BRExhaust direct-fit replacement exhaust system kit 106-0511 for 2011-2014 Ford F-150

Quick answer: A direct-fit replacement exhaust kit swaps a rusted or broken factory exhaust for new pipes and a muffler that bolt into the original hangers, with the clamps and gaskets in the box and no cutting, bending or welding. BRExhaust makes three kinds: system kits (106-) that replace everything from behind or near the last catalytic converter back, front pipe kits (107-) in stainless steel, and muffler kits (108-). None of them includes a catalytic converter. Match the kit to your year and engine, then check the OE interchange numbers on the listing against the parts on your truck.

Exhaust parts rust from the inside out on trucks, Jeeps and SUVs that see short trips, road salt and creek crossings. When the muffler or tailpipe finally breaks, most owners want the factory sound and fit back, not a louder performance system. That's what a direct-fit replacement kit is for. This guide covers the truck, Jeep, SUV and van kits we carry from BRExhaust, using only what each listing states.

What a BRExhaust direct-fit kit is

  • Bolt-on, multi-piece: the listings say the pieces bolt on around obstructions and no bending or welding is needed.
  • Mandrel-bent pipe: listed on the system kits (BRExhaust compares this to crush-bent pipe).
  • Material: system and muffler kits are listed as aluminized steel; front pipe kits are listed as stainless steel.
  • Emissions: the listings say the kits leave all emissions equipment in place. System kit specs say "Catalytic Converter Included: No."
  • In the box: components, gaskets, clamps, hardware and installation instructions, packed together. Each listing names the exact clamps and gaskets.

System kit vs front pipe kit vs muffler kit

Kit Part numbers start with What it replaces Pick it when
Direct-fit exhaust system kit 106- Everything from behind or near the last catalytic converter back (pipes and muffler) Several sections are rusted, or the muffler and tailpipe are both bad
Direct-fit front pipe kit 107- The front pipe section, made to replace the factory part Only the front pipe is cracked or leaking (the Wrangler 3.6L, Grand Cherokee 3.6L and Frontier 3.3L kits below; the 107-0386 specs say "O2 Sensor Port: No")
Direct-fit muffler kit 108- The rear muffler The pipes are solid and only the muffler is gone

If the catalytic converter itself has failed, that's a separate part. See catalytic converter grades: CARB vs EPA before you buy one.

Pickup trucks

Vehicle (from the listing title) Part Kit type and listed hardware
1995–1998 Toyota T100 3.4L BRExhaust 106-0147 System kit; ring gasket, bolts, nuts, (3) 2.25 in. U-bolt clamps
1999–2000 Nissan Frontier 3.3L / 2000 Xterra 3.3L BRExhaust 107-0035 Front pipe kit (stainless steel); 3-bolt and 2-bolt gaskets, bolts, nuts
2007–2018 Nissan Frontier 4.0L / 2009–2012 Suzuki Equator 4.0L BRExhaust 106-0144 System kit; (2) 2-bolt gaskets, U-bolt clamps, nuts, bolts
2005–2012 Toyota Tacoma 2.7L BRExhaust 106-0226 System kit; ring gasket, U-bolt clamp + clamp hanger, bolts, nuts
2005–2012 Toyota Tacoma 4.0L BRExhaust 106-0171 System kit; donut gasket, spring bolt kit, (3) 2.5 in. U-bolt clamps
2009–2021 Toyota Tundra 5.7L / 2010–2019 Tundra 4.6L BRExhaust 106-0237 System kit; (3) ring gaskets, 3 in. ball flare clamp, U-bolt clamps, bolts, nuts
2004–2008 Ford F-150 / 2006–2008 Lincoln Mark LT BRExhaust 106-0697 System kit; (5) 2.5 in. U-bolt clamps
2011–2014 Ford F-150 BRExhaust 106-0511 System kit; (4) 3.125 in. U-bolt clamps, washers, nuts, bolts
2011–2014 Ford F-150 BRExhaust 106-0808 System kit; (3) 3 in. U-bolt clamps
1999–2004 Ford F-250 / F-350 Super Duty BRExhaust 106-0007 System kit; (5) 3.125 in. U-bolt clamps
2001–2006 Silverado / Sierra 2500HD and 3500; 2007 Classic BRExhaust 106-0661 System kit; (4) 4 in. band clamps, (2) 4 in. U-bolt clamp hangers

Two kits for the 2011–2014 F-150? Both listings fit 2011–2014 F-150s, but they replace different factory parts. BRExhaust 106-0511 interchanges with OE parts BL3Z-5230-B, BL3Z-5230-F, BL3Z-5A212-D, BL3Z-5A212-E, BL3Z-5A212-F, BL3Z-5A212-G, BL3Z-5A212-J and EL3Z-5230-A. BRExhaust 106-0808 interchanges with BL3Z-5230-E. Match the OE number on your truck's exhaust before ordering. More F-150 options are on the F-150 exhaust systems page.

Jeeps

Vehicle (from the listing title) Part Kit type and listed hardware
1997–2006 Jeep Wrangler (TJ) BRExhaust 106-0002 System kit; (2) 2.25 in. U-bolt clamps
2007–2011 Jeep Wrangler 3.8L (JK) BRExhaust 106-0045 System kit; (4) 2.5 in. U-bolt clamps
2012–2017 Jeep Wrangler 3.6L / 2018 Wrangler JK 3.6L BRExhaust 107-0386 Front pipe kit (stainless steel); 2.5 in. and 2 in. band clamps, (2) spring bolt kits
1996–2001 Jeep Cherokee 4.0L / 1996–1999 Cherokee 2.5L BRExhaust 106-0003 System kit; (3) 2.25 in. U-bolt clamps
1999–2004 Jeep Grand Cherokee 4.0L / 4.7L BRExhaust 106-0018 System kit; U-bolt clamps
2005–2010 Jeep Grand Cherokee / 2006–2010 Commander BRExhaust 106-0014 System kit; (3) 2.5 in. U-bolt clamps, nuts
2011–2017 Jeep Grand Cherokee 3.6L / Dodge Durango 3.6L BRExhaust 107-0282 Front pipe kit (stainless steel); band clamp, ball flare clamp
2008–2012 Jeep Liberty 3.7L / 2007–2011 Dodge Nitro 3.7L BRExhaust 106-0047 System kit

SUVs

Vehicle (from the listing title) Part Kit type and listed hardware
1999–2002 Toyota 4Runner 3.4L / 1999–2000 4Runner 2.7L BRExhaust 106-0022 System kit; ring gaskets, bolts, nuts, U-bolt clamp
2003–2009 Toyota 4Runner / 2003–2004 Lexus GX470 BRExhaust 106-0075 System kit; ring gasket, donut gasket, spring bolt kit, clamps
2005–2009 Toyota 4Runner / 2010–2017 Lexus GX460 / 2005–2007 GX470 BRExhaust 106-0076 System kit; donut gasket, ring gasket, spring bolt kit, clamps
2005–2014 Nissan Xterra 4.0L BRExhaust 106-0065 System kit; (2) 2-bolt gaskets, U-bolt clamps, nuts, bolts
2001–2006 Tahoe, 2000–2006 Suburban 1500, 2002–2006 Avalanche 1500, Yukon / Yukon XL 1500, 2002–2005 Escalade BRExhaust 106-0011 System kit; U-bolt clamps, clamp hanger, nuts, bolts
2002–2005 Ford Explorer / Mercury Mountaineer BRExhaust 106-0033 System kit
2011–2015 Ford Explorer 3.5L BRExhaust 106-0459 System kit
2016–2017 Ford Explorer 3.5L BRExhaust 106-0957 System kit
2011–2025 / 2014–2025 Dodge Durango 3.6L BRExhaust 108-0265 Muffler kit (also see 108-0170)

Work vans

Vehicle (from the listing title) Part Kit type and listed hardware
2014–2025 Ram ProMaster 1500 / 2500 / 3500 (3500 years as listed) BRExhaust 106-1140 System kit
2014–2025 Ram ProMaster 1500 / 2500 / 3500 (3500 years as listed) BRExhaust 108-0313 Rear muffler kit; 2.5 in. band clamp; muffler 3.5 x 3.5 x 10 in.
2012–2017 Nissan NV1500 / NV2500 / NV3500 BRExhaust 106-0296 System kit; 2.5 in. and 2.125 in. U-bolt clamps, 2-bolt gaskets, nuts, bolts

Year ranges above come from each listing title. Some listings cover more than one engine or body, so always read the product page before you order.

Replacement kit or performance exhaust?

A direct-fit replacement kit is built to put the truck back to its factory form and function. If you want more sound or a different tip, look at a cat-back or axle-back system instead: cat-back vs axle-back exhaust, single vs dual exhaust, and the sound-level guides for Borla, MagnaFlow and Corsa. Most of those systems are made for newer trucks, so on an older truck the replacement kit is often the practical choice.

Before you order

  1. Find your year, engine and body style (cab, bed, wheelbase) and match them to the listing.
  2. Look at your old exhaust and note which sections are bad: front pipe, intermediate pipe, muffler or tailpipe.
  3. Compare the OE interchange numbers on the listing to your factory parts when two kits list the same truck.
  4. Soak old bolts and clamps with penetrating oil the day before. Rusted hangers and studs are the usual hold-up.
  5. Check for exhaust leaks after the first drive and re-tighten clamps as the instructions say.

FAQ

Does a BRExhaust kit include a catalytic converter?

No. The system kits replace parts from behind or near the last catalytic converter back, and their specs list "Catalytic Converter Included: No."

Do I need to weld anything?

The listings say no bending or welding is required. The kits bolt on with the clamps and gaskets included.

Will it sound louder than stock?

These are replacement kits made to restore the factory system, not performance exhausts. For a louder sound, look at a cat-back system.

What's the difference between aluminized and stainless steel here?

BRExhaust lists its system and muffler kits as aluminized steel and its front pipe kits as stainless steel. Both are listed as corrosion resistant; stainless generally resists rust longer.

My truck isn't in these tables. Do you have a kit?

We list only the truck, Jeep, SUV and van kits here. See every kit on the BRExhaust page or all exhausts and mufflers, and select your vehicle at the top of the site.

Brexhaust, Exhaust, How-to