{"title":"Suspension for 2024 Ford F-150","description":null,"products":[{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-318950-for-ford-f-150","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-318950 for Ford F-150","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 5100 suspension shock absorber, part number 33-318950. Designed as a direct-fit solution for select 2015–2024 Ford F-150 applications, this shock absorber is engineered to improve ride quality, handling, and comfort while maintaining dependable performance on changing road surfaces. Its application-specific tuning helps provide balanced control for light-truck use.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design with a velocity-sensitive, digressive piston. This configuration responds quickly to varying road conditions and helps deliver consistent, fade-free damping in demanding driving environments. The smooth-body construction, zinc-plated finish, and non-adjustable damping make this shock absorber a durable replacement or suspension upgrade for trucks requiring reliable control without external adjustment.\u003cbr\u003eThis Bilstein shock absorber features a 14mm shaft, 12mm eye mounts at the upper and lower attachment points, and a black bellows boot for added shaft protection. It has a travel length of 11.25 inches, a collapsed length of 18.22 inches, and an extended length of 29.47 inches. The shock is designed without a reservoir or spring seat and is intended for lifted truck applications. Verify vehicle configuration and suspension requirements before installation. Fits 2015–2024 Ford F-150 models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-318950\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension shock absorber for select lifted Ford F-150 trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: 12mm eye mount on upper and lower ends\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel Length: 11.25 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 18.22 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 29.47 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: 2015–2024 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 11.25\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 285.8\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 29.47\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 18.22\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nCollapsed Length (Mm): 462.8\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nExtended Length (Mm): 748.5\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nAaiaid Part Number: BBGL33-318950\u003cbr\u003e\nPart Number: 33-318950\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771272036461,"sku":"33318950","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-318950_2.jpg?v=1792220062"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-253237-for-2015-2024-ford-f-150","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-253237 for 2015-2026 Ford F-150","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 5100 shock absorber, part number 33-253237. Designed as a direct-fit solution for select 2015–2024 Ford F-150 applications, this light-truck shock absorber is tuned for its specific vehicle platform to help improve ride quality, handling, and overall driving comfort.\u003c\/p\u003e\n\u003cp\u003eThe Bilstein B8 5100 uses a 46mm monotube design and a velocity-sensitive, digressive piston to provide consistent, fade-free damping across changing road conditions. Its non-adjustable damping calibration delivers dependable suspension control, while the smooth-body construction is designed for durability in demanding truck and SUV applications. A black bellows boot helps protect the shaft from road debris, and the zinc-plated finish provides added corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein shock absorber features 12mm eye-style upper and lower mounts, a 14mm shaft, and a 46mm piston. It has a 10.94-inch stroke, a 16.97-inch collapsed length, and a 27.93-inch extended length. The unit is intended for applications without a remote reservoir or included spring seat and is not a coilover shock. Verify vehicle configuration, suspension lift requirements, and mounting specifications before ordering.\u003c\/p\u003e\n\u003cp\u003eFits 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Ford F-150 models where application-specific fitment is confirmed. This product contains a California Proposition 65 warning for cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e46mm monotube design provides consistent, fade-free suspension performance\u003c\/li\u003e\n\u003cli\u003eVelocity-sensitive, digressive piston responds to changing road conditions\u003c\/li\u003e\n\u003cli\u003eApplication-specific tuning helps improve ride quality, handling, and comfort\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for select lifted 2015–2024 Ford F-150 applications\u003c\/li\u003e\n\u003cli\u003eSmooth-body, non-coilover construction with zinc-plated finish\u003c\/li\u003e\n\u003cli\u003eBlack bellows boot helps protect the shock shaft from road debris\u003c\/li\u003e\n\u003cli\u003eNon-adjustable damping with no remote reservoir\u003c\/li\u003e\n\u003cli\u003e12mm eye-style upper and lower mounts\u003c\/li\u003e\n\u003cli\u003e14mm shaft diameter and 46mm piston diameter\u003c\/li\u003e\n\u003cli\u003e10.94-inch stroke with 16.97-inch collapsed and 27.93-inch extended lengths\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 10.94\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 277.9\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 709.5\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 16.97\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nCollapsed Length (Mm): 431.0\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 27.93\u003cbr\u003e\nAaiaid Part Number: BBGL33-253237\u003cbr\u003e\nPart Number: 33-253237\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277508717,"sku":"33253237","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-253237_1.jpg?v=1792220294"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-253190-for-2015-2024-ford-f-150","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-253190 for 2015-2026 Ford F-150","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade your lifted truck’s ride and handling with the Bilstein B8 5100 suspension shock absorber, part number 33-253190. Designed as a direct-fit solution for select 2015–2024 Ford F-150 applications, this light-truck shock absorber is tuned for application-specific performance. It helps provide improved ride quality, enhanced control, and consistent comfort on changing road surfaces.\u003cbr\u003eThe B8 5100 uses a 46mm monotube design with a velocity-sensitive, digressive piston. This internal design responds quickly to changing road conditions while helping maintain fade-free damping performance during demanding driving. The smooth-body, non-coilover construction features a zinc-plated finish, black bellows boot, and non-adjustable damping for dependable operation without additional setup.\u003cbr\u003eBilstein part number 33-253190 features eye-style upper and lower mounts and is designed without a reservoir or spring seat. Its extended and collapsed operating lengths are engineered for the specified application, making proper vehicle fitment verification essential before installation. This shock absorber is compatible with 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Ford F-150 models; confirm suspension configuration and vehicle application before ordering. This product contains a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design delivers consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning improves ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit suspension shock absorber for select lifted Ford F-150 trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction with zinc-plated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included for added shaft protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping requires no additional setup\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper and lower eye mounts use 12mm mounting points\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir or spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2015–2024 Ford F-150 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 11.22\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 285.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 730.0\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 17.52\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nCollapsed Length (Mm): 445.0\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 28.74\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nAaiaid Part Number: BBGL33-253190\u003cbr\u003e\nPart Number: 33-253190\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277607021,"sku":"33253190","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-253190_1.jpg?v=1792220313"},{"product_id":"bilstein-b6-4600-33-253183-monotube-suspension-shock-absorber-for-2015-2024-ford-f-150","title":"Bilstein B6 4600 33-253183 Monotube Suspension Shock Absorber for 2015-2026 Ford F-150","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the ride and handling of your stock-height light truck with the Bilstein B6 4600 Suspension Shock Absorber, part number 33-253183. Designed as a direct-fit replacement for original equipment shock absorbers, this Bilstein shock is engineered specifically for compatible 2015-2024 Ford F-150 applications. It helps provide improved control, ride quality, and comfort without requiring vehicle modifications or a lift kit.\u003cbr\u003eThe B6 4600 uses a 46mm monotube design to deliver consistent, fade-resistant performance under changing driving conditions. Its velocity-sensitive, digressive piston responds quickly to variations in the road, helping maintain tire contact and vehicle stability during everyday driving, towing, hauling, and demanding road surfaces. Bilstein application-specific tuning provides balanced damping performance for the intended vehicle configuration.\u003cbr\u003eThis non-adjustable shock absorber features a smooth-body, non-coilover construction with a durable yellow-painted finish and a blue bellows boot for added protection. The 12mm eye-style upper and lower mounts are designed for secure installation, while the 14mm shaft supports dependable operation. The assembly does not include a reservoir or spring seat. The Bilstein B6 4600 is an effective suspension upgrade for drivers seeking more controlled handling and dependable performance from a stock-height Ford F-150.\u003cbr\u003eCompatible applications include the 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Ford F-150. Verify vehicle configuration and mounting requirements before installation. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning supports improved ride quality and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eYellow-painted finish with blue bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e12mm eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir or spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits compatible 2015-2024 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 17.52\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nBoot Included: Blue Bellows\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 730.0\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 445.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 28.74\u003cbr\u003e\nAaiaid Part Number: BBGL33-253183\u003cbr\u003e\nPart Number: 33-253183\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771277705325,"sku":"33253183","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-253183_1.jpg?v=1792220331"},{"product_id":"bilstein-b8-8100-reservoir-suspension-shock-absorber-25-316773-for-ford-f-150","title":"Bilstein B8 8100 Reservoir Suspension Shock Absorber 25-316773 for Ford F-150","description":"B8 8100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade your lifted truck or SUV with the Bilstein B8 8100 reservoir suspension shock absorber, part number 25-316773. Designed for select 2015–2024 Ford F-150 applications, this direct-fit shock delivers dependable control and ride comfort over rough roads, demanding trails, and extended driving conditions. Its large-bore 2.65-inch shock body increases oil capacity to help manage heat, while aerospace-quality billet components provide durable performance.\u003cbr\u003eThe Bilstein B8 8100 uses a monotube internal design with a remote or piggyback reservoir configuration for consistent damping and improved heat dissipation. A velocity-sensitive digressive valve system is specifically tuned for the application, allowing the shock to respond quickly to changing terrain without sacrificing comfort. The large 60mm piston provides a broad range of tuning capability and helps maintain stable, controlled handling in varied driving conditions.\u003cbr\u003eThis smooth-body, non-coilover shock features an EVO Grey finish, non-adjustable damping, and eye-style upper and lower mounts designed for direct installation. The unit includes a 12.1mm upper eye mount and a 12.1mm lower eye mount, along with an 18mm shaft for strength and durability. No boot or spring seat is included. The reservoir-equipped design helps the shock maintain fade-resistant performance during demanding use.\u003cbr\u003eCompatible with 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Ford F-150 models. Verify vehicle configuration and suspension requirements before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 8100 reservoir shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits select 2015–2024 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Large-bore 2.65-inch shock body with aerospace-quality billet components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube for consistent, fade-resistant damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: 60mm digressive piston for comfort and control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Included for increased oil capacity and heat management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValve Technology: Velocity-sensitive digressive valving tuned for the application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Upper and lower 12.1mm eye mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Grey\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft: 18mm diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 12.1mm\u003cbr\u003e\nSeries: B8 8100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nExtended Length (Mm): 700.0\u003cbr\u003e\nExtended Length (In): 27.56\u003cbr\u003e\nCollapsed Length (In): 16.99\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nCollapsed Length (Mm): 429.0\u003cbr\u003e\nUpper Mount Type: Eye 12.1mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL25-316773\u003cbr\u003e\nPart Number: 25-316773\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771390099565,"sku":"25316773","price":626.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-316773_1.jpg?v=1792221899"},{"product_id":"bilstein-b6-4600-monotube-front-shock-absorber-24-352871-for-2021-2026-ford-f-150","title":"Bilstein B6 4600 Monotube Front Shock Absorber 24-352871 for 2021-2026 Ford F-150","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the ride and handling of your stock-height light truck with the Bilstein B6 4600 shock absorber, part number 24-352871. Designed as a direct-fit replacement for the original equipment shock, this application-specific absorber is engineered for the 2021-2026 Ford F-150. The B6 4600 series delivers improved control, ride quality, and comfort without requiring lift or leveling modifications.\u003cbr\u003eThe 46mm monotube design provides consistent, fade-free performance by maintaining reliable damping during demanding driving conditions. A velocity-sensitive, digressive piston responds quickly to changing road surfaces, helping the suspension maintain tire contact and vehicle stability. Bilstein tunes each shock absorber for its specific application to support predictable handling and a controlled ride.\u003cbr\u003eThis Bilstein shock absorber features a smooth, non-coilover body with a durable yellow-painted finish, a crossbar lower mount, and a stem-style upper mount. The non-adjustable damping configuration is calibrated for the Ford F-150 application, while the included spring seat supports proper installation where required. The shock has no external reservoir or protective boot and is intended for use as a direct-fit suspension upgrade.\u003cbr\u003eThe Bilstein B6 4600 24-352871 has a 46mm piston diameter, an 18mm shaft, and 4.98 inches of stroke. Its collapsed length is 15.63 inches, and its extended length is 20.61 inches. This shock absorber is suitable for the listed 2021, 2022, 2023, 2024, 2025, and 2026 Ford F-150 applications. Installation should be performed using the vehicle manufacturer’s recommended procedures and appropriate safety equipment. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B6 4600\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-352871\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Segment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: 2021-2026 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: 46mm monotube construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 18mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable, application-specific tuning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Crossbar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 4.98 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 15.63 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 20.61 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nCollapsed Length (Mm): 397.0\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nStroke\/Travel Length (Mm): 126.5\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 523.5\u003cbr\u003e\nCollapsed Length (In): 15.63\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 20.61\u003cbr\u003e\nStroke\/Travel Length (In): 4.98\u003cbr\u003e\nAaiaid Part Number: BBGL24-352871\u003cbr\u003e\nPart Number: 24-352871\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771401076845,"sku":"24352871","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_1423c5c3-a166-4704-8d4f-0a5b8de94e07.jpg?v=1792222459"},{"product_id":"fabtech-k2386m-4-inch-lift-system-with-shocks-for-2021-2026-ford-f-150","title":"Fabtech K2386M 4-Inch Lift System with Shocks for 2021-2026 Ford F-150","description":"Basic Lift System w\/Shocks\n\u003cp\u003eUpgrade your truck’s suspension with the Fabtech K2386M Basic Lift System with Shocks, engineered for 2021 through 2026 Ford F-150 models. This complete suspension lift kit is designed to provide approximately 4 inches of lift while improving ground clearance and supporting a more capable off-road stance. The kit includes shocks to help deliver controlled suspension performance on varied terrain.\u003cbr\u003eFabtech draws on more than 20 years of aftermarket suspension engineering experience to develop products for demanding truck and off-road applications. The K2386M reflects the brand’s focus on precise suspension geometry, durable fabrication, and dependable performance. Fabtech uses advanced design software, fabrication equipment, experienced engineers, and extensive testing to produce suspension systems built for quality and long-term use.\u003cbr\u003eThe Fabtech K2386M is designed as an everything-you-need lift solution for compatible Ford F-150 applications, helping simplify the installation process and provide a cohesive suspension upgrade. Confirm vehicle configuration and application details before ordering to ensure compatibility. Professional installation is recommended, along with an alignment after installation to help maintain proper handling and tire wear. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4-inch suspension lift improves ground clearance and creates a more aggressive truck stance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes shocks for controlled ride and suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for 2021-2026 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech engineering supports dependable off-road suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComplete lift system helps simplify installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProfessional installation and post-installation alignment are recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 4\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNK2386M\u003cbr\u003e\nPart Number: K2386M\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771579957357,"sku":"K2386M","price":2052.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2386m-kit.jpg?v=1792224666"},{"product_id":"fabtech-k2386-4-inch-lift-kit-with-shocks-for-2021-2026-ford-f-150","title":"Fabtech K2386 4-Inch Lift Kit with Shocks for 2021-2026 Ford F-150","description":"Basic Lift System w\/Shocks\n\u003cp\u003eUpgrade the stance, ground clearance, and suspension performance of your truck with the Fabtech K2386 Basic Lift System with Shocks. Designed for the 2021-2026 Ford F-150, this complete 4-inch lift kit provides the essential components needed to raise your vehicle while supporting a controlled and capable ride. The included shocks help complement the lifted suspension and are engineered for dependable performance on the street and during off-road use.\u003cbr\u003eFabtech brings more than 20 years of aftermarket suspension development experience to the K2386 system. The brand uses advanced design software, modern fabrication equipment, experienced engineers, and rigorous testing to develop suspension products that meet demanding performance standards. Every component is designed with proper suspension geometry and long-term durability in mind, helping deliver a reliable installation for truck owners who want improved clearance without sacrificing everyday drivability.\u003cbr\u003eThe Fabtech K2386 lift system is a practical choice for drivers seeking a professionally engineered suspension upgrade for their Ford F-150. It is suitable for 2021, 2022, 2023, 2024, 2025, and 2026 model-year trucks and is built to provide a balanced combination of lifted appearance, enhanced underbody clearance, and suspension control. Professional installation is recommended to ensure correct fitment, alignment, and operation. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2386\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 4 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Basic suspension lift system with shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Compatibility: Fits 2021-2026 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance Design: Developed using advanced engineering, fabrication, and suspension testing processes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded Components: Lift system components and shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation and post-installation alignment recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProposition 65: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 4\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNK2386\u003cbr\u003e\nPart Number: K2386\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771580645485,"sku":"K2386","price":1969.02,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2386-kit.jpg?v=1792224679"},{"product_id":"zone-offroad-zonf1222-2-inch-leveling-kit-for-2021-2025-ford-f-150-2wd","title":"Zone Offroad ZONF1222 2-Inch Leveling Kit for 2021-2025 Ford F-150 2WD","description":"Zone 2\" Leveling Kit\n\u003cp\u003eLevel the front stance of your 2021-2025 Ford F-150 2WD with the Zone Offroad ZONF1222 2-inch leveling kit. Designed to improve the truck’s appearance while preserving factory ride quality and handling, this kit uses front strut spacers to provide a balanced, even stance without adding unnecessary complexity to the suspension system. It is engineered specifically for compatible Ford F-150 applications and provides clearance for tires up to 33 inches by 12.5 inches when properly matched with wheel and backspacing specifications.\u003cbr\u003eThe Zone Offroad ZONF1222 kit includes two-piece top-mount and strut-mount spacers, required mounting hardware, and step-by-step installation instructions. Its durable polyphthalamide construction is designed for dependable service, while the non-adjustable design keeps installation straightforward. No metal cutting or welding is required, making this a practical upgrade for truck owners using basic hand tools. Professional installation is recommended, and alignment should be checked after installation to help maintain proper tire wear and driving performance.\u003cbr\u003eInstallation typically takes approximately 2.5 hours and has a difficulty rating of 2 out of 5. The kit is compatible with select wheel configurations, including 18-inch by 9-inch and 20-inch by 9-inch wheels, with stock or 5.5-inch backspacing as applicable. This leveling kit fits 2021, 2022, 2023, 2024, and 2025 Ford F-150 2WD models. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFront Lift Height: 2 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Type: Leveling kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Lift Method: Strut spacers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Application: 2021-2025 Ford F-150 2WD\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaximum Tire Size: Up to 33 inches by 12.5 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Polyphthalamide\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Time: Approximately 2.5 hours\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Difficulty: 2 out of 5\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRequired Tools: Basic hand tools\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal Cutting Required: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWelding Required: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded Components: Two-piece top-mount and strut-mount spacers, mounting hardware, and installation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Maintains vehicle ride and handling performance\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBack Spacing: 5.5\"\u003cbr\u003e\nBack Spacing 2: Stock\u003cbr\u003e\nInstallation Time: 2.5 hrs\u003cbr\u003e\nAdjustable: No\u003cbr\u003e\nFront Lift Height: 2\"\u003cbr\u003e\nRear Lift Height: -\u003cbr\u003e\nFront Lift Method: Strut Spacers\u003cbr\u003e\nRear Lift Method: None\u003cbr\u003e\nLift Type: Leveling Kit\u003cbr\u003e\nMaterial: Polyphthalamide\u003cbr\u003e\nMax Tire Size: 33 x 12.5\u003cbr\u003e\nMax Tire Size 2: 33 x 12.5\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nRequires Welding: No\u003cbr\u003e\nWheel Size: 20 x 9\u003cbr\u003e\nWheel Size 2: 18 x 9\u003cbr\u003e\nInstallation Difficulty: 2 out of 5\u003cbr\u003e\nRequired Tools: Basic Hand Tools\u003cbr\u003e\nAaiaid Part Number: FQMSZONF1222\u003cbr\u003e\nPart Number: ZONF1222\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771580907629,"sku":"ZONF1222","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/F1222_01.jpg?v=1792224684"},{"product_id":"zone-offroad-zonf1205-2-inch-leveling-kit-for-2021-2025-ford-f-150","title":"Zone Offroad ZONF1205 2-Inch Leveling Kit for 2021-2025 Ford F-150","description":"Zone 2\" Leveling Kit\n\u003cp\u003eLevel the front stance of your 2021-2025 Ford F-150 with the Zone Offroad ZONF1205 2-inch leveling kit. Designed to improve the truck’s appearance while maintaining proper suspension function and handling, this kit raises the front end to create a more balanced stance and provides clearance for tires up to 33 x 12.5 inches, depending on wheel and tire specifications.\u003cbr\u003eThe Zone Offroad ZONF1205 uses a combination of top-mounted strut spacers and preload spacers to achieve the intended lift height without excessive suspension extension during droop travel. The kit includes two-piece top-mount and strut-mount spacers, mounting hardware, and step-by-step installation instructions. Its polyphthalamide construction is designed for dependable performance in demanding truck applications.\u003cbr\u003eInstallation requires no welding or metal cutting and typically takes approximately 2.5 hours. A strut compressor and standard wrenches are required, and the installation difficulty is rated 2 out of 5. The kit accommodates factory wheels and supports 20 x 9-inch wheels with 5.5 inches of backspacing, 18 x 9-inch wheels with stock backspacing, and stock wheels. Verify wheel, tire, and suspension clearance before installation.\u003cbr\u003eThis non-adjustable front leveling kit is engineered specifically for 2021, 2022, 2023, 2024, and 2025 Ford F-150 models. The Zone Offroad ZONF1205 is a practical suspension upgrade for truck owners seeking improved front-end clearance and a leveled appearance while retaining a straightforward installation process. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Zone Offroad\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: ZONF1205\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: 2021-2025 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Type: Front leveling kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Lift Height: 2 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Lift Method: Combination top-mounted strut and preload spacers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaximum Tire Size: Up to 33 x 12.5 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAccommodates Factory Wheels: Yes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWheel Compatibility: 20 x 9 inches with 5.5 inches of backspacing, 18 x 9 inches with stock backspacing, or stock wheels\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Polyphthalamide\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRequires Metal Cutting: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRequires Welding: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEstimated Installation Time: 2.5 hours\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Difficulty: 2 out of 5\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRequired Tools: Strut compressor and standard wrenches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded Components: Two-piece top-mount and strut-mount spacers, mounting hardware, and installation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nBack Spacing: 5.5\"\u003cbr\u003e\nBack Spacing 2: Stock\u003cbr\u003e\nBack Spacing 3: Stock\u003cbr\u003e\nAccommodates Factory Wheels: Yes\u003cbr\u003e\nInstallation Time: 2.5 hrs\u003cbr\u003e\nAdjustable: No\u003cbr\u003e\nFront Lift Height: 2\"\u003cbr\u003e\nRear Lift Height: -\u003cbr\u003e\nFront Lift Method: Strut Spacers\u003cbr\u003e\nLift Type: Leveling Kit\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nMaterial: Polyphthalamide\u003cbr\u003e\nMax Tire Size: 33 x 12.5\u003cbr\u003e\nMax Tire Size 2: 33 x 12.5\u003cbr\u003e\nMax Tire Size 3: 33 x 12.5\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nRequires Welding: No\u003cbr\u003e\nWheel Size: 20 x 9\u003cbr\u003e\nWheel Size 2: 18 x 9\u003cbr\u003e\nWheel Size 3: Stock\u003cbr\u003e\nInstallation Difficulty: 2 out of 5\u003cbr\u003e\nRequired Tools: Strut Compressor;  Wrenches: Standard\u003cbr\u003e\nAaiaid Part Number: FQMSZONF1205\u003cbr\u003e\nPart Number: ZONF1205\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771583463533,"sku":"ZONF1205","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/zon_f1205_ford_f150_leveling_kit_rotation_1.jpg?v=1792224734"},{"product_id":"fabtech-k2375dl-uniball-upper-control-arm-lift-system-with-dirt-logic-shocks-for-2021-2026-ford-f-150","title":"Fabtech K2375DL Uniball Upper Control Arm Lift System with Dirt Logic Shocks for 2021–2026 Ford F-150","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade the front suspension of your 2021–2026 Ford F-150 with the Fabtech K2375DL Uniball Lift System with Shocks. Designed to provide approximately 2 inches of lift and increased wheel travel, this heavy-duty suspension package improves off-road capability while maintaining a strong, reliable foundation for demanding driving conditions. The system combines tubular upper control arms with Dirt Logic coilover and rear shock technology for a complete suspension upgrade.\u003cbr\u003eThe tubular upper control arms are built from 1.25-inch outside-diameter chromoly tubing with a .120-inch wall thickness for enhanced strength and durability. Stainless steel Uniballs replace the factory-style upper ball joints and attach to the factory spindle without drilling, simplifying installation while providing improved articulation. This design helps eliminate common limitations associated with the factory upper control arm and supports increased suspension movement over rough terrain.\u003cbr\u003eThe Fabtech K2375DL system is engineered to work with Fabtech Dirt Logic 2.5 coilover shocks, which provide extensive ride tuning for improved control and suspension performance. Rear Dirt Logic 2.25 shocks complement the front system to help deliver balanced handling and a more capable off-road setup. The kit is designed specifically for the listed Ford F-150 applications and offers a durable solution for drivers seeking increased clearance, wheel travel, and suspension performance.\u003cbr\u003eThis Fabtech lift system is intended for the 2021, 2022, 2023, 2024, 2025, and 2026 Ford F-150. Professional installation is recommended to ensure proper fitment, alignment, and suspension setup. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLift Height: Approximately 2 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Upgrade: Complete Uniball upper control arm and shock system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eControl Arm Construction: Tubular chromoly steel with heavy-duty wall thickness\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniballs: Stainless steel Uniballs attach to the factory spindle without drilling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBall Joint Design: Eliminates the factory upper ball joint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Compatibility: Designed for Fabtech Dirt Logic 2.5 coilover shocks and rear Dirt Logic 2.25 shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOff-Road Performance: Increases wheel travel and enhances suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 2\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNK2375DL\u003cbr\u003e\nPart Number: K2375DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771586314349,"sku":"K2375DL","price":3520.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2375dl-beauty-640x427.jpg?v=1792224789"},{"product_id":"fabtech-k2374dl-uniball-upper-control-arm-lift-system-with-dirt-logic-shocks-for-2021-2026-ford-f-150","title":"Fabtech K2374DL Uniball Upper Control Arm Lift System with Dirt Logic Shocks for 2021-2026 Ford F-150","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade the front suspension performance of your 2021-2026 Ford F-150 with the Fabtech K2374DL Uniball Lift System with Shocks. This complete suspension package combines heavy-duty tubular upper control arms with tuned Dirt Logic coilover shocks to provide increased wheel travel, approximately 2 inches of lift, and improved off-road capability. The system is engineered for drivers who want enhanced suspension strength and control without extensive modifications to the factory spindle.\u003c\/p\u003e\n\u003cp\u003eThe Fabtech upper control arms are constructed from 1.25-inch outside-diameter, 0.120-inch-wall chromoly tubing for dependable strength in demanding terrain. Stainless steel Uniballs replace the factory upper ball joints and attach directly to the factory spindle without drilling. This design improves articulation and allows the suspension to better handle off-road impacts while maintaining a robust, serviceable connection.\u003c\/p\u003e\n\u003cp\u003eFront suspension performance is further enhanced by Fabtech Dirt Logic 2.5 coilover shocks, which are extensively tuned for responsive damping and controlled suspension movement. The package is designed to work with rear Dirt Logic 2.25 shocks, creating a balanced suspension upgrade for improved ride quality and handling on trails, rough roads, and other challenging surfaces. Installation should be completed by a qualified professional, and supporting components should be inspected before installation.\u003c\/p\u003e\n\u003cp\u003eFabtech part number K2374DL is designed for 2021, 2022, 2023, 2024, 2025, and 2026 Ford F-150 applications. The system eliminates the factory upper ball joint and is intended for compatible configurations listed by the manufacturer. This product contains a California Proposition 65 warning regarding cancer and reproductive harm. Review vehicle compatibility and installation requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\n\u003cli\u003ePart Number: K2374DL\u003c\/li\u003e\n\u003cli\u003eApplication: 2021-2026 Ford F-150\u003c\/li\u003e\n\u003cli\u003eLift Height: Approximately 2 inches\u003c\/li\u003e\n\u003cli\u003eUpper Control Arms: Heavy-duty tubular chromoly construction\u003c\/li\u003e\n\u003cli\u003eTube Construction: 1.25-inch outside diameter with 0.120-inch wall thickness\u003c\/li\u003e\n\u003cli\u003eUniballs: Stainless steel design for improved articulation and durability\u003c\/li\u003e\n\u003cli\u003eInstallation: Attaches to the factory spindle without drilling\u003c\/li\u003e\n\u003cli\u003eBall Joint Design: Eliminates the factory upper ball joint\u003c\/li\u003e\n\u003cli\u003eFront Shocks: Dirt Logic 2.5 coilover shocks\u003c\/li\u003e\n\u003cli\u003eSuspension Compatibility: Designed to work with rear Dirt Logic 2.25 shocks\u003c\/li\u003e\n\u003cli\u003eWarning: California Proposition 65 warning for cancer and reproductive harm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 2\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNK2374DL\u003cbr\u003e\nPart Number: K2374DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771587100781,"sku":"K2374DL","price":3074.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2374dl-beauty-640x427.jpg?v=1792224805"},{"product_id":"fabtech-k2371m-6-inch-basic-lift-system-with-shocks-for-2021-2026-ford-f-150","title":"Fabtech K2371M 6-Inch Basic Lift System with Shocks for 2021-2026 Ford F-150","description":"Basic Lift System w\/Shocks\n\u003cp\u003eUpgrade your 2021-2026 Ford F-150 with the Fabtech K2371M Basic Lift System with Shocks, engineered to deliver approximately 6 inches of lift while maintaining dependable on-road drivability and off-road capability. Fabtech’s proven independent front suspension design helps eliminate bump steer throughout the suspension cycle, reducing driver fatigue and improving vehicle control. The near-stock track width keeps the tires positioned beneath the fenders for a clean, functional appearance, while proprietary steering knuckle geometry provides a strong lock-to-lock turning radius for maneuvering in tight areas.\u003cbr\u003eThe system includes heavy-duty 1\/4-inch steel crossmembers equipped with eccentric-style alignment cams for convenient adjustment and accurate suspension setup. Triple front differential mounts reposition the differential to help support smooth, vibration-free operation at highway speeds. Factory coilover shocks are relocated from the lower mounting position to provide full steering clearance while achieving the desired lift height without over-cycling the suspension. At the rear, the factory 2-inch block is replaced with a 5-inch block and U-bolt system to maintain proper stance and suspension geometry.\u003cbr\u003eFabtech designed the K2371M to address wheel travel, steering clearance, alignment, and overall suspension performance as a complete system. The kit includes the components needed to lift the vehicle and comes with Fabtech’s free 5-year or 60,000-mile Powertrain Warranty for added confidence. Professional installation is recommended, and alignment should be checked after installation. This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov. Fits 2021, 2022, 2023, 2024, 2025, and 2026 Ford F-150 models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2371M\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: Approximately 6 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Design: Independent front suspension engineered for on-road comfort and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteering Control: Proprietary steering knuckle geometry supports excellent lock-to-lock turning radius\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBump Steer Reduction: Suspension geometry helps minimize bump steer throughout the suspension cycle\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCrossmembers: Heavy-duty 1\/4-inch steel crossmembers with eccentric-style alignment cams\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDifferential Mounts: Triple front differential mounts help support vibration-free operation at highway speeds\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Relocation: Factory coilover shocks are relocated to provide full steering clearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Lift Components: Includes a 5-inch rear block and U-bolt system to replace the factory 2-inch block\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Includes Fabtech’s free 5-year or 60,000-mile Powertrain Warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Fits 2021-2026 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation and post-installation alignment are recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 6\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2371M\u003cbr\u003e\nPart Number: K2371M\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771588804717,"sku":"K2371M","price":2605.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2371m-beauty-01.jpg?v=1792224828"},{"product_id":"fabtech-k2371-6-inch-lift-system-with-shocks-for-2021-2026-ford-f-150","title":"Fabtech K2371 6-Inch Lift System with Shocks for 2021-2026 Ford F-150","description":"Basic Lift System w\/Shocks\n\u003cp\u003eUpgrade your 2021-2026 Ford F-150 with the Fabtech K2371 Basic Lift System with Shocks. Designed around Fabtech’s proven independent front suspension engineering, this complete lift kit delivers approximately 6 inches of lift while maintaining confident handling on both paved roads and off-road terrain. The system is engineered to eliminate bump steer throughout the suspension cycle, helping reduce driver fatigue and improve overall vehicle drivability. Its near-stock track width keeps the tires positioned beneath the factory fenders for a clean, practical appearance.\u003cbr\u003eThe Fabtech K2371 features proprietary steering knuckle geometry for an excellent lock-to-lock turning radius, making it easier to maneuver in tight spaces. Heavy-duty 1\/4-inch steel crossmembers provide strength and incorporate eccentric-style alignment cams for straightforward adjustment. Triple front differential mounts reposition the differential to help support smooth, vibration-free operation at highway speeds. The factory coilover shocks are relocated from the lower mounting position to provide full steering clearance while achieving the desired lift height without over-cycling the suspension.\u003cbr\u003eAt the rear, the factory 2-inch block is replaced with a 5-inch block and matching U-bolt system to maintain proper suspension geometry and wheel travel. Every component is selected to support balanced suspension performance, steering clearance, and reliable operation. The kit includes shocks and the components needed for a complete vehicle lift, making it a practical solution for drivers seeking increased ground clearance and a more capable stance. Fabtech also includes a complimentary 5-year or 60,000-mile Powertrain Warranty for added confidence. Professional installation and alignment are recommended. This product may require less-than-truckload freight shipping. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e6-inch lift system designed for 2021-2026 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes shocks for a complete suspension upgrade\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech independent front suspension design supports on-road and off-road drivability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineered to reduce bump steer throughout the suspension cycle\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNear-stock track width helps keep tires beneath the fenders\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProprietary steering knuckle geometry provides strong lock-to-lock turning radius\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHeavy-duty 1\/4-inch steel crossmembers with eccentric-style alignment cams\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple front differential mounts help reduce high-speed drivetrain vibration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRelocated factory coilover shocks provide full steering clearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear 5-inch block and U-bolt system replaces the factory 2-inch block\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned to preserve proper wheel travel and steering operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes a complimentary 5-year or 60,000-mile Powertrain Warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 6\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2371\u003cbr\u003e\nPart Number: K2371\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771590213741,"sku":"K2371","price":2521.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2371-beauty-02-640x427.jpg?v=1792224847"},{"product_id":"zone-offroad-nitro-smooth-body-shock-zon7828-for-2014-2023-ford-f-150","title":"Zone Offroad Nitro Smooth Body Shock ZON7828 for 2014-2024 Ford F-150","description":"Zone Nitro Smooth Body Shock\n\u003cp\u003eUpgrade the suspension performance of your 2014–2023 Ford F-150 with the Zone Offroad Nitro Smooth Body Shock, part number ZON7828. Designed for stock-like control on and off the road, this vehicle-specific shock absorber uses fully displaced valving to improve compression and extension travel. Its twin-tube construction and nitrogen-charged design deliver dependable damping response across changing road and trail conditions, making it a practical replacement for worn or underperforming shocks.\u003cbr\u003eThe Nitro Series shock is pressurized with 50 psi of nitrogen gas to support quick response and help reduce aeration during demanding suspension movement. A special Fluon-banded piston promotes consistent operation, while the 10-stage velocity-sensitive valving helps the shock adapt to varying impact speeds. The steel construction is built for durable service, and the shock is suitable for vehicles with any lift height. It is not tunable and does not require metal cutting for installation.\u003cbr\u003eThis Zone Offroad shock absorber includes the required bushings and sleeves and is sold individually. Both the upper and lower mounts use the EB1 configuration for application-specific installation. With an installation difficulty rating of 1 out of 5 and an estimated installation time of approximately 30 minutes, it is a straightforward suspension service component for compatible Ford F-150 applications. The product measures 18.20 inches when compressed and 31.00 inches when extended, with a 2-3\/8-inch body diameter. Fits 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023 Ford F-150 models. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Zone Offroad\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: ZON7828\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Nitro\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Twin-tube, nitrogen-charged shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving: 10-stage velocity-sensitive valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGas Charge: 50 psi nitrogen for quick response and reduced aeration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: Fluon-banded piston for consistent performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Steel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Compatibility: Suitable for any lift height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: EB1 upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: No metal cutting required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Difficulty: Rated 1 out of 5\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Time: Approximately 30 minutes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eService: Sold individually with bushings and sleeves\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: 2014–2023 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nMaterial: Steel\u003cbr\u003e\nFor Use With Lift Heights: Any\u003cbr\u003e\nSeries: Nitro\u003cbr\u003e\nInstallation Difficulty: 1 out of 5\u003cbr\u003e\nInstallation Time: 0.5\u003cbr\u003e\nShock Compressed Length: 18.20\u003cbr\u003e\nShock Extended Length: 31.00\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nTechnology: Twin Tube\u003cbr\u003e\nTunable: No\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: EB1\u003cbr\u003e\nUpper Mount Type: EB1\u003cbr\u003e\nBody Diameter: 2-3\/8\"\u003cbr\u003e\nAaiaid Part Number: FQMSZON7828\u003cbr\u003e\nPart Number: ZON7828\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2014\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771604697197,"sku":"ZON7828","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/zone_nitro-series-gas-shock-pr_de8fbe0d-4076-4340-8e5e-5f5c28fda490.jpg?v=1792225113"},{"product_id":"zone-offroad-nitro-smooth-body-shock-absorber-zon7763","title":"Zone Offroad Nitro Smooth Body Shock Absorber ZON7763","description":"Zone Nitro Smooth Body Shock\n\u003cp\u003eThe Zone Offroad Nitro Smooth Body Shock Absorber, Part Number ZON7763, is designed to provide stock-like control with dependable performance on both paved roads and off-road terrain. Vehicle-specific valving is engineered for balanced compression and extension travel, helping improve ride control across changing surfaces. This shock absorber is sold individually and includes the required bushings and sleeves.\u003c\/p\u003e\n\u003cp\u003eThe twin-tube, nitrogen-charged design uses a 50 psi nitrogen gas charge to support quick response while reducing aeration during demanding driving conditions. Its 10-stage velocity-sensitive valving automatically responds to suspension movement, delivering consistent damping performance without requiring manual tuning. A Fluon-banded piston supports smooth operation and long-term durability, while the steel construction provides dependable service for lifted or stock-height applications.\u003c\/p\u003e\n\u003cp\u003eInstallation is rated easy, with no metal cutting required, and the estimated installation time is approximately 30 minutes. The Zone Offroad ZON7763 uses EB1 upper and lower mounts and is compatible with any lift height. It fits select 2012–2015 Ford F-150 models and 2012–2015 Ford F-250 and F-350 Super Duty applications; verify vehicle fitment before ordering. This product is covered by a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVehicle-specific valving provides balanced compression and extension control\u003c\/li\u003e\n\u003cli\u003eTwin-tube, nitrogen-charged design supports consistent on-road and off-road performance\u003c\/li\u003e\n\u003cli\u003e50 psi nitrogen charge helps reduce aeration and improve response\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving adapts to suspension movement\u003c\/li\u003e\n\u003cli\u003eFluon-banded piston promotes smooth operation and durability\u003c\/li\u003e\n\u003cli\u003eSteel construction provides dependable long-term service\u003c\/li\u003e\n\u003cli\u003eCompatible with any lift height\u003c\/li\u003e\n\u003cli\u003eEB1 upper and lower mounting configuration\u003c\/li\u003e\n\u003cli\u003eEasy installation with no metal cutting required\u003c\/li\u003e\n\u003cli\u003eSold individually with bushings and sleeves included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nMaterial: Steel\u003cbr\u003e\nFor Use With Lift Heights: Any\u003cbr\u003e\nSeries: Nitro\u003cbr\u003e\nInstallation Difficulty: 1 out of 5\u003cbr\u003e\nInstallation Time: 0.5\u003cbr\u003e\nShock Compressed Length: 19.27\u003cbr\u003e\nShock Extended Length: 33.00\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nTechnology: Twin Tube\u003cbr\u003e\nTunable: No\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: EB1\u003cbr\u003e\nUpper Mount Type: EB1\u003cbr\u003e\nBody Diameter: 2-3\/8\"\u003cbr\u003e\nAaiaid Part Number: FQMSZON7763\u003cbr\u003e\nPart Number: ZON7763\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2004\u003cbr\u003e\nFord F-150  2005\u003cbr\u003e\nFord F-150  2006\u003cbr\u003e\nFord F-150  2007\u003cbr\u003e\nFord F-150  2008\u003cbr\u003e\nFord F-150  2009\u003cbr\u003e\nFord F-150  2010\u003cbr\u003e\nFord F-150  2011\u003cbr\u003e\nFord F-150  2012\u003cbr\u003e\nFord F-150  2013\u003cbr\u003e\nFord F-150  2014\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-250 Super Duty  1999\u003cbr\u003e\nFord F-250 Super Duty  2000\u003cbr\u003e\nFord F-250 Super Duty  2001\u003cbr\u003e\nFord F-250 Super Duty  2002\u003cbr\u003e\nFord F-250 Super Duty  2003\u003cbr\u003e\nFord F-250 Super Duty  2004\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-250 Super Duty  2009\u003cbr\u003e\nFord F-250 Super Duty  2010\u003cbr\u003e\nFord F-250 Super Duty  2011\u003cbr\u003e\nFord F-250 Super Duty  2012\u003cbr\u003e\nFord F-250 Super Duty  2013\u003cbr\u003e\nFord F-250 Super Duty  2014\u003cbr\u003e\nFord F-250 Super Duty  2015\u003cbr\u003e\nFord F-250 Super Duty  2016\u003cbr\u003e\nFord F-350 Super Duty  1999\u003cbr\u003e\nFord F-350 Super Duty  2000\u003cbr\u003e\nFord F-350 Super Duty  2001\u003cbr\u003e\nFord F-350 Super Duty  2002\u003cbr\u003e\nFord F-350 Super Duty  2003\u003cbr\u003e\nFord F-350 Super Duty  2004\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2009\u003cbr\u003e\nFord F-350 Super Duty  2010\u003cbr\u003e\nFord F-350 Super Duty  2011\u003cbr\u003e\nFord F-350 Super Duty  2012\u003cbr\u003e\nFord F-350 Super Duty  2013\u003cbr\u003e\nFord F-350 Super Duty  2014\u003cbr\u003e\nFord F-350 Super Duty  2015\u003cbr\u003e\nFord F-350 Super Duty  2016","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771610792045,"sku":"ZON7763","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/zone_nitro-series-gas-shock-pr_c0b0e486-3583-4a17-bd4e-f25cce4c144b.jpg?v=1792225217"},{"product_id":"skyjacker-adx-m2-0-adventure-series-aluminum-monotube-shock-m2099","title":"Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock M2099","description":"\u003cp\u003eUpgrade your truck’s suspension performance with the Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock, part number M2099. Designed with technology inspired by off-road racing, this gas-charged shock absorber uses a full-displaced valving system to provide consistent damping, improved control, cooler operation, and a more comfortable driving experience. Its aluminum body helps support efficient heat management during demanding on-road and off-road use.\u003cbr\u003eThe Skyjacker ADX M2.0 shock features loop, or eyelet, bushing-and-sleeve mounts at both the upper and lower ends for a secure installation when matched with the appropriate vehicle suspension configuration. The monotube design delivers responsive damping characteristics, while the non-reservoir construction offers a streamlined fit for applications that do not require a remote reservoir. This shock is engineered for drivers seeking improved suspension control and dependable performance in challenging conditions.\u003cbr\u003eThe Skyjacker M2099 is designed to fit select Ford trucks, including the 2012–2015 Ford F-250 Super Duty, 2012–2015 Ford F-350 Super Duty, and 2012–2014 Ford F-150, subject to the specific vehicle application and suspension setup. Verify vehicle fitment before installation. The shock has a 14-inch stroke, a 21.5-inch compressed length, and a 35.5-inch extended length. A protective boot is not included. This product carries a California Proposition 65 cancer warning.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFull-Displaced Valve System: Off-road racing-inspired valving provides consistent damping and enhanced suspension control.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum Monotube Body: Supports cooler operation and reliable performance under demanding driving conditions.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGas Charged: Helps deliver responsive damping and improved ride control.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLoop Eyelet Mounts: Upper and lower bushing-and-sleeve mounts support secure installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 14 inches for controlled suspension movement.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompressed Length: 21.5 inches.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 35.5 inches.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote Reservoir: Not included.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtective Boot: Not included.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Fits select 2012–2015 Ford F-250 Super Duty, 2012–2015 Ford F-350 Super Duty, and 2012–2014 Ford F-150 applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Long Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65 Y\/N: N\u003cbr\u003e\nUpper Mount Type: Loop (Eyelet) Bushing and Sleeve\u003cbr\u003e\nGas Charged: Yes\u003cbr\u003e\nShock Stroke: 14.0 in\u003cbr\u003e\nCompressed Length: 21.5 in\u003cbr\u003e\nRemote Reservoir: No\u003cbr\u003e\nExtended Length: 35.5 in\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nLower Mount Type: Loop (Eyelet) Bushing and Sleeve\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nBody Diameter: 2.11 in\u003cbr\u003e\nAaiaid Part Number: BHNGM2099\u003cbr\u003e\nPart Number: M2099\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2004\u003cbr\u003e\nFord F-150  2005\u003cbr\u003e\nFord F-150  2006\u003cbr\u003e\nFord F-150  2007\u003cbr\u003e\nFord F-150  2008\u003cbr\u003e\nFord F-150  2009\u003cbr\u003e\nFord F-150  2010\u003cbr\u003e\nFord F-150  2011\u003cbr\u003e\nFord F-150  2012\u003cbr\u003e\nFord F-150  2013\u003cbr\u003e\nFord F-150  2014\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-250 Super Duty  1999\u003cbr\u003e\nFord F-250 Super Duty  2000\u003cbr\u003e\nFord F-250 Super Duty  2001\u003cbr\u003e\nFord F-250 Super Duty  2002\u003cbr\u003e\nFord F-250 Super Duty  2003\u003cbr\u003e\nFord F-250 Super Duty  2004\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-250 Super Duty  2009\u003cbr\u003e\nFord F-250 Super Duty  2010\u003cbr\u003e\nFord F-250 Super Duty  2011\u003cbr\u003e\nFord F-250 Super Duty  2012\u003cbr\u003e\nFord F-250 Super Duty  2013\u003cbr\u003e\nFord F-250 Super Duty  2014\u003cbr\u003e\nFord F-250 Super Duty  2015\u003cbr\u003e\nFord F-250 Super Duty  2016\u003cbr\u003e\nFord F-350 Super Duty  1999\u003cbr\u003e\nFord F-350 Super Duty  2000\u003cbr\u003e\nFord F-350 Super Duty  2001\u003cbr\u003e\nFord F-350 Super Duty  2002\u003cbr\u003e\nFord F-350 Super Duty  2003\u003cbr\u003e\nFord F-350 Super Duty  2004\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2009\u003cbr\u003e\nFord F-350 Super Duty  2010\u003cbr\u003e\nFord F-350 Super Duty  2011\u003cbr\u003e\nFord F-350 Super Duty  2012\u003cbr\u003e\nFord F-350 Super Duty  2013\u003cbr\u003e\nFord F-350 Super Duty  2014\u003cbr\u003e\nFord F-350 Super Duty  2015\u003cbr\u003e\nFord F-350 Super Duty  2016","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771700871277,"sku":"M2099","price":176.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/M2099.jpg?v=1792227377"},{"product_id":"trailfx-f15ll2-1-5-inch-leveling-kit-for-2015-2024-ford-f-150","title":"TrailFX F15LL2 1.5-Inch Leveling Kit for 2015-2024 Ford F-150","description":"Black, Aluminum\n\u003cp\u003eImprove the stance and front-end clearance of your truck with the TrailFX F15LL2 Leveling Kit Suspension. Designed for 2015–2024 Ford F-150 models, this performance-grade kit provides a 1.5-inch lift using durable black aluminum strut assembly extensions. The kit is engineered to help eliminate ball joint, tie rod, and steering bind while maintaining ride quality and dependable handling.\u003cbr\u003eInstallation is straightforward and does not require drilling or cutting. TrailFX includes the necessary mounting hardware and fittings for a clean, secure installation, with an estimated installation time of approximately one hour. The kit does not include shocks or struts, allowing you to use your existing suspension components when appropriate. Its design is intended to provide additional tire clearance and a more level appearance without the complexity of a complete suspension replacement.\u003cbr\u003eThe TrailFX F15LL2 supports tires up to 33 x 12.00 inches when used with compatible wheel and suspension combinations. It requires a minimum 17-inch wheel, with a recommended 5.50-inch wheel backspacing and zero-millimeter offset. Finished in black and manufactured from aluminum, this leveling kit is built for long-term durability in demanding driving conditions. TrailFX backs the kit with a limited lifetime warranty for added confidence. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.p65warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: TrailFX\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: F15LL2\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2015–2024 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 1.5 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Strut assembly extension leveling kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Black\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaximum Tire Size: 33 x 12.00 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMinimum Wheel Diameter: 17 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWheel Backspacing: 5.50 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWheel Offset: 0 millimeters\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Hardware: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFittings: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShocks or Struts: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: No drilling or cutting required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEstimated Installation Time: Approximately 1 hour\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Limited lifetime warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Leveling Kit Suspension\u003cbr\u003e\nAmount Raised Or Lowered: 1-1\/2 Inch Lift\u003cbr\u003e\nType: Strut Assembly Extension\u003cbr\u003e\nMaximum Tire Size: 33 x 12.00\u003cbr\u003e\nMinimum Wheel Diameter: 17\u003cbr\u003e\nWheel Offset (Mm): 0\u003cbr\u003e\nWheel Backspacing (In): 5.50\u003cbr\u003e\nIncludes Shock\/Struts: No\u003cbr\u003e\nColor: Black\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nEstimated Install Time (Hours): 1\u003cbr\u003e\nProp 65 Y\/N: Y\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003cbr\u003e\nMaximum Lift: 1.5 in\u003cbr\u003e\nShocks Included: No\u003cbr\u003e\nSelf Leveling Switch Included: No\u003cbr\u003e\nPressure Sensor Included: No\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nAir Lines Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nFittings Included: Yes\u003cbr\u003e\nDash Panel Included: No\u003cbr\u003e\nCompressor Included: No\u003cbr\u003e\nBellows Material: Aluminum\u003cbr\u003e\nBellows Color: Black\u003cbr\u003e\nWiring Harness Included: No\u003cbr\u003e\nAaiaid Part Number: DXTXF15LL2\u003cbr\u003e\nPart Number: F15LL2\u003cbr\u003e\nBrand Aaia: DXTX\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024","brand":"TrailFX","offers":[{"title":"Default Title","offer_id":67771712897133,"sku":"F15LL2","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/T8S_F15LL2_LEVELING_20KIT_WEB_1.jpg?v=1792227679"},{"product_id":"skyjacker-adx-m2-0-adventure-series-aluminum-monotube-shock-m2060","title":"Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock M2060","description":"\u003cp\u003eUpgrade your truck’s suspension performance with the Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock, part number M2060. Designed with modern, race-inspired technology, this gas-charged shock absorber uses an innovative full-displaced valving system to provide consistent damping, improved control, enhanced ride comfort, and dependable performance during demanding on-road and off-road driving.\u003cbr\u003eThe ADX M2.0 aluminum monotube design promotes improved heat dissipation, helping the shock run cooler during extended use and repeated suspension cycling. Its aluminum body combines strength with effective thermal management, while the precision valving helps maintain responsive damping across changing terrain and driving conditions. This shock features an 11.0-inch stroke and is built without a remote reservoir or protective boot.\u003cbr\u003eInstallation is supported by loop-style eyelet bushing and sleeve mounts at both the upper and lower ends. The Skyjacker M2060 is designed for select Ford trucks, including the 2012–2015 Ford F-250 Super Duty, 2012–2015 Ford F-350 Super Duty, and 2012–2014 Ford F-150. Verify vehicle application and suspension configuration before ordering to ensure proper fitment. Professional installation is recommended when required by the vehicle or suspension setup.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAluminum Monotube Body: Promotes better heat dissipation for cooler operation and consistent performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFull-Displaced Valving: Race-inspired valving technology provides controlled, consistent damping.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGas Charged: Helps improve suspension response and driving control.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 11.0 inches for capable suspension movement.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 29.8 inches.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompressed Length: 18.8 inches.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Loop eyelet bushing and sleeve design.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Loop eyelet bushing and sleeve design.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote Reservoir: Not included.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select 2012–2015 Ford F-250 Super Duty and Ford F-350 Super Duty models, plus select 2012–2014 Ford F-150 models.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Long Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65 Y\/N: N\u003cbr\u003e\nUpper Mount Type: Loop (Eyelet) Bushing and Sleeve\u003cbr\u003e\nGas Charged: Yes\u003cbr\u003e\nShock Stroke: 11.0 in\u003cbr\u003e\nCompressed Length: 18.8 in\u003cbr\u003e\nRemote Reservoir: No\u003cbr\u003e\nExtended Length: 29.8 in\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nLower Mount Type: Loop (Eyelet) Bushing and Sleeve\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nBody Diameter: 2.11 in\u003cbr\u003e\nAaiaid Part Number: BHNGM2060\u003cbr\u003e\nPart Number: M2060\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Blazer  1969\u003cbr\u003e\nChevrolet Blazer  1970\u003cbr\u003e\nChevrolet Blazer  1971\u003cbr\u003e\nChevrolet Blazer  1972\u003cbr\u003e\nChevrolet Blazer  1973\u003cbr\u003e\nChevrolet Blazer  1974\u003cbr\u003e\nChevrolet Blazer  1987\u003cbr\u003e\nChevrolet Blazer  1988\u003cbr\u003e\nChevrolet Blazer  1989\u003cbr\u003e\nChevrolet Blazer  1990\u003cbr\u003e\nChevrolet Blazer  1991\u003cbr\u003e\nChevrolet K10  1975\u003cbr\u003e\nChevrolet K10  1976\u003cbr\u003e\nChevrolet K10  1977\u003cbr\u003e\nChevrolet K10  1978\u003cbr\u003e\nChevrolet K10  1979\u003cbr\u003e\nChevrolet K10  1980\u003cbr\u003e\nChevrolet K10  1981\u003cbr\u003e\nChevrolet K10  1982\u003cbr\u003e\nChevrolet K10  1983\u003cbr\u003e\nChevrolet K10  1984\u003cbr\u003e\nChevrolet K10  1985\u003cbr\u003e\nChevrolet K10  1986\u003cbr\u003e\nChevrolet K10 Pickup  1967\u003cbr\u003e\nChevrolet K10 Pickup  1968\u003cbr\u003e\nChevrolet K10 Pickup  1969\u003cbr\u003e\nChevrolet K10 Pickup  1970\u003cbr\u003e\nChevrolet K10 Pickup  1971\u003cbr\u003e\nChevrolet K10 Pickup  1972\u003cbr\u003e\nChevrolet K10 Pickup  1973\u003cbr\u003e\nChevrolet K10 Pickup  1974\u003cbr\u003e\nChevrolet K10 Suburban  1968\u003cbr\u003e\nChevrolet K10 Suburban  1969\u003cbr\u003e\nChevrolet K10 Suburban  1970\u003cbr\u003e\nChevrolet K10 Suburban  1971\u003cbr\u003e\nChevrolet K10 Suburban  1972\u003cbr\u003e\nChevrolet K10 Suburban  1973\u003cbr\u003e\nChevrolet K10 Suburban  1974\u003cbr\u003e\nChevrolet K10 Suburban  1975\u003cbr\u003e\nChevrolet K10 Suburban  1976\u003cbr\u003e\nChevrolet K10 Suburban  1977\u003cbr\u003e\nChevrolet K10 Suburban  1978\u003cbr\u003e\nChevrolet K10 Suburban  1979\u003cbr\u003e\nChevrolet K10 Suburban  1980\u003cbr\u003e\nChevrolet K10 Suburban  1981\u003cbr\u003e\nChevrolet K10 Suburban  1982\u003cbr\u003e\nChevrolet K10 Suburban  1983\u003cbr\u003e\nChevrolet K10 Suburban  1984\u003cbr\u003e\nChevrolet K10 Suburban  1985\u003cbr\u003e\nChevrolet K10 Suburban  1986\u003cbr\u003e\nChevrolet K20  1975\u003cbr\u003e\nChevrolet K20  1976\u003cbr\u003e\nChevrolet K20  1977\u003cbr\u003e\nChevrolet K20  1978\u003cbr\u003e\nChevrolet K20  1979\u003cbr\u003e\nChevrolet K20  1980\u003cbr\u003e\nChevrolet K20  1981\u003cbr\u003e\nChevrolet K20  1982\u003cbr\u003e\nChevrolet K20  1983\u003cbr\u003e\nChevrolet K20  1984\u003cbr\u003e\nChevrolet K20  1985\u003cbr\u003e\nChevrolet K20  1986\u003cbr\u003e\nChevrolet K20 Pickup  1967\u003cbr\u003e\nChevrolet K20 Pickup  1968\u003cbr\u003e\nChevrolet K20 Pickup  1969\u003cbr\u003e\nChevrolet K20 Pickup  1970\u003cbr\u003e\nChevrolet K20 Pickup  1971\u003cbr\u003e\nChevrolet K20 Pickup  1972\u003cbr\u003e\nChevrolet K20 Pickup  1973\u003cbr\u003e\nChevrolet K20 Pickup  1974\u003cbr\u003e\nChevrolet K20 Suburban  1968\u003cbr\u003e\nChevrolet K20 Suburban  1969\u003cbr\u003e\nChevrolet K20 Suburban  1970\u003cbr\u003e\nChevrolet K20 Suburban  1971\u003cbr\u003e\nChevrolet K20 Suburban  1972\u003cbr\u003e\nChevrolet K20 Suburban  1973\u003cbr\u003e\nChevrolet K20 Suburban  1974\u003cbr\u003e\nChevrolet K20 Suburban  1975\u003cbr\u003e\nChevrolet K20 Suburban  1976\u003cbr\u003e\nChevrolet K20 Suburban  1977\u003cbr\u003e\nChevrolet K20 Suburban  1978\u003cbr\u003e\nChevrolet K20 Suburban  1979\u003cbr\u003e\nChevrolet K20 Suburban  1980\u003cbr\u003e\nChevrolet K20 Suburban  1981\u003cbr\u003e\nChevrolet K20 Suburban  1982\u003cbr\u003e\nChevrolet K20 Suburban  1983\u003cbr\u003e\nChevrolet K20 Suburban  1984\u003cbr\u003e\nChevrolet K20 Suburban  1985\u003cbr\u003e\nChevrolet K30  1977\u003cbr\u003e\nChevrolet K30  1978\u003cbr\u003e\nChevrolet K30  1979\u003cbr\u003e\nChevrolet K30  1980\u003cbr\u003e\nChevrolet K30  1981\u003cbr\u003e\nChevrolet K30  1982\u003cbr\u003e\nChevrolet K30  1983\u003cbr\u003e\nChevrolet K30  1984\u003cbr\u003e\nChevrolet K30  1985\u003cbr\u003e\nChevrolet K30  1986\u003cbr\u003e\nChevrolet K5 Blazer  1975\u003cbr\u003e\nChevrolet K5 Blazer  1976\u003cbr\u003e\nChevrolet K5 Blazer  1977\u003cbr\u003e\nChevrolet K5 Blazer  1978\u003cbr\u003e\nChevrolet K5 Blazer  1979\u003cbr\u003e\nChevrolet K5 Blazer  1980\u003cbr\u003e\nChevrolet K5 Blazer  1981\u003cbr\u003e\nChevrolet K5 Blazer  1982\u003cbr\u003e\nChevrolet K5 Blazer  1983\u003cbr\u003e\nChevrolet K5 Blazer  1984\u003cbr\u003e\nChevrolet K5 Blazer  1985\u003cbr\u003e\nChevrolet K5 Blazer  1986\u003cbr\u003e\nFord Bronco  1966\u003cbr\u003e\nFord Bronco  1967\u003cbr\u003e\nFord Bronco  1968\u003cbr\u003e\nFord Bronco  1969\u003cbr\u003e\nFord Bronco  1970\u003cbr\u003e\nFord Bronco  1971\u003cbr\u003e\nFord Bronco  1972\u003cbr\u003e\nFord Bronco  1973\u003cbr\u003e\nFord Bronco  1974\u003cbr\u003e\nFord Bronco  1975\u003cbr\u003e\nFord Bronco  1976\u003cbr\u003e\nFord Bronco  1977\u003cbr\u003e\nFord Bronco  1978\u003cbr\u003e\nFord Bronco  1979\u003cbr\u003e\nFord Bronco  1980\u003cbr\u003e\nFord Bronco  1981\u003cbr\u003e\nFord Bronco  1982\u003cbr\u003e\nFord Bronco  1983\u003cbr\u003e\nFord Bronco  1984\u003cbr\u003e\nFord Bronco  1985\u003cbr\u003e\nFord Bronco  1986\u003cbr\u003e\nFord Bronco  1987\u003cbr\u003e\nFord Bronco  1988\u003cbr\u003e\nFord Bronco  1989\u003cbr\u003e\nFord Bronco  1990\u003cbr\u003e\nFord Bronco  1991\u003cbr\u003e\nFord Bronco  1992\u003cbr\u003e\nFord Bronco  1993\u003cbr\u003e\nFord Bronco  1994\u003cbr\u003e\nFord Bronco  1995\u003cbr\u003e\nFord Bronco  1996\u003cbr\u003e\nFord Excursion  2000\u003cbr\u003e\nFord Excursion  2001\u003cbr\u003e\nFord Excursion  2002\u003cbr\u003e\nFord Excursion  2003\u003cbr\u003e\nFord Excursion  2004\u003cbr\u003e\nFord Excursion  2005\u003cbr\u003e\nFord F-100  1965\u003cbr\u003e\nFord F-100  1966\u003cbr\u003e\nFord F-100  1967\u003cbr\u003e\nFord F-100  1968\u003cbr\u003e\nFord F-100  1969\u003cbr\u003e\nFord F-100  1970\u003cbr\u003e\nFord F-100  1971\u003cbr\u003e\nFord F-100  1972\u003cbr\u003e\nFord F-100  1973\u003cbr\u003e\nFord F-100  1974\u003cbr\u003e\nFord F-100  1975\u003cbr\u003e\nFord F-100  1976\u003cbr\u003e\nFord F-150  1980\u003cbr\u003e\nFord F-150  1981\u003cbr\u003e\nFord F-150  1982\u003cbr\u003e\nFord F-150  1983\u003cbr\u003e\nFord F-150  1984\u003cbr\u003e\nFord F-150  1985\u003cbr\u003e\nFord F-150  1986\u003cbr\u003e\nFord F-150  1987\u003cbr\u003e\nFord F-150  1988\u003cbr\u003e\nFord F-150  1989\u003cbr\u003e\nFord F-150  1990\u003cbr\u003e\nFord F-150  1991\u003cbr\u003e\nFord F-150  1992\u003cbr\u003e\nFord F-150  1993\u003cbr\u003e\nFord F-150  1994\u003cbr\u003e\nFord F-150  1995\u003cbr\u003e\nFord F-150  1996\u003cbr\u003e\nFord F-150  2004\u003cbr\u003e\nFord F-150  2005\u003cbr\u003e\nFord F-150  2006\u003cbr\u003e\nFord F-150  2007\u003cbr\u003e\nFord F-150  2008\u003cbr\u003e\nFord F-150  2009\u003cbr\u003e\nFord F-150  2010\u003cbr\u003e\nFord F-150  2011\u003cbr\u003e\nFord F-150  2012\u003cbr\u003e\nFord F-150  2013\u003cbr\u003e\nFord F-150  2014\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-250  1980\u003cbr\u003e\nFord F-250  1981\u003cbr\u003e\nFord F-250  1982\u003cbr\u003e\nFord F-250  1983\u003cbr\u003e\nFord F-250  1984\u003cbr\u003e\nFord F-250  1985\u003cbr\u003e\nFord F-250  1986\u003cbr\u003e\nFord F-250  1987\u003cbr\u003e\nFord F-250  1988\u003cbr\u003e\nFord F-250  1989\u003cbr\u003e\nFord F-250  1990\u003cbr\u003e\nFord F-250  1991\u003cbr\u003e\nFord F-250  1992\u003cbr\u003e\nFord F-250  1993\u003cbr\u003e\nFord F-250  1994\u003cbr\u003e\nFord F-250  1995\u003cbr\u003e\nFord F-250  1996\u003cbr\u003e\nFord F-250  1997\u003cbr\u003e\nFord F-250 Super Duty  1999\u003cbr\u003e\nFord F-250 Super Duty  2000\u003cbr\u003e\nFord F-250 Super Duty  2001\u003cbr\u003e\nFord F-250 Super Duty  2002\u003cbr\u003e\nFord F-250 Super Duty  2003\u003cbr\u003e\nFord F-250 Super Duty  2004\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-250 Super Duty  2009\u003cbr\u003e\nFord F-250 Super Duty  2010\u003cbr\u003e\nFord F-250 Super Duty  2011\u003cbr\u003e\nFord F-250 Super Duty  2012\u003cbr\u003e\nFord F-250 Super Duty  2013\u003cbr\u003e\nFord F-250 Super Duty  2014\u003cbr\u003e\nFord F-250 Super Duty  2015\u003cbr\u003e\nFord F-250 Super Duty  2016\u003cbr\u003e\nFord F-350  1980\u003cbr\u003e\nFord F-350  1981\u003cbr\u003e\nFord F-350  1982\u003cbr\u003e\nFord F-350  1983\u003cbr\u003e\nFord F-350  1984\u003cbr\u003e\nFord F-350  1985\u003cbr\u003e\nFord F-350  1986\u003cbr\u003e\nFord F-350  1987\u003cbr\u003e\nFord F-350  1988\u003cbr\u003e\nFord F-350  1989\u003cbr\u003e\nFord F-350  1990\u003cbr\u003e\nFord F-350  1991\u003cbr\u003e\nFord F-350  1992\u003cbr\u003e\nFord F-350  1993\u003cbr\u003e\nFord F-350  1994\u003cbr\u003e\nFord F-350  1995\u003cbr\u003e\nFord F-350  1996\u003cbr\u003e\nFord F-350  1997\u003cbr\u003e\nFord F-350 Super Duty  1999\u003cbr\u003e\nFord F-350 Super Duty  2000\u003cbr\u003e\nFord F-350 Super Duty  2001\u003cbr\u003e\nFord F-350 Super Duty  2002\u003cbr\u003e\nFord F-350 Super Duty  2003\u003cbr\u003e\nFord F-350 Super Duty  2004\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2009\u003cbr\u003e\nFord F-350 Super Duty  2010\u003cbr\u003e\nFord F-350 Super Duty  2011\u003cbr\u003e\nFord F-350 Super Duty  2012\u003cbr\u003e\nFord F-350 Super Duty  2013\u003cbr\u003e\nFord F-350 Super Duty  2014\u003cbr\u003e\nFord F-350 Super Duty  2015\u003cbr\u003e\nFord F-350 Super Duty  2016\u003cbr\u003e\nFord Ranger  1983\u003cbr\u003e\nFord Ranger  1984\u003cbr\u003e\nFord Ranger  1985\u003cbr\u003e\nFord Ranger  1986\u003cbr\u003e\nFord Ranger  1987\u003cbr\u003e\nFord Ranger  1988\u003cbr\u003e\nFord Ranger  1989\u003cbr\u003e\nFord Ranger  1990\u003cbr\u003e\nFord Ranger  1991\u003cbr\u003e\nFord Ranger  1992\u003cbr\u003e\nFord Ranger  1993\u003cbr\u003e\nFord Ranger  1994\u003cbr\u003e\nFord Ranger  1995\u003cbr\u003e\nFord Ranger  1996\u003cbr\u003e\nFord Ranger  1997\u003cbr\u003e\nGMC Jimmy  1970\u003cbr\u003e\nGMC Jimmy  1971\u003cbr\u003e\nGMC Jimmy  1972\u003cbr\u003e\nGMC Jimmy  1973\u003cbr\u003e\nGMC Jimmy  1974\u003cbr\u003e\nGMC Jimmy  1975\u003cbr\u003e\nGMC Jimmy  1976\u003cbr\u003e\nGMC Jimmy  1977\u003cbr\u003e\nGMC Jimmy  1978\u003cbr\u003e\nGMC Jimmy  1979\u003cbr\u003e\nGMC Jimmy  1980\u003cbr\u003e\nGMC Jimmy  1981\u003cbr\u003e\nGMC Jimmy  1982\u003cbr\u003e\nGMC Jimmy  1983\u003cbr\u003e\nGMC Jimmy  1984\u003cbr\u003e\nGMC Jimmy  1985\u003cbr\u003e\nGMC Jimmy  1986\u003cbr\u003e\nGMC Jimmy  1987\u003cbr\u003e\nGMC Jimmy  1988\u003cbr\u003e\nGMC Jimmy  1989\u003cbr\u003e\nGMC Jimmy  1990\u003cbr\u003e\nGMC Jimmy  1991\u003cbr\u003e\nGMC K15 Suburban  1975\u003cbr\u003e\nGMC K15 Suburban  1976\u003cbr\u003e\nGMC K15 Suburban  1977\u003cbr\u003e\nGMC K15 Suburban  1978\u003cbr\u003e\nGMC K15\/K1500 Pickup  1967\u003cbr\u003e\nGMC K15\/K1500 Pickup  1968\u003cbr\u003e\nGMC K15\/K1500 Pickup  1969\u003cbr\u003e\nGMC K15\/K1500 Pickup  1970\u003cbr\u003e\nGMC K15\/K1500 Pickup  1971\u003cbr\u003e\nGMC K15\/K1500 Pickup  1972\u003cbr\u003e\nGMC K15\/K1500 Pickup  1973\u003cbr\u003e\nGMC K15\/K1500 Pickup  1974\u003cbr\u003e\nGMC K15\/K1500 Suburban  1968\u003cbr\u003e\nGMC K15\/K1500 Suburban  1969\u003cbr\u003e\nGMC K15\/K1500 Suburban  1970\u003cbr\u003e\nGMC K15\/K1500 Suburban  1971\u003cbr\u003e\nGMC K15\/K1500 Suburban  1972\u003cbr\u003e\nGMC K15\/K1500 Suburban  1973\u003cbr\u003e\nGMC K15\/K1500 Suburban  1974\u003cbr\u003e\nGMC K1500  1979\u003cbr\u003e\nGMC K1500  1980\u003cbr\u003e\nGMC K1500  1981\u003cbr\u003e\nGMC K1500  1982\u003cbr\u003e\nGMC K1500  1983\u003cbr\u003e\nGMC K1500  1984\u003cbr\u003e\nGMC K1500  1985\u003cbr\u003e\nGMC K1500  1986\u003cbr\u003e\nGMC K1500 Suburban  1979\u003cbr\u003e\nGMC K1500 Suburban  1980\u003cbr\u003e\nGMC K1500 Suburban  1981\u003cbr\u003e\nGMC K1500 Suburban  1982\u003cbr\u003e\nGMC K1500 Suburban  1983\u003cbr\u003e\nGMC K1500 Suburban  1984\u003cbr\u003e\nGMC K1500 Suburban  1985\u003cbr\u003e\nGMC K1500 Suburban  1986\u003cbr\u003e\nGMC K25  1975\u003cbr\u003e\nGMC K25  1976\u003cbr\u003e\nGMC K25  1977\u003cbr\u003e\nGMC K25  1978\u003cbr\u003e\nGMC K25 Suburban  1975\u003cbr\u003e\nGMC K25 Suburban  1976\u003cbr\u003e\nGMC K25 Suburban  1977\u003cbr\u003e\nGMC K25 Suburban  1978\u003cbr\u003e\nGMC K25\/K2500 Pickup  1967\u003cbr\u003e\nGMC K25\/K2500 Pickup  1968\u003cbr\u003e\nGMC K25\/K2500 Pickup  1969\u003cbr\u003e\nGMC K25\/K2500 Pickup  1970\u003cbr\u003e\nGMC K25\/K2500 Pickup  1971\u003cbr\u003e\nGMC K25\/K2500 Pickup  1972\u003cbr\u003e\nGMC K25\/K2500 Pickup  1973\u003cbr\u003e\nGMC K25\/K2500 Pickup  1974\u003cbr\u003e\nGMC K25\/K2500 Suburban  1968\u003cbr\u003e\nGMC K25\/K2500 Suburban  1969\u003cbr\u003e\nGMC K25\/K2500 Suburban  1970\u003cbr\u003e\nGMC K25\/K2500 Suburban  1971\u003cbr\u003e\nGMC K25\/K2500 Suburban  1972\u003cbr\u003e\nGMC K25\/K2500 Suburban  1973\u003cbr\u003e\nGMC K25\/K2500 Suburban  1974\u003cbr\u003e\nGMC K2500  1979\u003cbr\u003e\nGMC K2500  1980\u003cbr\u003e\nGMC K2500  1981\u003cbr\u003e\nGMC K2500  1982\u003cbr\u003e\nGMC K2500  1983\u003cbr\u003e\nGMC K2500  1984\u003cbr\u003e\nGMC K2500  1985\u003cbr\u003e\nGMC K2500  1986\u003cbr\u003e\nGMC K2500 Suburban  1979\u003cbr\u003e\nGMC K2500 Suburban  1980\u003cbr\u003e\nGMC K2500 Suburban  1981\u003cbr\u003e\nGMC K2500 Suburban  1982\u003cbr\u003e\nGMC K2500 Suburban  1983\u003cbr\u003e\nGMC K2500 Suburban  1984\u003cbr\u003e\nGMC K2500 Suburban  1985\u003cbr\u003e\nGMC K2500 Suburban  1986\u003cbr\u003e\nGMC K35  1977\u003cbr\u003e\nGMC K35  1978\u003cbr\u003e\nGMC K3500  1979\u003cbr\u003e\nGMC K3500  1980\u003cbr\u003e\nGMC K3500  1981\u003cbr\u003e\nGMC K3500  1982\u003cbr\u003e\nGMC K3500  1983\u003cbr\u003e\nGMC K3500  1984\u003cbr\u003e\nGMC K3500  1985\u003cbr\u003e\nGMC K3500  1986\u003cbr\u003e\nMazda B2300  1995\u003cbr\u003e\nMazda B2300  1996\u003cbr\u003e\nMazda B3000  1994\u003cbr\u003e\nMazda B3000  1995\u003cbr\u003e\nMazda B3000  1996\u003cbr\u003e\nMazda B4000  1994\u003cbr\u003e\nMazda B4000  1995\u003cbr\u003e\nMazda B4000  1996\u003cbr\u003e\nMazda B4000  1997\u003cbr\u003e\nToyota Land Cruiser  1967\u003cbr\u003e\nToyota Land Cruiser  1968\u003cbr\u003e\nToyota Land Cruiser  1969\u003cbr\u003e\nToyota Land Cruiser  1970\u003cbr\u003e\nToyota Land Cruiser  1971\u003cbr\u003e\nToyota Land Cruiser  1972\u003cbr\u003e\nToyota Land Cruiser  1973\u003cbr\u003e\nToyota Land Cruiser  1974\u003cbr\u003e\nToyota Land Cruiser  1975\u003cbr\u003e\nToyota Land Cruiser  1976\u003cbr\u003e\nToyota Land Cruiser  1977\u003cbr\u003e\nToyota Land Cruiser  1978\u003cbr\u003e\nToyota Land Cruiser  1979\u003cbr\u003e\nToyota Land Cruiser  1980\u003cbr\u003e\nToyota Land Cruiser  1981\u003cbr\u003e\nToyota Land Cruiser  1982\u003cbr\u003e\nToyota Land Cruiser  1983\u003cbr\u003e\nToyota Land Cruiser  1984\u003cbr\u003e\nToyota Pickup  1979\u003cbr\u003e\nToyota Pickup  1980\u003cbr\u003e\nToyota Pickup  1981\u003cbr\u003e\nToyota Pickup  1982\u003cbr\u003e\nToyota Pickup  1983","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771716698221,"sku":"M2060","price":176.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/M2060.jpg?v=1792227725"},{"product_id":"skyjacker-f2130kxm-3-inch-suspension-lift-kit-with-adx-m2-0-aluminum-monotube-shocks-for-2021-2025-ford-f-150","title":"Skyjacker F2130KXM 3-Inch Suspension Lift Kit with ADX M2.0 Aluminum Monotube Shocks for 2021-2025 Ford F-150","description":"3 in. Suspension Lift Kit With ADX M2.0 Aluminum Monotube Shocks.\n\u003cp\u003eUpgrade the stance, clearance, and suspension performance of your 2021-2025 Ford F-150 with the Skyjacker F2130KXM 3-inch suspension lift kit. Designed for drivers who want room for larger tires without sacrificing factory-style ride quality, this system combines replacement upper control arms, front strut spacers, a rear block and U-bolt kit, and ADX M2.0 Adventure Series aluminum monotube shocks. The complete package is engineered to provide a more level stance while maintaining dependable handling on and off the road.\u003cbr\u003eSkyjacker replacement upper control arms feature built-in caster and camber correction to help restore alignment geometry after lifting. Welded gusset plates reinforce the arms and bushing eyelets, while CNC-machined bushing eyelets and ball joint cups provide precise fitment. Steel-encased OEM-style rubber bushings support quiet, controlled operation, and greasable ball joints use a full-induction ball design with low-friction bearing technology for added strength and durability. The kit is compatible with the Ford electric power-assisted steering system and is designed to align with OEM factory specifications.\u003cbr\u003eThe front lift system retains the Ford OEM-tuned performance struts with a combination of preload and short upper strut mount spacers. The T6160 aluminum preload spacer adds ride height, while the one-piece top-mount metal spacer uses a tab-and-slot interlocking design for strength and accurate installation. Durable powder coating helps protect the spacers from corrosion. Together, the components help prevent upper control arm and strut binding while keeping CV axle angles within OEM tolerances. The rear block and U-bolt kit provides a more level appearance and includes high-grade mounting hardware.\u003cbr\u003eIncluded ADX M2.0 aluminum monotube rear shocks use a full-displaced valving system inspired by off-road racing technology. This design helps improve damping control as the suspension moves over changing terrain, supporting confident handling and a controlled ride. The Skyjacker F2130KXM kit fits 2021, 2022, 2023, 2024, and 2025 Ford F-150 models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3-inch suspension lift system for improved ground clearance and larger tire fitment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReplacement upper control arms with built-in caster and camber correction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWelded gusset plates and CNC-machined components for increased strength and precise fitment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOEM-style rubber bushings for quiet, controlled suspension operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGreasable ball joints with full-induction ball design and low-friction bearing technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront preload and upper strut mount spacers retain OEM Ford performance struts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eT6160 aluminum preload spacer with durable powder-coated metal strut spacer\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned to help prevent CV axle overextension and upper control arm binding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear block and U-bolt kit delivers a more level stance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eADX M2.0 aluminum monotube rear shocks with full-displaced valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with Ford electric power-assisted steering\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh-grade mounting hardware included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2021-2025 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Long Label: WARNING: Cancer – www.p65warnings.ca.gov\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer – www.p65warnings.ca.gov\u003cbr\u003e\nProp 65 Y\/N: N\u003cbr\u003e\nShocks Included: Yes\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nLift Type: Front - Coil Springs\u003cbr\u003e\nMaximum Lift: 3 in\u003cbr\u003e\nAaiaid Part Number: BHNGF2130KXM\u003cbr\u003e\nPart Number: F2130KXM\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771821621357,"sku":"F2130KXM","price":1202.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/F2130KXM.jpg?v=1792230924"},{"product_id":"fabtech-fts22351-4-inch-suspension-lift-kit-component-box-for-2021-2026-ford-f-150","title":"Fabtech FTS22351 4-Inch Suspension Lift Kit Component Box for 2021-2026 Ford F-150","description":"\u003cp\u003eThe Fabtech FTS22351 Lift Kit Suspension Component Box is designed for select 2021–2026 Ford F-150 applications requiring a 4-inch suspension lift. This component box is intended to support a complete Fabtech suspension lift system and may require additional parts for installation. Verify the complete kit configuration and vehicle compatibility before ordering.\u003cbr\u003eFabtech is recognized for advanced aftermarket suspension engineering, combining more than 20 years of development experience with modern design software, fabrication equipment, and rigorous testing. The company’s experienced engineers and fabricators create suspension components focused on dependable performance, proper fitment, and long-term durability for off-road and everyday driving applications. The Fabtech FTS22351 reflects this commitment to carefully engineered suspension system components.\u003cbr\u003eDesigned for use with 2021, 2022, 2023, 2024, 2025, and 2026 Ford F-150 models, this component box is a practical choice when completing or servicing a Fabtech 4-inch suspension lift system. Always follow the manufacturer’s installation instructions and confirm that all required supporting components are available before beginning installation. Professional installation is recommended to help ensure correct suspension geometry, alignment, and system performance.\u003cbr\u003eThis product carries a California Proposition 65 warning. WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov. The Fabtech FTS22351 part number helps simplify product identification when matching replacement or supplemental components to a compatible Fabtech suspension lift application.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS22351\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Suspension lift kit component box\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 4 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Supports a complete Fabtech suspension lift system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Note: Additional parts may be required for a complete set\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 4\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22351\u003cbr\u003e\nPart Number: FTS22351\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772169584749,"sku":"FTS22351","price":690.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/white_TRUCK_F150.jpg?v=1792236553"},{"product_id":"fabtech-dirt-logic-2-5-coilover-shock-absorber-fts22333-for-2021-2026-ford-f-150","title":"Fabtech Dirt Logic 2.5 Coilover Shock Absorber FTS22333 for 2021-2026 Ford F-150","description":"Dirt Logic 2.5 Coil Over Shock Absorber\n\u003cp\u003eUpgrade your truck’s off-road suspension with the Fabtech Dirt Logic 2.5 Coilover Shock Absorber, part number FTS22333. Developed from Fabtech’s desert racing experience, this high-performance coilover is engineered to deliver exceptional damping capacity for aggressive off-road driving while maintaining controlled handling across a variety of coilover applications. Its OEM shock stroke supports a vehicle-specific fit for the 2021 through 2026 Ford F-150.\u003cbr\u003eThe Dirt Logic 2.5 uses high-quality coil springs and performance-focused damping technology to help manage suspension movement over rough terrain, whoops, uneven trails, and demanding desert conditions. The coilover design combines spring and shock functionality into a single suspension assembly, providing a reliable upgrade for drivers seeking improved off-road capability and consistent suspension control. Fabtech’s Dirt Logic series is built for durable performance where factory suspension components may not provide the damping capacity required for more aggressive use.\u003cbr\u003eDesigned specifically for compatible Ford F-150 applications, the Fabtech FTS22333 is a direct, vehicle-focused suspension solution for off-road builds and performance truck upgrades. Verify vehicle configuration and application requirements before installation. Professional installation is recommended to ensure proper setup, preload adjustment, and suspension alignment. This product contains a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirt Logic 2.5 coilover shock absorber designed for high-performance off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech part number FTS22333 for vehicle-specific identification\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDeveloped from desert racing experience for aggressive off-road driving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh-quality coil springs help provide controlled suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOEM shock stroke supports fitment for compatible Ford F-150 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2021-2026 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nShock Stroke: OEM\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22333\u003cbr\u003e\nPart Number: FTS22333\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772175089773,"sku":"FTS22333","price":1993.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts22333-kit.jpg?v=1792236716"},{"product_id":"fabtech-ftl5207-1-5-inch-front-leveling-kit-for-2015-2024-ford-f-150","title":"Fabtech FTL5207 1.5-Inch Front Leveling Kit for 2015-2026 Ford F-150","description":"Leveling System\n\u003cp\u003eUpgrade the stance and front-end clearance of your truck with the Fabtech FTL5207 Suspension Front Leveling Kit. Designed for 2015 through 2024 Ford F-150 models, this 1.5-inch leveling solution helps reduce the factory nose-down appearance while providing a balanced look and additional room for appropriately sized tires. Fabtech is recognized for properly engineered suspension systems, and this kit is developed specifically for reliable fitment and performance on the listed applications.\u003cbr\u003eFabtech engineered and tested multiple leveling heights for each vehicle application. The FTL5207 represents the tallest height Fabtech determined could be used safely without causing ball joint, tie rod, or steering bind. Its heavy-duty construction is designed to withstand demanding driving conditions while maintaining dependable suspension geometry. Installation should be completed using appropriate tools and procedures, with an alignment recommended after installation to help ensure proper handling and tire wear.\u003cbr\u003eThis Fabtech leveling kit also includes the brand’s Free 5-Year\/60,000-Mile Powertrain Warranty, offering added confidence in the product and its application. Fabtech further supports its leveling products with an exclusive Trade Up program, allowing the original purchase amount to be applied later toward a new Fabtech Suspension System, subject to program terms. The FTL5207 is a practical choice for Ford F-150 owners seeking a professionally engineered front leveling upgrade without replacing the complete suspension system. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Fits 2015-2024 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: Provides a 1.5-inch front leveling lift\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Heavy-duty construction for dependable durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineering: Designed and tested to minimize ball joint, tie rod, and steering bind\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Includes Fabtech’s Free 5-Year\/60,000-Mile Powertrain Warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTrade Up Program: Eligible for Fabtech’s leveling kit Trade Up program, subject to program terms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 1.5\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTL5207\u003cbr\u003e\nPart Number: FTL5207\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772329295981,"sku":"FTL5207","price":164.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/ftl5207-beauty-life.jpg?v=1792239384"}],"url":"https:\/\/truckarmy.com\/collections\/suspension-for-2024-ford-f-150.oembed","provider":"Truck Army","version":"1.0","type":"link"}