Features
- Rated Line Pull: 4,500 pounds for ATV and UTV recovery and utility applications
- Motor: 4.5-horsepower permanent-magnet motor
- Cable: 40-foot steel cable with a 13/64-inch diameter
- Fairlead: Roller fairlead for smooth cable alignment and reduced cable wear
- Gearing: Planetary drive system with approximately 169:1 gear reduction
- Brake: Electric drum brake for controlled load holding
- Operation: Wired remote with solenoid electrical control
- Voltage: 12-volt electrical system
- Mounting: Fixed vehicle mount with three mounting holes
- Included: Mounting hardware and wired remote
- Finish: Black
- Application: Recommended for ATV and UTV use
Watch It in Action
Official TrailFX video for this product line. Your exact size, model or finish may differ; check the details below.
Description
At a Glance
- Fits: Universal fit (not vehicle-specific)
- Brand / Part #: TrailFX W45B
The TrailFX W45B vehicle-mounted winch provides dependable pulling power for ATV and UTV recovery, utility, and off-road applications. With a rated line pull of 4,500 pounds, this fixed-mount winch uses a permanent-magnet motor and planetary gearing to deliver reliable performance in demanding conditions. The included 40-foot steel cable measures 13/64 inch in diameter and is guided by a roller fairlead for smooth cable handling and reduced wear.
An electric drum brake helps maintain load control, while the wired remote provides convenient operation from a safe position near the vehicle. The winch uses a solenoid electrical control system and operates on 12 volts, with a maximum draw of 227 amps at rated pulling capacity. Its gear reduction system supports controlled operation, and free spooling allows the cable to be pulled out efficiently before connecting to a recovery point.
Designed for straightforward installation, the TrailFX W45B includes mounting hardware and features a three-hole mounting configuration. The black finish complements a range of ATV and UTV setups while providing a durable appearance for regular trail and utility use. Verify vehicle fitment, mounting requirements, electrical capacity, and recovery equipment compatibility before installation and operation. This product carries a California Proposition 65 warning for cancer and reproductive harm; visit www.p65warnings.ca.gov for more information.
Specifications:
- Gear Reduction Ratio: 166:1
- Free Spooling: Yes
- Brake Type: Drum
- Line Diameter (In): 13/64 Inch
- Line Length (Ft): 40 Feet
- Line Material: Steel
- Fairlead Type: Roller
- Remote Type: Wired
- Mounting Hole Quantity: 3
- Includes Mounting Hardware: Yes
- Color: Black
- Recommended Use: ATV/ UTV
- Mount Type: Vehicle Mounted
- Motor Horsepower: 4.5 Horsepower
- Max Amp Draw/ Line Pull: 227 Amp Draw/ 4500 Pound
- Max Line Pull/ Line Speed: 4500 Pound/ 5 Feet Per minute
- Electrical Control Type: Solenoid
- Motor Type: Permanent Magnet
- Thermal Shutoff: No
- Drive Gear Type: Planetary
- Mounting Bolt Pattern Length: 4.9 in
- Type: Fixed Mount
- Solenoid Type: Yes
- Remote Included: Yes
- Rated Line Pull: 4500 lb
- Mounting Bolt Pattern Width: 3 in
- All Terrain Vehicle: Yes
- Gearing: Planetary
- Gear Ratio: 169:1
- Cable Material: Steel
- Cable Length: 40 ft
- Brake Activation: Electric
- Voltage: 12 2h
- Part Number: W45B
Fits:
- Universal fit (not vehicle-specific)
Specifications
| Type | Fixed Mount |
|---|---|
| Color | Black |
| California Prop 65 | WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |





