CURT Rambler RV tow bar for flat towing
Quick answer: A flat-towing (dinghy) setup has four parts: a base plate on the towed vehicle, a tow bar to the RV hitch, wiring so the towed vehicle's lights follow the RV's, and in most places a supplemental braking system. First confirm in the owner's manual that your vehicle can be flat towed. Every part we mention below is a CURT product we carry; check each listing's fit and rating.

1. Check that your vehicle can be flat towed

Flat towing means towing a vehicle with all four wheels on the road behind a motorhome. Many Jeep Wranglers, Gladiators and Ford Broncos are popular dinghy vehicles, but not every vehicle, drivetrain or transmission can be towed this way. The owner's manual says whether it's allowed and lists the steps (for example, transfer case in neutral). Follow those steps every time.

2. The four parts of a dinghy towing setup

Part What it does CURT parts we carry
Base plate Bolts to the towed vehicle's frame and gives the tow bar attachment points 70105 for 2018–2026 Jeep Wrangler
Tow bar Connects the base plate to the RV's 2 in. receiver 70015 Rambler (7,500 lb.), 70012 Seeker (10,000 lb.)
Wiring Makes the towed vehicle's tail, brake and turn lights follow the RV Vehicle-specific harnesses, 58999 diode kit, 56196 converter, 53200 magnetic lights
Supplemental brake Applies the towed vehicle's brakes when the RV brakes 52202 RVibrake 4

3. Base plate

Base plates are made for one vehicle. The CURT 70105 is listed for 2018–2026 Jeep Wrangler (JL). Its listing says drilling is required, estimates 90+ minutes to install, and includes the base plate, safety cables and installation hardware; the tow bar is sold separately and it is not compatible with a universal tow bar. It uses twist-lock attachment tabs that can be removed when you're not towing.

4. Tow bar

Tow bar Rating (gross towed vehicle weight) Notes from the listing
CURT 70015 Rambler 7,500 lb. 2 in. shank, under 40 lb., hands-free locking arms, arms fold left or right for storage
CURT 70012 Seeker 10,000 lb. 2 in. shank, hands-free locking, three storage positions

Add the 70005 lock set (three keyed-alike locks: two 1/2 in. pins for the attachment tabs and one 5/8 in. pin for the shank). Pick a tow bar rated at or above your towed vehicle's weight, and check the RV hitch rating too.

5. Wiring the towed vehicle's lights

The towed vehicle needs working tail, brake and turn lights that follow the RV. There are three ways to do it:

  • Vehicle-specific harness (easiest): CURT towed-vehicle RV harnesses plug into the factory wiring with no cutting or splicing, have built-in diodes to protect the vehicle's circuits, and give you a 4-way flat plug.
  • Diode kit or converter (any vehicle): the 58999 diode kit lets the RV power only the towed vehicle's signal lights without feeding back (it needs a 4-way flat plug with 20 ft. wires, sold separately). The 56196 splices in to convert a 2-wire system to 3-wire.
  • Magnetic tow lights (no wiring into the vehicle): 53200 and 53204 with storage case set on the vehicle with non-scratch magnets and have a 20 ft. cord with a 4-way flat plug.

If your RV has a 7-way RV blade socket, the 58980 adapter plugs into a CURT RV harness's 4-way output and gives the towed vehicle a 7-way RV blade connector (some splicing required, per the listing).

Vehicle-specific towed-vehicle harnesses we carry

Vehicle (as listed) CURT part
2018–2026 Jeep Wrangler (JL), 2020–2026 Gladiator 58964
2007–2017 Jeep Wrangler, 2018 Wrangler JK 58903
1998–2006 Jeep Wrangler 58902
2021–2026 Ford Bronco 58996, 58992 (compare the two listings' fit notes)
Ford F-150 52103 (2021–2023), 52110 (2021–2026)
Ram 1500 52112 (2025–2026), 58975 (2019–2024), 58906 (2013–2018, 2019–2024 Classic)
Chevy Colorado / GMC Canyon 52108 (2023–2026), 58910 (2015–2022)
Chevy Silverado / GMC Sierra (select) 58984
2021–2024 Chevy Tahoe / Suburban and more 58985
Jeep Grand Cherokee 58998 (2021–2026 L, 2022–2026), 58907 (2014–2021, 2022 WK)
2019–2023 Jeep Cherokee 58963

A harness only matters if the vehicle itself can be flat towed, so check the owner's manual first.

6. Supplemental braking

A supplemental braking system applies the towed vehicle's brakes when the RV brakes. CURT's RVibrake 4 is a portable unit; per its listing, it includes a Bullseye wireless monitor and range extender, sets up in about 30 seconds, and only its breakaway kit needs installing (25–45 minutes). CURT says it's designed to meet braking laws in 49 states and Canada. Rules differ by state and province, so check the ones you'll drive in. For how breakaway systems work, see trailer breakaway systems explained.

Related add-ons we carry: 52204 towed battery charger plus (up to 10 amps to keep the towed battery charged) and 52216 towed battery disconnect (for vehicles that need the battery disconnected while towed).

7. Before every trip

  • Follow the owner's manual flat-towing steps (transfer case, transmission, ignition, steering).
  • Check that the tow bar arms are locked and safety cables are connected.
  • Test the towed vehicle's tail, brake and turn lights with a helper.
  • Check the braking system is set up and the breakaway is connected.

Shop flat towing parts

Towing · Trailer parts and wiring · CURT

More guides: 4-way vs 7-way trailer wiring · Jeep Wrangler build guide · Ford Bronco upgrades

Flat Towing FAQ

Can every vehicle be flat towed?

No. Many vehicles can't be towed with all four wheels down without damage to the transmission or transfer case. Check the owner's manual for a flat-towing or recreational-towing procedure before you buy any equipment.

Do I need a base plate and a tow bar?

Yes, for a tow bar setup. The base plate bolts to the towed vehicle's front frame and gives the tow bar a place to attach; the tow bar connects that base plate to the RV's hitch receiver. CURT notes its 70105 Wrangler base plate is not compatible with a universal tow bar, so match the parts.

How do I get the towed vehicle's lights to work?

Use a vehicle-specific towed-vehicle wiring harness if one is made for your vehicle; it plugs into the factory wiring and gives you a 4-way flat plug. Otherwise a diode kit or splice-in converter can be wired in, or magnetic tow lights can be set on the vehicle for each trip.

Do I need a supplemental braking system?

Rules for braking a towed vehicle differ by state and province, so check the ones you'll drive in. CURT says its RVibrake 4 is designed to meet braking laws in 49 states and Canada.

How much can a tow bar handle?

Check its rating. The CURT Rambler 70015 is rated 7,500 lb. gross towed vehicle weight and the Seeker 70012 is rated 10,000 lb. Never exceed the lowest-rated part of your setup, including the RV's hitch.

Curt, Flat towing, Jeep, Towing