Factor 55 ProLink winch shackle mount in black

Quick answer: Factor 55 makes two kinds of shackle mounts. Winch-line mounts replace the hook on your winch cable or rope: the ProLink is a fixed shackle mount, the FlatLink folds flat against the fairlead, and the UltraHook keeps a latched hook with a shackle hole built in. XTV versions are sized for ATV and UTV winches. HitchLink mounts slide into your receiver to give you a rear recovery point; match the HitchLink to your 2 in., 2.5 in. or 3 in. receiver.

We carry a wide range of Factor 55 mounts, in several anodized and powder-coat colors. This guide compares the models using the details on each product listing. Factor 55 lists them as universal fit (not vehicle-specific), so the things to match are your winch line diameter, your shackle size and, for HitchLink, your receiver size.

Winch-line shackle mounts compared

Model Style Winch line Shackle / notes from the listing
ProLink (00015) Fixed shackle mount Steel or synthetic up to 3/8 in. Takes a standard 3/4 in. screw-pin shackle; removable 5/8 in. titanium double-shear pin; works with Hawse and roller fairleads; 6061 aluminum, machined in the USA
FlatLink (00050) Folding Steel or synthetic up to 3/8 in. Screw-pin or soft shackles; folds to under 1.75 in. thick; works with roller fairlead license plate brackets; installs without splicing
FlatLink E Expert (00080) Folding, large opening Steel or synthetic up to 3/8 in. Pear-shaped opening takes the pin or bow end of common 3/4 in. screw-pin shackles, soft shackles and many original-equipment recovery points
FlatLink MultiMount (00225) Folding, 3 mounting holes See listing Center hole for a bow or soft shackle that can rotate with the load; two outer holes for bridle rigging; folds to under 1.75 in.
UltraHook (00250) Hook with shackle hole Steel or synthetic up to 3/8 in. Safety latch with a secondary lock (locking pin stored in the hook); 7075 aluminum; 5/8 in. titanium double-shear pin

Which one to pick

  • Simple shackle-only setup: ProLink.
  • Want it tucked out of the way (license plate on the fairlead, approach angle): FlatLink or FlatLink E. The FlatLink E's large opening also takes the bow end of a shackle and many factory recovery points.
  • Bridle pulls and changing pull directions: FlatLink MultiMount.
  • Still want a hook: UltraHook.

ATV and UTV: the XTV versions

  • ProLink XTV (00110): shackle or D-ring mount for winch lines up to 5/16 in.; titanium double-shear pin and internal snap ring; installs without splicing.
  • FlatLink XTV (00070): folds into the fairlead when not in use; lines up to 5/16 in.; Factor 55 says it gives a better approach angle than the ProLink XTV.
  • UltraHook XTV (00275): latched hook with a shackle hole that accepts the screw pins of common 1/2 in. and 5/8 in. shackles and soft shackles up to 7/16 in.

HitchLink receiver shackle mounts

A HitchLink slides into your receiver and turns it into a recovery or towing point. Each one is secured with a hitch pin, which is not included.

Model Receiver Rating (listing) Shackles
HitchLink 2.0 (00020) 2 in. 9,500 lb. 3/4 in. screw-pin shackle; soft shackles up to 1/2 in.
HitchLink Pro 2.0 (00029) 2 in. 9,500 lb. (50,000 lb. breaking strength in Factor 55's destructive testing) 3/4 in. screw-pin shackle; soft shackles up to 1/2 in.; cross-drilled so it can sit in any 90-degree orientation
HitchLink 2.5 (00022) Class V 2.5 in. See listing 3/4 in. screw-pin shackles (7/8 in. pin) and 7/8 in. screw-pin shackles (1 in. pin); no reducer needed
HitchLink 3.0 (00027) Class V 3 in. 18,000 lb. See listing; no reducer needed

Need a pin? The Factor 55 00036 quick-release hitch pin is listed for 2 in. and 2-1/2 in. receivers. For other sizes see our hitch pin and hitch lock guide. Factor 55 also sells kits that include a HitchLink, such as the Borah advanced vehicle recovery kit and the Hemingway winch accessory kit.

Spare pins and service parts

We also stock Factor 55 service parts, listed by the mount they fit: the 00013 titanium pin (ProLink, ProLink E, Bridle and FlatLink), 00277 (UltraHook XTV and FlatLink XTV), 00113 (ProLink XTV), retaining ring sets 10511 (ProLink and FlatLink) and 10510 (XTV models), and UltraHook latch kits 00255 and 00256 (XTV). XXL pins, retaining rings and rope spools are listed too.

Recovery basics

  • Use rated shackles, straps and recovery points, and never go over the lowest rating in the setup.
  • Never use a tow ball as a recovery point.
  • Inspect the mount, pin, shackle and winch line before every recovery.

Read more: D-ring vs soft shackles, recovery strap vs tow strap and what size winch do I need. Shop winch accessories, shackles and tow hooks, recovery gear or winches.

FAQ

What is the difference between the Factor 55 ProLink and FlatLink?

Both replace the hook on the end of your winch line with a shackle mount and fit steel cable or synthetic rope up to 3/8 in. The ProLink is a fixed mount that takes a standard 3/4 in. screw-pin shackle. The FlatLink folds flat against a roller or Hawse fairlead (under 1.75 in. thick folded), which keeps it out of the way and works with roller fairlead license plate brackets.

Should I get an UltraHook or a ProLink?

The UltraHook is a winch hook with a safety latch that also has a shackle mount hole machined into it, so you can hook straight onto a recovery point or run a shackle. The ProLink and FlatLink drop the hook and use a shackle only. Pick the UltraHook if you want the speed of a hook; pick a ProLink or FlatLink for a shackle-only setup.

Which Factor 55 mount fits a UTV or ATV winch?

Use the XTV versions: the ProLink XTV and FlatLink XTV fit winch lines up to 5/16 in., and the UltraHook XTV is the XTV version of the UltraHook. The FlatLink XTV folds into the fairlead and, per Factor 55, gives a better approach angle than the ProLink XTV.

Which HitchLink fits my receiver?

Match the HitchLink to your receiver: HitchLink 2.0 or HitchLink Pro 2.0 for a 2 in. receiver, HitchLink 2.5 for a Class V 2.5 in. receiver and HitchLink 3.0 for a Class V 3 in. receiver. None of them include a hitch pin.

Can I use my tow ball as a recovery point?

No. A tow ball isn't made for recovery loads. Use a rated receiver shackle mount such as a HitchLink with a rated shackle, or a rated frame-mounted recovery point.

Buying guide, Factor 55, Recovery, Winch accessories