucks and SUVs, including the 2012–2016 Lexus GX460 and 2012–2016 Toyota 4Runner. This complete module combines a monotube steel damper, coil spring, threaded spring seat, and remote reservoir to deliver controlled handling and improved ride comfort across changing terrain and suspension loads. Its smooth-body coilover construction and special upper mount are engineered for dependable installation and performance.\u003cbr\u003eZoneControl CR technology uses a triple-piston design with three independent compression zones and two rebound zones. This position-sensitive damping system automatically adjusts control according to suspension position, helping provide comfortable everyday driving characteristics while maintaining control during larger suspension inputs. The remote reservoir increases fluid capacity and cooling performance, while the included bolt-on anodized reservoir mount supports secure chassis installation. Damping is non-adjustable, and the system does not include a protective boot.\u003cbr\u003eThe threaded spring seat allows ride-height adjustment from 0 to 3.8 inches, depending on the vehicle application. The module includes a 600-pound-per-inch front main spring, with optional heavy-load springs available under Bilstein part numbers 53-291387 and 53-332837. The damper features a 60 mm piston, 22 mm shaft, 14.1 mm eye-style lower mount, and EVO Grey damper finish with a black spring. Its extended length is 22.80 inches and its collapsed length is 17.99 inches. Professional installation and application verification are recommended before purchase. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit Bilstein B8 8112 ZoneControl CR front right corner module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design with three independent pistons\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir for increased cooling capacity and consistent performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat with application-dependent ride-height adjustment from 0 to 3.8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600-pound-per-inch front main spring included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube steel damper with 60 mm piston and 22 mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body coilover design with special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14.1 mm eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select 2012–2016 Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional heavy-load springs available: 53-291387 and 53-332837\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nFinish: Dampers: EVO Grey \/ Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 579.1\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nCollapsed Length (Mm): 456.9\u003cbr\u003e\nCollapsed Length (In): 17.99\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-324165\u003cbr\u003e\nPart Number: 41-324165\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771243495533,"sku":"41324165","price":1160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-324165_2.jpg?v=1792219712"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-left-coilover-module-part-41-324158","title":"Bilstein B8 8112 ZoneControl CR Front Left Coilover Module, Part 41-324158","description":"B8 8112 (ZoneControl CR) - Front Left Corner Module\n\u003cp\u003eUpgrade the front suspension of your light truck or SUV with the Bilstein B8 8112 ZoneControl CR front left corner module, part number 41-324158. Designed as a direct-fit coilover shock, this module combines position-sensitive damping with adjustable ride height and a remote reservoir for improved cooling during demanding driving conditions. It is engineered for select 2012–2016 Lexus GX460 and Toyota 4Runner applications.\u003cbr\u003eThe ZoneControl CR system uses a triple-piston design with three independent compression zones and two rebound zones. This progressive damping technology helps provide controlled response over large suspension inputs while maintaining ride comfort during everyday driving. The monotube internal design, steel smooth body, and 60 mm piston provide consistent performance across changing terrain and suspension movement.\u003cbr\u003eThis Bilstein B8 8112 coilover features a threaded spring seat with ride-height adjustability from 0 to 3.8 inches, depending on the application. The front main spring rate is 600 pounds per inch, and the module includes a spring seat and remote reservoir with a bolt-on anodized chassis mount. The damper is non-adjustable and finished in EVO Grey, while the included spring is black. The lower mount uses a 14.1 mm eyelet, and the special upper mount is designed for application-specific installation. Optional heavy-load springs 53-291387 and 53-332837 are available for select setups.\u003cbr\u003eCompatible applications include the 2012–2016 Lexus GX460 and 2012–2016 Toyota 4Runner, subject to vehicle configuration and suspension requirements. Verify application details before ordering. This product may expose you to chemicals identified by California Proposition 65 as causing cancer or reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 ZoneControl CR front left corner coilover module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 41-324158\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design for select Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design with three independent pistons\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir for increased cooling capacity\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat with 0–3.8-inch ride-height adjustability, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with a 60 mm piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600-pound-per-inch front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteel smooth-body coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes spring seat and bolt-on anodized reservoir chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14.1 mm eyelet lower mount and special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional heavy-load springs 53-291387 and 53-332837\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 579.1\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nCollapsed Length (In): 17.99\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey \/ Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 456.9\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-324158\u003cbr\u003e\nPart Number: 41-324158\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771245494381,"sku":"41324158","price":1160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-324158_2.jpg?v=1792219735"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-coilover-module-41-319581-for-toyota-tacoma","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Coilover Module 41-319581 for Toyota Tacoma","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eUpgrade the front suspension of your 2012–2021 Toyota Tacoma with the Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module, part number 41-319581. This direct-fit coilover shock is engineered for light trucks and SUVs, combining position-sensitive damping with user-adjustable compression and rebound control. Its monotube design, steel body, and EVO Grey damper finish provide consistent performance and durability for daily driving, towing, spirited road use, and demanding off-road conditions.\u003c\/p\u003e\n\u003cp\u003eThe ZoneControl CR system uses three independent pistons to create three compression zones and two rebound zones, helping the suspension respond appropriately to both small road imperfections and large suspension inputs. Click adjusters provide precise high- and low-speed compression tuning, while the internal hydraulic bump stop, or JCO, adds adjustable control near full compression. The included remote reservoir improves heat management during extended or aggressive use and comes with a bolt-on anodized chassis mount for secure installation.\u003c\/p\u003e\n\u003cp\u003eThis front right coilover module includes a threaded spring seat for ride-height adjustment from 0 to 3 inches, depending on the application, along with a 600-pound-per-inch main spring and included spring seat. It features a 2.65-inch shock body, 60 mm piston, 22 mm shaft, eye-style lower mount, and special upper mount. Aftermarket upper control arms are required, and optional heavy-load springs are available separately under Bilstein spring numbers 53-291387 and 53-332837. The assembly does not include a protective boot.\u003c\/p\u003e\n\u003cp\u003eBilstein B8 8112 ZoneControl CR DSA+ coilovers deliver a balance of everyday ride comfort and highly controlled suspension response. Designed for direct fitment on compatible Toyota Tacoma applications from 2012 through 2021, this front right module is a strong choice for drivers who need adjustable performance across changing terrain and load conditions. Professional installation and alignment are recommended after installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit Bilstein B8 8112 ZoneControl CR DSA+ front right corner module\u003c\/li\u003e\n\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\n\u003cli\u003eClick adjusters for high- and low-speed compression tuning\u003c\/li\u003e\n\u003cli\u003eAdjustable internal hydraulic bump stop, also known as JCO\u003c\/li\u003e\n\u003cli\u003eMonotube coilover design with a 2.65-inch steel shock body\u003c\/li\u003e\n\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\n\u003cli\u003eThreaded spring seat with 0–3-inch ride-height adjustment, depending on application\u003c\/li\u003e\n\u003cli\u003e600-pound-per-inch front main spring included\u003c\/li\u003e\n\u003cli\u003e60 mm piston and 22 mm shaft\u003c\/li\u003e\n\u003cli\u003eEye-style lower mount with special upper mount\u003c\/li\u003e\n\u003cli\u003eAftermarket upper control arms required\u003c\/li\u003e\n\u003cli\u003eFits 2012–2021 Toyota Tacoma applications\u003c\/li\u003e\n\u003cli\u003eOptional heavy-load springs available separately: 53-291387 and 53-332837\u003c\/li\u003e\n\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nExtended Length (Mm): 568.8\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nExtended Length (In): 22.39\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 15.88mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nCollapsed Length (In): 17.42\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL41-319581\u003cbr\u003e\nPart Number: 41-319581\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013\u003cbr\u003e\nToyota Tacoma  2014\u003cbr\u003e\nToyota Tacoma  2015\u003cbr\u003e\nToyota Tacoma  2016\u003cbr\u003e\nToyota Tacoma  2017\u003cbr\u003e\nToyota Tacoma  2018\u003cbr\u003e\nToyota Tacoma  2019\u003cbr\u003e\nToyota Tacoma  2020\u003cbr\u003e\nToyota Tacoma  2021\u003cbr\u003e\nToyota Tacoma  2022\u003cbr\u003e\nToyota Tacoma  2023","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771249819757,"sku":"41319581","price":1460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-319581_1.jpg?v=1792219753"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-left-corner-module-41-319574-for-toyota-tacoma","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Left Corner Module 41-319574 for Toyota Tacoma","description":"B8 8112 (ZoneControl CR DSA+) - Front Left Corner Module\n\u003cp\u003eUpgrade the front suspension of your Toyota Tacoma with the Bilstein B8 8112 ZoneControl CR DSA+ Front Left Corner Module, part number 41-319574. Designed as a direct-fit coilover shock for light trucks and SUVs, this position-sensitive system combines daily driving comfort with precise control over demanding suspension inputs. The smooth-body monotube design uses a durable steel body, EVO Grey damper finish, black spring, remote reservoir, and bolt-on anodized reservoir mount for improved cooling during extended use.\u003c\/p\u003e\n\u003cp\u003eBilstein ZoneControl CR technology uses three independent pistons to provide three stages of compression damping and two stages of rebound damping based on suspension position. The click adjusters provide independent high- and low-speed compression adjustment, while the adjustable JCO internal hydraulic bump stop helps manage harsh impacts and large suspension movements. A threaded spring seat allows ride-height adjustment from 0 to 3 inches, depending on vehicle application. The included spring seat and 600-pound-per-inch front main spring support controlled performance across varied terrain.\u003c\/p\u003e\n\u003cp\u003eThis Front Left Corner Module includes a 2.65-inch body, 60 mm piston, 22 mm shaft, eye-style lower mount, special upper mount, and remote reservoir. Aftermarket upper control arms are required for installation, and optional heavy-load springs are available separately under Bilstein spring part numbers 53-291387 and 53-332837. The assembly is intended for the listed Toyota Tacoma applications from 2012 through 2021. Verify vehicle configuration, suspension setup, and left-front fitment before ordering. Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit Bilstein B8 8112 ZoneControl CR DSA+ front left corner module\u003c\/li\u003e\n\u003cli\u003ePart number 41-319574\u003c\/li\u003e\n\u003cli\u003eFits select 2012-2021 Toyota Tacoma applications\u003c\/li\u003e\n\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\n\u003cli\u003eClick adjusters for independent high- and low-speed compression control\u003c\/li\u003e\n\u003cli\u003eAdjustable JCO internal hydraulic bump stop\u003c\/li\u003e\n\u003cli\u003eThreaded spring seat supports 0-3 inches of ride-height adjustment, depending on application\u003c\/li\u003e\n\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\n\u003cli\u003eMonotube coilover design with smooth steel body\u003c\/li\u003e\n\u003cli\u003e60 mm piston and 22 mm shaft\u003c\/li\u003e\n\u003cli\u003e600-pound-per-inch front main spring included\u003c\/li\u003e\n\u003cli\u003eAftermarket upper control arms required\u003c\/li\u003e\n\u003cli\u003eOptional heavy-load springs: 53-291387 and 53-332837\u003c\/li\u003e\n\u003cli\u003eEVO Grey dampers with black springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 15.88mm\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nExtended Length (Mm): 568.8\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 22.39\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-319574\u003cbr\u003e\nPart Number: 41-319574\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013\u003cbr\u003e\nToyota Tacoma  2014\u003cbr\u003e\nToyota Tacoma  2015\u003cbr\u003e\nToyota Tacoma  2016\u003cbr\u003e\nToyota Tacoma  2017\u003cbr\u003e\nToyota Tacoma  2018\u003cbr\u003e\nToyota Tacoma  2019\u003cbr\u003e\nToyota Tacoma  2020\u003cbr\u003e\nToyota Tacoma  2021\u003cbr\u003e\nToyota Tacoma  2022\u003cbr\u003e\nToyota Tacoma  2023","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771252572269,"sku":"41319574","price":1460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-319574_1.jpg?v=1792219773"},{"product_id":"bilstein-b8-8112-black-hawk-rear-right-corner-module-41-314333-for-ford-bronco","title":"Bilstein B8 8112 Black Hawk Rear Right Corner Module 41-314333 for Ford Bronco","description":"B8 8112 Black Hawk - Rear Right Corner Module\n\u003cp\u003eUpgrade the rear suspension of your Ford Bronco with the Bilstein B8 8112 Black Hawk rear right corner module, part number 41-314333. Designed as a direct-fit solution for select 2021–2026 Ford Bronco models, this coilover assembly delivers controlled performance on paved roads, rugged trails, and varying load conditions. The B8 8112 Black Hawk series combines advanced damping technology with durable construction for drivers who demand responsive handling and a smooth, composed ride.\u003c\/p\u003e\n\u003cp\u003eThe module uses a large aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve heat dissipation during demanding use. Bilstein ZoneControl® position-sensitive damping helps reduce harsh bottoming while maintaining comfort over smaller impacts. Three external damping adjustments provide independent high- and low-speed compression tuning, while the internal bump stop adds further control through the suspension travel range. Click adjusters make it easier to tailor the rear suspension to driving conditions, terrain, and vehicle load.\u003c\/p\u003e\n\u003cp\u003eFinished with EVO Grey dampers and a black spring, this smooth-body coilover includes a spring seat and a special upper mount configuration. The lower eye mount uses a 1-inch mounting interface with Heim spacers, and the assembly features a 60 mm piston, 22 mm shaft, and a 288 lb\/in rear main spring rate. The reservoir is finned aluminum, and the design is intended for light-truck applications. No boot is included. This Bilstein B8 8112 Black Hawk corner module is engineered to provide the adjustability, durability, and suspension control needed for serious Ford Bronco use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2021–2026 Ford Bronco. This product contains a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBilstein B8 8112 Black Hawk rear right corner module\u003c\/li\u003e\n\u003cli\u003ePart number 41-314333\u003c\/li\u003e\n\u003cli\u003eDirect-fit application for select 2021–2026 Ford Bronco models\u003c\/li\u003e\n\u003cli\u003eAluminum shock body with finned aluminum remote reservoir\u003c\/li\u003e\n\u003cli\u003eZoneControl® position-sensitive damping technology\u003c\/li\u003e\n\u003cli\u003eHigh- and low-speed compression click adjusters\u003c\/li\u003e\n\u003cli\u003eInternal bump stop for enhanced bottoming control\u003c\/li\u003e\n\u003cli\u003e60 mm piston and 22 mm shaft\u003c\/li\u003e\n\u003cli\u003eSmooth-body coilover design\u003c\/li\u003e\n\u003cli\u003eEVO Grey damper with black spring\u003c\/li\u003e\n\u003cli\u003eSpring seat included\u003c\/li\u003e\n\u003cli\u003eLower eye mount with 1-inch interface and Heim spacers\u003c\/li\u003e\n\u003cli\u003e288 lb\/in rear main spring rate\u003c\/li\u003e\n\u003cli\u003eBoot not included\u003c\/li\u003e\n\u003cli\u003eLight-truck suspension application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 26.60\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 674.6\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 25.4mm with Heim Spacers\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 288\u003cbr\u003e\nCollapsed Length (Mm): 467.1\u003cbr\u003e\nCollapsed Length (In): 18.40\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-314333\u003cbr\u003e\nPart Number: 41-314333\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771258929261,"sku":"41314333","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-314333_1.jpg?v=1792219792"},{"product_id":"bilstein-b8-8112-black-hawk-rear-left-corner-module-41-314326-for-ford-bronco","title":"Bilstein B8 8112 Black Hawk Rear Left Corner Module 41-314326 for Ford Bronco","description":"B8 8112 Black Hawk - Rear Left Corner Module\n\u003cp\u003eUpgrade the rear suspension of your Ford Bronco with the Bilstein B8 8112 Black Hawk Rear Left Corner Module, part number 41-314326. Designed as a direct-fit solution for select 2021–2026 Ford Bronco models, this high-performance coilover combines advanced damping control, durable construction, and trail-ready versatility. It is engineered to deliver controlled handling on paved roads, rugged trails, and under varying load conditions.\u003cbr\u003eThe Bilstein B8 8112 Black Hawk features a smooth aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve cooling during demanding driving. Its monotube internal design and large piston support consistent damping performance, while ZoneControl® position-sensitive damping helps reduce harsh bottoming and maintain a composed ride over smaller impacts. The integrated internal bump stop further expands suspension control through challenging terrain.\u003cbr\u003eThree external damping adjustments provide independent high- and low-speed compression tuning, allowing drivers to tailor suspension response to vehicle setup, cargo, and driving conditions. The coilover includes a spring seat and uses a special upper mount with an eye-style lower mount and Heim spacers. EVO Gray dampers and black springs provide a functional, professional appearance suited to the Bilstein B8 8112 Black Hawk series.\u003cbr\u003eThis Bilstein rear left corner module is intended for light-truck applications and fits 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. Professional installation is recommended, followed by proper suspension setup and alignment. California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit rear left corner module for select 2021–2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eB8 8112 Black Hawk series coilover with monotube internal design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum shock body with finned aluminum remote reservoir for increased oil capacity and cooling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl® position-sensitive damping helps reduce harsh bottoming\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThree-way damping adjustment with high- and low-speed compression clickers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal adjustable bump stop for enhanced suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included with black coil spring and EVO Gray damper finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and eye-style lower mount with Heim spacers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e22 mm shaft and 60 mm piston for consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for light-truck use on paved roads and rugged trails\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nExtended Length (Mm): 674.6\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 25.4mm with Heim Spacers\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 26.60\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 467.1\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 288\u003cbr\u003e\nCollapsed Length (In): 18.40\u003cbr\u003e\nAaiaid Part Number: BBGL41-314326\u003cbr\u003e\nPart Number: 41-314326\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771259650157,"sku":"41314326","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-314326_1.jpg?v=1792219811"},{"product_id":"bilstein-b8-8112-black-hawk-front-right-corner-module-41-314227-for-ford-bronco","title":"Bilstein B8 8112 Black Hawk Front Right Corner Module 41-314227 for Ford Bronco","description":"B8 8112 Black Hawk - Front Right Corner Module\n\u003cp\u003eUpgrade the front right suspension of your Ford Bronco with the Bilstein B8 8112 Black Hawk 3-way adjustable coilover corner module, part number 41-314227. Designed as a direct-fit solution for 2021–2026 Ford Bronco models, this light-truck suspension component combines durable construction, advanced damping control, and a carefully matched spring setup for confident performance on paved roads and rugged trails. The front main spring is rated at 400 pounds per inch, and the included spring seat helps simplify installation.\u003cbr\u003eThe B8 8112 Black Hawk uses a large 2.65-inch aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve heat dissipation during demanding driving. Its monotube internal design and 60 mm piston support consistent damping performance, while the 22 mm shaft provides strength for off-road use. EVO Gray dampers and black springs create a functional, understated finish suitable for a wide range of vehicle builds.\u003cbr\u003eBilstein’s ZoneControl® position-sensitive damping system manages compression and rebound behavior across changing suspension positions, helping reduce harsh bottoming while maintaining controlled response over smaller impacts. Click adjusters provide separate high- and low-speed compression tuning, and the internal bump stop adds another layer of bottoming control. The assembly features a smooth-body coilover design, crossbar lower mount, special upper mount, and remote reservoir configuration. Aftermarket upper control arms are required for installation. This module is intended for the front right corner and does not include a protective boot.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8112 Black Hawk\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 41-314227\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front right corner module for 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Smooth-body adjustable coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustment: High- and low-speed compression click adjusters with internal bump stop\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping Technology: ZoneControl® position-sensitive compression and rebound control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum with finned remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 22 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Rate: 400 pounds per inch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Crossbar lower mount with special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Control Arms: Aftermarket upper arms required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Gray dampers with black springs\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 594.7\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nExtended Length (In): 23.40\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nCollapsed Length (Mm): 446.2\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nCollapsed Length (In): 17.59\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 400\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nAaiaid Part Number: BBGL41-314227\u003cbr\u003e\nPart Number: 41-314227\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771262402669,"sku":"41314227","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-314227_6.jpg?v=1792219837"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-right-corner-coilover-module-41-284551","title":"Bilstein B8 8112 ZoneControl CR Front Right Corner Coilover Module 41-284551","description":"B8 8112 (ZoneControl CR) - Front Right Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR front right corner module, part number 41-284551, is a direct-fit position-sensitive coilover shock designed for light trucks and SUVs. Its smooth-body monotube construction uses a 2.65-inch body and a 60 mm piston to provide consistent damping performance, improved heat control, and reliable suspension control during daily driving and demanding off-road use. The zinc-plated damper and black spring finish provide durable protection in a range of driving environments.\u003cbr\u003eZoneControl CR technology uses a triple-piston design with three independent compression zones and two rebound zones. This position-sensitive damping system automatically adjusts suspension response according to shock position and input severity, helping deliver a controlled, comfortable ride over smaller irregularities while providing additional support during larger suspension movements. The non-adjustable damping design is calibrated for dependable performance without manual tuning.\u003cbr\u003eThis Bilstein B8 8112 coilover module includes a remote reservoir for increased cooling capacity and a bolt-on anodized reservoir chassis mount. A threaded spring seat allows ride-height adjustment from 0 to 3.8 inches, depending on the application, while the included spring seat and 650 lb\/in front main spring support the intended suspension setup. The module features a special upper mount, eye-style lower mount, 22 mm shaft, and steel body construction. Aftermarket upper control arms are required for installation, and the assembly does not include a protective boot. Professional installation and application verification are recommended.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front right corner coilover module for applicable light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 ZoneControl CR position-sensitive damping system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with smooth steel body construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat with application-dependent ride-height adjustment from 0 to 3.8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e650 lb\/in front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping calibrated for controlled street and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated damper with black spring finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAftermarket upper control arms required for installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 41-284551\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nOptional Heavy Load Springs: N\/A\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nCollapsed Length (In): 19.43\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 16.1mm\u003cbr\u003e\nExtended Length (In): 25.79\u003cbr\u003e\nCollapsed Length (Mm): 493.6\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nExtended Length (Mm): 655.1\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 650 lbs\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-284551\u003cbr\u003e\nPart Number: 41-284551\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771263484013,"sku":"41284551","price":1091.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-284551_1.jpg?v=1792219856"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-left-coilover-shock-module-41-284544","title":"Bilstein B8 8112 ZoneControl CR Front Left Coilover Shock Module 41-284544","description":"B8 8112 (ZoneControl CR) - Front Left Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR front left corner module is a direct-fit position-sensitive coilover shock designed for select light trucks and SUVs. Part number 41-284544 combines Bilstein’s advanced damping technology with a smooth-body coilover design, providing improved ride comfort during everyday driving and confident control over large suspension inputs. This module includes a remote reservoir to help increase cooling capacity and an anodized, bolt-on chassis mount for secure installation.\u003cbr\u003eBilstein ZoneControl CR technology uses three independent pistons to deliver three stages of compression damping and two stages of rebound damping. This position-sensitive design automatically adapts damping performance based on suspension travel, helping the vehicle remain composed across changing road conditions without relying on externally adjustable damping. The monotube construction and 60-millimeter piston provide consistent performance, while the zinc-plated damper body and black spring offer durable service in demanding environments.\u003cbr\u003eThe threaded spring seat allows ride-height adjustment from 0 to 3.8 inches, depending on vehicle application, making it easier to tailor suspension setup and clearance requirements. The coilover is supplied with a 650-pound-per-inch front spring, special upper mount, eye-style lower mount, and integrated spring seat. Aftermarket upper control arms are required for installation. Verify vehicle compatibility, corner position, suspension configuration, and application-specific adjustment range before ordering. The manufacturer’s warning states: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front left corner coilover module for select light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl CR position-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThree independent piston design for controlled damping throughout suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount for improved cooling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat provides ride-height adjustment from 0 to 3.8 inches, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with a 60-millimeter piston and 22-millimeter shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes a 650-pound-per-inch front main spring and spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with zinc-plated damper and black spring finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and 16.1-millimeter eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAftermarket upper control arms are required\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 25.79\u003cbr\u003e\nCollapsed Length (In): 19.43\u003cbr\u003e\nExtended Length (Mm): 655.1\u003cbr\u003e\nOptional Heavy Load Springs: N\/A\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 16.1mm\u003cbr\u003e\nCollapsed Length (Mm): 493.6\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 650 lbs\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-284544\u003cbr\u003e\nPart Number: 41-284544\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771263582317,"sku":"41284544","price":1091.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-284544_1.jpg?v=1792219873"},{"product_id":"bilstein-b6-performance-front-suspension-strut-assembly-35-110736","title":"Bilstein B6 Performance Front Suspension Strut Assembly 35-110736","description":"B6 Performance - Suspension Strut Assembly\n\u003cp\u003eUpgrade your vehicle’s handling and safety with the Bilstein B6 Performance Suspension Strut Assembly, part number 35-110736. Designed as a direct performance upgrade for original equipment dampers, this strut is engineered to work with factory springs, including the original series spring, without requiring a spring replacement. Its application-specific valving helps improve control, steering response, and overall driving confidence while preserving practical street performance.\u003cbr\u003eThe Bilstein B6 Performance strut uses a monotube internal design for consistent damping performance and efficient heat dissipation during demanding driving conditions. A fixed spring seat and bracket-style lower mount provide secure installation, while the stem-style upper mount supports compatibility with the specified applications. The assembly features Bilstein’s signature yellow-painted finish and is rigorously tested to meet or exceed original equipment quality standards. The boot is not included, so verify the installation requirements for your vehicle before ordering.\u003cbr\u003eThis Bilstein 35-110736 strut assembly is designed for select 2004–2013 Mazda 3, 2004–2005 Volvo S40, 2012–2013 Volvo C30, and 2012–2013 Volvo C70 applications. Confirm vehicle year, make, model, and position before purchase to ensure proper fitment. Extended travel is approximately 19.90 inches, while collapsed travel is approximately 15.55 inches. This product may require a specific installation orientation or additional components depending on the vehicle application. Prop 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 35-110736\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B6 Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select 2004–2013 Mazda 3, 2004–2005 Volvo S40, 2012–2013 Volvo C30, and 2012–2013 Volvo C70 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance Upgrade: Improves handling and safety without requiring new springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube construction for consistent damping and heat management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included, fixed design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Bracket style\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem style\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: Approximately 19.90 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: Approximately 15.55 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 505.5\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nExtended Length (In): 19.90\u003cbr\u003e\nSegment: Tuning\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nSpring Seat Included: Yes - Fixed\u003cbr\u003e\nLower Mount Type: Bracket\u003cbr\u003e\nSeries: B6 Performance\u003cbr\u003e\nCollapsed Length (Mm): 395.0\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 15.55\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nAaiaid Part Number: BBGL35-110736\u003cbr\u003e\nPart Number: 35-110736\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nMazda 3  2004\u003cbr\u003e\nMazda 3  2005\u003cbr\u003e\nMazda 3  2006\u003cbr\u003e\nMazda 3  2007\u003cbr\u003e\nMazda 3  2008\u003cbr\u003e\nMazda 3  2009\u003cbr\u003e\nMazda 3  2010\u003cbr\u003e\nMazda 3  2011\u003cbr\u003e\nMazda 3  2012\u003cbr\u003e\nMazda 3  2013\u003cbr\u003e\nVolvo C30  2008\u003cbr\u003e\nVolvo C30  2009\u003cbr\u003e\nVolvo C30  2010\u003cbr\u003e\nVolvo C30  2011\u003cbr\u003e\nVolvo C30  2012\u003cbr\u003e\nVolvo C30  2013\u003cbr\u003e\nVolvo C70  2006\u003cbr\u003e\nVolvo C70  2007\u003cbr\u003e\nVolvo C70  2008\u003cbr\u003e\nVolvo C70  2009\u003cbr\u003e\nVolvo C70  2010\u003cbr\u003e\nVolvo C70  2011\u003cbr\u003e\nVolvo C70  2012\u003cbr\u003e\nVolvo C70  2013\u003cbr\u003e\nVolvo S40  2004\u003cbr\u003e\nVolvo S40  2005\u003cbr\u003e\nVolvo S40  2006\u003cbr\u003e\nVolvo S40  2007\u003cbr\u003e\nVolvo S40  2008\u003cbr\u003e\nVolvo S40  2009\u003cbr\u003e\nVolvo S40  2010\u003cbr\u003e\nVolvo S40  2011\u003cbr\u003e\nVolvo V50  2005\u003cbr\u003e\nVolvo V50  2006\u003cbr\u003e\nVolvo V50  2007\u003cbr\u003e\nVolvo V50  2008\u003cbr\u003e\nVolvo V50  2009\u003cbr\u003e\nVolvo V50  2010\u003cbr\u003e\nVolvo V50  2011","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771268694125,"sku":"35110736","price":311.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/35-110736_1.jpg?v=1792219910"},{"product_id":"bilstein-b6-performance-suspension-strut-assembly-35-041382-for-ford-mustang","title":"Bilstein B6 Performance Suspension Strut Assembly 35-041382 for Ford Mustang","description":"B6 Performance - Suspension Strut Assembly\n\u003cp\u003eUpgrade your vehicle’s handling with the Bilstein B6 Performance suspension strut assembly, part number 35-041382. Designed as a performance improvement over original equipment dampers, this Bilstein strut is engineered to work with the factory spring while providing application-specific valving for more controlled handling, improved stability, and enhanced driving confidence. It is designed for select 1994–2004 Ford Mustang applications.\u003cbr\u003eBilstein B6 Performance dampers use a high-pressure gas monotube design to deliver consistent damping performance during daily driving and spirited use. The monotube internal design helps maintain responsive control, while rigorous testing supports quality that meets or exceeds original equipment standards. The upper stem mount and lower bracket mount provide application-specific installation, and the assembly is finished with Bilstein’s signature yellow paint for easy identification.\u003cbr\u003eThis suspension strut includes blue bellows for added protection and does not include a spring seat, making it suitable for vehicles using the original spring and related factory components. As part of Bilstein’s B6 Performance tuning series, part number 35-041382 is a dependable choice for drivers seeking sharper suspension response without switching to aftermarket lowering springs. Verify vehicle fitment and suspension configuration before installation. Prop 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 35-041382\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B6 Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select 1994–2004 Ford Mustang models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Type: Suspension strut assembly\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Bracket\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot Included: Blue bellows\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat Included: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTechnology: High-pressure gas\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Application-specific valving for improved handling and control\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nCollapsed Length (In): 15.98\u003cbr\u003e\nLower Mount Type: Bracket\u003cbr\u003e\nExtended Length (In): 21.42\u003cbr\u003e\nSegment: Tuning\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nBoot Included: Blue Bellows\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nExtended Length (Mm): 544.0\u003cbr\u003e\nSeries: B6 Performance\u003cbr\u003e\nCollapsed Length (Mm): 406.0\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nAaiaid Part Number: BBGL35-041382\u003cbr\u003e\nPart Number: 35-041382\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Mustang  1987\u003cbr\u003e\nFord Mustang  1988\u003cbr\u003e\nFord Mustang  1989\u003cbr\u003e\nFord Mustang  1990\u003cbr\u003e\nFord Mustang  1991\u003cbr\u003e\nFord Mustang  1992\u003cbr\u003e\nFord Mustang  1993\u003cbr\u003e\nFord Mustang  1994\u003cbr\u003e\nFord Mustang  1995\u003cbr\u003e\nFord Mustang  1996\u003cbr\u003e\nFord Mustang  1997\u003cbr\u003e\nFord Mustang  1998\u003cbr\u003e\nFord Mustang  1999\u003cbr\u003e\nFord Mustang  2000\u003cbr\u003e\nFord Mustang  2001\u003cbr\u003e\nFord Mustang  2002\u003cbr\u003e\nFord Mustang  2003\u003cbr\u003e\nFord Mustang  2004","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771269152877,"sku":"35041382","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/35-041382_1.jpg?v=1792219928"},{"product_id":"bilstein-b6-performance-strut-cartridge-34-181539-for-volvo-242-244-and-245","title":"Bilstein B6 Performance Strut Cartridge 34-181539 for Volvo 242, 244 and 245","description":"B6 Performance - Suspension Strut Cartridge\n\u003cp\u003eUpgrade your vehicle’s handling and safety with the Bilstein B6 Performance strut cartridge, part number 34-181539. Designed as a performance replacement for OE dampers, this shock absorber is engineered to work with the original factory spring, allowing you to improve suspension performance without replacing the spring. Its application-specific valving helps deliver controlled suspension response and a more confident driving experience while maintaining compatibility with the vehicle’s existing suspension setup.\u003cbr\u003eThe Bilstein B6 Performance uses a monotube internal design to provide consistent damping performance during demanding driving conditions. Each damper is rigorously tested to meet or exceed OE quality standards, helping ensure dependable operation and the renowned Bilstein level of durability. The yellow-painted finish provides the recognizable appearance associated with the B6 Performance series, while the included blue bellows boot helps protect the assembly from road debris and contamination.\u003cbr\u003eThis strut cartridge features a stem-style upper mount and base-cup lower mount. A spring seat is not included, so the original application components should be retained and verified before installation. The cartridge is designed for select Volvo applications, including 1975-1977 Volvo 245 models and 1976-1979 Volvo 242 and 244 models. Confirm vehicle fitment and suspension configuration before ordering. This product may contain a chemical known to the State of California to cause cancer or reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B6 Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 34-181539\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Performance upgrade for OE dampers using the factory spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Stem-style upper mount with base-cup lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Blue bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 18.56 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 23.58 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select 1975-1979 Volvo 242, 244 and 245 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nLower Mount Type: Base Cup\u003cbr\u003e\nSegment: Tuning\u003cbr\u003e\nCollapsed Length (In): 18.56\u003cbr\u003e\nSeries: B6 Performance\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nCollapsed Length (Mm): 471.5\u003cbr\u003e\nBoot Included: Blue Bellows\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nExtended Length (In): 23.58\u003cbr\u003e\nExtended Length (Mm): 599.0\u003cbr\u003e\nParttype: Strut Cartridge\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BBGL34-181539\u003cbr\u003e\nPart Number: 34-181539\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nVolvo 242  1975\u003cbr\u003e\nVolvo 242  1976\u003cbr\u003e\nVolvo 242  1977\u003cbr\u003e\nVolvo 242  1978\u003cbr\u003e\nVolvo 242  1979\u003cbr\u003e\nVolvo 242  1980\u003cbr\u003e\nVolvo 242  1981\u003cbr\u003e\nVolvo 242  1982\u003cbr\u003e\nVolvo 242  1983\u003cbr\u003e\nVolvo 242  1984\u003cbr\u003e\nVolvo 244  1975\u003cbr\u003e\nVolvo 244  1976\u003cbr\u003e\nVolvo 244  1977\u003cbr\u003e\nVolvo 244  1978\u003cbr\u003e\nVolvo 244  1979\u003cbr\u003e\nVolvo 244  1980\u003cbr\u003e\nVolvo 244  1981\u003cbr\u003e\nVolvo 244  1982\u003cbr\u003e\nVolvo 244  1983\u003cbr\u003e\nVolvo 244  1984\u003cbr\u003e\nVolvo 244  1985\u003cbr\u003e\nVolvo 244  1986\u003cbr\u003e\nVolvo 244  1987\u003cbr\u003e\nVolvo 244  1988\u003cbr\u003e\nVolvo 244  1989\u003cbr\u003e\nVolvo 245  1975\u003cbr\u003e\nVolvo 245  1976\u003cbr\u003e\nVolvo 245  1977\u003cbr\u003e\nVolvo 245  1978\u003cbr\u003e\nVolvo 245  1979\u003cbr\u003e\nVolvo 245  1980\u003cbr\u003e\nVolvo 245  1981\u003cbr\u003e\nVolvo 245  1982\u003cbr\u003e\nVolvo 245  1983\u003cbr\u003e\nVolvo 245  1984\u003cbr\u003e\nVolvo 245  1985\u003cbr\u003e\nVolvo 245  1986\u003cbr\u003e\nVolvo 245  1987\u003cbr\u003e\nVolvo 245  1988\u003cbr\u003e\nVolvo 245  1989\u003cbr\u003e\nVolvo 262  1976\u003cbr\u003e\nVolvo 262  1978\u003cbr\u003e\nVolvo 262  1979\u003cbr\u003e\nVolvo 262  1980\u003cbr\u003e\nVolvo 262  1981\u003cbr\u003e\nVolvo 264  1976\u003cbr\u003e\nVolvo 264  1977\u003cbr\u003e\nVolvo 264  1978\u003cbr\u003e\nVolvo 264  1979\u003cbr\u003e\nVolvo 264  1980\u003cbr\u003e\nVolvo 264  1981\u003cbr\u003e\nVolvo 264  1982\u003cbr\u003e\nVolvo 265  1976\u003cbr\u003e\nVolvo 265  1977\u003cbr\u003e\nVolvo 265  1978\u003cbr\u003e\nVolvo 265  1979\u003cbr\u003e\nVolvo 265  1980\u003cbr\u003e\nVolvo 265  1981","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771270889581,"sku":"34181539","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/34-181539_1.jpg?v=1792219946"},{"product_id":"bilstein-as2-r-series-triple-adjustable-suspension-shock-absorber-33-370101","title":"Bilstein AS2-R Series Triple-Adjustable Suspension Shock Absorber 33-370101","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eBilstein AS2-R Series Suspension Shock Absorber 33-370101 is engineered for demanding motorsports applications where precise damping control, low weight, and modular upgradeability are essential. This high-performance damper combines a clear-anodized aluminum body with a remote reservoir and tunable base-valve technology to provide a broad range of suspension tuning options. Its threaded body and coilover-compatible design allow the shock to be used with or without coilover hardware, helping racers configure suspension systems around specific vehicle and track requirements.\u003cbr\u003eThe AS2-R Series features triple-adjustable damping with independent rebound and high- and low-speed compression adjustment. This design enables detailed control of chassis response, traction, ride balance, and weight transfer across changing conditions. The monotube internal design uses a linear piston and a 46mm piston diameter for consistent damping performance, while the aluminum construction helps reduce unsprung weight. The remote reservoir supports increased oil capacity and improved heat management during extended competition use.\u003cbr\u003eBilstein part number 33-370101 includes a spring seat and uses 1\/2-inch Heim upper and lower mounts. Its threaded body screw-top coilover configuration is designed to maximize suspension travel and accommodate a wide range of spring and mounting combinations. The shock provides 3.56 inches of stroke with an extended length of 18.4 inches and a collapsed length of 14.84 inches. Pistons, piston bands, and Heim components are sold separately, allowing racers and builders to select upgrade combinations suited to their suspension setup. This shock absorber does not include a protective boot and carries a California Proposition 65 warning.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMotorsports-focused AS2-R Series suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-adjustable damping with rebound and high- and low-speed compression control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eClear-anodized aluminum body for lightweight performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with tunable base-valve technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with linear piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded body screw-top coilover configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e1\/2-inch Heim upper and lower mounting points\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e3.56-inch stroke for responsive suspension tuning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length of 18.4 inches and collapsed length of 14.84 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePistons, piston bands, and Heim components sold separately for modular upgrades\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtective boot not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSpring Hardware: B4-MKT-0001A00\u003cbr\u003e\nSpring Hardware 2: E4-MSG-0096A00\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (Mm): 376.9\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (In): 18.4\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nSpring Hardware 3: B4-MKT-0008A00\u003cbr\u003e\nExtended Length (Mm): 467.4\u003cbr\u003e\nStroke\/Travel Length (In): 3.56\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Linear\u003cbr\u003e\nStroke\/Travel Length (Mm): 90.4\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (In): 14.84\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Triple Adjustable - Rebound and High and Low Speed Compression\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-370101\u003cbr\u003e\nPart Number: 33-370101\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271053421,"sku":"33370101","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_82653775-5f10-4a24-a78e-5155fd5b6301.jpg?v=1792219963"},{"product_id":"bilstein-as2-r-series-motorsport-suspension-shock-absorber-33-366883","title":"Bilstein AS2-R Series Motorsport Suspension Shock Absorber 33-366883","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2-R Series Suspension Shock Absorber, part number 33-366883, is engineered for demanding motorsports applications where precise suspension control and flexible tuning are essential. Its aluminum-bodied remote reservoir uses tunable base valve technology and is paired with a lightweight AS2 Series modular shock body to help maximize suspension travel and damper performance. The threaded body is compatible with coilover hardware, making it suitable for a range of racing suspension configurations.\u003cbr\u003eThis Bilstein shock absorber features a monotube internal design, aluminum construction, a clear anodized finish, and a two-port linear piston. Upper and lower mounting points use 1\/2-inch heim joints for secure installation and reliable articulation under competition conditions. The included spring seat and compatible spring hardware support coilover-style setups, while the modular architecture allows racers to tailor upgrade combinations as needed. Pistons, piston bands, and heim components are sold separately, providing additional flexibility for custom suspension builds.\u003cbr\u003eThe AS2-R Series damper is valved with the LRB BVT BIL0 identifier and is designed for championship-level tuning applications. This version provides non-adjustable damping and does not include a protective boot. With an extended length of 25.92 inches and a collapsed length of 16.98 inches, it delivers a broad operating range for suspension travel. The Bilstein 33-366883 is a specialized motorsports shock absorber for builders and racers seeking a modular, high-performance damper platform with dependable construction and precise fitment requirements. Prop 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMotorsports-focused AS2-R Series suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein part number 33-366883\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum threaded body with clear anodized finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with tunable base valve technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo-port linear piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e1\/2-inch heim upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoilover-compatible threaded body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14 mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46 mm piston diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length: 25.92 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length: 16.98 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving identifier: LRB BVT BIL0\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nValving Identifier: LRB BVT BIL0\u003cbr\u003e\nSpring Hardware 2: E4-MSG-0083A00\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Two Port Linear\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (In): 16.98\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nExtended Length (In): 25.92\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSpring Hardware: B4-MKT-0010A00\u003cbr\u003e\nExtended Length (Mm): 658.3\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (Mm): 431.3\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-366883\u003cbr\u003e\nPart Number: 33-366883\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271184493,"sku":"33366883","price":999.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_5dc46d12-51a2-4191-aa60-25f42248791f.jpg?v=1792219980"},{"product_id":"bilstein-as2-series-33-356990-non-adjustable-monotube-suspension-shock-absorber","title":"Bilstein AS2 Series 33-356990 Non-Adjustable Monotube Suspension Shock Absorber","description":"AS2 Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2 Series 33-356990 suspension shock absorber is engineered for motorsports applications where lightweight construction, precise setup, and future upgrade capability are important. Its modular aluminum design supports a rebuildable configuration, while the threaded body enables accurate ride-height adjustment in coilover applications. The monotube internal design provides consistent damping performance and efficient heat dissipation during demanding track use.\u003cbr\u003eThe shock absorber features a clear anodized aluminum body and a linear piston design intended for dependable operation in competition environments. Its non-adjustable damping configuration delivers a focused setup for racers who want the performance benefits of the AS2 platform without external damping adjustments. The screw-top coilover body is designed to work with compatible coilover components, while the spring seat is not included.\u003cbr\u003eThe Bilstein 33-356990 uses a clevis lower mount and a 1\/2-inch Teflon heim upper mount for motorsports installation flexibility. It provides 3.93 inches of stroke and is designed with a 46 mm piston and 14 mm shaft. Pistons, piston bands, heims, and other modular components are sold separately, allowing the system to be configured for specific racing requirements. This shock absorber is a suitable choice for racers seeking a durable, serviceable, and tunable suspension platform.\u003cbr\u003eWARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: AS2 Series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Motorsports suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Threaded body screw-top coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Clear anodized\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Type: Linear\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel: 3.93 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: 1\/2-inch Teflon heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Clevis\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRebuildable Design: Modular components support service and upgrade options\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 384.1\u003cbr\u003e\nLower Mount Type: Clevis\u003cbr\u003e\nStroke\/Travel Length (In): 3.93\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nSeries: AS2 Series\u003cbr\u003e\nPiston Type: Linear\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nStroke\/Travel Length (Mm): 100.0\u003cbr\u003e\nUpper Mount Type: 1\/2in teflon heim\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (Mm): 284.1\u003cbr\u003e\nCollapsed Length (In): 11.19\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nExtended Length (In): 15.12\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-356990\u003cbr\u003e\nPart Number: 33-356990\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271250029,"sku":"33356990","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_4aefd7db-f778-49ac-8b43-9fda7d9736b3.jpg?v=1792219993"},{"product_id":"bilstein-as2-r-series-triple-adjustable-suspension-shock-absorber-33-337999","title":"Bilstein AS2-R Series Triple-Adjustable Suspension Shock Absorber 33-337999","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2-R Series Suspension Shock Absorber, part number 33-337999, is engineered for demanding motorsports applications where precise damping control and suspension performance are essential. Its modular design combines a lightweight aluminum-bodied shock with a remote reservoir and tunable base valve technology, giving racers extensive control over vehicle response, grip, and suspension balance. The threaded body supports coilover configurations and includes a spring seat for flexible installation options.\u003cbr\u003eThe monotube internal design uses a 46mm piston and two-port linear piston configuration to provide consistent damping performance during intense use. Triple-adjustable damping allows independent tuning of rebound, high-speed compression, and low-speed compression characteristics. This broad adjustment range helps accommodate different track conditions, vehicle setups, driving styles, and suspension requirements while maximizing available travel. The clear-anodized aluminum body provides a durable, lightweight finish suited to competition environments.\u003cbr\u003eThis Bilstein AS2-R shock absorber features 1\/2-inch Heim upper and lower mounts, a 14mm shaft, and an 8.47-inch stroke. It extends to 24.38 inches and collapses to 15.91 inches, providing substantial suspension movement for performance applications. The unit is supplied without a protective boot, while pistons, piston bands, and Heim components are available separately to support future upgrades and custom damper configurations. Compatible spring hardware includes Bilstein part numbers B4-MKT-0001A00 and E4-MSG-0083A00. Professional installation and setup by a qualified suspension specialist are recommended.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: AS2-R Series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Motorsports suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: Triple adjustable for rebound, high-speed compression, and low-speed compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Threaded body screw-top coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote Reservoir: Aluminum reservoir with tunable base valve technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Type: Two-port linear\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: 1\/2-inch Heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: 1\/2-inch Heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel: 8.47 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 24.38 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 15.91 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Clear anodized\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Hardware: B4-MKT-0001A00 and E4-MSG-0083A00\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSpring Hardware: B4-MKT-0001A00\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (In): 15.91\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Triple Adjustable - Rebound and High and Low Speed Compression\u003cbr\u003e\nExtended Length (Mm): 619.3\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 24.38\u003cbr\u003e\nSpring Hardware 2: E4-MSG-0083A00\u003cbr\u003e\nStroke\/Travel Length (In): 8.47\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Two Port Linear\u003cbr\u003e\nStroke\/Travel Length (Mm): 215.1\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (Mm): 404.1\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-337999\u003cbr\u003e\nPart Number: 33-337999\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271348333,"sku":"33337999","price":1540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_57b7e18d-fc77-4af0-842a-fa0c390626e1.jpg?v=1792220010"},{"product_id":"bilstein-as2-r-series-triple-adjustable-motorsports-suspension-shock-absorber-33-337951","title":"Bilstein AS2-R Series Triple-Adjustable Motorsports Suspension Shock Absorber 33-337951","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2-R Series Suspension Shock Absorber, part number 33-337951, is engineered for demanding motorsports applications where precise damper control and reliable performance are essential. This premium shock absorber combines a lightweight aluminum AS2 modular shock body with a remote reservoir and tunable base valve technology, giving racers a broad range of setup and upgrade possibilities. Its threaded body design supports coilover configurations while also allowing use without coilover hardware, depending on the application.\u003cbr\u003eTriple-adjustable damping provides independent rebound, high-speed compression, and low-speed compression tuning to help optimize suspension behavior for changing track conditions, vehicle setups, and driving styles. The monotube internal design and digressive\/high-frequency linear IPP piston promote consistent damping response, improved heat management, and controlled suspension movement during high-performance driving. The 46 mm piston and 14 mm shaft are designed to deliver responsive control while maximizing available suspension travel.\u003cbr\u003eThe Bilstein 33-337951 features 1\/2-inch heim upper and lower mounts, a clear-anodized aluminum body, and a threaded screw-top coilover-style body design. It provides 9.12 inches of stroke travel, with an extended length of 26.26 inches and a collapsed length of 17.14 inches. A spring seat and protective boot are not included, allowing builders to select components that match their specific suspension requirements. Pistons, piston bands, and heim components are sold separately, supporting flexible configuration and future upgrades. This AS2-R Series shock absorber is a versatile choice for racers seeking championship-level tuning capability and modular performance from Bilstein.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: AS2-R Series motorsports suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: Triple adjustable for rebound, high-speed compression, and low-speed compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube construction for consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Lightweight aluminum with a clear-anodized finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Threaded body screw-top coilover design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Type: Digressive\/high-frequency linear IPP piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel Length: 9.12 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 26.26 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 17.14 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: 1\/2-inch heim upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 667.0\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (Mm): 435.4\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (In): 26.26\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nStroke\/Travel Length (In): 9.12\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Digressive\/HF Linear IPP\u003cbr\u003e\nStroke\/Travel Length (Mm): 234.7\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (In): 17.14\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Triple Adjustable - Rebound and High and Low Speed Compression\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-337951\u003cbr\u003e\nPart Number: 33-337951\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271643245,"sku":"33337951","price":1175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_2ccc8247-c81d-4a47-829b-a957732bf381.jpg?v=1792220033"},{"product_id":"bilstein-as2-r-series-triple-adjustable-motorsports-shock-absorber-33-337890","title":"Bilstein AS2-R Series Triple-Adjustable Motorsports Shock Absorber 33-337890","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2-R Series Suspension Shock Absorber, part number 33-337890, is engineered for demanding motorsports applications where precise suspension control and adaptable tuning are essential. Its aluminum-bodied remote reservoir uses tunable base valve technology and pairs with an AS2 Series aluminum modular shock body to provide a versatile platform for racers and performance builders. The threaded body design supports coilover applications and can also be used without coilover hardware, helping accommodate a wide range of suspension configurations.\u003cbr\u003eThis Bilstein shock features a monotube internal design, linear piston, clear-anodized aluminum body, and triple-adjustable damping for independent rebound plus high- and low-speed compression control. These adjustment options allow suspension tuning for track conditions, vehicle setup, and driving style. The shock provides 4.79 inches of stroke and extends to 19.17 inches, while the 14 mm shaft and 46 mm piston support responsive damping performance and consistent control during demanding use.\u003cbr\u003eThe AS2-R Series damper includes a spring seat and is configured with 1\/2-inch Heim upper and lower mounts. Spring hardware options include Bilstein components B4-MKT-0001A00 and E4-MSG-0083A00. Pistons, piston bands, and Heim components are sold separately, allowing builders to select upgrade combinations that match their tuning requirements. With modular construction, substantial adjustment capability, and a design focused on maximizing suspension travel, Bilstein part number 33-337890 is a strong choice for competition vehicles requiring flexible, high-performance damper tuning. Boot is not included. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: AS2-R Series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Motorsports suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping Adjustment: Triple adjustable for rebound and high- and low-speed compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Threaded-body screw-top coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Clear anodized\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Type: Linear\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel: 4.79 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 14.38 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 19.17 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: 1\/2-inch Heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 1\/2-inch Heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Hardware: B4-MKT-0001A00\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdditional Spring Hardware: E4-MSG-0083A00\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-337890\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSpring Hardware: B4-MKT-0001A00\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (In): 14.38\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Triple Adjustable - Rebound and High and Low Speed Compression\u003cbr\u003e\nExtended Length (Mm): 486.9\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nSpring Hardware 2: E4-MSG-0083A00\u003cbr\u003e\nStroke\/Travel Length (In): 4.79\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Linear\u003cbr\u003e\nStroke\/Travel Length (Mm): 121.7\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (Mm): 365.3\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nExtended Length (In): 19.17\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-337890\u003cbr\u003e\nPart Number: 33-337890\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271708781,"sku":"33337890","price":1125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_bd608987-ed13-4057-bd9b-94dc7c3188d7.jpg?v=1792220044"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-318950-for-ford-f-150","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-318950 for Ford F-150","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 5100 suspension shock absorber, part number 33-318950. Designed as a direct-fit solution for select 2015–2024 Ford F-150 applications, this shock absorber is engineered to improve ride quality, handling, and comfort while maintaining dependable performance on changing road surfaces. Its application-specific tuning helps provide balanced control for light-truck use.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design with a velocity-sensitive, digressive piston. This configuration responds quickly to varying road conditions and helps deliver consistent, fade-free damping in demanding driving environments. The smooth-body construction, zinc-plated finish, and non-adjustable damping make this shock absorber a durable replacement or suspension upgrade for trucks requiring reliable control without external adjustment.\u003cbr\u003eThis Bilstein shock absorber features a 14mm shaft, 12mm eye mounts at the upper and lower attachment points, and a black bellows boot for added shaft protection. It has a travel length of 11.25 inches, a collapsed length of 18.22 inches, and an extended length of 29.47 inches. The shock is designed without a reservoir or spring seat and is intended for lifted truck applications. Verify vehicle configuration and suspension requirements before installation. Fits 2015–2024 Ford F-150 models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-318950\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension shock absorber for select lifted Ford F-150 trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: 12mm eye mount on upper and lower ends\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel Length: 11.25 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 18.22 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 29.47 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: 2015–2024 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 11.25\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 285.8\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 29.47\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 18.22\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nCollapsed Length (Mm): 462.8\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nExtended Length (Mm): 748.5\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nAaiaid Part Number: BBGL33-318950\u003cbr\u003e\nPart Number: 33-318950\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771272036461,"sku":"33318950","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-318950_2.jpg?v=1792220062"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-313146","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-313146","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck or SUV with the Bilstein B8 5100 suspension shock absorber, part number 33-313146. Designed as a direct-fit replacement for select Toyota FJ Cruiser, Toyota 4Runner, and Lexus GX460 applications, this Bilstein shock absorber is engineered to improve ride quality, handling, and comfort while maintaining consistent performance on changing road surfaces. Its application-specific tuning helps provide controlled suspension response for light-truck use.\u003cbr\u003eThe B8 5100 features a 46mm monotube design that delivers consistent, fade-resistant damping in demanding driving conditions. A velocity-sensitive, digressive piston responds quickly to road variations, helping the shock absorber maintain tire contact and suspension control over rough pavement, uneven terrain, and changing loads. The smooth-body construction and non-adjustable damping design provide dependable operation without requiring manual tuning.\u003cbr\u003eThis Bilstein shock absorber uses a zinc-plated finish for added durability and includes a black bellows boot to help protect the shaft from road debris. It is configured with an eye-style lower mount and stem-style upper mount for direct installation on compatible applications. The shock has a 14mm shaft, an approximately 14.91-inch collapsed length, an approximately 23.03-inch extended length, and 8.12 inches of suspension travel. It does not include a reservoir or spring seat. Fitment includes select 2011–2014 Toyota FJ Cruiser models, 2012–2014 Toyota 4Runner models, and 2012–2014 Lexus GX460 models. Verify vehicle configuration and suspension lift requirements before ordering. This product contains a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series suspension shock absorber for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 33-313146\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning helps improve ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish for durable corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style lower mount with stem-style upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApproximately 14.91-inch collapsed length and 23.03-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.12 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir or spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.3mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 14.91\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nCollapsed Length (Mm): 378.8\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nExtended Length (Mm): 585.0\u003cbr\u003e\nStroke\/Travel Length (In): 8.12\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 206.3\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 23.03\u003cbr\u003e\nAaiaid Part Number: BBGL33-313146\u003cbr\u003e\nPart Number: 33-313146\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771273543789,"sku":"33313146","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-313146_1.jpg?v=1792220080"},{"product_id":"bilstein-b8-5100-suspension-shock-absorber-33-306254-for-ford-f-250-and-f-350-super-duty","title":"Bilstein B8 5100 Suspension Shock Absorber 33-306254 for Ford F-250 and F-350 Super Duty","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 5100 suspension shock absorber, part number 33-306254. Designed as a direct-fit solution for select Ford F-250 and F-350 Super Duty applications, this light-truck shock absorber is vehicle-specifically tuned to support improved ride quality, handling, and comfort. It is suitable for 2017–2021 Ford Super Duty models listed below and provides dependable performance for demanding road and hauling conditions.\u003cbr\u003eThe B8 5100 uses a monotube internal design with a smooth-body construction to provide consistent, fade-resistant damping. Its velocity-sensitive, digressive piston responds quickly to changing road surfaces while helping maintain controlled suspension movement. The zinc-plated finish supports durability, while the included black bellows boot helps protect the shock shaft from dirt and road debris. This non-adjustable shock is engineered for reliable operation without the need for external damping adjustments.\u003cbr\u003eInstallation uses an eye-style upper mount with a 16 mm opening and an eye-style lower mount with a 14.1 mm opening. The shock features a 14 mm shaft and delivers 11.52 inches of stroke for suspension systems requiring a 20.08-inch collapsed length and 31.60-inch extended length. It does not include a spring seat or reservoir. This Bilstein B8 5100 shock absorber fits 2017–2021 Ford F-250 Super Duty and F-350 Super Duty models, subject to the vehicle's suspension configuration and application requirements. Professional installation is recommended. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit Bilstein B8 5100 shock absorber for select lifted Ford F-250 and F-350 Super Duty trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific tuning supports improved ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body construction with durable zinc-plated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no external adjustment required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included for added shaft protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper eye mount with 16 mm opening\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower eye mount with 14.1 mm opening\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14 mm shaft diameter and 11.52 inches of stroke\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e20.08-inch collapsed length and 31.60-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir and no spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2017–2021 Ford F-250 Super Duty and F-350 Super Duty applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 20.08\u003cbr\u003e\nUpper Mount Type: Eye 16mm\u003cbr\u003e\nCollapsed Length (Mm): 510.0\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nStroke\/Travel Length (In): 11.52\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 292.6\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nExtended Length (Mm): 802.7\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 31.60\u003cbr\u003e\nAaiaid Part Number: BBGL33-306254\u003cbr\u003e\nPart Number: 33-306254\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-250 Super Duty  2017\u003cbr\u003e\nFord F-250 Super Duty  2018\u003cbr\u003e\nFord F-250 Super Duty  2019\u003cbr\u003e\nFord F-250 Super Duty  2020\u003cbr\u003e\nFord F-250 Super Duty  2021\u003cbr\u003e\nFord F-250 Super Duty  2022\u003cbr\u003e\nFord F-250 Super Duty  2023\u003cbr\u003e\nFord F-250 Super Duty  2024\u003cbr\u003e\nFord F-250 Super Duty  2025\u003cbr\u003e\nFord F-250 Super Duty  2026\u003cbr\u003e\nFord F-350 Super Duty  2017\u003cbr\u003e\nFord F-350 Super Duty  2018\u003cbr\u003e\nFord F-350 Super Duty  2019\u003cbr\u003e\nFord F-350 Super Duty  2020\u003cbr\u003e\nFord F-350 Super Duty  2021\u003cbr\u003e\nFord F-350 Super Duty  2022\u003cbr\u003e\nFord F-350 Super Duty  2023\u003cbr\u003e\nFord F-350 Super Duty  2024\u003cbr\u003e\nFord F-350 Super Duty  2025\u003cbr\u003e\nFord F-350 Super Duty  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771273707629,"sku":"33306254","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-306254_1.jpg?v=1792220102"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-305288-for-2020-2026-jeep-gladiator","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-305288 for 2020-2026 Jeep Gladiator","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 5100 suspension shock absorber, part number 33-305288. Designed as a direct-fit solution for the 2020-2026 Jeep Gladiator, this light-truck shock absorber is tuned for the specific application to help improve ride quality, handling, and comfort on and off the road. The B8 5100 series is engineered for lifted vehicles and provides dependable control across changing driving conditions.\u003cbr\u003eThe 46mm monotube design helps deliver consistent, fade-free performance by maintaining efficient heat dissipation during demanding use. A velocity-sensitive, digressive piston responds rapidly to changing road surfaces, providing controlled damping over both small irregularities and larger impacts. This design helps the shock absorber maintain stable performance while supporting improved handling and a more composed ride.\u003cbr\u003eThe Bilstein B8 5100 features a smooth-body construction, zinc-plated finish, and non-adjustable damping calibrated for the Jeep Gladiator application. Eye-style upper and lower mounts support a direct-fit installation, while the included black bellows boot helps protect the shaft from road debris. The shock absorber has an extended length of 28.41 inches, a collapsed length of 17.91 inches, and 10.50 inches of stroke. It does not include a reservoir, spring seat, or coilover hardware. This product is intended for compatible lifted applications and carries a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension shock absorber for 2020-2026 Jeep Gladiator models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 light-truck shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-305288\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube construction for consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Design: Velocity-sensitive, digressive piston that adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable damping tuned for the specific vehicle application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Durable zinc-plated exterior\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Included black bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 10.50 inches of shock stroke\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 28.41 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 17.91 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: No external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 721.7\u003cbr\u003e\nStroke\/Travel Length (In): 10.50\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 266.7\u003cbr\u003e\nCollapsed Length (Mm): 455.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 17.91\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 28.41\u003cbr\u003e\nAaiaid Part Number: BBGL33-305288\u003cbr\u003e\nPart Number: 33-305288\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Gladiator  2020\u003cbr\u003e\nJeep Gladiator  2021\u003cbr\u003e\nJeep Gladiator  2022\u003cbr\u003e\nJeep Gladiator  2023\u003cbr\u003e\nJeep Gladiator  2024\u003cbr\u003e\nJeep Gladiator  2025\u003cbr\u003e\nJeep Gladiator  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771273805933,"sku":"33305288","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-305288_1.jpg?v=1792220120"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-305226-for-jeep-gladiator","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-305226 for Jeep Gladiator","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted Jeep Gladiator with the Bilstein B8 5100 suspension shock absorber, part number 33-305226. Designed as a direct-fit solution for select 2020–2026 Jeep Gladiator applications, this light-truck shock absorber is engineered to improve ride quality, handling, and driving comfort on changing road surfaces. Its zinc-plated finish provides durable protection for long-term use.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design to deliver consistent, fade-free performance under demanding driving conditions. A velocity-sensitive, digressive piston responds to variations in road input, helping maintain controlled suspension movement both on and off the road. Application-specific tuning ensures the shock absorber is matched to the vehicle for balanced performance and dependable handling.\u003cbr\u003eThis non-adjustable, smooth-body shock absorber features eye-style upper and lower mounts, a black bellows boot, and a 14mm shaft. It provides approximately 11.05 inches of stroke and is designed without a reservoir or spring seat. The direct-fit configuration supports straightforward installation when used with the appropriate vehicle suspension setup. Verify vehicle application and suspension lift requirements before ordering.\u003cbr\u003eFeature: 46mm monotube internal design for consistent, fade-free performance\u003cbr\u003eFeature: Velocity-sensitive, digressive piston for responsive damping control\u003cbr\u003eFeature: Application-specific tuning for improved ride quality and handling\u003cbr\u003eFeature: Direct-fit design for select 2020–2026 Jeep Gladiator models\u003cbr\u003eFeature: Eye-style upper and lower mounts with 14mm shaft\u003cbr\u003eFeature: Zinc-plated smooth body with black bellows boot\u003cbr\u003eFeature: Non-adjustable damping with no external reservoir or spring seat\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube internal design for consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston for responsive damping control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning for improved ride quality and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design for select 2020–2026 Jeep Gladiator models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts with 14mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated smooth body with black bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no external reservoir or spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 18.33\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nCollapsed Length (Mm): 465.5\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nStroke\/Travel Length (In): 11.05\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 280.7\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nExtended Length (Mm): 746.2\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 29.38\u003cbr\u003e\nAaiaid Part Number: BBGL33-305226\u003cbr\u003e\nPart Number: 33-305226\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Gladiator  2020\u003cbr\u003e\nJeep Gladiator  2021\u003cbr\u003e\nJeep Gladiator  2022\u003cbr\u003e\nJeep Gladiator  2023\u003cbr\u003e\nJeep Gladiator  2024\u003cbr\u003e\nJeep Gladiator  2025\u003cbr\u003e\nJeep Gladiator  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771274461293,"sku":"33305226","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-305226_1.jpg?v=1792220137"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-305219-for-2020-2026-jeep-gladiator","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-305219 for 2020-2026 Jeep Gladiator","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your Jeep Gladiator with the Bilstein B8 5100 suspension shock absorber, part number 33-305219. Designed as a direct-fit solution for lifted trucks and SUVs, this shock absorber is engineered to improve ride quality, handling, and driving comfort. It fits the 2020, 2021, 2022, 2023, 2024, 2025, and 2026 Jeep Gladiator, providing application-specific tuning for dependable performance on and off the road.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design that helps deliver consistent, fade-free damping in changing driving conditions. Its velocity-sensitive, digressive piston responds quickly to variations in the road surface, helping maintain tire contact and controlled suspension movement. The smooth-body construction is zinc plated for durability, while the black bellows boot helps protect the shock shaft from dirt and debris.\u003cbr\u003eThis Bilstein shock absorber features non-adjustable damping, no external reservoir, and eye-style upper and lower mounts. It has a 14mm shaft, a 46mm piston, and a suspension travel range of 9.81 inches. The unit is designed for lifted-vehicle applications and does not include a spring seat. A Prop 65 warning applies: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov.\u003cbr\u003eFeature: Bilstein B8 5100 series suspension shock absorber\u003cbr\u003eFeature: Direct-fit application for 2020-2026 Jeep Gladiator\u003cbr\u003eFeature: 46mm monotube construction for consistent, fade-free performance\u003cbr\u003eFeature: Velocity-sensitive, digressive piston for responsive damping\u003cbr\u003eFeature: Non-adjustable damping with smooth-body design\u003cbr\u003eFeature: Zinc-plated finish for added corrosion resistance\u003cbr\u003eFeature: Black bellows boot included\u003cbr\u003eFeature: Eye-style upper and lower mounts\u003cbr\u003eFeature: No external reservoir and no spring seat\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit application for 2020-2026 Jeep Gladiator\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube construction for consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston for responsive damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with smooth-body design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish for added corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir and no spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 26.88\u003cbr\u003e\nExtended Length (Mm): 682.7\u003cbr\u003e\nStroke\/Travel Length (In): 9.81\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 249.2\u003cbr\u003e\nCollapsed Length (Mm): 433.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nLower Mount Type: Eye 12.8mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 17.07\u003cbr\u003e\nUpper Mount Type: Eye 12.8mm\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nAaiaid Part Number: BBGL33-305219\u003cbr\u003e\nPart Number: 33-305219\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Gladiator  2020\u003cbr\u003e\nJeep Gladiator  2021\u003cbr\u003e\nJeep Gladiator  2022\u003cbr\u003e\nJeep Gladiator  2023\u003cbr\u003e\nJeep Gladiator  2024\u003cbr\u003e\nJeep Gladiator  2025\u003cbr\u003e\nJeep Gladiator  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771274559597,"sku":"33305219","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-305219_1.jpg?v=1792220155"},{"product_id":"bilstein-b8-5100-suspension-shock-absorber-33-292977-for-2018-2026-jeep-wrangler","title":"Bilstein B8 5100 Suspension Shock Absorber 33-292977 for 2018-2026 Jeep Wrangler","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted Jeep Wrangler with the Bilstein B8 5100 suspension shock absorber, part number 33-292977. Designed as a direct-fit solution for lifted trucks and SUVs, this Bilstein shock absorber is tuned for the specific application to help provide improved ride quality, handling, and comfort. It fits 2018 through 2026 Jeep Wrangler models and is engineered for light-truck use.\u003cbr\u003eThe B8 5100 features a 46mm monotube internal design that delivers consistent, fade-free performance in demanding driving conditions. Its velocity-sensitive, digressive piston responds quickly to changing road surfaces, helping maintain controlled damping over rough terrain, highway transitions, and varied suspension movement. The smooth-body, non-coilover construction is designed for dependable operation without an external reservoir or adjustable damping.\u003cbr\u003eThis Bilstein shock absorber uses eye-style upper and lower mounts with 12.8mm mounting specifications, a 14mm shaft, and a zinc-plated finish for added durability. The shock provides approximately 12.19 inches of travel between its compressed and extended positions. A boot and spring seat are not included. Professional installation is recommended, and suspension components should be inspected before installation to confirm compatibility with the vehicle’s lift height and existing hardware. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5100 suspension shock absorber engineered for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit replacement for 2018-2026 Jeep Wrangler models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube construction for consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Design: Velocity-sensitive digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Eye-style upper and lower mounts with 12.8mm specifications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable damping tuned for the specific vehicle application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc-plated finish for durable service\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: Approximately 12.19 inches of stroke\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded Components: Shock absorber only; boot and spring seat are not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: No external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Information: California Proposition 65 warning for cancer and reproductive harm\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nUpper Mount Type: Eye 12.8mm\u003cbr\u003e\nCollapsed Length (Mm): 495.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nLower Mount Type: Eye 12.8mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 19.49\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 309.6\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (Mm): 804.7\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 31.68\u003cbr\u003e\nStroke\/Travel Length (In): 12.19\u003cbr\u003e\nAaiaid Part Number: BBGL33-292977\u003cbr\u003e\nPart Number: 33-292977\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Wrangler  2018\u003cbr\u003e\nJeep Wrangler  2019\u003cbr\u003e\nJeep Wrangler  2020\u003cbr\u003e\nJeep Wrangler  2021\u003cbr\u003e\nJeep Wrangler  2022\u003cbr\u003e\nJeep Wrangler  2023\u003cbr\u003e\nJeep Wrangler  2024\u003cbr\u003e\nJeep Wrangler  2025\u003cbr\u003e\nJeep Wrangler  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771274756205,"sku":"33292977","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-292977_1.jpg?v=1792220184"},{"product_id":"bilstein-b8-5100-33-292632-monotube-suspension-shock-absorber","title":"Bilstein B8 5100 33-292632 Monotube Suspension Shock Absorber","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck or SUV with the Bilstein B8 5100 33-292632 suspension shock absorber. Designed as a direct-fit solution for select 2018–2026 Jeep Wrangler applications, this light-truck shock is tuned for its specific vehicle application to help improve ride quality, handling, and overall comfort. Its smooth-body construction is engineered for reliable performance without a coilover design.\u003cbr\u003eThe 46mm monotube internal design helps maintain consistent, fade-resistant damping in demanding driving conditions. A velocity-sensitive, digressive piston responds quickly to changing road surfaces, providing controlled suspension movement during both everyday driving and more aggressive off-road use. Non-adjustable damping delivers application-specific calibration without requiring manual setup, while the zinc-plated finish adds durability and corrosion resistance.\u003cbr\u003eThe Bilstein B8 5100 33-292632 features eye-style upper and lower mounting points with 12.8mm openings, a 14mm shaft, and a black bellows boot for added shaft protection. It has an extended length of 29.38 inches, a collapsed length of 18.33 inches, and 11.05 inches of stroke. This shock absorber does not include a reservoir or spring seat and is intended for applications requiring a non-coilover replacement shock. Professional installation is recommended. California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-292632\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension shock absorber for select lifted light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2018–2026 Jeep Wrangler\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: 46mm monotube with velocity-sensitive, digressive piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Upper and lower eye mounts with 12.8mm openings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 29.38 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 18.33 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 11.05 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable, application-specific tuning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 12.8mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nUpper Mount Type: Eye 12.8mm\u003cbr\u003e\nCollapsed Length (Mm): 465.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 29.38\u003cbr\u003e\nStroke\/Travel Length (In): 11.05\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nCollapsed Length (In): 18.33\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 280.7\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (Mm): 746.2\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-292632\u003cbr\u003e\nPart Number: 33-292632\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Wrangler  2018\u003cbr\u003e\nJeep Wrangler  2019\u003cbr\u003e\nJeep Wrangler  2020\u003cbr\u003e\nJeep Wrangler  2021\u003cbr\u003e\nJeep Wrangler  2022\u003cbr\u003e\nJeep Wrangler  2023\u003cbr\u003e\nJeep Wrangler  2024\u003cbr\u003e\nJeep Wrangler  2025\u003cbr\u003e\nJeep Wrangler  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771274887277,"sku":"33292632","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-292632_1.jpg?v=1792220201"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-292625","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-292625","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck or SUV with the Bilstein B8 5100 suspension shock absorber, part number 33-292625. Designed as a direct-fit solution for select 2018–2026 Jeep Wrangler applications, this shock absorber is tuned for specific vehicle configurations to support improved ride quality, handling, and comfort. Its application-focused design helps maintain controlled suspension movement on changing road surfaces.\u003cbr\u003eThe 46mm monotube design provides consistent, fade-resistant performance by helping manage heat during demanding driving conditions. A velocity-sensitive, digressive piston responds quickly to road inputs while allowing the shock to adapt as suspension demands change. The smooth-body construction is non-coilover and uses non-adjustable damping for dependable operation without manual tuning. A zinc-plated finish supports durability, while the included black bellows boot helps protect the shaft from road debris.\u003cbr\u003eThis Bilstein B8 5100 shock absorber uses eye-style upper and lower mounts with 12.8mm mounting specifications and is built with a 14mm shaft. It has a 9.81-inch stroke and is designed without a reservoir or spring seat. The shock absorber is intended for light-truck applications and fits select 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, and 2026 Jeep Wrangler models. Verify vehicle configuration and suspension lift requirements before installation. California Proposition 65 Warning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 suspension shock absorber for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-292625\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: 46mm monotube construction for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: Velocity-sensitive, digressive piston for responsive suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Eye-style upper and lower mounts with 12.8mm mounting specifications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft: 14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 9.81 inches of stroke\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtection: Includes black bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: No external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select 2018–2026 Jeep Wrangler models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 12.8mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 17.07\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 249.2\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (Mm): 682.7\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 26.88\u003cbr\u003e\nStroke\/Travel Length (In): 9.81\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nUpper Mount Type: Eye 12.8mm\u003cbr\u003e\nCollapsed Length (Mm): 433.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-292625\u003cbr\u003e\nPart Number: 33-292625\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Wrangler  2018\u003cbr\u003e\nJeep Wrangler  2019\u003cbr\u003e\nJeep Wrangler  2020\u003cbr\u003e\nJeep Wrangler  2021\u003cbr\u003e\nJeep Wrangler  2022\u003cbr\u003e\nJeep Wrangler  2023\u003cbr\u003e\nJeep Wrangler  2024\u003cbr\u003e\nJeep Wrangler  2025\u003cbr\u003e\nJeep Wrangler  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277049965,"sku":"33292625","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-292625_1.jpg?v=1792220224"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-256764-for-2014-ford-f-150","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-256764 for 2014 Ford F-150","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted 2014 Ford F-150 with the Bilstein B8 5100 shock absorber, part number 33-256764. Designed as a direct-fit solution for lifted trucks and SUVs, this light-truck shock absorber is tuned for the specific application to help deliver improved ride quality, handling, and comfort. Its zinc-plated finish and smooth-body construction provide dependable performance for demanding driving conditions.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design for consistent, fade-resistant damping performance in changing conditions. A velocity-sensitive, digressive piston responds quickly to variations in road surfaces, helping the shock maintain controlled wheel movement over both rough terrain and paved roads. The non-adjustable damping configuration is calibrated for the application, eliminating the need for manual tuning while providing balanced suspension control.\u003cbr\u003eThis Bilstein shock absorber features 12mm eye-style upper and lower mounts, a 14mm shaft, and a black bellows boot for added shaft protection. It has no reservoir, spring seat, or coilover hardware, making it a straightforward replacement for compatible factory suspension components. The shock provides approximately 11.22 inches of travel, with a collapsed length of 17.52 inches and an extended length of 28.77 inches. Verify vehicle application and suspension lift requirements before installation. This product fits the 2014 Ford F-150.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension shock absorber for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2014 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Velocity-sensitive, digressive piston with non-adjustable tuning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: 12mm eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: Approximately 11.22 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: Approximately 17.52 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: Approximately 28.77 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-256764\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nStroke\/Travel Length (In): 11.22\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nCollapsed Length (In): 17.52\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nStroke\/Travel Length (Mm): 285.0\u003cbr\u003e\nCollapsed Length (Mm): 445.0\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 730.7\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nExtended Length (In): 28.77\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nAaiaid Part Number: BBGL33-256764\u003cbr\u003e\nPart Number: 33-256764\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277148269,"sku":"33256764","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-256764_1.jpg?v=1792220241"},{"product_id":"bilstein-b6-4600-suspension-shock-absorber-33-256740-for-2014-ford-f-150","title":"Bilstein B6 4600 Suspension Shock Absorber 33-256740 for 2014 Ford F-150","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your 2014 Ford F-150 with the Bilstein B6 4600 shock absorber, part number 33-256740. Designed as a direct-fit replacement for the original equipment shock on stock-height light trucks, this Bilstein shock absorber helps improve ride quality, handling, and overall driving comfort without requiring a lifted or modified suspension. It is engineered specifically for the application to deliver balanced performance across a range of road conditions.\u003cbr\u003eThe B6 4600 uses a 46mm monotube design for consistent, fade-resistant damping in demanding driving conditions. Its velocity-sensitive, digressive piston responds quickly to changing road surfaces, helping maintain controlled wheel movement and improved stability. The non-adjustable damping is application-tuned by Bilstein for dependable performance, while the smooth-body construction is suitable for standard suspension installations without a coilover spring seat or external reservoir.\u003cbr\u003eThis Bilstein shock absorber features 12mm eye-style upper and lower mounts, a 14mm shaft, and a durable yellow-painted finish. A blue bellows boot is included to help protect the shaft from road debris and contaminants. With an extended length of 28.74 inches and a collapsed length of 17.52 inches, the unit is designed for the specified vehicle application. This shock absorber fits the 2014 Ford F-150 and is intended for light-truck use. Installation should be completed using appropriate service procedures and vehicle-specific hardware requirements. California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning improves ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e12mm eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm piston shaft with durable yellow-painted finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlue bellows boot included for shaft protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with smooth-body construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo spring seat or external reservoir included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2014 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nCollapsed Length (In): 17.52\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nCollapsed Length (Mm): 445.0\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nBoot Included: Blue Bellows\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 730.0\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 28.74\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-256740\u003cbr\u003e\nPart Number: 33-256740\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277312109,"sku":"33256740","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-256740_1.jpg?v=1792220258"},{"product_id":"bilstein-b8-5100-front-shock-absorber-33-255057-for-ford-f-150","title":"Bilstein B8 5100 Front Shock Absorber 33-255057 for Ford F-150","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your compatible Ford F-150 with the Bilstein B8 5100 shock absorber, part number 33-255057. Designed as a direct-fit solution for lifted trucks and sport utility vehicles, this light-truck shock absorber is tuned for application-specific performance. It helps improve ride quality, handling, and comfort while maintaining controlled suspension response across changing road conditions. The B8 5100 series is engineered for drivers seeking dependable performance from a high-quality replacement or upgrade shock absorber.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design to deliver consistent, fade-resistant damping in demanding driving conditions. Its velocity-sensitive, digressive piston responds quickly to road inputs, helping provide controlled wheel movement on smooth pavement, rough terrain, and variable surfaces. The zinc-plated finish supports long-term durability, while the smooth-body construction is designed for reliable operation without a coilover configuration. Damping is non-adjustable, and no reservoir, boot, spring seat, or mounting hardware is included.\u003cbr\u003eThis Bilstein shock absorber features 12mm eye-style upper and lower mounts and is designed for compatible 2009–2013 Ford F-150 applications, including model years 2009, 2010, 2011, 2012, and 2013. Verify vehicle fitment and suspension configuration before ordering, particularly when the truck has been lifted or otherwise modified. The shock has a 20.61-inch collapsed length, a 32.59-inch extended length, and 11.95 inches of available stroke. It is intended for light-truck suspension applications and is not adjustable. This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-255057\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Compatible with 2009–2013 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Type: Suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: 46mm monotube with velocity-sensitive, digressive piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Style: 12mm eye upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 20.61 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 32.59 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 11.95 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 20.61\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nCollapsed Length (Mm): 523.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 32.59\u003cbr\u003e\nStroke\/Travel Length (In): 11.95\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 303.5\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 827.7\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-255057\u003cbr\u003e\nPart Number: 33-255057\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2009\u003cbr\u003e\nFord F-150  2010\u003cbr\u003e\nFord F-150  2011\u003cbr\u003e\nFord F-150  2012\u003cbr\u003e\nFord F-150  2013","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277410413,"sku":"33255057","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-255057_1.jpg?v=1792220275"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-253237-for-2015-2024-ford-f-150","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-253237 for 2015–2024 Ford F-150","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 5100 shock absorber, part number 33-253237. Designed as a direct-fit solution for select 2015–2024 Ford F-150 applications, this light-truck shock absorber is tuned for its specific vehicle platform to help improve ride quality, handling, and overall driving comfort.\u003c\/p\u003e\n\u003cp\u003eThe Bilstein B8 5100 uses a 46mm monotube design and a velocity-sensitive, digressive piston to provide consistent, fade-free damping across changing road conditions. Its non-adjustable damping calibration delivers dependable suspension control, while the smooth-body construction is designed for durability in demanding truck and SUV applications. A black bellows boot helps protect the shaft from road debris, and the zinc-plated finish provides added corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein shock absorber features 12mm eye-style upper and lower mounts, a 14mm shaft, and a 46mm piston. It has a 10.94-inch stroke, a 16.97-inch collapsed length, and a 27.93-inch extended length. The unit is intended for applications without a remote reservoir or included spring seat and is not a coilover shock. Verify vehicle configuration, suspension lift requirements, and mounting specifications before ordering.\u003c\/p\u003e\n\u003cp\u003eFits 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Ford F-150 models where application-specific fitment is confirmed. This product contains a California Proposition 65 warning for cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e46mm monotube design provides consistent, fade-free suspension performance\u003c\/li\u003e\n\u003cli\u003eVelocity-sensitive, digressive piston responds to changing road conditions\u003c\/li\u003e\n\u003cli\u003eApplication-specific tuning helps improve ride quality, handling, and comfort\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for select lifted 2015–2024 Ford F-150 applications\u003c\/li\u003e\n\u003cli\u003eSmooth-body, non-coilover construction with zinc-plated finish\u003c\/li\u003e\n\u003cli\u003eBlack bellows boot helps protect the shock shaft from road debris\u003c\/li\u003e\n\u003cli\u003eNon-adjustable damping with no remote reservoir\u003c\/li\u003e\n\u003cli\u003e12mm eye-style upper and lower mounts\u003c\/li\u003e\n\u003cli\u003e14mm shaft diameter and 46mm piston diameter\u003c\/li\u003e\n\u003cli\u003e10.94-inch stroke with 16.97-inch collapsed and 27.93-inch extended lengths\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 10.94\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 277.9\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 709.5\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 16.97\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nCollapsed Length (Mm): 431.0\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 27.93\u003cbr\u003e\nAaiaid Part Number: BBGL33-253237\u003cbr\u003e\nPart Number: 33-253237\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277508717,"sku":"33253237","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-253237_1.jpg?v=1792220294"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-253190-for-2015-2024-ford-f-150","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-253190 for 2015-2024 Ford F-150","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade your lifted truck’s ride and handling with the Bilstein B8 5100 suspension shock absorber, part number 33-253190. Designed as a direct-fit solution for select 2015–2024 Ford F-150 applications, this light-truck shock absorber is tuned for application-specific performance. It helps provide improved ride quality, enhanced control, and consistent comfort on changing road surfaces.\u003cbr\u003eThe B8 5100 uses a 46mm monotube design with a velocity-sensitive, digressive piston. This internal design responds quickly to changing road conditions while helping maintain fade-free damping performance during demanding driving. The smooth-body, non-coilover construction features a zinc-plated finish, black bellows boot, and non-adjustable damping for dependable operation without additional setup.\u003cbr\u003eBilstein part number 33-253190 features eye-style upper and lower mounts and is designed without a reservoir or spring seat. Its extended and collapsed operating lengths are engineered for the specified application, making proper vehicle fitment verification essential before installation. This shock absorber is compatible with 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Ford F-150 models; confirm suspension configuration and vehicle application before ordering. This product contains a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design delivers consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning improves ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit suspension shock absorber for select lifted Ford F-150 trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction with zinc-plated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included for added shaft protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping requires no additional setup\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper and lower eye mounts use 12mm mounting points\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir or spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2015–2024 Ford F-150 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 11.22\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 285.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 730.0\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 17.52\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nCollapsed Length (Mm): 445.0\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 28.74\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nAaiaid Part Number: BBGL33-253190\u003cbr\u003e\nPart Number: 33-253190\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277607021,"sku":"33253190","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-253190_1.jpg?v=1792220313"},{"product_id":"bilstein-b6-4600-33-253183-monotube-suspension-shock-absorber-for-2015-2024-ford-f-150","title":"Bilstein B6 4600 33-253183 Monotube Suspension Shock Absorber for 2015-2024 Ford F-150","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the ride and handling of your stock-height light truck with the Bilstein B6 4600 Suspension Shock Absorber, part number 33-253183. Designed as a direct-fit replacement for original equipment shock absorbers, this Bilstein shock is engineered specifically for compatible 2015-2024 Ford F-150 applications. It helps provide improved control, ride quality, and comfort without requiring vehicle modifications or a lift kit.\u003cbr\u003eThe B6 4600 uses a 46mm monotube design to deliver consistent, fade-resistant performance under changing driving conditions. Its velocity-sensitive, digressive piston responds quickly to variations in the road, helping maintain tire contact and vehicle stability during everyday driving, towing, hauling, and demanding road surfaces. Bilstein application-specific tuning provides balanced damping performance for the intended vehicle configuration.\u003cbr\u003eThis non-adjustable shock absorber features a smooth-body, non-coilover construction with a durable yellow-painted finish and a blue bellows boot for added protection. The 12mm eye-style upper and lower mounts are designed for secure installation, while the 14mm shaft supports dependable operation. The assembly does not include a reservoir or spring seat. The Bilstein B6 4600 is an effective suspension upgrade for drivers seeking more controlled handling and dependable performance from a stock-height Ford F-150.\u003cbr\u003eCompatible applications include the 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Ford F-150. Verify vehicle configuration and mounting requirements before installation. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning supports improved ride quality and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eYellow-painted finish with blue bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e12mm eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir or spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits compatible 2015-2024 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 17.52\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nBoot Included: Blue Bellows\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 730.0\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 445.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 28.74\u003cbr\u003e\nAaiaid Part Number: BBGL33-253183\u003cbr\u003e\nPart Number: 33-253183\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277705325,"sku":"33253183","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-253183_1.jpg?v=1792220331"},{"product_id":"bilstein-b6-4600-33-248097-monotube-suspension-shock-absorber","title":"Bilstein B6 4600 33-248097 Monotube Suspension Shock Absorber","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck or SUV with the Bilstein B6 4600 suspension shock absorber, part number 33-248097. Designed as a direct-fit replacement for original equipment shocks, this application-specific absorber helps improve ride quality, handling, and comfort without requiring vehicle modifications. It is engineered for select Dodge W100, W200, W300, W100 Pickup, and Ramcharger applications from the 1972–1985 model years; verify vehicle fitment before ordering.\u003cbr\u003eThe Bilstein B6 4600 uses a 46mm monotube design to deliver consistent, fade-resistant performance under changing driving conditions. Its velocity-sensitive, digressive piston responds quickly to road inputs, helping maintain controlled wheel movement on rough surfaces while providing stable handling during everyday driving. Bilstein tunes each shock for its specific application to support balanced performance and dependable operation.\u003cbr\u003eThis smooth-body shock absorber features non-adjustable damping, a yellow-painted finish, and a blue bellows boot for added shaft protection. The upper and lower mounts use eye-style configurations, and the unit is supplied without a spring seat or reservoir. The shock has a 14mm shaft and is designed for light-truck suspension applications. Bilstein part number 33-248097 is part of the B6 4600 series and is built for drivers seeking a meaningful performance upgrade over conventional OE-style replacements. This product may expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning supports improved ride quality and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B6 4600 series with non-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body construction with yellow-painted finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlue bellows boot helps protect the shock shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft with eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo spring seat or external reservoir included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for select 1972–1985 Dodge W100, W200, W300, W100 Pickup, and Ramcharger applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length (In): 13.78\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 350.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nLower Mount Type: Eye 17.5mm\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nUpper Mount Type: Eye 17.5mm\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nBoot Included: Blue Bellows\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 544.2\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (In): 21.43\u003cbr\u003e\nAaiaid Part Number: BBGL33-248097\u003cbr\u003e\nPart Number: 33-248097\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nDodge Ramcharger  1974\u003cbr\u003e\nDodge Ramcharger  1975\u003cbr\u003e\nDodge Ramcharger  1976\u003cbr\u003e\nDodge Ramcharger  1977\u003cbr\u003e\nDodge Ramcharger  1978\u003cbr\u003e\nDodge Ramcharger  1979\u003cbr\u003e\nDodge Ramcharger  1980\u003cbr\u003e\nDodge Ramcharger  1981\u003cbr\u003e\nDodge Ramcharger  1982\u003cbr\u003e\nDodge Ramcharger  1983\u003cbr\u003e\nDodge Ramcharger  1984\u003cbr\u003e\nDodge Ramcharger  1985\u003cbr\u003e\nDodge Ramcharger  1986\u003cbr\u003e\nDodge Ramcharger  1987\u003cbr\u003e\nDodge Ramcharger  1988\u003cbr\u003e\nDodge Ramcharger  1989\u003cbr\u003e\nDodge Ramcharger  1990\u003cbr\u003e\nDodge Ramcharger  1991\u003cbr\u003e\nDodge Ramcharger  1992\u003cbr\u003e\nDodge Ramcharger  1993\u003cbr\u003e\nDodge W100  1975\u003cbr\u003e\nDodge W100  1976\u003cbr\u003e\nDodge W100  1977\u003cbr\u003e\nDodge W100  1984\u003cbr\u003e\nDodge W100  1985\u003cbr\u003e\nDodge W100  1986\u003cbr\u003e\nDodge W100  1987\u003cbr\u003e\nDodge W100  1988\u003cbr\u003e\nDodge W100  1989\u003cbr\u003e\nDodge W100 Pickup  1972\u003cbr\u003e\nDodge W100 Pickup  1973\u003cbr\u003e\nDodge W100 Pickup  1974\u003cbr\u003e\nDodge W150  1977\u003cbr\u003e\nDodge W150  1978\u003cbr\u003e\nDodge W150  1979\u003cbr\u003e\nDodge W150  1980\u003cbr\u003e\nDodge W150  1981\u003cbr\u003e\nDodge W150  1982\u003cbr\u003e\nDodge W150  1983\u003cbr\u003e\nDodge W150  1984\u003cbr\u003e\nDodge W150  1985\u003cbr\u003e\nDodge W150  1986\u003cbr\u003e\nDodge W150  1987\u003cbr\u003e\nDodge W150  1988\u003cbr\u003e\nDodge W150  1989\u003cbr\u003e\nDodge W150  1990\u003cbr\u003e\nDodge W150  1991\u003cbr\u003e\nDodge W150  1992\u003cbr\u003e\nDodge W150  1993\u003cbr\u003e\nDodge W200  1975\u003cbr\u003e\nDodge W200  1976\u003cbr\u003e\nDodge W200  1977\u003cbr\u003e\nDodge W200  1978\u003cbr\u003e\nDodge W200  1979\u003cbr\u003e\nDodge W200  1980\u003cbr\u003e\nDodge W200 Pickup  1972\u003cbr\u003e\nDodge W200 Pickup  1973\u003cbr\u003e\nDodge W200 Pickup  1974\u003cbr\u003e\nDodge W250  1981\u003cbr\u003e\nDodge W250  1982\u003cbr\u003e\nDodge W250  1983\u003cbr\u003e\nDodge W250  1984\u003cbr\u003e\nDodge W250  1985\u003cbr\u003e\nDodge W250  1986\u003cbr\u003e\nDodge W250  1987\u003cbr\u003e\nDodge W250  1988\u003cbr\u003e\nDodge W250  1989\u003cbr\u003e\nDodge W250  1990\u003cbr\u003e\nDodge W250  1991\u003cbr\u003e\nDodge W250  1992\u003cbr\u003e\nDodge W250  1993\u003cbr\u003e\nDodge W300  1975\u003cbr\u003e\nDodge W300  1976\u003cbr\u003e\nDodge W300  1977\u003cbr\u003e\nDodge W300  1978\u003cbr\u003e\nDodge W300  1979\u003cbr\u003e\nDodge W300  1980\u003cbr\u003e\nDodge W300 Pickup  1972\u003cbr\u003e\nDodge W300 Pickup  1973\u003cbr\u003e\nDodge W300 Pickup  1974\u003cbr\u003e\nDodge W350  1981\u003cbr\u003e\nDodge W350  1982\u003cbr\u003e\nDodge W350  1983\u003cbr\u003e\nDodge W350  1984\u003cbr\u003e\nDodge W350  1985\u003cbr\u003e\nDodge W350  1986\u003cbr\u003e\nDodge W350  1987\u003cbr\u003e\nDodge W350  1988\u003cbr\u003e\nDodge W350  1989\u003cbr\u003e\nDodge W350  1990\u003cbr\u003e\nDodge W350  1991\u003cbr\u003e\nDodge W350  1992\u003cbr\u003e\nDodge W350  1993\u003cbr\u003e\nPlymouth Trailduster  1974\u003cbr\u003e\nPlymouth Trailduster  1975\u003cbr\u003e\nPlymouth Trailduster  1976\u003cbr\u003e\nPlymouth Trailduster  1977\u003cbr\u003e\nPlymouth Trailduster  1978\u003cbr\u003e\nPlymouth Trailduster  1979\u003cbr\u003e\nPlymouth Trailduster  1980\u003cbr\u003e\nPlymouth Trailduster  1981","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277803629,"sku":"33248097","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-248097_1.jpg?v=1792220349"},{"product_id":"bilstein-b8-5100-front-shock-absorber-33-247724-for-1996-2004-toyota-tacoma","title":"Bilstein B8 5100 Front Shock Absorber 33-247724 for 1996-2004 Toyota Tacoma","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your Toyota Tacoma with the Bilstein B8 5100 shock absorber, part number 33-247724. Designed as a direct-fit replacement for lifted trucks and SUVs, this light-truck shock absorber is application-tuned to deliver improved ride quality, handling, and comfort. It fits Toyota Tacoma models from 1996 through 2004 and provides dependable performance for daily driving, hauling, and off-road use.\u003cbr\u003eThe B8 5100 uses a 46mm monotube design to maintain consistent, fade-resistant damping in demanding conditions. Its velocity-sensitive, digressive piston responds quickly to changing road surfaces, helping the suspension remain controlled over bumps, rough terrain, and varying loads. The non-adjustable damping calibration is specifically matched to the application for balanced control without requiring manual setup.\u003cbr\u003eThis Bilstein shock absorber features a smooth-body, non-coilover construction with a zinc-plated finish for added durability. It includes a black bellows boot to help protect the 14mm shaft from road debris. The upper and lower mounts use 19mm eye-style mounting points, while the design includes no external reservoir or spring seat. With a 7.64-inch stroke and 13.62-inch collapsed length, this shock is engineered for compatible lifted Tacoma suspension applications. Verify vehicle configuration and suspension lift before installation. This product carries a California Proposition 65 warning regarding cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit Bilstein B8 5100 shock absorber for compatible 1996-2004 Toyota Tacoma applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning improves ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish helps provide durable corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper and lower 19mm eye-style mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft with included black bellows protective boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e7.64-inch stroke and 13.62-inch collapsed length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-247724\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 194.1\u003cbr\u003e\nCollapsed Length (Mm): 346.0\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (Mm): 537.0\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (In): 21.14\u003cbr\u003e\nCollapsed Length (In): 13.62\u003cbr\u003e\nStroke\/Travel Length (In): 7.64\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nUpper Mount Type: Eye 19mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-247724\u003cbr\u003e\nPart Number: 33-247724\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  1996\u003cbr\u003e\nToyota Tacoma  1997\u003cbr\u003e\nToyota Tacoma  1998\u003cbr\u003e\nToyota Tacoma  1999\u003cbr\u003e\nToyota Tacoma  2000\u003cbr\u003e\nToyota Tacoma  2001\u003cbr\u003e\nToyota Tacoma  2002\u003cbr\u003e\nToyota Tacoma  2003\u003cbr\u003e\nToyota Tacoma  2004","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277901933,"sku":"33247724","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-247724_1.jpg?v=1792220368"},{"product_id":"bilstein-b8-5100-front-shock-absorber-33-247717-for-toyota-tacoma","title":"Bilstein B8 5100 Front Shock Absorber 33-247717 for Toyota Tacoma","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your Toyota Tacoma with the Bilstein B8 5100 shock absorber, part number 33-247717. Engineered as a direct-fit solution for lifted trucks and SUVs, this Bilstein shock absorber is tuned for the specific application to provide improved ride quality, handling, and comfort. It is designed to help maintain control over changing road surfaces while delivering dependable performance for light-truck use.\u003cbr\u003eThe B8 5100 uses a 46mm monotube design with a velocity-sensitive, digressive piston. This internal design responds quickly to changing suspension movement and helps provide consistent, fade-free damping in demanding driving conditions. The smooth-body, non-coilover construction has non-adjustable damping, no external reservoir, and a zinc-plated finish for durable service. A black bellows boot is included to help protect the shock shaft from road debris.\u003cbr\u003eThis Bilstein shock absorber features 19mm eye-style upper and lower mounts and is designed for applications that do not require a spring seat. It provides 8.02 inches of suspension travel, with a 14.07-inch collapsed length and a 22.09-inch extended length. The 14mm shaft and 46mm piston support controlled suspension movement while maintaining a direct-fit installation approach. This shock absorber is compatible with 1996 through 2004 Toyota Tacoma models, including model years 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, and 2004. A California Proposition 65 warning applies.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-247717\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Toyota Tacoma, model years 1996–2004\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: 46mm monotube shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: Velocity-sensitive, digressive piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: 19mm eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Travel: 8.02 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 14.07 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.09 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSegment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 203.7\u003cbr\u003e\nCollapsed Length (Mm): 357.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (Mm): 561.0\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (In): 22.09\u003cbr\u003e\nCollapsed Length (In): 14.07\u003cbr\u003e\nStroke\/Travel Length (In): 8.02\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nUpper Mount Type: Eye 19mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-247717\u003cbr\u003e\nPart Number: 33-247717\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  1996\u003cbr\u003e\nToyota Tacoma  1997\u003cbr\u003e\nToyota Tacoma  1998\u003cbr\u003e\nToyota Tacoma  1999\u003cbr\u003e\nToyota Tacoma  2000\u003cbr\u003e\nToyota Tacoma  2001\u003cbr\u003e\nToyota Tacoma  2002\u003cbr\u003e\nToyota Tacoma  2003\u003cbr\u003e\nToyota Tacoma  2004","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771278098541,"sku":"33247717","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-247717_1.jpg?v=1792220385"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-245492-for-toyota-hilux","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-245492 for Toyota Hilux","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted light truck or SUV with the Bilstein B8 5100 suspension shock absorber, Part Number 33-245492. Designed as a direct-fit solution for select 2009–2018 Toyota Hilux models, this shock absorber is engineered to improve ride quality, handling, stability, and overall driving comfort. Application-specific tuning helps provide balanced performance across changing road and load conditions.\u003cbr\u003eThe B8 5100 features a 46mm monotube design that promotes consistent, fade-resistant damping performance in demanding conditions. Its velocity-sensitive, digressive piston responds to road inputs quickly, helping maintain improved tire contact and vehicle control over uneven surfaces. The smooth-body, non-coilover construction is suitable for applications that do not require an integrated spring seat or external reservoir.\u003cbr\u003eThis Bilstein shock absorber uses a zinc-plated finish for added durability and includes a black bellows boot to help protect the shaft from debris. Both the upper and lower mounting points use 19mm eye-style mounts, while the 14mm shaft supports dependable operation under regular light-truck use. The unit is non-adjustable and does not include a spring seat or reservoir. It has a 22.49-inch extended length, a 14.25-inch collapsed length, and 8.20 inches of travel. Please verify vehicle application and suspension configuration before ordering.\u003cbr\u003eCompatible applications include the 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, and 2018 Toyota Hilux. This product is sold as a Bilstein B8 5100 shock absorber and carries the manufacturer’s California Proposition 65 warning regarding cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning supports improved ride quality and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit suspension shock absorber for select 2009–2018 Toyota Hilux models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper and lower 19mm eye-style mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e22.49-inch extended length and 14.25-inch collapsed length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.20 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish with black bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo spring seat or external reservoir included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 208.3\u003cbr\u003e\nCollapsed Length (Mm): 362.0\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (Mm): 571.2\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (In): 22.49\u003cbr\u003e\nCollapsed Length (In): 14.25\u003cbr\u003e\nStroke\/Travel Length (In): 8.20\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nUpper Mount Type: Eye 19mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-245492\u003cbr\u003e\nPart Number: 33-245492\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Hilux  2005\u003cbr\u003e\nToyota Hilux  2006\u003cbr\u003e\nToyota Hilux  2007\u003cbr\u003e\nToyota Hilux  2008\u003cbr\u003e\nToyota Hilux  2009\u003cbr\u003e\nToyota Hilux  2010\u003cbr\u003e\nToyota Hilux  2011\u003cbr\u003e\nToyota Hilux  2012\u003cbr\u003e\nToyota Hilux  2013\u003cbr\u003e\nToyota Hilux  2014\u003cbr\u003e\nToyota Hilux  2015\u003cbr\u003e\nToyota Hilux  2016\u003cbr\u003e\nToyota Hilux  2017\u003cbr\u003e\nToyota Hilux  2018\u003cbr\u003e\nToyota Hilux  2019\u003cbr\u003e\nToyota Hilux  2020\u003cbr\u003e\nToyota Hilux  2021\u003cbr\u003e\nToyota Hilux  2022\u003cbr\u003e\nToyota Hilux  2023\u003cbr\u003e\nToyota Hilux  2024\u003cbr\u003e\nToyota Hilux  2025","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771278262381,"sku":"33245492","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-245492_1.jpg?v=1792220404"},{"product_id":"bilstein-b8-5100-shock-absorber-33-238319-for-2014-2018-chevrolet-silverado-1500-and-gmc-sierra-1500","title":"Bilstein B8 5100 Shock Absorber 33-238319 for 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein B8 5100 suspension shock absorber, part number 33-238319, is engineered as a direct-fit replacement for lifted light trucks and SUVs. Designed for select 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 applications, this shock absorber helps improve ride quality, handling, and driving comfort while maintaining dependable performance on changing road surfaces. Application-specific tuning helps provide balanced control for the vehicle and suspension setup.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design with a velocity-sensitive, digressive piston. This internal construction responds quickly to changing terrain and helps deliver consistent, fade-resistant damping in demanding conditions. The smooth-body, non-coilover design is non-adjustable and does not include a spring seat, making it a practical suspension upgrade for compatible lifted truck applications. Zinc-plated finishing adds protection against corrosion, while the included black bellows boot helps protect the shock shaft from road debris.\u003cbr\u003eInstallation uses eye-style upper and lower mounts, with a 14mm shaft diameter and no external reservoir. The shock absorber provides 9.61 inches of suspension travel and is designed for a collapsed length of 16.18 inches and an extended length of 25.79 inches. Verify vehicle year, model, suspension configuration, lift height, and mounting requirements before ordering to ensure proper fitment. This product is intended for the listed Chevrolet Silverado 1500 and GMC Sierra 1500 applications from 2014 through 2018. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit suspension shock absorber for select lifted light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series delivers application-specific damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design supports consistent, fade-resistant operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction with non-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish helps resist corrosion\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot helps protect the shock shaft from debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter and 9.61 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length (In): 16.18\u003cbr\u003e\nStroke\/Travel Length (In): 9.61\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (Mm): 655.0\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (In): 25.79\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 244.1\u003cbr\u003e\nCollapsed Length (Mm): 411.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-238319\u003cbr\u003e\nPart Number: 33-238319\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Silverado 1500  2014\u003cbr\u003e\nChevrolet Silverado 1500  2015\u003cbr\u003e\nChevrolet Silverado 1500  2016\u003cbr\u003e\nChevrolet Silverado 1500  2017\u003cbr\u003e\nChevrolet Silverado 1500  2018\u003cbr\u003e\nChevrolet Silverado 1500 LD  2019\u003cbr\u003e\nGMC Sierra 1500  2014\u003cbr\u003e\nGMC Sierra 1500  2015\u003cbr\u003e\nGMC Sierra 1500  2016\u003cbr\u003e\nGMC Sierra 1500  2017\u003cbr\u003e\nGMC Sierra 1500  2018\u003cbr\u003e\nGMC Sierra 1500 Limited  2019","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771278393453,"sku":"33238319","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-238319_3.jpg?v=1792220423"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-236964-for-ford-excursion","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-236964 for Ford Excursion","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck or SUV with the Bilstein B8 5100 suspension shock absorber, part number 33-236964. Designed as a direct-fit replacement for select Ford Excursion applications from 2000 through 2005, this shock absorber is specifically tuned to deliver improved ride quality, handling, and comfort. Its 46mm monotube construction provides consistent, fade-resistant performance under changing driving conditions, making it a dependable choice for light-truck suspension systems.\u003cbr\u003eThe Bilstein B8 5100 uses a velocity-sensitive, digressive piston that responds quickly to changing road surfaces while helping maintain controlled wheel movement. The smooth-body, non-coilover design includes a zinc-plated finish for added durability, a black bellows boot for shaft protection, and non-adjustable damping calibrated for the intended vehicle application. A bar-pin upper mount and 12mm eye lower mount support straightforward installation when replacing a compatible factory shock absorber.\u003cbr\u003eThis Bilstein shock absorber has a collapsed length of 20.28 inches, an extended length of 32.01 inches, and 11.73 inches of suspension travel. It features a 14mm shaft, no external reservoir, and no spring seat. The B8 5100 series is engineered for trucks and SUVs with lifted suspensions, helping provide stable, controlled performance both on the street and over uneven terrain. Verify vehicle fitment and mounting configuration before installation. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 suspension shock absorber for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for select 2000–2005 Ford Excursion applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-236964\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube construction for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Design: Velocity-sensitive, digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth-body, non-coilover configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Bar-pin upper mount and 12mm eye lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Durable zinc-plated exterior\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable damping tuned for the specific application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Travel: 11.73 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 20.28 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 32.01 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: No external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length (In): 20.28\u003cbr\u003e\nStroke\/Travel Length (In): 11.73\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nUpper Mount Type: Bar Pin\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (Mm): 813.0\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (In): 32.01\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 297.9\u003cbr\u003e\nCollapsed Length (Mm): 515.0\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-236964\u003cbr\u003e\nPart Number: 33-236964\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Excursion  2000\u003cbr\u003e\nFord Excursion  2001\u003cbr\u003e\nFord Excursion  2002\u003cbr\u003e\nFord Excursion  2003\u003cbr\u003e\nFord Excursion  2004\u003cbr\u003e\nFord Excursion  2005","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771281473645,"sku":"33236964","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-236964_1.jpg?v=1792220450"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-236957","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-236957","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted light truck or SUV with the Bilstein B8 5100 suspension shock absorber, part number 33-236957. Designed as a direct-fit replacement for select Jeep Grand Cherokee applications, this shock is specifically tuned to deliver improved ride quality, handling, and comfort without requiring adjustable damping or a separate reservoir. It fits 1999–2004 Jeep Grand Cherokee models, including model years 1999, 2000, 2001, 2002, 2003, and 2004.\u003cbr\u003eThe B8 5100 uses a 46mm monotube design with a velocity-sensitive, digressive piston that responds quickly to changing road and driving conditions. This design helps maintain consistent, fade-free performance during extended use, while application-specific tuning supports confident control on the street and over uneven terrain. The smooth-body construction is intended for light-truck applications and provides a durable, dependable suspension solution for vehicles with increased ride height.\u003cbr\u003eThis Bilstein shock absorber features a zinc-plated finish, black bellows boot, and eye-style upper and lower mounts. It has a 14mm shaft, 15.12-inch collapsed length, 24.46-inch extended length, and 9.23 inches of stroke. The spring seat is not included, and the unit is non-coilover with non-adjustable damping. Professional installation is recommended, and vehicle fitment should be verified before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension shock absorber for select 1999–2004 Jeep Grand Cherokee models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: 46mm monotube construction for consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: Velocity-sensitive, digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover construction for light-truck applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounts: Eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: No external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-236957\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length (In): 15.12\u003cbr\u003e\nStroke\/Travel Length (In): 9.23\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nUpper Mount Type: Eye 12.1mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (Mm): 621.2\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (In): 24.46\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nLower Mount Type: Eye 12.2mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 234.4\u003cbr\u003e\nCollapsed Length (Mm): 384.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-236957\u003cbr\u003e\nPart Number: 33-236957\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Grand Cherokee  1999\u003cbr\u003e\nJeep Grand Cherokee  2000\u003cbr\u003e\nJeep Grand Cherokee  2001\u003cbr\u003e\nJeep Grand Cherokee  2002\u003cbr\u003e\nJeep Grand Cherokee  2003\u003cbr\u003e\nJeep Grand Cherokee  2004","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771284750445,"sku":"33236957","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-236957_1.jpg?v=1792220462"},{"product_id":"bilstein-b8-5125-monotube-eye-to-eye-shock-absorber-33-233970","title":"Bilstein B8 5125 Monotube Eye-to-Eye Shock Absorber 33-233970","description":"B8 5125 - Suspension Shock Absorber\n\u003cp\u003eBilstein B8 5125 shock absorber part number 33-233970 is designed for custom suspension applications where a direct-fit shock is not available. Its high-pressure monotube construction helps provide consistent, fade-resistant performance during demanding street, off-road, and light-truck use. The smooth-body, non-coilover design is paired with self-adjusting deflective disc valving for dependable control across changing road and suspension conditions.\u003cbr\u003eThis eye-to-eye shock absorber uses industry-standard 5\/8-inch eye bushings at the upper and lower mounts and includes a black bellows boot for added shaft protection. The 46mm piston and 14mm shaft support responsive damping, while the zinc-plated finish helps provide lasting protection against corrosion. The shock uses fixed, non-adjustable damping and does not include a remote reservoir or spring seat.\u003cbr\u003eWith a 20.41-inch extended length, 13.04-inch collapsed length, and 7.37-inch travel range, this Bilstein B8 5125 unit is suited to custom builders who need a specific shock length and valve rate. The listed damping force is 2,495 at rebound and 620 at compression at 0.52 meters per second. It is compatible with select Jeep CJ5 and CJ7 applications, including model years from 1976 through 1983, subject to vehicle configuration and suspension setup. Professional installation and verification of mounting position, travel, and fitment are recommended before purchase. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5125\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: High-pressure monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMount Type: Eye-to-eye with 5\/8-inch eye bushings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 20.41 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 13.04 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel Length: 7.37 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication Segment: Light truck and custom suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRebound Damping: 2,495 at 0.52 meters per second\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompression Damping: 620 at 0.52 meters per second\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nLower Mount Type: Eye 5\/8in\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 187.2\u003cbr\u003e\nCollapsed Length (Mm): 331.3\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nMount Type: Eye-to-Eye\u003cbr\u003e\nRebound @0.52m\/S: 2495\u003cbr\u003e\nExtended Length (Mm): 518.4\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (In): 20.41\u003cbr\u003e\nCollapsed Length (In): 13.04\u003cbr\u003e\nStroke\/Travel Length (In): 7.37\u003cbr\u003e\nSeries: B8 5125\u003cbr\u003e\nUpper Mount Type: Eye 5\/8in\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nCompression @0.52m\/S: 620\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-233970\u003cbr\u003e\nPart Number: 33-233970\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep CJ5  1976\u003cbr\u003e\nJeep CJ5  1977\u003cbr\u003e\nJeep CJ5  1978\u003cbr\u003e\nJeep CJ5  1979\u003cbr\u003e\nJeep CJ5  1980\u003cbr\u003e\nJeep CJ5  1981\u003cbr\u003e\nJeep CJ5  1982\u003cbr\u003e\nJeep CJ5  1983\u003cbr\u003e\nJeep CJ7  1976\u003cbr\u003e\nJeep CJ7  1977\u003cbr\u003e\nJeep CJ7  1978\u003cbr\u003e\nJeep CJ7  1979\u003cbr\u003e\nJeep CJ7  1980\u003cbr\u003e\nJeep CJ7  1981\u003cbr\u003e\nJeep CJ7  1982\u003cbr\u003e\nJeep CJ7  1983\u003cbr\u003e\nJeep CJ7  1984\u003cbr\u003e\nJeep CJ7  1985\u003cbr\u003e\nJeep CJ7  1986","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771295367277,"sku":"33233970","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-233970_1.jpg?v=1792220482"},{"product_id":"bilstein-b8-5125-33-230450-monotube-suspension-shock-absorber","title":"Bilstein B8 5125 33-230450 Monotube Suspension Shock Absorber","description":"B8 5125 - Suspension Shock Absorber\n\u003cp\u003eBilstein B8 5125 33-230450 suspension shock absorbers are engineered for custom light truck applications where a direct-fit Bilstein solution may not be available. This high-pressure monotube shock uses a 46 mm piston and self-adjusting deflective disc valving to deliver consistent damping performance, improved control, and fade-resistant operation across demanding driving conditions. The smooth-body design is intended for custom suspension builds and is not configured as a coilover.\u003cbr\u003eThis Bilstein B8 5125 shock absorber features a stem-to-eye mounting configuration with a stem upper mount and a 5\/8-inch eye lower mount. It includes a black bellows boot to help protect the shaft from road debris, while the zinc-plated finish provides additional durability in exposed underbody environments. The non-adjustable damping configuration offers a carefully engineered balance for applications requiring dependable performance without manual tuning.\u003cbr\u003eWith an extended length of 22.91 inches, a collapsed length of 14.32 inches, and 8.59 inches of available stroke, the Bilstein 33-230450 is suited to a wide range of custom fitments when its mounting style, travel, and valving specifications match the vehicle and suspension design. It does not include a reservoir or spring seat. Verify application clearance, mounting orientation, and required shock travel before installation. This product is identified by Bilstein part number 33-230450 and belongs to the B8 5125 series. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46 mm monotube piston design for consistent, fade-resistant damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStem-to-eye mounting configuration with a stem upper mount and 5\/8-inch eye lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSelf-adjusting deflective disc valving with non-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length of 22.91 inches and collapsed length of 14.32 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.59 inches of shock stroke for custom suspension applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover design for light truck and custom fitments\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included for added shaft protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish for enhanced durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir or spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nMount Type: Stem-to-Eye\u003cbr\u003e\nRebound @0.52m\/S: 3775\u003cbr\u003e\nExtended Length (Mm): 581.9\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (In): 22.91\u003cbr\u003e\nCollapsed Length (In): 14.32\u003cbr\u003e\nStroke\/Travel Length (In): 8.59\u003cbr\u003e\nSeries: B8 5125\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 218.2\u003cbr\u003e\nCollapsed Length (Mm): 363.7\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nCompression @0.52m\/S: 755\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nLower Mount Type: Eye 5\/8in\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL33-230450\u003cbr\u003e\nPart Number: 33-230450\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771302215789,"sku":"33230450","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-230450_1.jpg?v=1792220505"}],"url":"https:\/\/truckarmy.com\/collections\/shocks-struts.oembed?page=2","provider":"Truck Army","version":"1.0","type":"link"}