Quick answer
A toolbox fits if three numbers on your truck work with the box: the inside width at the bed rails (crossover and saddle boxes), the width between the wheel wells (anything that sits on the floor between them) and the bed length. Full-size trucks and mid-size trucks take different boxes. Use the automaker numbers below as a starting point, then measure your own bed, because rails, liners and trims change the real fit.
This guide is a reference, not a sales page. Every truck number below comes from the automaker’s own published specs, with the source linked. If we could not find an automaker number, the cell says “measure your truck” instead of guessing.
Bed sizes by truck
| Truck | Bed | Length at floor | Max inside width | Between wheel wells | Depth | Source |
|---|---|---|---|---|---|---|
| Ford F-150 (2026 spec) | 5.5 ft | 67.1 | measure your truck | 50.6 | 21.4 | [1] |
| Ford F-150 (2026 spec) | 6.5 ft | 78.9 | measure your truck | 50.6 | 21.4 | [1] |
| Ford F-150 (2026 spec) | 8 ft | 97.6 | measure your truck | 50.6 | 21.4 | [1] |
| Ford F-250 / F-350 Super Duty (2025 spec) | 6¾ ft | 81.9 | 66.9 | 50.5 | 21.1 | [2] |
| Ford F-250 / F-350 Super Duty (2025 spec) | 8 ft | 98.1 | 66.9 | 50.5 | 21.1 | [2] |
| Ford Ranger (2026 spec) | 5 ft | 59.6 | 62.4 | 48.2 | 20.8 | [3] |
| Chevy Silverado 1500 / GMC Sierra 1500 (GM 2020 body builder guide; not the redesigned 2027) | 5' 8", 6' 6" or 8' | measure your truck | measure your truck | 50.6 | measure your truck | [4] |
| Chevy Silverado HD / GMC Sierra HD | Standard or 8 ft | measure your truck | measure your truck | measure your truck | measure your truck | — |
| Chevy Colorado / GMC Canyon | Short box | measure your truck | measure your truck | measure your truck | measure your truck | — |
| Ram 1500 (2025 spec, standard bed) | 5' 7" | 67.4 | 66.4 | 51.0 | 21.4 | [5] |
| Ram 1500 (2025 spec, standard bed) | 6' 4" | 76.3 | 66.4 | 51.0 | 21.5 | [5] |
| Ram 2500 / 3500 | 6' 4" | 76.3 | 66.4 | 51.0 | 20.1 | [6] |
| Ram 2500 / 3500 with RamBox | 6' 4" | 76.3 | 50.0 | 48.1 | 20.1 | [6] |
| Ram 2500 / 3500 | 8' | 98.3 | 66.4 | 51.0 | 20.2 | [6] |
| Toyota Tundra (2025 spec) | 5.5 ft | 65.6 | 58.7 | 48.7 | 20.9 | [7] |
| Toyota Tundra (2025 spec) | 6.5 ft | 77.6 | 58.7 | 48.7 | 20.9 | [7] |
| Toyota Tundra (2025 spec) | 8.1 ft | 96.5 | 58.7 | 48.7 | 20.9 | [7] |
| Toyota Tacoma (2025 spec) | 5 ft | 60.3 | 53.0 (56.4 at accessory rail) | 44.7 | measure your truck | [8] |
| Toyota Tacoma (2025 spec) | 6 ft | 73.5 | 53.0 (56.4 at accessory rail) | 44.7 | measure your truck | [8] |
| Nissan Frontier | 5 ft or 6 ft | measure your truck | measure your truck | measure your truck | measure your truck | — |
| Jeep Gladiator (2026 spec) | 5 ft | 60.3 | 56.8 | 44.8 | measure your truck | [9] |
Source: TruckArmy.com Truck Bed Toolbox Fit Guide (truckarmy.com/blogs/news/truck-bed-toolbox-fit-guide). Numbers are the automaker’s published figures for the model year shown. Specs change between model years, cab styles and trims, so always measure your own truck before you buy.
About the widths: automakers publish the maximum inside width of the bed (usually measured low in the bed, wall to wall). The width at the top of the rails, where a crossover box actually sits, is often different, and most automakers don’t publish it. Toyota is one exception: it lists the 2025 Tacoma at 53.0 in. at the floor and 56.4 in. at the accessory rail. For any crossover or saddle box, measure rail to rail yourself.
Blank cells: GM does not publish full bed widths for the Silverado/Sierra in a document we could verify, and we could not find automaker-published figures for the Silverado HD/Sierra HD, Colorado/Canyon or Nissan Frontier. GM has not yet published bed dimensions for the redesigned 2027 Silverado 1500 that we could find. Those cells are left blank on purpose. Measure your truck.
How to measure your truck bed
- Rail-to-rail width (A). Measure across the bed between the inner edges of the bed rails, right behind the cab where a crossover box would sit. Weather Guard® tells buyers to measure between the bed rails and at the widest point inside the bed.
- Between the wheel wells (B). Measure the narrowest point between the wheel wells. Drawer systems, cargo slides and anything else that sits on the floor between the wheel wells has to clear this.
- Bed length (C). Measure along the floor from the front wall (bulkhead) to the inside of the closed tailgate. For side mount boxes, also measure how much bed rail is free from the cab to the tailgate.
- Bed wall height. Measure from the bed floor to the top of the rail. This tells you how deep a box can hang and whether a low profile or standard box makes more sense.
- Obstructions. Note anything that sticks out: bed liners, rail caps, tie-down systems, stake-pocket covers, bed lights or a fifth-wheel or gooseneck hitch. Weather Guard® notes these can block a box even when the main numbers work.
- Write down year, make, model, cab and bed. Fit lists are specific to these.
Which toolbox style fits where
- Crossover / saddle boxes sit across the rails behind the cab. Match the box’s length and lip to your rail-to-rail measurement (A). Full-size and mid-size trucks use different lengths.
- Side mount (lo-side and hi-side) boxes sit on one rail along the side. Check the free rail length (C) and how far the box reaches into the bed.
- Chest boxes sit on the bed floor against the front wall. Measure the inside width of your bed where the box will sit. If it will sit between or over the wheel wells, it must also clear (B).
- Underbody boxes mount under a flatbed or service body, not in a pickup bed.
Common gotchas
- Low profile vs standard height. A low profile box sits close to the rails and keeps more of your rear-window view. Taller boxes hold more but sit higher.
- Tonneau covers. A crossover box needs a toolbox-compatible (shorter) cover. A standard full-length cover will not fit.
- RamBox beds are narrower. Ram’s own 2500/3500 figures show 50.0 in. at the floor and 48.1 in. between the wheelhouses with RamBox, versus 66.4 in. and 51.0 in. without it.
- Deep boxes and some trucks. Not every deep box lists every truck. For example, our listing for the Weather Guard® 123 deep saddle box names Ram 2500/3500 but not Ram 1500. Trust the box’s fit list, not the box size alone.
- Gull wing vs single lid. A single lid opens from one side. A gull wing box has lids that open from both sides of the truck.
- Bed rail caps, liners and rail systems can change the clamping surface. Check them before you order.
- Model years and trims change. The numbers above are for the model year shown. Earlier or later years, special trims and composite or carbon beds can differ.
Shop boxes that fit
Every box below lists its fitment on its product page. Only the trucks named in that list are confirmed; measure yours either way.
Full-size crossover (saddle) boxes
- Weather Guard® 121-5-04 low profile saddle box: listing names 2018–2027 F-150/Super Duty, Silverado and Sierra 1500/HD, Ram 1500/2500/3500 and Tundra.
- Weather Guard® 127-5-04 standard saddle box: same truck list as the 121.
- Weather Guard® 123-5-04 deep saddle box (72 × 20 × 24 in.): listing names F-150/Super Duty, Silverado and Sierra 1500/HD, Ram 2500/3500 and Tundra. Ram 1500 is not on its list.
Mid-size crossover boxes
- Weather Guard® 131-5-04 mid-size low profile and 137-5-04 mid-size deep: listings name 2018–2027 Ranger and Maverick, Colorado, Canyon and Tacoma.
- Weather Guard® 154-5-04 mid-size (62 × 20 × 13 in.): listing names 2018–2027 Ranger, Colorado, Canyon and Tacoma.
Side mount boxes
- Weather Guard® 184-5-04, 41 in. and 174-5-04, 56 in.: listings include full-size trucks plus Ranger, Colorado, Canyon, Tacoma, Gladiator and Frontier.
- Weather Guard® 164-5-04, 87 in.: listing names full-size trucks only.
- Weather Guard® 372-5-02 Hi-Side, 72.25 in.: listing names full-size and mid-size trucks.
Browse all crossover toolboxes, side mount toolboxes, chest toolboxes and underbody toolboxes, or shop by brand: Weather Guard®, UWS and BETTER BUILT®. UWS lists most of its boxes as universal fit, so compare each box's drawing dimensions with your measurements.
More help: our tonneau cover vs truck cap guide, the Toolboxes category guide and all Truck Buying Guides. Questions about a specific box? Contact us.
Printing or sharing this table? Go ahead. Please link to this page so others get the latest numbers and sources.
Frequently asked questions
How do I know if a toolbox will fit my truck?
Measure three things on your own truck: the inside width at the bed rails (for crossover and saddle boxes), the narrowest width between the wheel wells (for anything that sits between them) and the bed length. Then compare those numbers with the box's listed length, width and height, and check the box's fitment list for your make, model and year. Weather Guard® and UWS both tell buyers to measure before ordering.
What size crossover toolbox fits a full-size truck?
Weather Guard® full-size saddle (crossover) boxes are 72 in. long, and its mid-size boxes are about 62 in. long. Our listings for the full-size boxes name trucks such as the F-150 and Super Duty, Silverado and Sierra, Ram 1500/2500/3500 and Tundra, but bed rails differ by model, so measure your rail-to-rail width before you order.
Will a full-size crossover box fit a mid-size truck like a Tacoma, Ranger or Colorado?
Usually not. Mid-size beds are narrower. Toyota lists the 2025 Tacoma bed at 53.0 in. wide at the floor and 56.4 in. at the accessory rail, and Ford lists the 2026 Ranger's maximum inside width at 62.4 in. Look for mid-size boxes whose listings name your truck, such as the Weather Guard® 131, 137 and 154 series.
What is the width between the wheel wells on an F-150?
Ford lists 50.6 in. between the wheelhouses for all three 2026 F-150 bed lengths (5.5, 6.5 and 8 ft).
Does a chest toolbox have to fit between the wheel wells?
Only if it sits between them. A chest box normally sits on the floor against the front wall of the bed, so measure the inside width of your bed where the box will go. If it will sit between or over the wheel wells, its length also has to clear the width between them.
Will a crossover toolbox work with a tonneau cover?
Only with a toolbox-compatible (shorter) tonneau cover. A standard full-length cover will not fit with a crossover box behind the cab. Low-profile boxes are the most common match.
Does Ram's RamBox change which toolbox fits?
Yes. Ram's own figures for the 2500/3500 6' 4" bed show 66.4 in. maximum width at the floor and 51.0 in. between the wheelhouses, but 50.0 in. and 48.1 in. with RamBox. Measure your truck and check the box's fitment notes before ordering.
Do I have to drill my bed to install a toolbox?
Most crossover boxes clamp to the bed rails with J-hooks and need no drilling. Chest, side mount and underbody boxes are usually bolted down, so some drilling may be required. Each product page lists what is included.
Sources
- [1] Ford, 2026 F-150 Technical Specifications
- [2] Ford, 2025 F-Series Super Duty Technical Specifications
- [3] Ford, 2026 Ranger Technical Specifications
- [4] GM Upfitter, Full Size Light Duty Pickups body builder manual (2020)
- [5] Ram, 2025 Ram 1500 Specifications
- [6] Ram Canada, Ram 2500 and 3500 Cargo Box Dimensions
- [7] Toyota, 2025 Tundra Product Information
- [8] Toyota, 2025 Tacoma Product Information
- [9] Jeep, 2026 Jeep Gladiator Specifications
- Weather Guard®, How to measure your truck bed
- UWS, How to measure your truck bed for a tool box
Last checked November 16, 2026. Automakers revise specs; if you find a newer official figure, let us know and we will update the table.

