Description
At a Glance
- Fits: 2022-2027 Toyota Tundra, 0-3-Inch Lift
- Brand / Part #: ICON Vehicle Dynamics K53192
- Manufacturer warranty: 1 Year-Shock Absorbers, Delta Joint Pros; Limited Lifetime-Control Arms, Sway Bar Drop Brackets; Excludes Wearable Items
The ICON Vehicle Dynamics Stage 2 complete suspension system for the 2022-2026 Toyota Tundra builds on ICON's 2.5 EXP Shock Kit with the addition of billet front upper control arms, providing proper alignment at any ride height, improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35" tires. This system features the innovative new 2.5 EXP series coilover shocks and sway bar drop kit for the front of the truck along with our proven 2.0 nitrogen charged monotube shock with internal reservoir for the rear.
Stage 2 includes a pair of 2.5 EXP Series coilovers for 2-3” of front lift, improved performance, and 35” tire fitment. Billet UCAs for alignment correction are included with 2.0 Series rear shocks to balance the tuning from front to rear.
Specifications
- Active or Passive Suspension: Passive
- Adjustable Compression: No
- Adjustable Control Arm: Yes
- Adjustable Damping: No
- Adjustable Rebound: No
- Front Reservoir Style: Internal
- Front Shock Body Diameter: 2.5 IN
- Maximum Lift Front: 3 IN
- Minimum Lift Front: 0 IN
- OEM Wheels & Tires Fitment: Yes
- Rear Reservoir Style: Internal
- Rear Shock Body Diameter: 2 IN
- Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
- Reservoir Style: Internal
Installation & Fitment Notes
- APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
- APPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift lange.
- APPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.
- APPLICATION NOTE #144: Not compatible with TRD Pro
- APPLICATION NOTE #149: For 4WD models without TRD Off-Road package ICON recommends using ICON Diff Drop (Part# 55156) or using Toyota TRD axles (Part# 434200C020 Driver / 434100C020 Pass). Failure to do so could result in front axle damage. Not required for TRD Pro.
- APPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles
- APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
- APPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required
- APPLICATION NOTE #375: Tundra SR5 equipped with TRD Sport packages will have lift height range of 1-4” over stock
- APPLICATION NOTE #415: Included rear shocks are compatible with 0-1.5" of rear lift over stock on models equipped with rear coil springs without TRD suspension package. Rear shocks are compatible with 0-1" of rear lift over stock on models equipped with rear coil springs with TRD suspension package and TRD Pro.
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
Fits:
- 2022-2027 Toyota Tundra, 0-3-Inch Lift
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Features
Features
- Vehicle specific design for 2022-2027 Toyota Tundra
- 2.5 EXP Series front shocks with internal reservoirs utilize factory coil and coil hardware
- Adjustable front ride heights from 0-3” of front lift over stock with the use of snap ring and included billet UCAs
- Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation
- Included sway bar drop brackets reduce bind in OE sway bar links
- Allows for full wheel travel without overstressing OE components
- 2.0 Aluminum Series rear shocks provide balanced tune with coilovers and increased performance
- All ICON shock absorbers are fully rebuildable and re-tunable
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
Vehicle Fitment
Guaranteed Fit or Returns Are Free
Select your vehicle. If we show it as a Verified Fit and it doesn't fit your vehicle, we'll pay return shipping and waive the restocking fee. Details
Shipping & Returns
- Secure, encrypted checkout
- FREE SHIPPING on orders $300+ to the lower 48. Freight and oversize items excluded.
- Check fit for your vehicle →
- Fitment questions? Call (919) 283-6645 or email us
We've got your six.
- Arrives damaged or defective? We make it right.
- Fitment verified for your vehicle
- U.S.-based support from truck people
Full details: Shipping policy · Return & refund policy
Installation / Video
Watch It in Action
Official ICON Vehicle Dynamics video for this part or this vehicle application.





