{"title":"Suspension for 2025 Chevrolet Colorado","description":null,"products":[{"product_id":"bilstein-b8-5160-remote-reservoir-shock-absorber-25-336689","title":"Bilstein B8 5160 Remote Reservoir Shock Absorber 25-336689","description":"B8 5160 - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein B8 5160 remote reservoir shock absorber, part number 25-336689, is engineered as a direct-fit suspension upgrade for lifted light trucks and SUVs. Designed for demanding off-road use, this shock combines a remote reservoir with Bilstein’s proven monotube construction to increase cooling capacity, support greater wheel travel, and maintain consistent damping performance during extended driving. The application-specific velocity-sensitive digressive valving helps provide responsive control on changing terrain while supporting a confident ride on and off the road.\u003cbr\u003eA 46mm monotube piston delivers consistent, fade-resistant performance across a wide range of conditions. The shock features non-adjustable damping, a zinc-plated finish, a smooth non-coilover body, and a 14mm shaft. Its 360-degree swivel banjo hose fitting helps simplify routing and supports a clean installation, while the included billet reservoir clamp secures the remote reservoir where applicable. Black bellows provide additional protection for the shock assembly in harsh environments.\u003cbr\u003eThe Bilstein B8 5160 is designed for direct fitment on the front suspension of select Chevrolet Colorado and GMC Canyon models. It uses 14.1mm eye-style upper and lower mounts and provides a 9.64-inch stroke between a 15.25-inch collapsed length and a 24.89-inch extended length. The shock is not a coilover and does not include a spring seat. Verify vehicle configuration and suspension lift requirements before ordering to ensure proper fitment. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5160 remote reservoir shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 25-336689\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension upgrade for select lifted Chevrolet Colorado and GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube construction for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Remote reservoir for increased cooling capacity and wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Velocity-sensitive digressive valving with non-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: 14.1mm eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 9.64 inches of stroke\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtection: Black bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHardware: Billet reservoir clamp included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nSeries: B8 5160\u003cbr\u003e\nCollapsed Length (In): 15.25\u003cbr\u003e\nBillet Reservoir Clamp Included: Yes\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 24.89\u003cbr\u003e\nStroke\/Travel Length (In): 9.64\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (Mm): 387.3\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nStroke\/Travel Length (Mm): 244.9\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (Mm): 632.0\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL25-336689\u003cbr\u003e\nPart Number: 25-336689\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771384135789,"sku":"25336689","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-336689_2.jpg?v=1792221500"},{"product_id":"bilstein-b6-4600-monotube-suspension-shock-absorber-24-336659-for-2023-2026-chevrolet-colorado","title":"Bilstein B6 4600 Monotube Suspension Shock Absorber 24-336659 for 2023-2026 Chevrolet Colorado","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck with the Bilstein B6 4600 suspension shock absorber, part number 24-336659. Designed as a direct-fit replacement for original equipment shock absorbers, this application-specific unit is engineered for the 2023, 2024, 2025, and 2026 Chevrolet Colorado. The B6 4600 series provides improved ride quality, handling, and comfort without requiring vehicle modifications or a lift kit.\u003cbr\u003eThe 46mm monotube design helps deliver consistent, fade-free performance across changing driving conditions by maintaining reliable damping control. A velocity-sensitive, digressive piston responds quickly to road variations, helping the shock absorber control suspension movement over uneven pavement, rough trails, and everyday driving surfaces. Bilstein tunes each B6 4600 shock absorber for its specific vehicle application to help provide balanced performance and predictable handling.\u003cbr\u003eThis Bilstein shock absorber features non-adjustable damping, a yellow-painted finish, and a blue straight protective boot. It uses an eye-style upper mount with a 14.1mm opening and an eye-style lower mount with a 14.1mm opening. The unit does not include a spring seat or external reservoir and is intended for light-truck applications. Its extended length is 23.70 inches, while its collapsed length is 15.03 inches. Professional installation is recommended, and fitment should be verified before purchase. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height 2023-2026 Chevrolet Colorado models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B6 4600 series shock absorber, part number 24-336659\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning supports improved ride quality and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping for straightforward installation and operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper and lower eye mounts with 14.1mm openings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eYellow-painted finish with blue straight protective boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length: 23.70 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length: 15.03 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo spring seat or external reservoir included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSegment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nExtended Length (Mm): 602.0\u003cbr\u003e\nCollapsed Length (In): 15.03\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nCollapsed Length (Mm): 381.8\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 23.70\u003cbr\u003e\nBoot Included: Blue Straight\u003cbr\u003e\nAaiaid Part Number: BBGL24-336659\u003cbr\u003e\nPart Number: 24-336659\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771404189805,"sku":"24336659","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-336659_1.jpg?v=1792222646"},{"product_id":"bilstein-b6-4600-front-suspension-shock-absorber-24-336536-for-chevrolet-colorado","title":"Bilstein B6 4600 Front Suspension Shock Absorber 24-336536 for Chevrolet Colorado","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck with the Bilstein B6 4600 suspension shock absorber, part number 24-336536. Designed as a direct-fit replacement and performance upgrade for original equipment shock absorbers, this Bilstein shock helps improve ride quality, handling, and comfort without requiring extensive modifications. It is engineered for compatible 2023–2026 Chevrolet Colorado applications and is tuned specifically for the vehicle platform to deliver balanced performance on the street and over changing road surfaces.\u003cbr\u003eThe B6 4600 uses a 46mm monotube design to provide consistent, fade-resistant damping in demanding driving conditions. Its velocity-sensitive, digressive piston responds quickly to changes in road input, helping maintain tire contact and vehicle control while reducing excessive body motion. The non-adjustable damping calibration is application-specific, offering dependable performance without manual setup or adjustment. A smooth-body construction, yellow painted finish, and durable design make this shock absorber suitable for light-truck use.\u003cbr\u003eInstallation features a stem-style upper mount and crossbar lower mount for direct-fit compatibility. The shock includes a spring seat and is designed without an external reservoir or protective boot. With a 20.51-inch extended length, 15.96-inch collapsed length, and 4.55-inch travel, the Bilstein B6 4600 provides reliable suspension control for stock-height Chevrolet Colorado models. Please verify vehicle fitment and suspension configuration before ordering. This product contains a California Proposition 65 warning regarding cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit performance upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B6 4600 series shock absorber, part number 24-336536\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning for compatible 2023–2026 Chevrolet Colorado models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping calibrated for dependable everyday performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body construction with durable yellow painted finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStem-style upper mount and crossbar lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e20.51-inch extended length and 15.96-inch collapsed length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e4.55 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir and no boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nCollapsed Length (Mm): 405.5\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 115.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 521.0\u003cbr\u003e\nCollapsed Length (In): 15.96\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 20.51\u003cbr\u003e\nStroke\/Travel Length (In): 4.55\u003cbr\u003e\nAaiaid Part Number: BBGL24-336536\u003cbr\u003e\nPart Number: 24-336536\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771404288109,"sku":"24336536","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_62bb1c52-2538-40ac-be3a-f2950ddb4dbf.jpg?v=1792222663"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-24-336529-for-chevrolet-colorado","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 24-336529 for Chevrolet Colorado","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck’s suspension with the Bilstein B8 5100 suspension shock absorber, part number 24-336529. Designed as a direct-fit replacement for lifted trucks and SUVs, this shock absorber is specifically tuned for select Chevrolet Colorado applications from 2023 through 2026. Its performance-focused design helps improve ride quality, handling, control, and comfort on both paved roads and demanding terrain.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube construction that provides consistent, fade-resistant performance under changing driving conditions. A velocity-sensitive, digressive piston responds quickly to road irregularities while maintaining controlled damping during cornering, braking, and off-road driving. The shock absorber features a smooth body design, zinc-plated finish, black bellows boot, and non-adjustable damping for reliable, application-specific performance without the need for manual adjustments.\u003cbr\u003eThis Bilstein shock absorber has an eye-style upper mount and an eye-style lower mount with a 14.1mm lower mounting specification. It provides 8.85 inches of suspension travel, with a collapsed length of 15.24 inches and an extended length of 24.09 inches. The unit includes no reservoir, coilover spring seat, or adjustable damping mechanism, making it a straightforward replacement for compatible suspension setups. Verify vehicle application and axle position before installation.\u003cbr\u003eFeatures: Bilstein B8 5100 series suspension shock absorber\u003cbr\u003eFeatures: Direct-fit design for compatible 2023-2026 Chevrolet Colorado models\u003cbr\u003eFeatures: 46mm monotube construction for consistent, fade-resistant performance\u003cbr\u003eFeatures: Velocity-sensitive digressive piston for responsive damping control\u003cbr\u003eFeatures: Smooth body, zinc-plated finish with black bellows boot\u003cbr\u003eFeatures: Eye-style upper and lower mounts\u003cbr\u003eFeatures: 8.85 inches of stroke or travel\u003cbr\u003eFeatures: Non-adjustable damping with no external reservoir\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design for compatible 2023-2026 Chevrolet Colorado models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube construction for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston for responsive damping control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth body, zinc-plated finish with black bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.85 inches of stroke or travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 8.85\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nCollapsed Length (Mm): 387.3\u003cbr\u003e\nStroke\/Travel Length (Mm): 224.8\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 612.0\u003cbr\u003e\nCollapsed Length (In): 15.24\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 24.09\u003cbr\u003e\nAaiaid Part Number: BBGL24-336529\u003cbr\u003e\nPart Number: 24-336529\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771404484717,"sku":"24336529","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_e98227ba-fe2a-4718-9d97-236738c565ad.jpg?v=1792222686"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-336345-for-chevrolet-colorado","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-336345 for Chevrolet Colorado","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your truck with the Bilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-336345. Designed for front OE coilover-style suspension systems, this shock absorber provides improved handling, increased wheel travel, and dependable control for demanding street and off-road driving. It fits 2023–2026 Chevrolet Colorado models and offers a practical way to help level the vehicle when used with compatible OE springs.\u003cbr\u003eThe B8 5100 features multiple snap-ring grooves that allow the spring seat position to be adjusted for up to 3 inches of front lift, depending on the vehicle application. Its 46mm monotube design uses a digressive piston and self-adjusting deflective-disc valving to provide consistent damping and fade-free performance across changing road conditions. The non-adjustable damping calibration is engineered to deliver predictable suspension control without requiring manual tuning.\u003cbr\u003eBuilt for light-truck use, this Bilstein shock absorber has a smooth-body design, zinc-plated finish, crossbar lower mount, and stem upper mount. The included spring seat supports the ride-height adjustment feature, while the absence of a reservoir and protective boot keeps the configuration straightforward for installation. With an extended length of 20.91 inches, a collapsed length of 15.96 inches, and 4.95 inches of travel, the shock absorber is designed to support increased suspension movement while maintaining controlled response. Professional installation is recommended, and fitment should be verified before ordering. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2023–2026 Chevrolet Colorado models with compatible front OE coilover-style suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 Ride Height Adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-336345\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height Adjustment: Multiple snap-ring grooves provide up to 3 inches of front lift with OE springs, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: 46mm monotube shock absorber with digressive piston and self-adjusting deflective-disc valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Delivers consistent, fade-free damping, increased wheel travel, and improved handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Crossbar lower mount and stem upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 4.95 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 20.91 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 15.96 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 405.5\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 125.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 531.0\u003cbr\u003e\nCollapsed Length (In): 15.96\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 20.91\u003cbr\u003e\nStroke\/Travel Length (In): 4.95\u003cbr\u003e\nAaiaid Part Number: BBGL24-336345\u003cbr\u003e\nPart Number: 24-336345\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771404681325,"sku":"24336345","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_916a8744-4d06-49c6-9702-f331744cb0c3.jpg?v=1792222708"},{"product_id":"fabtech-k1205dl-uni-ball-upper-control-arm-lift-system-with-shocks-for-2023-2026-chevrolet-colorado-and-gmc-canyon","title":"Fabtech K1205DL Uni-Ball Upper Control Arm Lift System with Shocks for 2023-2026 Chevrolet Colorado and GMC Canyon","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade the suspension performance and stance of your midsize truck with the Fabtech K1205DL Uni-Ball Upper Control Arm Lift System with Shocks. Designed specifically for the 2023-2026 Chevrolet Colorado and GMC Canyon, this complete lift solution combines Fabtech’s durable Uni-Ball upper control arms with matched shocks for improved suspension travel, control, and off-road capability. The system provides a 3-inch lift while maintaining a clean, modern appearance under the vehicle.\u003cbr\u003eFabtech Uni-Ball upper control arms are engineered to deliver enhanced strength and durability in demanding driving conditions. The Uni-Ball design helps accommodate increased suspension travel and provides a robust alternative to conventional ball joints when used in lifted applications. Included shocks help complement the lift system by supporting controlled damping and a more balanced ride over changing terrain.\u003cbr\u003eThe Fabtech K1205DL is a practical choice for drivers seeking improved ground clearance and suspension performance without sacrificing the factory-based fitment of their Chevrolet Colorado or GMC Canyon. This kit is designed for the listed model years and should be installed by a qualified professional using appropriate suspension installation procedures. Verify vehicle compatibility before ordering. California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K1205DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSystem Type: Uni-Ball upper control arm lift system with shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: 2023-2026 Chevrolet Colorado and GMC Canyon\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eControl Arms: Durable Uni-Ball upper control arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Supports increased suspension travel, strength, and off-road capability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Designed for listed Chevrolet Colorado and GMC Canyon applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 3\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK1205DL\u003cbr\u003e\nPart Number: K1205DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771680718957,"sku":"K1205DL","price":3380.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/2024-GMC-CANYON-1.jpg?v=1792226775"},{"product_id":"fabtech-k1204-uniball-uca-lift-system-with-shocks-for-2023-2026-chevrolet-colorado-and-gmc-canyon","title":"Fabtech K1204 Uniball UCA Lift System with Shocks for 2023-2026 Chevrolet Colorado and GMC Canyon","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade the suspension performance and stance of your midsize truck with the Fabtech K1204 Uniball UCA Lift System with Shocks. Designed for select 2023-2026 Chevrolet Colorado and GMC Canyon models, this complete lift solution provides approximately 3 inches of lift while combining durable uniball upper control arms with matched shocks. The system is engineered to improve suspension geometry, ground clearance, and overall capability for street, trail, and off-road driving.\u003cbr\u003eThe Fabtech K1204 kit is designed as a complete suspension upgrade rather than a simple spacer lift. Uniball upper control arms provide increased articulation and durable pivot movement, helping support proper suspension operation through demanding terrain. Included shocks help complement the lifted suspension setup, providing controlled damping and a more composed ride than using lift components alone. Vehicle-specific fitment supports straightforward integration with compatible factory suspension components.\u003cbr\u003eThis Fabtech lift system fits 2023, 2024, 2025, and 2026 Chevrolet Colorado models, along with 2023, 2024, 2025, and 2026 GMC Canyon models. Verify the vehicle configuration and installation requirements before ordering. Professional installation is recommended to ensure correct assembly, suspension alignment, and safe operation after installation. Alignment should be checked after installation and whenever suspension components are replaced or adjusted.\u003cbr\u003eThis product contains a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. The Fabtech K1204 is a practical suspension upgrade for drivers seeking additional ride height, improved suspension articulation, and dependable shock performance in a vehicle-specific package.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K1204\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: Approximately 3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Components: Uniball upper control arms with shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2023-2026 Chevrolet Colorado\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2023-2026 GMC Canyon\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Suspension lift and performance upgrade\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation and post-installation alignment recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 3\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK1204\u003cbr\u003e\nPart Number: K1204\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771681374317,"sku":"K1204","price":1190.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/2024-GMC-CANYON-1_a95387d0-e19e-4454-b333-b498b6240b34.jpg?v=1792226794"},{"product_id":"fabtech-fts99100-suspension-block-and-u-bolt-kit-for-chevrolet-colorado-and-gmc-canyon","title":"Fabtech FTS99100 Suspension Block and U-Bolt Kit for Chevrolet Colorado and GMC Canyon","description":"Block And U-Bolt Kit\n\u003cp\u003eUpgrade the rear suspension of your truck with the Fabtech FTS99100 Suspension Block and U-Bolt Kit. Designed to support proper leaf-spring positioning, this kit helps provide a secure, dependable connection between the axle and suspension components. It is an ideal replacement or installation component for compatible Chevrolet Colorado and GMC Canyon applications.\u003cbr\u003eThe Fabtech FTS99100 is engineered for a direct-fit installation when used with the appropriate suspension setup. The kit includes a suspension block and matching U-bolts, helping maintain reliable clamping force and alignment. Other parts may be required to complete the installation, so verify your vehicle configuration and suspension requirements before ordering.\u003cbr\u003eThis Fabtech suspension block and U-bolt kit fits select 2023–2026 Chevrolet Colorado and GMC Canyon models. Confirm exact fitment with your vehicle year and suspension package to ensure compatibility. Professional installation is recommended for suspension-related components, and all fasteners should be tightened according to the applicable manufacturer specifications.\u003cbr\u003eThis product carries a California Proposition 65 warning. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS99100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Suspension block and U-bolt kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for select Chevrolet Colorado and GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Compatible with 2023–2026 Chevrolet Colorado and GMC Canyon applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Other parts may be required for a complete set\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS99100\u003cbr\u003e\nPart Number: FTS99100\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771762442349,"sku":"FTS99100","price":89.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/DE2A9082.jpg?v=1792228817"},{"product_id":"fabtech-dirt-logic-2-5-stainless-steel-reservoir-coilover-shock-absorber-fts21305","title":"Fabtech Dirt Logic 2.5 Stainless Steel Reservoir Coilover Shock Absorber FTS21305","description":"Dirt Logic 2.5 Stainless Steel Resi Coil Over Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your truck with the Fabtech Dirt Logic 2.5 Stainless Steel Reservoir Coilover Shock Absorber, part number FTS21305. Designed for select Chevrolet Colorado and GMC Canyon applications, this coilover combines durable construction with tunable performance for improved control on the street and off road. Its stainless steel body is engineered to resist corrosion and withstand demanding driving conditions.\u003cbr\u003eThe Dirt Logic 2.5 coilover features a remote reservoir design that helps support consistent damping performance during extended use. The coilover configuration allows the shock and spring assembly to work together as a complete suspension component, helping enhance ride quality, vehicle stability, and off-road handling. It is a direct-fit suspension solution for compatible applications and is built to Fabtech standards for dependable performance.\u003cbr\u003eThis Fabtech shock absorber fits 2023-2026 Chevrolet Colorado and GMC Canyon models, including select configurations. Verify vehicle application and suspension setup before ordering to ensure compatibility. Professional installation is recommended for proper fitment, adjustment, and suspension system operation. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS21305\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Dirt Logic 2.5 stainless steel reservoir coilover shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Corrosion-resistant stainless steel body for demanding use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Reservoir-equipped coilover assembly for consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits select 2023-2026 Chevrolet Colorado and GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Direct-fit suspension component; professional installation recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS21305\u003cbr\u003e\nPart Number: FTS21305\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772229353581,"sku":"FTS21305","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/2.5_RESI.png?v=1792237926"},{"product_id":"fabtech-fts21304-shock-spacer-kit-for-2023-2026-chevrolet-colorado-and-gmc-canyon","title":"Fabtech FTS21304 Shock Spacer Kit for 2023–2026 Chevrolet Colorado and GMC Canyon","description":"\u003cp\u003eUpgrade suspension performance with the Fabtech FTS21304 Shock Spacer Kit, designed for select 2023–2026 Chevrolet Colorado and GMC Canyon applications. This kit helps provide the necessary spacing for compatible shock and coilover suspension configurations while supporting proper installation and dependable functionality. Manufactured by Fabtech, the FTS21304 is a purpose-built suspension component for drivers and installers seeking a reliable fit for their late-model truck or SUV.\u003cbr\u003eThe Fabtech FTS21304 Shock Spacer Kit is engineered for use with the vehicle applications listed below and is suitable for suspension upgrades, replacement installations, or custom suspension setups where additional shock spacing is required. Its application-specific design helps simplify installation and maintain compatibility with the surrounding suspension components when used as intended. Verify vehicle year, model, and suspension configuration before ordering to ensure the correct application.\u003cbr\u003eCompatible applications include the 2023, 2024, 2025, and 2026 Chevrolet Colorado, as well as the 2023, 2024, 2025, and 2026 GMC Canyon. Professional installation is recommended for suspension components, and all hardware should be installed and tightened according to the applicable vehicle and Fabtech installation instructions. This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS21304\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Shock spacer kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Compatible with select 2023–2026 Chevrolet Colorado models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Compatible with select 2023–2026 GMC Canyon models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFunction: Supports proper shock and coilover spacing during suspension installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Application-specific construction for dependable fit and functionality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation is recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS21304\u003cbr\u003e\nPart Number: FTS21304\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772229714029,"sku":"FTS21304","price":90.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/LIFETSTYLE_Chevy.jpg?v=1792237938"},{"product_id":"fabtech-fts21302-uniball-control-arm-kit-for-2023-2026-chevrolet-colorado-and-gmc-canyon","title":"Fabtech FTS21302 Uniball Control Arm Kit for 2023-2026 Chevrolet Colorado and GMC Canyon","description":"Uniball Control Arms\n\u003cp\u003eUpgrade the front suspension of your truck with the Fabtech FTS21302 Uniball Control Arm Kit. Designed for select 2023-2026 Chevrolet Colorado and GMC Canyon models, this control arm kit provides a purpose-built solution for drivers seeking improved suspension performance and dependable off-road durability. The uniball design supports smooth suspension articulation while helping maintain consistent wheel alignment through demanding driving conditions.\u003cbr\u003eFabtech engineered the FTS21302 control arms for strength and reliable fitment on compatible vehicles. The kit is designed to work with the vehicle’s suspension system while offering enhanced clearance and articulation compared with many factory-style components. Its robust construction makes it well suited for off-road use, lifted applications, and other environments where increased suspension capability is required.\u003cbr\u003eProfessional installation is recommended to ensure proper assembly, alignment, and suspension operation. Always verify vehicle compatibility before ordering, including model year and configuration. This Fabtech control arm kit is compatible with 2023, 2024, 2025, and 2026 Chevrolet Colorado models, as well as 2023, 2024, 2025, and 2026 GMC Canyon models. California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS21302\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Uniball control arm kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2023-2026 Chevrolet Colorado\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2023-2026 GMC Canyon\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Design: Uniball construction for enhanced articulation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Suitable for off-road and lifted suspension setups\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation and alignment recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS21302\u003cbr\u003e\nPart Number: FTS21302\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Colorado  2023\u003cbr\u003e\nChevrolet Colorado  2024\u003cbr\u003e\nChevrolet Colorado  2025\u003cbr\u003e\nChevrolet Colorado  2026\u003cbr\u003e\nGMC Canyon  2023\u003cbr\u003e\nGMC Canyon  2024\u003cbr\u003e\nGMC Canyon  2025\u003cbr\u003e\nGMC Canyon  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772229910637,"sku":"FTS21302","price":809.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS21302_1.jpg?v=1792237950"}],"url":"https:\/\/truckarmy.com\/collections\/suspension-for-2025-chevrolet-colorado.oembed","provider":"Truck Army","version":"1.0","type":"link"}