{"title":"Suspension for 2025 Ford Bronco","description":null,"products":[{"product_id":"bilstein-b8-6112-suspension-kit-47-314009-for-2021-2026-ford-bronco","title":"Bilstein B8 6112 Suspension Kit 47-314009 for 2021-2026 Ford Bronco","description":"B8 6112 - Suspension Kit\n\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Bilstein B8 6112 Suspension Kit, part number 47-314009. Designed for light trucks and SUVs, this direct-fit kit increases ground clearance, supports larger tires, and improves wheel travel for enhanced on-road control and off-road capability. The vehicle-specific tuning delivers balanced performance while maintaining dependable ride quality across varied terrain.\u003cbr\u003eThe kit includes two 60mm Bilstein monotube shock absorbers, two custom-matched cold-wound coil springs, and two billet aluminum spring seats. Multiple snap-ring grooves in the shock body allow the spring seat position to be adjusted for up to 2.75 inches of front lift, depending on the application. This adjustable configuration gives you flexibility when setting up your Bronco for clearance, stance, and trail performance.\u003cbr\u003eEach shock features a large 2.65-inch outside diameter body, an 18mm shaft, and a 60mm digressive piston that provides precise damping control without requiring external reservoirs or damping adjustments. The snap-ring grooved coilover body, zinc-plated dampers, and black springs are engineered for durability in demanding driving conditions. Bilstein B8 6112 performance helps provide confident handling, improved suspension response, and reliable support for both daily driving and off-road use.\u003cbr\u003eFitment: 2021 Ford Bronco, 2022 Ford Bronco, 2023 Ford Bronco, 2024 Ford Bronco, 2025 Ford Bronco, and 2026 Ford Bronco. This kit is designed for the front suspension and includes spring seats for installation. Professional installation is recommended to ensure proper setup and alignment. This product contains a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for 2021-2026 Ford Bronco applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Type: Complete front suspension kit with two shock absorbers, two coil springs, and two billet aluminum spring seats.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Adjustment: Multiple snap-ring grooves provide up to 2.75 inches of front lift, depending on application.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Design: Bilstein B8 6112 monotube shocks with a 60mm digressive piston and large 2.65-inch body.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable damping with vehicle-specific tuning for balanced on-road and off-road performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoilover Body: Snap-ring grooved body allows adjustable spring seat positioning.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Zinc-plated dampers, black cold-wound springs, and an 18mm shock shaft.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Non-reservoir design for a direct-fit installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: Provides 8.45 inches of shock travel, with a 17.11-inch collapsed length and 25.56-inch extended length.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nCollapsed Length (In): 17.11\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nStroke\/Travel Length (In): 8.45\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (In): 25.56\u003cbr\u003e\nStroke\/Travel Length (Mm): 214.7\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nSeries: B8 6112\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 288\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nCollapsed Length (Mm): 434.6\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 649.3\u003cbr\u003e\nAaiaid Part Number: BBGL47-314009\u003cbr\u003e\nPart Number: 47-314009\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771203453037,"sku":"47314009","price":923.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/47-314009_1.jpg?v=1792219431"},{"product_id":"bilstein-b8-8112-black-hawk-rear-right-corner-module-41-314333-for-ford-bronco","title":"Bilstein B8 8112 Black Hawk Rear Right Corner Module 41-314333 for Ford Bronco","description":"B8 8112 Black Hawk - Rear Right Corner Module\n\u003cp\u003eUpgrade the rear suspension of your Ford Bronco with the Bilstein B8 8112 Black Hawk rear right corner module, part number 41-314333. Designed as a direct-fit solution for select 2021–2026 Ford Bronco models, this coilover assembly delivers controlled performance on paved roads, rugged trails, and varying load conditions. The B8 8112 Black Hawk series combines advanced damping technology with durable construction for drivers who demand responsive handling and a smooth, composed ride.\u003c\/p\u003e\n\u003cp\u003eThe module uses a large aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve heat dissipation during demanding use. Bilstein ZoneControl® position-sensitive damping helps reduce harsh bottoming while maintaining comfort over smaller impacts. Three external damping adjustments provide independent high- and low-speed compression tuning, while the internal bump stop adds further control through the suspension travel range. Click adjusters make it easier to tailor the rear suspension to driving conditions, terrain, and vehicle load.\u003c\/p\u003e\n\u003cp\u003eFinished with EVO Grey dampers and a black spring, this smooth-body coilover includes a spring seat and a special upper mount configuration. The lower eye mount uses a 1-inch mounting interface with Heim spacers, and the assembly features a 60 mm piston, 22 mm shaft, and a 288 lb\/in rear main spring rate. The reservoir is finned aluminum, and the design is intended for light-truck applications. No boot is included. This Bilstein B8 8112 Black Hawk corner module is engineered to provide the adjustability, durability, and suspension control needed for serious Ford Bronco use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2021–2026 Ford Bronco. This product contains a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBilstein B8 8112 Black Hawk rear right corner module\u003c\/li\u003e\n\u003cli\u003ePart number 41-314333\u003c\/li\u003e\n\u003cli\u003eDirect-fit application for select 2021–2026 Ford Bronco models\u003c\/li\u003e\n\u003cli\u003eAluminum shock body with finned aluminum remote reservoir\u003c\/li\u003e\n\u003cli\u003eZoneControl® position-sensitive damping technology\u003c\/li\u003e\n\u003cli\u003eHigh- and low-speed compression click adjusters\u003c\/li\u003e\n\u003cli\u003eInternal bump stop for enhanced bottoming control\u003c\/li\u003e\n\u003cli\u003e60 mm piston and 22 mm shaft\u003c\/li\u003e\n\u003cli\u003eSmooth-body coilover design\u003c\/li\u003e\n\u003cli\u003eEVO Grey damper with black spring\u003c\/li\u003e\n\u003cli\u003eSpring seat included\u003c\/li\u003e\n\u003cli\u003eLower eye mount with 1-inch interface and Heim spacers\u003c\/li\u003e\n\u003cli\u003e288 lb\/in rear main spring rate\u003c\/li\u003e\n\u003cli\u003eBoot not included\u003c\/li\u003e\n\u003cli\u003eLight-truck suspension application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 26.60\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 674.6\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 25.4mm with Heim Spacers\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 288\u003cbr\u003e\nCollapsed Length (Mm): 467.1\u003cbr\u003e\nCollapsed Length (In): 18.40\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-314333\u003cbr\u003e\nPart Number: 41-314333\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771258929261,"sku":"41314333","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-314333_1.jpg?v=1792219792"},{"product_id":"bilstein-b8-8112-black-hawk-rear-left-corner-module-41-314326-for-ford-bronco","title":"Bilstein B8 8112 Black Hawk Rear Left Corner Module 41-314326 for Ford Bronco","description":"B8 8112 Black Hawk - Rear Left Corner Module\n\u003cp\u003eUpgrade the rear suspension of your Ford Bronco with the Bilstein B8 8112 Black Hawk Rear Left Corner Module, part number 41-314326. Designed as a direct-fit solution for select 2021–2026 Ford Bronco models, this high-performance coilover combines advanced damping control, durable construction, and trail-ready versatility. It is engineered to deliver controlled handling on paved roads, rugged trails, and under varying load conditions.\u003cbr\u003eThe Bilstein B8 8112 Black Hawk features a smooth aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve cooling during demanding driving. Its monotube internal design and large piston support consistent damping performance, while ZoneControl® position-sensitive damping helps reduce harsh bottoming and maintain a composed ride over smaller impacts. The integrated internal bump stop further expands suspension control through challenging terrain.\u003cbr\u003eThree external damping adjustments provide independent high- and low-speed compression tuning, allowing drivers to tailor suspension response to vehicle setup, cargo, and driving conditions. The coilover includes a spring seat and uses a special upper mount with an eye-style lower mount and Heim spacers. EVO Gray dampers and black springs provide a functional, professional appearance suited to the Bilstein B8 8112 Black Hawk series.\u003cbr\u003eThis Bilstein rear left corner module is intended for light-truck applications and fits 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. Professional installation is recommended, followed by proper suspension setup and alignment. California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit rear left corner module for select 2021–2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eB8 8112 Black Hawk series coilover with monotube internal design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum shock body with finned aluminum remote reservoir for increased oil capacity and cooling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl® position-sensitive damping helps reduce harsh bottoming\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThree-way damping adjustment with high- and low-speed compression clickers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal adjustable bump stop for enhanced suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included with black coil spring and EVO Gray damper finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and eye-style lower mount with Heim spacers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e22 mm shaft and 60 mm piston for consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for light-truck use on paved roads and rugged trails\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nExtended Length (Mm): 674.6\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 25.4mm with Heim Spacers\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 26.60\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 467.1\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 288\u003cbr\u003e\nCollapsed Length (In): 18.40\u003cbr\u003e\nAaiaid Part Number: BBGL41-314326\u003cbr\u003e\nPart Number: 41-314326\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771259650157,"sku":"41314326","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-314326_1.jpg?v=1792219811"},{"product_id":"bilstein-b8-8112-black-hawk-front-right-corner-module-41-314227-for-ford-bronco","title":"Bilstein B8 8112 Black Hawk Front Right Corner Module 41-314227 for Ford Bronco","description":"B8 8112 Black Hawk - Front Right Corner Module\n\u003cp\u003eUpgrade the front right suspension of your Ford Bronco with the Bilstein B8 8112 Black Hawk 3-way adjustable coilover corner module, part number 41-314227. Designed as a direct-fit solution for 2021–2026 Ford Bronco models, this light-truck suspension component combines durable construction, advanced damping control, and a carefully matched spring setup for confident performance on paved roads and rugged trails. The front main spring is rated at 400 pounds per inch, and the included spring seat helps simplify installation.\u003cbr\u003eThe B8 8112 Black Hawk uses a large 2.65-inch aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve heat dissipation during demanding driving. Its monotube internal design and 60 mm piston support consistent damping performance, while the 22 mm shaft provides strength for off-road use. EVO Gray dampers and black springs create a functional, understated finish suitable for a wide range of vehicle builds.\u003cbr\u003eBilstein’s ZoneControl® position-sensitive damping system manages compression and rebound behavior across changing suspension positions, helping reduce harsh bottoming while maintaining controlled response over smaller impacts. Click adjusters provide separate high- and low-speed compression tuning, and the internal bump stop adds another layer of bottoming control. The assembly features a smooth-body coilover design, crossbar lower mount, special upper mount, and remote reservoir configuration. Aftermarket upper control arms are required for installation. This module is intended for the front right corner and does not include a protective boot.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8112 Black Hawk\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 41-314227\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front right corner module for 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Smooth-body adjustable coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustment: High- and low-speed compression click adjusters with internal bump stop\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping Technology: ZoneControl® position-sensitive compression and rebound control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum with finned remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 22 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Rate: 400 pounds per inch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Crossbar lower mount with special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Control Arms: Aftermarket upper arms required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Gray dampers with black springs\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 594.7\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nExtended Length (In): 23.40\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nCollapsed Length (Mm): 446.2\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nCollapsed Length (In): 17.59\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 400\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nAaiaid Part Number: BBGL41-314227\u003cbr\u003e\nPart Number: 41-314227\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771262402669,"sku":"41314227","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-314227_6.jpg?v=1792219837"},{"product_id":"bilstein-b8-6100-ride-height-adjustable-monotube-shock-absorber-24-325578-for-ford-bronco","title":"Bilstein B8 6100 Ride Height Adjustable Monotube Shock Absorber 24-325578 for Ford Bronco","description":"B8 6100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck or SUV suspension with the Bilstein B8 6100 ride height adjustable shock absorber, part number 24-325578. Designed for front OE coilover-style suspension systems, this performance shock uses multiple snap-ring grooves to reposition the spring seat and provide a ride-height adjustment range of up to 3 inches, depending on the application. It fits the 2021–2026 Ford Bronco and is engineered for drivers who need improved control, durability, and performance on rough terrain.\u003cbr\u003eThe B8 6100 features a large 60mm monotube body that increases oil capacity, improves heat dissipation, and supports consistent performance during demanding use. Its 60mm digressive piston responds quickly to changing terrain, helping provide a smoother ride while maintaining stronger control over bumps, uneven surfaces, and rugged roads. The zinc-plated finish adds corrosion resistance for long-term service in challenging conditions.\u003cbr\u003eThis Bilstein shock absorber includes a spring seat and uses a stem-style upper mount with a 20.2mm eye lower mount. It has non-adjustable damping, an 18mm shaft, and no external reservoir or protective boot. The shock extends to 25.56 inches, collapses to 17.11 inches, and provides 8.45 inches of travel. Installation and compatibility should be verified against the vehicle’s suspension configuration before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRide height adjustable: Multiple snap-ring grooves allow spring seat positioning for up to 3 inches of adjustment, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube design: Provides consistent damping performance and efficient heat management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e60mm piston: Supports increased oil capacity, improved cooling, and enhanced durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDigressive damping: Helps deliver a smoother ride with improved control over rough terrain\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2021–2026 Ford Bronco models with compatible front OE coilover-style suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Stem-style upper mount and 20.2mm eye lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat: Included for adjustable coilover installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping adjustment: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated for added corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: Provides 8.45 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number: Bilstein 24-325578\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 649.3\u003cbr\u003e\nCollapsed Length (In): 17.11\u003cbr\u003e\nStroke\/Travel Length (In): 8.45\u003cbr\u003e\nLower Mount Type: Eye 20.2mm\u003cbr\u003e\nSeries: B8 6100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 434.6\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 214.6\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nExtended Length (In): 25.56\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-325578\u003cbr\u003e\nPart Number: 24-325578\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771470970989,"sku":"24325578","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-325578_1.jpg?v=1792222906"},{"product_id":"bilstein-b8-6100-ride-height-adjustable-front-suspension-shock-absorber-24-325561-for-ford-bronco","title":"Bilstein B8 6100 Ride Height Adjustable Front Suspension Shock Absorber 24-325561 for Ford Bronco","description":"B8 6100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your truck or SUV with the Bilstein B8 6100 Ride Height Adjustable shock absorber, part number 24-325561. Designed for vehicles with a front original-equipment coilover-style suspension, this monotube shock features multiple snap-ring grooves that allow the spring seat position to be adjusted. Depending on the application, the adjustable design can provide up to 3 inches of ride-height range while maintaining controlled suspension movement.\u003cbr\u003eThe Bilstein B8 6100 uses a large 2.65-inch outside-diameter body and a 60mm digressive piston to increase oil capacity, heat dissipation, and long-term durability. This design helps deliver a smoother ride and improved control over rough terrain, uneven roads, and other demanding driving conditions. The zinc-plated finish adds corrosion resistance, while the included spring seat supports proper coilover installation.\u003cbr\u003eThis non-adjustable damping shock absorber has a crossbar lower mount, stem upper mount, 18mm shaft, and no external reservoir or boot. It provides 22.80 inches of extended length, 16.62 inches of collapsed length, and 6.18 inches of travel. The Bilstein B8 6100 24-325561 is designed for light-truck applications and fits the 2021–2026 Ford Bronco. Professional installation is recommended, and vehicle-specific fitment should be confirmed before ordering. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: B8 6100 Ride Height Adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front coilover-style suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height Adjustment: Up to 3 inches, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring grooved coilover body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Size: 2.65-inch outside diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Crossbar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 18mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.80 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 16.62 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 6.18 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 579.2\u003cbr\u003e\nCollapsed Length (In): 16.62\u003cbr\u003e\nStroke\/Travel Length (In): 6.18\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nSeries: B8 6100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 422.2\u003cbr\u003e\nStroke\/Travel Length (Mm): 157.0\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-325561\u003cbr\u003e\nPart Number: 24-325561\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771479425133,"sku":"24325561","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-325561_1.jpg?v=1792222924"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-323567-for-ford-bronco","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-323567 for Ford Bronco","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your 2021–2026 Ford Bronco with the Bilstein B8 5100 ride height adjustable shock absorber, part number 24-323567. Designed for vehicles with an OE coilover-style suspension, this shock uses multiple snap-ring grooves to provide adjustable spring-seat positioning and up to 3 inches of front lift with the original equipment springs, depending on the application. It is an effective solution for leveling the vehicle while improving control and usable wheel travel.\u003cbr\u003eThe Bilstein B8 5100 features a 46mm monotube design with a digressive piston and self-adjusting deflective disc valving. This configuration delivers consistent damping, fade-resistant performance, and responsive handling across changing road and trail conditions. The zinc-plated finish supports long-term durability, while the snap-ring grooved coilover body allows ride-height adjustment without requiring a separate lift spring. The shock uses non-adjustable damping and does not include a reservoir.\u003cbr\u003eThis Bilstein shock absorber is engineered for light-truck applications and uses an eye-style lower mount with a stem-style upper mount. The original equipment spring seat should be reused because a spring seat is not included. The unit also does not include a boot. With a compressed length of 17.11 inches, an extended length of 25.56 inches, and 8.45 inches of travel, the 24-323567 provides dependable suspension control for compatible Ford Bronco configurations. Verify application details and mounting requirements before installation. California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-323567\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5100 Ride Height Adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front suspension shock absorber for OE coilover-style systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height Adjustment: Multiple snap-ring grooves provide up to 3 inches of front lift with OE springs, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube with digressive piston and self-adjusting deflective disc valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Eye-style lower mount and stem-style upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 8.45 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included; reuse the original equipment spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSegment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 20.2mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 434.6\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nStroke\/Travel Length (Mm): 214.6\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (In): 25.56\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No - Reuse OEM\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 649.3\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.11\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 8.45\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-323567\u003cbr\u003e\nPart Number: 24-323567\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771500888173,"sku":"24323567","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-323567_1.jpg?v=1792222980"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-323550-for-ford-bronco","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-323550 for Ford Bronco","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your 2021–2026 Ford Bronco with the Bilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-323550. Designed for trucks and SUVs with a front original-equipment coilover-style suspension, this shock uses multiple snap-ring grooves to adjust the spring seat position. With compatible OE springs, the adjustable design can provide approximately 0–3 inches of front lift, helping level the vehicle while increasing wheel travel and improving handling.\u003cbr\u003eThe Bilstein B8 5100 features a 46mm monotube design with a digressive piston and self-adjusting deflective disc valve technology. This configuration delivers consistent, fade-resistant damping across changing road and trail conditions while maintaining responsive suspension control. The zinc-plated finish supports durability, and the non-adjustable damping is tuned for dependable performance without requiring manual settings.\u003cbr\u003eThis Bilstein shock absorber uses a snap-ring-grooved coilover body, a crossbar lower mount, and a stem-style upper mount. The OEM spring seat must be reused, and no boot or reservoir is included. The shock has a 22.80-inch extended length, a 16.62-inch collapsed length, and 6.17 inches of travel. It is intended for the front suspension of applicable Ford Bronco models and should be matched with the correct vehicle configuration before installation. A Prop 65 warning applies: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Front suspension shock absorber for compatible 2021–2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 Ride Height Adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-323550\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustment Range: Provides approximately 0–3 inches of front lift with compatible OE springs, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube construction with digressive piston technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable with self-adjusting deflective disc valve control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring-grooved coilover body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Crossbar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.80 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 16.62 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 6.17 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Reuse OEM spring seat; not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 422.2\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 156.7\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No - Reuse OEM\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 579.2\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 16.62\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 6.17\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-323550\u003cbr\u003e\nPart Number: 24-323550\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771508359277,"sku":"24323550","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-323550_2.jpg?v=1792223002"},{"product_id":"bilstein-b8-6100-ride-height-adjustable-monotube-shock-absorber-24-318594-for-ford-bronco","title":"Bilstein B8 6100 Ride Height Adjustable Monotube Shock Absorber 24-318594 for Ford Bronco","description":"B8 6100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck or SUV suspension with the Bilstein B8 6100 ride height adjustable shock absorber, part number 24-318594. Designed for vehicles equipped with a front original-equipment coilover-style suspension, this shock uses multiple snap-ring grooves in the body to provide adjustable spring-seat positioning and a ride-height adjustment range of up to 3 inches, depending on the application. It is engineered for the 2021–2026 Ford Bronco and is an excellent choice for drivers who need improved control and durability on rough roads and challenging terrain.\u003cbr\u003eThe B8 6100 features a large 2.65-inch body with a 60mm digressive piston, increasing oil capacity and improving heat dissipation for consistent performance during demanding driving conditions. Its monotube internal design helps maintain responsive damping, while the zinc-plated finish provides added protection against corrosion. The shock is non-adjustable for damping and does not include a remote reservoir or protective boot. A spring seat is included to support the adjustable coilover-style installation.\u003cbr\u003eThis Bilstein shock absorber uses a crossbar lower mount and stem upper mount for application-specific installation. It has a 16.62-inch collapsed length, a 22.80-inch extended length, and 6.18 inches of stroke. The 18mm shaft is designed for strength and long-term reliability, while the large piston and body support controlled handling without sacrificing ride comfort. Verify vehicle configuration and suspension compatibility before installation. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: B8 6100 ride height adjustable suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-318594\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring grooved coilover body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height Adjustment: Up to 3 inches, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Crossbar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.80 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 16.62 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 6.18 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProp 65 Warning: Cancer and reproductive harm; visit www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nSeries: B8 6100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 422.2\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 157.0\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 579.2\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 16.62\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 6.18\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-318594\u003cbr\u003e\nPart Number: 24-318594\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771510194285,"sku":"24318594","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-318594_1.jpg?v=1792223018"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-313971-for-ford-bronco","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-313971 for Ford Bronco","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eBilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-313971, is engineered for select Ford Bronco models with a front original-equipment coilover-style suspension. Designed for light-truck applications, this front shock absorber helps improve ride control, handling, and wheel travel while providing a practical way to level the vehicle when used with the original equipment springs.\u003c\/p\u003e\n\u003cp\u003eThe snap-ring grooved body provides multiple spring-seat positions, allowing approximately 0 to 3 inches of front lift depending on the vehicle application and selected setting. The spring seat is not included and is designed for reuse of the original equipment component. This Bilstein B8 5100 shock absorber features a 46mm monotube design with a digressive piston and self-adjusting deflective-disc valve technology for consistent damping and fade-resistant performance across changing road and load conditions. Damping is non-adjustable, and no external reservoir is used.\u003c\/p\u003e\n\u003cp\u003eBuilt for durability, the shock absorber uses a zinc-plated finish, an 18mm shaft, a crossbar lower mount, and a stem-style upper mount. Its travel range supports demanding suspension movement while the monotube internal design promotes reliable heat dissipation. This unit does not include a protective boot. It is intended for the front suspension and should be installed according to the vehicle manufacturer’s procedures, with proper attention to spring, mount, and alignment requirements.\u003c\/p\u003e\n\u003cp\u003eBilstein B8 5100 part number 24-313971 fits select 2021–2026 Ford Bronco models. Verify vehicle configuration, suspension type, and application details before ordering. California Proposition 65 warning: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\n\u003cli\u003ePart Number: 24-313971\u003c\/li\u003e\n\u003cli\u003eSeries: B8 5100 Ride Height Adjustable\u003c\/li\u003e\n\u003cli\u003eApplication: Front suspension shock absorber for select Ford Bronco models\u003c\/li\u003e\n\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\n\u003cli\u003eRide Height Adjustment: Multiple snap-ring grooves provide approximately 0–3 inches of front lift depending on application\u003c\/li\u003e\n\u003cli\u003eInternal Design: 46mm monotube with digressive piston and self-adjusting deflective-disc valve\u003c\/li\u003e\n\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\n\u003cli\u003eBody Design: Snap-ring grooved coilover body\u003c\/li\u003e\n\u003cli\u003eSpring Seat: Not included; reuse the original equipment spring seat\u003c\/li\u003e\n\u003cli\u003eLower Mount: Crossbar\u003c\/li\u003e\n\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\n\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\n\u003cli\u003eReservoir: None\u003c\/li\u003e\n\u003cli\u003eProtective Boot: Not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (Mm): 422.2\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 157.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 579.2\u003cbr\u003e\nCollapsed Length (In): 16.62\u003cbr\u003e\nStroke\/Travel Length (In): 6.18\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nSpring Seat Included: No - Reuse OEM\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-313971\u003cbr\u003e\nPart Number: 24-313971\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771513372781,"sku":"24313971","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-313971_1.jpg?v=1792223205"},{"product_id":"fabtech-k2427dl-ball-joint-for-2021-2026-ford-bronco","title":"Fabtech K2427DL Ball Joint for 2021-2026 Ford Bronco","description":"\u003cp\u003eThe Fabtech K2427DL Ball Joint is designed for select 2021-2026 Ford Bronco applications and supports reliable suspension performance for lifted and off-road vehicles. Built for use with Fabtech suspension systems, this replacement ball joint helps maintain controlled movement between the upper control arm and steering knuckle while supporting improved suspension articulation.\u003cbr\u003eFabtech ball joints are engineered for compatibility with the brand’s Bronco lift kit and upper control arm systems. When paired with Fabtech Dirt Logic 2.5 coilovers, the suspension setup can provide additional front wheel travel and a balanced ride both on and off the road. The low-maintenance design helps reduce routine service requirements while delivering dependable operation in demanding driving conditions.\u003cbr\u003eThe Fabtech K2427DL Ball Joint is suitable for Ford Bronco models from 2021 through 2026. It is a practical replacement component for maintaining proper suspension function and supporting the performance goals of a Fabtech-equipped vehicle. This system is backed by Fabtech’s 5-Year\/60,000-Mile Powertrain Warranty when applicable to the complete qualifying system.\u003cbr\u003eThis product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov. Verify vehicle compatibility and suspension system requirements before installation. Professional installation is recommended to ensure correct fitment, alignment, and safe operation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2427DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Ball joint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021-2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Low-maintenance ball joint for Fabtech upper control arm systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Replacement or suspension system component for lifted and off-road Bronco applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Designed for use with Fabtech Bronco lift kits and Dirt Logic 2.5 coilovers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Supports front suspension articulation, wheel travel, and balanced on-road or off-road handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Covered by Fabtech’s 5-Year\/60,000-Mile Powertrain Warranty when applicable to a qualifying system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2427DL\u003cbr\u003e\nPart Number: K2427DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771563180141,"sku":"K2427DL","price":4661.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2427dl-beauty-2_2DOOR.jpg?v=1792224295"},{"product_id":"fabtech-k2426dl-ball-joint-for-2021-2026-ford-bronco","title":"Fabtech K2426DL Ball Joint for 2021-2026 Ford Bronco","description":"\u003cp\u003eUpgrade your suspension with the Fabtech K2426DL Ball Joint, designed for compatible 2021-2026 Ford Bronco applications. This replacement ball joint is engineered for use with Fabtech upper control arms and helps support reliable suspension movement during daily driving, trail use, and off-road operation.\u003c\/p\u003e\n\u003cp\u003eThe Fabtech K2426DL ball joint is part of a suspension system designed to improve performance when paired with Fabtech Dirt Logic 2.5 coilovers and a mild lift setup. This combination provides additional front wheel travel while maintaining a balanced ride on and off the road. Its low-maintenance design helps reduce routine service requirements, making it a practical choice for Bronco owners seeking dependable suspension performance.\u003c\/p\u003e\n\u003cp\u003eFabtech develops its suspension components to meet the demands of lifted and performance-oriented vehicles. The K2426DL ball joint is intended for Ford Bronco models from 2021 through 2026 and is backed by Fabtech's 5-year, 60,000-mile powertrain warranty when used as part of the applicable system. Professional installation is recommended to ensure proper fitment, alignment, and suspension operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e This product can expose you to chemicals, including substances known to the State of California to cause cancer and reproductive harm. Visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" target=\"_blank\" rel=\"noopener\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits 2021-2026 Ford Bronco models\u003c\/li\u003e\n\u003cli\u003eDesign: Low-maintenance ball joint for compatible Fabtech upper control arms\u003c\/li\u003e\n\u003cli\u003ePerformance: Supports increased front suspension travel with Fabtech Dirt Logic 2.5 coilovers\u003c\/li\u003e\n\u003cli\u003eUse: Suitable for balanced on-road and off-road suspension performance\u003c\/li\u003e\n\u003cli\u003eWarranty: Covered by Fabtech's 5-year, 60,000-mile powertrain warranty when applicable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2426DL\u003cbr\u003e\nPart Number: K2426DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771563311213,"sku":"K2426DL","price":4661.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2424-beauty-04_4DOOR.jpg?v=1792224300"},{"product_id":"fabtech-k2424-ball-joint-for-2021-2026-ford-bronco","title":"Fabtech K2424 Ball Joint for 2021-2026 Ford Bronco","description":"\u003cp\u003eThe Fabtech K2424 Ball Joint is designed for compatible 2021-2026 Ford Bronco suspension applications. Built to support increased suspension performance, this replacement ball joint is an important component for maintaining proper control arm movement and dependable handling on and off the road. It is well suited for use with Fabtech upper control arms and suspension systems designed for mild lift heights.\u003cbr\u003eFabtech ball joints are engineered with a focus on durability and low-maintenance operation. When paired with compatible Fabtech suspension components, including Dirt Logic 2.5 coilover systems, the K2424 can help support additional front wheel travel and a balanced ride. Its application-specific design helps provide a dependable fit for the listed Ford Bronco models while supporting the performance goals of upgraded suspension systems.\u003cbr\u003eThe Fabtech K2424 is a practical choice for Bronco owners, installers, and suspension builders seeking a replacement ball joint from a trusted suspension manufacturer. Verify vehicle application and control arm compatibility before installation. This product is associated with Fabtech part number K2424 and is intended for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2021-2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Replacement ball joint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2424\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Designed for use with compatible Fabtech upper control arms and suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Low-maintenance design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Supports suspension movement and front wheel travel in compatible upgraded systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty Support: Covered under Fabtech's applicable 5-year or 60,000-mile powertrain warranty when included with qualifying systems\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2424\u003cbr\u003e\nPart Number: K2424\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771564228717,"sku":"K2424","price":1135.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2424-kit_SPACER.jpg?v=1792224320"},{"product_id":"jks-jks8309-rear-lower-shock-skid-plates-with-roost-guards-for-2021-2025-ford-bronco","title":"JKS JKS8309 Rear Lower Shock Skid Plates with Roost Guards for 2021-2025 Ford Bronco","description":"2021-2026 Ford Bronco - Rear Lower Shock Skid\/Roost Guard (Black Struts\/Coilover\n\u003cp\u003eProtect the vulnerable rear lower shock mounts on your 2021-2025 Ford Bronco with JKS JKS8309 Rear Lower Shock Skid Plates. Designed for off-road use, these skid plates reinforce the factory shock mounts and help shield the lower shocks from rocks, ledges, and other trail obstacles. Their integrated roost guards provide additional protection for the front of the shock body or coilover against stones and debris thrown up by the tires.\u003cbr\u003eConstructed from durable 3\/16-inch steel, the JKS JKS8309 skid plates deliver dependable strength and resistance to trail impacts without compromising the factory mounting location. The precision-focused design works with the Bronco’s existing rear suspension layout, helping protect critical components while you navigate challenging terrain. These guards are an effective upgrade for drivers who want added underbody protection during recreational trail riding, rock crawling, and overland travel.\u003cbr\u003eA durable black powder-coated finish helps resist corrosion and gives the skid plates a clean, low-profile appearance beneath the vehicle. Stainless steel JKS badges add a distinctive finishing detail while identifying the quality construction of the product. The JKS JKS8309 rear lower shock skid plates are engineered for Ford Bronco models from 2021 through 2025 and are intended to help extend shock and mount durability in demanding off-road conditions.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eConstruction: Made from 3\/16-inch steel for strength and long-term durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtection: Reinforces and shields the factory rear lower shock mounts from rocks and trail obstacles\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRoost Guard: Integrated guard helps protect the front of the shock body or coilover from stones and debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Durable black powder coating helps resist corrosion and complements the Bronco chassis\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBranding: Includes stainless steel JKS badges for a clean, finished appearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Designed for 2021-2025 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAaiaid Part Number: BKWDJKS8309\u003cbr\u003e\nPart Number: JKS8309\u003cbr\u003e\nBrand Aaia: BKWD\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025","brand":"JKS","offers":[{"title":"Default Title","offer_id":67771564556397,"sku":"JKS8309","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/JKS8309_01.jpg?v=1792224332"},{"product_id":"fabtech-k2396dl-6-inch-lift-kit-with-dirt-logic-2-5-reservoir-coilovers-for-2021-2026-ford-bronco","title":"Fabtech K2396DL 6-Inch Lift Kit with Dirt Logic 2.5 Reservoir Coilovers for 2021-2026 Ford Bronco","description":"\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2396DL 6-Inch Lift Kit, engineered for demanding off-road performance and dependable on-road handling. This suspension system is designed to accommodate 38-inch or 40-inch tires while helping maintain proper factory alignment characteristics. Heavy-duty construction and carefully matched suspension components provide the added clearance and strength needed for trail use, rocky terrain, and challenging muddy conditions.\u003cbr\u003eThe kit features Fabtech Dirt Logic 2.5 reservoir coilovers, which are built to deliver consistent damping performance and reliable control during aggressive driving. Constructed with 1\/4-inch-thick steel components, the system is designed to withstand the stresses of off-road use. Included skid plates add protection for vulnerable underbody areas, helping shield critical components from trail debris and obstacles. The result is a complete lift solution that combines increased ground clearance with robust suspension performance.\u003cbr\u003eFabtech K2396DL is engineered specifically for Ford Bronco applications from 2021 through 2026 and is FMVSS 126 certified. The kit is backed by a 5-year or 60,000-mile powertrain warranty, providing additional confidence for daily driving and off-road adventures. Professional installation is recommended to ensure proper fitment, alignment, and suspension setup. This lift kit is intended for drivers seeking a stronger, higher-clearance Bronco suspension system with the capability to support larger tires and demanding trail conditions. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Fits 2021-2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: Provides 6 inches of suspension lift\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Clearance: Designed to accommodate 38-inch or 40-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Made with heavy-duty 1\/4-inch-thick steel components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoilovers: Includes Dirt Logic 2.5 reservoir coilovers for controlled suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtection: Includes skid plates to help protect underbody components during off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCertification: FMVSS 126 certified\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Backed by a 5-year or 60,000-mile powertrain warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: Fabtech K2396DL\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 6\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2396DL\u003cbr\u003e\nPart Number: K2396DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771575435373,"sku":"K2396DL","price":4725.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2396dl-beauty-02.jpg?v=1792224587"},{"product_id":"fabtech-k2395dl-5-inch-6-inch-lift-kit-with-dirt-logic-2-5-reservoir-coilovers-for-2021-2026-ford-bronco","title":"Fabtech K2395DL 5-Inch\/6-Inch Lift Kit with Dirt Logic 2.5 Reservoir Coilovers for 2021-2026 Ford Bronco","description":"\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2395DL 5-inch\/6-inch Lift Kit, engineered for demanding off-road performance and dependable on-road handling. Built from durable 1\/4-inch-thick steel, this suspension system delivers the strength needed for challenging trails while providing clearance for 38-inch or 40-inch tires. The kit is designed to help maintain factory alignment characteristics, supporting predictable handling and stability across varied terrain.\u003c\/p\u003e\n\u003cp\u003eThe Fabtech K2395DL includes Dirt Logic 2.5 reservoir coilovers that provide reliable suspension performance during extended off-road use. Integrated skid plates add protection for vulnerable underbody components when navigating rocks, ruts, and uneven surfaces. With its combination of increased ground clearance, heavy-duty construction, and performance-focused shocks, this lift kit is suited for Bronco owners who want to tackle technical trails without sacrificing everyday drivability.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the Ford Bronco, this Fabtech lift kit offers a complete suspension upgrade backed by FMVSS 126 certification. Professional installation is recommended to ensure proper fitment, alignment, and suspension setup. The kit is compatible with 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLift Height: Provides approximately 5 inches of suspension lift for increased ground clearance\u003c\/li\u003e\n\u003cli\u003eTire Clearance: Designed to accommodate 38-inch or 40-inch tires under the fenders\u003c\/li\u003e\n\u003cli\u003eConstruction: Made with durable 1\/4-inch-thick steel for enhanced strength and durability\u003c\/li\u003e\n\u003cli\u003eCoilovers: Includes Dirt Logic 2.5 reservoir coilovers for reliable off-road suspension performance\u003c\/li\u003e\n\u003cli\u003eProtection: Includes skid plates to help shield underbody components from trail hazards\u003c\/li\u003e\n\u003cli\u003eAlignment: Designed to help maintain factory alignment characteristics after installation\u003c\/li\u003e\n\u003cli\u003eCertification: FMVSS 126 certified for confidence in vehicle stability performance\u003c\/li\u003e\n\u003cli\u003eFitment: Fits 2021-2026 Ford Bronco models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 5\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2395DL\u003cbr\u003e\nPart Number: K2395DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771576418413,"sku":"K2395DL","price":5357.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2395dl-beauty-02.jpg?v=1792224605"},{"product_id":"fabtech-k2391-5-inch-6-inch-lift-kit-with-dirt-logic-2-5-reservoir-coilovers-for-2021-2026-ford-bronco","title":"Fabtech K2391 5-Inch\/6-Inch Lift Kit with Dirt Logic 2.5 Reservoir Coilovers for 2021-2026 Ford Bronco","description":"\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2391 Lift Kit, engineered for demanding off-road performance and dependable on-road handling. This suspension system provides approximately 5 inches of lift and is designed to accommodate 38-inch or 40-inch tires while helping maintain factory alignment characteristics. Heavy-duty 1\/4-inch steel construction delivers the strength needed for rocky trails, muddy terrain, and other challenging driving conditions.\u003cbr\u003eThe kit includes Dirt Logic 2.5 reservoir coilovers, which are built to provide reliable damping performance and improved suspension control during extended off-road use. Integrated skid plates add protection for vulnerable underbody components, helping shield your Bronco from rocks, debris, and trail obstacles. The result is a balanced suspension upgrade that supports increased ground clearance without sacrificing confidence behind the wheel.\u003cbr\u003eFabtech part number K2391 is designed for Ford Bronco models from 2021 through 2026. The suspension system is FMVSS 126 certified and backed by a 5-year or 60,000-mile powertrain warranty, providing additional assurance for your vehicle upgrade. Professional installation is recommended, and freight delivery may be required due to the size and weight of the kit. California Proposition 65 warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for 2021-2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: Provides approximately 5 inches of suspension lift\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Clearance: Supports 38-inch or 40-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Built from heavy-duty 1\/4-inch steel for enhanced strength\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping System: Includes Dirt Logic 2.5 reservoir coilovers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUnderbody Protection: Includes skid plates to help protect critical components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAlignment: Designed to help maintain factory alignment characteristics\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCertification: FMVSS 126 certified\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarranty: Includes a 5-year or 60,000-mile powertrain warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: Fabtech K2391\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 5\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2391\u003cbr\u003e\nPart Number: K2391\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771577499757,"sku":"K2391","price":2181.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2391-beauty-02.jpg?v=1792224623"},{"product_id":"fabtech-k2390dl-uniball-uca-lift-system-with-shocks-for-2021-2026-ford-bronco","title":"Fabtech K2390DL Uniball UCA Lift System with Shocks for 2021–2026 Ford Bronco","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade your 2021–2026 Ford Bronco with the Fabtech K2390DL Uniball UCA Lift System with Shocks. Designed for enthusiasts who demand dependable suspension performance, this system combines engineered lift components with shocks to improve clearance, handling, and off-road capability. Fabtech applies more than 20 years of aftermarket suspension experience, advanced design software, precision fabrication equipment, and rigorous testing to develop products built for demanding driving conditions.\u003cbr\u003eThe Fabtech K2390DL system features upper control arms designed to eliminate the factory-style upper ball joint, supporting improved suspension geometry and durable operation after lifting. With a 4-inch lift height, the kit provides additional ground clearance and helps accommodate larger tires while maintaining a purposeful, well-engineered suspension setup. The included shocks are matched to the lift system for controlled damping and enhanced ride quality on pavement, trails, and rough terrain.\u003cbr\u003eFabtech suspension components are developed by experienced engineers and fabricators with a focus on fit, function, and long-term reliability. The K2390DL is intended for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models, making it a practical choice for drivers seeking a complete lift solution from a recognized suspension brand. Professional installation is recommended, and alignment should be performed after installation. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2390DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Uniball upper control arm lift system with shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 4 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Control Arms: Designed to eliminate the upper ball joint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Design: Engineered and tested for off-road performance and dependable operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation and post-installation alignment recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 4\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2390DL\u003cbr\u003e\nPart Number: K2390DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771578220653,"sku":"K2390DL","price":5203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2390dl-beauty-2.jpg?v=1792224634"},{"product_id":"fabtech-k2389dl-uniball-uca-3-inch-lift-system-with-shocks-for-2021-2026-ford-bronco","title":"Fabtech K2389DL Uniball UCA 3-Inch Lift System with Shocks for 2021-2026 Ford Bronco","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2389DL Uniball UCA Lift System with Shocks. Designed for a 3-inch lift, this suspension kit combines uniball upper control arms with matched shocks to improve suspension performance, ground clearance, and off-road capability. The upper control arms eliminate the factory upper ball joint, providing a durable and purpose-built solution for lifted applications.\u003cbr\u003eFabtech draws on more than 20 years of aftermarket suspension development experience to engineer products for demanding off-road use. Advanced design software, precision fabrication equipment, experienced engineers, and rigorous testing support the development of the K2389DL suspension system. The result is a carefully engineered upgrade designed to deliver reliable performance and proper suspension geometry on lifted Ford Bronco models.\u003cbr\u003eThe Fabtech K2389DL kit is engineered specifically for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco applications. It is a practical choice for enthusiasts seeking improved suspension travel and dependable performance while maintaining a professionally designed suspension package. Professional installation is recommended, and additional components or alignment adjustments may be required depending on the vehicle configuration and intended use. This product contains a California Proposition 65 warning: Cancer and Reproductive Harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3-inch lift system designed to improve ground clearance and off-road capability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniball upper control arms eliminate the factory upper ball joint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes shocks matched to the Fabtech suspension system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineered for 2021-2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned and tested by Fabtech for demanding off-road applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2389DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 3\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2389DL\u003cbr\u003e\nPart Number: K2389DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771579170925,"sku":"K2389DL","price":5203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2389dl-beauty-2.jpg?v=1792224650"},{"product_id":"zone-offroad-adventure-pro-series-upper-control-arm-kit-zonf2303-for-2021-2025-ford-bronco","title":"Zone Offroad Adventure Pro Series Upper Control Arm Kit ZONF2303 for 2021-2025 Ford Bronco","description":"Zone Upper Control Arm Kit\n\u003cp\u003eUpgrade the factory upper control arms on your 2021-2025 Ford Bronco with the Zone Offroad Adventure Pro Series Upper Control Arm Kit, part number ZONF2303. Engineered for lifted Bronco applications, this kit is designed to increase suspension droop travel while providing enhanced strength and dependable performance for off-road driving. The high-strength steel construction is built to withstand demanding trail conditions and repeated suspension movement.\u003c\/p\u003e\u003cp\u003eEach Zone Offroad control arm is supplied ready for installation with rubber bushings and heavy-duty ball joints preinstalled. This convenient configuration helps simplify installation and eliminates the need to source and press in separate components. The finished design also adds a rugged appearance that complements modified Bronco suspension systems.\u003c\/p\u003e\u003cp\u003eThe Zone Offroad ZONF2303 Upper Control Arm Kit is an effective suspension upgrade for drivers seeking improved durability, additional articulation, and reliable performance on lifted Ford Bronco setups. It is specifically designed to fit 2021, 2022, 2023, 2024, and 2025 Ford Bronco models. Professional installation is recommended, and suspension alignment should be checked after installation. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHigh-strength steel construction designed for off-road durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for lifted 2021-2025 Ford Bronco suspension setups\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncreases suspension droop travel and articulation potential\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHeavy-duty ball joints preinstalled for convenient installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRubber bushings preinstalled and ready for installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRugged Adventure Pro Series design from Zone Offroad\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2021-2025 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: FQMSZONF2303\u003cbr\u003e\nPart Number: ZONF2303\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771580252269,"sku":"ZONF2303","price":459.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/zonf2303_zone-upper-control-arm-pr.jpg?v=1792224671"},{"product_id":"fabtech-k2385dl-uniball-uca-lift-system-with-shocks-for-2021-2026-ford-bronco","title":"Fabtech K2385DL Uniball UCA Lift System with Shocks for 2021-2026 Ford Bronco","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Fabtech K2385DL Uniball UCA Lift System with Shocks. Designed for off-road enthusiasts who demand improved ground clearance, suspension performance, and durability, this complete lift system combines Fabtech’s uniball upper control arms with matched shocks for a balanced suspension upgrade. The system provides a 4-inch lift while helping maintain dependable handling across demanding trails and varied terrain.\u003c\/p\u003e\n\u003cp\u003eFabtech develops its suspension components using advanced design software, precision fabrication equipment, extensive testing, and years of aftermarket suspension experience. The K2385DL replaces the factory upper ball joint arrangement with uniball upper control arms engineered for increased strength and articulation. This design supports improved suspension movement and reliable performance during off-road use, while the included shocks help control suspension travel for a more composed ride.\u003c\/p\u003e\n\u003cp\u003eBuilt for the Ford Bronco platform, this Fabtech lift system is a practical choice for drivers seeking enhanced off-road capability without compromising suspension engineering. The components are designed to work together as a complete system, helping provide consistent performance and a durable foundation for larger tires and additional trail-focused upgrades. Professional installation is recommended to ensure proper setup, alignment, and suspension operation.\u003c\/p\u003e\n\u003cp\u003eFitment includes 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\n\u003cli\u003ePart Number: K2385DL\u003c\/li\u003e\n\u003cli\u003eProduct Type: Uniball upper control arm lift system with shocks\u003c\/li\u003e\n\u003cli\u003eApplication: 2021-2026 Ford Bronco\u003c\/li\u003e\n\u003cli\u003eLift Height: 4 inches\u003c\/li\u003e\n\u003cli\u003eSuspension Design: Upper control arms eliminate the factory upper ball joint\u003c\/li\u003e\n\u003cli\u003ePerformance: Engineered for improved off-road suspension travel, control, and durability\u003c\/li\u003e\n\u003cli\u003eInstallation: Professional installation and alignment are recommended\u003c\/li\u003e\n\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 4\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2385DL\u003cbr\u003e\nPart Number: K2385DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771581268077,"sku":"K2385DL","price":5203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2385dl-beauty-02.jpg?v=1792224691"},{"product_id":"zone-offroad-zonf1221-2-inch-lift-kit-for-ford-bronco-badlands-and-sasquatch","title":"Zone Offroad ZONF1221 2-Inch Lift Kit for Ford Bronco Badlands and Sasquatch","description":"Zone 2\" Lift Kit\n\u003cp\u003eUpgrade the stance and off-road capability of your 2021–2025 Ford Bronco with the Zone Offroad ZONF1221 2-Inch Lift Kit. Designed for Badlands models and Sasquatch-equipped Broncos, this suspension lift kit raises the front by 2 inches and the rear by 1 inch to reduce the factory nose-down rake while creating clearance for tires up to 35 inches. The kit is engineered around the Bronco’s four-corner coilover suspension to preserve ride quality, handling, and everyday drivability.\u003cbr\u003eThe ZONF1221 uses top-mounted front strut spacers and front spring perch spacers to provide lift and leveling without replacing the factory coilovers. Heavy-duty, semi-aromatic glass-fiber-reinforced nylon spacers deliver strength and a clean original-equipment appearance after installation. Included bump stop extensions help maintain appropriate suspension, steering, and driveline operating angles during demanding off-road use, while replacement hardware supports a secure installation.\u003cbr\u003eThis Zone Offroad lift kit is designed for bolt-on installation using basic hand tools, with no welding or metal cutting required. Installation typically takes 2–3 hours and has a difficulty rating of 2 out of 5. Step-by-step instructions are included to help streamline the installation process. Optional Zone Adventure Pro Series Upper Control Arms are available separately for additional strength and suspension performance. Compatible wheel and tire combinations include 35 x 12.5-inch tires with 17 x 9-inch wheels or 20 x 9-inch wheels, subject to vehicle configuration and clearance considerations. California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFits 2021–2025 Ford Bronco models, including Badlands and Sasquatch-equipped applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides a 2-inch front lift and 1-inch rear lift\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLevels the vehicle stance and reduces the factory nose-down rake\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCreates clearance for tires up to 35 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUses top-mounted front strut spacers and spring perch spacers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintains factory ride quality and everyday drivability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes bump stop extensions for improved suspension and driveline geometry\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstructed from heavy-duty glass-fiber-reinforced nylon resin\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolt-on installation requires no welding or metal cutting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEstimated installation time is 2–3 hours\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation difficulty is rated 2 out of 5\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes replacement hardware and step-by-step instructions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with 17 x 9-inch and 20 x 9-inch wheel applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional Adventure Pro Series Upper Control Arms are available separately\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nBack Spacing: 5-5.5\"\u003cbr\u003e\nBack Spacing 2: 5\"-6\"\u003cbr\u003e\nInstallation Time: 2 -3hrs\u003cbr\u003e\nAdjustable: No\u003cbr\u003e\nFront Lift Height: 2\"\u003cbr\u003e\nRear Lift Height: 1\"\u003cbr\u003e\nFront Lift Method: Strut Spacers\u003cbr\u003e\nLift Type: Lift Kit\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nMax Tire Size: 35 x 12.5\u003cbr\u003e\nMax Tire Size 2: 35 x 11.2\"\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nRequires Welding: No\u003cbr\u003e\nWheel Size: 17 x 9\u003cbr\u003e\nWheel Size 2: 20 x 9\u003cbr\u003e\nInstallation Difficulty: 2 out of 5\u003cbr\u003e\nRequired Tools: Basic Hand Tools\u003cbr\u003e\nAaiaid Part Number: FQMSZONF1221\u003cbr\u003e\nPart Number: ZONF1221\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771581562989,"sku":"ZONF1221","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/F1221_03.jpg?v=1792224698"},{"product_id":"fabtech-k2384-uniball-upper-control-arm-lift-kit-for-2021-2026-ford-bronco","title":"Fabtech K2384 Uniball Upper Control Arm Lift Kit for 2021–2026 Ford Bronco","description":"Uniball UCA Lift Kit\n\u003cp\u003eUpgrade the front suspension of your 2021–2026 Ford Bronco with the Fabtech K2384 Uniball Upper Control Arm Lift Kit. Designed as a durable replacement for factory ball-joint upper control arms, this kit increases strength and provides reliable performance during demanding off-road use. The arms also add caster compared with the stock configuration, helping improve on-road handling and alignment when running oversized tires on lifted or modified vehicles.\u003cbr\u003eFabtech builds the K2384 upper control arms from .120-inch-wall, 1.50-inch-outside-diameter 4130 chromoly tubing for rugged strength and long-term durability. Each arm uses an American-made 1-inch FK stainless steel PTFE-lined uniball to support smooth, dependable suspension movement. Heat-treated 17-4 stainless steel uniball pins fit the factory ball-joint tapers without requiring spindle modification, allowing the suspension to be returned to stock configuration when needed. Matching 17-4 stainless steel misalignment spacers provide proper clearance throughout the full range of suspension travel.\u003cbr\u003eOn the frame side, durable urethane bushings help reduce road noise while supporting consistent performance over time. This Fabtech uniball UCA kit is engineered for drivers who want a stronger, more capable alternative to stock upper control arms without sacrificing practical street manners. It fits 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDesigned for 2021–2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides increased front suspension strength for aggressive off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdds caster compared with factory upper control arms for improved oversized-tire handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstructed from .120-inch-wall, 1.50-inch-outside-diameter 4130 chromoly tubing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes American-made 1-inch FK stainless steel PTFE-lined uniballs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003es heat-treated 17-4 stainless steel uniball pins that fit factory ball-joint tapers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUses 17-4 stainless steel misalignment spacers for proper uniball clearance through suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes durable urethane frame-side bushings to help reduce road noise\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupports installation without spindle modification\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2384\u003cbr\u003e\nPart Number: K2384\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771582251117,"sku":"K2384","price":1227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2384-beauty-02.jpg?v=1792224709"},{"product_id":"fabtech-k2383-uniball-upper-control-arm-lift-kit-for-2021-2026-ford-bronco","title":"Fabtech K2383 Uniball Upper Control Arm Lift Kit for 2021-2026 Ford Bronco","description":"Uniball UCA Lift Kit\n\u003cp\u003eUpgrade the front suspension of your 2021-2026 Ford Bronco with the Fabtech K2383 Uniball Upper Control Arm Lift Kit. Designed for demanding off-road use, this kit replaces the factory upper control arms and ball joints with heavy-duty components engineered for improved strength, durability, and suspension performance. It is an effective upgrade for stock or lifted Broncos running oversized tires.\u003c\/p\u003e\n\u003cp\u003eEach Fabtech upper control arm is constructed from 1.50-inch outside-diameter 4130 chromoly tubing with a 0.120-inch wall for rugged durability. The arms use American-made 1-inch FK stainless steel PTFE-lined uniballs, along with heat-treated 17-4 stainless steel uniball pins that fit the factory ball joint tapers without requiring spindle modification. This design allows the suspension to be returned to its stock configuration when needed.\u003c\/p\u003e\n\u003cp\u003eAdditional caster compared with the factory arms helps support proper alignment and improved on-road handling when using larger tires. Fabtech 17-4 stainless steel misalignment spacers provide appropriate clearance for the uniballs throughout the suspension’s travel range. Frame-side urethane bushings help control road noise while maintaining reliable operation in rugged conditions.\u003c\/p\u003e\n\u003cp\u003eThe Fabtech K2383 Uniball Upper Control Arm Lift Kit fits 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. Professional installation and an alignment are recommended after installation. California Proposition 65 warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Fits 2021-2026 Ford Bronco models\u003c\/li\u003e\n\u003cli\u003eConstruction: 1.50-inch outside-diameter 4130 chromoly tubing with a 0.120-inch wall\u003c\/li\u003e\n\u003cli\u003eUniballs: American-made 1-inch FK stainless steel PTFE-lined uniballs\u003c\/li\u003e\n\u003cli\u003ePins: Heat-treated 17-4 stainless steel pins fit factory ball joint tapers without spindle modification\u003c\/li\u003e\n\u003cli\u003eCaster: Provides additional caster compared with stock upper control arms for improved oversized-tire fitment and on-road handling\u003c\/li\u003e\n\u003cli\u003eMisalignment Spacers: 17-4 stainless steel spacers provide proper uniball clearance throughout suspension travel\u003c\/li\u003e\n\u003cli\u003eBushings: Frame-side urethane bushings help reduce road noise and support long-term durability\u003c\/li\u003e\n\u003cli\u003eUse: Designed for stock or lifted suspension systems and demanding off-road conditions\u003c\/li\u003e\n\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\n\u003cli\u003ePart Number: K2383\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2383\u003cbr\u003e\nPart Number: K2383\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771583168621,"sku":"K2383","price":1227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2383-beauty-02.jpg?v=1792224728"},{"product_id":"fabtech-k2378dl-uniball-3-inch-lift-system-with-dirt-logic-2-5-coilover-shocks-for-ford-bronco","title":"Fabtech K2378DL Uniball 3-Inch Lift System with Dirt Logic 2.5 Coilover Shocks for Ford Bronco","description":"Uniball UCA Lift System w\/Shocks\n\u003cp\u003eUpgrade your Ford Bronco suspension with the Fabtech K2378DL Uniball Lift System with Shocks. Designed for 2021–2026 Ford Bronco models, this complete 3-inch lift kit improves suspension strength, wheel travel, and ride control for daily driving, overlanding, and weekend trail use. The system combines heavy-duty Uniball Upper Control Arms with stainless steel Dirt Logic 2.5 coilover shocks to provide a balanced, compliant ride on the street and dependable performance off-road.\u003cbr\u003eThe Fabtech Uniball Upper Control Arms are built from 1.25-inch outside-diameter chromoly tubing with .120-inch wall thickness for increased strength and long-term durability. Each arm uses a 1-inch FK stainless steel PTFE-lined Uniball that connects to the factory steering knuckle without drilling. By eliminating the factory upper ball joint, the replacement arms offer improved articulation and are engineered to work with the included Dirt Logic 2.5 coilover shocks. Cold-wound coil springs help deliver controlled suspension movement while maintaining the capability needed for demanding terrain.\u003cbr\u003eAt the rear, extended-length upper link arms accommodate increased suspension travel without binding and help maintain proper alignment with the new ride height. Matching stainless steel Dirt Logic 2.5 coilover shocks provide consistent damping and enhanced ride quality throughout the vehicle. This Fabtech suspension system is an effective choice for Bronco owners seeking increased performance without an excessively tall lift. Installation and application should be confirmed for the specific vehicle configuration before purchase. Part number K2378DL. California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: K2378DL\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Height: 3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Type: Uniball lift system with front and rear coilover shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Control Arms: Heavy-duty chromoly Uniball Upper Control Arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUniball Construction: 1-inch FK stainless steel PTFE-lined Uniballs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Shocks: Stainless steel Dirt Logic 2.5 coilover shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoil Springs: Cold-wound springs for controlled ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Link Arms: Extended-length upper links for increased travel without binding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation Benefit: Connects to the factory steering knuckle without drilling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUse: Suitable for daily driving, overlanding, and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFreight Requirement: LTL freight may be required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: t\u003cbr\u003e\nLift\/Drop Height: 3\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNK2378DL\u003cbr\u003e\nPart Number: K2378DL\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771584086125,"sku":"K2378DL","price":5203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/k2378dl-beauty-02.jpg?v=1792224745"},{"product_id":"fabtech-fts98032-control-arm-bushing-kit-for-ford-bronco","title":"Fabtech FTS98032 Control Arm Bushing Kit for Ford Bronco","description":"\u003cp\u003eRestore proper control arm performance with the Fabtech FTS98032 Control Arm Bushing Kit. Designed for select Ford Bronco applications, this replacement bushing kit helps renew the connection between the control arms and vehicle chassis, supporting dependable suspension operation and improved ride control. It is a practical choice for replacing worn, cracked, or deteriorated control arm bushings during suspension service or restoration work.\u003cbr\u003eFabtech manufactures the FTS98032 for compatibility with specified Ford Bronco models from 1966 through 1974 and the 2021 Ford Bronco. Properly functioning control arm bushings help maintain suspension geometry, reduce unwanted movement, and support consistent handling under everyday driving conditions. Verify vehicle year, suspension configuration, and application before ordering to ensure the correct fit.\u003cbr\u003eBuilt for service-focused installation, this control arm bushing kit is suited for replacement and repair projects where dependable suspension components are required. The kit is identified by Fabtech part number FTS98032 and is engineered for the listed vehicle applications. Professional installation may be recommended, especially when suspension components require specialized tools or alignment procedures.\u003cbr\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Control arm bushing kit for select Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS98032\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 1966-1974 Ford Bronco and 2021 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFunction: Helps restore control arm movement, suspension geometry, and ride control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReplacement Use: Suitable for worn or deteriorated control arm bushing service\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS98032\u003cbr\u003e\nPart Number: FTS98032\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  1966\u003cbr\u003e\nFord Bronco  1967\u003cbr\u003e\nFord Bronco  1968\u003cbr\u003e\nFord Bronco  1969\u003cbr\u003e\nFord Bronco  1970\u003cbr\u003e\nFord Bronco  1971\u003cbr\u003e\nFord Bronco  1972\u003cbr\u003e\nFord Bronco  1973\u003cbr\u003e\nFord Bronco  1974\u003cbr\u003e\nFord Bronco  1975\u003cbr\u003e\nFord Bronco  1976\u003cbr\u003e\nFord Bronco  1977\u003cbr\u003e\nFord Bronco  1978\u003cbr\u003e\nFord Bronco  1979\u003cbr\u003e\nFord Bronco  1980\u003cbr\u003e\nFord Bronco  1981\u003cbr\u003e\nFord Bronco  1982\u003cbr\u003e\nFord Bronco  1983\u003cbr\u003e\nFord Bronco  1984\u003cbr\u003e\nFord Bronco  1985\u003cbr\u003e\nFord Bronco  1986\u003cbr\u003e\nFord Bronco  1987\u003cbr\u003e\nFord Bronco  1988\u003cbr\u003e\nFord Bronco  1989\u003cbr\u003e\nFord Bronco  1990\u003cbr\u003e\nFord Bronco  1991\u003cbr\u003e\nFord Bronco  1992\u003cbr\u003e\nFord Bronco  1993\u003cbr\u003e\nFord Bronco  1994\u003cbr\u003e\nFord Bronco  1995\u003cbr\u003e\nFord Bronco  1996\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771768963181,"sku":"FTS98032","price":101.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/BRONCO_BUSHING.jpg?v=1792228913"},{"product_id":"bilstein-b1-suspension-shock-absorber-conversion-kit-11-344841-for-2021-2026-ford-bronco","title":"Bilstein B1 Suspension Shock Absorber Conversion Kit 11-344841 for 2021-2026 Ford Bronco","description":"B1 (Components) - Suspension Shock Absorber Conversion Kit\n\u003cp\u003eRestore the intended lift height and suspension performance of your 2021-2026 Ford Bronco with the Bilstein B1 (Components) Suspension Shock Absorber Conversion Kit, part number 11-344841. Designed for Broncos equipped with Bilstein B8 6112 or 6100 shock absorbers, this kit helps compensate for additional constant weight from aftermarket bumpers, winches, racks, and other accessories.\u003cbr\u003eThe Bilstein B1 conversion kit also supports upgrades to 37-inch tires by providing the additional clearance needed between the fender and tire. It is engineered to work with Bilstein shock absorbers, helping maintain proper suspension geometry and dependable performance when modifying your light truck for increased capability. This kit is intended for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models.\u003cbr\u003eKit Contents: Includes eight spring seat adapters, four jounce spacers, and a mount parts kit for a complete installation. Part Type: Shock conversion kit. Series: Bilstein B1 (Components). Segment: Light truck. Vehicle Fitment: Designed for 2021-2026 Ford Bronco applications. Professional installation is recommended to ensure correct fitment, suspension setup, and safe operation. This product contains a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Suspension shock absorber conversion kit for 2021-2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Designed for Broncos equipped with Bilstein B8 6112 or 6100 shocks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Support: Helps restore lift height when additional constant accessory weight is added\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Clearance: Supports 37-inch tire upgrades by increasing fender-to-tire clearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Eight spring seat adapters, four jounce spacers, and a mount parts kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 11-344841\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B1 (Components)\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Segment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nParttype: Shock Conversion Kit\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSeries: B1 (Components)\u003cbr\u003e\nKit Contents: 8 x Spring Seat Adapters, 4 x Jounce Spacers, Mount Parts Kit\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nAaiaid Part Number: BBGL11-344841\u003cbr\u003e\nPart Number: 11-344841\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771769094253,"sku":"11344841","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/11-344841_1.jpg?v=1792228918"},{"product_id":"fabtech-fts22359-coilover-shock-spacer-kit-for-2021-2026-ford-bronco","title":"Fabtech FTS22359 Coilover Shock Spacer Kit for 2021-2026 Ford Bronco","description":"\u003cp\u003eThe Fabtech FTS22359 Coilover Shock Spacer Kit is designed for 2021-2026 Ford Bronco models requiring additional suspension clearance and dependable support. Built for use with compatible Fabtech lift systems, this spacer kit helps optimize coilover positioning while supporting proper suspension function during street driving and off-road use. Its application-specific design makes it a practical upgrade for Bronco owners seeking reliable suspension performance.\u003cbr\u003eFabtech manufactures the FTS22359 with durable materials and a precise fit for straightforward installation with compatible components. The kit is engineered to work as part of a properly configured suspension system, helping maintain consistent shock and spring operation without compromising the vehicle’s intended handling characteristics. It is an appropriate choice for trail vehicles, overland builds, and daily-driven Broncos equipped with Fabtech suspension components.\u003cbr\u003eFor added confidence, this Fabtech shock spacer kit is backed by the brand’s focus on quality, performance, and long-term durability. Verify vehicle configuration, lift height, and suspension compatibility before ordering. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov. The Fabtech FTS22359 is a fitment-specific component for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for compatible 2021-2026 Ford Bronco suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Coilover shock spacer kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS22359\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatibility: Intended for use with compatible Fabtech lift and coilover components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Durable components engineered for dependable suspension service\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Designed for a vehicle-specific fit and proper suspension integration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning for cancer and reproductive harm\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22359\u003cbr\u003e\nPart Number: FTS22359\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772167651437,"sku":"FTS22359","price":810.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS22359_UNMOUNTED.jpg?v=1792236491"},{"product_id":"fabtech-fts22350-heavy-duty-tie-rod-kit-for-2021-2027-ford-bronco","title":"Fabtech FTS22350 Heavy-Duty Tie Rod Kit for 2021-2027 Ford Bronco","description":"Heavy Duty Tie Rod Kit\n\u003cp\u003eUpgrade your 2021-2027 Ford Bronco with the Fabtech FTS22350 Heavy-Duty Tie Rod Kit. Designed as more than a direct replacement tie rod end, this kit provides a stronger upgrade for off-road vehicles subjected to demanding terrain and increased suspension loads. Fabtech applies more than 20 years of aftermarket suspension development experience to its products, combining advanced design software, modern fabrication equipment, and experienced engineers and fabricators.\u003cbr\u003eThe Fabtech FTS22350 is developed with a focus on dependable performance, precise fitment, and long-term durability. Extensive research, suspension design expertise, and rigorous testing help Fabtech produce components that support confident off-road driving. This heavy-duty tie rod kit is engineered for enthusiasts seeking a robust steering component upgrade for their Ford Bronco rather than a standard replacement part.\u003cbr\u003eDesigned for the 2021, 2022, 2023, 2024, 2025, 2026, and 2027 Ford Bronco, the Fabtech Heavy-Duty Tie Rod Kit offers application-specific compatibility and straightforward integration with the vehicle’s suspension system. Professional installation is recommended to ensure proper assembly, steering alignment, and safe operation. This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHeavy-duty upgrade: Provides a stronger alternative to a standard replacement tie rod end.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific fitment: Designed for 2021-2027 Ford Bronco models.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOff-road focused design: Developed for demanding terrain and increased suspension loads.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech engineering: Backed by more than 20 years of aftermarket suspension design experience.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTested performance: Supported by extensive research, advanced design technology, and rigorous product testing.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProfessional installation recommended: Proper assembly and alignment help ensure safe, dependable operation.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22350\u003cbr\u003e\nPart Number: FTS22350\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026\u003cbr\u003e\nFord Bronco  2027","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772169945197,"sku":"FTS22350","price":339.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts22350-beauty.jpg?v=1792236565"},{"product_id":"fabtech-fts22345-track-bar-bracket-for-2021-2027-ford-bronco","title":"Fabtech FTS22345 Track Bar Bracket for 2021-2027 Ford Bronco","description":"\u003cp\u003eUpgrade the suspension geometry of your 2021-2027 Ford Bronco with the Fabtech FTS22345 Track Bar Bracket. Designed for off-road suspension applications, this bracket supports proper track bar positioning and helps maintain dependable suspension performance. Fabtech draws on more than 20 years of aftermarket suspension development experience to engineer components for strength, fitment, and reliable operation in demanding driving conditions.\u003cbr\u003eFabtech uses advanced design software, modern fabrication equipment, and rigorous testing to develop suspension products that meet the needs of serious off-road enthusiasts. The FTS22345 reflects the brand’s focus on precise engineering and durable construction, helping provide a quality, trouble-free installation when paired with a compatible suspension setup. Mounting hardware is included to simplify installation and support a secure fit.\u003cbr\u003eThis Fabtech track bar bracket is designed to fit 2021, 2022, 2023, 2024, 2025, 2026, and 2027 Ford Bronco models. Verify vehicle compatibility and suspension configuration before ordering. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS22345\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Track bar bracket\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2021-2027 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Hardware: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Engineered for aftermarket off-road suspension applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDevelopment: Designed and tested using advanced engineering and fabrication processes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22345\u003cbr\u003e\nPart Number: FTS22345\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026\u003cbr\u003e\nFord Bronco  2027","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772170829933,"sku":"FTS22345","price":127.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts22345-beauty.jpg?v=1792236593"},{"product_id":"fabtech-fts22337-performance-upper-control-arm-with-ball-joint-for-2021-2026-ford-bronco","title":"Fabtech FTS22337 Performance Upper Control Arm with Ball Joint for 2021-2026 Ford Bronco","description":"The Fabtech upper control arms feature low maintenance ball joints.\n\u003cp\u003eUpgrade the front suspension of your Ford Bronco with the Fabtech FTS22337 performance upper control arm. Designed for dependable operation and improved suspension performance, this tubular steel control arm is a durable replacement for the factory component. It is engineered to support the suspension system while maintaining reliable alignment and handling characteristics on both street-driven and off-road vehicles.\u003cbr\u003eThe Fabtech FTS22337 includes a bolt-in ball joint and bushings for a complete installation solution. The included components help simplify replacement and reduce the need to reuse worn factory hardware. Its performance-grade construction is built to withstand the demands of active suspension use, making it a practical choice for Bronco owners seeking durable suspension upgrades or replacement parts.\u003cbr\u003eThis upper control arm is compatible with 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. Verify vehicle application and suspension configuration before ordering to ensure proper fitment. Professional installation is recommended, and alignment should be checked after installation. This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, visit www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS22337\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2021-2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eControl Arm Construction: Tubular\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Steel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGrade Type: Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Grade Type: Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBall Joint Included: Yes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBall Joint Mounting Type: Bolt-in\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBushings Included: Yes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov\u003cbr\u003e\nBall Joint Included: Yes\u003cbr\u003e\nBall Joint Mounting Type: Bolt In\u003cbr\u003e\nBushings Included: Yes\u003cbr\u003e\nControl Arm Construction: Tubular\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nMaterial: Steel\u003cbr\u003e\nSuspension Grade Type: Performance\u003cbr\u003e\nAaiaid Part Number: BKBNFTS22337\u003cbr\u003e\nPart Number: FTS22337\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772173058157,"sku":"FTS22337","price":674.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS22337_LIFE.jpg?v=1792236661"},{"product_id":"fabtech-ftl5212-1-5-inch-front-leveling-kit-for-2021-2026-ford-bronco-4wd","title":"Fabtech FTL5212 1.5-Inch Front Leveling Kit for 2021-2026 Ford Bronco 4WD","description":"Leveling System\n\u003cp\u003eUpgrade the stance and tire clearance of your 2021-2026 Ford Bronco 4WD with the Fabtech FTL5212 Front Leveling Kit. This suspension leveling system uses CNC-machined aluminum front billet spacers that install on top of the factory coilover assemblies, adding front lift while preserving the Bronco’s compliant factory ride. The design helps reduce the front-end rake and provides additional clearance for oversized tires without requiring replacement coilovers or a complete suspension overhaul.\u003cbr\u003eFabtech engineers designed the FTL5212 spacers to provide the maximum practical lift height without creating ball-joint or tie-rod binding as the suspension cycles through its full range of travel. The spacers bolt in without disassembling the factory coilover shocks, helping streamline installation and minimize installation time. High-grade hardware is included for dependable installation, and the system is engineered specifically for compatible Ford Bronco 4WD applications from 2021 through 2026.\u003cbr\u003eAs part of Fabtech’s exclusive Trade Up program, this leveling kit can help provide a path toward a complete Fabtech lift system. If you later decide to upgrade, you may be able to trade in the previously purchased leveling kit toward a new Fabtech system, subject to Fabtech program terms and eligibility requirements. The Fabtech FTL5212 is a practical solution for improving front-end appearance, supporting larger tire fitment, and maintaining a smooth, controlled ride.\u003cbr\u003eThis product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.5-inch front leveling lift helps reduce factory rake and improve vehicle stance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCNC-machined aluminum billet spacers provide durable, precise construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstalls on top of the factory coilover assemblies without coilover disassembly\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineered to help prevent ball-joint and tie-rod bind through the suspension travel range\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRetains the factory coilover assemblies and compliant factory ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides additional front clearance for oversized tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes high-grade installation hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2021-2026 Ford Bronco 4WD models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEligible for Fabtech Trade Up program participation subject to program terms\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLift\/Drop Height: 1.5\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTL5212\u003cbr\u003e\nPart Number: FTL5212\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772318220397,"sku":"FTL5212","price":158.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/ftl5212-beauty.jpg?v=1792239339"}],"url":"https:\/\/truckarmy.com\/collections\/suspension-for-2025-ford-bronco.oembed?page=2","provider":"Truck Army","version":"1.0","type":"link"}