Description
At a Glance
- Fits: 2022-2026 Toyota Tundra, 5-6-Inch Lift
- Brand / Part #: ICON Vehicle Dynamics 58771
- Material: Aluminum / Steel
- Manufacturer warranty: 1 Year-Shock Absorbers; Limited Lifetime-Coil Springs
ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2022-2026 Toyota Tundra. These adjustable coilovers are specifically designed for use the ICON 6" Lift Performance Suspension System and allow up to 5-6” of front lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra.
ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
Specifications
- Adjustable Damping: NO
- Body Diameter: 2.5 IN
- Coil Over Springs Included: Yes
- Compressed Length: 20.23 IN
- Cylinder Color: Silver
- Cylinder Finish: Cadmium Plated
- Damping Type: Oil
- Extended Length: 26.08 IN
- Gas Charged: Yes
- Lower Mount Type: Eyelet
- Material: Aluminum, Steel
- Maximum Lift: 6 IN
- Minimum Lift: 5 IN
- OEM Wheels & Tires Fitment: No
- Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
- Reservoir Style: Remote
- Self-Leveling: No
- Shaft Diameter: 0.875 IN
- Shock Absorber Body End Measuring Point: Top of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center of Eylet
- Spring Rate Type: Linear
- Travel Length: 5.86 IN
- Upper Mount Type: Mounting Plate
- Valving Type: Digressive
Installation & Fitment Notes
- OEM Wheels & Tires Fitment: No
- Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
- APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights Indicated are for a stock equipped vehicle.
- APPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.
- APPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.
- APPLICATION NOTE #152: ICON Delta Joint Pro upper control arms required
- APPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
- APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
- APPLICATION NOTE #381: Requires minimum of 20" diameter wheels.
- APPLICATION NOTE #383: Requires additional components to complete system. DO NOT attempt install without part numbers 51010, 51011, 51012, 51014, and 51017.
- APPLICATION NOTE #405: Most Tundra sub-models equipped with i-Force gasoline engine will have front lift height range of 5-6" over stock.
- APPLICATION NOTE #406: Most Tundra sub-models equipped with i-Force MAX hybrid engine will have front lift height range of 4.5-5.5" over stock.
- APPLICATION NOTE #407: Tundra SR5 with TRD Sport package will have front lift height range of 6-7" over stock.
- APPLICATION NOTE #408: Tundra TRD Pro will have front lift height range of 3.25-4.25" over stock.
Fits:
- 2022-2026 Toyota Tundra, 5-6-Inch Lift
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Features
Features
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Specific length designed for use with ICON 6" Lift Performance Suspension System
- Adjustable ride height offers 5-6" of front lift over stock
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
Vehicle Fitment
Guaranteed Fit or Returns Are Free
Select your vehicle. If we show it as a Verified Fit and it doesn't fit your vehicle, we'll pay return shipping and waive the restocking fee. Details
Shipping & Returns
- Secure, encrypted checkout
- FREE SHIPPING on orders $300+ to the lower 48. Freight and oversize items excluded.
- Check fit for your vehicle →
- Fitment questions? Call (919) 283-6645 or email us
We've got your six.
- Arrives damaged or defective? We make it right.
- Genuine name-brand parts
- U.S.-based support from truck people
Full details: Shipping policy · Return & refund policy
Installation / Video
Watch It in Action
Official ICON Vehicle Dynamics video for this part or this vehicle application.


