{"title":"Suspension for 2024 Toyota 4Runner","description":null,"products":[{"product_id":"bilstein-b12-special-coil-spring-set-53-332837-for-toyota-4runner-fj-cruiser-and-lexus-gx460","title":"Bilstein B12 (Special) Coil Spring Set 53-332837 for Toyota 4Runner, FJ Cruiser and Lexus GX460","description":"B12 (Special) - Coil Spring Set\n\u003cp\u003eUpgrade your light truck or SUV suspension with the Bilstein B12 (Special) coil spring set, part number 53-332837. Designed to modify ride height for improved performance, this suspension kit delivers a balanced combination of suspension dynamics, quality, and refined appearance. It is engineered for drivers seeking dependable spring performance and a purposeful suspension upgrade for select Toyota and Lexus applications.\u003cbr\u003eThe kit includes a pair of black linear-rate coil springs, a pair of bump stop extension washers, and supporting components for installation. The front springs feature a 700 lb\/in spring rate to provide controlled support and consistent suspension response. Bilstein’s B12 (Special) design helps optimize ride height for specific vehicle requirements while maintaining the durability expected from a premium suspension component.\u003cbr\u003eThis Bilstein coil spring set fits select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications. Verify vehicle configuration and application details before ordering to ensure proper fitment. Professional installation is recommended, and alignment should be checked after suspension work. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 53-332837\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B12 (Special)\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Type: Coil spring set\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select Toyota FJ Cruiser, Toyota 4Runner, and Lexus GX460 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Finish: Black\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Spring Rate: 700 lb\/in\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Spring Type: Linear\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Pair of coil springs and pair of bump stop extension washers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Segment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFinish: Springs: Black\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nSeries: B12 (Special)\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 700\u003cbr\u003e\nFront Main Spring Type: Linear\u003cbr\u003e\nParttype: Coil Spring Set\u003cbr\u003e\nKit Contents: Pair of coil springs, pair of bump stop extension washers\u003cbr\u003e\nAaiaid Part Number: BBGL53-332837\u003cbr\u003e\nPart Number: 53-332837\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014\u003cbr\u003e\nToyota Tacoma  2016\u003cbr\u003e\nToyota Tacoma  2017\u003cbr\u003e\nToyota Tacoma  2018\u003cbr\u003e\nToyota Tacoma  2019\u003cbr\u003e\nToyota Tacoma  2020\u003cbr\u003e\nToyota Tacoma  2021\u003cbr\u003e\nToyota Tacoma  2022\u003cbr\u003e\nToyota Tacoma  2023","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771202044013,"sku":"53332837","price":258.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/53-332837_1.jpg?v=1792219355"},{"product_id":"bilstein-b8-6112-suspension-kit-47-310025-for-select-toyota-4runner-fj-cruiser-and-lexus-gx460","title":"Bilstein B8 6112 Suspension Kit 47-310025 for Select Toyota 4Runner, FJ Cruiser and Lexus GX460","description":"B8 6112 - Suspension Kit\n\u003cp\u003eUpgrade the suspension performance and ground clearance of your light truck or SUV with the Bilstein B8 6112 suspension kit, part number 47-310025. This direct-fit leveling system is engineered for select 2011–2014 Toyota 4Runner and FJ Cruiser models, along with select 2012–2014 Lexus GX460 applications. The kit combines vehicle-specific tuning with matched components to deliver improved control, increased wheel travel, and clearance for larger tires while maintaining confident on-road handling and off-road capability.\u003cbr\u003eThe Bilstein B8 6112 kit includes two 60mm monotube shock absorbers, two custom-matched cold-wound coil springs, and two billet aluminum spring seats. Its snap-ring grooved body provides adjustable spring seat positions and up to 2.75 inches of front lift, depending on the vehicle application. The large 2.65-inch outside-diameter body and 60mm digressive piston are designed to provide enhanced damping control across changing terrain and driving conditions.\u003cbr\u003eBuilt for demanding light-truck use, each damper features a zinc-plated finish, an 18mm shaft, and a non-reservoir monotube internal design. The included black coil springs feature a 600-pound-per-inch front main spring rate, while the included spring seats support a precise installation. The kit does not include shock boots and is designed without external reservoirs. With Bilstein engineering and application-specific calibration, the B8 6112 delivers a complete suspension solution for drivers seeking dependable lift, stronger support, and improved off-road response.\u003cbr\u003ePlease verify vehicle configuration and application before ordering. Compatible applications include select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 models. This product contains a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Suspension leveling kit for select Toyota 4Runner, Toyota FJ Cruiser, and Lexus GX460 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Range: Provides up to 2.75 inches of front lift depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Includes two 60mm shock absorbers, two matched coil springs, and two billet aluminum spring seats\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring grooved coilover body with adjustable spring seat positions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube dampers with a 60mm digressive piston for responsive damping control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Rate: Front main spring rate of 600 pounds per inch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Zinc-plated dampers, black coil springs, and 18mm shock shafts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 4.79 inches of shock stroke with 21.65-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Vehicle-specific tuning for select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nStroke\/Travel Length (In): 4.79\u003cbr\u003e\nExtended Length (In): 21.65\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 121.7\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 6112\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (In): 16.86\u003cbr\u003e\nCollapsed Length (Mm): 428.3\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 550.0\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL47-310025\u003cbr\u003e\nPart Number: 47-310025\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771205615725,"sku":"47310025","price":923.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/47-310025_7.jpg?v=1792219494"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-corner-module-41-326275-for-toyota-4runner-and-fj-cruiser","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module 41-326275 for Toyota 4Runner and FJ Cruiser","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module, part number 41-326275, is a direct-fit, 3-way adjustable coilover shock designed for select Toyota 4Runner and FJ Cruiser applications. Built for light trucks and SUVs, this front suspension module combines position-sensitive damping with user-adjustable compression control to deliver refined road manners and confident handling over demanding terrain. The smooth-body monotube design uses a 2.65-inch shock body and a 60 mm piston for consistent damping performance and improved heat management.\u003cbr\u003eBilstein ZoneControl CR technology uses three independent pistons to provide three compression zones and two rebound zones. Click adjusters allow precise adjustment of both high- and low-speed compression, while the internal hydraulic bump stop, or JCO, helps control harsh suspension inputs near full compression. The included remote reservoir supports additional cooling capacity during extended off-road use and includes a bolt-on anodized chassis mount for secure installation. The threaded spring seat provides ride-height adjustment from 0 to 3 inches, depending on the application, and the spring seat and front coil spring are included.\u003cbr\u003eDesigned for the front right corner, this Bilstein B8 8112 module features a 600 lb\/in front main spring rate, 22.24-inch extended length, and 17.43-inch collapsed length. It includes a special upper mount and 14.1 mm eye-style lower mount, with a 22 mm shaft and durable steel body. The EVO Grey damper and black spring finish provide a functional, professional appearance. This module is engineered for select 2011-2017 Toyota FJ Cruiser and 2012-2017 Toyota 4Runner models; verify vehicle configuration and side-specific fitment before ordering. California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 41-326275\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8112 ZoneControl CR DSA+\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front right corner module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Direct-fit, 3-way adjustable monotube coilover shock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Position-sensitive design with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustability: High- and low-speed compression click adjusters with internal hydraulic bump stop adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Remote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height: Threaded spring seat with 0 to 3 inches of adjustment, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring: Included 600 lb\/in front main spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody: 2.65-inch smooth steel body with 60 mm piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Special upper mount and 14.1 mm eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel Range: 17.43-inch collapsed length and 22.24-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Grey damper with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2011-2017 Toyota FJ Cruiser and 2012-2017 Toyota 4Runner models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-326275\u003cbr\u003e\nPart Number: 41-326275\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771223867501,"sku":"41326275","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326275_2.jpg?v=1792219652"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-corner-module-41-326251","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module 41-326251","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eUpgrade the front suspension of your light truck or SUV with the Bilstein B8 8112 ZoneControl CR DSA+ front right corner module, part number 41-326251. Designed as a direct-fit coilover shock assembly, this position-sensitive system combines controlled ride comfort for everyday driving with precise suspension control over demanding terrain. Its smooth-body monotube design uses a durable steel construction and a 2.65-inch shock body for consistent performance under varied loads and driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe ZoneControl CR system uses three independent pistons to provide three compression zones and two rebound zones. Dual Speed Adjustability allows separate tuning of low- and high-speed compression through convenient click adjusters, while the internal JCO adjustable hydraulic bump stop helps manage harsh suspension inputs. A remote reservoir improves cooling capacity during extended or aggressive use and includes a bolt-on anodized chassis mount for secure installation.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein B8 8112 coilover module includes a threaded spring seat for application-dependent ride-height adjustment of up to 3 inches, along with a 600-pound-per-inch front main spring. The special upper mount and 14.1-millimeter eye lower mount support a direct-fit installation on the specified application. The EVO Grey damper and black spring finish provide a clean, durable appearance, while the 60-millimeter piston and 22-millimeter shaft are engineered for dependable suspension response.\u003c\/p\u003e\n\u003cp\u003ePart number 41-326251 is intended for the front right corner and fits select 2012–2016 Lexus GX460 and 2012–2016 Toyota 4Runner models. Verify vehicle configuration and application details before ordering. Professional installation and alignment are recommended after suspension work.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit front right corner coilover module for select Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\n\u003cli\u003eBilstein B8 8112 ZoneControl CR DSA+ position-sensitive damping technology\u003c\/li\u003e\n\u003cli\u003eThree compression zones and two rebound zones controlled by independent pistons\u003c\/li\u003e\n\u003cli\u003eClick adjusters for separate low- and high-speed compression tuning\u003c\/li\u003e\n\u003cli\u003eAdjustable internal JCO hydraulic bump stop\u003c\/li\u003e\n\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\n\u003cli\u003eThreaded spring seat with application-dependent ride-height adjustment up to 3 inches\u003c\/li\u003e\n\u003cli\u003eSmooth-body monotube design with a 2.65-inch body and 60-millimeter piston\u003c\/li\u003e\n\u003cli\u003e600-pound-per-inch front main spring with black finish\u003c\/li\u003e\n\u003cli\u003eEVO Grey damper finish and durable steel body construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-326251\u003cbr\u003e\nPart Number: 41-326251\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771235860589,"sku":"41326251","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326251_1.jpg?v=1792219676"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-left-corner-module-41-326244","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Left Corner Module 41-326244","description":"B8 8112 (ZoneControl CR DSA+) - Front Left Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR DSA+ front left corner module, part number 41-326244, is a direct-fit adjustable coilover system engineered for light trucks and SUVs. This smooth-body monotube coilover combines position-sensitive damping with independent adjustment for low- and high-speed compression, allowing drivers to fine-tune suspension performance for daily driving, demanding trails, and changing terrain. The module includes a threaded spring seat for application-specific ride-height adjustment and a 600 lb\/in front main spring.\u003cbr\u003eZoneControl CR technology uses a triple-piston design with three compression zones and two rebound zones. This position-sensitive setup helps provide controlled, comfortable damping during normal suspension movement while delivering additional support during larger impacts. Click adjusters provide precise control over high- and low-speed compression, while the internal JCO hydraulic bump stop can be adjusted to help manage suspension travel near full compression. The included remote reservoir increases oil capacity and cooling performance, and the bolt-on anodized reservoir mount provides a secure installation solution.\u003cbr\u003eThis Bilstein B8 8112 module features an EVO Grey damper finish, black spring, steel body construction, a 60mm piston, and a 22mm shaft. It is designed with a special upper mount and an eye-style lower mount. The front left corner module is compatible with select 2012-2016 Lexus GX460 and Toyota 4Runner applications; verify vehicle fitment and suspension configuration before ordering. Professional installation is recommended, and alignment should be checked after installation or ride-height changes. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front left corner coilover module for select Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl CR position-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDual Speed Adjustability with click controls for high- and low-speed compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable internal JCO hydraulic bump stop for improved control near full compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount for increased cooling capacity\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat for application-specific ride-height adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with a 60mm piston and 22mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600 lb\/in front main spring with black finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish and steel body construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 ZoneControl CR DSA+ series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-326244\u003cbr\u003e\nPart Number: 41-326244\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771238973549,"sku":"41326244","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326244_10.jpg?v=1792219695"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-right-coilover-module-41-324165","title":"Bilstein B8 8112 ZoneControl CR Front Right Coilover Module 41-324165","description":"B8 8112 (ZoneControl CR) - Front Right Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR front right corner module, part number 41-324165, is a direct-fit position-sensitive coilover designed for select light trucks and SUVs, including the 2012–2016 Lexus GX460 and 2012–2016 Toyota 4Runner. This complete module combines a monotube steel damper, coil spring, threaded spring seat, and remote reservoir to deliver controlled handling and improved ride comfort across changing terrain and suspension loads. Its smooth-body coilover construction and special upper mount are engineered for dependable installation and performance.\u003cbr\u003eZoneControl CR technology uses a triple-piston design with three independent compression zones and two rebound zones. This position-sensitive damping system automatically adjusts control according to suspension position, helping provide comfortable everyday driving characteristics while maintaining control during larger suspension inputs. The remote reservoir increases fluid capacity and cooling performance, while the included bolt-on anodized reservoir mount supports secure chassis installation. Damping is non-adjustable, and the system does not include a protective boot.\u003cbr\u003eThe threaded spring seat allows ride-height adjustment from 0 to 3.8 inches, depending on the vehicle application. The module includes a 600-pound-per-inch front main spring, with optional heavy-load springs available under Bilstein part numbers 53-291387 and 53-332837. The damper features a 60 mm piston, 22 mm shaft, 14.1 mm eye-style lower mount, and EVO Grey damper finish with a black spring. Its extended length is 22.80 inches and its collapsed length is 17.99 inches. Professional installation and application verification are recommended before purchase. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit Bilstein B8 8112 ZoneControl CR front right corner module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design with three independent pistons\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir for increased cooling capacity and consistent performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat with application-dependent ride-height adjustment from 0 to 3.8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600-pound-per-inch front main spring included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube steel damper with 60 mm piston and 22 mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body coilover design with special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14.1 mm eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select 2012–2016 Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional heavy-load springs available: 53-291387 and 53-332837\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nFinish: Dampers: EVO Grey \/ Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 579.1\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nCollapsed Length (Mm): 456.9\u003cbr\u003e\nCollapsed Length (In): 17.99\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-324165\u003cbr\u003e\nPart Number: 41-324165\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771243495533,"sku":"41324165","price":1160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-324165_2.jpg?v=1792219712"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-left-coilover-module-part-41-324158","title":"Bilstein B8 8112 ZoneControl CR Front Left Coilover Module, Part 41-324158","description":"B8 8112 (ZoneControl CR) - Front Left Corner Module\n\u003cp\u003eUpgrade the front suspension of your light truck or SUV with the Bilstein B8 8112 ZoneControl CR front left corner module, part number 41-324158. Designed as a direct-fit coilover shock, this module combines position-sensitive damping with adjustable ride height and a remote reservoir for improved cooling during demanding driving conditions. It is engineered for select 2012–2016 Lexus GX460 and Toyota 4Runner applications.\u003cbr\u003eThe ZoneControl CR system uses a triple-piston design with three independent compression zones and two rebound zones. This progressive damping technology helps provide controlled response over large suspension inputs while maintaining ride comfort during everyday driving. The monotube internal design, steel smooth body, and 60 mm piston provide consistent performance across changing terrain and suspension movement.\u003cbr\u003eThis Bilstein B8 8112 coilover features a threaded spring seat with ride-height adjustability from 0 to 3.8 inches, depending on the application. The front main spring rate is 600 pounds per inch, and the module includes a spring seat and remote reservoir with a bolt-on anodized chassis mount. The damper is non-adjustable and finished in EVO Grey, while the included spring is black. The lower mount uses a 14.1 mm eyelet, and the special upper mount is designed for application-specific installation. Optional heavy-load springs 53-291387 and 53-332837 are available for select setups.\u003cbr\u003eCompatible applications include the 2012–2016 Lexus GX460 and 2012–2016 Toyota 4Runner, subject to vehicle configuration and suspension requirements. Verify application details before ordering. This product may expose you to chemicals identified by California Proposition 65 as causing cancer or reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 ZoneControl CR front left corner coilover module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 41-324158\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design for select Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design with three independent pistons\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir for increased cooling capacity\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat with 0–3.8-inch ride-height adjustability, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with a 60 mm piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600-pound-per-inch front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteel smooth-body coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes spring seat and bolt-on anodized reservoir chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14.1 mm eyelet lower mount and special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional heavy-load springs 53-291387 and 53-332837\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 579.1\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nCollapsed Length (In): 17.99\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey \/ Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 456.9\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-324158\u003cbr\u003e\nPart Number: 41-324158\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771245494381,"sku":"41324158","price":1160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-324158_2.jpg?v=1792219735"},{"product_id":"bilstein-b12-special-rear-coil-spring-set-36-281824-for-toyota-4runner-fj-cruiser-and-lexus-gx460","title":"Bilstein B12 (Special) Rear Coil Spring Set 36-281824 for Toyota 4Runner, FJ Cruiser and Lexus GX460","description":"B12 (Special) - Coil Spring Set\n\u003cp\u003eUpgrade your vehicle’s suspension with the Bilstein B12 (Special) coil spring set, part number 36-281824. Designed for select Toyota 4Runner, Toyota FJ Cruiser, and Lexus GX460 applications, this rear spring kit is engineered to help achieve a performance-focused ride height while maintaining dependable suspension control. Bilstein combines suspension expertise, quality construction, and application-specific design to support improved handling and a balanced appearance.\u003c\/p\u003e\n\u003cp\u003eThese black-finished rear coil springs feature a linear spring design and a main spring rate of 186 pounds per inch. The linear rate provides consistent resistance throughout suspension travel, helping deliver predictable vehicle behavior under changing road conditions. The kit includes a pair of coil springs for installation on the rear axle, making it a practical choice for replacing worn components or refreshing the suspension system with matched springs.\u003c\/p\u003e\n\u003cp\u003eBilstein B12 (Special) suspension components are developed for drivers seeking enhanced suspension dynamics without sacrificing everyday usability. The springs are intended for compatible light-truck applications and should be installed according to the vehicle manufacturer’s service procedures. Verify the year, make, model, and suspension configuration before ordering to ensure proper fitment. This set fits select 2011–2014 Toyota 4Runner, 2011–2014 Toyota FJ Cruiser, and 2012–2014 Lexus GX460 models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This product may expose you to chemicals, including substances identified by California Proposition 65 as causing cancer or reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\n\u003cli\u003eSeries: B12 (Special)\u003c\/li\u003e\n\u003cli\u003ePart Number: 36-281824\u003c\/li\u003e\n\u003cli\u003ePart Type: Rear coil spring set\u003c\/li\u003e\n\u003cli\u003eKit Contents: Pair of coil springs\u003c\/li\u003e\n\u003cli\u003eSpring Design: Linear\u003c\/li\u003e\n\u003cli\u003eRear Main Spring Rate: 186 pounds per inch\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eApplication: Select Toyota 4Runner, Toyota FJ Cruiser, and Lexus GX460 models\u003c\/li\u003e\n\u003cli\u003eFitment: Select 2011–2014 Toyota 4Runner and Toyota FJ Cruiser models, plus select 2012–2014 Lexus GX460 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 186\u003cbr\u003e\nParttype: Coil Spring Set\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nFinish: Springs: Black\u003cbr\u003e\nSeries: B12 (Special)\u003cbr\u003e\nRear Main Spring Type: Linear\u003cbr\u003e\nKit Contents: Pair of coil springs\u003cbr\u003e\nAaiaid Part Number: BBGL36-281824\u003cbr\u003e\nPart Number: 36-281824\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771263680621,"sku":"36281824","price":258.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/36-281824_1.jpg?v=1792219891"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-313146","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-313146","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck or SUV with the Bilstein B8 5100 suspension shock absorber, part number 33-313146. Designed as a direct-fit replacement for select Toyota FJ Cruiser, Toyota 4Runner, and Lexus GX460 applications, this Bilstein shock absorber is engineered to improve ride quality, handling, and comfort while maintaining consistent performance on changing road surfaces. Its application-specific tuning helps provide controlled suspension response for light-truck use.\u003cbr\u003eThe B8 5100 features a 46mm monotube design that delivers consistent, fade-resistant damping in demanding driving conditions. A velocity-sensitive, digressive piston responds quickly to road variations, helping the shock absorber maintain tire contact and suspension control over rough pavement, uneven terrain, and changing loads. The smooth-body construction and non-adjustable damping design provide dependable operation without requiring manual tuning.\u003cbr\u003eThis Bilstein shock absorber uses a zinc-plated finish for added durability and includes a black bellows boot to help protect the shaft from road debris. It is configured with an eye-style lower mount and stem-style upper mount for direct installation on compatible applications. The shock has a 14mm shaft, an approximately 14.91-inch collapsed length, an approximately 23.03-inch extended length, and 8.12 inches of suspension travel. It does not include a reservoir or spring seat. Fitment includes select 2011–2014 Toyota FJ Cruiser models, 2012–2014 Toyota 4Runner models, and 2012–2014 Lexus GX460 models. Verify vehicle configuration and suspension lift requirements before ordering. This product contains a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series suspension shock absorber for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 33-313146\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning helps improve ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish for durable corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style lower mount with stem-style upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApproximately 14.91-inch collapsed length and 23.03-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.12 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir or spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.3mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 14.91\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nCollapsed Length (Mm): 378.8\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nExtended Length (Mm): 585.0\u003cbr\u003e\nStroke\/Travel Length (In): 8.12\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 206.3\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 23.03\u003cbr\u003e\nAaiaid Part Number: BBGL33-313146\u003cbr\u003e\nPart Number: 33-313146\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771273543789,"sku":"33313146","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-313146_1.jpg?v=1792220080"},{"product_id":"bilstein-b8-8100-bypass-suspension-shock-absorber-25-326376","title":"Bilstein B8 8100 Bypass Suspension Shock Absorber 25-326376","description":"B8 8100 (Bypass) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your light truck or SUV suspension with the Bilstein B8 8100 Bypass shock absorber, part number 25-326376. Designed as a direct-fit replacement for select Toyota 4Runner and Lexus GX460 applications, this motorsports-inspired damper delivers position-sensitive performance, improved ride control, and dependable bottom-out resistance. Its dual-tube external bypass design provides independent adjustment for compression and rebound, allowing drivers to fine-tune damping behavior for changing terrain and driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Bilstein B8 8100 uses Incremental Flow bypass adjusters with click-adjuster knobs for precise, repeatable tuning. A bottom hose and remote reservoir exit port help maintain consistent compression control through the full suspension cycle, while the included bolt-on anodized aluminum chassis mount supports a straightforward reservoir installation. The EVO Grey finish provides a durable, professional appearance, and the bypass body design is engineered for suspension performance rather than coilover use.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein shock features double-adjustable compression and rebound damping, a monotube internal design, a 60mm piston, and an 18mm shaft. It uses a stem upper mount and 19.2mm eye lower mount, with an extended length of 24.09 inches and a collapsed length of 14.72 inches. The reservoir-equipped design is suitable for enthusiasts seeking greater control, comfort, and tuning flexibility on light-truck and SUV platforms. Verify vehicle configuration and suspension compatibility before installation.\u003c\/p\u003e\n\u003cp\u003eCompatible applications include select 2012–2016 Lexus GX460 models and 2012–2016 Toyota 4Runner models. This product does not include a boot or spring seat. Installation should be performed using appropriate tools and procedures, with all mounting hardware properly secured. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDual-tube external bypass design provides position-sensitive damping\u003c\/li\u003e\n\u003cli\u003eIndependent compression and rebound adjustment with click-adjuster knobs\u003c\/li\u003e\n\u003cli\u003eIncremental Flow bypass adjusters support precise suspension tuning\u003c\/li\u003e\n\u003cli\u003eRemote reservoir with bottom hose and reservoir exit port improves compression control\u003c\/li\u003e\n\u003cli\u003eBolt-on anodized aluminum chassis mount included for reservoir installation\u003c\/li\u003e\n\u003cli\u003eMonotube internal design with a 60mm piston and 18mm shaft\u003c\/li\u003e\n\u003cli\u003eBypass body design for light trucks and SUVs; not a coilover\u003c\/li\u003e\n\u003cli\u003eEVO Grey finish offers a durable, professional appearance\u003c\/li\u003e\n\u003cli\u003eStem upper mount and 19.2mm eye lower mount\u003c\/li\u003e\n\u003cli\u003eExtended length of 24.09 inches and collapsed length of 14.72 inches\u003c\/li\u003e\n\u003cli\u003eDirect-fit applications for select Lexus GX460 and Toyota 4Runner models from 2012 through 2016\u003c\/li\u003e\n\u003cli\u003eBoot and spring seat are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.2mm\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nSeries: B8 8100 (Bypass)\u003cbr\u003e\nCollapsed Length (Mm): 374.0\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Double Adjustable Compression and Rebound with Click Adjuster Knobs\u003cbr\u003e\nBody Design: Bypass Body (Non-Coilover)\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 612.0\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (In): 24.09\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nCollapsed Length (In): 14.72\u003cbr\u003e\nAaiaid Part Number: BBGL25-326376\u003cbr\u003e\nPart Number: 25-326376\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771387052141,"sku":"25326376","price":1282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-326376_1.jpg?v=1792221784"},{"product_id":"bilstein-b8-8100-bypass-suspension-shock-absorber-25-326369","title":"Bilstein B8 8100 Bypass Suspension Shock Absorber 25-326369","description":"B8 8100 (Bypass) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your light truck or SUV suspension with the Bilstein B8 8100 Bypass suspension shock absorber, part number 25-326369. Designed as a direct-fit damper, this motorsports-inspired shock uses a dual-tube external bypass design to provide position-sensitive damping throughout the suspension cycle. Independent compression and rebound adjustment allows drivers to fine-tune ride control for changing terrain, vehicle loads, and driving conditions. The EVO Grey finish delivers a durable, professional appearance suited to demanding off-road and performance applications.\u003cbr\u003eThe Bilstein B8 8100 features Incremental Flow bypass adjusters with click-adjuster knobs for precise, repeatable changes. Its bottom hose and remote reservoir exit port help increase compression control through the full range of suspension travel, while the included bolt-on anodized aluminum chassis mount supports a clean and secure reservoir installation. The bypass body is non-coilover, and the shock is configured with a stem upper mount and 19.2-millimeter eye lower mount for compatible applications.\u003cbr\u003eEngineered for improved ride comfort and bottom-out control, this Bilstein shock absorber combines a monotube internal design with double-adjustable compression and rebound damping. It is suitable for select Toyota 4Runner and Lexus GX460 applications from 2012 through 2016. Verify vehicle fitment and suspension configuration before ordering. The shock has a 14.72-inch collapsed length, a 24.09-inch extended length, an 18-millimeter shaft, and a 60-millimeter piston. Prop 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 25-326369\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8100 Bypass\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Light truck and SUV suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Dual-tube external bypass with position-sensitive damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping Adjustment: Double-adjustable compression and rebound with click-adjuster knobs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Non-coilover bypass body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Remote reservoir with bolt-on anodized aluminum chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 19.2-millimeter eye\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60 millimeters\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 18 millimeters\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 14.72 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 24.09 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Grey\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2012-2016 Toyota 4Runner and Lexus GX460 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.2mm\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nSeries: B8 8100 (Bypass)\u003cbr\u003e\nCollapsed Length (Mm): 374.0\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Double Adjustable Compression and Rebound with Click Adjuster Knobs\u003cbr\u003e\nBody Design: Bypass Body (Non-Coilover)\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 612.0\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (In): 24.09\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nCollapsed Length (In): 14.72\u003cbr\u003e\nAaiaid Part Number: BBGL25-326369\u003cbr\u003e\nPart Number: 25-326369\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771387281517,"sku":"25326369","price":1282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-326369_3.jpg?v=1792221813"},{"product_id":"bilstein-b8-5160-remote-reservoir-suspension-shock-absorber-25-325096","title":"Bilstein B8 5160 Remote Reservoir Suspension Shock Absorber 25-325096","description":"B8 5160 - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein B8 5160 remote reservoir suspension shock absorber, part number 25-325096, is engineered as a direct-fit upgrade for lifted trucks and SUVs. Its remote reservoir increases cooling capacity and available wheel travel, helping maintain consistent performance during demanding off-road driving. The shock is designed for select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications, providing vehicle-specific damping for improved control and durability.\u003cbr\u003eBuilt with a 46mm monotube design, the Bilstein B8 5160 delivers consistent, fade-resistant performance across changing terrain and operating conditions. Its velocity-sensitive digressive valving is tuned for the specific application, allowing the shock to respond quickly to surface changes while maintaining controlled handling. The smooth-body construction, zinc-plated finish, black bellows boot, and non-adjustable damping design provide dependable protection and long-term function without the complexity of a coilover system.\u003cbr\u003eInstallation features include a 360-degree swivel banjo hose fitting, upper stem mount, lower eye mount, and included billet reservoir clamp for a clean, low-profile setup where applicable. With 9 inches of stroke and a remote reservoir configuration, this Bilstein shock absorber helps increase suspension travel and off-road capability. It is a practical choice for drivers seeking enhanced suspension performance in harsh environments while retaining a direct-fit design. Professional installation is recommended to verify application compatibility and mounting requirements.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir increases cooling capacity and suspension wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive valving is tuned for the specific application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e9-inch stroke supports increased suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBillet reservoir clamp is included for a secure, low-profile installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e360-degree swivel banjo hose fitting simplifies hose positioning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper stem mount and lower 19.25mm eye mount support direct-fit installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction with zinc-plated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot helps protect the shock shaft from dirt and debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping is calibrated for dependable application-specific control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 23.50\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nStroke\/Travel Length (In): 9.00\u003cbr\u003e\nCollapsed Length (In): 14.50\u003cbr\u003e\nBillet Reservoir Clamp Included: Yes\u003cbr\u003e\nLower Mount Type: Eye 19.25mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5160\u003cbr\u003e\nCollapsed Length (Mm): 368.3\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nStroke\/Travel Length (Mm): 228.6\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 597.0\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL25-325096\u003cbr\u003e\nPart Number: 25-325096\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771387838573,"sku":"25325096","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-325096_2.jpg?v=1792221855"},{"product_id":"bilstein-b8-5160-remote-reservoir-shock-absorber-25-311211","title":"Bilstein B8 5160 Remote Reservoir Shock Absorber 25-311211","description":"B8 5160 - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein B8 5160 remote reservoir shock absorber, part number 25-311211, is engineered as a direct-fit suspension upgrade for lifted trucks and SUVs. Its remote reservoir increases cooling capacity and available wheel travel, helping optimize suspension performance during demanding off-road driving. Designed for light-truck applications, this shock absorber is compatible with select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 models.\u003cbr\u003eThe 46mm monotube design delivers consistent, fade-resistant performance by maintaining reliable damping control under changing conditions. Velocity-sensitive digressive valving is tuned for the specific application to provide responsive handling on the road and controlled suspension movement over uneven terrain. The non-adjustable damping configuration offers a straightforward installation without requiring manual tuning.\u003cbr\u003eA 360-degree swivel banjo hose fitting helps simplify hose positioning and supports a clean, low-profile installation. The included billet reservoir clamp securely mounts the remote reservoir, while the zinc-plated smooth body provides durable protection for demanding environments. A black bellows boot helps protect the shock shaft from dirt and debris, and the eye lower mount with stem upper mount supports the intended vehicle-specific fitment.\u003cbr\u003eThis Bilstein B8 5160 shock absorber features a 14mm shaft, 9.00 inches of suspension travel, a 14.50-inch collapsed length, and a 23.50-inch extended length. It includes a remote reservoir and is designed without a spring seat for non-coilover applications. Professional installation is recommended, and fitment should be verified against the vehicle’s suspension configuration before ordering. Prop 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir increases cooling capacity and wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive valving is application-specific\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBillet reservoir clamp included for secure mounting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e360-degree swivel banjo hose fitting supports flexible installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated smooth body enhances durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot helps protect the shaft from debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping for simple, dependable operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye lower mount and stem upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e9.00 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14.50-inch collapsed length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e23.50-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nBillet Reservoir Clamp Included: Yes\u003cbr\u003e\nLower Mount Type: Eye 19.25mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5160\u003cbr\u003e\nCollapsed Length (Mm): 368.3\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nStroke\/Travel Length (Mm): 228.6\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nCollapsed Length (In): 14.50\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (Mm): 597.0\u003cbr\u003e\nExtended Length (In): 23.50\u003cbr\u003e\nStroke\/Travel Length (In): 9.00\u003cbr\u003e\nAaiaid Part Number: BBGL25-311211\u003cbr\u003e\nPart Number: 25-311211\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771397242989,"sku":"25311211","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-311211_1.jpg?v=1792222277"},{"product_id":"bilstein-b8-8100-dsa-reservoir-shock-absorber-25-294101-for-toyota-4runner-and-lexus-gx460","title":"Bilstein B8 8100 DSA Reservoir Shock Absorber 25-294101 for Toyota 4Runner and Lexus GX460","description":"B8 8100 (DSA) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your lifted truck or SUV with the Bilstein B8 8100 DSA reservoir shock absorber, part number 25-294101. Designed for select 2012–2016 Toyota 4Runner and Lexus GX460 applications, this direct-fit shock delivers durable, adjustable performance for demanding street, trail, and off-road driving. Its monotube construction and EVO Grey finish provide consistent operation and long-lasting durability.\u003c\/p\u003e\n\u003cp\u003eThe large-bore 60 mm shock body and 60 mm piston increase oil capacity to help manage heat during extended drives over rough terrain. Bilstein’s velocity-sensitive digressive valving is specifically tuned for each application, providing responsive handling, improved ride comfort, and reliable control without sacrificing performance. The remote or piggyback reservoir design supports efficient installation while helping maintain performance under demanding conditions.\u003c\/p\u003e\n\u003cp\u003eDual Speed Adjustment allows independent tuning of low- and high-speed compression through convenient click adjuster knobs. This gives drivers the flexibility to tailor damping characteristics to changing road surfaces, vehicle loads, and driving preferences. The smooth-body, non-coilover design includes a spring seat and uses an 18 mm shaft with an eye-style lower mount and stem-style upper mount. Boot is not included. A Prop 65 warning applies: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\n\u003cp\u003eCompatible applications include select Toyota 4Runner and Lexus GX460 models from 2012 through 2016. Verify vehicle fitment and suspension configuration before ordering. Bilstein B8 8100 DSA shocks are engineered for drivers seeking increased adjustability, comfort, and fade-resistant control from a premium suspension upgrade.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e60 mm large-bore digressive piston provides increased tuning range, comfort, and control\u003c\/li\u003e\n\u003cli\u003eDual Speed Adjustment with click adjuster knobs for independent low- and high-speed compression tuning\u003c\/li\u003e\n\u003cli\u003eMonotube design delivers consistent, fade-resistant performance\u003c\/li\u003e\n\u003cli\u003eReservoir design increases oil capacity and helps manage operating heat\u003c\/li\u003e\n\u003cli\u003eApplication-specific velocity-sensitive digressive valving improves ride quality and handling\u003c\/li\u003e\n\u003cli\u003eDirect-fit design supports installation on select lifted Toyota 4Runner and Lexus GX460 models\u003c\/li\u003e\n\u003cli\u003eSmooth-body, non-coilover construction with durable EVO Grey finish\u003c\/li\u003e\n\u003cli\u003e18 mm shaft with eye-style lower mount and stem-style upper mount\u003c\/li\u003e\n\u003cli\u003eSpring seat included; boot not included\u003c\/li\u003e\n\u003cli\u003eFits select 2012–2016 Toyota 4Runner and Lexus GX460 applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.1mm\u003cbr\u003e\nSeries: B8 8100 (DSA)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 596.5\u003cbr\u003e\nExtended Length (In): 23.48\u003cbr\u003e\nCollapsed Length (In): 14.94\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nCollapsed Length (Mm): 379.5\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nAdjustable Damping: Double Adjustable Compression with Click Adjuster Knobs\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL25-294101\u003cbr\u003e\nPart Number: 25-294101\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771399110765,"sku":"25294101","price":835.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-294101_1.jpg?v=1792222350"},{"product_id":"bilstein-b8-8100-reservoir-suspension-shock-absorber-25-294095","title":"Bilstein B8 8100 Reservoir Suspension Shock Absorber 25-294095","description":"B8 8100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade your lifted truck or SUV with the Bilstein B8 8100 reservoir suspension shock absorber, part number 25-294095. Designed as a direct-fit solution for select Toyota 4Runner and Lexus GX460 applications, this shock absorber delivers confident control on rough roads, trails, and extended drives. Its large-bore body increases oil volume to help manage operating temperatures, while the remote or piggyback reservoir configuration supports reliable performance and installation flexibility.\u003cbr\u003eThe Bilstein B8 8100 uses a monotube design with a 60mm digressive piston engineered for a broad range of tuning. Velocity-sensitive valving responds progressively to changing road conditions, helping provide a controlled, comfortable ride without sacrificing handling. The non-adjustable damping setup is calibrated for the intended application, making this shock absorber a practical choice for drivers seeking improved suspension control without manual adjustments.\u003cbr\u003eBuilt with aerospace-quality billet components, the Bilstein B8 8100 features an EVO Grey finish, an 18mm shaft, and a 19.2mm eye-style lower mount with a stem-style upper mount. The smooth-body, non-coilover design includes a reservoir but does not include a boot or spring seat. This suspension shock absorber is intended for the light-truck segment and is engineered to withstand demanding driving conditions while maintaining consistent, fade-resistant performance.\u003cbr\u003eFitment includes select 2012-2016 Lexus GX460 models and 2012-2016 Toyota 4Runner models. Verify the vehicle’s suspension configuration and application details before ordering to ensure proper compatibility. Bilstein part number 25-294095 is sold as an individual suspension shock absorber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 8100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Monotube shock absorber with reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: 60mm digressive piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody: 60mm internal diameter smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable, velocity-sensitive valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 19.2mm eye\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft: 18mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Grey\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2012-2016 Lexus GX460 and Toyota 4Runner models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.2mm\u003cbr\u003e\nSeries: B8 8100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nBody Design: 60mm ID Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (Mm): 596.5\u003cbr\u003e\nExtended Length (In): 23.48\u003cbr\u003e\nCollapsed Length (In): 14.94\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nCollapsed Length (Mm): 379.5\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL25-294095\u003cbr\u003e\nPart Number: 25-294095\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771399209069,"sku":"25294095","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-294095_2.jpg?v=1792222370"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-328258","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-328258","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck or SUV suspension with the Bilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-328258. Designed for vehicles equipped with a front OE coilover-style suspension, this shock absorber provides a practical way to improve handling, increase wheel travel, and achieve a more level stance. Its snap-ring grooved body allows the spring seat to be positioned at multiple settings, supporting up to 3 inches of front lift with original equipment springs when permitted by the application.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design with a digressive piston and self-adjusting deflective disc valve. This construction delivers consistent damping, fade-free performance, and responsive control across changing road and trail conditions. The shock features non-adjustable damping, a zinc-plated finish, a stem-style upper mount, and an eye-style lower mount. A spring seat is included, along with a black straight protective boot.\u003cbr\u003eThis light-truck suspension shock absorber is engineered for direct application-specific installation and does not include a remote reservoir. The Bilstein B8 5100 series is a dependable choice for drivers seeking improved ride control and front-end leveling without replacing the complete suspension system. Compatible applications include select 2011-2014 Toyota FJ Cruiser models, 2012-2014 Toyota 4Runner models, and 2012-2014 Lexus GX460 models. Verify vehicle configuration and suspension requirements before installation. This product contains a California Proposition 65 warning regarding cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design delivers consistent, fade-resistant damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide height adjustable snap-ring grooved body supports application-dependent front lift with OE springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDigressive piston with self-adjusting deflective disc valve improves handling and wheel control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping is calibrated for dependable light-truck suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish helps provide durable corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoilover-style body includes a spring seat for ride-height adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStem-style upper mount and eye-style lower mount support application-specific installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack straight protective boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select Toyota FJ Cruiser, Toyota 4Runner, and Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 566.8\u003cbr\u003e\nLower Mount Type: Eye 14.2mm\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 444.6\u003cbr\u003e\nStroke\/Travel Length (Mm): 122.2\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nExtended Length (In): 22.31\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.50\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 4.81\u003cbr\u003e\nBoot Included: Black Straight\u003cbr\u003e\nAaiaid Part Number: BBGL24-328258\u003cbr\u003e\nPart Number: 24-328258\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771459797101,"sku":"24328258","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-328258_2.jpg?v=1792222889"},{"product_id":"fabtech-dirt-logic-2-25-resi-front-shock-fts801392-for-2012-2021-toyota-4runner","title":"Fabtech Dirt Logic 2.25 Resi Front Shock FTS801392 for 2010-2024 Toyota 4Runner","description":"\u003cp\u003eUpgrade the front suspension of your 2012-2021 Toyota 4Runner with the Fabtech Dirt Logic 2.25 Resi Front Shock, part number FTS801392. Designed for demanding off-road use, this high-performance shock absorber helps deliver improved control, consistent damping, and enhanced ride quality across rough terrain. Its remote-reservoir design supports sustained performance during extended trail driving and high-impact suspension activity.\u003c\/p\u003e\n\u003cp\u003eThe Dirt Logic 2.25 series is engineered for strength and longevity, making it a dependable choice for drivers who require more from their suspension system. The robust construction is suited to off-road applications while maintaining compatibility with the vehicle’s factory mounting locations when used as specified by Fabtech. This front shock is a practical upgrade for improving suspension response, wheel control, and overall trail capability.\u003c\/p\u003e\n\u003cp\u003eFabtech FTS801392 is intended for the front of the vehicle and fits Toyota 4Runner models from 2012 through 2021. The shock has a 15.02-inch collapsed length, a 23.68-inch extended length, and an 8.66-inch stroke. Professional installation is recommended, and suspension components should be inspected regularly to ensure proper fitment and performance. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\n\u003cli\u003ePart Number: FTS801392\u003c\/li\u003e\n\u003cli\u003eApplication: Front suspension shock absorber\u003c\/li\u003e\n\u003cli\u003eSeries: Dirt Logic 2.25 Resi\u003c\/li\u003e\n\u003cli\u003eVehicle Fitment: 2012-2021 Toyota 4Runner\u003c\/li\u003e\n\u003cli\u003eCollapsed Length: 15.02 inches\u003c\/li\u003e\n\u003cli\u003eExtended Length: 23.68 inches\u003c\/li\u003e\n\u003cli\u003eShock Stroke: 8.66 inches\u003c\/li\u003e\n\u003cli\u003ePerformance: Designed for improved off-road control, durability, and suspension response\u003c\/li\u003e\n\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 15.02\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 23.68 in\u003cbr\u003e\nShock Stroke: 8.66 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS801392\u003cbr\u003e\nPart Number: FTS801392\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771864678509,"sku":"FTS801392","price":450.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/dirt-logic-225-resi-stainless_bb2be674-a076-49ae-a20b-bd3d9aec68be.jpg?v=1792231463"},{"product_id":"fabtech-fts7237-performance-shock-absorber-for-ram-2500-ram-3500-and-toyota-4runner","title":"Fabtech FTS7237 Performance Shock Absorber for Ram 2500, Ram 3500 and Toyota 4Runner","description":"\u003cp\u003eThe Fabtech FTS7237 Performance Shock Absorber is engineered to work with Fabtech suspension and lift systems, delivering controlled handling and dependable ride quality for trucks and SUVs. Its high-velocity 9-stage valving provides consistent damping across changing road conditions, helping improve suspension control during daily driving, towing, off-road travel, and high-speed use. A closed-cell insert helps reduce shock fade when the suspension is working hard.\u003cbr\u003eThe FTS7237 features a 10.66-inch shock stroke, with a collapsed length of 15.39 inches and an extended length of 26.05 inches. This performance shock is designed to complement the geometry and demands of compatible Fabtech lift kits, making it a practical replacement or upgrade for suspension systems that require reliable damping performance. The carefully tuned valving helps manage suspension movement while supporting a more stable and predictable ride.\u003cbr\u003eThis Fabtech shock absorber is compatible with select 2012 and newer Ram 2500, Ram 3500, and Toyota 4Runner applications. Verify your vehicle configuration, suspension setup, and lift-kit requirements before ordering to ensure proper fitment. Part number FTS7237 identifies this Fabtech Performance Shock for replacement and installation reference. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS7237\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Designed to work with Fabtech lift kits and suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving: High-velocity 9-stage valving for controlled damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Design: Closed-cell insert helps reduce shock fade at high speeds\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 10.66 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 15.39 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 26.05 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select 2012-2017 Ram 2500, Ram 3500, and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 15.39\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 26.05 in\u003cbr\u003e\nShock Stroke: 10.66 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS7237\u003cbr\u003e\nPart Number: FTS7237\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nDodge Ram 1500  1994\u003cbr\u003e\nDodge Ram 1500  1995\u003cbr\u003e\nDodge Ram 1500  1996\u003cbr\u003e\nDodge Ram 1500  1997\u003cbr\u003e\nDodge Ram 1500  1998\u003cbr\u003e\nDodge Ram 1500  1999\u003cbr\u003e\nDodge Ram 1500  2000\u003cbr\u003e\nDodge Ram 1500  2001\u003cbr\u003e\nDodge Ram 2500  1994\u003cbr\u003e\nDodge Ram 2500  1995\u003cbr\u003e\nDodge Ram 2500  1996\u003cbr\u003e\nDodge Ram 2500  1997\u003cbr\u003e\nDodge Ram 2500  1998\u003cbr\u003e\nDodge Ram 2500  1999\u003cbr\u003e\nDodge Ram 2500  2000\u003cbr\u003e\nDodge Ram 2500  2001\u003cbr\u003e\nDodge Ram 2500  2002\u003cbr\u003e\nDodge Ram 2500  2003\u003cbr\u003e\nDodge Ram 2500  2004\u003cbr\u003e\nDodge Ram 2500  2005\u003cbr\u003e\nDodge Ram 2500  2006\u003cbr\u003e\nDodge Ram 2500  2007\u003cbr\u003e\nDodge Ram 2500  2008\u003cbr\u003e\nDodge Ram 2500  2009\u003cbr\u003e\nDodge Ram 2500  2010\u003cbr\u003e\nDodge Ram 3500  1994\u003cbr\u003e\nDodge Ram 3500  1995\u003cbr\u003e\nDodge Ram 3500  1996\u003cbr\u003e\nDodge Ram 3500  1997\u003cbr\u003e\nDodge Ram 3500  1998\u003cbr\u003e\nDodge Ram 3500  1999\u003cbr\u003e\nDodge Ram 3500  2000\u003cbr\u003e\nDodge Ram 3500  2001\u003cbr\u003e\nDodge Ram 3500  2002\u003cbr\u003e\nDodge Ram 3500  2003\u003cbr\u003e\nDodge Ram 3500  2004\u003cbr\u003e\nDodge Ram 3500  2005\u003cbr\u003e\nDodge Ram 3500  2006\u003cbr\u003e\nDodge Ram 3500  2007\u003cbr\u003e\nDodge Ram 3500  2008\u003cbr\u003e\nDodge Ram 3500  2009\u003cbr\u003e\nDodge Ram 3500  2010\u003cbr\u003e\nRam 2500  2011\u003cbr\u003e\nRam 2500  2012\u003cbr\u003e\nRam 2500  2013\u003cbr\u003e\nRam 3500  2011\u003cbr\u003e\nRam 3500  2012\u003cbr\u003e\nRam 3500  2013\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771923791981,"sku":"FTS7237","price":58.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS7237-beauty.jpg?v=1792232218"},{"product_id":"fabtech-dirt-logic-2-5-resi-coilover-shock-absorber-fts26099-for-2012-2021-toyota-4runner","title":"Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber FTS26099 for 2010-2024 Toyota 4Runner","description":"Dirt Logic 2.5 Resi Coil Over Shock Absorber\n\u003cp\u003eUpgrade your Toyota 4Runner’s off-road suspension with the Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber, part number FTS26099. Developed from Fabtech’s desert racing experience, this performance-focused coilover is engineered for aggressive off-road driving and demanding trail conditions. Its reservoir design helps provide increased damping capacity, supporting consistent suspension performance when navigating rough terrain, whoops, rocks, and high-speed desert sections.\u003cbr\u003eThe Dirt Logic 2.5 is designed for a variety of coilover applications and combines robust construction with carefully tuned damping characteristics. It helps improve vehicle control, suspension response, and ride stability compared with standard shock absorbers. The included high-quality coil spring is built to complement the shock assembly, delivering dependable support for drivers seeking enhanced performance from their 4Runner suspension system.\u003cbr\u003eThis Fabtech coilover shock absorber fits 2012 through 2021 Toyota 4Runner models. It is intended for off-road enthusiasts who require durable suspension components for trail use, recreational driving, and performance-oriented applications. Verify vehicle configuration and installation requirements before ordering to ensure proper compatibility. Professional installation is recommended for suspension components. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26099\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Coilover shock absorber for off-road suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Dirt Logic 2.5 Resi\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: High damping capacity for aggressive off-road driving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Reservoir-equipped shock absorber developed from desert racing applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring: Includes a high-quality coil spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2012-2021 Toyota 4Runner\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26099\u003cbr\u003e\nPart Number: FTS26099\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772092121197,"sku":"FTS26099","price":2152.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/dirt-logic-25-resi-shock_TOY.png?v=1792234600"},{"product_id":"fabtech-fts26093-3-inch-lift-suspension-component-box-for-2015-2024-toyota-4runner","title":"Fabtech FTS26093 3-Inch Lift Suspension Component Box for 2015-2024 Toyota 4Runner","description":"\u003cp\u003eUpgrade your off-road suspension project with the Fabtech FTS26093 Lift Kit Suspension Component Box. Designed for select 2015–2024 Toyota 4Runner models, this component box supports a 3-inch lift application and is intended for use with the other parts required to complete the suspension system. Verify vehicle compatibility and complete kit requirements before installation.\u003cbr\u003eFabtech brings more than 20 years of aftermarket suspension development experience to every product. The company combines advanced design software, modern fabrication equipment, experienced engineers, and skilled fabricators to create suspension components focused on dependable performance and precise fitment. Extensive research, design validation, and rigorous testing help ensure that Fabtech products meet the demands of off-road enthusiasts.\u003cbr\u003eThe Fabtech FTS26093 is engineered for customers seeking a properly developed suspension solution for their Toyota 4Runner. Its component-box configuration makes it a practical choice when assembling or completing a Fabtech lift system. This product is designed for off-road suspension applications and should be installed according to the manufacturer’s instructions by a qualified technician. Professional installation is recommended to help maintain correct suspension geometry, handling, and vehicle safety.\u003cbr\u003eCompatible applications include the 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Toyota 4Runner. This product contains a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26093\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Lift kit suspension component box\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2015-2024 Toyota 4Runner\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Other parts are required for a complete suspension set\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Off-road suspension upgrade\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 3\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26093\u003cbr\u003e\nPart Number: FTS26093\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772094840941,"sku":"FTS26093","price":1202.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/COMPONENT_20BOX_201_20_282016-UP_29.jpg?v=1792234632"},{"product_id":"fabtech-dirt-logic-2-5-resi-coilover-fts26090-for-2012-2021-toyota-4runner","title":"Fabtech Dirt Logic 2.5 Resi Coilover FTS26090 for 2010-2024 Toyota 4Runner","description":"\u003cp\u003eUpgrade your 2012-2021 Toyota 4Runner with the Fabtech Dirt Logic 2.5 Resi Coilover, part number FTS26090. Designed for drivers who demand improved suspension performance on and off the road, this coilover delivers controlled damping, dependable durability, and a more capable ride for demanding trail use. Its performance-focused design helps provide consistent suspension action across changing terrain while maintaining excellent ride quality during everyday driving.\u003c\/p\u003e\n\u003cp\u003eThe Fabtech Dirt Logic 2.5 Resi Coilover features a stainless steel body engineered for strong corrosion resistance and long-term durability. A NitroSteel® piston rod further enhances protection against wear and environmental exposure, helping the assembly perform reliably in harsh conditions. The remote reservoir design supports increased damping capacity and improved heat management during extended off-road driving, making it well suited for recreational trail use and demanding suspension applications.\u003c\/p\u003e\n\u003cp\u003eBuilt for superior off-road damping, this Fabtech coilover helps the suspension respond effectively to uneven surfaces, impacts, and changing terrain. It is engineered as a performance replacement for compatible factory suspension components and is designed to work with the vehicle’s suspension system when installed according to Fabtech requirements. Confirm vehicle configuration and application details before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003cp\u003eThe Fabtech Dirt Logic 2.5 Resi Coilover FTS26090 fits 2012 through 2021 Toyota 4Runner models. Professional installation is recommended, along with a complete inspection of related suspension components and alignment after installation. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\n\u003cli\u003ePart Number: FTS26090\u003c\/li\u003e\n\u003cli\u003eApplication: Fits 2012-2021 Toyota 4Runner\u003c\/li\u003e\n\u003cli\u003eProduct Type: Dirt Logic 2.5 reservoir coilover\u003c\/li\u003e\n\u003cli\u003eConstruction: Stainless steel body for enhanced corrosion resistance and durability\u003c\/li\u003e\n\u003cli\u003ePiston Rod: NitroSteel® piston rod helps resist wear and corrosion\u003c\/li\u003e\n\u003cli\u003ePerformance: Provides excellent damping for off-road driving\u003c\/li\u003e\n\u003cli\u003eRide Quality: Designed for superior ride quality on and off the road\u003c\/li\u003e\n\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26090\u003cbr\u003e\nPart Number: FTS26090\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772095103085,"sku":"FTS26090","price":2072.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/Dirt_20Logic_202.5_20Resi_20Coilover_20-beauty.jpg?v=1792234666"},{"product_id":"fabtech-fts26085-coil-spring-kit-for-2012-2021-toyota-4runner","title":"Fabtech FTS26085 Coil Spring Kit for 2010-2024 Toyota 4Runner","description":"\u003cp\u003eUpgrade the suspension performance of your Toyota 4Runner with the Fabtech FTS26085 Coil Spring Kit. Designed for off-road enthusiasts and performance-focused drivers, this black coil spring set is engineered to provide dependable functionality and consistent suspension performance on demanding terrain. Fabtech combines more than 20 years of aftermarket suspension development with advanced design software, fabrication equipment, and experienced engineers and fabricators to create products built for real-world use.\u003cbr\u003eFabtech places a strong emphasis on proper suspension design, rigorous testing, and long-term reliability. The FTS26085 coil spring kit is developed to support a quality suspension system that performs consistently without unnecessary complications. Its durable construction and application-specific design make it a practical choice for replacing worn components or enhancing the suspension setup on compatible Toyota 4Runner models.\u003cbr\u003eThe Fabtech FTS26085 Coil Spring Kit fits 2012 through 2021 Toyota 4Runner applications. Its black finish provides a clean, professional appearance while complementing a wide range of suspension configurations. Fabtech products are recognized for their innovative engineering and dependable performance, making this coil spring set a suitable upgrade for drivers who expect strength, function, and off-road capability from their suspension components. Professional installation is recommended to help ensure correct fitment and performance. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26085\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Coil spring kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Black\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2012-2021 Toyota 4Runner\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Designed for dependable suspension function and off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineering: Developed using advanced suspension design technology and rigorous testing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nColor: Black\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26085\u003cbr\u003e\nPart Number: FTS26085\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772095168621,"sku":"FTS26085","price":231.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/REAR_COILS.jpg?v=1792234676"},{"product_id":"fabtech-fts26081-6-inch-suspension-lift-kit-component-box-for-2012-2021-toyota-4runner","title":"Fabtech FTS26081 6-Inch Suspension Lift Kit Component Box for 2010-2024 Toyota 4Runner","description":"\u003cp\u003eUpgrade your off-road suspension project with the Fabtech FTS26081 Suspension Lift Kit Component Box, designed for select 2012–2021 Toyota 4Runner models. This component box is intended for use with a complete Fabtech suspension system and provides the components needed to support a 6-inch lift application. Additional parts may be required to complete the installation, so verify the full kit contents and vehicle configuration before ordering.\u003cbr\u003eFabtech brings more than 20 years of aftermarket suspension engineering experience to every product. The company combines advanced design software, modern fabrication equipment, experienced engineers, and skilled fabricators to develop suspension components that meet demanding off-road requirements. Extensive research, design validation, and rigorous testing help ensure dependable performance and consistent fitment for enthusiasts who expect quality from their suspension system.\u003cbr\u003eThe Fabtech FTS26081 is engineered for drivers seeking increased ground clearance and enhanced suspension capability on compatible Toyota 4Runner applications. Professional installation is recommended to help ensure proper alignment, suspension geometry, and safe operation after installation. Always confirm vehicle year, model, existing suspension components, and complete-set requirements before beginning the project. This product contains a California Proposition 65 warning: Cancer and Reproductive Harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26081\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Suspension lift kit component box\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 6 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2012-2021 Toyota 4Runner\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Note: Additional parts may be required for a complete suspension system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineering: Developed using advanced suspension design, fabrication, research, and testing processes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 6\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26081\u003cbr\u003e\nPart Number: FTS26081\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772095299693,"sku":"FTS26081","price":881.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/desert.jpg?v=1792234692"},{"product_id":"fabtech-dirt-logic-2-5-stainless-steel-coilover-shock-absorber-fts26059-for-toyota-fj-cruiser-4runner-and-tacoma","title":"Fabtech Dirt Logic 2.5 Stainless Steel Coilover Shock Absorber FTS26059 for Toyota FJ Cruiser, 4Runner and Tacoma","description":"\u003cp\u003eUpgrade the suspension performance of your lifted Toyota truck or SUV with the Fabtech Dirt Logic 2.5 Stainless Steel Coilover Shock Absorber, part number FTS26059. Designed for select 2011–2015 Toyota FJ Cruiser, 4Runner, and Tacoma applications, this coilover shock delivers improved control, durability, and corrosion resistance for demanding street and off-road use. Its OEM shock stroke and vehicle-specific design help provide a direct bolt-on installation when used with the appropriate suspension system.\u003cbr\u003eThe Dirt Logic 2.5 features a high-grade 304 stainless steel shock body with a detailed machined finish for long-lasting corrosion resistance and a clean appearance. A NitroSteel® piston rod provides increased hardness and corrosion protection compared with conventional chromed rods, helping the shock withstand harsh terrain, moisture, and repeated suspension cycles. The coilover assembly uses spherical bearings at each end for enhanced strength, while urethane misalignment cups in the top caps help reduce road noise transferred through the bearings.\u003cbr\u003eFabtech equips this Dirt Logic coilover with a high-quality coil spring engineered to go solid without breaking, settling, or bowing. The spring is preset with the proper preload, allowing the shock to be installed without additional adjustment. The shock is intended for lifted trucks and is built to support consistent suspension control during aggressive off-road driving. Its stainless steel and aluminum construction combines durability with dependable thermal performance for extended use.\u003cbr\u003eVehicle compatibility includes select 2011–2015 Toyota FJ Cruiser, 2012–2015 Toyota 4Runner, and 2012–2013 Toyota Tacoma applications. Confirm the vehicle year, model, suspension configuration, and required installation hardware before ordering. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26059\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: 304 stainless steel shock body with aluminum coilover components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Type: Dirt Logic 2.5 coilover shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: OEM\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUsage: Designed for lifted trucks and demanding off-road applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Rod: NitroSteel® material for increased hardness and corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Spherical bearings with urethane misalignment cups\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoil Spring: Preset preload for installation without additional adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2011–2015 Toyota FJ Cruiser, 2012–2015 Toyota 4Runner, and 2012–2013 Toyota Tacoma models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Warning: California Proposition 65—Cancer and Reproductive Harm\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nShock Stroke: OEM\u003cbr\u003e\nUsage: Lifted Trucks\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26059\u003cbr\u003e\nPart Number: FTS26059\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772099068013,"sku":"FTS26059","price":1626.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS26059-beauty.jpg?v=1792234875"},{"product_id":"fabtech-fts26010bk-coil-spring-spacer-kit-for-toyota-fj-cruiser-4runner-and-tacoma","title":"Fabtech FTS26010BK Coil Spring Spacer Kit for Toyota FJ Cruiser, 4Runner and Tacoma","description":"\u003cp\u003eUpgrade your vehicle’s suspension setup with the Fabtech FTS26010BK Coil Spring Spacer Kit. Designed to provide a practical way to adjust coil spring positioning, this spacer kit is manufactured from high-quality materials for dependable performance and long-term durability. It is a suitable choice for drivers seeking a reliable suspension component for compatible Toyota applications.\u003cbr\u003eThe Fabtech coil spring spacer kit is engineered for installation on select 2011–2014 Toyota FJ Cruiser, Toyota 4Runner and Toyota Tacoma models. Before ordering, verify your vehicle’s year, make, model and suspension configuration to ensure proper compatibility. The application-specific design helps support a straightforward installation when used with the appropriate suspension components and installation procedures.\u003cbr\u003eFabtech part number FTS26010BK identifies this coil spring spacer kit for accurate product selection and replacement. Fabtech is recognized for producing suspension components designed for off-road and performance-oriented applications, making this kit a dependable option for suspension maintenance or upgrades. Professional installation is recommended, and all installation instructions should be followed carefully.\u003cbr\u003eThis product contains a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26010BK\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Coil spring spacer kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial Quality: Made from high-quality materials for dependable durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Fits select 2011–2014 Toyota FJ Cruiser, Toyota 4Runner and Toyota Tacoma models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for compatible suspension systems and coil spring positioning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation is recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26010BK\u003cbr\u003e\nPart Number: FTS26010BK\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013\u003cbr\u003e\nToyota Tacoma  2014","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772124332141,"sku":"FTS26010BK","price":151.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k7019-beauty_SPACER.jpg?v=1792235334"}],"url":"https:\/\/truckarmy.com\/collections\/suspension-for-2024-toyota-4runner.oembed?page=2","provider":"Truck Army","version":"1.0","type":"link"}