TrailFX AL6006B aluminum running boards for Ford F-150 SuperCrew
Quick answer: F-150 running boards are sold by generation and cab. For 2015 and newer trucks, most boards and nerf bars on our F-150 running boards & side steps page are listed for 2015–2025 (TrailFX) or 2015–2027 (Raptor Series), split into Regular Cab, SuperCab and SuperCrew part numbers. 2009–2014 and 2004–2008 trucks use their own parts. Pick your cab first, then the style: flat running board, nerf bar or hoop step.

TrailFX AL6006B A6 aluminum running boards for Ford F-150 SuperCrew

This guide groups the running boards, nerf bars and side steps we carry for the Ford F-150 by year and cab, using each product's own fitment list. Shop the full set on Ford F-150 Running Boards & Side Steps, or see all Ford F-150 parts.

Step 1: Know your year range and cab

Your F-150 What to look for in the listing
2015–2025 (13th and 14th gen) Most TrailFX parts list 2015–2025 F-150; most Raptor Series boards list 2015–2027. Some also list the 2022–2024/2025 F-150 Lightning.
2009–2014 (12th gen) Separate TrailFX nerf bars by cab; Raptor Series 1303-0085 and several Carr steps also list these years.
2004–2008 (11th gen) TrailFX 4-inch oval nerf bars by cab; Raptor Series 1303-0085 and Carr steps list 2004-and-newer.

Cab names: Regular Cab = "Standard Cab" (2 doors). SuperCab = "Extended Cab" (2 full front doors, 2 small rear doors). SuperCrew = "Crew Cab" (4 full doors). A board made for one cab will not fit another.

2015–2025 F-150 running boards by cab

Style Regular Cab SuperCab SuperCrew
TrailFX stationary steel board (listed 300 lb.) RBW13B RBW12B RBW11B, RBT004B
TrailFX titanium black aluminum (listed 250 lb.) RBA008TI RBA010TI RBA012TI
TrailFX A6 aluminum (listed 300 lb., est. 2-hour install) — AL6007B AL6006B
TrailFX Overland steel (ORB) — — ORB014
Raptor Series 5 in. oval 2003-0300BT 2003-0355BT 2003-0366BT
Raptor Series 5 in. OEM-style full tread — 2203-0355BT 2203-0366BT
Raptor Series 6 in. OEM-style — 1703-0355BT 1703-0366BT
Raptor Series Tread Step — 1903-0355BT 1903-0366BT
Raptor Series Sawtooth 2103-0300BT — —
Raptor Series Sport Step — — 2303-0366BT

Years from each listing's Fits list: TrailFX boards 2015–2025 F-150; Raptor Series boards 2015–2027 F-150 (1903-0366BT: 2015–2025). The Raptor Series SuperCrew boards and the TrailFX RBW11B, RBT004B, RBA012TI and ORB014 also list the F-150 Lightning. Each listing says no drilling is required and mounting hardware is included. Raptor Series listings on this page don't state a weight rating up top, so check the product page if that matters to you.

2015–2025 F-150 nerf bars by cab

All TrailFX nerf bars below list 2015–2025 F-150 (bed-step models 2015–2023), 300 lb., no drilling and mounting hardware included. Most come in black powder-coated steel (B) and polished stainless steel (S); the black part number is linked.

Tube Regular Cab SuperCab SuperCrew
3 in. round bent A0042B A0051B A0041B, A0052B
4 in. oval bent — A1004B A1005B
4 in. oval straight A1530B A1531B A1532B
4 in. trapezoidal straight — A4003B A4004B
5 in. oval straight A7040B A7041B A7042B
5 in. oval bent A7072B — —
5 in. oval with bed steps (2015–2023; drilling required) — A7050B A7051B
6 in. oval straight — — A8223B
A4 hexagonal aluminum — AL4011B AL4012B

Bed-step nerf bars run past the cab to give a step at the bed; the A7050B and A7051B listings say drilling is required. The SuperCrew bars also list the 2022–2024 F-150 Lightning.

2009–2014 F-150 (12th gen)

  • 3 in. round bent (drilling required): 1130301093 Regular Cab, 1130308093 SuperCab, 1130304093 SuperCrew (listing says the back of the mud flap must be trimmed to clear the brackets). Polished stainless versions end in 091.
  • 4 in. oval straight: A1525B SuperCab, A1523B SuperCrew (listings say they use factory body bolts for the brackets).
  • 5 in. oval straight: A7014B SuperCab, A7013B SuperCrew.
  • Stainless running boards: Raptor Series 1303-0085 lists 2004–2014 F-150 and 2010–2014 F-150 Raptor SuperCab, a 7 in. step and up to 400 lb. per side. The listing doesn't name a cab for non-Raptor trucks, so confirm your cab on the product page.

2004–2008 F-150 (11th gen)

  • 4 in. oval straight (no drilling): 2930313043 SuperCab, 2930314043 SuperCrew; polished stainless versions end in 041.
  • Raptor Series 1303-0085 also lists 2004-and-newer F-150s.

Hoop steps and side steps (Carr and ICI)

Hoop steps mount one step under each door instead of a full-length board. They work well on lifted trucks and work trucks. Carr lists these by year range rather than by cab:

  • 2015–2023 F-150: Carr HOOP II 108221, Super Hoop 128221, LD Step 118221 (wider, deeper step) and MAXgrip 138220-1 (galvanized steel, sold single, listed 500 lb.). Polished and safety-yellow versions are on the hoop steps page.
  • 1997–2014 F-150 (plus 2004 F-150 Heritage): Carr HOOP II 103991, Super Hoop 124031 and LD Step 114031.
  • 2022–2023 F-150 SuperCrew: ICI Alumilite dual drop side steps 840121412968 (aluminum, bolt-on hoop steps, brackets and hardware included).

Running board, nerf bar or hoop step?

  • Running boards give the widest step and the most rocker coverage: good for families and daily drivers.
  • Nerf bars are narrower tubes with step pads; bigger tubes (5–6 in.) give more step area.
  • Hoop / drop steps put the step lower, which helps on lifted trucks. See Drop Steps vs Running Boards for Lifted Trucks.

More detail: Running Boards vs Nerf Bars vs Hoop Steps. Super Duty owners: F-250/F-350 Running Boards Guide. Rear access: Hitch Step Guide. More F-150 upgrades: Ford F-150 Accessories Guide.

Shop by year and type

FAQ

Do running boards for a 2015 F-150 fit a 2025 F-150?

Many of the boards and nerf bars on our F-150 page list 2015–2025 (TrailFX) or 2015–2027 (Raptor Series) in their fitment, so one part covers both the 2015–2020 and 2021+ trucks. Always match your cab style too, and check the listing's Fits list for your exact year.

How do I know if my F-150 is a SuperCab or SuperCrew?

A SuperCrew (Crew Cab) has four full-size doors. A SuperCab (Extended Cab) has two full-size front doors and two smaller rear doors. A Regular Cab (Standard Cab) has two doors only. The Raptor Series listings describe the cabs exactly this way.

Do I have to drill to install F-150 running boards?

For the 2015-and-newer boards and nerf bars listed here, the listings say no drilling is required and mounting hardware is included. Some 2009–2014 TrailFX nerf bars (the 1130301/1130304/1130308 series) list drilling as required, so check the Install line on each listing.

How much weight do F-150 running boards hold?

Only use the rating the listing gives. TrailFX steel boards and nerf bars on this page list 300 lb., the TrailFX RBA aluminum boards list 250 lb., the Raptor Series 1303-0085 stainless boards list 400 lb. per side and the Carr MAXgrip step lists 500 lb.

What's the difference between running boards, nerf bars and hoop steps?

Running boards are wide, flat steps along the cab. Nerf bars are round, oval or shaped tubes with step pads. Hoop steps are single steps under each door. Our running boards vs nerf bars vs hoop steps article compares them in detail.

Ford f-150, Nerf bars, Running boards, Steps