Quick answer: If your truck has the factory puck system (holes in the bed from the 5th wheel / gooseneck prep package), you don't need a full gooseneck hitch. A puck gooseneck kit drops in: a ball for the center hole and two safety chain anchors. Match the kit to your truck's system: Ram uses its own pucks; Chevrolet, Ford, GMC and Nissan Titan XD share another. Then pick the ball size (2-5/16 in. or 3 in.) and a rating that covers your trailer.
We carry puck system kits, balls and anchors from CURT and Husky Towing on our fifth wheel and gooseneck hitches page. This guide compares them using the details on each product listing, and covers what to buy if your truck has no pucks.
What is the gooseneck puck system?
Many heavy-duty pickups can be ordered with a factory 5th wheel / gooseneck prep package. It puts mounting points (pucks) in the bed floor: a center hole for a gooseneck ball and anchor points for safety chains and 5th wheel legs. CURT describes its puck balls as locking in with a quarter-turn latch, and its puck safety chain anchors as dropping in without tools. When you're not towing, the parts come out and the bed is flat again.
The kits only work on trucks that have the puck system. CURT's listings say so plainly: a Ram kit "cannot be installed without" the Ram puck system, and the same goes for the Chevrolet/Ford/GMC/Nissan kits.
Puck gooseneck kits compared
A complete kit includes the ball and both anchors. The CURT kits also include a rubber hole cover and a storage case.
| Kit | Puck system | Ball | Listed rating |
|---|---|---|---|
| CURT 60692 | Chevrolet, Ford, GMC, Nissan Titan XD (select years) | 2-5/16 in. | 30,000 lbs. GTW / 7,500 lbs. vertical |
| CURT 60639 | Chevrolet, Ford, GMC, Nissan Titan XD (select years) | 2-5/16 in. | 38,000 lbs. GTW / 9,500 lbs. vertical |
| Husky Towing 33214 | Chevy, Ford, GMC, Nissan OE puck system | 2-5/16 in. | 35,000 lbs. GTW (ball) |
| CURT 60618 | Ram 2500 / 3500 (listed 2013–2027) | 2-5/16 in. | 30,000 lbs. GTW / 7,500 lbs. vertical |
| Husky Towing 33213 | Ram 2500 / 3500 (listed 2013–2020) | 2-5/16 in. | 35,000 lbs. GTW (ball) |
CURT's Chevrolet/Ford/GMC/Nissan anchors (60691) list 2016–2026 Silverado and Sierra 2500 HD / 3500 HD and 2013–2027 F-250, F-350 and F-450 Super Duty among their fits. Use the vehicle list on each listing to confirm your truck.
Buying the parts separately
- Safety chain anchors only: CURT 60691 (Chevrolet, Ford, GMC, Nissan Titan XD) or CURT 60617 (Ram, rated 30,000 lbs. GTW). Both have wide loops for large clevis hooks.
- Ram puck ball: CURT 60601, 2-5/16 in., 30,000 lbs. GTW. CURT says it also fits its OEM-style Ram hitches.
- Factory-style puck balls: CURT 60629 (2-5/16 in., 30,000 lbs. / 7,500 lbs.), CURT 60627 (2-5/16 in., 38,000 lbs. / 9,500 lbs.) and CURT 60634 (3 in., 38,000 lbs. / 9,500 lbs.). CURT lists these for Chevrolet, Ford, GMC, Nissan Titan XD and Ram puck systems, and says they don't fit other gooseneck ball holes.
- Storage case: Husky Towing 33212 replacement case for Husky puck balls, anchors and the rubber plug.
2-5/16 in. or 3 in. ball?
The 2-5/16 in. ball is the common gooseneck size, and every kit here comes with one. Some trailers use a 3 in. coupler; the CURT 60634 is the 3 in. puck ball. Always match the ball to the coupler on your trailer, and see what size ball mount do I need for bumper-pull ball sizing.
Using the pucks for a fifth wheel
The same prep package can hold a fifth wheel hitch with the right legs or mount. Husky Towing parts on our site include:
- Husky 33146 Ram puck system dual mount (listed 24,000 lbs. weight / 6,000 lbs. tongue; 2014–2024 Ram 2500, 2013–2024 Ram 3500).
- Husky 33117 puck adapter for glider and roller hitches (2011–2024 F-250 / F-350 Super Duty).
- Upright legs: 32997 (Ford factory prep package, Husky 16K hitches), 33000 (Ram factory prep package, Husky 16K hitches), 33118 (replacement OEM upright legs, 2016–2019 GM HD) and 33221 (set of 2, 26,000 lbs., 2020–2025 GM HD). Check each listing for the hitch head it pairs with.
Not sure which trailer style you need? Read fifth wheel vs gooseneck hitch.
No pucks? Under-bed and over-bed gooseneck hitches
- Husky Towing under-bed hitches for trucks without the prep package: 35202 (2020–2025 Silverado / Sierra 2500HD and 3500HD), 34201 (2017–2022 F-250 / F-350 / F-450 Super Duty) and 33205 (2019–2024 Ram 2500 / 3500). Husky lists 35,000 lbs. gross towing weight and 8,750 lbs. tongue weight, a removable 2-5/16 in. ball, and a center section that bolts to the factory crossmember with drilling only for the safety chain loops and center hole.
- CURT Double Lock: CURT 60607 under-bed hitch with a flip-and-store 2-5/16 in. ball (30,000 lbs. GTW / 7,500 lbs. tongue). It needs under-bed installation brackets for your truck.
- CURT Double Lock EZr: CURT 60619 (30,000 lbs. GTW / 7,500 lbs. vertical) uses vehicle-specific brackets and a center locator, and CURT says it installs with one person and without lowering the exhaust.
- Over-bed folding ball: CURT 61052 (30,000 lbs. GTW / 7,500 lbs. tongue). The ball folds down into the hitch when not in use, so it stays on the truck.
Useful extras
- CURT 60654 RockerBall: a cushioned 2-5/16 in. ball for CURT Double Lock, Double Lock EZr and B&W Turnoverball hitches (see the listing for compatibility).
- CURT 60602 offset ball: moves the coupling point 4 in. rearward in a Double Lock hitch for more cab clearance (20,000 lbs. GTW / 5,000 lbs. vertical).
- CURT 60616: replacement ball for the 60607 Double Lock.
- In-bed wiring for Ford trucks: CURT 57008 (7 ft.) and CURT 57010 (10 ft.) add a 7-way socket in the bed and keep the bumper socket working. See 4-way vs 7-way trailer wiring.
Shop all fifth wheel and gooseneck hitches, trailer parts and wiring or towing, or browse parts for the Ford F-250 Super Duty, Chevy Silverado 2500 HD and Ram 2500. For heavy trailers, also read trailer breakaway systems explained.
FAQ
Will a Ram puck system ball fit a Ford or GM truck?
Not always. Ram trucks use their own puck system, so CURT sells a Ram kit (60618) and separate kits for Chevrolet, Ford, GMC and Nissan Titan XD (60692 and 60639). A few CURT balls (60629, 60627 and 60634) are listed for both systems. Check the listing for your truck before you order.
Do I need tools to install a puck system gooseneck kit?
CURT lists its puck system safety chain anchors as drop-in with no tools, and its puck balls lock in with a quarter-turn latch. The truck needs the factory puck system (usually part of the 5th wheel / gooseneck prep package) for these kits to fit.
Should I buy a 30K or 38K gooseneck ball?
Pick a ball rated at or above your trailer's weight, and never tow more than the lowest-rated part of the setup: the truck, the ball, the trailer coupler or the safety chains. CURT's 30K kits are rated 30,000 lbs. GTW and 7,500 lbs. vertical load; the 38K parts are rated 38,000 lbs. and 9,500 lbs.
Can I pull a fifth wheel camper with the puck system?
Yes, with a puck-mount fifth wheel setup. Husky Towing lists uprights and mounts for the factory prep packages on Ford, GM and Ram trucks, such as the 33146 Ram puck mount and 32997 Ford legs. See our fifth wheel vs gooseneck guide for the differences.
What if my truck doesn't have the puck system?
Use an under-bed or over-bed gooseneck hitch. Husky Towing's 35202, 34201 and 33205 are made for trucks without the prep package and bolt to the factory crossmember, and CURT's Double Lock and Double Lock EZr mount under the bed with installation brackets.


