{"title":"Toyota Tundra Shocks","description":"\u003cp\u003eNew shocks are the quickest way to tighten up a tired ride on your Toyota Tundra, and a must after a lift.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift height:\u003c\/strong\u003e shocks are sold for stock height or a lift range, so match yours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear\u003c\/strong\u003e are different parts and most are sold individually.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrivetrain and trim:\u003c\/strong\u003e 2WD, 4WD and off-road trims can take different shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelect your truck in the vehicle bar above to see only parts that fit.\u003c\/p\u003e","products":[{"product_id":"bilstein-b8-8100-black-hawk-3-way-adjustable-shock-absorber-25-352016","title":"Bilstein B8 8100 Black Hawk 3-Way Adjustable Shock Absorber 25-352016","description":"B8 8100 Black Hawk - Suspension Shock Absorber\n\u003cp\u003eUpgrade your light truck’s suspension with the Bilstein B8 8100 Black Hawk 3-Way Adjustable Shock Absorber, part number 25-352016. Designed as a direct-fit solution for select 2022–2026 Toyota Tundra applications, this shock absorber delivers controlled performance on paved roads, rugged trails, and varying loads. Its monotube design, aluminum construction, and EVO Grey finish provide durable performance for demanding driving conditions.\u003cbr\u003eThe large 2.65-inch outside-diameter aluminum body works with a finned aluminum remote reservoir to increase oil capacity and improve cooling. Bilstein ZoneControl® position-sensitive damping helps manage compression and rebound while reducing harsh bottoming. This design supports a smoother ride over smaller impacts while maintaining control during larger suspension events. An included rock shield helps protect the shock body in off-road environments.\u003cbr\u003eThe B8 8100 Black Hawk features click adjusters for high- and low-speed compression, along with an internal bump stop for additional tuning capability. These adjustments allow drivers and builders to tailor damping response for different terrain, vehicle loads, and driving preferences. The 60mm piston and 18mm shaft contribute to consistent damping performance, while the stem upper mount and eye-style lower mount support direct-fit installation where specified. This shock absorber does not include a boot or spring seat.\u003cbr\u003eFitment includes the 2022, 2023, 2024, 2025, and 2026 Toyota Tundra. Verify vehicle configuration and suspension compatibility before installation. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 8100 Black Hawk\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit light truck suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2022–2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: High- and low-speed compression click adjusters with internal bump stop\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Finned aluminum remote reservoir for increased oil capacity and cooling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping Technology: ZoneControl® position-sensitive damping for compression and rebound control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: 60mm ID smooth body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 60mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 18mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Eye with 19.1mm mount diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: EVO Grey\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtection: Rock shield included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 25-352016\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSeries: B8 8100 Black Hawk\u003cbr\u003e\nCollapsed Length (Mm): 426.3\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nBody Design: 60mm ID Smooth Body (Non-Coilover)\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 639.5\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (In): 25.18\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nRock Shield Included: Yes\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nCollapsed Length (In): 16.78\u003cbr\u003e\nLower Mount Type: Eye 19.1mm\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nAaiaid Part Number: BBGL25-352016\u003cbr\u003e\nPart Number: 25-352016\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771368308845,"sku":"25352016","price":1125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-352016_1.jpg?v=1792221404"},{"product_id":"bilstein-b8-8100-black-hawk-3-way-adjustable-front-shock-absorber-25-332315-for-toyota-tundra","title":"Bilstein B8 8100 Black Hawk 3-Way Adjustable Front Shock Absorber 25-332315 for Toyota Tundra","description":"B8 8100 Black Hawk - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck’s suspension with the Bilstein B8 8100 Black Hawk 3-Way Adjustable shock absorber, part number 25-332315. Designed as a direct-fit solution for the 2022–2026 Toyota Tundra, this high-performance shock is engineered for drivers who demand controlled handling and a comfortable ride on both rugged trails and paved roads. Its monotube design, aluminum construction, and EVO Grey finish provide durable performance for light-truck applications.\u003cbr\u003eThe Bilstein B8 8100 Black Hawk uses a large aluminum shock body with a finned aluminum remote reservoir to increase oil capacity and help manage heat during demanding driving. ZoneControl® position-sensitive damping works through both compression and rebound to help reduce harsh bottoming while maintaining smooth, controlled suspension action over smaller impacts. The integrated internal bump stop further expands the shock’s usable damping range and helps improve control when the suspension approaches full compression.\u003cbr\u003eClick adjusters provide independent high-speed and low-speed compression tuning, allowing the suspension response to be tailored for varying terrain, vehicle loads, and driving preferences. The shock includes a 19.1-millimeter eye lower mount, stem upper mount, 18-millimeter shaft, 60-millimeter piston, finned aluminum reservoir, and included rock shield. It is designed as a smooth-body, non-coilover shock and does not include a boot or spring seat. Professional installation is recommended, followed by appropriate suspension setup and adjustment.\u003cbr\u003eCompatible with 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models. This product carries a California Proposition 65 warning for cancer and reproductive harm; see www.P65Warnings.ca.gov for details.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 8100 Black Hawk\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: Click adjusters for high-speed and low-speed compression with an internal bump stop\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Direct-fit suspension shock absorber for 2022–2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum with EVO Grey finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: Finned aluminum remote reservoir for increased oil capacity and cooling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping Technology: ZoneControl® position-sensitive damping for compression and rebound\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: 60-millimeter diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft: 18-millimeter diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: 19.1-millimeter eye\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRock Shield: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Smooth-body, non-coilover\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.1mm\u003cbr\u003e\nSeries: B8 8100 Black Hawk\u003cbr\u003e\nCollapsed Length (In): 16.78\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nExtended Length (Mm): 639.5\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nReservoir: Yes - Finned Aluminum\u003cbr\u003e\nRock Shield Included: Yes\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nCollapsed Length (Mm): 426.3\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nBody Design: 60mm ID Smooth Body (Non-Coilover)\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 25.18\u003cbr\u003e\nAaiaid Part Number: BBGL25-332315\u003cbr\u003e\nPart Number: 25-332315\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771384397933,"sku":"25332315","price":1125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-332315_3.jpg?v=1792221546"},{"product_id":"bilstein-b8-8100-reservoir-shock-absorber-25-325805-for-2012-2021-toyota-tundra","title":"Bilstein B8 8100 Reservoir Shock Absorber 25-325805 for 2012-2021 Toyota Tundra","description":"B8 8100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your lifted truck with the Bilstein B8 8100 reservoir shock absorber, part number 25-325805. Designed for select 2012–2021 Toyota Tundra applications, this direct-fit shock absorber combines a large-bore body, remote or piggyback reservoir technology, and application-specific tuning to provide dependable control on rough roads and demanding terrain. Its smooth-body design is finished in Bilstein EVO Grey for a durable, professional appearance.\u003cbr\u003eThe monotube internal design uses a large 60 mm piston and velocity-sensitive digressive valving to deliver consistent damping across changing road conditions. Increased oil capacity helps manage heat during extended driving, while the large piston provides a broad range of tuning for improved ride comfort without sacrificing handling control. The reservoir design supports additional fluid capacity and helps maintain fade-resistant performance when the suspension is working hard.\u003cbr\u003eThis Bilstein B8 8100 shock absorber features a non-adjustable damping configuration, an 18 mm shaft, an eye-style lower mount, and a stem-style upper mount. It does not include a boot or spring seat, and it is not a coilover. The shock has a collapsed length of 15.63 inches and an extended length of 25.12 inches, making it suitable for the specified lifted-truck suspension application. Always verify vehicle configuration and suspension lift requirements before installation.\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Select 2012–2021 Toyota Tundra models\u003c\/li\u003e\n\u003cli\u003eSeries: Bilstein B8 8100\u003c\/li\u003e\n\u003cli\u003eDesign: Monotube smooth-body shock absorber\u003c\/li\u003e\n\u003cli\u003eReservoir: Remote or piggyback reservoir design\u003c\/li\u003e\n\u003cli\u003eWarning: This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLarge 60 mm digressive piston provides a broad tuning range for comfort and control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube design supports consistent, fade-resistant damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir configuration increases oil capacity and helps manage heat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit design is engineered for select lifted 2012–2021 Toyota Tundra applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with an 18 mm shaft and EVO Grey finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEye-style lower mount and stem-style upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body construction is not a coilover and does not include a boot or spring seat\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 12.4mm\u003cbr\u003e\nPiston Diameter: 60mm\u003cbr\u003e\nSeries: B8 8100\u003cbr\u003e\nCollapsed Length (Mm): 397.0\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nFinish: EVO Grey\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 638.0\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nShaft Diameter: 18mm\u003cbr\u003e\nExtended Length (In): 25.12\u003cbr\u003e\nReservoir: Yes\u003cbr\u003e\nCollapsed Length (In): 15.63\u003cbr\u003e\nAaiaid Part Number: BBGL25-325805\u003cbr\u003e\nPart Number: 25-325805\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2015\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020\u003cbr\u003e\nToyota Tundra  2021","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771387478125,"sku":"25325805","price":626.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/25-325805_1.jpg?v=1792221831"},{"product_id":"bilstein-b8-5100-monotube-suspension-shock-absorber-24-332903-for-toyota-tundra-and-sequoia","title":"Bilstein B8 5100 Monotube Suspension Shock Absorber 24-332903 for Toyota Tundra and Sequoia","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade your truck or SUV suspension with the Bilstein B8 5100 suspension shock absorber, part number 24-332903. Designed as a direct-fit solution for select lifted Toyota Tundra and Sequoia applications, this shock absorber is engineered to improve ride quality, handling, and comfort without compromising durability. The B8 5100 Series is tuned for the specific vehicle application to deliver controlled performance across changing road and trail conditions.\u003cbr\u003eThe 46mm monotube design provides consistent, fade-resistant damping by helping maintain stable performance during demanding use. A velocity-sensitive digressive piston responds quickly to changing terrain, allowing the shock to provide firm control when needed while maintaining a comfortable ride during everyday driving. The smooth-body, non-coilover construction is finished with a durable zinc-plated exterior and includes a black bellows boot for added shaft protection.\u003cbr\u003eThis Bilstein shock absorber features a non-adjustable damping configuration, a 14mm shaft, and a 19.1mm eye-style lower mount with a stem-style upper mount. The extended length is 25.06 inches, the collapsed length is 16.59 inches, and the available stroke is 8.47 inches. The shock does not include a spring seat or reservoir and is intended for light-truck suspension applications. Fits select 2022-2026 Toyota Tundra and 2023-2026 Toyota Sequoia models; verify vehicle configuration and suspension lift requirements before ordering. This product carries a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46mm monotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-fit B8 5100 Series application for select lifted Toyota trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific tuning improves ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction with zinc-plated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e19.1mm eye-style lower mount and stem-style upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14mm shock shaft with black bellows protective boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping design for dependable everyday performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length of 25.06 inches and collapsed length of 16.59 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2022-2026 Toyota Tundra and 2023-2026 Toyota Sequoia models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 19.1mm\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nCollapsed Length (Mm): 421.4\u003cbr\u003e\nStroke\/Travel Length (Mm): 215.1\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nExtended Length (In): 25.06\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (Mm): 636.5\u003cbr\u003e\nCollapsed Length (In): 16.59\u003cbr\u003e\nStroke\/Travel Length (In): 8.47\u003cbr\u003e\nAaiaid Part Number: BBGL24-332903\u003cbr\u003e\nPart Number: 24-332903\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Sequoia  2023\u003cbr\u003e\nToyota Sequoia  2024\u003cbr\u003e\nToyota Sequoia  2025\u003cbr\u003e\nToyota Sequoia  2026\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771435450477,"sku":"24332903","price":123.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-332903_1.jpg?v=1792222834"},{"product_id":"bilstein-b6-4600-24-329156-monotube-front-shock-absorber-for-toyota-tundra-and-sequoia","title":"Bilstein B6 4600 24-329156 Monotube Front Shock Absorber for Toyota Tundra and Sequoia","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck or SUV with the Bilstein B6 4600 shock absorber, part number 24-329156. Designed as a direct-fit replacement for the original equipment shock, this Bilstein absorber helps improve ride quality, handling, and comfort without requiring vehicle modifications. It is engineered for select 2022–2026 Toyota Tundra and 2023–2026 Toyota Sequoia applications; verify vehicle fitment before installation.\u003cbr\u003eThe B6 4600 uses a 46-millimeter monotube design to deliver consistent, fade-resistant performance under changing driving conditions. Its velocity-sensitive, digressive piston responds quickly to road variations while maintaining controlled suspension movement. Bilstein tunes each shock absorber for its specific vehicle application, providing dependable damping performance for daily driving, hauling, and light-truck use. The non-adjustable damping configuration is calibrated for straightforward installation and reliable operation.\u003cbr\u003eThis smooth-body shock absorber features a durable yellow-painted finish, a blue straight protective boot, and an included spring seat. The lower eye mount accepts a 16.2-millimeter mounting interface, while the upper stem mount and 14-millimeter shaft support a secure OE-style installation. With a 3.93-inch stroke and a 19.84-inch extended length, the absorber is designed to provide controlled wheel movement within the specified suspension range. The Bilstein B6 4600 is not equipped with a remote reservoir and is intended for stock-height applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit replacement for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBilstein B6 4600 series shock absorber, part number 24-329156\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e46-millimeter monotube design for consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston adapts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific tuning for improved ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping calibrated for the application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower eye mount with 16.2-millimeter mounting interface\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper stem mount with 14-millimeter shaft diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body design with durable yellow-painted finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlue straight protective boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e3.93-inch stroke and 19.84-inch extended length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo reservoir; designed for stock-height suspension applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select 2022–2026 Toyota Tundra and 2023–2026 Toyota Sequoia models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 16.2mm\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nCollapsed Length (Mm): 404.0\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nStroke\/Travel Length (Mm): 99.8\u003cbr\u003e\nBody Design: Smooth Body (Non-coilover)\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nExtended Length (In): 19.84\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nExtended Length (Mm): 503.9\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nCollapsed Length (In): 15.91\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nStroke\/Travel Length (In): 3.93\u003cbr\u003e\nBoot Included: Blue Straight\u003cbr\u003e\nAaiaid Part Number: BBGL24-329156\u003cbr\u003e\nPart Number: 24-329156\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Sequoia  2023\u003cbr\u003e\nToyota Sequoia  2024\u003cbr\u003e\nToyota Sequoia  2025\u003cbr\u003e\nToyota Sequoia  2026\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771449639021,"sku":"24329156","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-329156_1.jpg?v=1792222866"},{"product_id":"bilstein-b8-5100-front-ride-height-adjustable-shock-absorber-24-261425","title":"Bilstein B8 5100 Front Ride Height Adjustable Shock Absorber 24-261425","description":"B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber\n\u003cp\u003eUpgrade the front suspension of your compatible Toyota truck or SUV with the Bilstein B8 5100 Ride Height Adjustable shock absorber, part number 24-261425. Designed for vehicles with a front OE coilover-style suspension, this monotube shock provides improved control, handling, and wheel travel while offering a practical alternative to coil spring spacers. The adjustable spring seat allows the front ride height to be raised from 0 to 3 inches with OE springs, depending on the application.\u003cbr\u003eThe Bilstein B8 5100 uses a 46mm digressive piston and self-adjusting deflective disc valve technology to respond quickly to changing road and driving conditions. Its snap-ring grooved coilover body provides multiple spring seat positions, while the included spring seat and black bellows boot support long-term performance and protection. The zinc-plated finish adds durability for light-truck applications, and the non-adjustable damping design is calibrated for consistent operation without manual tuning.\u003cbr\u003eThis Bilstein shock absorber features a 14mm shaft, eye-style lower mount, and stem-style upper mount for application-specific installation. It has a 5.12-inch stroke and is designed without an external reservoir. The B8 5100 Series is engineered for increased suspension performance and a more controlled ride on compatible Toyota applications, including select 2000-2007 Tundra and 2001-2007 Sequoia models. Verify vehicle fitment and suspension configuration before ordering. This product may expose you to chemicals including substances identified by California as causing cancer or reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSeries: Bilstein B8 5100 Ride Height Adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Front OE coilover-style suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Adjustment: Provides 0 to 3 inches of front lift with OE springs, depending on application\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Design: Monotube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Diameter: 46mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Non-adjustable with self-adjusting deflective disc valve technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Design: Snap-ring grooved coilover body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft Diameter: 14mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStroke: 5.12 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Black bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Eye-style 14.4mm\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Zinc plated\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 24-261425\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nExtended Length (Mm): 466.7\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 18.37\u003cbr\u003e\nStroke\/Travel Length (In): 5.12\u003cbr\u003e\nCollapsed Length (Mm): 336.0\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5100 (Ride Height Adjustable)\u003cbr\u003e\nLower Mount Type: Eye 14.4mm\u003cbr\u003e\nBody Design: Snap Ring Grooved Body (Coilover)\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 130.1\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nCollapsed Length (In): 13.23\u003cbr\u003e\nAaiaid Part Number: BBGL24-261425\u003cbr\u003e\nPart Number: 24-261425\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Sequoia  2001\u003cbr\u003e\nToyota Sequoia  2002\u003cbr\u003e\nToyota Sequoia  2003\u003cbr\u003e\nToyota Sequoia  2004\u003cbr\u003e\nToyota Sequoia  2005\u003cbr\u003e\nToyota Sequoia  2006\u003cbr\u003e\nToyota Sequoia  2007\u003cbr\u003e\nToyota Tundra  2000\u003cbr\u003e\nToyota Tundra  2001\u003cbr\u003e\nToyota Tundra  2002\u003cbr\u003e\nToyota Tundra  2003\u003cbr\u003e\nToyota Tundra  2004\u003cbr\u003e\nToyota Tundra  2005\u003cbr\u003e\nToyota Tundra  2006","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771547287661,"sku":"24261425","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-261425_1.jpg?v=1792223859"},{"product_id":"zone-offroad-nitro-smooth-body-shock-absorber-zon7952","title":"Zone Offroad Nitro Smooth Body Shock Absorber ZON7952","description":"Zone Nitro Smooth Body Shock\n\u003cp\u003eThe Zone Offroad Nitro Smooth Body Shock Absorber, part number ZON7952, is engineered to deliver stock-like control with dependable performance on and off the road. Its vehicle-specific valving is designed to improve compression and extension travel, while the twin-tube construction helps provide consistent ride quality across varied driving conditions. This shock absorber is suitable for a range of lift heights and is sold individually with the required bushings and sleeves included.\u003cbr\u003eThe Nitro Series design uses 10-stage velocity-sensitive valving to help manage suspension movement during changing terrain and driving conditions. A 50 psi nitrogen gas charge helps reduce aeration and supports quick shock response, while the Fluon-banded piston promotes smooth, controlled operation. The steel body is built for durability, and the non-tunable configuration provides straightforward installation and reliable performance without additional adjustment.\u003cbr\u003eThe Zone Offroad ZON7952 features an EB2 lower mount and S50 upper mount for application-specific fitment. It is compatible with select 2012-2016 Jeep Wrangler and 2012-2016 Toyota Tundra applications. Installation is rated at 1 out of 5 in difficulty, typically requiring approximately 30 minutes, with no metal cutting required. Always verify vehicle year, model, suspension configuration, and mounting requirements before installation. This product may expose you to chemicals known to the State of California to cause cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Zone Offroad\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: ZON7952\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: Nitro\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Twin-tube, nitrogen-charged shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving: 10-stage velocity-sensitive valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGas Charge: 50 psi nitrogen charge helps reduce aeration and improve response\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: Fluon-banded piston for smooth operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Steel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLift Compatibility: Suitable for any lift height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTunable: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: EB2\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: S50\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: No metal cutting required; approximately 30-minute installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2012-2016 Jeep Wrangler and 2012-2016 Toyota Tundra applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncluded: Bushings and sleeves\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nMaterial: Steel\u003cbr\u003e\nFor Use With Lift Heights: Any\u003cbr\u003e\nSeries: Nitro\u003cbr\u003e\nInstallation Difficulty: 1 out of 5\u003cbr\u003e\nInstallation Time: 0.5\u003cbr\u003e\nShock Compressed Length: 16.17\u003cbr\u003e\nShock Extended Length: 27.45\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nTechnology: Twin Tube\u003cbr\u003e\nTunable: No\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: EB2\u003cbr\u003e\nUpper Mount Type: S50\u003cbr\u003e\nBody Diameter: 2-3\/8\"\u003cbr\u003e\nAaiaid Part Number: FQMSZON7952\u003cbr\u003e\nPart Number: ZON7952\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Wrangler  2007\u003cbr\u003e\nJeep Wrangler  2008\u003cbr\u003e\nJeep Wrangler  2009\u003cbr\u003e\nJeep Wrangler  2010\u003cbr\u003e\nJeep Wrangler  2011\u003cbr\u003e\nJeep Wrangler  2012\u003cbr\u003e\nJeep Wrangler  2013\u003cbr\u003e\nJeep Wrangler  2014\u003cbr\u003e\nJeep Wrangler  2015\u003cbr\u003e\nJeep Wrangler  2016\u003cbr\u003e\nJeep Wrangler  2017\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2015\u003cbr\u003e\nToyota Tundra  2016","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771601256557,"sku":"ZON7952","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/zone_nitro-series-gas-shock-pr_72801e7f-906d-407a-8b00-2b6b855655b7.jpg?v=1792225045"},{"product_id":"bilstein-b6-4600-monotube-front-suspension-shock-absorber-24-186230-for-2012-2021-toyota-tundra","title":"Bilstein B6 4600 Monotube Front Suspension Shock Absorber 24-186230 for 2012-2021 Toyota Tundra","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height light truck with the Bilstein B6 4600 suspension shock absorber, part number 24-186230. Designed as a direct-fit replacement for the original equipment shock absorber, this Bilstein shock is specifically tuned for compatible Toyota Tundra applications from 2012 through 2021. It helps improve ride quality, handling, and comfort without requiring vehicle modifications or a lift kit.\u003cbr\u003eThe Bilstein B6 4600 uses a durable monotube design to provide consistent, fade-resistant performance under changing driving conditions. Its velocity-sensitive, digressive piston responds quickly to road input, helping the shock maintain control over rough surfaces, sudden impacts, and varying load conditions. Application-specific tuning delivers balanced damping for stock-height vehicles, making it well suited for daily driving, hauling, towing, and light-truck use.\u003cbr\u003eThis non-adjustable shock absorber features a yellow-painted finish, a blue straight protective boot, and an included spring seat. The lower mount uses a 16.4-millimeter eyelet, while the upper mount uses a stem-style design. With no external reservoir, the compact direct-fit configuration supports straightforward installation while retaining the dependable control expected from the Bilstein B6 4600 series. Verify vehicle configuration and axle position before ordering to ensure proper fitment.\u003cbr\u003eFitment includes the 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, and 2021 Toyota Tundra. This product may expose you to chemicals, including substances identified by California Proposition 65 as causing cancer or reproductive harm. Visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning for compatible 2012-2021 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design provides consistent, fade-resistant damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive, digressive piston responds to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eYellow-painted finish with blue straight protective boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping for reliable everyday performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring seat included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower mount: 16.4-millimeter eyelet\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper mount: Stem-style mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nCollapsed Length (In): 17.62\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 23.55\u003cbr\u003e\nCollapsed Length (Mm): 447.5\u003cbr\u003e\nLower Mount Type: Eye 16.4mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 598.2\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nBoot Included: Blue Straight\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nAaiaid Part Number: BBGL24-186230\u003cbr\u003e\nPart Number: 24-186230\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2015\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020\u003cbr\u003e\nToyota Tundra  2021","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771614855277,"sku":"24186230","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-186230_1.jpg?v=1792225327"},{"product_id":"zone-offroad-nitro-smooth-body-shock-absorber-zon7700","title":"Zone Offroad Nitro Smooth Body Shock Absorber ZON7700","description":"Zone Nitro Smooth Body Shock\n\u003cp\u003eThe Zone Offroad Nitro Smooth Body Shock Absorber, part number ZON7700, is engineered to deliver stock-like control with dependable performance on and off the road. Its vehicle-specific valving is designed to manage compression and extension travel, helping maintain a controlled ride across changing terrain. This shock absorber is sold individually and includes the required bushings and sleeves for installation.\u003cbr\u003eThe twin-tube, nitrogen-charged design uses a 50-psi nitrogen gas charge to promote rapid response and help reduce aeration during operation. A 10-stage, velocity-sensitive valving system automatically responds to changing suspension movement, providing balanced damping for everyday driving, trail use, and light off-road conditions. The Fluon-banded piston further supports smooth, consistent operation and long-term durability.\u003cbr\u003eConstructed from steel, the Zone Offroad ZON7700 features a 2-3\/8-inch shock body and is compatible with any lift height. It uses an EB2 lower mount and S50 upper mount, with no metal cutting required for installation. Installation difficulty is rated 1 out of 5, and estimated installation time is approximately 30 minutes. The shock is not tunable and is intended as a direct, vehicle-specific suspension replacement where applicable.\u003cbr\u003eThis Zone Offroad Nitro shock fits select 2012-2014 Jeep Wrangler, Ram 2500, Ram 3500, and Toyota Tundra applications. Always verify vehicle year, make, model, and suspension configuration before ordering. California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTwin-tube, nitrogen-charged design promotes responsive damping and reduced aeration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e10-stage velocity-sensitive valving supports controlled on-road and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific valving helps manage compression and extension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFluon-banded piston promotes smooth and consistent operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteel construction with a 2-3\/8-inch shock body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with any lift height\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEB2 lower mount and S50 upper mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNo metal cutting required for installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation difficulty: 1 out of 5\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEstimated installation time: approximately 30 minutes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSold individually with bushings and sleeves\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2012-2014 Jeep Wrangler, Ram 2500, Ram 3500, and Toyota Tundra applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nMaterial: Steel\u003cbr\u003e\nFor Use With Lift Heights: Any\u003cbr\u003e\nSeries: Nitro\u003cbr\u003e\nInstallation Difficulty: 1 out of 5\u003cbr\u003e\nInstallation Time: 0.5\u003cbr\u003e\nShock Compressed Length: 15.22\u003cbr\u003e\nShock Extended Length: 25.22\u003cbr\u003e\nRequires Metal Cutting: No\u003cbr\u003e\nTechnology: Twin Tube\u003cbr\u003e\nTunable: No\u003cbr\u003e\nCalifornia Proposition 65: ! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nLower Mount Type: EB2\u003cbr\u003e\nUpper Mount Type: S50\u003cbr\u003e\nBody Diameter: 2-3\/8\"\u003cbr\u003e\nAaiaid Part Number: FQMSZON7700\u003cbr\u003e\nPart Number: ZON7700\u003cbr\u003e\nBrand Aaia: FQMS\u003cbr\u003e\nFits\u003cbr\u003e\nDodge Ram 1500  1994\u003cbr\u003e\nDodge Ram 1500  1995\u003cbr\u003e\nDodge Ram 1500  1996\u003cbr\u003e\nDodge Ram 1500  1997\u003cbr\u003e\nDodge Ram 1500  1998\u003cbr\u003e\nDodge Ram 1500  1999\u003cbr\u003e\nDodge Ram 1500  2000\u003cbr\u003e\nDodge Ram 1500  2001\u003cbr\u003e\nDodge Ram 2500  1994\u003cbr\u003e\nDodge Ram 2500  1995\u003cbr\u003e\nDodge Ram 2500  1996\u003cbr\u003e\nDodge Ram 2500  1997\u003cbr\u003e\nDodge Ram 2500  1998\u003cbr\u003e\nDodge Ram 2500  1999\u003cbr\u003e\nDodge Ram 2500  2000\u003cbr\u003e\nDodge Ram 2500  2001\u003cbr\u003e\nDodge Ram 2500  2002\u003cbr\u003e\nDodge Ram 2500  2003\u003cbr\u003e\nDodge Ram 2500  2004\u003cbr\u003e\nDodge Ram 2500  2005\u003cbr\u003e\nDodge Ram 2500  2006\u003cbr\u003e\nDodge Ram 2500  2007\u003cbr\u003e\nDodge Ram 2500  2008\u003cbr\u003e\nDodge Ram 2500  2009\u003cbr\u003e\nDodge Ram 2500  2010\u003cbr\u003e\nDodge Ram 3500  1994\u003cbr\u003e\nDodge Ram 3500  1995\u003cbr\u003e\nDodge Ram 3500  1996\u003cbr\u003e\nDodge Ram 3500  1997\u003cbr\u003e\nDodge Ram 3500  1998\u003cbr\u003e\nDodge Ram 3500  1999\u003cbr\u003e\nDodge Ram 3500  2000\u003cbr\u003e\nDodge Ram 3500  2001\u003cbr\u003e\nDodge Ram 3500  2002\u003cbr\u003e\nDodge Ram 3500  2003\u003cbr\u003e\nDodge Ram 3500  2004\u003cbr\u003e\nDodge Ram 3500  2005\u003cbr\u003e\nDodge Ram 3500  2006\u003cbr\u003e\nDodge Ram 3500  2007\u003cbr\u003e\nDodge Ram 3500  2008\u003cbr\u003e\nDodge Ram 3500  2009\u003cbr\u003e\nDodge Ram 3500  2010\u003cbr\u003e\nFord F-250 Super Duty  2017\u003cbr\u003e\nFord F-350 Super Duty  2017\u003cbr\u003e\nJeep Wrangler  2007\u003cbr\u003e\nJeep Wrangler  2008\u003cbr\u003e\nJeep Wrangler  2009\u003cbr\u003e\nJeep Wrangler  2010\u003cbr\u003e\nJeep Wrangler  2011\u003cbr\u003e\nJeep Wrangler  2012\u003cbr\u003e\nJeep Wrangler  2013\u003cbr\u003e\nJeep Wrangler  2014\u003cbr\u003e\nJeep Wrangler  2015\u003cbr\u003e\nJeep Wrangler  2016\u003cbr\u003e\nJeep Wrangler  2017\u003cbr\u003e\nJeep Wrangler JK  2018\u003cbr\u003e\nRam 2500  2011\u003cbr\u003e\nRam 2500  2012\u003cbr\u003e\nRam 2500  2014\u003cbr\u003e\nRam 2500  2015\u003cbr\u003e\nRam 2500  2016\u003cbr\u003e\nRam 2500  2017\u003cbr\u003e\nRam 2500  2018\u003cbr\u003e\nRam 3500  2011\u003cbr\u003e\nRam 3500  2012\u003cbr\u003e\nRam 3500  2013\u003cbr\u003e\nRam 3500  2014\u003cbr\u003e\nRam 3500  2015\u003cbr\u003e\nRam 3500  2016\u003cbr\u003e\nRam 3500  2017\u003cbr\u003e\nRam 3500  2018\u003cbr\u003e\nRam 3500  2019\u003cbr\u003e\nRam 3500  2020\u003cbr\u003e\nRam 3500  2021\u003cbr\u003e\nRam 3500  2022\u003cbr\u003e\nRam 3500  2023\u003cbr\u003e\nRam 3500  2024\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2015\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020\u003cbr\u003e\nToyota Tundra  2021","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67771617378413,"sku":"ZON7700","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/zone_nitro-series-gas-shock-pr_2f32615b-c114-4db3-9ed5-45421be3548b.jpg?v=1792225374"},{"product_id":"bilstein-b6-4600-24-185394-front-suspension-shock-absorber-for-toyota-tundra","title":"Bilstein B6 4600 24-185394 Front Suspension Shock Absorber for Toyota Tundra","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your stock-height Toyota Tundra with the Bilstein B6 4600 shock absorber, part number 24-185394. Designed as a direct-fit replacement for original equipment shocks, this Bilstein absorber helps improve ride quality, handling, and comfort without requiring vehicle modifications. It is engineered for light-truck applications and is specifically tuned for the Toyota Tundra models listed below.\u003c\/p\u003e\n\u003cp\u003eThe B6 4600 uses a monotube internal design and a velocity-sensitive digressive piston to respond quickly to changing road conditions. This configuration provides consistent, fade-resistant damping during daily driving, hauling, and demanding road use. The shock features non-adjustable damping, a yellow-painted finish, a blue straight boot, an upper stem mount, and a 12 mm eye-style lower mount. The spring seat is not included, and the unit does not use an external reservoir.\u003c\/p\u003e\n\u003cp\u003eBilstein develops each B6 4600 application with vehicle-specific tuning to help maintain controlled suspension movement while preserving a comfortable ride. With an extended length of 22.45 inches and a collapsed length of 13.94 inches, this shock absorber is built for the specified suspension configuration. Verify vehicle application and installation position before ordering.\u003c\/p\u003e\n\u003cp\u003eThis Bilstein 24-185394 shock absorber fits 2000–2006 Toyota Tundra models, including model years 2000, 2001, 2002, 2003, 2004, 2005, and 2006. Professional installation is recommended, and all suspension components should be inspected before installation. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit suspension upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\n\u003cli\u003eBilstein B6 4600 series shock absorber, part number 24-185394\u003c\/li\u003e\n\u003cli\u003eVehicle-specific tuning for improved ride quality, handling, and comfort\u003c\/li\u003e\n\u003cli\u003eMonotube internal design for consistent, fade-resistant performance\u003c\/li\u003e\n\u003cli\u003eVelocity-sensitive digressive piston responds to changing road conditions\u003c\/li\u003e\n\u003cli\u003eNon-adjustable damping with no external reservoir\u003c\/li\u003e\n\u003cli\u003eUpper stem mount and 12 mm eye-style lower mount\u003c\/li\u003e\n\u003cli\u003eYellow-painted finish with blue straight protective boot\u003c\/li\u003e\n\u003cli\u003eFits 2000–2006 Toyota Tundra models\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nBoot Included: Blue Straight\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length (Mm): 570.3\u003cbr\u003e\nCollapsed Length (In): 13.94\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nExtended Length (In): 22.45\u003cbr\u003e\nCollapsed Length (Mm): 354.0\u003cbr\u003e\nAaiaid Part Number: BBGL24-185394\u003cbr\u003e\nPart Number: 24-185394\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2000\u003cbr\u003e\nToyota Tundra  2001\u003cbr\u003e\nToyota Tundra  2002\u003cbr\u003e\nToyota Tundra  2003\u003cbr\u003e\nToyota Tundra  2004\u003cbr\u003e\nToyota Tundra  2005\u003cbr\u003e\nToyota Tundra  2006","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771637596269,"sku":"24185394","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-185394_1.jpg?v=1792225907"},{"product_id":"bilstein-b6-4600-front-suspension-shock-absorber-24-185387-for-toyota-tundra-and-sequoia","title":"Bilstein B6 4600 Front Suspension Shock Absorber 24-185387 for Toyota Tundra and Sequoia","description":"B6 4600 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the ride and handling of your stock-height light truck or SUV with the Bilstein B6 4600 suspension shock absorber, part number 24-185387. Designed as a direct-fit replacement for original equipment shock absorbers, this application-specific unit helps provide improved control, comfort, and consistent performance without requiring vehicle modifications. It is compatible with select 2000–2007 Toyota Tundra and 2001–2007 Toyota Sequoia models; verify vehicle fitment before ordering.\u003cbr\u003eThe Bilstein B6 4600 uses a monotube internal design and a velocity-sensitive, digressive piston that responds quickly to changing road conditions. This construction helps deliver fade-resistant performance during demanding driving, while application-specific valving is tuned to support balanced ride quality and handling. The shock absorber uses a non-adjustable damping setup and does not include a remote reservoir, making it a practical upgrade for daily driving, towing, hauling, and light-truck applications.\u003cbr\u003eInstallation is designed around the vehicle’s original springs and mounting hardware. The lower mount uses an eyelet connection, while the upper mount uses a stem configuration. A blue straight protective boot and spring seat are included, and the unit features Bilstein’s recognizable yellow-painted finish. The shock absorber has a compressed length of 13.19 inches and an extended length of 17.94 inches. Professional installation is recommended when required, and all mounting components should be inspected before installation.\u003cbr\u003eThis Bilstein B6 4600 shock absorber is intended for stock-height vehicles and is engineered to restore or enhance suspension performance with a direct-fit design. It fits select 2004 Toyota Tundra, 2004–2007 Toyota Sequoia, 2005–2006 Toyota Tundra, and 2000–2002 Toyota Tundra applications, subject to configuration and position. This product contains a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit upgrade for stock-height light trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVelocity-sensitive digressive piston reacts to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning supports improved ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: B6 4600\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Type: Shocks \/ Struts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Eyelet\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Damping: Non-adjustable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir: None\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot Included: Blue straight boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpring Seat Included: Yes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Yellow paint\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUses OEM springs and mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 13.19 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 17.94 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 14.4mm\u003cbr\u003e\nSeries: B6 4600\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nFinish: Yellow Paint\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nBoot Included: Blue Straight\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nSpring Seat Included: Yes\u003cbr\u003e\nExtended Length (Mm): 455.7\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nCollapsed Length (In): 13.19\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nExtended Length (In): 17.94\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nCollapsed Length (Mm): 335.0\u003cbr\u003e\nAaiaid Part Number: BBGL24-185387\u003cbr\u003e\nPart Number: 24-185387\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Sequoia  2001\u003cbr\u003e\nToyota Sequoia  2002\u003cbr\u003e\nToyota Sequoia  2003\u003cbr\u003e\nToyota Sequoia  2004\u003cbr\u003e\nToyota Sequoia  2005\u003cbr\u003e\nToyota Sequoia  2006\u003cbr\u003e\nToyota Sequoia  2007\u003cbr\u003e\nToyota Tundra  2000\u003cbr\u003e\nToyota Tundra  2001\u003cbr\u003e\nToyota Tundra  2002\u003cbr\u003e\nToyota Tundra  2003\u003cbr\u003e\nToyota Tundra  2004\u003cbr\u003e\nToyota Tundra  2005\u003cbr\u003e\nToyota Tundra  2006","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771638415469,"sku":"24185387","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-185387_1.jpg?v=1792225930"},{"product_id":"bilstein-b8-5100-monotube-front-shock-absorber-24-100144-for-toyota-tundra","title":"Bilstein B8 5100 Monotube Front Shock Absorber 24-100144 for Toyota Tundra","description":"B8 5100 - Suspension Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your Toyota Tundra with the Bilstein B8 5100 shock absorber, part number 24-100144. Designed as a direct-fit solution for lifted trucks and SUVs, this light-truck shock absorber helps improve ride quality, handling, and comfort without requiring adjustable damping or a coilover conversion. It fits select 2000–2006 Toyota Tundra applications and is engineered for dependable performance in demanding driving conditions.\u003cbr\u003eThe Bilstein B8 5100 uses a monotube internal design with a patented digressive piston that responds immediately to changing road and surface conditions. This velocity-sensitive valving helps maintain consistent tire contact and controlled suspension movement, while the application-specific tuning delivers balanced performance for the intended vehicle. The design also helps provide fade-resistant operation during extended or demanding use.\u003cbr\u003eThis smooth-body shock absorber features a zinc-plated finish, a black bellows boot, a stem-style upper mount, and a 12 mm eye-style lower mount. It provides 22.40 inches of extended length, 13.84 inches of collapsed length, and 8.56 inches of suspension travel. The shock uses a 14 mm shaft and 46 mm piston, with no external reservoir or included spring seat. Verify vehicle configuration and suspension lift requirements before installation. Fits 2000, 2001, 2002, 2003, 2004, 2005, and 2006 Toyota Tundra models. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDirect-fit Bilstein B8 5100 shock absorber for select lifted trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube internal design provides consistent, fade-resistant performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePatented velocity-sensitive digressive piston reacts quickly to changing road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific tuning supports improved ride quality, handling, and comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSmooth-body, non-coilover construction with zinc-plated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e22.40-inch extended length and 13.84-inch collapsed length\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e8.56 inches of suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e14 mm shaft diameter and 46 mm piston diameter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStem-style upper mount and 12 mm eye-style lower mount\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack bellows boot included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNon-adjustable damping with no external reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2000–2006 Toyota Tundra applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: Eye 12mm\u003cbr\u003e\nSegment: Light Truck\u003cbr\u003e\nStroke\/Travel Length (Mm): 217.4\u003cbr\u003e\nParttype: Shocks \/ Struts\u003cbr\u003e\nAdjustable Damping: Non-Adjustable\u003cbr\u003e\nSpring Seat Included: No\u003cbr\u003e\nExtended Length (Mm): 569.0\u003cbr\u003e\nTitle: Bilstein Shock Absorbers\u003cbr\u003e\nShaft Diameter: 14mm\u003cbr\u003e\nProp 65 (Y\/N): Y\u003cbr\u003e\nStroke\/Travel Length (In): 8.56\u003cbr\u003e\nPiston Diameter: 46mm\u003cbr\u003e\nSeries: B8 5100\u003cbr\u003e\nFinish: Zinc Plated\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer \u0026amp; Reproductive Harm - www.P65Warnings.ca.gov\u003cbr\u003e\nCollapsed Length (In): 13.84\u003cbr\u003e\nInternal Design: Monotube\u003cbr\u003e\nExtended Length (In): 22.40\u003cbr\u003e\nBody Design: Smooth Body (Non-Coilover)\u003cbr\u003e\nBoot Included: Black Bellows\u003cbr\u003e\nReservoir: No\u003cbr\u003e\nCollapsed Length (Mm): 351.5\u003cbr\u003e\nAaiaid Part Number: BBGL24-100144\u003cbr\u003e\nPart Number: 24-100144\u003cbr\u003e\nBrand Aaia: BBGL\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2000\u003cbr\u003e\nToyota Tundra  2001\u003cbr\u003e\nToyota Tundra  2002\u003cbr\u003e\nToyota Tundra  2003\u003cbr\u003e\nToyota Tundra  2004\u003cbr\u003e\nToyota Tundra  2005\u003cbr\u003e\nToyota Tundra  2006","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67771689173101,"sku":"24100144","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/24-100144_1.jpg?v=1792227006"},{"product_id":"skyjacker-adx-m2-0-adventure-series-aluminum-monotube-shock-m2066-for-2012-2021-toyota-tundra","title":"Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock M2066 for 2012-2021 Toyota Tundra","description":"\u003cp\u003eUpgrade suspension control and ride performance with the Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock, part number M2066. Designed for 2012-2021 Toyota Tundra applications, this gas-charged shock absorber uses modern monotube technology and an innovative, off-road race-inspired full-displaced valving system. The result is consistent damping, improved vehicle control, enhanced driving comfort, and dependable performance across changing road and trail conditions.\u003cbr\u003eThe aluminum shock body helps dissipate heat more efficiently than conventional designs, supporting consistent performance during extended towing, hauling, off-road driving, or demanding suspension use. The 2.11-inch body diameter provides a durable platform for the internal damping system, while the non-remote-reservoir configuration keeps installation straightforward. The shock features a stem-style upper mount and a loop, or eyelet, lower mount with bushing and sleeve for secure attachment to the vehicle’s suspension.\u003cbr\u003eThe Skyjacker M2066 provides a 10.6-inch shock stroke with an 18.2-inch compressed length and a 28.8-inch extended length. It is supplied without a protective boot and is intended for the specified Toyota Tundra fitment. Verify the vehicle’s suspension configuration and application requirements before installation to ensure proper compatibility. This product is designed to deliver improved damping response and control without sacrificing everyday ride quality.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Skyjacker\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: M2066\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: ADX M2.0 Adventure Series aluminum monotube shock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2012-2021 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping System: Full-displaced valving system inspired by off-road racing technology\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Aluminum body for improved heat dissipation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOperation: Gas charged\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 10.6 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompressed Length: 18.2 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 28.8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote Reservoir: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount: Loop eyelet with bushing and sleeve\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtective Boot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Long Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65 Y\/N: N\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nGas Charged: Yes\u003cbr\u003e\nShock Stroke: 10.6 in\u003cbr\u003e\nCompressed Length: 18.2 in\u003cbr\u003e\nRemote Reservoir: No\u003cbr\u003e\nExtended Length: 28.8 in\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nLower Mount Type: Loop (Eyelet) Bushing and Sleeve\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nBody Diameter: 2.11 in\u003cbr\u003e\nAaiaid Part Number: BHNGM2066\u003cbr\u003e\nPart Number: M2066\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2015\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020\u003cbr\u003e\nToyota Tundra  2021","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771712012397,"sku":"M2066","price":176.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/M2066.jpg?v=1792227649"},{"product_id":"skyjacker-adx-m2-0-adventure-series-aluminum-monotube-shock-m2065","title":"Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock M2065","description":"\u003cp\u003eUpgrade off-road control and ride quality with the Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock, Part Number M2065. Designed with modern, race-inspired technology, this gas-charged shock uses a full-displaced valving system to provide consistent damping across changing terrain and driving conditions. The result is improved suspension control, responsive handling, and enhanced comfort for street and trail use.\u003cbr\u003eThe aluminum monotube body helps dissipate heat more effectively than conventional shock designs, supporting consistent performance during extended driving and demanding off-road activity. Its 8.7-inch shock stroke and 16.0-inch compressed length are engineered for the specified applications, while the 24.7-inch extended length helps provide the necessary suspension travel. The shock does not include a remote reservoir or protective boot.\u003cbr\u003eThe Skyjacker M2065 features a stem-style upper mount and a loop-style lower mount with an eyelet bushing and sleeve for dependable installation and movement. The 2.11-inch aluminum body balances strength with efficient heat management. This shock is designed for select 2012–2016 Jeep Wrangler and Toyota Tundra applications; verify vehicle fitment and suspension configuration before ordering. This product carries a California Proposition 65 cancer warning.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFull-displaced valving system: Provides consistent damping and improved control across changing road and off-road conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum monotube body: Promotes better heat dissipation for cooler, more consistent operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGas charged: Supports responsive suspension performance and improved ride control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock stroke: 8.7 inches for application-specific suspension travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompressed length: 16.0 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length: 24.7 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper mount: Stem-style mounting configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower mount: Loop-style eyelet bushing and sleeve\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody diameter: 2.11 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2012–2016 Jeep Wrangler and Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Long Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65 Y\/N: N\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nGas Charged: Yes\u003cbr\u003e\nShock Stroke: 8.7 in\u003cbr\u003e\nCompressed Length: 16.0 in\u003cbr\u003e\nRemote Reservoir: No\u003cbr\u003e\nExtended Length: 24.7 in\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nLower Mount Type: Loop (Eyelet) Bushing and Sleeve\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nBody Diameter: 2.11 in\u003cbr\u003e\nAaiaid Part Number: BHNGM2065\u003cbr\u003e\nPart Number: M2065\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Wrangler  2007\u003cbr\u003e\nJeep Wrangler  2008\u003cbr\u003e\nJeep Wrangler  2009\u003cbr\u003e\nJeep Wrangler  2010\u003cbr\u003e\nJeep Wrangler  2011\u003cbr\u003e\nJeep Wrangler  2012\u003cbr\u003e\nJeep Wrangler  2013\u003cbr\u003e\nJeep Wrangler  2014\u003cbr\u003e\nJeep Wrangler  2015\u003cbr\u003e\nJeep Wrangler  2016\u003cbr\u003e\nJeep Wrangler  2017\u003cbr\u003e\nJeep Wrangler JK  2018\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2015\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020\u003cbr\u003e\nToyota Tundra  2021","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771712766061,"sku":"M2065","price":176.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/M2065.jpg?v=1792227674"},{"product_id":"skyjacker-adx-m2-0-adventure-series-aluminum-monotube-shock-m2062-for-toyota-tundra","title":"Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock M2062 for Toyota Tundra","description":"\u003cp\u003eUpgrade the suspension performance of your compatible Toyota Tundra with the Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock, part number M2062. Designed with modern, race-inspired technology, this gas-charged shock absorber uses a full-displaced valving system to provide consistent damping, improved control, and a more comfortable driving experience on and off the road.\u003cbr\u003eThe ADX M2.0 features Constant Controlled Resistance Performance to help maintain dependable damping as driving conditions change. Its aluminum body promotes cooler operation during demanding use, while the monotube design supports efficient heat dissipation and responsive suspension control. This shock is built for drivers seeking improved handling and durability from a performance-oriented replacement component.\u003cbr\u003eThe Skyjacker M2062 uses a stem-style upper mount and a loop, or eyelet, lower mount with bushing and sleeve. It has a 9.6-inch shock stroke, a 17.2-inch compressed length, and a 26.8-inch extended length. The 2.11-inch aluminum body is not equipped with a remote reservoir or protective boot. This shock is designed for compatible 2012–2021 Toyota Tundra applications; verify vehicle configuration and suspension fitment before installation. This product carries a California Proposition 65 cancer warning.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Skyjacker\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: M2062\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: ADX M2.0 Adventure Series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Type: Aluminum monotube shock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Full-displaced, off-road race-inspired valving system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping: Constant Controlled Resistance Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGas Charged: Yes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Loop (eyelet) with bushing and sleeve\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 9.6 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompressed Length: 17.2 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 26.8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote Reservoir: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot Included: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: 2012–2021 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProp 65 Warning: Cancer - www.p65warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Long Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65 Y\/N: N\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nGas Charged: Yes\u003cbr\u003e\nShock Stroke: 9.6 in\u003cbr\u003e\nCompressed Length: 17.2 in\u003cbr\u003e\nRemote Reservoir: No\u003cbr\u003e\nExtended Length: 26.8 in\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nLower Mount Type: Loop (Eyelet) Bushing and Sleeve\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nBody Diameter: 2.11 in\u003cbr\u003e\nAaiaid Part Number: BHNGM2062\u003cbr\u003e\nPart Number: M2062\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2015\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020\u003cbr\u003e\nToyota Tundra  2021","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771713683565,"sku":"M2062","price":176.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/M2062.jpg?v=1792227697"},{"product_id":"skyjacker-adx-m2-0-adventure-series-aluminum-monotube-shock-m2048-for-2012-2021-toyota-tacoma","title":"Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock M2048 for 2005-2023 Toyota Tacoma","description":"\u003cp\u003eUpgrade the suspension performance of your Toyota Tacoma with the Skyjacker ADX M2.0 Adventure Series Aluminum Monotube Shock, part number M2048. Designed with modern, race-inspired technology, this gas-charged shock uses a full-displaced valving system to deliver consistent damping, improved vehicle control, cooler operation, and a more comfortable driving experience. Its aluminum construction helps dissipate heat efficiently during demanding on-road and off-road use, supporting reliable performance through changing terrain and driving conditions.\u003cbr\u003eThe Skyjacker ADX M2.0 M2048 features a stem-style upper mount and a loop-style lower mount with an eyelet bushing and sleeve for secure installation. The monotube design helps maintain consistent damping performance by separating gas and oil, while the aluminum body offers durability and enhanced heat management. This shock has a 7.5-inch stroke, a 15-inch compressed length, and a 22.5-inch extended length. It is not equipped with a remote reservoir or protective boot, making it a straightforward replacement or upgrade for compatible suspension applications.\u003cbr\u003eThis Skyjacker shock is designed to fit 2012 through 2021 Toyota Tacoma models. Verify the vehicle’s suspension configuration, mounting style, and application requirements before ordering to ensure proper fitment. The ADX M2.0 Adventure Series is a practical choice for drivers seeking responsive damping, dependable construction, and improved handling for daily driving, hauling, trail use, and other demanding conditions.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Skyjacker\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: M2048\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeries: ADX M2.0 Adventure Series\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2012-2021 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Aluminum monotube shock with full-displaced valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOperation: Gas charged for consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 7.5 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompressed Length: 15 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.5 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: Loop eyelet with bushing and sleeve\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Diameter: 2.11 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote Reservoir: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot Included: No\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nProp 65   Long Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65   Short Label: WARNING: Cancer - www.p65warnings.ca.gov\u003cbr\u003e\nProp 65 Y\/N: N\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nGas Charged: Yes\u003cbr\u003e\nShock Stroke: 7.5 in\u003cbr\u003e\nCompressed Length: 15.0 in\u003cbr\u003e\nRemote Reservoir: No\u003cbr\u003e\nExtended Length: 22.5 in\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nLower Mount Type: Loop (Eyelet) Bushing and Sleeve\u003cbr\u003e\nBody Material: Aluminum\u003cbr\u003e\nBody Diameter: 2.11 in\u003cbr\u003e\nAaiaid Part Number: BHNGM2048\u003cbr\u003e\nPart Number: M2048\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma  2005\u003cbr\u003e\nToyota Tacoma  2006\u003cbr\u003e\nToyota Tacoma  2007\u003cbr\u003e\nToyota Tacoma  2008\u003cbr\u003e\nToyota Tacoma  2009\u003cbr\u003e\nToyota Tacoma  2010\u003cbr\u003e\nToyota Tacoma  2011\u003cbr\u003e\nToyota Tacoma  2012\u003cbr\u003e\nToyota Tacoma  2013\u003cbr\u003e\nToyota Tacoma  2014\u003cbr\u003e\nToyota Tacoma  2015\u003cbr\u003e\nToyota Tacoma  2016\u003cbr\u003e\nToyota Tacoma  2017\u003cbr\u003e\nToyota Tacoma  2018\u003cbr\u003e\nToyota Tacoma  2019\u003cbr\u003e\nToyota Tacoma  2020\u003cbr\u003e\nToyota Tacoma  2021\u003cbr\u003e\nToyota Tacoma  2022\u003cbr\u003e\nToyota Tacoma  2023\u003cbr\u003e\nToyota Tundra  2000\u003cbr\u003e\nToyota Tundra  2001\u003cbr\u003e\nToyota Tundra  2002\u003cbr\u003e\nToyota Tundra  2003\u003cbr\u003e\nToyota Tundra  2004\u003cbr\u003e\nToyota Tundra  2005\u003cbr\u003e\nToyota Tundra  2006","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771721416813,"sku":"M2048","price":176.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/M2048.jpg?v=1792227807"},{"product_id":"skyjacker-h7066-hydro-shock-absorber-with-red-boot-for-toyota-tundra","title":"Skyjacker H7066 Hydro Shock Absorber with Red Boot for Toyota Tundra","description":"\u003cp\u003eThe Skyjacker H7066 Hydro Shock Absorber is designed to help control suspension movement and improve ride stability on compatible Toyota Tundra applications. This high-quality hydraulic shock absorber uses true velocity-sensitive valving to respond according to suspension movement, helping manage the energy stored in the vehicle’s springs during compression and rebound. The included red protective boot helps shield the shock absorber from road debris and everyday contamination.\u003cbr\u003eDesigned for controlled performance, the Skyjacker H7066 uses multi-stage velocity-sensitive valving to provide damping that changes with shock shaft speed. During compression, the shock helps regulate suspension movement as the vehicle encounters bumps or load changes. During rebound, it helps control spring extension for improved handling and a more composed ride. This design supports consistent suspension control for trucks used on the street, for hauling, or in demanding driving conditions.\u003cbr\u003eThe Skyjacker H7066 is compatible with select 2007–2017 Toyota Tundra models. It features a 16.5-inch collapsed length, a 28.75-inch extended length, and 12.25 inches of shock stroke. Verify vehicle fitment and suspension configuration before ordering. This product carries a California Proposition 65 warning: Cancer and\/or other reproductive harm. For more information, visit www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Skyjacker\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: H7066\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Hydro shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtective Boot: Red boot helps protect the shock from road debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving: Multi-stage velocity-sensitive valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 16.5 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 28.75 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 12.25 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2007–2017 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 16.500 in.\u003cbr\u003e\nExtended Length: 28.750 in.\u003cbr\u003e\nShock Stroke: 12.250 in.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nProp 65 Short Label: California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov)\u003cbr\u003e\nAaiaid Part Number: BHNGH7066\u003cbr\u003e\nPart Number: H7066\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra 2007\u003cbr\u003e\nToyota Tundra 2008\u003cbr\u003e\nToyota Tundra 2009\u003cbr\u003e\nToyota Tundra 2010\u003cbr\u003e\nToyota Tundra 2011\u003cbr\u003e\nToyota Tundra 2012\u003cbr\u003e\nToyota Tundra 2013\u003cbr\u003e\nToyota Tundra 2014\u003cbr\u003e\nToyota Tundra 2015\u003cbr\u003e\nToyota Tundra 2016\u003cbr\u003e\nToyota Tundra 2017","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771793866861,"sku":"H7066","price":51.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/H7066.jpg?v=1792229609"},{"product_id":"skyjacker-hydro-shock-absorber-h7062-with-red-boot-for-toyota-tundra","title":"Skyjacker Hydro Shock Absorber H7062 with Red Boot for Toyota Tundra","description":"\u003cp\u003eUpgrade suspension control with the Skyjacker Hydro Shock Absorber H7062, designed to help manage spring energy and improve ride stability on select Toyota Tundra applications. This high-quality hydraulic shock absorber uses true velocity-sensitive valving to respond according to suspension movement, helping control compression over bumps and rebound as the suspension extends. The red protective boot adds a distinctive finish while helping shield the shock shaft from road debris.\u003cbr\u003eThe Skyjacker H7062 uses multi-stage velocity-sensitive valving for controlled performance across changing road conditions. Shock absorbers do not support the vehicle or absorb bumps independently; instead, they regulate the energy stored in the suspension springs. By controlling compression and rebound rates, this Hydro Shock helps reduce excessive suspension movement and promotes a more composed ride during everyday driving and varying loads.\u003cbr\u003eThis Skyjacker shock absorber is designed for select 2007–2009 and 2012–2018 Toyota Tundra models. The H7062 has a collapsed length of 15.440 inches, an extended length of 25.750 inches, and a shock stroke of 10.310 inches. Verify vehicle fitment and suspension configuration before ordering. This product carries a California Proposition 65 warning: Cancer and\/or other reproductive harm. For more information, visit www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Skyjacker\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: H7062\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Hydro shock absorber with red protective boot\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving: Multi-stage velocity-sensitive valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 15.440 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 25.750 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 10.310 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2007–2009 and 2012–2018 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 15.440 in.\u003cbr\u003e\nExtended Length: 25.750 in.\u003cbr\u003e\nShock Stroke: 10.310 in.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nProp 65 Short Label: California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov)\u003cbr\u003e\nAaiaid Part Number: BHNGH7062\u003cbr\u003e\nPart Number: H7062\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra 2007\u003cbr\u003e\nToyota Tundra 2008\u003cbr\u003e\nToyota Tundra 2009\u003cbr\u003e\nToyota Tundra 2010\u003cbr\u003e\nToyota Tundra 2011\u003cbr\u003e\nToyota Tundra 2012\u003cbr\u003e\nToyota Tundra 2013\u003cbr\u003e\nToyota Tundra 2014\u003cbr\u003e\nToyota Tundra 2015\u003cbr\u003e\nToyota Tundra 2016\u003cbr\u003e\nToyota Tundra 2017\u003cbr\u003e\nToyota Tundra 2018","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771796815981,"sku":"H7062","price":51.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/H7062.jpg?v=1792229670"},{"product_id":"skyjacker-h7048-hydro-shock-absorber-with-red-boot","title":"Skyjacker H7048 Hydro Shock Absorber with Red Boot","description":"\u003cp\u003eUpgrade suspension control with the Skyjacker H7048 Hydro Shock Absorber, engineered with true velocity-sensitive valving for consistent performance over changing road conditions. This Hydro Shock absorber helps manage the energy stored in suspension springs, controlling compression when the suspension moves upward and rebound when it extends. The result is improved damping control, a more composed ride, and dependable support for daily driving or off-road use.\u003cbr\u003eThe Skyjacker H7048 uses multi-stage velocity-sensitive valving to respond according to suspension movement speed. This design helps provide controlled operation over bumps, dips, and varying surface conditions while supporting stable handling and suspension performance. A durable red protective boot helps shield the shock absorber shaft from road debris and environmental contaminants, contributing to long-term serviceability.\u003cbr\u003eDesigned for select Toyota applications, the Skyjacker H7048 fits 2012–2018 Toyota Tacoma models and select 2004–2005 Toyota Tundra and 2005 Toyota Tacoma applications. It features a collapsed length of 13.540 inches, an extended length of 22.750 inches, and 9.210 inches of shock stroke. Verify vehicle fitment and suspension configuration before installation. This product contains a California Proposition 65 warning for potential cancer and reproductive harm; visit www.p65warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Skyjacker\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: H7048\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Hydro shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBoot Color: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving: Multi-stage velocity-sensitive valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 13.540 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.750 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 9.210 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select 2004–2005 Toyota Tundra, 2005 Toyota Tacoma, and 2012–2018 Toyota Tacoma applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProp 65: California warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 13.540 in.\u003cbr\u003e\nExtended Length: 22.750 in.\u003cbr\u003e\nShock Stroke: 9.210 in.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nProp 65 Short Label: California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov)\u003cbr\u003e\nAaiaid Part Number: BHNGH7048\u003cbr\u003e\nPart Number: H7048\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma 2005\u003cbr\u003e\nToyota Tacoma 2006\u003cbr\u003e\nToyota Tacoma 2007\u003cbr\u003e\nToyota Tacoma 2008\u003cbr\u003e\nToyota Tacoma 2009\u003cbr\u003e\nToyota Tacoma 2010\u003cbr\u003e\nToyota Tacoma 2011\u003cbr\u003e\nToyota Tacoma 2012\u003cbr\u003e\nToyota Tacoma 2013\u003cbr\u003e\nToyota Tacoma 2014\u003cbr\u003e\nToyota Tacoma 2015\u003cbr\u003e\nToyota Tacoma 2016\u003cbr\u003e\nToyota Tacoma 2017\u003cbr\u003e\nToyota Tacoma 2018\u003cbr\u003e\nToyota Tundra 2000\u003cbr\u003e\nToyota Tundra 2001\u003cbr\u003e\nToyota Tundra 2002\u003cbr\u003e\nToyota Tundra 2003\u003cbr\u003e\nToyota Tundra 2004\u003cbr\u003e\nToyota Tundra 2005\u003cbr\u003e\nToyota Tundra 2006","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771803598957,"sku":"H7048","price":51.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/H7048.jpg?v=1792229921"},{"product_id":"fabtech-dirt-logic-2-25-shock-absorber-fts81164-for-2022-2026-toyota-tundra","title":"Fabtech Dirt Logic 2.25 Shock Absorber FTS81164 for 2022-2026 Toyota Tundra","description":"\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra suspension with the Fabtech Dirt Logic 2.25 Shock Absorber, part number FTS81164. Designed as a replacement for factory shocks, this larger, more robust shock absorber helps deliver a controlled, comfortable ride on both pavement and challenging off-road terrain. Its take-apart configuration supports serviceability and long-term performance for demanding truck applications.\u003cbr\u003eThe Dirt Logic 2.25 is pre-tuned specifically for Fabtech suspension systems, accounting for larger tires and the unique demands of modified Tundra platforms. This application-specific tuning helps provide balanced damping, improved vehicle control, and consistent suspension performance across a wide range of driving conditions. The result is a shock absorber engineered for drivers who want dependable handling without sacrificing off-road capability.\u003cbr\u003eFabtech part number FTS81164 features a collapsed length of 17.42 inches, an extended length of 27.03 inches, and 9.61 inches of shock travel. It is designed to fit 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models. Professional installation is recommended to ensure proper fitment and suspension setup. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Replacement shock absorber for 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Dirt Logic 2.25 take-apart shock with a larger, more robust configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Pre-tuned for Fabtech suspension systems and larger tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRide Quality: Provides controlled damping for on-road comfort and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 17.42 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 27.03 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 9.61 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS81164\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 17.42\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nExtended Length: 27.03 in\u003cbr\u003e\nShock Stroke: 9.61 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS81164\u003cbr\u003e\nPart Number: FTS81164\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771812872301,"sku":"FTS81164","price":340.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/dirt-logic-225-nr-shock_FTS81164_REAR.png?v=1792230604"},{"product_id":"fabtech-dirt-logic-2-25-shock-absorber-fts810982-for-toyota-tundra","title":"Fabtech Dirt Logic 2.25 Shock Absorber FTS810982 for Toyota Tundra","description":"\u003cp\u003eUpgrade your truck’s off-road performance with the Fabtech Dirt Logic 2.25 Shock Absorber, part number FTS810982. Designed for select Toyota Tundra applications, this shock delivers dependable control, improved ride quality, and long-term durability in demanding driving conditions. It fits Toyota Tundra models from 2007 and 2012 through 2020, providing a performance-focused replacement for suspension systems that require enhanced damping.\u003c\/p\u003e\n\u003cp\u003eThe Dirt Logic 2.25 features a high-grade 304 stainless steel shock body with a detailed machined finish for excellent corrosion resistance and a clean appearance. Its black anodized 6061 aluminum reservoir helps dissipate heat efficiently, keeping the shock cooler and reducing fade during aggressive off-road use. A NitroSteel piston rod provides a hard, durable surface with increased corrosion resistance compared with conventional chrome-plated rods.\u003c\/p\u003e\n\u003cp\u003eFabtech designed this shock with urethane mounting bushings to help reduce road noise and rattling commonly associated with spherical bearings. The result is a more controlled and refined ride on pavement while retaining the strength and performance needed for rough terrain. With an 8.8-inch stroke and a 17-inch collapsed length, this shock is engineered to support consistent suspension movement across a wide range of driving conditions.\u003c\/p\u003e\n\u003cp\u003eFeatures: 304 stainless steel shock body for corrosion resistance; black anodized 6061 aluminum reservoir for improved heat dissipation; NitroSteel piston rod for durability and corrosion resistance; urethane mounting bushings to reduce noise and vibration; engineered for outstanding performance and longevity. California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel shock body provides excellent corrosion resistance and a durable machined finish\u003c\/li\u003e\n\u003cli\u003eBlack anodized 6061 aluminum reservoir helps dissipate heat and reduce shock fade\u003c\/li\u003e\n\u003cli\u003eNitroSteel piston rod offers a hard, durable surface with increased corrosion resistance\u003c\/li\u003e\n\u003cli\u003eUrethane mounting bushings help reduce road noise and rattling\u003c\/li\u003e\n\u003cli\u003e8.8-inch shock stroke supports controlled suspension movement\u003c\/li\u003e\n\u003cli\u003eFits select 2007 and 2012–2020 Toyota Tundra applications\u003c\/li\u003e\n\u003cli\u003eDesigned for outstanding performance and long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 17\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 25.8 in\u003cbr\u003e\nShock Stroke: 8.8 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS810982\u003cbr\u003e\nPart Number: FTS810982\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2015\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771829059693,"sku":"FTS810982","price":340.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS810982-beauty.jpg?v=1792231023"},{"product_id":"fabtech-fts77236-performance-suspension-shock-absorber-with-mounting-hardware","title":"Fabtech FTS77236 Performance Suspension Shock Absorber with Mounting Hardware","description":"\u003cp\u003eUpgrade suspension control and ride performance with the Fabtech FTS77236 Performance Suspension Shock Absorber. Designed for select Ford Super Duty and Ram heavy-duty applications, this shock absorber uses a twin-tube internal construction and alloy steel body to provide dependable performance under demanding driving conditions. Its performance-grade design supports improved damping control for work trucks, towing applications, and off-road use.\u003cbr\u003eThe Fabtech FTS77236 features an EB1 lower mount and stem-style upper mount for application-specific installation. Mounting hardware is included to help simplify installation, while the durable white body provides a clean, recognizable Fabtech appearance. The shock absorber has a 10.16-inch stroke and a 24.8-inch extended length. A protective boot is not included, allowing compatibility with installation configurations that do not require one.\u003cbr\u003eThis Fabtech suspension shock absorber fits select 2012 and 2013 Ford F-250 Super Duty models, select 2012 and 2013 Ford F-350 Super Duty models, and select 2014 and 2019 Ram 2500 and 2020 Ram 3500 applications. Verify vehicle year, model, suspension configuration, and mount requirements before ordering. Professional installation is recommended when replacing suspension components. WARNING: Cancer and Reproductive Harm—www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS77236\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Performance suspension shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Material: Alloy steel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody Color: White\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Construction: Twin tube\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eGrade Type: Performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower Mount Type: EB1\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUpper Mount Type: Stem\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 10.16 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 24.8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting Hardware: Included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProtective Boot: Not included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Select Ford F-250 Super Duty, Ford F-350 Super Duty, Ram 2500, and Ram 3500 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nLower Mount Type: EB1\u003cbr\u003e\nShock Stroke: 10.16\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov\u003cbr\u003e\nBody Color: White\u003cbr\u003e\nBody Material: Alloy Steel\u003cbr\u003e\nBoot Included: No\u003cbr\u003e\nExtended Length: 24.8 in\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nInternal Construction Type: Twin Tube\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nUpper Mount Type: Stem\u003cbr\u003e\nAaiaid Part Number: BKBNFTS77236\u003cbr\u003e\nPart Number: FTS77236\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nDodge Ram 1500  1994\u003cbr\u003e\nDodge Ram 1500  1995\u003cbr\u003e\nDodge Ram 1500  1996\u003cbr\u003e\nDodge Ram 1500  1997\u003cbr\u003e\nDodge Ram 1500  1998\u003cbr\u003e\nDodge Ram 1500  1999\u003cbr\u003e\nDodge Ram 1500  2000\u003cbr\u003e\nDodge Ram 1500  2001\u003cbr\u003e\nFord Excursion  2000\u003cbr\u003e\nFord Excursion  2001\u003cbr\u003e\nFord Excursion  2002\u003cbr\u003e\nFord Excursion  2003\u003cbr\u003e\nFord Excursion  2004\u003cbr\u003e\nFord Excursion  2005\u003cbr\u003e\nFord F-150  1997\u003cbr\u003e\nFord F-150  1998\u003cbr\u003e\nFord F-150  1999\u003cbr\u003e\nFord F-150  2000\u003cbr\u003e\nFord F-150  2001\u003cbr\u003e\nFord F-150  2002\u003cbr\u003e\nFord F-150  2003\u003cbr\u003e\nFord F-150 Heritage  2004\u003cbr\u003e\nFord F-250 Super Duty  1999\u003cbr\u003e\nFord F-250 Super Duty  2000\u003cbr\u003e\nFord F-250 Super Duty  2001\u003cbr\u003e\nFord F-250 Super Duty  2002\u003cbr\u003e\nFord F-250 Super Duty  2003\u003cbr\u003e\nFord F-250 Super Duty  2004\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-250 Super Duty  2009\u003cbr\u003e\nFord F-250 Super Duty  2010\u003cbr\u003e\nFord F-250 Super Duty  2011\u003cbr\u003e\nFord F-250 Super Duty  2012\u003cbr\u003e\nFord F-250 Super Duty  2013\u003cbr\u003e\nFord F-250 Super Duty  2023\u003cbr\u003e\nFord F-250 Super Duty  2024\u003cbr\u003e\nFord F-250 Super Duty  2025\u003cbr\u003e\nFord F-250 Super Duty  2026\u003cbr\u003e\nFord F-350 Super Duty  1999\u003cbr\u003e\nFord F-350 Super Duty  2000\u003cbr\u003e\nFord F-350 Super Duty  2001\u003cbr\u003e\nFord F-350 Super Duty  2002\u003cbr\u003e\nFord F-350 Super Duty  2003\u003cbr\u003e\nFord F-350 Super Duty  2004\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2009\u003cbr\u003e\nFord F-350 Super Duty  2010\u003cbr\u003e\nFord F-350 Super Duty  2011\u003cbr\u003e\nFord F-350 Super Duty  2012\u003cbr\u003e\nFord F-350 Super Duty  2023\u003cbr\u003e\nFord F-350 Super Duty  2024\u003cbr\u003e\nFord F-350 Super Duty  2025\u003cbr\u003e\nFord F-350 Super Duty  2026\u003cbr\u003e\nJeep Wrangler  2007\u003cbr\u003e\nJeep Wrangler  2008\u003cbr\u003e\nJeep Wrangler  2009\u003cbr\u003e\nJeep Wrangler  2010\u003cbr\u003e\nJeep Wrangler  2011\u003cbr\u003e\nRam 2500  2014\u003cbr\u003e\nRam 2500  2019\u003cbr\u003e\nRam 2500  2020\u003cbr\u003e\nRam 3500  2020\u003cbr\u003e\nToyota Tundra  2000\u003cbr\u003e\nToyota Tundra  2001\u003cbr\u003e\nToyota Tundra  2002\u003cbr\u003e\nToyota Tundra  2003\u003cbr\u003e\nToyota Tundra  2004\u003cbr\u003e\nToyota Tundra  2005\u003cbr\u003e\nToyota Tundra  2006","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771891646573,"sku":"FTS77236","price":58.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/Fabtech-FTS77236-Performance-Shock.jpg?v=1792231799"},{"product_id":"fabtech-fts7236-performance-shock-absorber-for-ford-f-250-f-350-and-ram-2500-3500","title":"Fabtech FTS7236 Performance Shock Absorber for Ford F-250, F-350 and Ram 2500\/3500","description":"\u003cp\u003eThe Fabtech FTS7236 Performance Shock Absorber is engineered to provide dependable ride control for select Ford F-250 Super Duty, Ford F-350 Super Duty, Ram 2500, and Ram 3500 applications. Designed to work with Fabtech lift kits, this shock absorber helps maintain controlled suspension movement and consistent performance on the street, trail, and at higher speeds.\u003cbr\u003eFabtech Performance Shocks use high-velocity 9-stage valving to deliver effective damping across varying driving conditions. A closed-cell insert helps reduce shock fade during high-speed operation, supporting more consistent control when the suspension is working hard. The FTS7236 is designed as part of a properly matched suspension system for improved handling and ride quality.\u003cbr\u003eWith a collapsed length of 14.58 inches, an extended length of 24.77 inches, and 10.19 inches of shock travel, the Fabtech FTS7236 provides suspension movement suited to compatible lifted applications. Verify vehicle year, model, suspension configuration, and lift-kit compatibility before installation. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDesigned to work with Fabtech lift kits\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh-velocity 9-stage valving for controlled damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eClosed-cell insert helps reduce shock fade at high speeds\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length: 14.58 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length: 24.77 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock stroke: 10.19 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2012-2013 Ford F-250 Super Duty applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2012-2013 Ford F-350 Super Duty applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2014 and 2019 Ram 2500 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2020 Ram 3500 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 14.58\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 24.77 in\u003cbr\u003e\nShock Stroke: 10.19 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS7236\u003cbr\u003e\nPart Number: FTS7236\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nDodge Ram 1500  1994\u003cbr\u003e\nDodge Ram 1500  1995\u003cbr\u003e\nDodge Ram 1500  1996\u003cbr\u003e\nDodge Ram 1500  1997\u003cbr\u003e\nDodge Ram 1500  1998\u003cbr\u003e\nDodge Ram 1500  1999\u003cbr\u003e\nDodge Ram 1500  2000\u003cbr\u003e\nDodge Ram 1500  2001\u003cbr\u003e\nFord Excursion  2000\u003cbr\u003e\nFord Excursion  2001\u003cbr\u003e\nFord Excursion  2002\u003cbr\u003e\nFord Excursion  2003\u003cbr\u003e\nFord Excursion  2004\u003cbr\u003e\nFord Excursion  2005\u003cbr\u003e\nFord F-150  1997\u003cbr\u003e\nFord F-150  1998\u003cbr\u003e\nFord F-150  1999\u003cbr\u003e\nFord F-150  2000\u003cbr\u003e\nFord F-150  2001\u003cbr\u003e\nFord F-150  2002\u003cbr\u003e\nFord F-150  2003\u003cbr\u003e\nFord F-150 Heritage  2004\u003cbr\u003e\nFord F-250 Super Duty  1999\u003cbr\u003e\nFord F-250 Super Duty  2000\u003cbr\u003e\nFord F-250 Super Duty  2001\u003cbr\u003e\nFord F-250 Super Duty  2002\u003cbr\u003e\nFord F-250 Super Duty  2003\u003cbr\u003e\nFord F-250 Super Duty  2004\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-250 Super Duty  2009\u003cbr\u003e\nFord F-250 Super Duty  2010\u003cbr\u003e\nFord F-250 Super Duty  2011\u003cbr\u003e\nFord F-250 Super Duty  2012\u003cbr\u003e\nFord F-250 Super Duty  2013\u003cbr\u003e\nFord F-250 Super Duty  2023\u003cbr\u003e\nFord F-250 Super Duty  2024\u003cbr\u003e\nFord F-250 Super Duty  2025\u003cbr\u003e\nFord F-250 Super Duty  2026\u003cbr\u003e\nFord F-350 Super Duty  1999\u003cbr\u003e\nFord F-350 Super Duty  2000\u003cbr\u003e\nFord F-350 Super Duty  2001\u003cbr\u003e\nFord F-350 Super Duty  2002\u003cbr\u003e\nFord F-350 Super Duty  2003\u003cbr\u003e\nFord F-350 Super Duty  2004\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2009\u003cbr\u003e\nFord F-350 Super Duty  2010\u003cbr\u003e\nFord F-350 Super Duty  2011\u003cbr\u003e\nFord F-350 Super Duty  2012\u003cbr\u003e\nFord F-350 Super Duty  2023\u003cbr\u003e\nFord F-350 Super Duty  2024\u003cbr\u003e\nFord F-350 Super Duty  2025\u003cbr\u003e\nFord F-350 Super Duty  2026\u003cbr\u003e\nJeep Wrangler  2007\u003cbr\u003e\nJeep Wrangler  2008\u003cbr\u003e\nJeep Wrangler  2009\u003cbr\u003e\nJeep Wrangler  2010\u003cbr\u003e\nJeep Wrangler  2011\u003cbr\u003e\nRam 2500  2014\u003cbr\u003e\nRam 2500  2019\u003cbr\u003e\nRam 2500  2020\u003cbr\u003e\nRam 3500  2020\u003cbr\u003e\nToyota Tundra  2000\u003cbr\u003e\nToyota Tundra  2001\u003cbr\u003e\nToyota Tundra  2002\u003cbr\u003e\nToyota Tundra  2003\u003cbr\u003e\nToyota Tundra  2004\u003cbr\u003e\nToyota Tundra  2005\u003cbr\u003e\nToyota Tundra  2006","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771924447341,"sku":"FTS7236","price":57.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS7236-beauty.jpg?v=1792232236"},{"product_id":"fabtech-performance-shock-absorber-fts7189-for-ram-2500-ram-3500-and-toyota-tundra","title":"Fabtech Performance Shock Absorber FTS7189 for Ram 2500, Ram 3500 and Toyota Tundra","description":"\u003cp\u003eImprove suspension control with the Fabtech Performance Shock Absorber FTS7189, engineered to work with select Fabtech lift kits and suspension systems. This shock absorber is designed to provide controlled handling, improved damping performance, and a more composed ride across changing road and trail conditions. It fits select 2012–2013 Ram 2500 and Ram 3500 models, as well as select 2012–2019 Toyota Tundra applications.\u003cbr\u003eThe Fabtech FTS7189 uses high-velocity 9-stage valving to manage suspension movement effectively while maintaining consistent ride control. A closed-cell insert helps reduce shock fade during high-speed operation, supporting dependable performance when the suspension is working hard. The extended length is 28.39 inches, the collapsed length is 16.36 inches, and the shock stroke is 12.03 inches. Verify vehicle and lift-kit compatibility before installation.\u003cbr\u003eDesigned for use with Fabtech suspension systems, this performance shock absorber is a practical replacement or upgrade for applications requiring enhanced damping and suspension control. Professional installation is recommended, and suspension components should be inspected for proper fitment before installation. This product contains a California Proposition 65 warning regarding cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePerformance Shock: Fabtech performance shock absorber designed to work with select Fabtech lift kits and suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh-Velocity Valving: 9-stage valving provides controlled damping and improved ride management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFade Resistance: Closed-cell insert helps reduce shock fade during high-speed operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 28.39 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 16.36 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 12.03 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Fits select 2012–2013 Ram 2500 and Ram 3500 models and select 2012–2019 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS7189\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 16.36\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 28.39 in\u003cbr\u003e\nShock Stroke: 12.03 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS7189\u003cbr\u003e\nPart Number: FTS7189\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nDodge Ram 2500  2003\u003cbr\u003e\nDodge Ram 2500  2004\u003cbr\u003e\nDodge Ram 2500  2005\u003cbr\u003e\nDodge Ram 2500  2006\u003cbr\u003e\nDodge Ram 2500  2007\u003cbr\u003e\nDodge Ram 2500  2008\u003cbr\u003e\nDodge Ram 2500  2009\u003cbr\u003e\nDodge Ram 2500  2010\u003cbr\u003e\nDodge Ram 3500  2003\u003cbr\u003e\nDodge Ram 3500  2004\u003cbr\u003e\nDodge Ram 3500  2005\u003cbr\u003e\nDodge Ram 3500  2006\u003cbr\u003e\nDodge Ram 3500  2007\u003cbr\u003e\nDodge Ram 3500  2008\u003cbr\u003e\nDodge Ram 3500  2009\u003cbr\u003e\nDodge Ram 3500  2010\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nRam 2500  2011\u003cbr\u003e\nRam 2500  2012\u003cbr\u003e\nRam 2500  2013\u003cbr\u003e\nRam 3500  2011\u003cbr\u003e\nRam 3500  2012\u003cbr\u003e\nRam 3500  2013\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771933851757,"sku":"FTS7189","price":58.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts7189-kit.jpg?v=1792232372"},{"product_id":"fabtech-fts7188-performance-shock-absorber-for-select-ford-jeep-and-toyota-applications","title":"Fabtech FTS7188 Performance Shock Absorber for Select Ford, Jeep, and Toyota Applications","description":"\u003cp\u003eThe Fabtech FTS7188 Performance Shock Absorber is engineered to work with compatible Fabtech lift kits and suspension systems, providing controlled handling and improved ride quality for demanding on- and off-road use. Its high-velocity 9-stage valving helps deliver consistent damping across changing terrain, while the closed-cell insert helps reduce shock fade during extended high-speed driving.\u003cbr\u003eDesigned as a replacement or upgrade for select suspension applications, the Fabtech FTS7188 supports predictable suspension movement and enhanced ride control. The shock absorber has a 16.09-inch collapsed length, a 27.36-inch extended length, and an 11.27-inch stroke, making it suitable for configurations requiring this specific travel range. Always verify vehicle and suspension compatibility before installation.\u003cbr\u003eThe Fabtech FTS7188 fits select Ford F-250 Super Duty, Ford F-350 Super Duty, Jeep Wrangler, and Toyota Tundra applications from specified model years. It is built for use with Fabtech suspension components and should be installed according to the vehicle and lift kit manufacturer’s instructions. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePerformance shock absorber designed for use with compatible Fabtech lift kits and suspension systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh-velocity 9-stage valving provides controlled damping and improved ride management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eClosed-cell insert helps reduce shock fade during high-speed operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length: 27.36 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length: 16.09 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock stroke: 11.27 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select Ford F-250 Super Duty, Ford F-350 Super Duty, Jeep Wrangler, and Toyota Tundra applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 16.09\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 27.36 in\u003cbr\u003e\nShock Stroke: 11.27 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS7188\u003cbr\u003e\nPart Number: FTS7188\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-250 Super Duty  2009\u003cbr\u003e\nFord F-250 Super Duty  2010\u003cbr\u003e\nFord F-250 Super Duty  2011\u003cbr\u003e\nFord F-250 Super Duty  2012\u003cbr\u003e\nFord F-250 Super Duty  2013\u003cbr\u003e\nFord F-250 Super Duty  2017\u003cbr\u003e\nFord F-250 Super Duty  2018\u003cbr\u003e\nFord F-250 Super Duty  2019\u003cbr\u003e\nFord F-250 Super Duty  2020\u003cbr\u003e\nFord F-250 Super Duty  2023\u003cbr\u003e\nFord F-250 Super Duty  2024\u003cbr\u003e\nFord F-250 Super Duty  2025\u003cbr\u003e\nFord F-250 Super Duty  2026\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2017\u003cbr\u003e\nFord F-350 Super Duty  2018\u003cbr\u003e\nFord F-350 Super Duty  2019\u003cbr\u003e\nFord F-350 Super Duty  2020\u003cbr\u003e\nFord F-350 Super Duty  2023\u003cbr\u003e\nFord F-350 Super Duty  2024\u003cbr\u003e\nFord F-350 Super Duty  2025\u003cbr\u003e\nFord F-350 Super Duty  2026\u003cbr\u003e\nJeep Wrangler  2007\u003cbr\u003e\nJeep Wrangler  2008\u003cbr\u003e\nJeep Wrangler  2012\u003cbr\u003e\nRam 1500  2019\u003cbr\u003e\nRam 1500  2020\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020\u003cbr\u003e\nToyota Tundra  2021\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771934834797,"sku":"FTS7188","price":58.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts7188-kit.jpg?v=1792232389"},{"product_id":"skyjacker-black-max-shock-absorber-b8548-for-toyota-tacoma-and-tundra","title":"Skyjacker Black MAX Shock Absorber B8548 for Toyota Tacoma and Tundra","description":"\u003cp\u003eUpgrade suspension control with the Skyjacker Black MAX Shock Absorber B8548, engineered for dependable performance on compatible Toyota Tacoma and Toyota Tundra applications. This twin-tube shock absorber uses advanced foam-cell technology to help maintain consistent damping performance as operating temperatures change. When the shock absorber heats up, the foam-cell insert compresses to compensate for oil expansion, helping preserve responsive handling and ride control throughout the shock’s operating range.\u003cbr\u003eThe foam-cell design also eliminates air inside the shock absorber, allowing flexible mounting orientation while supporting reliable operation. Select-specific valving is matched to the application to provide controlled suspension movement, while arc-welded end mounts add durability for demanding driving conditions. The Skyjacker Black MAX B8548 is designed to deliver practical suspension performance and long-term value for drivers seeking a dependable replacement shock absorber.\u003cbr\u003eThis Skyjacker shock absorber fits select 2005–2018 Toyota Tacoma and 2004–2005 Toyota Tundra models. Confirm vehicle year, model, and application compatibility before ordering. The product has a collapsed length of 13.540 inches, an extended length of 22.750 inches, and a shock stroke of 9.210 inches. California Proposition 65 warning: This product can expose you to chemicals known to the State of California to cause cancer and\/or reproductive harm. For more information, visit www.p65warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAdvanced foam-cell technology helps compensate for oil expansion and maintain consistent shock performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwin-tube construction provides dependable suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFoam-cell design eliminates air inside the shock for flexible mounting orientation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSelect-specific valving supports controlled ride and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eArc-welded end mounts provide durable attachment points\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select 2005–2018 Toyota Tacoma and 2004–2005 Toyota Tundra applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 13.540 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 22.750 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 9.210 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 13.540 in.\u003cbr\u003e\nExtended Length: 22.750 in.\u003cbr\u003e\nShock Stroke: 9.210 in.\u003cbr\u003e\nProp 65 Yes\/No: Yes\u003cbr\u003e\nProp 65 Short Label: California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov)\u003cbr\u003e\nAaiaid Part Number: BHNGB8548\u003cbr\u003e\nPart Number: B8548\u003cbr\u003e\nBrand Aaia: BHNG\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tacoma 2005\u003cbr\u003e\nToyota Tacoma 2006\u003cbr\u003e\nToyota Tacoma 2007\u003cbr\u003e\nToyota Tacoma 2008\u003cbr\u003e\nToyota Tacoma 2009\u003cbr\u003e\nToyota Tacoma 2010\u003cbr\u003e\nToyota Tacoma 2011\u003cbr\u003e\nToyota Tacoma 2012\u003cbr\u003e\nToyota Tacoma 2013\u003cbr\u003e\nToyota Tacoma 2014\u003cbr\u003e\nToyota Tacoma 2015\u003cbr\u003e\nToyota Tacoma 2016\u003cbr\u003e\nToyota Tacoma 2017\u003cbr\u003e\nToyota Tacoma 2018\u003cbr\u003e\nToyota Tundra 2000\u003cbr\u003e\nToyota Tundra 2001\u003cbr\u003e\nToyota Tundra 2002\u003cbr\u003e\nToyota Tundra 2003\u003cbr\u003e\nToyota Tundra 2004\u003cbr\u003e\nToyota Tundra 2005\u003cbr\u003e\nToyota Tundra 2006","brand":"Skyjacker","offers":[{"title":"Default Title","offer_id":67771942895725,"sku":"B8548","price":62.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/B8548.jpg?v=1792232503"},{"product_id":"fabtech-stealth-monotube-shock-absorber-fts6189-for-ford-f-250-f-350-and-toyota-tundra","title":"Fabtech Stealth Monotube Shock Absorber FTS6189 for Ford F-250, F-350 and Toyota Tundra","description":"\u003cp\u003eUpgrade suspension performance with the Fabtech Stealth Monotube Shock Absorber, part number FTS6189. Designed for select Ford F-250 Super Duty, Ford F-350 Super Duty, and Toyota Tundra applications, this shock delivers controlled damping and a comfortable ride, including vehicles equipped with oversized tires. Its all-black appearance, raised metal nameplate, and vehicle-specific valving provide a clean, purposeful look with dependable on-road and off-road performance.\u003cbr\u003eThe Stealth shock absorber uses a 46 mm high-flow piston housed in a seamless steel body for efficient oil movement and consistent damping. A monotube design helps manage heat during demanding driving conditions, while the vehicle-specific calibration supports improved handling and ride control. The nitrocarburized piston rod offers enhanced durability and corrosion resistance compared with conventional chromed rods, and its matte-black finish completes the blackout appearance.\u003cbr\u003eFeature: 46 mm high-flow piston supports responsive and consistent damping. Feature: Monotube construction helps dissipate heat during demanding use. Feature: Vehicle-specific valving is designed for a controlled ride with oversized tires. Feature: Nitrocarburized piston rod provides excellent durability and corrosion resistance. Feature: Matte-black finish and raised metal nameplate create a distinctive all-black shock package. Feature: Collapsed length is 17.97 inches, extended length is 28.28 inches, and shock stroke is 10.31 inches.\u003cbr\u003eThe Fabtech FTS6189 is engineered for select 2012 through 2015 Ford F-250 Super Duty, Ford F-350 Super Duty, and Toyota Tundra applications. Confirm vehicle fitment before installation. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e46 mm high-flow piston supports responsive and consistent damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMonotube construction helps dissipate heat during demanding use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific valving is designed for a controlled ride with oversized tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNitrocarburized piston rod provides excellent durability and corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMatte-black finish and raised metal nameplate create a distinctive all-black appearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length is 17.97 inches, extended length is 28.28 inches, and shock stroke is 10.31 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select Ford F-250 Super Duty, Ford F-350 Super Duty, and Toyota Tundra applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 17.97\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 28.28 in\u003cbr\u003e\nShock Stroke: 10.31 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS6189\u003cbr\u003e\nPart Number: FTS6189\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nDodge Ram 2500  2003\u003cbr\u003e\nDodge Ram 2500  2004\u003cbr\u003e\nDodge Ram 2500  2005\u003cbr\u003e\nDodge Ram 2500  2006\u003cbr\u003e\nDodge Ram 2500  2007\u003cbr\u003e\nDodge Ram 2500  2008\u003cbr\u003e\nDodge Ram 2500  2009\u003cbr\u003e\nDodge Ram 2500  2010\u003cbr\u003e\nDodge Ram 3500  2003\u003cbr\u003e\nDodge Ram 3500  2004\u003cbr\u003e\nDodge Ram 3500  2005\u003cbr\u003e\nDodge Ram 3500  2006\u003cbr\u003e\nDodge Ram 3500  2007\u003cbr\u003e\nDodge Ram 3500  2008\u003cbr\u003e\nDodge Ram 3500  2009\u003cbr\u003e\nDodge Ram 3500  2010\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-250 Super Duty  2009\u003cbr\u003e\nFord F-250 Super Duty  2010\u003cbr\u003e\nFord F-250 Super Duty  2011\u003cbr\u003e\nFord F-250 Super Duty  2012\u003cbr\u003e\nFord F-250 Super Duty  2013\u003cbr\u003e\nFord F-250 Super Duty  2014\u003cbr\u003e\nFord F-250 Super Duty  2015\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2009\u003cbr\u003e\nFord F-350 Super Duty  2010\u003cbr\u003e\nFord F-350 Super Duty  2011\u003cbr\u003e\nFord F-350 Super Duty  2012\u003cbr\u003e\nFord F-350 Super Duty  2013\u003cbr\u003e\nFord F-350 Super Duty  2014\u003cbr\u003e\nFord F-350 Super Duty  2015\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771989262445,"sku":"FTS6189","price":100.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS6189-1-beauty.jpg?v=1792233074"},{"product_id":"fabtech-stealth-monotube-shock-absorber-fts6188-for-2012-2014-ford-f-250-and-f-350-super-duty","title":"Fabtech Stealth Monotube Shock Absorber FTS6188 for 2005-2027 Ford F-250 and F-350 Super Duty","description":"\u003cp\u003eUpgrade the suspension performance of your 2012–2014 Ford F-250 or F-350 Super Duty with the Fabtech Stealth Monotube Shock Absorber, part number FTS6188. Designed for a controlled, comfortable ride, this shock features vehicle-specific valving and a high-flow 46 mm piston to help manage suspension movement, particularly on trucks equipped with oversized tires. Its monotube design supports consistent damping performance during everyday driving, towing, hauling, and off-road use.\u003cbr\u003eThe Fabtech Stealth shock absorber uses a seamless steel body and a durable Nitrocarburized piston rod. Compared with conventional chromed rods, Nitrocarburized steel provides improved resistance to wear and corrosion. The piston rod is finished in matte black, while the shock body features an all-black appearance and a raised metal Stealth nameplate for a clean, distinctive installation. This blacked-out design complements a wide range of truck builds without sacrificing functional durability.\u003cbr\u003eWith a 9.81-inch shock stroke, the FTS6188 provides suspension control across a broad range of movement. The extended length is 27.15 inches, and the collapsed length is 17.34 inches. This Fabtech monotube shock absorber is engineered for direct application on select 2012, 2013, and 2014 Ford F-250 Super Duty and Ford F-350 Super Duty trucks. Professional installation is recommended to ensure proper fitment and suspension operation. This product includes a California Proposition 65 warning regarding cancer and reproductive harm; visit www.P65Warnings.ca.gov for more information.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMonotube shock absorber with vehicle-specific valving for improved ride control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh-flow 46 mm piston helps deliver consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNitrocarburized piston rod offers enhanced durability and corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMatte-black piston rod and all-black shock design provide a clean stealth appearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeamless steel shock body is engineered for dependable suspension service\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e9.81-inch shock stroke supports a broad range of suspension movement\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended length: 27.15 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed length: 17.34 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits select 2012–2014 Ford F-250 Super Duty and Ford F-350 Super Duty models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 17.34\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 27.15 in\u003cbr\u003e\nShock Stroke: 9.81 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS6188\u003cbr\u003e\nPart Number: FTS6188\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nFord F-250 Super Duty  2005\u003cbr\u003e\nFord F-250 Super Duty  2006\u003cbr\u003e\nFord F-250 Super Duty  2007\u003cbr\u003e\nFord F-250 Super Duty  2008\u003cbr\u003e\nFord F-250 Super Duty  2009\u003cbr\u003e\nFord F-250 Super Duty  2010\u003cbr\u003e\nFord F-250 Super Duty  2011\u003cbr\u003e\nFord F-250 Super Duty  2012\u003cbr\u003e\nFord F-250 Super Duty  2013\u003cbr\u003e\nFord F-250 Super Duty  2014\u003cbr\u003e\nFord F-250 Super Duty  2015\u003cbr\u003e\nFord F-250 Super Duty  2017\u003cbr\u003e\nFord F-250 Super Duty  2018\u003cbr\u003e\nFord F-250 Super Duty  2019\u003cbr\u003e\nFord F-250 Super Duty  2020\u003cbr\u003e\nFord F-250 Super Duty  2023\u003cbr\u003e\nFord F-250 Super Duty  2024\u003cbr\u003e\nFord F-250 Super Duty  2025\u003cbr\u003e\nFord F-250 Super Duty  2026\u003cbr\u003e\nFord F-350 Super Duty  2005\u003cbr\u003e\nFord F-350 Super Duty  2006\u003cbr\u003e\nFord F-350 Super Duty  2007\u003cbr\u003e\nFord F-350 Super Duty  2008\u003cbr\u003e\nFord F-350 Super Duty  2009\u003cbr\u003e\nFord F-350 Super Duty  2010\u003cbr\u003e\nFord F-350 Super Duty  2011\u003cbr\u003e\nFord F-350 Super Duty  2012\u003cbr\u003e\nFord F-350 Super Duty  2013\u003cbr\u003e\nFord F-350 Super Duty  2014\u003cbr\u003e\nFord F-350 Super Duty  2015\u003cbr\u003e\nFord F-350 Super Duty  2017\u003cbr\u003e\nFord F-350 Super Duty  2018\u003cbr\u003e\nFord F-350 Super Duty  2019\u003cbr\u003e\nFord F-350 Super Duty  2020\u003cbr\u003e\nFord F-350 Super Duty  2023\u003cbr\u003e\nFord F-350 Super Duty  2024\u003cbr\u003e\nFord F-350 Super Duty  2025\u003cbr\u003e\nFord F-350 Super Duty  2026\u003cbr\u003e\nToyota Tundra  2020\u003cbr\u003e\nToyota Tundra  2021\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771990769773,"sku":"FTS6188","price":100.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS6188_UNMOUNTED.jpg?v=1792233093"},{"product_id":"fabtech-stealth-monotube-shock-absorber-fts6021","title":"Fabtech Stealth Monotube Shock Absorber FTS6021","description":"\u003cp\u003eUpgrade your vehicle’s suspension with the Fabtech Stealth Monotube Shock Absorber, part number FTS6021. Designed to deliver a controlled, comfortable ride, this shock absorber uses vehicle-specific valving and a high-flow 46 mm piston to help manage suspension movement, even when running oversized tires. Its monotube construction provides consistent damping performance during demanding street and off-road driving conditions.\u003cbr\u003eThe Fabtech Stealth shock absorber features a seamless steel body and a nitrocarburized piston rod engineered for improved durability and corrosion resistance compared with conventional chromed rods. The piston rod is finished in matte black, while the shock body and raised metal nameplate create a complete black-out appearance that complements modern suspension builds. This combination of performance-focused design and distinctive styling makes the Stealth series a practical upgrade for drivers seeking dependable ride quality.\u003cbr\u003eWith a compressed length of 15.96 inches, an extended length of 24.79 inches, and 8.85 inches of shock travel, the Fabtech FTS6021 is designed for specific vehicle applications. It fits select 1994-1995 Dodge Ram 1500, 2004-2006 Toyota Tundra, 2004-2005 Ford F-150 Heritage, and 2012-2015 Jeep Wrangler models. Confirm vehicle application and suspension configuration before installation. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMonotube design: Provides consistent damping and controlled suspension performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHigh-flow piston: Uses a 46 mm piston to support responsive ride control with oversized tires.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific valving: Tuned for application-specific ride quality and handling.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNitrocarburized piston rod: Offers enhanced durability and corrosion resistance compared with chromed rods.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMatte black finish: Completes the blackout appearance and complements custom suspension systems.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeamless steel body: Delivers a strong, durable housing for demanding driving conditions.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock travel: Provides 8.85 inches of suspension movement.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle compatibility: Fits select Dodge Ram 1500, Toyota Tundra, Ford F-150 Heritage, and Jeep Wrangler applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 15.96\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 24.79 in\u003cbr\u003e\nShock Stroke: 8.85 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS6021\u003cbr\u003e\nPart Number: FTS6021\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nDodge Ram 1500  1994\u003cbr\u003e\nDodge Ram 1500  1995\u003cbr\u003e\nDodge Ram 1500  1996\u003cbr\u003e\nDodge Ram 1500  1997\u003cbr\u003e\nDodge Ram 1500  1998\u003cbr\u003e\nDodge Ram 1500  1999\u003cbr\u003e\nDodge Ram 1500  2000\u003cbr\u003e\nDodge Ram 1500  2001\u003cbr\u003e\nFord F-150  1997\u003cbr\u003e\nFord F-150  1998\u003cbr\u003e\nFord F-150  1999\u003cbr\u003e\nFord F-150  2000\u003cbr\u003e\nFord F-150  2001\u003cbr\u003e\nFord F-150  2002\u003cbr\u003e\nFord F-150  2003\u003cbr\u003e\nFord F-150 Heritage  2004\u003cbr\u003e\nFord F-250  1997\u003cbr\u003e\nFord F-250  1998\u003cbr\u003e\nFord F-250  1999\u003cbr\u003e\nJeep Wrangler  2010\u003cbr\u003e\nJeep Wrangler  2011\u003cbr\u003e\nJeep Wrangler  2012\u003cbr\u003e\nJeep Wrangler  2013\u003cbr\u003e\nJeep Wrangler  2014\u003cbr\u003e\nJeep Wrangler  2015\u003cbr\u003e\nToyota Tundra  2000\u003cbr\u003e\nToyota Tundra  2001\u003cbr\u003e\nToyota Tundra  2002\u003cbr\u003e\nToyota Tundra  2003\u003cbr\u003e\nToyota Tundra  2004\u003cbr\u003e\nToyota Tundra  2005\u003cbr\u003e\nToyota Tundra  2006","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67771999846509,"sku":"FTS6021","price":100.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS6021-beauty.jpg?v=1792233192"},{"product_id":"fabtech-stealth-monotube-shock-absorber-fts6016","title":"Fabtech Stealth Monotube Shock Absorber FTS6016","description":"\u003cp\u003eUpgrade your suspension with the Fabtech Stealth Monotube Shock Absorber, part number FTS6016. Designed for drivers who demand dependable performance and a controlled ride, this all-black monotube shock features a raised metal Stealth nameplate that reflects Fabtech’s commitment to quality. Vehicle-specific valving helps provide balanced damping for lifted applications and vehicles equipped with oversized tires.\u003cbr\u003eThe Fabtech FTS6016 uses a 46 mm high-flow piston inside a seamless steel body to promote consistent shock performance under demanding driving conditions. Its Nitrocarburized piston rod offers improved durability and corrosion resistance compared with conventional chromed rods. The matte-black finish completes the blackout appearance and coordinates with modern custom suspension builds.\u003cbr\u003eThis shock absorber is designed for compatible 2012–2015 Jeep Wrangler applications and 2012–2018 Toyota Tundra applications. It provides a 10.3-inch shock stroke, with a collapsed length of 16.67 inches and an extended length of 26.97 inches. Confirm vehicle fitment and suspension configuration before ordering. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS6016\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Stealth all-black monotube shock absorber with a raised metal nameplate\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston: 46 mm high-flow piston for consistent damping performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eValving: Vehicle-specific valving engineered for a controlled ride with oversized tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Rod: Nitrocarburized matte-black piston rod for enhanced durability and corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBody: Seamless steel shock body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: 10.3 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCollapsed Length: 16.67 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended Length: 26.97 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Compatible with select 2012–2015 Jeep Wrangler and 2012–2018 Toyota Tundra applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety Notice: California Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nCollapsed Length: 16.67\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nExtended Length: 26.97 in\u003cbr\u003e\nShock Stroke: 10.3 in\u003cbr\u003e\nAaiaid Part Number: BKBNFTS6016\u003cbr\u003e\nPart Number: FTS6016\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nJeep Wrangler  2007\u003cbr\u003e\nJeep Wrangler  2008\u003cbr\u003e\nJeep Wrangler  2009\u003cbr\u003e\nJeep Wrangler  2010\u003cbr\u003e\nJeep Wrangler  2011\u003cbr\u003e\nJeep Wrangler  2012\u003cbr\u003e\nJeep Wrangler  2013\u003cbr\u003e\nJeep Wrangler  2014\u003cbr\u003e\nJeep Wrangler  2015\u003cbr\u003e\nRam 1500  2019\u003cbr\u003e\nRam 1500  2020\u003cbr\u003e\nRam 1500  2021\u003cbr\u003e\nToyota Tundra  2007\u003cbr\u003e\nToyota Tundra  2008\u003cbr\u003e\nToyota Tundra  2009\u003cbr\u003e\nToyota Tundra  2010\u003cbr\u003e\nToyota Tundra  2011\u003cbr\u003e\nToyota Tundra  2012\u003cbr\u003e\nToyota Tundra  2013\u003cbr\u003e\nToyota Tundra  2014\u003cbr\u003e\nToyota Tundra  2016\u003cbr\u003e\nToyota Tundra  2017\u003cbr\u003e\nToyota Tundra  2018\u003cbr\u003e\nToyota Tundra  2019\u003cbr\u003e\nToyota Tundra  2020","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772002009197,"sku":"FTS6016","price":100.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FTS6016-beauty.jpg?v=1792233230"},{"product_id":"fabtech-dirt-logic-2-5-resi-coilover-shock-absorber-fts26109-for-2022-2026-toyota-tundra","title":"Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber FTS26109 for 2022-2026 Toyota Tundra","description":"Dirt Logic 2.5 Resi Coil Over Shock Absorber\n\u003cp\u003eUpgrade your 2022-2026 Toyota Tundra with the Fabtech Dirt Logic 2.5 Resi Coilover Shock Absorber, part number FTS26109. Derived from Fabtech’s desert racing development program, this high-performance shock is engineered for demanding off-road use and a variety of coilover applications. Its reservoir-equipped design provides increased damping capacity to help control suspension movement during aggressive driving over rough terrain.\u003cbr\u003eThe Dirt Logic 2.5 combines durable construction with performance-focused tuning for drivers who expect dependable handling, improved suspension control, and consistent operation in challenging conditions. It is designed around OEM shock stroke specifications and works with the vehicle’s coilover suspension configuration. The included high-quality coil spring helps support the complete performance-oriented assembly and provides a reliable foundation for off-road suspension upgrades.\u003cbr\u003eDesigned for direct application to select Toyota Tundra models, this Fabtech coilover shock is a practical choice for trail driving, desert use, and other off-road applications where enhanced damping performance is important. Verify vehicle configuration and installation requirements before purchase. Professional installation is recommended to ensure proper fitment, preload adjustment, and suspension operation. This product carries a California Proposition 65 warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePerformance-focused Dirt Logic 2.5 resi coilover shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for aggressive off-road driving and demanding terrain\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDerived from Fabtech desert racing development\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReservoir-equipped design for increased damping capacity\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes a high-quality coil spring\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOEM shock stroke specification\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech part number FTS26109\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nShock Stroke: OEM\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26109\u003cbr\u003e\nPart Number: FTS26109\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772054503533,"sku":"FTS26109","price":1993.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/COILOVER_SIDE.jpg?v=1792234519"},{"product_id":"fabtech-dirt-logic-2-5-coilover-shock-absorber-fts26108-for-2022-2026-toyota-tundra","title":"Fabtech Dirt Logic 2.5 Coilover Shock Absorber FTS26108 for 2022-2026 Toyota Tundra","description":"Dirt Logic 2.5 Coil Over Shock Absorber\n\u003cp\u003eUpgrade the suspension performance of your Toyota Tundra with the Fabtech Dirt Logic 2.5 Coilover Shock Absorber, part number FTS26108. Developed from Fabtech’s desert racing experience, this high-performance coilover is engineered to deliver excellent damping capacity for aggressive off-road driving and demanding trail use. Its coilover design provides controlled suspension movement while helping the truck maintain stability over rough terrain, whoops, rocks, and uneven surfaces.\u003cbr\u003eThe Dirt Logic 2.5 is designed for a variety of coilover applications and uses highest-quality coil springs to support reliable off-road performance. The OEM shock stroke helps maintain compatibility with the original suspension travel requirements while providing enhanced damping control. This Fabtech shock absorber is built for drivers who need durable suspension performance during recreational off-roading, desert driving, and other challenging conditions.\u003cbr\u003eThe Fabtech Dirt Logic 2.5 Coilover Shock Absorber FTS26108 fits 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models. Professional installation is recommended to ensure proper fitment, spring setup, and suspension alignment. Verify vehicle application before ordering. This product includes a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePerformance-focused Dirt Logic 2.5 coilover shock absorber\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDeveloped from Fabtech desert racing experience\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProvides increased damping capacity for aggressive off-road driving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUses highest-quality coil springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOEM shock stroke for application-specific suspension compatibility\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech part number FTS26108\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nShock Stroke: OEM\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26108\u003cbr\u003e\nPart Number: FTS26108\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772057124973,"sku":"FTS26108","price":1563.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/FRONT_END_TUNDRA.jpg?v=1792234536"},{"product_id":"fabtech-fts26107-shock-spacer-kit-for-2022-2026-toyota-tundra","title":"Fabtech FTS26107 Shock Spacer Kit for 2022-2026 Toyota Tundra","description":"\u003cp\u003eUpgrade the suspension setup of your 2022-2026 Toyota Tundra with the Fabtech FTS26107 Shock Spacer Kit. Designed to support proper shock positioning and suspension functionality, this kit reflects Fabtech’s extensive experience in aftermarket suspension engineering. It is a practical solution for enthusiasts and installers seeking dependable fitment and consistent performance from a properly configured suspension system.\u003cbr\u003eFabtech develops its suspension components using advanced design software, fabrication equipment, experienced engineers, and skilled fabricators. The FTS26107 Shock Spacer Kit benefits from the company’s focus on precise design, thorough research, and rigorous testing. These development standards help deliver reliable functionality for demanding off-road applications while maintaining the quality expected from Fabtech suspension products.\u003cbr\u003eThe Fabtech FTS26107 is engineered for compatible 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models. Verify vehicle configuration and suspension compatibility before installation. Professional installation is recommended to ensure correct fitment, assembly, and suspension operation. This product contains a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26107\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Shock spacer kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2022-2026 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuspension Design: Developed using advanced engineering, fabrication, and testing processes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Supports proper shock positioning and dependable suspension functionality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Professional installation is recommended\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26107\u003cbr\u003e\nPart Number: FTS26107\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772059648109,"sku":"FTS26107","price":570.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/STEP_TUNDRA.jpg?v=1792234546"},{"product_id":"fabtech-fts26106-shock-spacer-kit-for-2022-2026-toyota-tundra","title":"Fabtech FTS26106 Shock Spacer Kit for 2022-2026 Toyota Tundra","description":"\u003cp\u003eThe Fabtech FTS26106 Shock Spacer Kit is designed for 2022-2026 Toyota Tundra applications requiring dependable suspension component fitment and performance. This kit supports coilover suspension setups and is engineered to help maintain proper shock positioning during installation. Fabtech combines more than 20 years of aftermarket suspension development with advanced design software, precision fabrication equipment, and experienced engineers and fabricators to create suspension products for demanding off-road use.\u003cbr\u003eFabtech shock spacer components are developed with a focus on reliable function, consistent fitment, and long-term durability. Extensive research, computer-aided design, fabrication, and rigorous testing help ensure the FTS26106 delivers the quality expected from a purpose-built suspension component. Its application-specific design makes it a practical choice for Tundra owners, installers, and off-road enthusiasts seeking a professional suspension solution from an established aftermarket brand.\u003cbr\u003eThe Fabtech FTS26106 Shock Spacer Kit is compatible with 2022, 2023, 2024, 2025, and 2026 Toyota Tundra models. Verify the vehicle configuration and suspension application before installation to ensure compatibility. Professional installation is recommended for suspension components, and all installation procedures should follow the vehicle and kit manufacturer’s instructions. This product carries a California Proposition 65 warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication-specific shock spacer kit for select 2022-2026 Toyota Tundra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for coilover suspension applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabtech part number FTS26106\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngineered using advanced suspension design and fabrication processes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTested for dependable performance and functionality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBacked by Fabtech’s extensive aftermarket suspension development experience\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26106\u003cbr\u003e\nPart Number: FTS26106\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2022\u003cbr\u003e\nToyota Tundra  2023\u003cbr\u003e\nToyota Tundra  2024\u003cbr\u003e\nToyota Tundra  2025\u003cbr\u003e\nToyota Tundra  2026","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772062204013,"sku":"FTS26106","price":713.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/COIL_20SPACER_20TUNDRA.jpg?v=1792234565"},{"product_id":"fabtech-dirt-logic-2-5-stainless-steel-coilover-shock-absorber-fts26058-for-toyota-tundra","title":"Fabtech Dirt Logic 2.5 Stainless Steel Coilover Shock Absorber FTS26058 for Toyota Tundra","description":"\u003cp\u003eUpgrade the suspension performance of your lifted Toyota Tundra with the Fabtech Dirt Logic 2.5 Stainless Steel Coilover Shock Absorber, part number FTS26058. Designed for demanding off-road use, this coilover combines durable construction, consistent damping, and corrosion resistance to deliver a controlled ride on the street and trail. It is engineered for the listed 2000–2006 Toyota Tundra applications and uses an OEM shock stroke for straightforward integration with compatible suspension systems.\u003cbr\u003eThe high-grade 304 stainless steel shock body provides excellent resistance to corrosion while adding a refined machined appearance. A NitroSteel piston rod offers increased hardness and corrosion resistance compared with conventional chrome-plated rods, helping support long-term reliability in harsh environments. Fabtech Dirt Logic 2.5 coilover shocks use high-quality coil springs designed to go solid without breaking, settling, or bowing, supporting dependable performance under demanding suspension loads.\u003cbr\u003eEach Fabtech Dirt Logic coilover is preset with the proper preload for installation without additional adjustment, helping simplify setup when paired with the correct application-specific suspension components. Spherical bearings at each end increase mounting strength, while urethane misalignment cups in the top caps help reduce the road noise commonly associated with spherical bearings. This shock absorber is intended for lifted trucks and provides the durable, performance-focused construction expected from the Dirt Logic series.\u003cbr\u003eThis Fabtech FTS26058 coilover shock absorber is designed for Toyota Tundra models from 2000 through 2006. Verify vehicle configuration, suspension lift requirements, and mounting compatibility before installation. Professional installation is recommended. California Proposition 65 Warning: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: Fabtech\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: FTS26058\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: 2000–2006 Toyota Tundra\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUsage: Lifted trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock Stroke: OEM\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: High-grade 304 stainless steel shock body\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiston Rod: NitroSteel material for increased hardness and corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCoil Spring: High-quality spring designed to resist breaking, settling, and bowing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMounting: Spherical bearings at each end for increased strength\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNoise Reduction: Urethane misalignment cups in the top caps help reduce road noise\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Preset preload allows installation without additional adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWarning: California Proposition 65—Cancer and Reproductive Harm; www.P65Warnings.ca.gov\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nLtl Freight Required: f\u003cbr\u003e\nShock Stroke: OEM\u003cbr\u003e\nUsage: Lifted Trucks\u003cbr\u003e\nWarning Ca Proposition 65: Yes\u003cbr\u003e\nWarning Ca Proposition 65 Message: WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003cbr\u003e\nAaiaid Part Number: BKBNFTS26058\u003cbr\u003e\nPart Number: FTS26058\u003cbr\u003e\nBrand Aaia: BKBN\u003cbr\u003e\nFits\u003cbr\u003e\nToyota Tundra  2000\u003cbr\u003e\nToyota Tundra  2001\u003cbr\u003e\nToyota Tundra  2002\u003cbr\u003e\nToyota Tundra  2003\u003cbr\u003e\nToyota Tundra  2004\u003cbr\u003e\nToyota Tundra  2005\u003cbr\u003e\nToyota Tundra  2006","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":67772099231853,"sku":"FTS26058","price":1451.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/fts26058.jpg?v=1792234895"},{"product_id":"readylift-3-sst2-1-suspension-system-with-falcon-2-1-struts-shocks-toyota-tundra-2022-2026-62-52420","title":"ReadyLift 3\" SST2.1 Suspension System With Falcon 2.1 Struts\/Shocks - Toyota Tundra 2022-2026 62-52420","description":"\u003cp\u003e\u003cstrong\u003e3\" SST2.1 Suspension System With Falcon 2.1 Struts\/Shocks - Toyota Tundra 2022-2026\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnleash the Next Level in Lifted Performance with ReadyLIFT’s All-New 3” SST2.1 Suspension System for 2022+ Toyota Tundra! ReadyLIFT is proud to introduce the 62-52420 3” SST2.1 Suspension System, engineered to elevate your 2022+ Toyota Tundra’s performance, style, and capabilities to unprecedented levels. This cutting-edge suspension kit redefines what’s possible for a lifted Tundra, delivering a bold stance, superior handling, and the rugged durability ReadyLIFT is known for. At the heart of this system are Falcon 2.1 Series front replacement struts and rear shocks, designed to transform your Tundra into the ultimate street and trail performer. With enhanced ride quality, improved handling, and the ability to fit up to 35x12.50 tires, this premium lift not only looks aggressive, but it’s also built to conquer any terrain.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReady to elevate Tundra’s to a whole new level? The all-new ReadyLIFT 62-52420 3\" SST2.1 Suspension System is here to redefine what’s possible.\u003c\/li\u003e\n\u003cli\u003eDesigned for 2022-2026 Toyota Tundra’s, this premium lift kit delivers an aggressive stance without sacrificing the factory ride quality you rely on.\u003c\/li\u003e\n\u003cli\u003e• Falcon 2.1 Series Suspension System – A ride quality upgrade you can feel every mile.\u003c\/li\u003e\n\u003cli\u003e• HD Full-Coverage Front Skid Plate – Protects your differential and engine without compromising service access.\u003c\/li\u003e\n\u003cli\u003e• 1.5\" Upper Control Arms – Corrected ball joint angles for maximum articulation.\u003c\/li\u003e\n\u003cli\u003e• High-Angle CV Axles – Engineered for maximum suspension travel, reduced vibration, and superior durability.\u003c\/li\u003e\n\u003cli\u003e• Custom Steering Stops – Ensures the integrity of your CV axle under all suspension cycles.\u003c\/li\u003e\n\u003cli\u003e• Fit up to 35x12.50 tires with 18\"x9\" wheels and +12mm offset.\u003c\/li\u003e\n\u003cli\u003eNote: This kit is not compatible with Tundra’s equipped with air ride, TRD Pro, or AVS systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: ReadyLift\u003c\/li\u003e\n\u003cli\u003ePart Number: 62-52420\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFront Lift Component: Coilover\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 3\u003c\/li\u003e\n\u003cli\u003eFront or Rear: Front and Rear\u003c\/li\u003e\n\u003cli\u003eFront Shocks: Falcon 2.1\u003c\/li\u003e\n\u003cli\u003eInstall Difficulty: Difficult Requires Professional Installation\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 5+ Hours\u003c\/li\u003e\n\u003cli\u003eMax Tire Size: 35\u003c\/li\u003e\n\u003cli\u003eRear Lift Component: Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 2\u003c\/li\u003e\n\u003cli\u003eRear Shocks: Falcon 2.1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"ReadyLift","offers":[{"title":"Default Title","offer_id":67903163433069,"sku":"6252420","price":3419.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/62-52420-png.webp?v=1793333652"},{"product_id":"maxtrac-vulcan-ifp-26-5-stem-to-loop-shock-1-pc-2650slv-4-for-select-ford-ram-toyota-vehicles","title":"MaxTrac Vulcan Ifp 26.5\" Stem-To-Loop Shock - (1 Pc) 2650SLV-4 for Select Ford, Ram \u0026 Toyota Vehicles","description":"\u003cp\u003e\u003cstrong\u003eMax Trac Suspension's Part# 2650SLV-4 Is A Single Stem-To-Loop Rear Shock: Mono Tube, Aluminum Body\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: MaxTrac\u003c\/li\u003e\n\u003cli\u003ePart Number: 2650SLV-4\u003c\/li\u003e\n\u003cli\u003eColor: SILVER\u003c\/li\u003e\n\u003cli\u003eFinish: BRUSHED SILVER\u003c\/li\u003e\n\u003cli\u003eMaterial: ALUMINUM\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003c\/p\u003e","brand":"MaxTrac","offers":[{"title":"Default Title","offer_id":67948905201773,"sku":"2650SLV4","price":179.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/96fbc2284589a.png?v=1793860228"},{"product_id":"maxtrac-8-front-lift-height-4-rear-lift-height-vulcan-reservoir-shock-1-pc-2900slvr-4-for-select-ford-toyota-vehicles","title":"MaxTrac 8\" Front Lift Height, 4\" Rear Lift Height - Vulcan Reservoir Shock (1 Pc) 2900SLVR-4 for Select Ford \u0026 Toyota Vehicles","description":"\u003cp\u003e\u003cstrong\u003eMax Trac Suspension's Part# 2900SLVR-4 Is A Single Stem-To-Loop Rear Shock: Mono Tube, Aluminum Body W\/ Remote Reservoir\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: MaxTrac\u003c\/li\u003e\n\u003cli\u003ePart Number: 2900SLVR-4\u003c\/li\u003e\n\u003cli\u003eColor: SILVER\u003c\/li\u003e\n\u003cli\u003eFinish: BRUSHED SILVER\u003c\/li\u003e\n\u003cli\u003eMaterial: ALUMINUM\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003c\/p\u003e","brand":"MaxTrac","offers":[{"title":"Default Title","offer_id":67948905398381,"sku":"2900SLVR4","price":329.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/0d5bc8e0076b6.png?v=1793860229"},{"product_id":"maxtrac-4-rear-lift-box-kit-w-fox-shocks-906740f-for-2007-2021-toyota-tundra","title":"MaxTrac 4\" Rear Lift Box Kit W\/ Fox Shocks 906740F for 2007-2021 Toyota Tundra","description":"\u003cp\u003e\u003cstrong\u003eMax Trac Suspension's Part# 906740F Is A Box Kit Including 4\" Lift Blocks, U-Bolts, Carrier Bearing Spacer \u0026amp; A Pair Of Fox 2.0 Performance Series Rear Shocks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: MaxTrac\u003c\/li\u003e\n\u003cli\u003ePart Number: 906740F\u003c\/li\u003e\n\u003cli\u003eColor: GREY\u003c\/li\u003e\n\u003cli\u003eFinish: GREY POWDERCOAT\u003c\/li\u003e\n\u003cli\u003eMaterial: STEEL\u003c\/li\u003e\n\u003cli\u003eShock Details: R: 776728F (X2)\u003c\/li\u003e\n\u003cli\u003eLift Rear (Inches): 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov\u003c\/p\u003e","brand":"MaxTrac","offers":[{"title":"Default Title","offer_id":67948927385709,"sku":"906740F","price":773.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8458\/2509\/files\/8756196a8963f.jpg?v=1793860121"}],"url":"https:\/\/truckarmy.com\/collections\/toyota-tundra-shocks.oembed?page=2","provider":"Truck Army","version":"1.0","type":"link"}