{"title":"Suspension","description":"Lift it, level it, and get it ready for any mission. Lift kits, leveling kits, shocks, and steering upgrades for trucks, Jeeps, and SUVs.","products":[{"product_id":"bilstein-b8-5100-leveling-kit-53-350541-for-2024-2026-jeep-gladiator","title":"Bilstein B8 5100 Leveling Kit 53-350541 for 2024-2026 Jeep Gladiator","description":"B8 5100 Leveling Kit - Suspension Leveling Kit\n\u003cp\u003eUpgrade your Jeep Gladiator with the Bilstein B8 5100 Leveling Kit, part number 53-350541. Designed for 2024, 2025, and 2026 Jeep Gladiator models, this suspension leveling kit adds front-end clearance, supports larger tires, and improves wheel travel and articulation. It is engineered for drivers who want enhanced off-road capability while maintaining a smooth, stable ride on the street.\u003cbr\u003eThe Bilstein B8 5100 kit combines four B8 5100 shock absorbers with two custom-matched, longer-travel, cold-wound front coil springs. Supporting components and required hardware are included for a complete installation. The components are designed to bolt into the factory mounting locations, helping simplify installation without requiring extensive suspension modifications.\u003cbr\u003eWith the Bilstein B8 5100 Leveling Kit installed, compatible Gladiator applications can run 35-inch tires with stock fenders, depending on wheel and tire specifications. The increased suspension travel helps the front axle maintain improved contact with uneven terrain, while Bilstein shock technology promotes controlled handling and dependable damping both on and off the road. This kit is a practical solution for improving the stance, clearance, and overall suspension performance of your Jeep.\u003cbr\u003eThe Bilstein B8 5100 Leveling Kit is part of Bilstein’s performance-focused suspension lineup for light trucks and SUVs. Professional installation is recommended, and alignment should be checked after installation. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Fits 2024, 2025, and 2026 Jeep Gladiator models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Series: Bilstein B8 5100 Leveling Kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Includes four B8 5100 shock absorbers, two matched front coil springs, supporting components, and installation hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGround Clearance: Increases front-end clearance for improved off-road capability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Compatibility: Allows compatible Gladiator applications to run 35-inch tires with stock fenders\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Performance: Improves wheel travel and articulation for enhanced terrain control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Designed to bolt into factory mounting locations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Performance suspension leveling kit for light trucks and off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nSeries: B8 5100 Leveling Kit\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nAaiaid Part Number: BBGL53-350541\u003cbr\u003e\nPart Number: 53-350541\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Gladiator  2024\u003cbr\u003e\nJeep Gladiator  2025\u003cbr\u003e\nJeep Gladiator  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67740888858733,"sku":"53350541","price":756.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/53-350541_1.jpg?v=1792024845"},{"product_id":"bilstein-b8-5100-leveling-kit-53-350534-for-2020-2023-jeep-gladiator","title":"Bilstein B8 5100 Leveling Kit 53-350534 for 2020-2023 Jeep Gladiator","description":"B8 5100 Leveling Kit - Suspension Leveling Kit\n\u003cp\u003eThe Bilstein B8 5100 Leveling Kit, part number 53-350534, is a high-performance suspension upgrade designed for 2020-2023 Jeep Gladiator models. This complete kit improves front-end stance, increases ground clearance, and provides additional wheel travel and articulation for enhanced capability on and off the road. It is engineered for drivers who want the benefits of larger tires while maintaining a smooth, stable ride and dependable suspension performance.\u003cbr\u003eThe kit includes four Bilstein B8 5100 shock absorbers, two custom-matched longer-travel cold-wound front coil springs, and the supporting components and hardware required for installation. The shocks are tuned to work with the included springs, helping provide controlled damping, improved handling, and consistent ride quality across changing terrain. With the appropriate setup, the kit allows the Gladiator to run up to 35-inch tires with stock fenders, helping maximize traction and ground clearance without requiring extensive suspension modifications.\u003cbr\u003eDesigned to bolt into the factory suspension locations, the Bilstein B8 5100 Leveling Kit offers a straightforward upgrade for Jeep Gladiator owners seeking increased capability and a more balanced appearance. Its durable components are built for light-truck applications and are suitable for daily driving, trail use, and off-road adventures. Verify vehicle compatibility and supporting modifications before installation. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDesigned for 2020-2023 Jeep Gladiator models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes four Bilstein B8 5100 shock absorbers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes two custom-matched longer-travel front coil springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncreases front suspension wheel travel and articulation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides additional ground clearance for off-road use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAllows installation of up to 35-inch tires with stock fenders\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolts into factory suspension locations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDelivers a smooth and stable ride on and off the road\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBuilt for light-truck suspension applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number: 53-350534\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nSeries: B8 5100 Leveling Kit\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAaiaid Part Number: BBGL53-350534\u003cbr\u003e\nPart Number: 53-350534\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Gladiator  2020\u003cbr\u003e\nJeep Gladiator  2021\u003cbr\u003e\nJeep Gladiator  2022\u003cbr\u003e\nJeep Gladiator  2023","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771198603373,"sku":"53350534","price":756.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/53-350534_1.jpg?v=1792219286"},{"product_id":"bilstein-b8-5100-lift-kit-suspension-kit-53-350527-for-jeep-wrangler-jl","title":"Bilstein B8 5100 Lift Kit Suspension Kit 53-350527 for Jeep Wrangler JL","description":"B8 5100 Lift Kit - Suspension Lift Kit\n\u003cp\u003eUpgrade your Jeep Wrangler JL suspension with the Bilstein B8 5100 Lift Kit, part number 53-350527. Designed for solid-axle Jeep Wrangler JL models, this high-performance suspension kit provides additional ground clearance, increased wheel travel, and improved articulation on all four corners. The kit helps accommodate larger tires while maintaining a balanced, factory-inspired appearance and dependable ride quality on both paved roads and challenging trails.\u003cbr\u003eThe Bilstein B8 5100 Lift Kit includes four B8 5100 shock absorbers, four custom-matched longer-travel cold-wound coil springs, and the supporting components and hardware needed for installation. Components are engineered to bolt into the factory mounting locations, simplifying installation without requiring additional suspension-geometry correction parts commonly associated with other lift kits. This setup allows Wrangler JL Rubicon models to run tires up to 35 inches, while non-Rubicon models with stock fenders can run tires up to 33 inches, depending on wheel and tire specifications.\u003cbr\u003eBilstein designed the B8 5100 Lift Kit to optimize the Jeep Wrangler JL suspension as delivered from the factory. The matched shocks and springs provide controlled suspension movement, improved stability, and a smooth, composed ride both on-road and off-road. The result is a practical suspension upgrade that delivers the benefits of larger tires and increased clearance without creating an excessive wheel gap. This kit fits 2024, 2025, and 2026 Jeep Wrangler applications. Professional installation is recommended, and vehicle-specific tire, wheel, and clearance requirements should be confirmed before installation. This product carries a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2024, 2025, and 2026 Jeep Wrangler JL models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Includes four B8 5100 shock absorbers, four custom-matched longer-travel coil springs, and supporting installation components and hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Performance: Increases ground clearance, wheel travel, and suspension articulation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Compatibility: Supports up to 35-inch tires on Wrangler JL Rubicon models and up to 33-inch tires on non-Rubicon models with stock fenders\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Bolts into factory suspension mounting locations without requiring additional suspension-geometry correction components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Quality: Provides controlled handling and a smooth, stable ride on-road and off-road\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Uses custom-matched, cold-wound coil springs and Bilstein B8 5100 performance shock absorbers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies for cancer and reproductive harm\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nSeries: B8 5100 Lift Kit\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nAaiaid Part Number: BBGL53-350527\u003cbr\u003e\nPart Number: 53-350527\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Wrangler  2024\u003cbr\u003e\nJeep Wrangler  2025\u003cbr\u003e\nJeep Wrangler  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771198701677,"sku":"53350527","price":1084.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/53-291431_7.jpg?v=1792219305"},{"product_id":"bilstein-b8-5100-lift-kit-53-350510-for-2024-2026-jeep-wrangler-jl","title":"Bilstein B8 5100 Lift Kit 53-350510 for 2024-2026 Jeep Wrangler JL","description":"B8 5100 Lift Kit - Suspension Lift Kit\n\u003cp\u003eUpgrade your 2024-2026 Jeep Wrangler JL with the Bilstein B8 5100 Lift Kit, part number 53-350510. Designed for solid-axle applications, this complete suspension lift kit increases ground clearance, supports larger tires, and improves wheel travel and articulation on all four corners. The kit combines four Bilstein B8 5100 shock absorbers with four custom-matched, longer-travel cold-wound coil springs, along with the supporting components and hardware needed for installation.\u003cbr\u003eThe Bilstein B8 5100 Lift Kit is engineered to bolt into the factory suspension locations, helping simplify installation while maintaining a balanced, controlled ride. Wrangler JL Rubicon models can accommodate up to 35-inch tires, while non-Rubicon models with stock fenders can accommodate up to 33-inch tires, subject to wheel and tire specifications. By optimizing the factory suspension design, this kit provides increased ride height without requiring additional components to correct suspension geometry in typical applications.\u003cbr\u003eOn the road, the Bilstein B8 5100 shock absorbers deliver smooth, stable damping and confident handling. Off-road, the longer-travel springs and shocks help maintain tire contact and suspension control over uneven terrain. The result is a practical suspension upgrade that delivers the benefits of larger tires and added clearance without creating excessive wheel gap. This Bilstein suspension kit is designed for light-truck use and is a complete solution for Jeep Wrangler JL owners seeking improved capability and dependable performance.\u003cbr\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2024-2026 Jeep Wrangler JL models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Includes four Bilstein B8 5100 shock absorbers, four custom-matched cold-wound coil springs, supporting components, and installation hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Performance: Increases ground clearance and supports larger tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Travel: Provides longer travel and improved wheel articulation on all four corners\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTire Fitment: Allows Rubicon models to run up to 35-inch tires and non-Rubicon models with stock fenders to run up to 33-inch tires, depending on wheel and tire specifications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Designed to bolt into factory suspension locations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Quality: Delivers smooth, stable damping for on-road and off-road driving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 53-350510\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nSeries: B8 5100 Lift Kit\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nAaiaid Part Number: BBGL53-350510\u003cbr\u003e\nPart Number: 53-350510\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Wrangler  2024\u003cbr\u003e\nJeep Wrangler  2025\u003cbr\u003e\nJeep Wrangler  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771198865517,"sku":"53350510","price":1084.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/53-291417_1.jpg?v=1792219326"},{"product_id":"bilstein-b12-special-coil-spring-set-53-333377-for-2024-2026-toyota-tacoma","title":"Bilstein B12 (Special) Coil Spring Set 53-333377 for 2024-2026 Toyota Tacoma","description":"B12 (Special) - Coil Spring Set\n\u003cp\u003eUpgrade the suspension performance of your 2024, 2025, or 2026 Toyota Tacoma with the Bilstein B12 (Special) coil spring set, part number 53-333377. Designed for light-truck applications, this suspension component helps alter ride height to meet specific performance requirements while supporting improved suspension dynamics, quality, and appearance. Bilstein engineering delivers a carefully developed balance between handling characteristics and everyday usability.\u003cbr\u003eThe B12 (Special) kit includes a pair of black coil springs featuring a progressive rear spring design and a rear main spring rate of 250 pounds per inch. Progressive spring construction provides a controlled response across changing load and road conditions, helping the suspension remain composed during normal driving while offering additional support when conditions demand it. This set is intended for drivers seeking a purposeful suspension upgrade without sacrificing the refined fit and function expected from Bilstein.\u003cbr\u003eBuilt for direct vehicle-specific application, this Bilstein coil spring set is engineered for compatibility with the listed Toyota Tacoma model years. The kit contents include two coil springs for the rear suspension, making it a practical choice for replacing worn components or completing a coordinated suspension installation. Verify vehicle configuration and application details before ordering to ensure proper fitment.\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This product may expose you to chemicals including substances identified by California Proposition 65 as causing cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B12 (Special)\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 53-333377\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2024-2026 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Type: Rear coil spring set\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Pair of coil springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Design: Progressive rear main spring type\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Main Spring Rate: 250 pounds per inch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Black\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Segment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFinish: Springs: Black\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nSeries: B12 (Special)\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 250\u003cbr\u003e\nRear Main Spring Type: Progressive\u003cbr\u003e\nParttype: Coil Spring Set\u003cbr\u003e\nKit Contents: Pair of coil springs\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BBGL53-333377\u003cbr\u003e\nPart Number: 53-333377\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  2024\u003cbr\u003e\nToyota Tacoma  2025\u003cbr\u003e\nToyota Tacoma  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771199062125,"sku":"53333377","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02.jpg?v=1792219343"},{"product_id":"bilstein-b12-special-coil-spring-set-53-332837-for-toyota-4runner-fj-cruiser-and-lexus-gx460","title":"Bilstein B12 (Special) Coil Spring Set 53-332837 for Toyota 4Runner, FJ Cruiser and Lexus GX460","description":"B12 (Special) - Coil Spring Set\n\u003cp\u003eUpgrade your light truck or SUV suspension with the Bilstein B12 (Special) coil spring set, part number 53-332837. Designed to modify ride height for improved performance, this suspension kit delivers a balanced combination of suspension dynamics, quality, and refined appearance. It is engineered for drivers seeking dependable spring performance and a purposeful suspension upgrade for select Toyota and Lexus applications.\u003cbr\u003eThe kit includes a pair of black linear-rate coil springs, a pair of bump stop extension washers, and supporting components for installation. The front springs feature a 700 lb\/in spring rate to provide controlled support and consistent suspension response. Bilstein’s B12 (Special) design helps optimize ride height for specific vehicle requirements while maintaining the durability expected from a premium suspension component.\u003cbr\u003eThis Bilstein coil spring set fits select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications. Verify vehicle configuration and application details before ordering to ensure proper fitment. Professional installation is recommended, and alignment should be checked after suspension work. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 53-332837\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B12 (Special)\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Type: Coil spring set\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select Toyota FJ Cruiser, Toyota 4Runner, and Lexus GX460 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Finish: Black\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Spring Rate: 700 lb\/in\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Spring Type: Linear\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Pair of coil springs and pair of bump stop extension washers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Segment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFinish: Springs: Black\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nSeries: B12 (Special)\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 700\u003cbr\u003e\nFront Main Spring Type: Linear\u003cbr\u003e\nParttype: Coil Spring Set\u003cbr\u003e\nKit Contents: Pair of coil springs, pair of bump stop extension washers\u003cbr\u003e\nAaiaid Part Number: BBGL53-332837\u003cbr\u003e\nPart Number: 53-332837\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014\u003cbr\u003e\nToyota Tacoma  2016\u003cbr\u003e\nToyota Tacoma  2017\u003cbr\u003e\nToyota Tacoma  2018\u003cbr\u003e\nToyota Tacoma  2019\u003cbr\u003e\nToyota Tacoma  2020\u003cbr\u003e\nToyota Tacoma  2021\u003cbr\u003e\nToyota Tacoma  2022\u003cbr\u003e\nToyota Tacoma  2023","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771202044013,"sku":"53332837","price":258.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/53-332837_1.jpg?v=1792219355"},{"product_id":"bilstein-b12-special-progressive-rear-coil-spring-set-53-329257-for-toyota-tundra","title":"Bilstein B12 (Special) Progressive Rear Coil Spring Set 53-329257 for Toyota Tundra","description":"B12 (Special) - Coil Spring Set\n\u003cp\u003eUpgrade the rear suspension of your Toyota Tundra with the Bilstein B12 (Special) Coil Spring Set, part number 53-329257. Designed for light-truck applications, this suspension component helps alter ride height to support improved performance, handling, and overall vehicle appearance. The B12 (Special) series combines suspension dynamics, quality construction, and a performance-focused design for drivers seeking a refined suspension setup.\u003cbr\u003eThe Bilstein 53-329257 kit includes a pair of rear coil springs finished in black. Each spring uses a progressive spring design with a rear main spring rate of 251 pounds per inch, helping provide balanced suspension response across varying load and road conditions. Progressive-rate springs are engineered to offer a comfortable initial response while increasing resistance as suspension compression rises, supporting improved control during demanding driving situations.\u003cbr\u003eBuilt for select 2022-2026 Toyota Tundra models, this Bilstein B12 (Special) coil spring set is intended to provide a practical suspension upgrade without sacrificing everyday usability. Verify vehicle application and suspension compatibility before installation. This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B12 (Special) suspension series designed to optimize vehicle ride height and suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 53-329257\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits select 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Type: Rear coil spring set\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Pair of coil springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Design: Progressive rear main spring design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Rate: 251 pounds per inch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Black\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Segment: Light truck\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Combines suspension dynamics, quality, and aesthetics\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFinish: Springs: Black\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nSeries: B12 (Special)\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 251\u003cbr\u003e\nRear Main Spring Type: Progressive\u003cbr\u003e\nParttype: Coil Spring Set\u003cbr\u003e\nKit Contents: Pair of coil springs\u003cbr\u003e\nAaiaid Part Number: BBGL53-329257\u003cbr\u003e\nPart Number: 53-329257\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771202142317,"sku":"53329257","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/53-329257_2.jpg?v=1792219373"},{"product_id":"bilstein-b8-5100-dual-steering-damper-kit-53-264817-for-ram-2500-and-3500","title":"Bilstein B8 5100 Dual Steering Damper Kit 53-264817 for Ram 2500 and 3500","description":"B8 5100 (Dual Steering Damper Kit) - Steering Damper Kit\n\u003cp\u003eThe Bilstein B8 5100 Dual Steering Damper Kit, part number 53-264817, is a bolt-on steering stabilizer solution for select solid-axle 4WD Ram trucks. Designed for improved steering control, this kit includes two opposing steering dampers that mount inline to enhance steering isolation, feedback, and on-center feel. It is engineered to help reduce steering vibrations and minimize steering wheel shake caused by road impacts and suspension movement.\u003cbr\u003eEach Bilstein B8 5100 steering damper uses a gas-pressurized monotube design with a smooth-body construction. The dampers are fully functional in a horizontal mounting position and provide controlled resistance during even subtle steering movements. This design helps improve handling confidence while maintaining responsive steering characteristics on light trucks and heavy-duty 4WD applications.\u003cbr\u003eThe dampers feature eye-style upper and lower mounts for installation on compatible factory or aftermarket mounting hardware. Zinc-plated finishes provide a durable exterior suited to demanding underbody environments, while the non-coilover body design supports straightforward installation. No external reservoir or protective boot is included. This dual stabilizer kit is intended for select 2013–2018 Ram 2500 and 3500 applications; verify vehicle fitment and mounting configuration before ordering.\u003cbr\u003eCompatible applications include the 2013 Ram 3500; 2014–2016 Ram 2500 and 3500; 2017 Ram 2500 and 3500; and 2018 Ram 2500. Professional installation or inspection is recommended to confirm proper alignment, mounting condition, and steering system compatibility. California Proposition 65 Warning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDual steering damper kit for improved steering isolation and control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series gas-pressurized monotube design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOpposing inline mounting improves on-center steering feel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHelps reduce steering vibrations and steering wheel shake\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction for light truck applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish for durable underbody protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFully functional in horizontal mounting positions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e36 mm piston and 11 mm shaft design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir or protective boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nPiston Diameter: 36mm\u003cbr\u003e\nLower Mount Type: Eye\u003cbr\u003e\nUpper Mount Type: Eye\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nSeries: B8 5100 (Dual Steering Damper Kit)\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nShaft Diameter: 11mm\u003cbr\u003e\nParttype: Steering Stabilizer Kit\u003cbr\u003e\nAaiaid Part Number: BBGL53-264817\u003cbr\u003e\nPart Number: 53-264817\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nRam 2500  2014\u003cbr\u003e\nRam 2500  2015\u003cbr\u003e\nRam 2500  2016\u003cbr\u003e\nRam 2500  2017\u003cbr\u003e\nRam 2500  2018\u003cbr\u003e\nRam 2500  2019\u003cbr\u003e\nRam 2500  2020\u003cbr\u003e\nRam 2500  2021\u003cbr\u003e\nRam 2500  2022\u003cbr\u003e\nRam 2500  2023\u003cbr\u003e\nRam 2500  2024\u003cbr\u003e\nRam 2500  2025\u003cbr\u003e\nRam 2500  2026\u003cbr\u003e\nRam 3500  2013\u003cbr\u003e\nRam 3500  2014\u003cbr\u003e\nRam 3500  2015\u003cbr\u003e\nRam 3500  2016\u003cbr\u003e\nRam 3500  2017\u003cbr\u003e\nRam 3500  2018\u003cbr\u003e\nRam 3500  2019\u003cbr\u003e\nRam 3500  2020\u003cbr\u003e\nRam 3500  2021\u003cbr\u003e\nRam 3500  2022\u003cbr\u003e\nRam 3500  2023\u003cbr\u003e\nRam 3500  2024\u003cbr\u003e\nRam 3500  2025\u003cbr\u003e\nRam 3500  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771202306157,"sku":"53264817","price":294.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/53-264817_1.jpg?v=1792219393"},{"product_id":"bilstein-b8-control-arms-upper-control-arm-kit-51-304669-for-2012-2016-chevrolet-silverado-and-gmc-sierra-1500","title":"Bilstein B8 Control Arms Upper Control Arm Kit 51-304669 for 2012-2016 Chevrolet Silverado and GMC Sierra 1500","description":"B8 Control Arms - Upper Control Arm Kit\n\u003cp\u003eUpgrade the front suspension of your lifted truck with the Bilstein B8 Control Arms Upper Control Arm Kit, part number 51-304669. Designed as a direct-fit replacement for factory upper control arms, this kit helps correct caster alignment to improve straight-line stability and steering behavior on lifted Chevrolet Silverado and GMC Sierra 1500 models. The kit includes a matched pair of upper control arms with ball joints, mounting hardware, bushings, grease fittings, and installation instructions.\u003cbr\u003eEach Bilstein B8 Control Arm is built from strong 4130 chromoly tubing with a black powder-coated finish for durability and corrosion resistance. The tubular design provides additional clearance around springs and shocks, while optimized pivot angles increase wheel travel and help reduce stress on suspension joints. Greasable black Delrin inner bushings and greasable sealed heavy-duty outer ball joints provide a durable combination of controlled suspension movement, ride quality, and serviceability.\u003cbr\u003eThe Bilstein 51-304669 control arm kit is compatible with Bilstein shocks and coilover systems and is engineered for light-truck applications. All components are replaceable, helping support long-term maintenance and service. This upper control arm kit fits select 2012 through 2016 Chevrolet Silverado 1500 and GMC Sierra 1500 applications; verify vehicle fitment before ordering. Professional installation is recommended when suspension components are replaced or used with a lifted suspension.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upper control arm upgrade for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCorrects caster alignment for improved straight-line stability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTubular 4130 chromoly steel arm construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack powder-coated finish for durable corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGreasable black Delrin inner pivot bushings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGreasable sealed heavy-duty ball joints\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTubular design improves spring and shock clearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptimized pivot angles increase wheel travel and reduce joint stress\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes a pair of upper control arms, ball joints, mounting hardware, bushings, grease fittings, and instructions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with Bilstein shocks and coilover kits\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReplaceable components support long-term serviceability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2012-2016 Chevrolet Silverado 1500 and GMC Sierra 1500 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Powder-Coated Black\u003cbr\u003e\nArm Inner Pivot Type: Greasable Black Delrin Bushings\u003cbr\u003e\nArm Material: 4130 Chromoly Tubing\u003cbr\u003e\nArm Outer Pivot Type: Greasable Sealed Ball Joint\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nArm Design: Tubular\u003cbr\u003e\nParttype: Control Arm Kit\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSeries: B8 Control Arms\u003cbr\u003e\nKit Contents: Pair of upper control arms with ball joints, mounting hardware, bushings, grease fittings, instructions\u003cbr\u003e\nAaiaid Part Number: BBGL51-304669\u003cbr\u003e\nPart Number: 51-304669\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Silverado 1500  2007\u003cbr\u003e\nChevrolet Silverado 1500  2008\u003cbr\u003e\nChevrolet Silverado 1500  2009\u003cbr\u003e\nChevrolet Silverado 1500  2010\u003cbr\u003e\nChevrolet Silverado 1500  2011\u003cbr\u003e\nChevrolet Silverado 1500  2012\u003cbr\u003e\nChevrolet Silverado 1500  2013\u003cbr\u003e\nChevrolet Silverado 1500  2014\u003cbr\u003e\nChevrolet Silverado 1500  2015\u003cbr\u003e\nChevrolet Silverado 1500  2016\u003cbr\u003e\nGMC Sierra 1500  2007\u003cbr\u003e\nGMC Sierra 1500  2008\u003cbr\u003e\nGMC Sierra 1500  2009\u003cbr\u003e\nGMC Sierra 1500  2010\u003cbr\u003e\nGMC Sierra 1500  2011\u003cbr\u003e\nGMC Sierra 1500  2012\u003cbr\u003e\nGMC Sierra 1500  2013\u003cbr\u003e\nGMC Sierra 1500  2014\u003cbr\u003e\nGMC Sierra 1500  2015\u003cbr\u003e\nGMC Sierra 1500  2016","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771203125357,"sku":"51304669","price":741.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/51-304669_3.jpg?v=1792219412"},{"product_id":"bilstein-b8-6112-suspension-kit-47-314009-for-2021-2026-ford-bronco","title":"Bilstein B8 6112 Suspension Kit 47-314009 for 2021-2026 Ford Bronco","description":"B8 6112 - Suspension Kit\n\u003cp\u003eUpgrade your 2021-2026 Ford Bronco with the Bilstein B8 6112 Suspension Kit, part number 47-314009. Designed for light trucks and SUVs, this direct-fit kit increases ground clearance, supports larger tires, and improves wheel travel for enhanced on-road control and off-road capability. The vehicle-specific tuning delivers balanced performance while maintaining dependable ride quality across varied terrain.\u003cbr\u003eThe kit includes two 60mm Bilstein monotube shock absorbers, two custom-matched cold-wound coil springs, and two billet aluminum spring seats. Multiple snap-ring grooves in the shock body allow the spring seat position to be adjusted for up to 2.75 inches of front lift, depending on the application. This adjustable configuration gives you flexibility when setting up your Bronco for clearance, stance, and trail performance.\u003cbr\u003eEach shock features a large 2.65-inch outside diameter body, an 18mm shaft, and a 60mm digressive piston that provides precise damping control without requiring external reservoirs or damping adjustments. The snap-ring grooved coilover body, zinc-plated dampers, and black springs are engineered for durability in demanding driving conditions. Bilstein B8 6112 performance helps provide confident handling, improved suspension response, and reliable support for both daily driving and off-road use.\u003cbr\u003eFitment: 2021 Ford Bronco, 2022 Ford Bronco, 2023 Ford Bronco, 2024 Ford Bronco, 2025 Ford Bronco, and 2026 Ford Bronco. This kit is designed for the front suspension and includes spring seats for installation. Professional installation is recommended to ensure proper setup and alignment. This product contains a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for 2021-2026 Ford Bronco applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Type: Complete front suspension kit with two shock absorbers, two coil springs, and two billet aluminum spring seats.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Adjustment: Multiple snap-ring grooves provide up to 2.75 inches of front lift, depending on application.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Design: Bilstein B8 6112 monotube shocks with a 60mm digressive piston and large 2.65-inch body.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable damping with vehicle-specific tuning for balanced on-road and off-road performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoilover Body: Snap-ring grooved body allows adjustable spring seat positioning.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Zinc-plated dampers, black cold-wound springs, and an 18mm shock shaft.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Non-reservoir design for a direct-fit installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: Provides 8.45 inches of shock travel, with a 17.11-inch collapsed length and 25.56-inch extended length.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nCollapsed Length (In): 17.11\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nStroke\/Travel Length (In): 8.45\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (In): 25.56\u003cbr\u003e\nStroke\/Travel Length (Mm): 214.7\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nSeries: B8 6112\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 288\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nCollapsed Length (Mm): 434.6\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 649.3\u003cbr\u003e\nAaiaid Part Number: BBGL47-314009\u003cbr\u003e\nPart Number: 47-314009\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771203453037,"sku":"47314009","price":923.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/47-314009_1.jpg?v=1792219431"},{"product_id":"bilstein-b8-6112-suspension-kit-47-310896-for-1996-2004-toyota-tacoma","title":"Bilstein B8 6112 Suspension Kit 47-310896 for 1996-2004 Toyota Tacoma","description":"B8 6112 - Suspension Kit\n\u003cp\u003eUpgrade your Toyota Tacoma with the Bilstein B8 6112 Suspension Kit, part number 47-310896. Designed for light-truck applications, this direct-fit leveling system helps provide additional ground clearance, accommodate larger tires, and increase wheel travel. The kit is engineered for the 1996-2004 Toyota Tacoma and includes two 60mm monotube shock absorbers, two custom-matched cold-wound coil springs, and two billet aluminum spring seats for a complete front suspension solution.\u003cbr\u003eThe snap-ring grooved coilover bodies provide multiple spring seat positions, allowing adjustable front lift from 0 to 2.75 inches, depending on vehicle application and setup. A 2.65-inch outside-diameter body and 60mm digressive piston deliver improved damping control across changing terrain, supporting confident handling both on the road and off-road. The included springs feature a 450 lb\/in front main spring rate, while the zinc-plated dampers and black springs provide durable finishes suited to demanding driving conditions.\u003cbr\u003eWith an 18mm shaft, 4.98 inches of shock travel, and no external reservoir, the Bilstein B8 6112 kit offers a practical combination of controlled suspension performance and straightforward installation. Spring seats are included, while protective boots are not. This suspension kit is designed for the 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, and 2004 Toyota Tacoma. It carries a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for 1996-2004 Toyota Tacoma applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Type: Complete front suspension kit with two shocks, two coil springs, and two billet aluminum spring seats\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Range: Adjustable front lift from 0 to 2.75 inches, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Design: 60mm monotube dampers with digressive pistons for controlled on-road and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring grooved coilover body with multiple spring seat positions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Rate: 450 lb\/in front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Travel: 4.98 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 18mm shock shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc-plated dampers with black coil springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Non-reservoir design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seats: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoots: Protective shock boots are not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length (In): 13.56\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nStroke\/Travel Length (In): 4.98\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (In): 18.54\u003cbr\u003e\nStroke\/Travel Length (Mm): 126.5\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nSeries: B8 6112\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nCollapsed Length (Mm): 344.5\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 450\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 471.0\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL47-310896\u003cbr\u003e\nPart Number: 47-310896\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  1996\u003cbr\u003e\nToyota Tacoma  1997\u003cbr\u003e\nToyota Tacoma  1998\u003cbr\u003e\nToyota Tacoma  1999\u003cbr\u003e\nToyota Tacoma  2000\u003cbr\u003e\nToyota Tacoma  2001\u003cbr\u003e\nToyota Tacoma  2002\u003cbr\u003e\nToyota Tacoma  2003\u003cbr\u003e\nToyota Tacoma  2004","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771204305005,"sku":"47310896","price":923.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/47-310896_1.jpg?v=1792219450"},{"product_id":"bilstein-b8-6112-suspension-kit-47-310834-for-select-chevrolet-silverado-tahoe-and-gmc-sierra-yukon","title":"Bilstein B8 6112 Suspension Kit 47-310834 for Select Chevrolet Silverado, Tahoe and GMC Sierra, Yukon","description":"B8 6112 - Suspension Kit\n\u003cp\u003eUpgrade the front suspension of your light truck or SUV with the Bilstein B8 6112 suspension kit, part number 47-310834. Designed for select 2014-2016 Chevrolet Silverado 1500, 2015-2016 Chevrolet Tahoe, 2014-2016 GMC Sierra 1500, and 2015-2016 GMC Yukon applications, this vehicle-specific kit combines matched components for improved ground clearance, larger-tire compatibility, and increased wheel travel. Bilstein engineering delivers reliable performance for both daily driving and off-road use.\u003cbr\u003eThe kit includes two 60mm monotube shock absorbers, two custom-matched cold-wound coil springs, and two billet aluminum spring seats. Multiple snap-ring grooves allow the spring seat position to be adjusted for approximately 0 to 2.75 inches of front lift, depending on the application. The large 2.65-inch outside diameter body and 60mm digressive piston provide increased damping control, helping maintain composure over uneven terrain while preserving confident on-road handling. The 750-pound-per-inch front spring rate is matched to the application for consistent suspension performance.\u003cbr\u003eBilstein B8 6112 dampers feature a snap-ring-grooved coilover body, zinc-plated damper finish, black springs, an 18mm shaft, and a 3.90-inch stroke. The spring seats are included, while boots and an external reservoir are not. The kit is built as a direct-fit suspension solution for compatible light trucks and SUVs, simplifying installation compared with assembling separate suspension components. Verify vehicle configuration and application-specific fitment before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle-specific front suspension kit for select Chevrolet Silverado 1500, Chevrolet Tahoe, GMC Sierra 1500, and GMC Yukon applications from 2014 through 2016\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes two 60mm monotube shock absorbers, two matched cold-wound coil springs, and two billet aluminum spring seats\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMultiple snap-ring grooves allow approximately 0 to 2.75 inches of adjustable front lift, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLarge 2.65-inch outside diameter body and 60mm digressive piston improve damping control for on-road and off-road driving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront main spring rate: 750 pounds per inch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock stroke: 3.90 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSnap-ring-grooved coilover body with zinc-plated dampers and black springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e18mm shaft diameter with included spring seats\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design for compatible light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir or protective boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nStroke\/Travel Length (In): 3.90\u003cbr\u003e\nExtended Length (In): 18.86\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 99.1\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nSeries: B8 6112\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (In): 14.96\u003cbr\u003e\nCollapsed Length (Mm): 380.0\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 750\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 479.1\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL47-310834\u003cbr\u003e\nPart Number: 47-310834\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Silverado 1500  2014\u003cbr\u003e\nChevrolet Silverado 1500  2015\u003cbr\u003e\nChevrolet Silverado 1500  2016\u003cbr\u003e\nChevrolet Silverado 1500  2017\u003cbr\u003e\nChevrolet Silverado 1500  2018\u003cbr\u003e\nChevrolet Silverado 1500 LD  2019\u003cbr\u003e\nChevrolet Tahoe  2015\u003cbr\u003e\nChevrolet Tahoe  2016\u003cbr\u003e\nChevrolet Tahoe  2017\u003cbr\u003e\nChevrolet Tahoe  2018\u003cbr\u003e\nChevrolet Tahoe  2019\u003cbr\u003e\nChevrolet Tahoe  2020\u003cbr\u003e\nGMC Sierra 1500  2014\u003cbr\u003e\nGMC Sierra 1500  2015\u003cbr\u003e\nGMC Sierra 1500  2016\u003cbr\u003e\nGMC Sierra 1500  2017\u003cbr\u003e\nGMC Sierra 1500  2018\u003cbr\u003e\nGMC Sierra 1500 Limited  2019\u003cbr\u003e\nGMC Yukon  2015\u003cbr\u003e\nGMC Yukon  2016\u003cbr\u003e\nGMC Yukon  2017\u003cbr\u003e\nGMC Yukon  2018\u003cbr\u003e\nGMC Yukon  2019\u003cbr\u003e\nGMC Yukon  2020","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771205058669,"sku":"47310834","price":923.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/47-310834_1.jpg?v=1792219476"},{"product_id":"bilstein-b8-6112-suspension-kit-47-310025-for-select-toyota-4runner-fj-cruiser-and-lexus-gx460","title":"Bilstein B8 6112 Suspension Kit 47-310025 for Select Toyota 4Runner, FJ Cruiser and Lexus GX460","description":"B8 6112 - Suspension Kit\n\u003cp\u003eUpgrade the suspension performance and ground clearance of your light truck or SUV with the Bilstein B8 6112 suspension kit, part number 47-310025. This direct-fit leveling system is engineered for select 2011–2014 Toyota 4Runner and FJ Cruiser models, along with select 2012–2014 Lexus GX460 applications. The kit combines vehicle-specific tuning with matched components to deliver improved control, increased wheel travel, and clearance for larger tires while maintaining confident on-road handling and off-road capability.\u003cbr\u003eThe Bilstein B8 6112 kit includes two 60mm monotube shock absorbers, two custom-matched cold-wound coil springs, and two billet aluminum spring seats. Its snap-ring grooved body provides adjustable spring seat positions and up to 2.75 inches of front lift, depending on the vehicle application. The large 2.65-inch outside-diameter body and 60mm digressive piston are designed to provide enhanced damping control across changing terrain and driving conditions.\u003cbr\u003eBuilt for demanding light-truck use, each damper features a zinc-plated finish, an 18mm shaft, and a non-reservoir monotube internal design. The included black coil springs feature a 600-pound-per-inch front main spring rate, while the included spring seats support a precise installation. The kit does not include shock boots and is designed without external reservoirs. With Bilstein engineering and application-specific calibration, the B8 6112 delivers a complete suspension solution for drivers seeking dependable lift, stronger support, and improved off-road response.\u003cbr\u003ePlease verify vehicle configuration and application before ordering. Compatible applications include select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 models. This product contains a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Suspension leveling kit for select Toyota 4Runner, Toyota FJ Cruiser, and Lexus GX460 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Range: Provides up to 2.75 inches of front lift depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eKit Contents: Includes two 60mm shock absorbers, two matched coil springs, and two billet aluminum spring seats\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring grooved coilover body with adjustable spring seat positions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube dampers with a 60mm digressive piston for responsive damping control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Rate: Front main spring rate of 600 pounds per inch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Zinc-plated dampers, black coil springs, and 18mm shock shafts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 4.79 inches of shock stroke with 21.65-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Vehicle-specific tuning for select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nStroke\/Travel Length (In): 4.79\u003cbr\u003e\nExtended Length (In): 21.65\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 121.7\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 6112\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (In): 16.86\u003cbr\u003e\nCollapsed Length (Mm): 428.3\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 550.0\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL47-310025\u003cbr\u003e\nPart Number: 47-310025\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771205615725,"sku":"47310025","price":923.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/47-310025_7.jpg?v=1792219494"},{"product_id":"bilstein-b8-6112-suspension-kit-47-309524-for-2019-2023-chevrolet-silverado-1500-and-gmc-sierra-1500","title":"Bilstein B8 6112 Suspension Kit 47-309524 for 2019-2023 Chevrolet Silverado 1500 and GMC Sierra 1500","description":"B8 6112 - Suspension Kit\n\u003cp\u003eUpgrade your light truck’s suspension with the Bilstein B8 6112 suspension kit, part number 47-309524. Designed for select 2019-2023 Chevrolet Silverado 1500 and GMC Sierra 1500 applications, this direct-fit kit combines performance-tuned monotube dampers with custom-matched cold-wound coil springs and billet aluminum spring seats. The system is engineered to provide additional ground clearance, support larger tires, and increase wheel travel for improved on-road handling and off-road capability.\u003cbr\u003eThe kit includes two 60mm shock absorbers, two coil springs, and two spring seats. Multiple snap-ring grooves allow adjustable spring seat positioning and provide up to 2.75 inches of front lift, depending on the application. Its large 2.65-inch outside-diameter body and 60mm digressive piston deliver increased damping control, helping maintain ride comfort and vehicle stability over rough terrain. The 600 pounds-per-inch front spring rate is matched to the Bilstein B8 6112 design for balanced suspension performance.\u003cbr\u003eBilstein B8 6112 dampers feature a zinc-plated finish, an 18mm shaft, and a snap-ring grooved coilover-style body. The shocks have a 4.19-inch stroke, extend to 21.97 inches, and collapse to 17.78 inches. The kit does not include shock boots or an external reservoir. A professional installation is recommended, and vehicle-specific fitment should be confirmed before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit suspension kit for select 2019-2023 Chevrolet Silverado 1500 and GMC Sierra 1500 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes two 60mm monotube shock absorbers, two custom-matched coil springs, and two billet aluminum spring seats\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides adjustable front lift from 0 to 2.75 inches, depending on vehicle application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e60mm digressive piston improves damping control, ride comfort, and handling over rough terrain\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e2.65-inch outside-diameter body supports increased strength and suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSnap-ring grooved coilover body allows multiple spring seat positions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600 pounds-per-inch front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated dampers with black coil springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e4.19-inch stroke, 21.97-inch extended length, and 17.78-inch collapsed length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo shock boots or external reservoir included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nStroke\/Travel Length (In): 4.19\u003cbr\u003e\nExtended Length (In): 21.97\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 106.4\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 6112\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (In): 17.78\u003cbr\u003e\nCollapsed Length (Mm): 451.6\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 558.0\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL47-309524\u003cbr\u003e\nPart Number: 47-309524\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Silverado 1500  2019\u003cbr\u003e\nChevrolet Silverado 1500  2020\u003cbr\u003e\nChevrolet Silverado 1500  2021\u003cbr\u003e\nChevrolet Silverado 1500  2022\u003cbr\u003e\nChevrolet Silverado 1500  2023\u003cbr\u003e\nChevrolet Silverado 1500  2024\u003cbr\u003e\nChevrolet Silverado 1500  2025\u003cbr\u003e\nChevrolet Silverado 1500  2026\u003cbr\u003e\nGMC Sierra 1500  2019\u003cbr\u003e\nGMC Sierra 1500  2020\u003cbr\u003e\nGMC Sierra 1500  2021\u003cbr\u003e\nGMC Sierra 1500  2022\u003cbr\u003e\nGMC Sierra 1500  2023\u003cbr\u003e\nGMC Sierra 1500  2024\u003cbr\u003e\nGMC Sierra 1500  2025\u003cbr\u003e\nGMC Sierra 1500  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771205746797,"sku":"47309524","price":923.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/47-309524_1.jpg?v=1792219514"},{"product_id":"bilstein-b8-6112-suspension-kit-part-47-293557-for-2019-2022-chevrolet-silverado-and-gmc-sierra-1500","title":"Bilstein B8 6112 Suspension Kit, Part 47-293557, for 2019-2022 Chevrolet Silverado and GMC Sierra 1500","description":"B8 6112 - Suspension Kit\n\u003cp\u003eUpgrade your light truck’s suspension with the Bilstein B8 6112 Suspension Kit, Part 47-293557. Designed for select 2019-2022 Chevrolet Silverado 1500 and GMC Sierra 1500 applications, this vehicle-specific kit combines performance-tuned shock absorbers and custom-matched coil springs to improve control, increase ground clearance, and support larger tires. Multiple snap-ring grooves allow adjustable front spring seat positions for up to 2.75 inches of front lift, depending on the application.\u003cbr\u003eThe Bilstein B8 6112 kit includes two 60mm monotube shock absorbers, two cold-wound coil springs, and two billet aluminum spring seats. Each shock features a large 2.65-inch outside diameter body, an 18mm shaft, and a 60mm digressive piston designed to provide consistent damping control across on-road and off-road conditions. The included front springs have a 600-pound-per-inch spring rate for balanced handling and dependable support.\u003cbr\u003eZinc-plated dampers and black springs provide a durable finish, while the snap-ring grooved coilover-style body enables height adjustment without compromising direct-fit installation. The suspension kit has a 5.20-inch stroke, a 16.45-inch collapsed length, and a 21.65-inch extended length. No external reservoir or shock boot is included. Confirm vehicle configuration and application details before installation. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle-specific fitment for select 2019-2022 Chevrolet Silverado 1500 and GMC Sierra 1500 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides adjustable front lift from 0 to 2.75 inches, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes two 60mm monotube shock absorbers, two matched coil springs, and two billet aluminum spring seats\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSnap-ring grooved coilover-style body supports adjustable spring seat positions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDigressive piston design delivers controlled damping for on-road and off-road driving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLarge 2.65-inch shock body improves damping capacity and heat management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront main spring rate is 600 pounds per inch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated dampers and black coil springs provide a durable finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e5.20-inch shock stroke with 16.45-inch collapsed length and 21.65-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir or shock boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nStroke\/Travel Length (In): 5.20\u003cbr\u003e\nExtended Length (In): 21.65\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 132.2\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 6112\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (In): 16.45\u003cbr\u003e\nCollapsed Length (Mm): 417.8\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 550.0\u003cbr\u003e\nParttype: Suspension Kit\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL47-293557\u003cbr\u003e\nPart Number: 47-293557\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nChevrolet Silverado 1500  2019\u003cbr\u003e\nChevrolet Silverado 1500  2020\u003cbr\u003e\nChevrolet Silverado 1500  2021\u003cbr\u003e\nChevrolet Silverado 1500  2022\u003cbr\u003e\nChevrolet Silverado 1500  2023\u003cbr\u003e\nChevrolet Silverado 1500  2024\u003cbr\u003e\nChevrolet Silverado 1500  2025\u003cbr\u003e\nChevrolet Silverado 1500  2026\u003cbr\u003e\nChevrolet Silverado 1500 LTD  2022\u003cbr\u003e\nGMC Sierra 1500  2019\u003cbr\u003e\nGMC Sierra 1500  2020\u003cbr\u003e\nGMC Sierra 1500  2021\u003cbr\u003e\nGMC Sierra 1500  2022\u003cbr\u003e\nGMC Sierra 1500  2023\u003cbr\u003e\nGMC Sierra 1500  2024\u003cbr\u003e\nGMC Sierra 1500  2025\u003cbr\u003e\nGMC Sierra 1500  2026\u003cbr\u003e\nGMC Sierra 1500 Limited  2022","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771205943405,"sku":"47293557","price":923.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/47-293557_1.jpg?v=1792219534"},{"product_id":"bilstein-b8-8112-black-hawk-front-left-corner-module-41-332245-for-2022-2026-toyota-tundra","title":"Bilstein B8 8112 Black Hawk Front Left Corner Module 41-332245 for 2022–2026 Toyota Tundra","description":"B8 8112 Black Hawk - Front Left Corner Module\n\u003cp\u003eUpgrade the front suspension of your Toyota Tundra with the Bilstein B8 8112 Black Hawk 3-Way adjustable front left corner module, part number 41-332245. Designed as a direct-fit solution for light trucks and SUVs, this coilover combines advanced damping control with durable construction for dependable performance on paved roads, rugged trails, and varying vehicle loads. It fits the 2022, 2023, 2024, 2025, and 2026 Toyota Tundra.\u003cbr\u003eThe module uses a large aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and promote cooling during demanding operation. Bilstein ZoneControl® position-sensitive damping helps reduce harsh bottoming while maintaining controlled, compliant suspension action over smaller impacts. The monotube internal design, 60 mm piston, and 22 mm shaft support consistent damping performance across changing terrain and driving conditions.\u003cbr\u003eThree external damping adjustments provide independent high- and low-speed compression control, while the internal bump stop adds further tuning capability. The included spring seat and black front main spring are engineered for a 600-pound-per-inch spring rate, and the EVO Grey damper finish provides a distinctive, durable appearance. The lower eye mount and special upper mount support direct installation, while the smooth-body coilover design is intended for precise suspension tuning without unnecessary complexity.\u003cbr\u003eFeatures: Direct-fit front left corner module for 2022–2026 Toyota Tundra\u003cbr\u003eFeatures: Bilstein B8 8112 Black Hawk 3-Way adjustable coilover design\u003cbr\u003eFeatures: ZoneControl® position-sensitive damping for improved bottoming resistance\u003cbr\u003eFeatures: High- and low-speed compression click adjusters with internal bump stop adjustment\u003cbr\u003eFeatures: Aluminum monotube shock body with finned remote reservoir\u003cbr\u003eFeatures: 60 mm piston and 22 mm shaft for consistent damping control\u003cbr\u003eFeatures: Included spring seat and black 600-pound-per-inch front main spring\u003cbr\u003eFeatures: EVO Grey damper finish with black spring\u003cbr\u003eFeatures: Lower eye mount and special upper mount\u003cbr\u003eFeatures: Bilstein part number 41-332245\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front left corner module for 2022–2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 Black Hawk 3-Way adjustable coilover design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl® position-sensitive damping for improved bottoming resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh- and low-speed compression click adjusters with internal bump stop adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum monotube shock body with finned remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e60 mm piston and 22 mm shaft for consistent damping control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded spring seat and black 600-pound-per-inch front main spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower eye mount and special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein part number 41-332245\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 554.4\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 19.05mm\u003cbr\u003e\nExtended Length (In): 21.83\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nCollapsed Length (Mm): 426.8\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nCollapsed Length (In): 16.80\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nAaiaid Part Number: BBGL41-332245\u003cbr\u003e\nPart Number: 41-332245\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771207188589,"sku":"41332245","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-332245_1.jpg?v=1792219554"},{"product_id":"bilstein-b8-8112-black-hawk-front-right-corner-module-41-332238-for-2022-2026-toyota-tundra","title":"Bilstein B8 8112 Black Hawk Front Right Corner Module 41-332238 for 2022-2026 Toyota Tundra","description":"B8 8112 Black Hawk - Front Right Corner Module\n\u003cp\u003eUpgrade the front right suspension of your Toyota Tundra with the Bilstein B8 8112 Black Hawk 3-way adjustable coilover corner module, part number 41-332238. Designed as a direct-fit solution for light trucks, this premium suspension assembly delivers controlled performance on paved roads, rugged trails, and under changing load conditions. It is compatible with 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models.\u003cbr\u003eThe B8 8112 Black Hawk combines a large aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve heat dissipation. Its monotube internal design and ZoneControl® position-sensitive damping help reduce harsh bottoming while maintaining a smooth, composed ride over smaller impacts. The EVO Grey damper and black spring finish provide a durable, purposeful appearance, while the included spring seat supports straightforward installation.\u003cbr\u003eThree external damping adjustments allow independent tuning of high-speed compression, low-speed compression, and the internal bump stop. This broad adjustment range helps drivers tailor suspension response for trail use, daily driving, towing, and loaded or unloaded conditions. The 60 mm piston, 22 mm shaft, special upper mount, and eye-style lower mount are engineered for the intended application. The module features a 600 lb\/in front main spring rate and does not include a protective boot.\u003cbr\u003eFeature: Direct-fit front right corner module for 2022-2026 Toyota Tundra\u003cbr\u003eFeature: B8 8112 Black Hawk 3-way adjustable coilover design\u003cbr\u003eFeature: Aluminum shock body with finned aluminum remote reservoir\u003cbr\u003eFeature: ZoneControl® position-sensitive damping technology\u003cbr\u003eFeature: High- and low-speed compression click adjusters with internal bump stop adjustment\u003cbr\u003eFeature: Monotube internal design with 60 mm piston and 22 mm shaft\u003cbr\u003eFeature: Includes spring seat with a 600 lb\/in front main spring rate\u003cbr\u003eFeature: EVO Grey damper and black spring finish\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front right corner module for 2022-2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eB8 8112 Black Hawk 3-way adjustable coilover design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum shock body with finned aluminum remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl® position-sensitive damping technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh- and low-speed compression click adjusters with internal bump stop adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with 60 mm piston and 22 mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes spring seat with a 600 lb\/in front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper and black spring finish\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 21.83\u003cbr\u003e\nCollapsed Length (In): 16.80\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 554.4\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 19.05mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nCollapsed Length (Mm): 426.8\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-332238\u003cbr\u003e\nPart Number: 41-332238\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771208892525,"sku":"41332238","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-332238_2.jpg?v=1792219574"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-right-coilover-module-41-326725-for-ford-f-150","title":"Bilstein B8 8112 ZoneControl CR Front Right Coilover Module 41-326725 for Ford F-150","description":"B8 8112 (ZoneControl CR) - Front Right Corner Module\n\u003cp\u003eUpgrade the front suspension of your 2015–2023 Ford F-150 with the Bilstein B8 8112 ZoneControl CR front right corner module, part number 41-326725. Designed as a direct-fit coilover shock for light trucks, this position-sensitive system delivers responsive control during everyday driving while managing larger suspension inputs with confidence. The ZoneControl CR design uses a triple-piston configuration to provide three stages of compression damping and two stages of rebound damping, helping the suspension respond according to its position in the travel range.\u003cbr\u003eThe Bilstein B8 8112 coilover features a monotube internal design, a smooth steel body, and a remote reservoir that helps increase cooling capacity during demanding use. An anodized, bolt-on reservoir chassis mount is included for a secure installation. The threaded spring seat allows ride-height adjustment from 0 to 3.8 inches, depending on the application, while the included black spring uses a 500-pound-per-inch front main spring rate. The damper is finished in EVO Gray and uses a non-adjustable damping configuration for consistent performance.\u003cbr\u003eThis front right Bilstein ZoneControl CR module includes a special upper mount, crossbar lower mount, and spring seat. Aftermarket upper control arms are required for installation, and a boot is not included. The assembly is engineered for the listed Ford F-150 applications and is intended for drivers seeking improved ride control, suspension response, and performance over varied terrain. Verify vehicle fitment and installation requirements before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design for controlled damping across varying suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir included for improved cooling during demanding operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat provides 0–3.8 inches of application-dependent ride-height adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube coilover construction with a smooth steel body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Gray damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e500-pound-per-inch front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and crossbar lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAftermarket upper control arms required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit front right corner module for select 2015–2023 Ford F-150 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 23.22\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 468.7\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nExtended Length (Mm): 589.8\u003cbr\u003e\nCollapsed Length (In): 18.45\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 500 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nAaiaid Part Number: BBGL41-326725\u003cbr\u003e\nPart Number: 41-326725\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771210137709,"sku":"41326725","price":1160.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326725_7.jpg?v=1792219594"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-coilover-module-41-326350","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Coilover Module 41-326350","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eUpgrade the front suspension of your compatible light truck or SUV with the Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module, part number 41-326350. Designed as a direct-fit position-sensitive coilover shock, this module combines controlled ride comfort for everyday driving with enhanced stability over demanding terrain. It is engineered for select 2004-2008 Lexus GX470, 2004-2008 Toyota 4Runner, and 2007 Toyota FJ Cruiser applications.\u003c\/p\u003e\n\u003cp\u003eBilstein ZoneControl CR technology uses three independent pistons to provide three compression zones and two rebound zones. The Dual Speed Adjustability system features click adjusters for independent high- and low-speed compression tuning, while the adjustable internal hydraulic bump stop, or JCO, helps manage larger suspension inputs. A threaded spring seat provides application-dependent ride-height adjustment, and the included remote reservoir helps increase cooling capacity during extended or demanding use.\u003c\/p\u003e\n\u003cp\u003eThis complete coilover module includes the spring seat, front main spring, remote reservoir, and bolt-on anodized reservoir chassis mount. Its monotube internal design, steel body, smooth-body construction, and EVO Grey damper finish are built for consistent performance and durability. The module uses a special upper mount and eye-style lower mount, making proper vehicle fitment verification essential before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Compatible with select 2004-2008 Lexus GX470 models, 2004-2008 Toyota 4Runner models, and 2007 Toyota FJ Cruiser models. Confirm vehicle configuration and suspension application before ordering. \u003cstrong\u003eCalifornia Proposition 65:\u003c\/strong\u003e WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit front right corner coilover module for select Lexus GX470, Toyota 4Runner, and Toyota FJ Cruiser applications\u003c\/li\u003e\n\u003cli\u003eZoneControl CR position-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\n\u003cli\u003eDual Speed Adjustability with click adjusters for high- and low-speed compression\u003c\/li\u003e\n\u003cli\u003eAdjustable internal hydraulic bump stop, also known as JCO\u003c\/li\u003e\n\u003cli\u003eRemote reservoir for improved cooling during demanding driving conditions\u003c\/li\u003e\n\u003cli\u003eThreaded spring seat for application-dependent ride-height adjustment\u003c\/li\u003e\n\u003cli\u003eMonotube internal design with steel smooth-body construction\u003c\/li\u003e\n\u003cli\u003eIncludes spring seat, front main spring, remote reservoir, and reservoir chassis mount\u003c\/li\u003e\n\u003cli\u003eSpecial upper mount and eye-style lower mount\u003c\/li\u003e\n\u003cli\u003eBilstein part number 41-326350\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-326350\u003cbr\u003e\nPart Number: 41-326350\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771213512813,"sku":"41326350","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326350_2.jpg?v=1792219613"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-left-coilover-module-41-326343","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Left Coilover Module 41-326343","description":"B8 8112 (ZoneControl CR DSA+) - Front Left Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR DSA+ Front Left Corner Module, part number 41-326343, is a direct-fit, position-sensitive coilover shock engineered for light trucks and SUVs. Designed for compatible Lexus GX470, Toyota 4Runner, and Toyota FJ Cruiser applications, this front suspension module combines everyday ride comfort with precise control during demanding off-road driving and large suspension inputs. The smooth-body coilover uses a durable steel construction, monotube internal design, and EVO Gray damper finish with a black spring.\u003cbr\u003eZoneControl CR technology uses three independent pistons to provide three stages of compression damping and two stages of rebound damping. Click adjusters provide separate high- and low-speed compression tuning, while the internal JCO hydraulic bump stop helps manage harsh bottoming events. This Dual Speed Adjustable system allows drivers to refine suspension response for changing terrain, vehicle loads, and driving conditions without replacing components.\u003cbr\u003eThe coilover includes a remote reservoir to improve cooling and maintain consistent damping performance during extended use, along with a bolt-on anodized reservoir chassis mount. Its threaded spring seat enables application-dependent ride-height adjustment up to 3 inches. The module includes the spring seat and uses a 600-pound-per-inch front main spring rate. The 14.1 mm eye lower mount and special upper mount are designed for direct-fit installation on the specified vehicle applications. Professional installation and alignment are recommended after installation.\u003cbr\u003eThis Bilstein B8 8112 assembly has an extended length of 22.24 inches and a collapsed length of 17.43 inches. It is supplied without a boot and is intended for the front left corner position. A California Proposition 65 warning applies: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 41-326343\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8112 ZoneControl CR DSA+\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePosition: Front left corner module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Compatible with select Lexus GX470, Toyota 4Runner, and Toyota FJ Cruiser models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Direct-fit smooth-body coilover shock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Position-sensitive design with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustment: Click adjusters for high- and low-speed compression plus internal JCO hydraulic bump stop\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Remote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height: Threaded spring seat with application-dependent adjustment up to 3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Steel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Rate: 600 pounds per inch front main spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 14.1 mm eye\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Gray damper with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-326343\u003cbr\u003e\nPart Number: 41-326343\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771214987373,"sku":"41326343","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326343_3.jpg?v=1792219632"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-corner-module-41-326275-for-toyota-4runner-and-fj-cruiser","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module 41-326275 for Toyota 4Runner and FJ Cruiser","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module, part number 41-326275, is a direct-fit, 3-way adjustable coilover shock designed for select Toyota 4Runner and FJ Cruiser applications. Built for light trucks and SUVs, this front suspension module combines position-sensitive damping with user-adjustable compression control to deliver refined road manners and confident handling over demanding terrain. The smooth-body monotube design uses a 2.65-inch shock body and a 60 mm piston for consistent damping performance and improved heat management.\u003cbr\u003eBilstein ZoneControl CR technology uses three independent pistons to provide three compression zones and two rebound zones. Click adjusters allow precise adjustment of both high- and low-speed compression, while the internal hydraulic bump stop, or JCO, helps control harsh suspension inputs near full compression. The included remote reservoir supports additional cooling capacity during extended off-road use and includes a bolt-on anodized chassis mount for secure installation. The threaded spring seat provides ride-height adjustment from 0 to 3 inches, depending on the application, and the spring seat and front coil spring are included.\u003cbr\u003eDesigned for the front right corner, this Bilstein B8 8112 module features a 600 lb\/in front main spring rate, 22.24-inch extended length, and 17.43-inch collapsed length. It includes a special upper mount and 14.1 mm eye-style lower mount, with a 22 mm shaft and durable steel body. The EVO Grey damper and black spring finish provide a functional, professional appearance. This module is engineered for select 2011-2017 Toyota FJ Cruiser and 2012-2017 Toyota 4Runner models; verify vehicle configuration and side-specific fitment before ordering. California Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 41-326275\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8112 ZoneControl CR DSA+\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front right corner module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Direct-fit, 3-way adjustable monotube coilover shock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Position-sensitive design with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustability: High- and low-speed compression click adjusters with internal hydraulic bump stop adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Remote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Height: Threaded spring seat with 0 to 3 inches of adjustment, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring: Included 600 lb\/in front main spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody: 2.65-inch smooth steel body with 60 mm piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Special upper mount and 14.1 mm eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel Range: 17.43-inch collapsed length and 22.24-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Grey damper with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2011-2017 Toyota FJ Cruiser and 2012-2017 Toyota 4Runner models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-326275\u003cbr\u003e\nPart Number: 41-326275\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771223867501,"sku":"41326275","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326275_2.jpg?v=1792219652"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-corner-module-41-326251","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module 41-326251","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eUpgrade the front suspension of your light truck or SUV with the Bilstein B8 8112 ZoneControl CR DSA+ front right corner module, part number 41-326251. Designed as a direct-fit coilover shock assembly, this position-sensitive system combines controlled ride comfort for everyday driving with precise suspension control over demanding terrain. Its smooth-body monotube design uses a durable steel construction and a 2.65-inch shock body for consistent performance under varied loads and driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe ZoneControl CR system uses three independent pistons to provide three compression zones and two rebound zones. Dual Speed Adjustability allows separate tuning of low- and high-speed compression through convenient click adjusters, while the internal JCO adjustable hydraulic bump stop helps manage harsh suspension inputs. A remote reservoir improves cooling capacity during extended or aggressive use and includes a bolt-on anodized chassis mount for secure installation.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein B8 8112 coilover module includes a threaded spring seat for application-dependent ride-height adjustment of up to 3 inches, along with a 600-pound-per-inch front main spring. The special upper mount and 14.1-millimeter eye lower mount support a direct-fit installation on the specified application. The EVO Grey damper and black spring finish provide a clean, durable appearance, while the 60-millimeter piston and 22-millimeter shaft are engineered for dependable suspension response.\u003c\/p\u003e\n\u003cp\u003ePart number 41-326251 is intended for the front right corner and fits select 2012–2016 Lexus GX460 and 2012–2016 Toyota 4Runner models. Verify vehicle configuration and application details before ordering. Professional installation and alignment are recommended after suspension work.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit front right corner coilover module for select Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\n\u003cli\u003eBilstein B8 8112 ZoneControl CR DSA+ position-sensitive damping technology\u003c\/li\u003e\n\u003cli\u003eThree compression zones and two rebound zones controlled by independent pistons\u003c\/li\u003e\n\u003cli\u003eClick adjusters for separate low- and high-speed compression tuning\u003c\/li\u003e\n\u003cli\u003eAdjustable internal JCO hydraulic bump stop\u003c\/li\u003e\n\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\n\u003cli\u003eThreaded spring seat with application-dependent ride-height adjustment up to 3 inches\u003c\/li\u003e\n\u003cli\u003eSmooth-body monotube design with a 2.65-inch body and 60-millimeter piston\u003c\/li\u003e\n\u003cli\u003e600-pound-per-inch front main spring with black finish\u003c\/li\u003e\n\u003cli\u003eEVO Grey damper finish and durable steel body construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-326251\u003cbr\u003e\nPart Number: 41-326251\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771235860589,"sku":"41326251","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326251_1.jpg?v=1792219676"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-left-corner-module-41-326244","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Left Corner Module 41-326244","description":"B8 8112 (ZoneControl CR DSA+) - Front Left Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR DSA+ front left corner module, part number 41-326244, is a direct-fit adjustable coilover system engineered for light trucks and SUVs. This smooth-body monotube coilover combines position-sensitive damping with independent adjustment for low- and high-speed compression, allowing drivers to fine-tune suspension performance for daily driving, demanding trails, and changing terrain. The module includes a threaded spring seat for application-specific ride-height adjustment and a 600 lb\/in front main spring.\u003cbr\u003eZoneControl CR technology uses a triple-piston design with three compression zones and two rebound zones. This position-sensitive setup helps provide controlled, comfortable damping during normal suspension movement while delivering additional support during larger impacts. Click adjusters provide precise control over high- and low-speed compression, while the internal JCO hydraulic bump stop can be adjusted to help manage suspension travel near full compression. The included remote reservoir increases oil capacity and cooling performance, and the bolt-on anodized reservoir mount provides a secure installation solution.\u003cbr\u003eThis Bilstein B8 8112 module features an EVO Grey damper finish, black spring, steel body construction, a 60mm piston, and a 22mm shaft. It is designed with a special upper mount and an eye-style lower mount. The front left corner module is compatible with select 2012-2016 Lexus GX460 and Toyota 4Runner applications; verify vehicle fitment and suspension configuration before ordering. Professional installation is recommended, and alignment should be checked after installation or ride-height changes. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front left corner coilover module for select Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl CR position-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDual Speed Adjustability with click controls for high- and low-speed compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable internal JCO hydraulic bump stop for improved control near full compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount for increased cooling capacity\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat for application-specific ride-height adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with a 60mm piston and 22mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600 lb\/in front main spring with black finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish and steel body construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 ZoneControl CR DSA+ series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 22.24\u003cbr\u003e\nExtended Length (Mm): 564.8\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-326244\u003cbr\u003e\nPart Number: 41-326244\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771238973549,"sku":"41326244","price":1457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-326244_10.jpg?v=1792219695"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-right-coilover-module-41-324165","title":"Bilstein B8 8112 ZoneControl CR Front Right Coilover Module 41-324165","description":"B8 8112 (ZoneControl CR) - Front Right Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR front right corner module, part number 41-324165, is a direct-fit position-sensitive coilover designed for select light trucks and SUVs, including the 2012–2016 Lexus GX460 and 2012–2016 Toyota 4Runner. This complete module combines a monotube steel damper, coil spring, threaded spring seat, and remote reservoir to deliver controlled handling and improved ride comfort across changing terrain and suspension loads. Its smooth-body coilover construction and special upper mount are engineered for dependable installation and performance.\u003cbr\u003eZoneControl CR technology uses a triple-piston design with three independent compression zones and two rebound zones. This position-sensitive damping system automatically adjusts control according to suspension position, helping provide comfortable everyday driving characteristics while maintaining control during larger suspension inputs. The remote reservoir increases fluid capacity and cooling performance, while the included bolt-on anodized reservoir mount supports secure chassis installation. Damping is non-adjustable, and the system does not include a protective boot.\u003cbr\u003eThe threaded spring seat allows ride-height adjustment from 0 to 3.8 inches, depending on the vehicle application. The module includes a 600-pound-per-inch front main spring, with optional heavy-load springs available under Bilstein part numbers 53-291387 and 53-332837. The damper features a 60 mm piston, 22 mm shaft, 14.1 mm eye-style lower mount, and EVO Grey damper finish with a black spring. Its extended length is 22.80 inches and its collapsed length is 17.99 inches. Professional installation and application verification are recommended before purchase. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit Bilstein B8 8112 ZoneControl CR front right corner module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design with three independent pistons\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir for increased cooling capacity and consistent performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat with application-dependent ride-height adjustment from 0 to 3.8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600-pound-per-inch front main spring included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube steel damper with 60 mm piston and 22 mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body coilover design with special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14.1 mm eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select 2012–2016 Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional heavy-load springs available: 53-291387 and 53-332837\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nFinish: Dampers: EVO Grey \/ Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 579.1\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nCollapsed Length (Mm): 456.9\u003cbr\u003e\nCollapsed Length (In): 17.99\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-324165\u003cbr\u003e\nPart Number: 41-324165\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771243495533,"sku":"41324165","price":1160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-324165_2.jpg?v=1792219712"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-left-coilover-module-part-41-324158","title":"Bilstein B8 8112 ZoneControl CR Front Left Coilover Module, Part 41-324158","description":"B8 8112 (ZoneControl CR) - Front Left Corner Module\n\u003cp\u003eUpgrade the front suspension of your light truck or SUV with the Bilstein B8 8112 ZoneControl CR front left corner module, part number 41-324158. Designed as a direct-fit coilover shock, this module combines position-sensitive damping with adjustable ride height and a remote reservoir for improved cooling during demanding driving conditions. It is engineered for select 2012–2016 Lexus GX460 and Toyota 4Runner applications.\u003cbr\u003eThe ZoneControl CR system uses a triple-piston design with three independent compression zones and two rebound zones. This progressive damping technology helps provide controlled response over large suspension inputs while maintaining ride comfort during everyday driving. The monotube internal design, steel smooth body, and 60 mm piston provide consistent performance across changing terrain and suspension movement.\u003cbr\u003eThis Bilstein B8 8112 coilover features a threaded spring seat with ride-height adjustability from 0 to 3.8 inches, depending on the application. The front main spring rate is 600 pounds per inch, and the module includes a spring seat and remote reservoir with a bolt-on anodized chassis mount. The damper is non-adjustable and finished in EVO Grey, while the included spring is black. The lower mount uses a 14.1 mm eyelet, and the special upper mount is designed for application-specific installation. Optional heavy-load springs 53-291387 and 53-332837 are available for select setups.\u003cbr\u003eCompatible applications include the 2012–2016 Lexus GX460 and 2012–2016 Toyota 4Runner, subject to vehicle configuration and suspension requirements. Verify application details before ordering. This product may expose you to chemicals identified by California Proposition 65 as causing cancer or reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 ZoneControl CR front left corner coilover module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 41-324158\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design for select Lexus GX460 and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design with three independent pistons\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir for increased cooling capacity\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat with 0–3.8-inch ride-height adjustability, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with a 60 mm piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e600-pound-per-inch front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteel smooth-body coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes spring seat and bolt-on anodized reservoir chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14.1 mm eyelet lower mount and special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional heavy-load springs 53-291387 and 53-332837\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 579.1\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nCollapsed Length (In): 17.99\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nExtended Length (In): 22.80\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey \/ Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 456.9\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-324158\u003cbr\u003e\nPart Number: 41-324158\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771245494381,"sku":"41324158","price":1160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-324158_2.jpg?v=1792219735"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-right-coilover-module-41-319581-for-toyota-tacoma","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Right Coilover Module 41-319581 for Toyota Tacoma","description":"B8 8112 (ZoneControl CR DSA+) - Front Right Corner Module\n\u003cp\u003eUpgrade the front suspension of your 2012–2021 Toyota Tacoma with the Bilstein B8 8112 ZoneControl CR DSA+ Front Right Corner Module, part number 41-319581. This direct-fit coilover shock is engineered for light trucks and SUVs, combining position-sensitive damping with user-adjustable compression and rebound control. Its monotube design, steel body, and EVO Grey damper finish provide consistent performance and durability for daily driving, towing, spirited road use, and demanding off-road conditions.\u003c\/p\u003e\n\u003cp\u003eThe ZoneControl CR system uses three independent pistons to create three compression zones and two rebound zones, helping the suspension respond appropriately to both small road imperfections and large suspension inputs. Click adjusters provide precise high- and low-speed compression tuning, while the internal hydraulic bump stop, or JCO, adds adjustable control near full compression. The included remote reservoir improves heat management during extended or aggressive use and comes with a bolt-on anodized chassis mount for secure installation.\u003c\/p\u003e\n\u003cp\u003eThis front right coilover module includes a threaded spring seat for ride-height adjustment from 0 to 3 inches, depending on the application, along with a 600-pound-per-inch main spring and included spring seat. It features a 2.65-inch shock body, 60 mm piston, 22 mm shaft, eye-style lower mount, and special upper mount. Aftermarket upper control arms are required, and optional heavy-load springs are available separately under Bilstein spring numbers 53-291387 and 53-332837. The assembly does not include a protective boot.\u003c\/p\u003e\n\u003cp\u003eBilstein B8 8112 ZoneControl CR DSA+ coilovers deliver a balance of everyday ride comfort and highly controlled suspension response. Designed for direct fitment on compatible Toyota Tacoma applications from 2012 through 2021, this front right module is a strong choice for drivers who need adjustable performance across changing terrain and load conditions. Professional installation and alignment are recommended after installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit Bilstein B8 8112 ZoneControl CR DSA+ front right corner module\u003c\/li\u003e\n\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\n\u003cli\u003eClick adjusters for high- and low-speed compression tuning\u003c\/li\u003e\n\u003cli\u003eAdjustable internal hydraulic bump stop, also known as JCO\u003c\/li\u003e\n\u003cli\u003eMonotube coilover design with a 2.65-inch steel shock body\u003c\/li\u003e\n\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\n\u003cli\u003eThreaded spring seat with 0–3-inch ride-height adjustment, depending on application\u003c\/li\u003e\n\u003cli\u003e600-pound-per-inch front main spring included\u003c\/li\u003e\n\u003cli\u003e60 mm piston and 22 mm shaft\u003c\/li\u003e\n\u003cli\u003eEye-style lower mount with special upper mount\u003c\/li\u003e\n\u003cli\u003eAftermarket upper control arms required\u003c\/li\u003e\n\u003cli\u003eFits 2012–2021 Toyota Tacoma applications\u003c\/li\u003e\n\u003cli\u003eOptional heavy-load springs available separately: 53-291387 and 53-332837\u003c\/li\u003e\n\u003cli\u003eEVO Grey damper finish with black spring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nExtended Length (Mm): 568.8\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nExtended Length (In): 22.39\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 15.88mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nCollapsed Length (In): 17.42\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nAaiaid Part Number: BBGL41-319581\u003cbr\u003e\nPart Number: 41-319581\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013\u003cbr\u003e\nToyota Tacoma  2014\u003cbr\u003e\nToyota Tacoma  2015\u003cbr\u003e\nToyota Tacoma  2016\u003cbr\u003e\nToyota Tacoma  2017\u003cbr\u003e\nToyota Tacoma  2018\u003cbr\u003e\nToyota Tacoma  2019\u003cbr\u003e\nToyota Tacoma  2020\u003cbr\u003e\nToyota Tacoma  2021\u003cbr\u003e\nToyota Tacoma  2022\u003cbr\u003e\nToyota Tacoma  2023","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771249819757,"sku":"41319581","price":1460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-319581_1.jpg?v=1792219753"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-dsa-front-left-corner-module-41-319574-for-toyota-tacoma","title":"Bilstein B8 8112 ZoneControl CR DSA+ Front Left Corner Module 41-319574 for Toyota Tacoma","description":"B8 8112 (ZoneControl CR DSA+) - Front Left Corner Module\n\u003cp\u003eUpgrade the front suspension of your Toyota Tacoma with the Bilstein B8 8112 ZoneControl CR DSA+ Front Left Corner Module, part number 41-319574. Designed as a direct-fit coilover shock for light trucks and SUVs, this position-sensitive system combines daily driving comfort with precise control over demanding suspension inputs. The smooth-body monotube design uses a durable steel body, EVO Grey damper finish, black spring, remote reservoir, and bolt-on anodized reservoir mount for improved cooling during extended use.\u003c\/p\u003e\n\u003cp\u003eBilstein ZoneControl CR technology uses three independent pistons to provide three stages of compression damping and two stages of rebound damping based on suspension position. The click adjusters provide independent high- and low-speed compression adjustment, while the adjustable JCO internal hydraulic bump stop helps manage harsh impacts and large suspension movements. A threaded spring seat allows ride-height adjustment from 0 to 3 inches, depending on vehicle application. The included spring seat and 600-pound-per-inch front main spring support controlled performance across varied terrain.\u003c\/p\u003e\n\u003cp\u003eThis Front Left Corner Module includes a 2.65-inch body, 60 mm piston, 22 mm shaft, eye-style lower mount, special upper mount, and remote reservoir. Aftermarket upper control arms are required for installation, and optional heavy-load springs are available separately under Bilstein spring part numbers 53-291387 and 53-332837. The assembly is intended for the listed Toyota Tacoma applications from 2012 through 2021. Verify vehicle configuration, suspension setup, and left-front fitment before ordering. Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit Bilstein B8 8112 ZoneControl CR DSA+ front left corner module\u003c\/li\u003e\n\u003cli\u003ePart number 41-319574\u003c\/li\u003e\n\u003cli\u003eFits select 2012-2021 Toyota Tacoma applications\u003c\/li\u003e\n\u003cli\u003ePosition-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\n\u003cli\u003eClick adjusters for independent high- and low-speed compression control\u003c\/li\u003e\n\u003cli\u003eAdjustable JCO internal hydraulic bump stop\u003c\/li\u003e\n\u003cli\u003eThreaded spring seat supports 0-3 inches of ride-height adjustment, depending on application\u003c\/li\u003e\n\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\n\u003cli\u003eMonotube coilover design with smooth steel body\u003c\/li\u003e\n\u003cli\u003e60 mm piston and 22 mm shaft\u003c\/li\u003e\n\u003cli\u003e600-pound-per-inch front main spring included\u003c\/li\u003e\n\u003cli\u003eAftermarket upper control arms required\u003c\/li\u003e\n\u003cli\u003eOptional heavy-load springs: 53-291387 and 53-332837\u003c\/li\u003e\n\u003cli\u003eEVO Grey dampers with black springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nOptional Heavy Load Springs: 53-291387, 53-332837\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 15.88mm\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR DSA+)\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 600 lbs\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nExtended Length (Mm): 568.8\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 22.39\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 442.6\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.43\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-319574\u003cbr\u003e\nPart Number: 41-319574\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013\u003cbr\u003e\nToyota Tacoma  2014\u003cbr\u003e\nToyota Tacoma  2015\u003cbr\u003e\nToyota Tacoma  2016\u003cbr\u003e\nToyota Tacoma  2017\u003cbr\u003e\nToyota Tacoma  2018\u003cbr\u003e\nToyota Tacoma  2019\u003cbr\u003e\nToyota Tacoma  2020\u003cbr\u003e\nToyota Tacoma  2021\u003cbr\u003e\nToyota Tacoma  2022\u003cbr\u003e\nToyota Tacoma  2023","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771252572269,"sku":"41319574","price":1460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-319574_1.jpg?v=1792219773"},{"product_id":"bilstein-b8-8112-black-hawk-rear-right-corner-module-41-314333-for-ford-bronco","title":"Bilstein B8 8112 Black Hawk Rear Right Corner Module 41-314333 for Ford Bronco","description":"B8 8112 Black Hawk - Rear Right Corner Module\n\u003cp\u003eUpgrade the rear suspension of your Ford Bronco with the Bilstein B8 8112 Black Hawk rear right corner module, part number 41-314333. Designed as a direct-fit solution for select 2021–2026 Ford Bronco models, this coilover assembly delivers controlled performance on paved roads, rugged trails, and varying load conditions. The B8 8112 Black Hawk series combines advanced damping technology with durable construction for drivers who demand responsive handling and a smooth, composed ride.\u003c\/p\u003e\n\u003cp\u003eThe module uses a large aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve heat dissipation during demanding use. Bilstein ZoneControl® position-sensitive damping helps reduce harsh bottoming while maintaining comfort over smaller impacts. Three external damping adjustments provide independent high- and low-speed compression tuning, while the internal bump stop adds further control through the suspension travel range. Click adjusters make it easier to tailor the rear suspension to driving conditions, terrain, and vehicle load.\u003c\/p\u003e\n\u003cp\u003eFinished with EVO Grey dampers and a black spring, this smooth-body coilover includes a spring seat and a special upper mount configuration. The lower eye mount uses a 1-inch mounting interface with Heim spacers, and the assembly features a 60 mm piston, 22 mm shaft, and a 288 lb\/in rear main spring rate. The reservoir is finned aluminum, and the design is intended for light-truck applications. No boot is included. This Bilstein B8 8112 Black Hawk corner module is engineered to provide the adjustability, durability, and suspension control needed for serious Ford Bronco use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2021–2026 Ford Bronco. This product contains a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBilstein B8 8112 Black Hawk rear right corner module\u003c\/li\u003e\n\u003cli\u003ePart number 41-314333\u003c\/li\u003e\n\u003cli\u003eDirect-fit application for select 2021–2026 Ford Bronco models\u003c\/li\u003e\n\u003cli\u003eAluminum shock body with finned aluminum remote reservoir\u003c\/li\u003e\n\u003cli\u003eZoneControl® position-sensitive damping technology\u003c\/li\u003e\n\u003cli\u003eHigh- and low-speed compression click adjusters\u003c\/li\u003e\n\u003cli\u003eInternal bump stop for enhanced bottoming control\u003c\/li\u003e\n\u003cli\u003e60 mm piston and 22 mm shaft\u003c\/li\u003e\n\u003cli\u003eSmooth-body coilover design\u003c\/li\u003e\n\u003cli\u003eEVO Grey damper with black spring\u003c\/li\u003e\n\u003cli\u003eSpring seat included\u003c\/li\u003e\n\u003cli\u003eLower eye mount with 1-inch interface and Heim spacers\u003c\/li\u003e\n\u003cli\u003e288 lb\/in rear main spring rate\u003c\/li\u003e\n\u003cli\u003eBoot not included\u003c\/li\u003e\n\u003cli\u003eLight-truck suspension application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 26.60\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (Mm): 674.6\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: Eye 25.4mm with Heim Spacers\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 288\u003cbr\u003e\nCollapsed Length (Mm): 467.1\u003cbr\u003e\nCollapsed Length (In): 18.40\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-314333\u003cbr\u003e\nPart Number: 41-314333\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771258929261,"sku":"41314333","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-314333_1.jpg?v=1792219792"},{"product_id":"bilstein-b8-8112-black-hawk-rear-left-corner-module-41-314326-for-ford-bronco","title":"Bilstein B8 8112 Black Hawk Rear Left Corner Module 41-314326 for Ford Bronco","description":"B8 8112 Black Hawk - Rear Left Corner Module\n\u003cp\u003eUpgrade the rear suspension of your Ford Bronco with the Bilstein B8 8112 Black Hawk Rear Left Corner Module, part number 41-314326. Designed as a direct-fit solution for select 2021–2026 Ford Bronco models, this high-performance coilover combines advanced damping control, durable construction, and trail-ready versatility. It is engineered to deliver controlled handling on paved roads, rugged trails, and under varying load conditions.\u003cbr\u003eThe Bilstein B8 8112 Black Hawk features a smooth aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve cooling during demanding driving. Its monotube internal design and large piston support consistent damping performance, while ZoneControl® position-sensitive damping helps reduce harsh bottoming and maintain a composed ride over smaller impacts. The integrated internal bump stop further expands suspension control through challenging terrain.\u003cbr\u003eThree external damping adjustments provide independent high- and low-speed compression tuning, allowing drivers to tailor suspension response to vehicle setup, cargo, and driving conditions. The coilover includes a spring seat and uses a special upper mount with an eye-style lower mount and Heim spacers. EVO Gray dampers and black springs provide a functional, professional appearance suited to the Bilstein B8 8112 Black Hawk series.\u003cbr\u003eThis Bilstein rear left corner module is intended for light-truck applications and fits 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco models. Professional installation is recommended, followed by proper suspension setup and alignment. California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit rear left corner module for select 2021–2026 Ford Bronco models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eB8 8112 Black Hawk series coilover with monotube internal design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum shock body with finned aluminum remote reservoir for increased oil capacity and cooling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl® position-sensitive damping helps reduce harsh bottoming\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThree-way damping adjustment with high- and low-speed compression clickers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal adjustable bump stop for enhanced suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included with black coil spring and EVO Gray damper finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and eye-style lower mount with Heim spacers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e22 mm shaft and 60 mm piston for consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for light-truck use on paved roads and rugged trails\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nExtended Length (Mm): 674.6\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nLower Mount Type: Eye 25.4mm with Heim Spacers\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nExtended Length (In): 26.60\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nCollapsed Length (Mm): 467.1\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 288\u003cbr\u003e\nCollapsed Length (In): 18.40\u003cbr\u003e\nAaiaid Part Number: BBGL41-314326\u003cbr\u003e\nPart Number: 41-314326\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771259650157,"sku":"41314326","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-314326_1.jpg?v=1792219811"},{"product_id":"bilstein-b8-8112-black-hawk-front-right-corner-module-41-314227-for-ford-bronco","title":"Bilstein B8 8112 Black Hawk Front Right Corner Module 41-314227 for Ford Bronco","description":"B8 8112 Black Hawk - Front Right Corner Module\n\u003cp\u003eUpgrade the front right suspension of your Ford Bronco with the Bilstein B8 8112 Black Hawk 3-way adjustable coilover corner module, part number 41-314227. Designed as a direct-fit solution for 2021–2026 Ford Bronco models, this light-truck suspension component combines durable construction, advanced damping control, and a carefully matched spring setup for confident performance on paved roads and rugged trails. The front main spring is rated at 400 pounds per inch, and the included spring seat helps simplify installation.\u003cbr\u003eThe B8 8112 Black Hawk uses a large 2.65-inch aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and improve heat dissipation during demanding driving. Its monotube internal design and 60 mm piston support consistent damping performance, while the 22 mm shaft provides strength for off-road use. EVO Gray dampers and black springs create a functional, understated finish suitable for a wide range of vehicle builds.\u003cbr\u003eBilstein’s ZoneControl® position-sensitive damping system manages compression and rebound behavior across changing suspension positions, helping reduce harsh bottoming while maintaining controlled response over smaller impacts. Click adjusters provide separate high- and low-speed compression tuning, and the internal bump stop adds another layer of bottoming control. The assembly features a smooth-body coilover design, crossbar lower mount, special upper mount, and remote reservoir configuration. Aftermarket upper control arms are required for installation. This module is intended for the front right corner and does not include a protective boot.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8112 Black Hawk\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 41-314227\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front right corner module for 2021–2026 Ford Bronco\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Smooth-body adjustable coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustment: High- and low-speed compression click adjusters with internal bump stop\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping Technology: ZoneControl® position-sensitive compression and rebound control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum with finned remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 22 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Rate: 400 pounds per inch\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Crossbar lower mount with special upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Control Arms: Aftermarket upper arms required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Gray dampers with black springs\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 594.7\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nFinish: Dampers: EVO Grey\/Springs: Black\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Crossbar\u003cbr\u003e\nExtended Length (In): 23.40\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nCollapsed Length (Mm): 446.2\u003cbr\u003e\nSeries: B8 8112 Black Hawk\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nCollapsed Length (In): 17.59\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 400\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nAaiaid Part Number: BBGL41-314227\u003cbr\u003e\nPart Number: 41-314227\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Bronco  2021\u003cbr\u003e\nFord Bronco  2022\u003cbr\u003e\nFord Bronco  2023\u003cbr\u003e\nFord Bronco  2024\u003cbr\u003e\nFord Bronco  2025\u003cbr\u003e\nFord Bronco  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771262402669,"sku":"41314227","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-314227_6.jpg?v=1792219837"},{"product_id":"bmr-suspension-sb031r-front-and-rear-sway-bar-kit-with-bushings-for-1978-1987-g-body","title":"BMR Suspension SB031R Front and Rear Sway Bar Kit with Bushings for 1978-1987 G-Body","description":"Sway Bar Kit With Bushings, Front (SB020) And Rear (SB021)\n\u003cp\u003eImprove cornering response and reduce body roll with the BMR Suspension SB031R Sway Bar Kit. Designed for 1978-1987 G-Body applications, this front and rear kit increases sway bar rates over many factory setups to provide more controlled handling for street performance, autocross, and road racing. The kit includes front and rear sway bars, bushings, and mounting hardware for a complete installation package.\u003cbr\u003eThe front sway bar is manufactured from solid steel and uses a 1.25-inch diameter bar to deliver increased roll resistance. The rear sway bar features a hollow steel construction with a 1.00-inch diameter for balanced handling performance. Both bars are finished in BMR Suspension’s durable red powder coat for corrosion resistance and a distinctive appearance. The front bar is non-adjustable, while the rear bar uses a fixed configuration for consistent performance.\u003cbr\u003eThe BMR Suspension SB031R is engineered for enthusiasts who want sharper turn-in, improved vehicle balance, and greater confidence during spirited driving. It fits select 1978-1987 Buick Regal and 1985-1987 Oldsmobile Cutlass models, including the listed applications. Verify vehicle fitment before ordering to ensure compatibility with your specific chassis and suspension configuration. Mounting hardware and bushings are included, and the kit is sold as a complete front and rear set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Front and rear sway bar kit for select 1978-1987 G-Body vehicles\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHandling Improvement: Reduces body roll and improves cornering response\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront Sway Bar: Solid steel construction with a 1.25-inch diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear Sway Bar: Hollow steel construction with a 1.00-inch diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustability: Non-adjustable front bar and fixed rear bar\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Durable steel construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Red powder coat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded Components: Front and rear sway bars, bushings, and mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntended Use: Street performance, autocross, and road racing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: Sold as a complete kit\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPosition: Front and rear\u003cbr\u003e\nFront Sway Bar Type: Solid\u003cbr\u003e\nFront Sway Bar Adjustable: Non-adjustable\u003cbr\u003e\nRear Sway Bar Type: Hollow\u003cbr\u003e\nRear Sway Bar Adjustable: Fixed\u003cbr\u003e\nFront Sway Bar Diameter (In): 1.25 inches\u003cbr\u003e\nFront Sway Bar Diameter (Mm): 32.0 mm\u003cbr\u003e\nRear Sway Bar Diameter (In): 1.00 inches\u003cbr\u003e\nRear Sway Bar Diameter (Mm): 25.0 mm\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nSway Bar Finish: Red Powder Coat\u003cbr\u003e\nSway Bar Material: Steel\u003cbr\u003e\nQuantity: Sold as a kit.\u003cbr\u003e\nAaiaid Part Number: FDGDSB031R\u003cbr\u003e\nPart Number: SB031R\u003cbr\u003e\nBrand Aaia: FDGD\u003cbr\u003e\nFits\u003cbr\u003e\nBuick Regal  1978\u003cbr\u003e\nBuick Regal  1979\u003cbr\u003e\nBuick Regal  1980\u003cbr\u003e\nBuick Regal  1981\u003cbr\u003e\nBuick Regal  1982\u003cbr\u003e\nBuick Regal  1983\u003cbr\u003e\nBuick Regal  1984\u003cbr\u003e\nBuick Regal  1985\u003cbr\u003e\nBuick Regal  1986\u003cbr\u003e\nBuick Regal  1987\u003cbr\u003e\nChevrolet Malibu  1978\u003cbr\u003e\nChevrolet Malibu  1979\u003cbr\u003e\nChevrolet Malibu  1980\u003cbr\u003e\nChevrolet Malibu  1981\u003cbr\u003e\nChevrolet Malibu  1982\u003cbr\u003e\nChevrolet Malibu  1983\u003cbr\u003e\nChevrolet Monte Carlo  1978\u003cbr\u003e\nChevrolet Monte Carlo  1979\u003cbr\u003e\nChevrolet Monte Carlo  1980\u003cbr\u003e\nChevrolet Monte Carlo  1981\u003cbr\u003e\nChevrolet Monte Carlo  1982\u003cbr\u003e\nChevrolet Monte Carlo  1983\u003cbr\u003e\nChevrolet Monte Carlo  1984\u003cbr\u003e\nChevrolet Monte Carlo  1985\u003cbr\u003e\nChevrolet Monte Carlo  1986\u003cbr\u003e\nChevrolet Monte Carlo  1987\u003cbr\u003e\nOldsmobile Cutlass  1978\u003cbr\u003e\nOldsmobile Cutlass  1979\u003cbr\u003e\nOldsmobile Cutlass  1980\u003cbr\u003e\nOldsmobile Cutlass  1981\u003cbr\u003e\nOldsmobile Cutlass  1985\u003cbr\u003e\nOldsmobile Cutlass  1986\u003cbr\u003e\nOldsmobile Cutlass  1987\u003cbr\u003e\nPontiac Grand Prix  1978\u003cbr\u003e\nPontiac Grand Prix  1979\u003cbr\u003e\nPontiac Grand Prix  1980\u003cbr\u003e\nPontiac Grand Prix  1981\u003cbr\u003e\nPontiac Grand Prix  1982\u003cbr\u003e\nPontiac Grand Prix  1983\u003cbr\u003e\nPontiac Grand Prix  1984\u003cbr\u003e\nPontiac Grand Prix  1985\u003cbr\u003e\nPontiac Grand Prix  1986\u003cbr\u003e\nPontiac Grand Prix  1987","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":67771263418477,"sku":"SB031R","price":479.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/SB031R.jpg?v=1792219844"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-right-corner-coilover-module-41-284551","title":"Bilstein B8 8112 ZoneControl CR Front Right Corner Coilover Module 41-284551","description":"B8 8112 (ZoneControl CR) - Front Right Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR front right corner module, part number 41-284551, is a direct-fit position-sensitive coilover shock designed for light trucks and SUVs. Its smooth-body monotube construction uses a 2.65-inch body and a 60 mm piston to provide consistent damping performance, improved heat control, and reliable suspension control during daily driving and demanding off-road use. The zinc-plated damper and black spring finish provide durable protection in a range of driving environments.\u003cbr\u003eZoneControl CR technology uses a triple-piston design with three independent compression zones and two rebound zones. This position-sensitive damping system automatically adjusts suspension response according to shock position and input severity, helping deliver a controlled, comfortable ride over smaller irregularities while providing additional support during larger suspension movements. The non-adjustable damping design is calibrated for dependable performance without manual tuning.\u003cbr\u003eThis Bilstein B8 8112 coilover module includes a remote reservoir for increased cooling capacity and a bolt-on anodized reservoir chassis mount. A threaded spring seat allows ride-height adjustment from 0 to 3.8 inches, depending on the application, while the included spring seat and 650 lb\/in front main spring support the intended suspension setup. The module features a special upper mount, eye-style lower mount, 22 mm shaft, and steel body construction. Aftermarket upper control arms are required for installation, and the assembly does not include a protective boot. Professional installation and application verification are recommended.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front right corner coilover module for applicable light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B8 8112 ZoneControl CR position-sensitive damping system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-piston design with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with smooth steel body construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat with application-dependent ride-height adjustment from 0 to 3.8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e650 lb\/in front main spring rate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping calibrated for controlled street and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated damper with black spring finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAftermarket upper control arms required for installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 41-284551\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nOptional Heavy Load Springs: N\/A\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nCollapsed Length (In): 19.43\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 16.1mm\u003cbr\u003e\nExtended Length (In): 25.79\u003cbr\u003e\nCollapsed Length (Mm): 493.6\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nExtended Length (Mm): 655.1\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 650 lbs\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL41-284551\u003cbr\u003e\nPart Number: 41-284551\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771263484013,"sku":"41284551","price":1091.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-284551_1.jpg?v=1792219856"},{"product_id":"bilstein-b8-8112-zonecontrol-cr-front-left-coilover-shock-module-41-284544","title":"Bilstein B8 8112 ZoneControl CR Front Left Coilover Shock Module 41-284544","description":"B8 8112 (ZoneControl CR) - Front Left Corner Module\n\u003cp\u003eThe Bilstein B8 8112 ZoneControl CR front left corner module is a direct-fit position-sensitive coilover shock designed for select light trucks and SUVs. Part number 41-284544 combines Bilstein’s advanced damping technology with a smooth-body coilover design, providing improved ride comfort during everyday driving and confident control over large suspension inputs. This module includes a remote reservoir to help increase cooling capacity and an anodized, bolt-on chassis mount for secure installation.\u003cbr\u003eBilstein ZoneControl CR technology uses three independent pistons to deliver three stages of compression damping and two stages of rebound damping. This position-sensitive design automatically adapts damping performance based on suspension travel, helping the vehicle remain composed across changing road conditions without relying on externally adjustable damping. The monotube construction and 60-millimeter piston provide consistent performance, while the zinc-plated damper body and black spring offer durable service in demanding environments.\u003cbr\u003eThe threaded spring seat allows ride-height adjustment from 0 to 3.8 inches, depending on vehicle application, making it easier to tailor suspension setup and clearance requirements. The coilover is supplied with a 650-pound-per-inch front spring, special upper mount, eye-style lower mount, and integrated spring seat. Aftermarket upper control arms are required for installation. Verify vehicle compatibility, corner position, suspension configuration, and application-specific adjustment range before ordering. The manufacturer’s warning states: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit front left corner coilover module for select light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZoneControl CR position-sensitive damping with three compression zones and two rebound zones\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThree independent piston design for controlled damping throughout suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with included bolt-on anodized chassis mount for improved cooling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded spring seat provides ride-height adjustment from 0 to 3.8 inches, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with a 60-millimeter piston and 22-millimeter shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes a 650-pound-per-inch front main spring and spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with zinc-plated damper and black spring finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecial upper mount and 16.1-millimeter eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAftermarket upper control arms are required\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 25.79\u003cbr\u003e\nCollapsed Length (In): 19.43\u003cbr\u003e\nExtended Length (Mm): 655.1\u003cbr\u003e\nOptional Heavy Load Springs: N\/A\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nFinish: Dampers: Zinc Plated\/Springs: Black\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Coilover)\u003cbr\u003e\nLower Mount Type: Eye 16.1mm\u003cbr\u003e\nCollapsed Length (Mm): 493.6\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nUpper Mount Type: Special\u003cbr\u003e\nSeries: B8 8112 (ZoneControl CR)\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nAftermarket Upper Arms Required: Yes\u003cbr\u003e\nFront Main Spring Rate (Lbs\/In): 650 lbs\u003cbr\u003e\nBody Material: Steel\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nShaft Diameter (Mm): 22.0\u003cbr\u003e\nAaiaid Part Number: BBGL41-284544\u003cbr\u003e\nPart Number: 41-284544\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771263582317,"sku":"41284544","price":1091.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/41-284544_1.jpg?v=1792219873"},{"product_id":"bilstein-b12-special-rear-coil-spring-set-36-281824-for-toyota-4runner-fj-cruiser-and-lexus-gx460","title":"Bilstein B12 (Special) Rear Coil Spring Set 36-281824 for Toyota 4Runner, FJ Cruiser and Lexus GX460","description":"B12 (Special) - Coil Spring Set\n\u003cp\u003eUpgrade your vehicle’s suspension with the Bilstein B12 (Special) coil spring set, part number 36-281824. Designed for select Toyota 4Runner, Toyota FJ Cruiser, and Lexus GX460 applications, this rear spring kit is engineered to help achieve a performance-focused ride height while maintaining dependable suspension control. Bilstein combines suspension expertise, quality construction, and application-specific design to support improved handling and a balanced appearance.\u003c\/p\u003e\n\u003cp\u003eThese black-finished rear coil springs feature a linear spring design and a main spring rate of 186 pounds per inch. The linear rate provides consistent resistance throughout suspension travel, helping deliver predictable vehicle behavior under changing road conditions. The kit includes a pair of coil springs for installation on the rear axle, making it a practical choice for replacing worn components or refreshing the suspension system with matched springs.\u003c\/p\u003e\n\u003cp\u003eBilstein B12 (Special) suspension components are developed for drivers seeking enhanced suspension dynamics without sacrificing everyday usability. The springs are intended for compatible light-truck applications and should be installed according to the vehicle manufacturer’s service procedures. Verify the year, make, model, and suspension configuration before ordering to ensure proper fitment. This set fits select 2011–2014 Toyota 4Runner, 2011–2014 Toyota FJ Cruiser, and 2012–2014 Lexus GX460 models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This product may expose you to chemicals, including substances identified by California Proposition 65 as causing cancer or reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\n\u003cli\u003eSeries: B12 (Special)\u003c\/li\u003e\n\u003cli\u003ePart Number: 36-281824\u003c\/li\u003e\n\u003cli\u003ePart Type: Rear coil spring set\u003c\/li\u003e\n\u003cli\u003eKit Contents: Pair of coil springs\u003c\/li\u003e\n\u003cli\u003eSpring Design: Linear\u003c\/li\u003e\n\u003cli\u003eRear Main Spring Rate: 186 pounds per inch\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eApplication: Select Toyota 4Runner, Toyota FJ Cruiser, and Lexus GX460 models\u003c\/li\u003e\n\u003cli\u003eFitment: Select 2011–2014 Toyota 4Runner and Toyota FJ Cruiser models, plus select 2012–2014 Lexus GX460 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nRear Main Spring Rate (Lbs\/In): 186\u003cbr\u003e\nParttype: Coil Spring Set\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nFinish: Springs: Black\u003cbr\u003e\nSeries: B12 (Special)\u003cbr\u003e\nRear Main Spring Type: Linear\u003cbr\u003e\nKit Contents: Pair of coil springs\u003cbr\u003e\nAaiaid Part Number: BBGL36-281824\u003cbr\u003e\nPart Number: 36-281824\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771263680621,"sku":"36281824","price":258.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/36-281824_1.jpg?v=1792219891"},{"product_id":"bilstein-b6-performance-front-suspension-strut-assembly-35-110736","title":"Bilstein B6 Performance Front Suspension Strut Assembly 35-110736","description":"B6 Performance - Suspension Strut Assembly\n\u003cp\u003eUpgrade your vehicle’s handling and safety with the Bilstein B6 Performance Suspension Strut Assembly, part number 35-110736. Designed as a direct performance upgrade for original equipment dampers, this strut is engineered to work with factory springs, including the original series spring, without requiring a spring replacement. Its application-specific valving helps improve control, steering response, and overall driving confidence while preserving practical street performance.\u003cbr\u003eThe Bilstein B6 Performance strut uses a monotube internal design for consistent damping performance and efficient heat dissipation during demanding driving conditions. A fixed spring seat and bracket-style lower mount provide secure installation, while the stem-style upper mount supports compatibility with the specified applications. The assembly features Bilstein’s signature yellow-painted finish and is rigorously tested to meet or exceed original equipment quality standards. The boot is not included, so verify the installation requirements for your vehicle before ordering.\u003cbr\u003eThis Bilstein 35-110736 strut assembly is designed for select 2004–2013 Mazda 3, 2004–2005 Volvo S40, 2012–2013 Volvo C30, and 2012–2013 Volvo C70 applications. Confirm vehicle year, make, model, and position before purchase to ensure proper fitment. Extended travel is approximately 19.90 inches, while collapsed travel is approximately 15.55 inches. This product may require a specific installation orientation or additional components depending on the vehicle application. Prop 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 35-110736\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B6 Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select 2004–2013 Mazda 3, 2004–2005 Volvo S40, 2012–2013 Volvo C30, and 2012–2013 Volvo C70 models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance Upgrade: Improves handling and safety without requiring new springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube construction for consistent damping and heat management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included, fixed design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Bracket style\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem style\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: Approximately 19.90 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: Approximately 15.55 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 505.5\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nExtended Length (In): 19.90\u003cbr\u003e\nSegment: Tuning\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nSpring Seat Included: Yes - Fixed\u003cbr\u003e\nLower Mount Type: Bracket\u003cbr\u003e\nSeries: B6 Performance\u003cbr\u003e\nCollapsed Length (Mm): 395.0\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 15.55\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nAaiaid Part Number: BBGL35-110736\u003cbr\u003e\nPart Number: 35-110736\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nMazda 3  2004\u003cbr\u003e\nMazda 3  2005\u003cbr\u003e\nMazda 3  2006\u003cbr\u003e\nMazda 3  2007\u003cbr\u003e\nMazda 3  2008\u003cbr\u003e\nMazda 3  2009\u003cbr\u003e\nMazda 3  2010\u003cbr\u003e\nMazda 3  2011\u003cbr\u003e\nMazda 3  2012\u003cbr\u003e\nMazda 3  2013\u003cbr\u003e\nVolvo C30  2008\u003cbr\u003e\nVolvo C30  2009\u003cbr\u003e\nVolvo C30  2010\u003cbr\u003e\nVolvo C30  2011\u003cbr\u003e\nVolvo C30  2012\u003cbr\u003e\nVolvo C30  2013\u003cbr\u003e\nVolvo C70  2006\u003cbr\u003e\nVolvo C70  2007\u003cbr\u003e\nVolvo C70  2008\u003cbr\u003e\nVolvo C70  2009\u003cbr\u003e\nVolvo C70  2010\u003cbr\u003e\nVolvo C70  2011\u003cbr\u003e\nVolvo C70  2012\u003cbr\u003e\nVolvo C70  2013\u003cbr\u003e\nVolvo S40  2004\u003cbr\u003e\nVolvo S40  2005\u003cbr\u003e\nVolvo S40  2006\u003cbr\u003e\nVolvo S40  2007\u003cbr\u003e\nVolvo S40  2008\u003cbr\u003e\nVolvo S40  2009\u003cbr\u003e\nVolvo S40  2010\u003cbr\u003e\nVolvo S40  2011\u003cbr\u003e\nVolvo V50  2005\u003cbr\u003e\nVolvo V50  2006\u003cbr\u003e\nVolvo V50  2007\u003cbr\u003e\nVolvo V50  2008\u003cbr\u003e\nVolvo V50  2009\u003cbr\u003e\nVolvo V50  2010\u003cbr\u003e\nVolvo V50  2011","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771268694125,"sku":"35110736","price":311.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/35-110736_1.jpg?v=1792219910"},{"product_id":"bilstein-b6-performance-suspension-strut-assembly-35-041382-for-ford-mustang","title":"Bilstein B6 Performance Suspension Strut Assembly 35-041382 for Ford Mustang","description":"B6 Performance - Suspension Strut Assembly\n\u003cp\u003eUpgrade your vehicle’s handling with the Bilstein B6 Performance suspension strut assembly, part number 35-041382. Designed as a performance improvement over original equipment dampers, this Bilstein strut is engineered to work with the factory spring while providing application-specific valving for more controlled handling, improved stability, and enhanced driving confidence. It is designed for select 1994–2004 Ford Mustang applications.\u003cbr\u003eBilstein B6 Performance dampers use a high-pressure gas monotube design to deliver consistent damping performance during daily driving and spirited use. The monotube internal design helps maintain responsive control, while rigorous testing supports quality that meets or exceeds original equipment standards. The upper stem mount and lower bracket mount provide application-specific installation, and the assembly is finished with Bilstein’s signature yellow paint for easy identification.\u003cbr\u003eThis suspension strut includes blue bellows for added protection and does not include a spring seat, making it suitable for vehicles using the original spring and related factory components. As part of Bilstein’s B6 Performance tuning series, part number 35-041382 is a dependable choice for drivers seeking sharper suspension response without switching to aftermarket lowering springs. Verify vehicle fitment and suspension configuration before installation. Prop 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 35-041382\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B6 Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select 1994–2004 Ford Mustang models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Type: Suspension strut assembly\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Bracket\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot Included: Blue bellows\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat Included: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTechnology: High-pressure gas\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Application-specific valving for improved handling and control\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nCollapsed Length (In): 15.98\u003cbr\u003e\nLower Mount Type: Bracket\u003cbr\u003e\nExtended Length (In): 21.42\u003cbr\u003e\nSegment: Tuning\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nBoot Included: Blue Bellows\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nExtended Length (Mm): 544.0\u003cbr\u003e\nSeries: B6 Performance\u003cbr\u003e\nCollapsed Length (Mm): 406.0\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nAaiaid Part Number: BBGL35-041382\u003cbr\u003e\nPart Number: 35-041382\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord Mustang  1987\u003cbr\u003e\nFord Mustang  1988\u003cbr\u003e\nFord Mustang  1989\u003cbr\u003e\nFord Mustang  1990\u003cbr\u003e\nFord Mustang  1991\u003cbr\u003e\nFord Mustang  1992\u003cbr\u003e\nFord Mustang  1993\u003cbr\u003e\nFord Mustang  1994\u003cbr\u003e\nFord Mustang  1995\u003cbr\u003e\nFord Mustang  1996\u003cbr\u003e\nFord Mustang  1997\u003cbr\u003e\nFord Mustang  1998\u003cbr\u003e\nFord Mustang  1999\u003cbr\u003e\nFord Mustang  2000\u003cbr\u003e\nFord Mustang  2001\u003cbr\u003e\nFord Mustang  2002\u003cbr\u003e\nFord Mustang  2003\u003cbr\u003e\nFord Mustang  2004","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771269152877,"sku":"35041382","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/35-041382_1.jpg?v=1792219928"},{"product_id":"bilstein-b6-performance-strut-cartridge-34-181539-for-volvo-242-244-and-245","title":"Bilstein B6 Performance Strut Cartridge 34-181539 for Volvo 242, 244 and 245","description":"B6 Performance - Suspension Strut Cartridge\n\u003cp\u003eUpgrade your vehicle’s handling and safety with the Bilstein B6 Performance strut cartridge, part number 34-181539. Designed as a performance replacement for OE dampers, this shock absorber is engineered to work with the original factory spring, allowing you to improve suspension performance without replacing the spring. Its application-specific valving helps deliver controlled suspension response and a more confident driving experience while maintaining compatibility with the vehicle’s existing suspension setup.\u003cbr\u003eThe Bilstein B6 Performance uses a monotube internal design to provide consistent damping performance during demanding driving conditions. Each damper is rigorously tested to meet or exceed OE quality standards, helping ensure dependable operation and the renowned Bilstein level of durability. The yellow-painted finish provides the recognizable appearance associated with the B6 Performance series, while the included blue bellows boot helps protect the assembly from road debris and contamination.\u003cbr\u003eThis strut cartridge features a stem-style upper mount and base-cup lower mount. A spring seat is not included, so the original application components should be retained and verified before installation. The cartridge is designed for select Volvo applications, including 1975-1977 Volvo 245 models and 1976-1979 Volvo 242 and 244 models. Confirm vehicle fitment and suspension configuration before ordering. This product may contain a chemical known to the State of California to cause cancer or reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B6 Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 34-181539\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Performance upgrade for OE dampers using the factory spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Stem-style upper mount with base-cup lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Blue bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 18.56 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 23.58 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select 1975-1979 Volvo 242, 244 and 245 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nLower Mount Type: Base Cup\u003cbr\u003e\nSegment: Tuning\u003cbr\u003e\nCollapsed Length (In): 18.56\u003cbr\u003e\nSeries: B6 Performance\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nCollapsed Length (Mm): 471.5\u003cbr\u003e\nBoot Included: Blue Bellows\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nExtended Length (In): 23.58\u003cbr\u003e\nExtended Length (Mm): 599.0\u003cbr\u003e\nParttype: Strut Cartridge\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BBGL34-181539\u003cbr\u003e\nPart Number: 34-181539\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nVolvo 242  1975\u003cbr\u003e\nVolvo 242  1976\u003cbr\u003e\nVolvo 242  1977\u003cbr\u003e\nVolvo 242  1978\u003cbr\u003e\nVolvo 242  1979\u003cbr\u003e\nVolvo 242  1980\u003cbr\u003e\nVolvo 242  1981\u003cbr\u003e\nVolvo 242  1982\u003cbr\u003e\nVolvo 242  1983\u003cbr\u003e\nVolvo 242  1984\u003cbr\u003e\nVolvo 244  1975\u003cbr\u003e\nVolvo 244  1976\u003cbr\u003e\nVolvo 244  1977\u003cbr\u003e\nVolvo 244  1978\u003cbr\u003e\nVolvo 244  1979\u003cbr\u003e\nVolvo 244  1980\u003cbr\u003e\nVolvo 244  1981\u003cbr\u003e\nVolvo 244  1982\u003cbr\u003e\nVolvo 244  1983\u003cbr\u003e\nVolvo 244  1984\u003cbr\u003e\nVolvo 244  1985\u003cbr\u003e\nVolvo 244  1986\u003cbr\u003e\nVolvo 244  1987\u003cbr\u003e\nVolvo 244  1988\u003cbr\u003e\nVolvo 244  1989\u003cbr\u003e\nVolvo 245  1975\u003cbr\u003e\nVolvo 245  1976\u003cbr\u003e\nVolvo 245  1977\u003cbr\u003e\nVolvo 245  1978\u003cbr\u003e\nVolvo 245  1979\u003cbr\u003e\nVolvo 245  1980\u003cbr\u003e\nVolvo 245  1981\u003cbr\u003e\nVolvo 245  1982\u003cbr\u003e\nVolvo 245  1983\u003cbr\u003e\nVolvo 245  1984\u003cbr\u003e\nVolvo 245  1985\u003cbr\u003e\nVolvo 245  1986\u003cbr\u003e\nVolvo 245  1987\u003cbr\u003e\nVolvo 245  1988\u003cbr\u003e\nVolvo 245  1989\u003cbr\u003e\nVolvo 262  1976\u003cbr\u003e\nVolvo 262  1978\u003cbr\u003e\nVolvo 262  1979\u003cbr\u003e\nVolvo 262  1980\u003cbr\u003e\nVolvo 262  1981\u003cbr\u003e\nVolvo 264  1976\u003cbr\u003e\nVolvo 264  1977\u003cbr\u003e\nVolvo 264  1978\u003cbr\u003e\nVolvo 264  1979\u003cbr\u003e\nVolvo 264  1980\u003cbr\u003e\nVolvo 264  1981\u003cbr\u003e\nVolvo 264  1982\u003cbr\u003e\nVolvo 265  1976\u003cbr\u003e\nVolvo 265  1977\u003cbr\u003e\nVolvo 265  1978\u003cbr\u003e\nVolvo 265  1979\u003cbr\u003e\nVolvo 265  1980\u003cbr\u003e\nVolvo 265  1981","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771270889581,"sku":"34181539","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/34-181539_1.jpg?v=1792219946"},{"product_id":"bilstein-as2-r-series-triple-adjustable-suspension-shock-absorber-33-370101","title":"Bilstein AS2-R Series Triple-Adjustable Suspension Shock Absorber 33-370101","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eBilstein AS2-R Series Suspension Shock Absorber 33-370101 is engineered for demanding motorsports applications where precise damping control, low weight, and modular upgradeability are essential. This high-performance damper combines a clear-anodized aluminum body with a remote reservoir and tunable base-valve technology to provide a broad range of suspension tuning options. Its threaded body and coilover-compatible design allow the shock to be used with or without coilover hardware, helping racers configure suspension systems around specific vehicle and track requirements.\u003cbr\u003eThe AS2-R Series features triple-adjustable damping with independent rebound and high- and low-speed compression adjustment. This design enables detailed control of chassis response, traction, ride balance, and weight transfer across changing conditions. The monotube internal design uses a linear piston and a 46mm piston diameter for consistent damping performance, while the aluminum construction helps reduce unsprung weight. The remote reservoir supports increased oil capacity and improved heat management during extended competition use.\u003cbr\u003eBilstein part number 33-370101 includes a spring seat and uses 1\/2-inch Heim upper and lower mounts. Its threaded body screw-top coilover configuration is designed to maximize suspension travel and accommodate a wide range of spring and mounting combinations. The shock provides 3.56 inches of stroke with an extended length of 18.4 inches and a collapsed length of 14.84 inches. Pistons, piston bands, and Heim components are sold separately, allowing racers and builders to select upgrade combinations suited to their suspension setup. This shock absorber does not include a protective boot and carries a California Proposition 65 warning.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMotorsports-focused AS2-R Series suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-adjustable damping with rebound and high- and low-speed compression control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eClear-anodized aluminum body for lightweight performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with tunable base-valve technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design with linear piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThreaded body screw-top coilover configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e1\/2-inch Heim upper and lower mounting points\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e3.56-inch stroke for responsive suspension tuning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length of 18.4 inches and collapsed length of 14.84 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePistons, piston bands, and Heim components sold separately for modular upgrades\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtective boot not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSpring Hardware: B4-MKT-0001A00\u003cbr\u003e\nSpring Hardware 2: E4-MSG-0096A00\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (Mm): 376.9\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (In): 18.4\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nSpring Hardware 3: B4-MKT-0008A00\u003cbr\u003e\nExtended Length (Mm): 467.4\u003cbr\u003e\nStroke\/Travel Length (In): 3.56\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Linear\u003cbr\u003e\nStroke\/Travel Length (Mm): 90.4\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (In): 14.84\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Triple Adjustable - Rebound and High and Low Speed Compression\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-370101\u003cbr\u003e\nPart Number: 33-370101\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271053421,"sku":"33370101","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_82653775-5f10-4a24-a78e-5155fd5b6301.jpg?v=1792219963"},{"product_id":"bilstein-as2-r-series-motorsport-suspension-shock-absorber-33-366883","title":"Bilstein AS2-R Series Motorsport Suspension Shock Absorber 33-366883","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2-R Series Suspension Shock Absorber, part number 33-366883, is engineered for demanding motorsports applications where precise suspension control and flexible tuning are essential. Its aluminum-bodied remote reservoir uses tunable base valve technology and is paired with a lightweight AS2 Series modular shock body to help maximize suspension travel and damper performance. The threaded body is compatible with coilover hardware, making it suitable for a range of racing suspension configurations.\u003cbr\u003eThis Bilstein shock absorber features a monotube internal design, aluminum construction, a clear anodized finish, and a two-port linear piston. Upper and lower mounting points use 1\/2-inch heim joints for secure installation and reliable articulation under competition conditions. The included spring seat and compatible spring hardware support coilover-style setups, while the modular architecture allows racers to tailor upgrade combinations as needed. Pistons, piston bands, and heim components are sold separately, providing additional flexibility for custom suspension builds.\u003cbr\u003eThe AS2-R Series damper is valved with the LRB BVT BIL0 identifier and is designed for championship-level tuning applications. This version provides non-adjustable damping and does not include a protective boot. With an extended length of 25.92 inches and a collapsed length of 16.98 inches, it delivers a broad operating range for suspension travel. The Bilstein 33-366883 is a specialized motorsports shock absorber for builders and racers seeking a modular, high-performance damper platform with dependable construction and precise fitment requirements. Prop 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMotorsports-focused AS2-R Series suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein part number 33-366883\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum threaded body with clear anodized finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir with tunable base valve technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo-port linear piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e1\/2-inch heim upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoilover-compatible threaded body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14 mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46 mm piston diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length: 25.92 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length: 16.98 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving identifier: LRB BVT BIL0\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nValving Identifier: LRB BVT BIL0\u003cbr\u003e\nSpring Hardware 2: E4-MSG-0083A00\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Two Port Linear\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (In): 16.98\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nExtended Length (In): 25.92\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSpring Hardware: B4-MKT-0010A00\u003cbr\u003e\nExtended Length (Mm): 658.3\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (Mm): 431.3\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-366883\u003cbr\u003e\nPart Number: 33-366883\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271184493,"sku":"33366883","price":999.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_5dc46d12-51a2-4191-aa60-25f42248791f.jpg?v=1792219980"},{"product_id":"bilstein-as2-series-33-356990-non-adjustable-monotube-suspension-shock-absorber","title":"Bilstein AS2 Series 33-356990 Non-Adjustable Monotube Suspension Shock Absorber","description":"AS2 Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2 Series 33-356990 suspension shock absorber is engineered for motorsports applications where lightweight construction, precise setup, and future upgrade capability are important. Its modular aluminum design supports a rebuildable configuration, while the threaded body enables accurate ride-height adjustment in coilover applications. The monotube internal design provides consistent damping performance and efficient heat dissipation during demanding track use.\u003cbr\u003eThe shock absorber features a clear anodized aluminum body and a linear piston design intended for dependable operation in competition environments. Its non-adjustable damping configuration delivers a focused setup for racers who want the performance benefits of the AS2 platform without external damping adjustments. The screw-top coilover body is designed to work with compatible coilover components, while the spring seat is not included.\u003cbr\u003eThe Bilstein 33-356990 uses a clevis lower mount and a 1\/2-inch Teflon heim upper mount for motorsports installation flexibility. It provides 3.93 inches of stroke and is designed with a 46 mm piston and 14 mm shaft. Pistons, piston bands, heims, and other modular components are sold separately, allowing the system to be configured for specific racing requirements. This shock absorber is a suitable choice for racers seeking a durable, serviceable, and tunable suspension platform.\u003cbr\u003eWARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: AS2 Series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Motorsports suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Threaded body screw-top coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Clear anodized\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Type: Linear\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel: 3.93 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: 1\/2-inch Teflon heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Clevis\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRebuildable Design: Modular components support service and upgrade options\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 384.1\u003cbr\u003e\nLower Mount Type: Clevis\u003cbr\u003e\nStroke\/Travel Length (In): 3.93\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nSeries: AS2 Series\u003cbr\u003e\nPiston Type: Linear\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nStroke\/Travel Length (Mm): 100.0\u003cbr\u003e\nUpper Mount Type: 1\/2in teflon heim\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (Mm): 284.1\u003cbr\u003e\nCollapsed Length (In): 11.19\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nExtended Length (In): 15.12\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-356990\u003cbr\u003e\nPart Number: 33-356990\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271250029,"sku":"33356990","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_4aefd7db-f778-49ac-8b43-9fda7d9736b3.jpg?v=1792219993"},{"product_id":"bilstein-as2-r-series-triple-adjustable-suspension-shock-absorber-33-337999","title":"Bilstein AS2-R Series Triple-Adjustable Suspension Shock Absorber 33-337999","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2-R Series Suspension Shock Absorber, part number 33-337999, is engineered for demanding motorsports applications where precise damping control and suspension performance are essential. Its modular design combines a lightweight aluminum-bodied shock with a remote reservoir and tunable base valve technology, giving racers extensive control over vehicle response, grip, and suspension balance. The threaded body supports coilover configurations and includes a spring seat for flexible installation options.\u003cbr\u003eThe monotube internal design uses a 46mm piston and two-port linear piston configuration to provide consistent damping performance during intense use. Triple-adjustable damping allows independent tuning of rebound, high-speed compression, and low-speed compression characteristics. This broad adjustment range helps accommodate different track conditions, vehicle setups, driving styles, and suspension requirements while maximizing available travel. The clear-anodized aluminum body provides a durable, lightweight finish suited to competition environments.\u003cbr\u003eThis Bilstein AS2-R shock absorber features 1\/2-inch Heim upper and lower mounts, a 14mm shaft, and an 8.47-inch stroke. It extends to 24.38 inches and collapses to 15.91 inches, providing substantial suspension movement for performance applications. The unit is supplied without a protective boot, while pistons, piston bands, and Heim components are available separately to support future upgrades and custom damper configurations. Compatible spring hardware includes Bilstein part numbers B4-MKT-0001A00 and E4-MSG-0083A00. Professional installation and setup by a qualified suspension specialist are recommended.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: AS2-R Series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Motorsports suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: Triple adjustable for rebound, high-speed compression, and low-speed compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Threaded body screw-top coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote Reservoir: Aluminum reservoir with tunable base valve technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Type: Two-port linear\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: 1\/2-inch Heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: 1\/2-inch Heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel: 8.47 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 24.38 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 15.91 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Clear anodized\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Hardware: B4-MKT-0001A00 and E4-MSG-0083A00\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSpring Hardware: B4-MKT-0001A00\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (In): 15.91\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Triple Adjustable - Rebound and High and Low Speed Compression\u003cbr\u003e\nExtended Length (Mm): 619.3\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 24.38\u003cbr\u003e\nSpring Hardware 2: E4-MSG-0083A00\u003cbr\u003e\nStroke\/Travel Length (In): 8.47\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Two Port Linear\u003cbr\u003e\nStroke\/Travel Length (Mm): 215.1\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (Mm): 404.1\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-337999\u003cbr\u003e\nPart Number: 33-337999\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271348333,"sku":"33337999","price":1540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_57b7e18d-fc77-4af0-842a-fa0c390626e1.jpg?v=1792220010"},{"product_id":"bilstein-as2-r-series-triple-adjustable-motorsports-suspension-shock-absorber-33-337951","title":"Bilstein AS2-R Series Triple-Adjustable Motorsports Suspension Shock Absorber 33-337951","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2-R Series Suspension Shock Absorber, part number 33-337951, is engineered for demanding motorsports applications where precise damper control and reliable performance are essential. This premium shock absorber combines a lightweight aluminum AS2 modular shock body with a remote reservoir and tunable base valve technology, giving racers a broad range of setup and upgrade possibilities. Its threaded body design supports coilover configurations while also allowing use without coilover hardware, depending on the application.\u003cbr\u003eTriple-adjustable damping provides independent rebound, high-speed compression, and low-speed compression tuning to help optimize suspension behavior for changing track conditions, vehicle setups, and driving styles. The monotube internal design and digressive\/high-frequency linear IPP piston promote consistent damping response, improved heat management, and controlled suspension movement during high-performance driving. The 46 mm piston and 14 mm shaft are designed to deliver responsive control while maximizing available suspension travel.\u003cbr\u003eThe Bilstein 33-337951 features 1\/2-inch heim upper and lower mounts, a clear-anodized aluminum body, and a threaded screw-top coilover-style body design. It provides 9.12 inches of stroke travel, with an extended length of 26.26 inches and a collapsed length of 17.14 inches. A spring seat and protective boot are not included, allowing builders to select components that match their specific suspension requirements. Pistons, piston bands, and heim components are sold separately, supporting flexible configuration and future upgrades. This AS2-R Series shock absorber is a versatile choice for racers seeking championship-level tuning capability and modular performance from Bilstein.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: AS2-R Series motorsports suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: Triple adjustable for rebound, high-speed compression, and low-speed compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube construction for consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Lightweight aluminum with a clear-anodized finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Threaded body screw-top coilover design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Type: Digressive\/high-frequency linear IPP piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel Length: 9.12 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 26.26 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 17.14 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: 1\/2-inch heim upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 667.0\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (Mm): 435.4\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (In): 26.26\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nStroke\/Travel Length (In): 9.12\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Digressive\/HF Linear IPP\u003cbr\u003e\nStroke\/Travel Length (Mm): 234.7\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (In): 17.14\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Triple Adjustable - Rebound and High and Low Speed Compression\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-337951\u003cbr\u003e\nPart Number: 33-337951\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271643245,"sku":"33337951","price":1175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_2ccc8247-c81d-4a47-829b-a957732bf381.jpg?v=1792220033"},{"product_id":"bilstein-as2-r-series-triple-adjustable-motorsports-shock-absorber-33-337890","title":"Bilstein AS2-R Series Triple-Adjustable Motorsports Shock Absorber 33-337890","description":"AS2-R Series - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein AS2-R Series Suspension Shock Absorber, part number 33-337890, is engineered for demanding motorsports applications where precise suspension control and adaptable tuning are essential. Its aluminum-bodied remote reservoir uses tunable base valve technology and pairs with an AS2 Series aluminum modular shock body to provide a versatile platform for racers and performance builders. The threaded body design supports coilover applications and can also be used without coilover hardware, helping accommodate a wide range of suspension configurations.\u003cbr\u003eThis Bilstein shock features a monotube internal design, linear piston, clear-anodized aluminum body, and triple-adjustable damping for independent rebound plus high- and low-speed compression control. These adjustment options allow suspension tuning for track conditions, vehicle setup, and driving style. The shock provides 4.79 inches of stroke and extends to 19.17 inches, while the 14 mm shaft and 46 mm piston support responsive damping performance and consistent control during demanding use.\u003cbr\u003eThe AS2-R Series damper includes a spring seat and is configured with 1\/2-inch Heim upper and lower mounts. Spring hardware options include Bilstein components B4-MKT-0001A00 and E4-MSG-0083A00. Pistons, piston bands, and Heim components are sold separately, allowing builders to select upgrade combinations that match their tuning requirements. With modular construction, substantial adjustment capability, and a design focused on maximizing suspension travel, Bilstein part number 33-337890 is a strong choice for competition vehicles requiring flexible, high-performance damper tuning. Boot is not included. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: AS2-R Series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Motorsports suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping Adjustment: Triple adjustable for rebound and high- and low-speed compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Threaded-body screw-top coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Clear anodized\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Type: Linear\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel: 4.79 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 14.38 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 19.17 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: 1\/2-inch Heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 1\/2-inch Heim\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Hardware: B4-MKT-0001A00\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdditional Spring Hardware: E4-MSG-0083A00\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-337890\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSpring Hardware: B4-MKT-0001A00\u003cbr\u003e\nLower Mount Type: 1\/2in Heim\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: AS2-R Series\u003cbr\u003e\nSegment: Motorsports\u003cbr\u003e\nUpper Mount Type: 1\/2in Heim\u003cbr\u003e\nCollapsed Length (In): 14.38\u003cbr\u003e\nBody Design: Threaded Body Screw Top (Coilover)\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Triple Adjustable - Rebound and High and Low Speed Compression\u003cbr\u003e\nExtended Length (Mm): 486.9\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nSpring Hardware 2: E4-MSG-0083A00\u003cbr\u003e\nStroke\/Travel Length (In): 4.79\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nPiston Type: Linear\u003cbr\u003e\nStroke\/Travel Length (Mm): 121.7\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nCollapsed Length (Mm): 365.3\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nExtended Length (In): 19.17\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL33-337890\u003cbr\u003e\nPart Number: 33-337890\u003cbr\u003e\nBrand Aaia: BBGL","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771271708781,"sku":"33337890","price":1125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/image_generic_02_bd608987-ed13-4057-bd9b-94dc7c3188d7.jpg?v=1792220044"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-318950-for-ford-f-150","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-318950 for Ford F-150","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 5100 suspension shock absorber, part number 33-318950. Designed as a direct-fit solution for select 2015–2024 Ford F-150 applications, this shock absorber is engineered to improve ride quality, handling, and comfort while maintaining dependable performance on changing road surfaces. Its application-specific tuning helps provide balanced control for light-truck use.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design with a velocity-sensitive, digressive piston. This configuration responds quickly to varying road conditions and helps deliver consistent, fade-free damping in demanding driving environments. The smooth-body construction, zinc-plated finish, and non-adjustable damping make this shock absorber a durable replacement or suspension upgrade for trucks requiring reliable control without external adjustment.\u003cbr\u003eThis Bilstein shock absorber features a 14mm shaft, 12mm eye mounts at the upper and lower attachment points, and a black bellows boot for added shaft protection. It has a travel length of 11.25 inches, a collapsed length of 18.22 inches, and an extended length of 29.47 inches. The shock is designed without a reservoir or spring seat and is intended for lifted truck applications. Verify vehicle configuration and suspension requirements before installation. Fits 2015–2024 Ford F-150 models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-318950\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 5100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension shock absorber for select lifted Ford F-150 trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: 12mm eye mount on upper and lower ends\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel Length: 11.25 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 18.22 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 29.47 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: 2015–2024 Ford F-150\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 11.25\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 285.8\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 29.47\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 18.22\u003cbr\u003e\nUpper Mount Type: Eye 12mm\u003cbr\u003e\nCollapsed Length (Mm): 462.8\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nExtended Length (Mm): 748.5\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nAaiaid Part Number: BBGL33-318950\u003cbr\u003e\nPart Number: 33-318950\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-150  2015\u003cbr\u003e\nFord F-150  2016\u003cbr\u003e\nFord F-150  2017\u003cbr\u003e\nFord F-150  2018\u003cbr\u003e\nFord F-150  2019\u003cbr\u003e\nFord F-150  2020\u003cbr\u003e\nFord F-150  2021\u003cbr\u003e\nFord F-150  2022\u003cbr\u003e\nFord F-150  2023\u003cbr\u003e\nFord F-150  2024\u003cbr\u003e\nFord F-150  2025\u003cbr\u003e\nFord F-150  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771272036461,"sku":"33318950","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-318950_2.jpg?v=1792220062"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-313146","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-313146","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck or SUV with the Bilstein B8 5100 suspension shock absorber, part number 33-313146. Designed as a direct-fit replacement for select Toyota FJ Cruiser, Toyota 4Runner, and Lexus GX460 applications, this Bilstein shock absorber is engineered to improve ride quality, handling, and comfort while maintaining consistent performance on changing road surfaces. Its application-specific tuning helps provide controlled suspension response for light-truck use.\u003cbr\u003eThe B8 5100 features a 46mm monotube design that delivers consistent, fade-resistant damping in demanding driving conditions. A velocity-sensitive, digressive piston responds quickly to road variations, helping the shock absorber maintain tire contact and suspension control over rough pavement, uneven terrain, and changing loads. The smooth-body construction and non-adjustable damping design provide dependable operation without requiring manual tuning.\u003cbr\u003eThis Bilstein shock absorber uses a zinc-plated finish for added durability and includes a black bellows boot to help protect the shaft from road debris. It is configured with an eye-style lower mount and stem-style upper mount for direct installation on compatible applications. The shock has a 14mm shaft, an approximately 14.91-inch collapsed length, an approximately 23.03-inch extended length, and 8.12 inches of suspension travel. It does not include a reservoir or spring seat. Fitment includes select 2011–2014 Toyota FJ Cruiser models, 2012–2014 Toyota 4Runner models, and 2012–2014 Lexus GX460 models. Verify vehicle configuration and suspension lift requirements before ordering. This product contains a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series suspension shock absorber for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 33-313146\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning helps improve ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish for durable corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style lower mount with stem-style upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApproximately 14.91-inch collapsed length and 23.03-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.12 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir or spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.3mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 14.91\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nCollapsed Length (Mm): 378.8\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nExtended Length (Mm): 585.0\u003cbr\u003e\nStroke\/Travel Length (In): 8.12\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 206.3\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 23.03\u003cbr\u003e\nAaiaid Part Number: BBGL33-313146\u003cbr\u003e\nPart Number: 33-313146\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771273543789,"sku":"33313146","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-313146_1.jpg?v=1792220080"},{"product_id":"bilstein-b8-5100-suspension-shock-absorber-33-306254-for-ford-f-250-and-f-350-super-duty","title":"Bilstein B8 5100 Suspension Shock Absorber 33-306254 for Ford F-250 and F-350 Super Duty","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 5100 suspension shock absorber, part number 33-306254. Designed as a direct-fit solution for select Ford F-250 and F-350 Super Duty applications, this light-truck shock absorber is vehicle-specifically tuned to support improved ride quality, handling, and comfort. It is suitable for 2017–2021 Ford Super Duty models listed below and provides dependable performance for demanding road and hauling conditions.\u003cbr\u003eThe B8 5100 uses a monotube internal design with a smooth-body construction to provide consistent, fade-resistant damping. Its velocity-sensitive, digressive piston responds quickly to changing road surfaces while helping maintain controlled suspension movement. The zinc-plated finish supports durability, while the included black bellows boot helps protect the shock shaft from dirt and road debris. This non-adjustable shock is engineered for reliable operation without the need for external damping adjustments.\u003cbr\u003eInstallation uses an eye-style upper mount with a 16 mm opening and an eye-style lower mount with a 14.1 mm opening. The shock features a 14 mm shaft and delivers 11.52 inches of stroke for suspension systems requiring a 20.08-inch collapsed length and 31.60-inch extended length. It does not include a spring seat or reservoir. This Bilstein B8 5100 shock absorber fits 2017–2021 Ford F-250 Super Duty and F-350 Super Duty models, subject to the vehicle's suspension configuration and application requirements. Professional installation is recommended. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit Bilstein B8 5100 shock absorber for select lifted Ford F-250 and F-350 Super Duty trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific tuning supports improved ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body construction with durable zinc-plated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no external adjustment required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included for added shaft protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper eye mount with 16 mm opening\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower eye mount with 14.1 mm opening\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14 mm shaft diameter and 11.52 inches of stroke\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e20.08-inch collapsed length and 31.60-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir and no spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2017–2021 Ford F-250 Super Duty and F-350 Super Duty applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 20.08\u003cbr\u003e\nUpper Mount Type: Eye 16mm\u003cbr\u003e\nCollapsed Length (Mm): 510.0\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nStroke\/Travel Length (In): 11.52\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 292.6\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nExtended Length (Mm): 802.7\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 31.60\u003cbr\u003e\nAaiaid Part Number: BBGL33-306254\u003cbr\u003e\nPart Number: 33-306254\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-250 Super Duty  2017\u003cbr\u003e\nFord F-250 Super Duty  2018\u003cbr\u003e\nFord F-250 Super Duty  2019\u003cbr\u003e\nFord F-250 Super Duty  2020\u003cbr\u003e\nFord F-250 Super Duty  2021\u003cbr\u003e\nFord F-250 Super Duty  2022\u003cbr\u003e\nFord F-250 Super Duty  2023\u003cbr\u003e\nFord F-250 Super Duty  2024\u003cbr\u003e\nFord F-250 Super Duty  2025\u003cbr\u003e\nFord F-250 Super Duty  2026\u003cbr\u003e\nFord F-350 Super Duty  2017\u003cbr\u003e\nFord F-350 Super Duty  2018\u003cbr\u003e\nFord F-350 Super Duty  2019\u003cbr\u003e\nFord F-350 Super Duty  2020\u003cbr\u003e\nFord F-350 Super Duty  2021\u003cbr\u003e\nFord F-350 Super Duty  2022\u003cbr\u003e\nFord F-350 Super Duty  2023\u003cbr\u003e\nFord F-350 Super Duty  2024\u003cbr\u003e\nFord F-350 Super Duty  2025\u003cbr\u003e\nFord F-350 Super Duty  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771273707629,"sku":"33306254","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-306254_1.jpg?v=1792220102"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-305288-for-2020-2026-jeep-gladiator","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-305288 for 2020-2026 Jeep Gladiator","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 5100 suspension shock absorber, part number 33-305288. Designed as a direct-fit solution for the 2020-2026 Jeep Gladiator, this light-truck shock absorber is tuned for the specific application to help improve ride quality, handling, and comfort on and off the road. The B8 5100 series is engineered for lifted vehicles and provides dependable control across changing driving conditions.\u003cbr\u003eThe 46mm monotube design helps deliver consistent, fade-free performance by maintaining efficient heat dissipation during demanding use. A velocity-sensitive, digressive piston responds rapidly to changing road surfaces, providing controlled damping over both small irregularities and larger impacts. This design helps the shock absorber maintain stable performance while supporting improved handling and a more composed ride.\u003cbr\u003eThe Bilstein B8 5100 features a smooth-body construction, zinc-plated finish, and non-adjustable damping calibrated for the Jeep Gladiator application. Eye-style upper and lower mounts support a direct-fit installation, while the included black bellows boot helps protect the shaft from road debris. The shock absorber has an extended length of 28.41 inches, a collapsed length of 17.91 inches, and 10.50 inches of stroke. It does not include a reservoir, spring seat, or coilover hardware. This product is intended for compatible lifted applications and carries a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit suspension shock absorber for 2020-2026 Jeep Gladiator models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 light-truck shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-305288\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: 46mm monotube construction for consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Design: Velocity-sensitive, digressive piston that adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable damping tuned for the specific vehicle application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Durable zinc-plated exterior\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Included black bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTravel: 10.50 inches of shock stroke\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 28.41 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 17.91 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: No external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 721.7\u003cbr\u003e\nStroke\/Travel Length (In): 10.50\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 266.7\u003cbr\u003e\nCollapsed Length (Mm): 455.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 17.91\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 28.41\u003cbr\u003e\nAaiaid Part Number: BBGL33-305288\u003cbr\u003e\nPart Number: 33-305288\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Gladiator  2020\u003cbr\u003e\nJeep Gladiator  2021\u003cbr\u003e\nJeep Gladiator  2022\u003cbr\u003e\nJeep Gladiator  2023\u003cbr\u003e\nJeep Gladiator  2024\u003cbr\u003e\nJeep Gladiator  2025\u003cbr\u003e\nJeep Gladiator  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771273805933,"sku":"33305288","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-305288_1.jpg?v=1792220120"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-305226-for-jeep-gladiator","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-305226 for Jeep Gladiator","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted Jeep Gladiator with the Bilstein B8 5100 suspension shock absorber, part number 33-305226. Designed as a direct-fit solution for select 2020–2026 Jeep Gladiator applications, this light-truck shock absorber is engineered to improve ride quality, handling, and driving comfort on changing road surfaces. Its zinc-plated finish provides durable protection for long-term use.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design to deliver consistent, fade-free performance under demanding driving conditions. A velocity-sensitive, digressive piston responds to variations in road input, helping maintain controlled suspension movement both on and off the road. Application-specific tuning ensures the shock absorber is matched to the vehicle for balanced performance and dependable handling.\u003cbr\u003eThis non-adjustable, smooth-body shock absorber features eye-style upper and lower mounts, a black bellows boot, and a 14mm shaft. It provides approximately 11.05 inches of stroke and is designed without a reservoir or spring seat. The direct-fit configuration supports straightforward installation when used with the appropriate vehicle suspension setup. Verify vehicle application and suspension lift requirements before ordering.\u003cbr\u003eFeature: 46mm monotube internal design for consistent, fade-free performance\u003cbr\u003eFeature: Velocity-sensitive, digressive piston for responsive damping control\u003cbr\u003eFeature: Application-specific tuning for improved ride quality and handling\u003cbr\u003eFeature: Direct-fit design for select 2020–2026 Jeep Gladiator models\u003cbr\u003eFeature: Eye-style upper and lower mounts with 14mm shaft\u003cbr\u003eFeature: Zinc-plated smooth body with black bellows boot\u003cbr\u003eFeature: Non-adjustable damping with no external reservoir or spring seat\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube internal design for consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston for responsive damping control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning for improved ride quality and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design for select 2020–2026 Jeep Gladiator models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts with 14mm shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated smooth body with black bellows boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no external reservoir or spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.1mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 18.33\u003cbr\u003e\nUpper Mount Type: Eye 14.1mm\u003cbr\u003e\nCollapsed Length (Mm): 465.5\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nStroke\/Travel Length (In): 11.05\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 280.7\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nExtended Length (Mm): 746.2\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 29.38\u003cbr\u003e\nAaiaid Part Number: BBGL33-305226\u003cbr\u003e\nPart Number: 33-305226\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Gladiator  2020\u003cbr\u003e\nJeep Gladiator  2021\u003cbr\u003e\nJeep Gladiator  2022\u003cbr\u003e\nJeep Gladiator  2023\u003cbr\u003e\nJeep Gladiator  2024\u003cbr\u003e\nJeep Gladiator  2025\u003cbr\u003e\nJeep Gladiator  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771274461293,"sku":"33305226","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-305226_1.jpg?v=1792220137"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-305219-for-2020-2026-jeep-gladiator","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-305219 for 2020-2026 Jeep Gladiator","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your Jeep Gladiator with the Bilstein B8 5100 suspension shock absorber, part number 33-305219. Designed as a direct-fit solution for lifted trucks and SUVs, this shock absorber is engineered to improve ride quality, handling, and driving comfort. It fits the 2020, 2021, 2022, 2023, 2024, 2025, and 2026 Jeep Gladiator, providing application-specific tuning for dependable performance on and off the road.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design that helps deliver consistent, fade-free damping in changing driving conditions. Its velocity-sensitive, digressive piston responds quickly to variations in the road surface, helping maintain tire contact and controlled suspension movement. The smooth-body construction is zinc plated for durability, while the black bellows boot helps protect the shock shaft from dirt and debris.\u003cbr\u003eThis Bilstein shock absorber features non-adjustable damping, no external reservoir, and eye-style upper and lower mounts. It has a 14mm shaft, a 46mm piston, and a suspension travel range of 9.81 inches. The unit is designed for lifted-vehicle applications and does not include a spring seat. A Prop 65 warning applies: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov.\u003cbr\u003eFeature: Bilstein B8 5100 series suspension shock absorber\u003cbr\u003eFeature: Direct-fit application for 2020-2026 Jeep Gladiator\u003cbr\u003eFeature: 46mm monotube construction for consistent, fade-free performance\u003cbr\u003eFeature: Velocity-sensitive, digressive piston for responsive damping\u003cbr\u003eFeature: Non-adjustable damping with smooth-body design\u003cbr\u003eFeature: Zinc-plated finish for added corrosion resistance\u003cbr\u003eFeature: Black bellows boot included\u003cbr\u003eFeature: Eye-style upper and lower mounts\u003cbr\u003eFeature: No external reservoir and no spring seat\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit application for 2020-2026 Jeep Gladiator\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube construction for consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston for responsive damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with smooth-body design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish for added corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir and no spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 26.88\u003cbr\u003e\nExtended Length (Mm): 682.7\u003cbr\u003e\nStroke\/Travel Length (In): 9.81\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 249.2\u003cbr\u003e\nCollapsed Length (Mm): 433.5\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nLower Mount Type: Eye 12.8mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 17.07\u003cbr\u003e\nUpper Mount Type: Eye 12.8mm\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nAaiaid Part Number: BBGL33-305219\u003cbr\u003e\nPart Number: 33-305219\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Gladiator  2020\u003cbr\u003e\nJeep Gladiator  2021\u003cbr\u003e\nJeep Gladiator  2022\u003cbr\u003e\nJeep Gladiator  2023\u003cbr\u003e\nJeep Gladiator  2024\u003cbr\u003e\nJeep Gladiator  2025\u003cbr\u003e\nJeep Gladiator  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771274559597,"sku":"33305219","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-305219_1.jpg?v=1792220155"},{"product_id":"bilstein-b8-5100-steering-damper-33-292984-for-jeep-wrangler-and-gladiator","title":"Bilstein B8 5100 Steering Damper 33-292984 for Jeep Wrangler and Gladiator","description":"B8 5100 (Steering Damper)\n\u003cp\u003eUpgrade steering control with the Bilstein B8 5100 Steering Damper, part number 33-292984. Designed for light trucks and SUVs, this steering stabilizer helps dampen minute steering movements and reduce vibrations that can occur during everyday driving, rough-road travel, and off-road use. It is engineered as an upgrade to the factory steering damper and helps provide improved steering response, handling, and overall ride comfort.\u003cbr\u003eThe Bilstein B8 5100 steering damper uses a monotube internal design with a smooth-body construction for consistent damping performance. Its zinc-plated finish helps resist harsh environmental conditions, while the eye-style upper and lower mounts support a secure installation when matched with the appropriate vehicle hardware. The damper does not include a reservoir, boot, or spring seat, making it a straightforward replacement or upgrade for compatible applications.\u003cbr\u003eWith a 7.43-inch stroke and a travel range from 13.50 inches collapsed to 20.93 inches extended, the Bilstein B8 5100 Steering Damper is designed to work with the suspension and steering geometry of select Jeep models. It matches other products in the B8 5100 series for a cohesive suspension upgrade. This steering damper fits select 2018-2023 Jeep Wrangler models and 2020-2023 Jeep Gladiator models. Professional installation is recommended to help ensure proper fitment and steering performance. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 Steering Damper\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 33-292984\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Type: Steering Stabilizer\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select 2018-2023 Jeep Wrangler and 2020-2023 Jeep Gladiator models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: 46 mm inside diameter smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated for resistance to harsh elements\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Eye-style upper and lower mounts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: 0.50-inch eye mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 11 mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke\/Travel: 7.43 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 13.50 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 20.93 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot Included: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat Included: No\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nStroke\/Travel Length (In): 7.43\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nSeries: B8 5100 (Steering Damper)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Eye 12.7mm\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Steering Stabilizer\u003cbr\u003e\nCollapsed Length (Mm): 343.0\u003cbr\u003e\nShaft Diameter: 11mm\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nExtended Length (Mm): 531.5\u003cbr\u003e\nLower Mount Type: Eye 12.7mm\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nBody Design: 46mm ID Smooth Body (Non-Coilover)\u003cbr\u003e\nPosition: Steering Damper\u003cbr\u003e\nStroke\/Travel Length (Mm): 188.7\u003cbr\u003e\nCollapsed Length (In): 13.50\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 20.93\u003cbr\u003e\nAaiaid Part Number: BBGL33-292984\u003cbr\u003e\nPart Number: 33-292984\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Gladiator  2020\u003cbr\u003e\nJeep Gladiator  2021\u003cbr\u003e\nJeep Gladiator  2022\u003cbr\u003e\nJeep Gladiator  2023\u003cbr\u003e\nJeep Gladiator  2024\u003cbr\u003e\nJeep Gladiator  2025\u003cbr\u003e\nJeep Gladiator  2026\u003cbr\u003e\nJeep Wrangler  2018\u003cbr\u003e\nJeep Wrangler  2019\u003cbr\u003e\nJeep Wrangler  2020\u003cbr\u003e\nJeep Wrangler  2021\u003cbr\u003e\nJeep Wrangler  2022\u003cbr\u003e\nJeep Wrangler  2023\u003cbr\u003e\nJeep Wrangler  2024\u003cbr\u003e\nJeep Wrangler  2025\u003cbr\u003e\nJeep Wrangler  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771274625133,"sku":"33292984","price":121.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-292984_1.jpg?v=1792220167"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/collections\/ftl5207-beauty-life.jpg?v=1792293915","url":"https:\/\/truckarmy.com\/collections\/suspension.oembed?page=2","provider":"Truck Army","version":"1.0","type":"link"}