{"title":"Toyota 4Runner Shocks","description":"\u003cp\u003eNew shocks are the quickest way to tighten up a tired ride on your Toyota 4Runner, and a must after a lift.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift height:\u003c\/strong\u003e shocks are sold for stock height or a lift range, so match yours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear\u003c\/strong\u003e are different parts and most are sold individually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrivetrain and trim:\u003c\/strong\u003e 2WD, 4WD, KDSS and off-road trims can take different shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelect your vehicle in the vehicle bar above to see only parts that fit.\u003c\/p\u003e","products":[{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-33-313146","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 33-313146","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck or SUV with the Bilstein B8 5100 suspension shock absorber, part number 33-313146. Designed as a direct-fit replacement for select Toyota FJ Cruiser, Toyota 4Runner, and Lexus GX460 applications, this Bilstein shock absorber is engineered to improve ride quality, handling, and comfort while maintaining consistent performance on changing road surfaces. Its application-specific tuning helps provide controlled suspension response for light-truck use.\u003cbr\u003eThe B8 5100 features a 46mm monotube design that delivers consistent, fade-resistant damping in demanding driving conditions. A velocity-sensitive, digressive piston responds quickly to road variations, helping the shock absorber maintain tire contact and suspension control over rough pavement, uneven terrain, and changing loads. The smooth-body construction and non-adjustable damping design provide dependable operation without requiring manual tuning.\u003cbr\u003eThis Bilstein shock absorber uses a zinc-plated finish for added durability and includes a black bellows boot to help protect the shaft from road debris. It is configured with an eye-style lower mount and stem-style upper mount for direct installation on compatible applications. The shock has a 14mm shaft, an approximately 14.91-inch collapsed length, an approximately 23.03-inch extended length, and 8.12 inches of suspension travel. It does not include a reservoir or spring seat. Fitment includes select 2011–2014 Toyota FJ Cruiser models, 2012–2014 Toyota 4Runner models, and 2012–2014 Lexus GX460 models. Verify vehicle configuration and suspension lift requirements before ordering. This product contains a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series suspension shock absorber for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 33-313146\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning helps improve ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish for durable corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style lower mount with stem-style upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApproximately 14.91-inch collapsed length and 23.03-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.12 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir or spring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.3mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nCollapsed Length (In): 14.91\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nCollapsed Length (Mm): 378.8\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nExtended Length (Mm): 585.0\u003cbr\u003e\nStroke\/Travel Length (In): 8.12\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 206.3\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (In): 23.03\u003cbr\u003e\nAaiaid Part Number: BBGL33-313146\u003cbr\u003e\nPart Number: 33-313146\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771273543789,"sku":"33313146","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/33-313146_1.jpg?v=1792220080"},{"product_id":"bilstein-b8-8100-bypass-suspension-shock-absorber-25-326376","title":"Bilstein B8 8100 Bypass Suspension Shock Absorber 25-326376","description":"B8 8100 (Bypass) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your light truck or SUV suspension with the Bilstein B8 8100 Bypass shock absorber, part number 25-326376. Designed as a direct-fit replacement for select Toyota 4Runner and Lexus GX460 applications, this motorsports-inspired damper delivers position-sensitive performance, improved ride control, and dependable bottom-out resistance. Its dual-tube external bypass design provides independent adjustment for compression and rebound, allowing drivers to fine-tune damping behavior for changing terrain and driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Bilstein B8 8100 uses Incremental Flow bypass adjusters with click-adjuster knobs for precise, repeatable tuning. A bottom hose and remote reservoir exit port help maintain consistent compression control through the full suspension cycle, while the included bolt-on anodized aluminum chassis mount supports a straightforward reservoir installation. The EVO Grey finish provides a durable, professional appearance, and the bypass body design is engineered for suspension performance rather than coilover use.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein shock features double-adjustable compression and rebound damping, a monotube internal design, a 60mm piston, and an 18mm shaft. It uses a stem upper mount and 19.2mm eye lower mount, with an extended length of 24.09 inches and a collapsed length of 14.72 inches. The reservoir-equipped design is suitable for enthusiasts seeking greater control, comfort, and tuning flexibility on light-truck and SUV platforms. Verify vehicle configuration and suspension compatibility before installation.\u003c\/p\u003e\n\u003cp\u003eCompatible applications include select 2012–2016 Lexus GX460 models and 2012–2016 Toyota 4Runner models. This product does not include a boot or spring seat. Installation should be performed using appropriate tools and procedures, with all mounting hardware properly secured. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDual-tube external bypass design provides position-sensitive damping\u003c\/li\u003e\n\u003cli\u003eIndependent compression and rebound adjustment with click-adjuster knobs\u003c\/li\u003e\n\u003cli\u003eIncremental Flow bypass adjusters support precise suspension tuning\u003c\/li\u003e\n\u003cli\u003eRemote reservoir with bottom hose and reservoir exit port improves compression control\u003c\/li\u003e\n\u003cli\u003eBolt-on anodized aluminum chassis mount included for reservoir installation\u003c\/li\u003e\n\u003cli\u003eMonotube internal design with a 60mm piston and 18mm shaft\u003c\/li\u003e\n\u003cli\u003eBypass body design for light trucks and SUVs; not a coilover\u003c\/li\u003e\n\u003cli\u003eEVO Grey finish offers a durable, professional appearance\u003c\/li\u003e\n\u003cli\u003eStem upper mount and 19.2mm eye lower mount\u003c\/li\u003e\n\u003cli\u003eExtended length of 24.09 inches and collapsed length of 14.72 inches\u003c\/li\u003e\n\u003cli\u003eDirect-fit applications for select Lexus GX460 and Toyota 4Runner models from 2012 through 2016\u003c\/li\u003e\n\u003cli\u003eBoot and spring seat are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.2mm\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nSeries: B8 8100 (Bypass)\u003cbr\u003e\nCollapsed Length (Mm): 374.0\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Double Adjustable Compression and Rebound with Click Adjuster Knobs\u003cbr\u003e\nBody Design: Bypass Body (Non-Coilover)\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 612.0\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (In): 24.09\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nCollapsed Length (In): 14.72\u003cbr\u003e\nAaiaid Part Number: BBGL25-326376\u003cbr\u003e\nPart Number: 25-326376\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771387052141,"sku":"25326376","price":1282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-326376_1.jpg?v=1792221784"},{"product_id":"bilstein-b8-8100-bypass-suspension-shock-absorber-25-326369","title":"Bilstein B8 8100 Bypass Suspension Shock Absorber 25-326369","description":"B8 8100 (Bypass) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your light truck or SUV suspension with the Bilstein B8 8100 Bypass suspension shock absorber, part number 25-326369. Designed as a direct-fit damper, this motorsports-inspired shock uses a dual-tube external bypass design to provide position-sensitive damping throughout the suspension cycle. Independent compression and rebound adjustment allows drivers to fine-tune ride control for changing terrain, vehicle loads, and driving conditions. The EVO Grey finish delivers a durable, professional appearance suited to demanding off-road and performance applications.\u003cbr\u003eThe Bilstein B8 8100 features Incremental Flow bypass adjusters with click-adjuster knobs for precise, repeatable changes. Its bottom hose and remote reservoir exit port help increase compression control through the full range of suspension travel, while the included bolt-on anodized aluminum chassis mount supports a clean and secure reservoir installation. The bypass body is non-coilover, and the shock is configured with a stem upper mount and 19.2-millimeter eye lower mount for compatible applications.\u003cbr\u003eEngineered for improved ride comfort and bottom-out control, this Bilstein shock absorber combines a monotube internal design with double-adjustable compression and rebound damping. It is suitable for select Toyota 4Runner and Lexus GX460 applications from 2012 through 2016. Verify vehicle fitment and suspension configuration before ordering. The shock has a 14.72-inch collapsed length, a 24.09-inch extended length, an 18-millimeter shaft, and a 60-millimeter piston. Prop 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Bilstein\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 25-326369\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B8 8100 Bypass\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Light truck and SUV suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Dual-tube external bypass with position-sensitive damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping Adjustment: Double-adjustable compression and rebound with click-adjuster knobs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Non-coilover bypass body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Remote reservoir with bolt-on anodized aluminum chassis mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 19.2-millimeter eye\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60 millimeters\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 18 millimeters\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 14.72 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 24.09 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Grey\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2012-2016 Toyota 4Runner and Lexus GX460 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.2mm\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nSeries: B8 8100 (Bypass)\u003cbr\u003e\nCollapsed Length (Mm): 374.0\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Double Adjustable Compression and Rebound with Click Adjuster Knobs\u003cbr\u003e\nBody Design: Bypass Body (Non-Coilover)\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 612.0\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (In): 24.09\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nCollapsed Length (In): 14.72\u003cbr\u003e\nAaiaid Part Number: BBGL25-326369\u003cbr\u003e\nPart Number: 25-326369\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771387281517,"sku":"25326369","price":1282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-326369_3.jpg?v=1792221813"},{"product_id":"bilstein-b8-5160-remote-reservoir-suspension-shock-absorber-25-325096","title":"Bilstein B8 5160 Remote Reservoir Suspension Shock Absorber 25-325096","description":"B8 5160 - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein B8 5160 remote reservoir suspension shock absorber, part number 25-325096, is engineered as a direct-fit upgrade for lifted trucks and SUVs. Its remote reservoir increases cooling capacity and available wheel travel, helping maintain consistent performance during demanding off-road driving. The shock is designed for select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications, providing vehicle-specific damping for improved control and durability.\u003cbr\u003eBuilt with a 46mm monotube design, the Bilstein B8 5160 delivers consistent, fade-resistant performance across changing terrain and operating conditions. Its velocity-sensitive digressive valving is tuned for the specific application, allowing the shock to respond quickly to surface changes while maintaining controlled handling. The smooth-body construction, zinc-plated finish, black bellows boot, and non-adjustable damping design provide dependable protection and long-term function without the complexity of a coilover system.\u003cbr\u003eInstallation features include a 360-degree swivel banjo hose fitting, upper stem mount, lower eye mount, and included billet reservoir clamp for a clean, low-profile setup where applicable. With 9 inches of stroke and a remote reservoir configuration, this Bilstein shock absorber helps increase suspension travel and off-road capability. It is a practical choice for drivers seeking enhanced suspension performance in harsh environments while retaining a direct-fit design. Professional installation is recommended to verify application compatibility and mounting requirements.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir increases cooling capacity and suspension wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive valving is tuned for the specific application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e9-inch stroke supports increased suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBillet reservoir clamp is included for a secure, low-profile installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e360-degree swivel banjo hose fitting simplifies hose positioning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper stem mount and lower 19.25mm eye mount support direct-fit installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction with zinc-plated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot helps protect the shock shaft from dirt and debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping is calibrated for dependable application-specific control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 23.50\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nStroke\/Travel Length (In): 9.00\u003cbr\u003e\nCollapsed Length (In): 14.50\u003cbr\u003e\nBillet Reservoir Clamp Included: Yes\u003cbr\u003e\nLower Mount Type: Eye 19.25mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5160\u003cbr\u003e\nCollapsed Length (Mm): 368.3\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nStroke\/Travel Length (Mm): 228.6\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 597.0\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nAaiaid Part Number: BBGL25-325096\u003cbr\u003e\nPart Number: 25-325096\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771387838573,"sku":"25325096","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-325096_2.jpg?v=1792221855"},{"product_id":"bilstein-b8-5160-remote-reservoir-shock-absorber-25-311211","title":"Bilstein B8 5160 Remote Reservoir Shock Absorber 25-311211","description":"B8 5160 - Suspension Shock Absorber\n\u003cp\u003eThe Bilstein B8 5160 remote reservoir shock absorber, part number 25-311211, is engineered as a direct-fit suspension upgrade for lifted trucks and SUVs. Its remote reservoir increases cooling capacity and available wheel travel, helping optimize suspension performance during demanding off-road driving. Designed for light-truck applications, this shock absorber is compatible with select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 models.\u003cbr\u003eThe 46mm monotube design delivers consistent, fade-resistant performance by maintaining reliable damping control under changing conditions. Velocity-sensitive digressive valving is tuned for the specific application to provide responsive handling on the road and controlled suspension movement over uneven terrain. The non-adjustable damping configuration offers a straightforward installation without requiring manual tuning.\u003cbr\u003eA 360-degree swivel banjo hose fitting helps simplify hose positioning and supports a clean, low-profile installation. The included billet reservoir clamp securely mounts the remote reservoir, while the zinc-plated smooth body provides durable protection for demanding environments. A black bellows boot helps protect the shock shaft from dirt and debris, and the eye lower mount with stem upper mount supports the intended vehicle-specific fitment.\u003cbr\u003eThis Bilstein B8 5160 shock absorber features a 14mm shaft, 9.00 inches of suspension travel, a 14.50-inch collapsed length, and a 23.50-inch extended length. It includes a remote reservoir and is designed without a spring seat for non-coilover applications. Professional installation is recommended, and fitment should be verified against the vehicle’s suspension configuration before ordering. Prop 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir increases cooling capacity and wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive valving is application-specific\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBillet reservoir clamp included for secure mounting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e360-degree swivel banjo hose fitting supports flexible installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated smooth body enhances durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot helps protect the shaft from debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping for simple, dependable operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye lower mount and stem upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e9.00 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14.50-inch collapsed length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e23.50-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2011–2014 Toyota FJ Cruiser, 2012–2014 Toyota 4Runner, and 2012–2014 Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nBillet Reservoir Clamp Included: Yes\u003cbr\u003e\nLower Mount Type: Eye 19.25mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5160\u003cbr\u003e\nCollapsed Length (Mm): 368.3\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nStroke\/Travel Length (Mm): 228.6\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nCollapsed Length (In): 14.50\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (Mm): 597.0\u003cbr\u003e\nExtended Length (In): 23.50\u003cbr\u003e\nStroke\/Travel Length (In): 9.00\u003cbr\u003e\nAaiaid Part Number: BBGL25-311211\u003cbr\u003e\nPart Number: 25-311211\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771397242989,"sku":"25311211","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-311211_1.jpg?v=1792222277"},{"product_id":"bilstein-b8-8100-dsa-reservoir-shock-absorber-25-294101-for-toyota-4runner-and-lexus-gx460","title":"Bilstein B8 8100 DSA Reservoir Shock Absorber 25-294101 for Toyota 4Runner and Lexus GX460","description":"B8 8100 (DSA) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your lifted truck or SUV with the Bilstein B8 8100 DSA reservoir shock absorber, part number 25-294101. Designed for select 2012–2016 Toyota 4Runner and Lexus GX460 applications, this direct-fit shock delivers durable, adjustable performance for demanding street, trail, and off-road driving. Its monotube construction and EVO Grey finish provide consistent operation and long-lasting durability.\u003c\/p\u003e\n\u003cp\u003eThe large-bore 60 mm shock body and 60 mm piston increase oil capacity to help manage heat during extended drives over rough terrain. Bilstein’s velocity-sensitive digressive valving is specifically tuned for each application, providing responsive handling, improved ride comfort, and reliable control without sacrificing performance. The remote or piggyback reservoir design supports efficient installation while helping maintain performance under demanding conditions.\u003c\/p\u003e\n\u003cp\u003eDual Speed Adjustment allows independent tuning of low- and high-speed compression through convenient click adjuster knobs. This gives drivers the flexibility to tailor damping characteristics to changing road surfaces, vehicle loads, and driving preferences. The smooth-body, non-coilover design includes a spring seat and uses an 18 mm shaft with an eye-style lower mount and stem-style upper mount. Boot is not included. A Prop 65 warning applies: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\n\u003cp\u003eCompatible applications include select Toyota 4Runner and Lexus GX460 models from 2012 through 2016. Verify vehicle fitment and suspension configuration before ordering. Bilstein B8 8100 DSA shocks are engineered for drivers seeking increased adjustability, comfort, and fade-resistant control from a premium suspension upgrade.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e60 mm large-bore digressive piston provides increased tuning range, comfort, and control\u003c\/li\u003e\n\u003cli\u003eDual Speed Adjustment with click adjuster knobs for independent low- and high-speed compression tuning\u003c\/li\u003e\n\u003cli\u003eMonotube design delivers consistent, fade-resistant performance\u003c\/li\u003e\n\u003cli\u003eReservoir design increases oil capacity and helps manage operating heat\u003c\/li\u003e\n\u003cli\u003eApplication-specific velocity-sensitive digressive valving improves ride quality and handling\u003c\/li\u003e\n\u003cli\u003eDirect-fit design supports installation on select lifted Toyota 4Runner and Lexus GX460 models\u003c\/li\u003e\n\u003cli\u003eSmooth-body, non-coilover construction with durable EVO Grey finish\u003c\/li\u003e\n\u003cli\u003e18 mm shaft with eye-style lower mount and stem-style upper mount\u003c\/li\u003e\n\u003cli\u003eSpring seat included; boot not included\u003c\/li\u003e\n\u003cli\u003eFits select 2012–2016 Toyota 4Runner and Lexus GX460 applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.1mm\u003cbr\u003e\nSeries: B8 8100 (DSA)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (Mm): 596.5\u003cbr\u003e\nExtended Length (In): 23.48\u003cbr\u003e\nCollapsed Length (In): 14.94\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nCollapsed Length (Mm): 379.5\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nAdjustable Damping: Double Adjustable Compression with Click Adjuster Knobs\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL25-294101\u003cbr\u003e\nPart Number: 25-294101\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771399110765,"sku":"25294101","price":835.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-294101_1.jpg?v=1792222350"},{"product_id":"bilstein-b8-8100-reservoir-suspension-shock-absorber-25-294095","title":"Bilstein B8 8100 Reservoir Suspension Shock Absorber 25-294095","description":"B8 8100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade your lifted truck or SUV with the Bilstein B8 8100 reservoir suspension shock absorber, part number 25-294095. Designed as a direct-fit solution for select Toyota 4Runner and Lexus GX460 applications, this shock absorber delivers confident control on rough roads, trails, and extended drives. Its large-bore body increases oil volume to help manage operating temperatures, while the remote or piggyback reservoir configuration supports reliable performance and installation flexibility.\u003cbr\u003eThe Bilstein B8 8100 uses a monotube design with a 60mm digressive piston engineered for a broad range of tuning. Velocity-sensitive valving responds progressively to changing road conditions, helping provide a controlled, comfortable ride without sacrificing handling. The non-adjustable damping setup is calibrated for the intended application, making this shock absorber a practical choice for drivers seeking improved suspension control without manual adjustments.\u003cbr\u003eBuilt with aerospace-quality billet components, the Bilstein B8 8100 features an EVO Grey finish, an 18mm shaft, and a 19.2mm eye-style lower mount with a stem-style upper mount. The smooth-body, non-coilover design includes a reservoir but does not include a boot or spring seat. This suspension shock absorber is intended for the light-truck segment and is engineered to withstand demanding driving conditions while maintaining consistent, fade-resistant performance.\u003cbr\u003eFitment includes select 2012-2016 Lexus GX460 models and 2012-2016 Toyota 4Runner models. Verify the vehicle’s suspension configuration and application details before ordering to ensure proper compatibility. Bilstein part number 25-294095 is sold as an individual suspension shock absorber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 8100\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Monotube shock absorber with reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: 60mm digressive piston\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody: 60mm internal diameter smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable, velocity-sensitive valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 19.2mm eye\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft: 18mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Grey\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2012-2016 Lexus GX460 and Toyota 4Runner models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.2mm\u003cbr\u003e\nSeries: B8 8100\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nBody Design: 60mm ID Smooth Body (Non-Coilover)\u003cbr\u003e\nExtended Length (Mm): 596.5\u003cbr\u003e\nExtended Length (In): 23.48\u003cbr\u003e\nCollapsed Length (In): 14.94\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nCollapsed Length (Mm): 379.5\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL25-294095\u003cbr\u003e\nPart Number: 25-294095\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771399209069,"sku":"25294095","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-294095_2.jpg?v=1792222370"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-347464","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-347464","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck or SUV with the Bilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-347464. Designed for vehicles equipped with a front OE coilover-style suspension, this performance shock features multiple snap-ring grooves that allow the spring seat position to be adjusted for up to 3 inches of front lift when used with OE springs, depending on the application. This makes it an effective solution for leveling the vehicle while maintaining improved suspension control and increased wheel travel.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design with a digressive piston and self-adjusting deflective disc valve technology. This combination delivers consistent, fade-free damping performance across changing road and driving conditions without requiring external damping adjustments. The shock is engineered for light-truck applications and includes a spring seat for installation with the compatible coilover assembly. Its zinc-plated finish provides durable corrosion resistance for long-term use.\u003cbr\u003eThis Bilstein shock absorber has an eye-style lower mount with a 24.3mm mounting diameter and a stem-style upper mount. It features a 14mm shaft, 5.50 inches of suspension travel, and a non-reservoir design. The grooved coilover body supports ride-height adjustment while the monotube internal design helps provide responsive handling, stability, and reliable control. The Bilstein B8 5100 24-347464 fits select 2024 Toyota Land Cruiser, 2025 Toyota 4Runner, 2025 Toyota Land Cruiser, 2026 Toyota 4Runner, and 2026 Toyota Land Cruiser applications. Professional installation is recommended. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-free damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide-height adjustable snap-ring grooved body supports up to 3 inches of front lift with OE springs, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDigressive piston and self-adjusting deflective disc valve deliver responsive suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for front OE coilover-style suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides increased wheel travel and improved handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style lower mount with 24.3mm mounting diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStem-style upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish helps resist corrosion\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir required\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select Toyota 4Runner and Land Cruiser applications from 2024 through 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (In): 24.46\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 5.50\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nLower Mount Type: Eye 24.3mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nCollapsed Length (Mm): 481.7\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nStroke\/Travel Length (Mm): 139.7\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (Mm): 621.3\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 18.96\u003cbr\u003e\nAaiaid Part Number: BBGL24-347464\u003cbr\u003e\nPart Number: 24-347464\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2025\u003cbr\u003e\nToyota 4Runner  2026\u003cbr\u003e\nToyota Land Cruiser  2024\u003cbr\u003e\nToyota Land Cruiser  2025\u003cbr\u003e\nToyota Land Cruiser  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771401306221,"sku":"24347464","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-347464_1.jpg?v=1792222496"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-24-347433","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 24-347433","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck or SUV with the Bilstein B8 5100 suspension shock absorber, part number 24-347433. Engineered as a direct-fit solution for select 2024 Toyota Land Cruiser, 2025 Toyota 4Runner, 2025 Toyota Land Cruiser, 2026 Toyota 4Runner, and 2026 Toyota Land Cruiser applications, this shock is tuned for the specific vehicle application to deliver a balanced combination of ride quality, handling, and comfort. The B8 5100 series is designed for light-truck use and provides dependable performance on and off the road.\u003cbr\u003eThe 46mm monotube construction helps maintain consistent, fade-free damping performance in changing driving conditions. Bilstein’s velocity-sensitive, digressive piston responds quickly to road inputs and suspension movement, helping the shock absorber provide controlled handling without sacrificing ride comfort. The zinc-plated finish supports long-term durability, while the smooth-body design offers a straightforward installation for compatible suspension systems. This model includes a protective boot and uses a stem-style upper mount with an eye-style lower mount.\u003cbr\u003eFeature: Brand Bilstein; Feature: Series B8 5100; Feature: Part number 24-347433; Feature: Application Light truck; Feature: Internal design Monotube; Feature: Piston diameter 1.81 inches; Feature: Shaft diameter 0.55 inches; Feature: Damping Non-adjustable; Feature: Body design Smooth body, non-coilover; Feature: Upper mount Stem; Feature: Lower mount Eye; Feature: Reservoir None; Feature: Spring seat Not included; Feature: Boot Included; Feature: Finish Zinc plated; Feature: Collapsed length 16.37 inches; Feature: Extended length 25.86 inches; Feature: Stroke\/travel length 9.49 inches. This Bilstein shock absorber is intended for compatible lifted suspension applications and is sold as an individual replacement component. Installation should be completed by a qualified technician, with vehicle compatibility verified before purchase. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBilstein B8 5100 series suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number 24-347433\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design for select Toyota 4Runner and Land Cruiser applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube construction for consistent, fade-free performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping tuned for the specific vehicle application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish for durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStem-style upper mount and eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtective boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length of 16.37 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length of 25.86 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke or travel length of 9.49 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for light-truck suspension applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nLower Mount Type: Eye 19.1mm\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nCollapsed Length (Mm): 415.8\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 241.1\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (Mm): 656.9\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 16.37\u003cbr\u003e\nExtended Length (In): 25.86\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 9.49\u003cbr\u003e\nBoot Included: Yes\u003cbr\u003e\nAaiaid Part Number: BBGL24-347433\u003cbr\u003e\nPart Number: 24-347433\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2025\u003cbr\u003e\nToyota 4Runner  2026\u003cbr\u003e\nToyota Land Cruiser  2024\u003cbr\u003e\nToyota Land Cruiser  2025\u003cbr\u003e\nToyota Land Cruiser  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771401437293,"sku":"24347433","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-347433_2.jpg?v=1792222521"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-328258","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-328258","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck or SUV suspension with the Bilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-328258. Designed for vehicles equipped with a front OE coilover-style suspension, this shock absorber provides a practical way to improve handling, increase wheel travel, and achieve a more level stance. Its snap-ring grooved body allows the spring seat to be positioned at multiple settings, supporting up to 3 inches of front lift with original equipment springs when permitted by the application.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm monotube design with a digressive piston and self-adjusting deflective disc valve. This construction delivers consistent damping, fade-free performance, and responsive control across changing road and trail conditions. The shock features non-adjustable damping, a zinc-plated finish, a stem-style upper mount, and an eye-style lower mount. A spring seat is included, along with a black straight protective boot.\u003cbr\u003eThis light-truck suspension shock absorber is engineered for direct application-specific installation and does not include a remote reservoir. The Bilstein B8 5100 series is a dependable choice for drivers seeking improved ride control and front-end leveling without replacing the complete suspension system. Compatible applications include select 2011-2014 Toyota FJ Cruiser models, 2012-2014 Toyota 4Runner models, and 2012-2014 Lexus GX460 models. Verify vehicle configuration and suspension requirements before installation. This product contains a California Proposition 65 warning regarding cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design delivers consistent, fade-resistant damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide height adjustable snap-ring grooved body supports application-dependent front lift with OE springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDigressive piston with self-adjusting deflective disc valve improves handling and wheel control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping is calibrated for dependable light-truck suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eZinc-plated finish helps provide durable corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoilover-style body includes a spring seat for ride-height adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStem-style upper mount and eye-style lower mount support application-specific installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack straight protective boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select Toyota FJ Cruiser, Toyota 4Runner, and Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 566.8\u003cbr\u003e\nLower Mount Type: Eye 14.2mm\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nCollapsed Length (Mm): 444.6\u003cbr\u003e\nStroke\/Travel Length (Mm): 122.2\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nExtended Length (In): 22.31\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.50\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 4.81\u003cbr\u003e\nBoot Included: Black Straight\u003cbr\u003e\nAaiaid Part Number: BBGL24-328258\u003cbr\u003e\nPart Number: 24-328258\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX460  2010\u003cbr\u003e\nLexus GX460  2011\u003cbr\u003e\nLexus GX460  2012\u003cbr\u003e\nLexus GX460  2013\u003cbr\u003e\nLexus GX460  2014\u003cbr\u003e\nLexus GX460  2015\u003cbr\u003e\nLexus GX460  2016\u003cbr\u003e\nLexus GX460  2017\u003cbr\u003e\nLexus GX460  2018\u003cbr\u003e\nLexus GX460  2019\u003cbr\u003e\nLexus GX460  2020\u003cbr\u003e\nLexus GX460  2021\u003cbr\u003e\nLexus GX460  2022\u003cbr\u003e\nLexus GX460  2023\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771459797101,"sku":"24328258","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-328258_2.jpg?v=1792222889"},{"product_id":"bilstein-b6-4600-24-325462-monotube-suspension-shock-absorber","title":"Bilstein B6 4600 24-325462 Monotube Suspension Shock Absorber","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck or SUV with the Bilstein B6 4600 suspension shock absorber, part number 24-325462. Designed as a direct-fit replacement for original equipment shock absorbers, this application-specific unit helps improve ride quality, handling, stability, and comfort without requiring vehicle modifications. It is suitable for select Toyota Tacoma, Toyota 4Runner, and Lexus GX470 applications, including model years from 2004 through 2015 depending on configuration.\u003cbr\u003eThe Bilstein B6 4600 features a 46mm monotube design that supports consistent, fade-resistant performance under changing driving conditions. Its velocity-sensitive, digressive piston responds quickly to road inputs while maintaining controlled suspension movement over bumps, uneven pavement, and load changes. Bilstein tunes each shock absorber for its specific vehicle application to help deliver balanced damping and predictable handling. The non-adjustable damping design provides a factory-compatible setup with enhanced control, while the smooth-body construction is intended for standard suspension configurations rather than coilover applications.\u003cbr\u003eThis Bilstein shock absorber includes a stem-style upper mount, an eye-style lower mount, a yellow-painted finish, and a blue straight boot. The integrated spring seat is included, and the unit uses a 14mm shaft with a 46mm piston diameter. It has a 5.00-inch stroke and a maximum extended length of 22.19 inches, helping provide the suspension travel required by the specified applications. The shock does not include a remote reservoir and is designed for light-truck use. Verify vehicle fitment, suspension configuration, and installation position before ordering. This product carries a California Proposition 65 warning regarding cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning helps improve ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping design for straightforward installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body construction for standard suspension applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStem-style upper mount with eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eYellow-painted finish with blue straight boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shaft diameter and 46mm piston diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e5.00-inch stroke with 22.19-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo remote reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select Toyota Tacoma, Toyota 4Runner, and Lexus GX470 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 563.7\u003cbr\u003e\nCollapsed Length (In): 17.19\u003cbr\u003e\nStroke\/Travel Length (In): 5.00\u003cbr\u003e\nLower Mount Type: Eye 14.2mm\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nCollapsed Length (Mm): 436.5\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nStroke\/Travel Length (Mm): 127.0\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nExtended Length (In): 22.19\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: Blue Straight\u003cbr\u003e\nAaiaid Part Number: BBGL24-325462\u003cbr\u003e\nPart Number: 24-325462\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013\u003cbr\u003e\nToyota Tacoma  2014\u003cbr\u003e\nToyota Tacoma  2015","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771488174189,"sku":"24325462","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-325462_1.jpg?v=1792222945"},{"product_id":"bilstein-b8-5100-ride-height-adjustable-front-shock-absorber-24-324359","title":"Bilstein B8 5100 Ride Height Adjustable Front Shock Absorber 24-324359","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eBilstein B8 5100 Ride Height Adjustable shock absorber part number 24-324359 is engineered for select trucks and SUVs equipped with a front original-equipment coilover-style suspension. Designed to improve ride control, handling, and wheel travel, this shock absorber provides a practical way to level the front of your vehicle when used with compatible OE springs.\u003c\/p\u003e\n\u003cp\u003eThe snap-ring grooved body features multiple spring seat positions, allowing up to 3 inches of front lift depending on the vehicle application. Its monotube construction uses a 46mm digressive piston and self-adjusting deflective disc valving to deliver consistent damping and fade-resistant performance across changing road and driving conditions. The included spring seat and zinc-plated finish support reliable installation and long-term durability.\u003c\/p\u003e\n\u003cp\u003eThis non-adjustable Bilstein B8 5100 shock absorber uses an eye-style lower mount and stem-style upper mount, with a black straight boot for added shaft protection. It has a 5.56-inch stroke, a 17.03-inch collapsed length, and a 22.59-inch extended length. The unit is intended for light-truck applications and does not include an external reservoir. Confirm vehicle fitment and suspension configuration before installation.\u003c\/p\u003e\n\u003cp\u003eDesigned for select Toyota Tacoma, Toyota 4Runner, and Lexus GX470 applications, the Bilstein 24-324359 provides dependable monotube performance for drivers seeking improved control and front ride-height adjustability. This product contains a California Proposition 65 warning regarding cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eB8 5100 Ride Height Adjustable series for select trucks and SUVs\u003c\/li\u003e\n\u003cli\u003eSnap-ring grooved coilover body provides adjustable spring seat positions\u003c\/li\u003e\n\u003cli\u003eProvides up to 3 inches of front lift with OE springs, depending on application\u003c\/li\u003e\n\u003cli\u003e46mm monotube design supports consistent, fade-resistant damping\u003c\/li\u003e\n\u003cli\u003eDigressive piston with self-adjusting deflective disc valving\u003c\/li\u003e\n\u003cli\u003eNon-adjustable damping configuration\u003c\/li\u003e\n\u003cli\u003eEye-style lower mount and stem-style upper mount\u003c\/li\u003e\n\u003cli\u003eIncludes spring seat and black straight protective boot\u003c\/li\u003e\n\u003cli\u003eZinc-plated finish for durable corrosion resistance\u003c\/li\u003e\n\u003cli\u003eNo external reservoir\u003c\/li\u003e\n\u003cli\u003eFits select 2004-2015 Toyota Tacoma, Toyota 4Runner, and Lexus GX470 applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.2mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nCollapsed Length (Mm): 432.5\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 141.2\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nExtended Length (In): 22.59\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (Mm): 573.7\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 17.03\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 5.56\u003cbr\u003e\nBoot Included: Black Straight\u003cbr\u003e\nAaiaid Part Number: BBGL24-324359\u003cbr\u003e\nPart Number: 24-324359\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nLexus GX470  2003\u003cbr\u003e\nLexus GX470  2004\u003cbr\u003e\nLexus GX470  2005\u003cbr\u003e\nLexus GX470  2006\u003cbr\u003e\nLexus GX470  2007\u003cbr\u003e\nLexus GX470  2008\u003cbr\u003e\nLexus GX470  2009\u003cbr\u003e\nToyota 4Runner  2003\u003cbr\u003e\nToyota 4Runner  2004\u003cbr\u003e\nToyota 4Runner  2005\u003cbr\u003e\nToyota 4Runner  2006\u003cbr\u003e\nToyota 4Runner  2007\u003cbr\u003e\nToyota 4Runner  2008\u003cbr\u003e\nToyota 4Runner  2009\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013\u003cbr\u003e\nToyota Tacoma  2014\u003cbr\u003e\nToyota Tacoma  2015","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771495022701,"sku":"24324359","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-324359_3.jpg?v=1792222964"},{"product_id":"fabtech-dirt-logic-2-25-resi-front-shock-fts801392-for-2012-2021-toyota-4runner","title":"Fabtech Dirt Logic 2.25 Resi Front Shock FTS801392 for 2010-2024 Toyota 4Runner","description":"\u003cp\u003eUpgrade the front suspension of your 2012-2021 Toyota 4Runner with the Fabtech Dirt Logic 2.25 Resi Front Shock, part number FTS801392. Designed for demanding off-road use, this high-performance shock absorber helps deliver improved control, consistent damping, and enhanced ride quality across rough terrain. Its remote-reservoir design supports sustained performance during extended trail driving and high-impact suspension activity.\u003c\/p\u003e\n\u003cp\u003eThe Dirt Logic 2.25 series is engineered for strength and longevity, making it a dependable choice for drivers who require more from their suspension system. The robust construction is suited to off-road applications while maintaining compatibility with the vehicle’s factory mounting locations when used as specified by Fabtech. This front shock is a practical upgrade for improving suspension response, wheel control, and overall trail capability.\u003c\/p\u003e\n\u003cp\u003eFabtech FTS801392 is intended for the front of the vehicle and fits Toyota 4Runner models from 2012 through 2021. The shock has a 15.02-inch collapsed length, a 23.68-inch extended length, and an 8.66-inch stroke. Professional installation is recommended, and suspension components should be inspected regularly to ensure proper fitment and performance. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\n\u003cli\u003ePart Number: FTS801392\u003c\/li\u003e\n\u003cli\u003eApplication: Front suspension shock absorber\u003c\/li\u003e\n\u003cli\u003eSeries: Dirt Logic 2.25 Resi\u003c\/li\u003e\n\u003cli\u003eVehicle Fitment: 2012-2021 Toyota 4Runner\u003c\/li\u003e\n\u003cli\u003eCollapsed Length: 15.02 inches\u003c\/li\u003e\n\u003cli\u003eExtended Length: 23.68 inches\u003c\/li\u003e\n\u003cli\u003eShock Stroke: 8.66 inches\u003c\/li\u003e\n\u003cli\u003ePerformance: Designed for improved off-road control, durability, and suspension response\u003c\/li\u003e\n\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 15.02\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 23.68 in\u003cbr\u003e\nShock Stroke: 8.66 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS801392\u003cbr\u003e\nPart Number: FTS801392\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771864678509,"sku":"FTS801392","price":450.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/dirt-logic-225-resi-stainless_bb2be674-a076-49ae-a20b-bd3d9aec68be.jpg?v=1792231463"},{"product_id":"fabtech-fts7237-performance-shock-absorber-for-ram-2500-ram-3500-and-toyota-4runner","title":"Fabtech FTS7237 Performance Shock Absorber for Ram 2500, Ram 3500 and Toyota 4Runner","description":"\u003cp\u003eThe Fabtech FTS7237 Performance Shock Absorber is engineered to work with Fabtech suspension and lift systems, delivering controlled handling and dependable ride quality for trucks and SUVs. Its high-velocity 9-stage valving provides consistent damping across changing road conditions, helping improve suspension control during daily driving, towing, off-road travel, and high-speed use. A closed-cell insert helps reduce shock fade when the suspension is working hard.\u003cbr\u003eThe FTS7237 features a 10.66-inch shock stroke, with a collapsed length of 15.39 inches and an extended length of 26.05 inches. This performance shock is designed to complement the geometry and demands of compatible Fabtech lift kits, making it a practical replacement or upgrade for suspension systems that require reliable damping performance. The carefully tuned valving helps manage suspension movement while supporting a more stable and predictable ride.\u003cbr\u003eThis Fabtech shock absorber is compatible with select 2012 and newer Ram 2500, Ram 3500, and Toyota 4Runner applications. Verify your vehicle configuration, suspension setup, and lift-kit requirements before ordering to ensure proper fitment. Part number FTS7237 identifies this Fabtech Performance Shock for replacement and installation reference. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS7237\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Designed to work with Fabtech lift kits and suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving: High-velocity 9-stage valving for controlled damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Design: Closed-cell insert helps reduce shock fade at high speeds\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 10.66 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 15.39 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 26.05 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select 2012-2017 Ram 2500, Ram 3500, and Toyota 4Runner applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 15.39\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 26.05 in\u003cbr\u003e\nShock Stroke: 10.66 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS7237\u003cbr\u003e\nPart Number: FTS7237\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nDodge Ram 1500  1994\u003cbr\u003e\nDodge Ram 1500  1995\u003cbr\u003e\nDodge Ram 1500  1996\u003cbr\u003e\nDodge Ram 1500  1997\u003cbr\u003e\nDodge Ram 1500  1998\u003cbr\u003e\nDodge Ram 1500  1999\u003cbr\u003e\nDodge Ram 1500  2000\u003cbr\u003e\nDodge Ram 1500  2001\u003cbr\u003e\nDodge Ram 2500  1994\u003cbr\u003e\nDodge Ram 2500  1995\u003cbr\u003e\nDodge Ram 2500  1996\u003cbr\u003e\nDodge Ram 2500  1997\u003cbr\u003e\nDodge Ram 2500  1998\u003cbr\u003e\nDodge Ram 2500  1999\u003cbr\u003e\nDodge Ram 2500  2000\u003cbr\u003e\nDodge Ram 2500  2001\u003cbr\u003e\nDodge Ram 2500  2002\u003cbr\u003e\nDodge Ram 2500  2003\u003cbr\u003e\nDodge Ram 2500  2004\u003cbr\u003e\nDodge Ram 2500  2005\u003cbr\u003e\nDodge Ram 2500  2006\u003cbr\u003e\nDodge Ram 2500  2007\u003cbr\u003e\nDodge Ram 2500  2008\u003cbr\u003e\nDodge Ram 2500  2009\u003cbr\u003e\nDodge Ram 2500  2010\u003cbr\u003e\nDodge Ram 3500  1994\u003cbr\u003e\nDodge Ram 3500  1995\u003cbr\u003e\nDodge Ram 3500  1996\u003cbr\u003e\nDodge Ram 3500  1997\u003cbr\u003e\nDodge Ram 3500  1998\u003cbr\u003e\nDodge Ram 3500  1999\u003cbr\u003e\nDodge Ram 3500  2000\u003cbr\u003e\nDodge Ram 3500  2001\u003cbr\u003e\nDodge Ram 3500  2002\u003cbr\u003e\nDodge Ram 3500  2003\u003cbr\u003e\nDodge Ram 3500  2004\u003cbr\u003e\nDodge Ram 3500  2005\u003cbr\u003e\nDodge Ram 3500  2006\u003cbr\u003e\nDodge Ram 3500  2007\u003cbr\u003e\nDodge Ram 3500  2008\u003cbr\u003e\nDodge Ram 3500  2009\u003cbr\u003e\nDodge Ram 3500  2010\u003cbr\u003e\nRam 2500  2011\u003cbr\u003e\nRam 2500  2012\u003cbr\u003e\nRam 2500  2013\u003cbr\u003e\nRam 3500  2011\u003cbr\u003e\nRam 3500  2012\u003cbr\u003e\nRam 3500  2013\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771923791981,"sku":"FTS7237","price":58.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS7237-beauty.jpg?v=1792232218"},{"product_id":"fabtech-fts6237-suspension-shock-absorber-for-toyota-tacoma-and-4runner","title":"Fabtech FTS6237 Suspension Shock Absorber for Toyota Tacoma and 4Runner","description":"\u003cp\u003eUpgrade your vehicle’s suspension performance with the Fabtech FTS6237 Suspension Shock Absorber. Designed for select Toyota applications, this shock absorber helps provide controlled damping, improved ride stability, and dependable performance for daily driving and off-road use. Its durable construction is engineered to support the demands of modern suspension systems while maintaining consistent operation over varied terrain.\u003cbr\u003eThe Fabtech FTS6237 features a 2-inch body diameter and an 8.54-inch shock stroke to help manage suspension movement effectively. With a collapsed length of 17.4 inches and an extended length of 25.94 inches, it is designed for proper suspension travel within compatible applications. This replacement shock absorber is a practical choice for restoring suspension control or completing a Fabtech suspension upgrade.\u003cbr\u003eThe Fabtech FTS6237 fits the 2024 Toyota Tacoma, 2025 Toyota Tacoma, 2026 Toyota Tacoma, 2025 Toyota 4Runner, and 2026 Toyota 4Runner. Verify vehicle year, model, suspension configuration, and application requirements before installation to ensure proper fitment. Professional installation is recommended when specialized tools or suspension modifications are required. WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Suspension shock absorber for select Toyota Tacoma and 4Runner models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS6237\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Diameter: 2 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 8.54 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 17.4 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 25.94 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: 2024 Toyota Tacoma; 2025 Toyota Tacoma and 4Runner; 2026 Toyota Tacoma and 4Runner\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Warning: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 17.4\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov\u003cbr\u003e\nBody Diameter: 2 in\u003cbr\u003e\nExtended Length: 25.94 in\u003cbr\u003e\nShock Stroke: 8.54 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS6237\u003cbr\u003e\nPart Number: FTS6237\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2025\u003cbr\u003e\nToyota 4Runner  2026\u003cbr\u003e\nToyota Tacoma  2024\u003cbr\u003e\nToyota Tacoma  2025\u003cbr\u003e\nToyota Tacoma  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771981627501,"sku":"FTS6237","price":82.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts6237-kit.jpg?v=1792232974"},{"product_id":"fabtech-fts26134-shock-mount-bracket-for-2025-2026-toyota-4runner","title":"Fabtech FTS26134 Shock Mount Bracket for 2025-2026 Toyota 4Runner","description":"\u003cp\u003eUpgrade or replace your suspension hardware with the Fabtech FTS26134 Shock Mount Bracket, designed for select 2025 and 2026 Toyota 4Runner applications. This replacement bracket supports proper shock mounting and helps maintain the intended alignment and function of the vehicle’s suspension system. It is a practical solution for repairs, suspension upgrades, or restoring damaged mounting hardware.\u003cbr\u003eBuilt for compatibility with the fifth-generation Toyota 4Runner, the Fabtech FTS26134 is engineered to integrate with the vehicle’s suspension configuration when used with the appropriate Fabtech components and installation hardware. Its application-specific design helps simplify installation compared with adapting a universal bracket, while supporting dependable performance during everyday driving and off-road use.\u003cbr\u003eThe Fabtech FTS26134 Shock Mount Bracket is intended for suspension professionals, installers, and experienced enthusiasts who need a properly matched replacement component. Always verify vehicle application, suspension configuration, and installation requirements before ordering. Professional installation is recommended to ensure correct fitment and safe suspension operation. Fits 2025 Toyota 4Runner and 2026 Toyota 4Runner. California Proposition 65 Warning: Cancer and Reproductive Harm—www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26134\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Shock mount bracket\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Fits 2025 Toyota 4Runner and 2026 Toyota 4Runner\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Supports proper shock mounting for compatible suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Designed for application-specific integration with the Toyota 4Runner suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26134\u003cbr\u003e\nPart Number: FTS26134\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2025\u003cbr\u003e\nToyota 4Runner  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772038086765,"sku":"FTS26134","price":193.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/4RNR25_DRVR_TOP_DIRT.jpg?v=1792234330"},{"product_id":"fabtech-dirt-logic-2-5-resi-coilover-shock-absorber-fts26099-for-2012-2021-toyota-4runner","title":"Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber FTS26099 for 2010-2024 Toyota 4Runner","description":"Dirt Logic 2.5 Resi Coil Over Shock Absorber\n\u003cp\u003eUpgrade your Toyota 4Runner’s off-road suspension with the Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber, part number FTS26099. Developed from Fabtech’s desert racing experience, this performance-focused coilover is engineered for aggressive off-road driving and demanding trail conditions. Its reservoir design helps provide increased damping capacity, supporting consistent suspension performance when navigating rough terrain, whoops, rocks, and high-speed desert sections.\u003cbr\u003eThe Dirt Logic 2.5 is designed for a variety of coilover applications and combines robust construction with carefully tuned damping characteristics. It helps improve vehicle control, suspension response, and ride stability compared with standard shock absorbers. The included high-quality coil spring is built to complement the shock assembly, delivering dependable support for drivers seeking enhanced performance from their 4Runner suspension system.\u003cbr\u003eThis Fabtech coilover shock absorber fits 2012 through 2021 Toyota 4Runner models. It is intended for off-road enthusiasts who require durable suspension components for trail use, recreational driving, and performance-oriented applications. Verify vehicle configuration and installation requirements before ordering to ensure proper compatibility. Professional installation is recommended for suspension components. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26099\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Coilover shock absorber for off-road suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Dirt Logic 2.5 Resi\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: High damping capacity for aggressive off-road driving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Reservoir-equipped shock absorber developed from desert racing applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring: Includes a high-quality coil spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2012-2021 Toyota 4Runner\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26099\u003cbr\u003e\nPart Number: FTS26099\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772092121197,"sku":"FTS26099","price":2152.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/dirt-logic-25-resi-shock_TOY.png?v=1792234600"},{"product_id":"fabtech-dirt-logic-2-5-stainless-steel-coilover-shock-absorber-fts26059-for-toyota-fj-cruiser-4runner-and-tacoma","title":"Fabtech Dirt Logic 2.5 Stainless Steel Coilover Shock Absorber FTS26059 for Toyota FJ Cruiser, 4Runner and Tacoma","description":"\u003cp\u003eUpgrade the suspension performance of your lifted Toyota truck or SUV with the Fabtech Dirt Logic 2.5 Stainless Steel Coilover Shock Absorber, part number FTS26059. Designed for select 2011–2015 Toyota FJ Cruiser, 4Runner, and Tacoma applications, this coilover shock delivers improved control, durability, and corrosion resistance for demanding street and off-road use. Its OEM shock stroke and vehicle-specific design help provide a direct bolt-on installation when used with the appropriate suspension system.\u003cbr\u003eThe Dirt Logic 2.5 features a high-grade 304 stainless steel shock body with a detailed machined finish for long-lasting corrosion resistance and a clean appearance. A NitroSteel® piston rod provides increased hardness and corrosion protection compared with conventional chromed rods, helping the shock withstand harsh terrain, moisture, and repeated suspension cycles. The coilover assembly uses spherical bearings at each end for enhanced strength, while urethane misalignment cups in the top caps help reduce road noise transferred through the bearings.\u003cbr\u003eFabtech equips this Dirt Logic coilover with a high-quality coil spring engineered to go solid without breaking, settling, or bowing. The spring is preset with the proper preload, allowing the shock to be installed without additional adjustment. The shock is intended for lifted trucks and is built to support consistent suspension control during aggressive off-road driving. Its stainless steel and aluminum construction combines durability with dependable thermal performance for extended use.\u003cbr\u003eVehicle compatibility includes select 2011–2015 Toyota FJ Cruiser, 2012–2015 Toyota 4Runner, and 2012–2013 Toyota Tacoma applications. Confirm the vehicle year, model, suspension configuration, and required installation hardware before ordering. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26059\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: 304 stainless steel shock body with aluminum coilover components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Type: Dirt Logic 2.5 coilover shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: OEM\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUsage: Designed for lifted trucks and demanding off-road applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Rod: NitroSteel® material for increased hardness and corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Spherical bearings with urethane misalignment cups\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoil Spring: Preset preload for installation without additional adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2011–2015 Toyota FJ Cruiser, 2012–2015 Toyota 4Runner, and 2012–2013 Toyota Tacoma models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Warning: California Proposition 65—Cancer and Reproductive Harm\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nShock Stroke: OEM\u003cbr\u003e\nUsage: Lifted Trucks\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26059\u003cbr\u003e\nPart Number: FTS26059\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota 4Runner  2010\u003cbr\u003e\nToyota 4Runner  2011\u003cbr\u003e\nToyota 4Runner  2012\u003cbr\u003e\nToyota 4Runner  2013\u003cbr\u003e\nToyota 4Runner  2014\u003cbr\u003e\nToyota 4Runner  2015\u003cbr\u003e\nToyota 4Runner  2016\u003cbr\u003e\nToyota 4Runner  2017\u003cbr\u003e\nToyota 4Runner  2018\u003cbr\u003e\nToyota 4Runner  2019\u003cbr\u003e\nToyota 4Runner  2020\u003cbr\u003e\nToyota 4Runner  2021\u003cbr\u003e\nToyota 4Runner  2022\u003cbr\u003e\nToyota 4Runner  2023\u003cbr\u003e\nToyota 4Runner  2024\u003cbr\u003e\nToyota FJ Cruiser  2007\u003cbr\u003e\nToyota FJ Cruiser  2008\u003cbr\u003e\nToyota FJ Cruiser  2009\u003cbr\u003e\nToyota FJ Cruiser  2010\u003cbr\u003e\nToyota FJ Cruiser  2011\u003cbr\u003e\nToyota FJ Cruiser  2012\u003cbr\u003e\nToyota FJ Cruiser  2013\u003cbr\u003e\nToyota FJ Cruiser  2014\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772099068013,"sku":"FTS26059","price":1626.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS26059-beauty.jpg?v=1792234875"}],"url":"https:\/\/truckarmy.com\/collections\/toyota-4runner-shocks.oembed","provider":"Truck Army","version":"1.0","type":"link"}