TrailFX 120703 Crossover Contractor Truck Bed Tool Box, Angled Single-Lid Diamond Tread Aluminum, Matte Black

Table of Contents

Last Updated: October 21, 2026

What Is a Crossover Truck Tool Box?

A crossover tool box mounts across the front of your truck bed, resting on both bed rails just behind the cab. It keeps your tools locked up and within reach from either side of the truck, while leaving the rest of the bed open for cargo.

A good starting point is the TrailFX 120633C 63-Inch Black Matte Aluminum Crossover Low-Profile Tool Box. Per the listing, it has a black matte powder coat over 16-gauge aluminum, a diamond-plate surface, a lockable lid with a pull handle, lid shocks, and an interior tray. Confirm fitment for your truck before you order.

Below, we'll cover finishes, security, sizing, tonneau cover compatibility, and installation so you can pick the right box the first time.

Matte Black vs. Black Powder Coat

Most of the crossover boxes we carry come in a black finish, either matte or standard powder coat. Both protect the aluminum underneath. The difference is mostly looks.

Matte black has a flat, low-glare look that matches black wheels, trim, and blacked-out builds. The TrailFX 120633 Angled Crossover Aluminum Truck Bed Tool Box, Matte Black Diamond Tread is a good example. The listing describes a matte black finish with a diamond-tread surface, an angled profile, and a lockable paddle handle. It measures 63 x 19.25 x 13.5 inches. Confirm fitment for your truck.

Standard black powder coat has a bit more sheen and a classic work-truck look. Either way, looks are only half of it. A good box keeps your gear dry, locked, and organized. The rest of this guide covers what to check before you buy.

Crossover Truck Tool Box Design and Security Features

Because a crossover box sits across the front of the bed, you keep usable bed space below and behind it, and your most-used tools stay within reach from either side.

Low-profile crossovers sit at or near the bed rails, which helps keep your rear window view clear. Angled models follow the shape of the bed sides for a cleaner look.

Locking and Theft Resistance

Every box in this guide has a lockable lid. Depending on the model, you open it with a paddle handle or a pull handle. Check the listing for the handle style you prefer.

When you inspect a box, look for a lid that closes evenly with no gaps. A gap at the latch is an easy spot for a pry bar.

Pro Tip If you carry lots of small tools, pick a box with an included tray. The 120633C, 120693C, and 120702 listings all include one, which keeps small items from sliding around.

Weather Protection

The TrailFX listings describe these boxes as weather-resistant. The seal around the lid does most of the work, so keep it clean and check it often.

The powder-coated finish adds a protective layer over the aluminum, and the diamond-tread surface helps resist scuffs.

Truck Toolbox Size and Fitment Considerations

Pick a size based on what you actually carry and what your bed can fit. Too big wastes space. Too small gets frustrating fast.

Measuring Your Bed and Checking Clearance

Measure the inside width of your bed at the front, and the rail-to-rail width where the box will sit. Box length must match your bed. Mid-size trucks usually need a shorter box than full-size trucks.

For full-size trucks, the TrailFX 120693C Low-Profile Crossover Aluminum Truck Tool Box, Black Matte Diamond Tread measures 69 x 19.25 x 13.5 inches. The listing says it fits a wide range of pickups, including select Chevrolet Silverado, GMC Sierra, Toyota Tundra, and Ford F-150 models. It has a pull handle and an included tray. Confirm fitment for your truck.

Height matters too. Low-profile boxes in this guide are 13.5 inches tall. Taller chest-style crossovers like the 150602 are listed at 17-1/8 inches. Check clearance against your rear window, any rack, and anything else in the bed.

Watch Out "Universal fit" does not mean it fits every truck. Measure your bed and compare it to the box dimensions on the listing before you order. A box that's too long won't sit on the rails, and one that's too short will shift.

Crossover Sizes Compared

Here's a quick look at the crossover boxes covered in this guide. Dimensions and features come from the product listings.

Model Size (L x W x H) Finish Notes
TrailFX 120633C 63-inch Black matte Angled low profile, tray, lid shocks
TrailFX 120633 63 x 19.25 x 13.5 in Matte black Angled, lockable paddle handle
TrailFX 120693C 69 x 19.25 x 13.5 in Black matte Low profile, pull handle, tray
TrailFX 120703 69 x 19.25 x 13.5 in Matte black Angled low profile, paddle handle
TrailFX 120702 69 x 19.25 x 13.5 in Black powder coat Low profile, tray, lid shocks
TrailFX 150602 60 x 19-7/8 x 17-1/8 in Black powder coat About 12 cu ft, paddle handle, lid shocks
TrailFX 150562 54 x 19-7/8 x 17-1/8 in Black powder coat Shorter box, paddle handle, lid shocks

Want the most room? The TrailFX 150602 Black Aluminum Crossover Contractor Truck Tool Box, 12 Cu. Ft. is a taller chest-style crossover with a black powder-coated, diamond-plate finish. Per the listing, it offers about 12 cubic feet of storage, a lockable paddle handle, and lid shocks. Confirm fitment for your truck.

Truck Tool Box Finish and Maintenance

A powder-coated finish needs little care, but a little care goes a long way.

Wash the box with mild soap and water, then dry it. Pay attention to the seams and the area around the lock, where water and dirt collect. If you drive on salted roads or off-road, rinse it more often.

The diamond-tread surface handles scuffs well. If a deep gouge exposes bare aluminum, clean it and seal it. Don't paint over the powder coat; the listings say it isn't designed for painting.

Check the lid seal once a year. If it's hard, cracked, or no longer compresses, replace it. If your box has lid shocks and the lid won't stay open, the shocks are worn and should be replaced.

Truck Tool Box with Tonneau Cover Compatibility

This is where many owners get surprised. A crossover box sits on the bed rails, and many tonneau covers also mount at the rails.

For example, the TrailFX HF3 hard folding covers in our tonneau cover guide are listed as not compatible with toolboxes. If you want both a crossover box and a bed cover, look for a cover that is specifically listed as toolbox-compatible, and check the listing before you buy.

A low-profile box like the TrailFX 120702 Low-Profile Crossover Aluminum Truck Bed Tool Box, Black Powder Coated keeps the height down at 13.5 inches. Per the listing, it also has a dual-layer aluminum lid with high-density foam, lid shocks, and an included tray. Confirm fitment for your truck.

Installation and Mounting Requirements

Crossover boxes rest on the bed rails and are secured with bolts or clamp-style hardware. Some installs need holes drilled; others don't. Check the product details for what's included and what the install requires.

Drilling gives a very solid mount but leaves permanent holes. If you might remove the box later, plan for that.

Typical tools: a socket set, a drill if needed, and a level. A helper makes it easier to set the box in place without scratching the finish.

Set the box as far forward as it will go without touching the cab. Then open and close the lid a few times to make sure nothing binds.

Truck Army Tech Tip: Protecting Your Investment

Don't put wet tools in the box. Dry them first. A moisture-absorbing pack inside the box helps in humid weather.

Check the lock every few months. A light shot of lubricant keeps the handle and lock working smoothly. And keep the lid seal clean; dirt on the seal is the most common reason water gets in.

Conclusion

A crossover tool box is one of the most useful upgrades you can make to a work or weekend truck. Pick your size, measure your bed, check tonneau cover compatibility, and confirm fitment for your truck before you order.

For a 63-inch option, look at the TrailFX 120633C or 120633. For full-size trucks, the 120693C, 120703, and 120702 come in at 69 inches. For maximum storage, step up to the 150602.

Frequently Asked Questions

What is a crossover truck tool box?

A crossover tool box mounts across the front of the truck bed and rests on both bed rails, just behind the cab. It gives you locked storage you can reach from either side of the truck while leaving most of the bed open for cargo.

What is the difference between a low-profile crossover and a chest-style crossover tool box?

Both mount across the front of the bed. A low-profile crossover sits lower, which helps keep your rear view clear. The low-profile TrailFX boxes in this guide are 13.5 inches tall. A chest-style crossover is taller and holds more. The TrailFX 150602 is listed at 17-1/8 inches tall with about 12 cubic feet of storage.

Will a crossover tool box work with a tonneau cover?

Only with a cover that is listed as toolbox-compatible. Many hard folding covers, including the TrailFX HF3, are listed as not compatible with toolboxes. Check the tonneau cover listing before buying both.

How do you choose a truck tool box that fits your bed?

Measure your bed width at the front and compare it to the box length on the listing. The TrailFX 120633 and 120633C are 63-inch boxes, while the 120693C, 120703, and 120702 are 69 inches long. Then check height against your rear window and any accessories, and confirm fitment for your year, make, and model.

How do you protect a black tool box from scratches and weather?

Wash it with mild soap and water and dry it. Avoid abrasive cleaners. Rinse more often if you drive on salted roads or off-road. Check the lid seal at least once a year and replace it if it's hard or cracked.

Crossover truck tool box, Truck tool box finish and maintenance, Truck tool box with tonneau cover, Truck toolbox size and fitment