





















Chevy Colorado Bed Drawers
A bed drawer system mounts on the floor of the truck bed and turns it into lockable, organized storage, while the top of the unit still works as a load floor. This page shows the 11 Weather Guard® Pack Rat® drawer units that Weather Guard® lists to fit the Chevy Colorado (2015 and newer).
Fitment notes for the Colorado
- Years: the 48 in. long steel units are listed for 2015 and newer Colorados (the 2015–2022 and 2023-and-newer generations), and the 42 in. aluminum 310-3-01 for 2022 and newer. The 60 and 72 in. Pack Rat® units are not listed for the Colorado.
- Beds: the 2015–2022 Colorado came with short and long beds; the 2023-and-newer Colorado has one short bed. Bed length is what decides which drawer length fits, so know your bed before you pick a unit.
- Width: units come 10.25, 20, 30 and 39.75–40 in. wide. Measure the floor between your wheel wells before choosing one of the wider units; narrower units can sit side by side.
How to choose
- Height: 9.5 in. tall units keep more room above the deck; 13 in. tall units have deeper drawers for larger tools.
- Steel or aluminum: the steel Pack Rat® units are rated for outdoor use, have a 425 lb drawer capacity and use the 1KEY ULTRALOCK. The 310-3-01 is a lighter aluminum interior unit (42 × 12.25 × 17.75 in., 225 lb drawer rating) with a power pass-through, and Weather Guard® rates it for indoor use.
- Finish: part numbers ending in -3 are white; -5 are black.
- Top load: top-load ratings vary by unit, so check the listing if you plan to stack cargo on top.
Shop all Chevy Colorado parts, all truck bed cargo slides and drawers or every cargo management product we carry. For more help, read Drawer tool box vs truck bed drawer system and our Chevy Colorado and GMC Canyon accessories guide.
Colorado Bed Drawer FAQ
How do I know which length fits my Colorado bed?
Measure the bed floor from the front wall to the closed tailgate and compare it with the unit's length. Each product page lists the years and bed lengths Weather Guard® lists for it. Always measure your truck to confirm fit.
Can I use a bed drawer with a tonneau cover or truck cap?
Often, yes, because the drawer sits on the bed floor. Check the unit's height against the clearance under your cover or cap before you buy; the 9.5 in. tall units leave more room.
Do the drawers lock?
The steel Pack Rat® units lock with the Weather Guard® 1KEY ULTRALOCK. The aluminum 310-3-01 uses a One-Touch latch.
