Quick answer: Match the hitch pin to the pin hole diameter (usually 1/2 in. for 1-1/4 in. receivers and 5/8 in. for 2 in. receivers) and make sure its usable length is longer than your receiver is wide. Choose a locking pin if you leave a ball mount, step or rack in the receiver, add an anti-rattle tightener to quiet a loose shank, and use a coupler lock to secure the trailer itself.
Hitch pins are small, but the wrong size won't go in or won't take the clip. This guide covers the hitch pins, hitch locks, anti-rattle tighteners and coupler locks we carry from Husky Towing, GEN-Y Hitch and Factor 55, using the details on each product listing. Most are on our ball mounts, hitch balls and pins page.
How to size a hitch pin
- Diameter: the pin must match the hole in your receiver and shank. Common sizes are 1/2 in. (1-1/4 in. receivers), 5/8 in. (2 in. and many 2-1/2 in. receivers) and 3/4 in. (some heavy-duty setups).
- Usable length: the distance from under the head to the clip or lock hole. It has to clear the outside width of the receiver tube.
- Style: a bent pin has an L-shaped end you grip; a straight pin with a clip or a locking head works the same way.
- What it's for: some pins are replacement parts for a specific hitch (for example Husky weight distribution or One-Mount parts). Those listings name the hitch they fit.
Standard and replacement hitch pins
| Pin | Diameter | Usable length / size | Notes from the listing |
|---|---|---|---|
| GEN-Y GH-096 | 5/8 in. | 3.5 in. | Stainless steel; self-locking twist clip; fits 2 in. and 2.5 in. receivers |
| GEN-Y GH-099 | 5/8 in. | 4 in. | Stainless steel; self-locking twist clip; fits 2 in. and 2.5 in. receivers |
| GEN-Y GH-097 | 3/4 in. | 4.25 in. | Stainless steel; self-locking twist clip |
| GEN-Y GH-098 | 3/4 in. | 5.25 in. | Sold as a gooseneck coupler pin; stainless steel; twist clip |
| Factor 55 00036 | 5/8 in. | 2 in. and 2-1/2 in. receivers | Quick-release stainless steel pin; listed at more than 50,000 lb. shear strength; made in the USA |
| Husky Towing 33790 | 5/8 in. | Hole style with 3 in. clip | Listed for the Husky 31330 weight distribution hitch |
| Husky Towing 33791 | 5/8 in. | Bent pin | No clip included |
| Husky Towing 34521 | 1/2 in. | See listing | Clip included |
| Husky Towing 33253 | 1/2 in. | See listing | No clip included |
Husky also lists small service parts: 34853 spring clips (pack of 2, for sway control systems), the 33792 cotter pin for the Husky 31330 weight distribution hitch, and 33111 replacement pins and clips for Husky 33104, 33108 and 33109. "See listing" means the detail isn't clear in the listing summary; open the product page or contact us before ordering.
Locking hitch pins
A locking pin replaces the clip with a keyed lock, so whatever is in the receiver can't be slid out.
- Husky Towing 33165: 1/2 in. bent pin for 1-1/4 in. receivers, chrome-plated steel, dust cap and 2 keys; titled for up to 3,500 lb.
- Husky Towing 33160: 5/8 in. locking pin for 3 in. receivers, chrome-plated steel, dust cover and 2 keys. Check the listing for the pin length.
- Husky Towing 33112: a keyed-alike set of 2 locking pins with 4 keys for the Husky One-Mount system (14,000 lb. maximum capacity per the listing).
-
GEN-Y InfiniteRule security locks are sized for GEN-Y's own adjustable hitches, and each listing names the GEN-Y models it fits:
- GH-103906 (1 lock) and GH-103908 (2 locks): 5/8 in. x 3-1/8 in. span for Phantom 5K, Phantom-X 7K and 16K, Mega Duty 10K and 16K, Boss 10K and 16K, Glyder 7K.
- GH-103910: 2 of the 3-1/8 in. span locks plus a 2.5 in. receiver lock, same fitment.
- GH-103907 (1 lock), GH-103909 (2 locks) and GH-103915 (2 locks plus a 2.5 in. receiver lock): 5/8 in. x 3-5/8 in. span for the Mega Duty 21K.
- GH-103911 (1 lock), GH-103912 (plus a 3.0 in. receiver lock) and GH-103913 (2 locks plus a 3.0 in. receiver lock): 3/4 in. x 3-7/8 in. span for the Mega Duty 32K and Boss 32K.
Anti-rattle hitch tighteners
A shank needs a little clearance to slide into the receiver, and that gap is where clunks and rattles come from. GEN-Y's bolt-on steel tighteners are made to reduce that rattle; pick the one that matches your shank:
- GEN-Y GH-102229: 2 in. shank
- GEN-Y GH-102230: 2.5 in. shank
- GEN-Y GH-102269: 3 in. shank
Coupler locks and pintle locks
- Husky Towing 33164 coupler lock: a padlock-style lock with a brass 5-pin tumbler that fits most straight and A-frame coupler latches. The listing says it needs no drilling or tools and keeps the trailer from being uncoupled while it's in place.
- GEN-Y Guardian GH-105700: made for GEN-Y SnapLatch gooseneck couplers and pin boxes (Executive, Spartan, Viking and Nomad), with a disc-detainer lock core.
- GEN-Y replacement pintle locks: GH-032 (10–16K, 2 in. shank), GH-062 (21K, 2.5 in. shank) and GH-0162 (32K, 2.5 in. shank). These are the pintle lock parts that come with GEN-Y BOSS and MEGA-DUTY drop hitches.
Flat towing a car or Jeep? The CURT 70005 lock set secures the CURT Rambler tow bar; see our flat towing setup guide.
Quick checks before every trip
- The pin goes all the way through both sides of the receiver and the clip or lock is fully seated.
- The lock or clip isn't rusted or bent; replace worn pins and clips.
- Lubricate the locks now and then, and keep the dust caps on.
- Safety chains are crossed under the coupler and the wiring is connected.
Related guides
Trailer hitch classes explained, What size ball mount do I need?, Hitch step guide and Gooseneck puck system guide. Shop receiver hitches, ball mounts, hitch balls and pins or all towing gear.
FAQ
What size hitch pin do I need for a 2-inch receiver?
Most 2 in. receivers take a 5/8 in. pin, and 1-1/4 in. receivers usually take a 1/2 in. pin. Heavy-duty 2-1/2 in. and 3 in. setups can use 5/8 in. or 3/4 in. pins, so check the pin hole in your receiver and shank or the hitch maker's instructions before you order.
What does usable length mean on a hitch pin?
Usable length is the part of the pin between the head and the clip or lock. It has to be longer than the outside width of your receiver so the clip or lock can go on. GEN-Y lists 3.5 in., 4 in., 4.25 in. and 5.25 in. usable lengths on its pins.
Do I need a locking hitch pin?
A locking pin uses a key instead of a clip, so the ball mount, hitch step or bike rack can't simply be pulled out of the receiver. It is a theft deterrent; it doesn't change your towing ratings.
How do I stop my hitch from rattling?
Some play between the shank and the receiver is normal. A bolt-on anti-rattle tightener such as the GEN-Y GH-102229 (2 in.), GH-102230 (2.5 in.) or GH-102269 (3 in.) is made to reduce that rattle. Pick the one that matches your shank size.
Is a coupler lock the same as a hitch lock?
No. A hitch lock (locking pin) secures the ball mount or accessory in the receiver. A coupler lock goes on the trailer's coupler latch so the trailer can't be hooked up or uncoupled while it's locked. The Husky 33164 fits most straight and A-frame coupler latches, and the GEN-Y Guardian GH-105700 is made for GEN-Y gooseneck couplers and pin boxes.


