Quick answer: Most BD Diesel transmission parts we carry are for Ram 2500/3500 Cummins trucks: forged billet FleX-Plates (1041210 for the 1994–2007 5.9L, 1041221 for the 2007.5–2018 6.7L), 47RE/48RE valve body electronics for 2000–2007 trucks, deep sump pans (+2 qt or +4.5 qt), an Aisin AS69RC torque converter and filter kit for 2013+ Ram 3500–5500, plus a 6R140 PressureLoc for 2011–2019 Ford Super Duty. Fitment below is taken from each product listing; match your transmission, not just your truck.
Which transmission does your truck have?
BD Diesel lists these parts by transmission, so start there. The listings name these units:
| Transmission | Trucks named in the BD listings | BD parts we carry |
|---|---|---|
| 47RE / 48RE (and older 727, 518, 47RH) | Dodge Ram 2500/3500 with the 5.9L Cummins (1994–2007 range) | 1060602, 1060605, 1061501, 1041210 (flexplate) |
| 68RFE | 2007.5+ Ram 2500/3500 with the 6.7L Cummins | 1061525 (pan), 1041221 (flexplate, through 2018) |
| Aisin AS69RC | 2013+ Ram 3500, 4500, 5500 with the 6.7L Cummins | 1070280 (torque converter), 1064048 (filter kit) |
| 66RFE | 2012–2018 Ram 2500/3500 with the gas 5.7L or 6.4L HEMI | 1070200 (torque converter) |
| 545RFE | Ram 1500 4.7L/5.7L HEMI, Dakota, Durango, Grand Cherokee 4.7L | 1061525 (pan) |
| Ford 6R140 | 2011–2019 F-250 to F-550 Super Duty, 6.7L Power Stroke | 1030385 (PressureLoc) |
Not sure which unit is in your truck? Your original window sticker or build sheet lists the transmission, or send us your VIN.
Flexplates: BD FleX-Plate for 5.9L and 6.7L Cummins
The flexplate bolts the engine's crankshaft to the torque converter. BD's listings say the extra torque from modified 5.9L and 6.7L Cummins engines can crack or shatter the stock plate. From the listings, the BD FleX-Plate is:
- Forged billet with twice the material of the stock flexplate, precision-balanced
- Rated for over 2,000 lb-ft of torque, or up to 3,500 lb-ft with BD's Slip Eliminator friction shim kit
- SFI 29.3 approved; black oxide coated (BD says this avoids the hydrogen embrittlement caused by zinc plating)
- A direct bolt-in that fits any OEM or aftermarket torque converter, and still allows axial thrust (unlike a solid flywheel conversion)
| Part | Engine (from the listing) | Fits (from the listing) |
|---|---|---|
| BD 1041210 FleX-Plate | 5.9L Cummins: 1994–1998 12-valve, 1998.5–2002 24-valve, 2003–2004, 2004.5–2007 | 1994–2007 Dodge Ram 2500, 3500 |
| BD 1041221 FleX-Plate | 6.7L Cummins: 2007.5–2012, 2013–2018 | 2007–2010 Dodge Ram 2500, 3500; 2011–2018 Ram 2500, 3500 |
BD suggests replacing the flexplate along with a converter or transmission swap, since the transmission is already out for that job.
47RE / 48RE valve body electronics (2000–2007 Dodge Ram 5.9L Cummins)
On the 47RE and 48RE automatics, the factory governor pressure transducer is plastic. BD's listings describe it as prone to intermittent malfunction and replace it with a metal unit that handles higher line pressure.
| Part | What's included (per the listing) | Fits |
|---|---|---|
| BD 1060602 Pressure Transducer Upgrade | Metal transducer, electronic adapter to prevent over-pressure codes, built-in temperature sensor | 2000–2007 Dodge Ram 2500, 3500 (5.9L Cummins) |
| BD 1060605 Valve Body Electronics Upgrade | Everything in 1060602 plus a heavy duty Borg Warner governor pressure solenoid (BD: prevents oscillation and debris buildup, more flow) | 2000–2007 Dodge Ram 2500, 3500 (5.9L Cummins; 47RE/48RE) |
The difference: 1060602 replaces the transducer only, while 1060605 also replaces the governor pressure solenoid.
Deep sump transmission pans
BD's aluminum pans add fluid capacity, and the listings say the cooling fins help keep temperatures down and the stiffer pan prevents case twisting. Both include a magnetic drain plug and a temperature sending unit port.
| Part | Adds | Transmissions (from the listing) | Fits (from the listing) |
|---|---|---|---|
| BD 1061501 Deep Sump Pan | 2 qt | 727 / 518 / 47RE / 47RH / 48RE | 1994–2006 Dodge Ram 2500, 3500; 2004–2006 Dodge Ram 1500 |
| BD 1061525 Deep Sump Pan | 4.5 qt | 68RFE (6.7L Cummins) and 545RFE | 2008–2010 Dodge Ram 2500, 3500; 2011–2024 Ram 2500, 3500; 2002–2010 Dodge Ram 1500; 2011 Ram 1500; 2000–2004 Dakota; 2000–2003 Durango; 2000–2004 Jeep Grand Cherokee |
The 1061525 listing warns to check for interference with the exhaust crossover pipe, frame cross member or catalytic converter. Its text also names 2008–2016 for the 68RFE while its fit list runs through 2024, so confirm your year with us if you have a 2017 or newer truck.
Aisin AS69RC parts (2013+ Ram 3500, 4500, 5500)
These parts are for Ram 3500, 4500 and 5500 trucks equipped with the Aisin AS69RC six-speed automatic. Not every Ram 3500 has it (many use the 68RFE), so check your transmission first.
| Part | What it is (per the listing) | Fits |
|---|---|---|
| BD 1070280 ProForce Torque Converter | OEM-style multi-disc converter, remanufactured with new clutch fibers and steels (3 frictions, 3 steels) and a new sprag; for stock or mildly modified trucks | 2013–2018 Ram 3500, 4500, 5500 (6.7L Cummins) |
| BD 1064048 Transmission Filter Service Kit | Sump filter and pan gasket for the AS69RC | 2013–2024 Ram 3500, 4500, 5500 (6.7L Cummins) |
Gas Ram HD: 66RFE torque converter
BD 1070200 Torque Converter is for the 66RFE in 2012–2018 Ram 2500/3500 with the gas 5.7L or 6.4L HEMI, not the Cummins. Per the listing it is fully remanufactured with new seals, bearings, bushings and O-rings, uses thicker lockup friction material, includes OEM converter bolts and is meant for stock and mildly modified trucks.
Ford Super Duty: 6R140 PressureLoc
BD 1030385 6R140 Transmission Pressure Enhancer (PressureLoc) is a solenoid replacement for the 6R140 six-speed. BD states the stock unit varies line pressure between 70 and 170 psi, which can be too little for heavy towing or added horsepower. From the listing:
- Delivers up to 320 psi of apply pressure; BD quotes a 79% increase in clutch holding power
- Meant to prevent clutch slippage and shift flare
- No tuning required, and BD says it won't conflict with existing transmission tuning
- Fits 2011–2019 F-250, F-350, F-450 and F-550 Super Duty with the 6.7L Power Stroke
Before you order
- Transmission, then engine, then year: the same Ram 2500 was built with different transmissions and with gas or diesel engines.
- Doing a converter or rebuild? That's the usual time to add a flexplate, deep pan or fresh filter, since the work overlaps.
- Exhaust and frame clearance: deep pans hang lower; check the listing's clearance notes.
- Not sure? Send us your year, model, engine and VIN through our contact page.
Related guides and parts
- Shop all BD Diesel parts
- Truck performance parts
- Ram 2500 parts and Ram 3500 parts
- Ford F-250 Super Duty parts
- Diesel Exhaust Brakes Explained: BD Kits for Ram Cummins
- Diesel High Idle Kits and E-PAS Emergency Shut-Off
- Adjustable Track Bars for Ram HD, Super Duty and Jeep
- Ram 2500 and 3500 Accessories: Heavy Duty Upgrade Guide
FAQ
What does a BD FleX-Plate do?
It replaces the stock flexplate that connects the engine to the torque converter. BD Diesel says its forged billet FleX-Plate has twice the material of the stock part, handles over 2,000 lb-ft of torque (up to 3,500 lb-ft with BD's Slip Eliminator shim kit), meets SFI 29.3 and bolts in with any OEM or aftermarket torque converter. 1041210 fits 1994-2007 Dodge Ram 2500/3500 (5.9L Cummins); 1041221 fits 2007-2010 Dodge Ram and 2011-2018 Ram 2500/3500 (6.7L Cummins).
Which BD torque converter fits my Ram?
Per the listings: 1070280 ProForce is for the Aisin AS69RC transmission in 2013-2018 Ram 3500, 4500 and 5500 with the 6.7L Cummins. 1070200 is a remanufactured 66RFE converter for 2012-2018 Ram 2500/3500 with the gas 5.7L or 6.4L HEMI, not the Cummins. Both are described for stock or mildly modified trucks.
How much fluid does a BD deep sump transmission pan add?
BD Diesel lists 2 extra quarts for the 1061501 pan (727/518/47RE/47RH/48RE transmissions, 1994-2006 Dodge Ram 2500/3500 and 2004-2006 Ram 1500) and 4.5 extra quarts for the 1061525 pan (68RFE and 545RFE). Both are aluminum with cooling fins, a magnetic drain plug and a temperature sender port.
What does the BD 6R140 pressure enhancer do?
The 1030385 PressureLoc replaces a solenoid in the Ford 6R140 transmission to raise line pressure. BD states stock line pressure varies between 70 and 170 psi and the PressureLoc delivers up to 320 psi of apply pressure (a 79% increase in holding power) to prevent clutch slip and shift flare, with no tuning required. It fits 2011-2019 F-250 to F-550 Super Duty with the 6.7L Power Stroke.
Do the BD 47RE/48RE transducer upgrades fit my truck?
1060602 (transducer upgrade) and 1060605 (transducer plus heavy duty Borg Warner governor pressure solenoid) are listed for 2000-2007 Dodge Ram 2500/3500 with the 5.9L Cummins and the 47RE/48RE automatic. Both replace the plastic factory transducer with a metal unit and include an adapter that BD says prevents over-pressure codes.

