Last Updated: November 20, 2026
How a Diesel Exhaust Brake Works
A diesel engine slows the truck only a little when you lift off the throttle, because it has no throttle plate restricting the intake like a gas engine does. An exhaust brake adds that restriction on the exhaust side. When it is switched on and you lift off the throttle, a valve in the exhaust pipe closes most of the way. The engine now has to push its exhaust against that back pressure on every exhaust stroke, and that work slows the truck through the drivetrain.
The result is less heat and wear on your service brakes on long grades, and more control when you are pulling a trailer or carrying a heavy load downhill. You still use your brakes to stop.
Exhaust Brake vs Engine Brake (Jake Brake)
| Exhaust brake | Compression-release engine brake (often called a Jake brake) | |
|---|---|---|
| How it works | A valve restricts the exhaust pipe and builds back pressure | Opens the engine's exhaust valves near the top of the compression stroke so the compressed air's energy is released instead of pushing the piston back down |
| Where you see it | Diesel pickups, built in from the factory on many late-model trucks or added as an aftermarket inline brake | Mostly heavy trucks and semis |
| Install | In the exhaust system, outside the engine | Inside the engine's valve train |
Many late-model diesel pickups have a factory exhaust brake mode that you turn on with a dash button; check your owner's manual for how yours works. The BD brakes below are separate inline valves, and BD says they keep the use of the factory (OEM) dash button.
BD Diesel Exhaust Brakes by Truck
All three are BD Diesel electronic exhaust brakes for the 6.7L Cummins. Per BD's listings they work without an air compressor or air lines, install inline in the existing exhaust, use cast iron construction, use BD's Variable Orifice Technology to regulate back pressure through the RPM range, and are rated for up to 150 retarding horsepower.
| Truck | Engine (per listing) | BD exhaust brake |
|---|---|---|
| 2007-2010 Dodge Ram 2500/3500, 2011-2012 Ram 2500/3500 | 6.7L Cummins (2007.5-2012) | 1027346 (remote mount, 4 in.) or 1027347 (remote mount, 5 in.) |
| 2013-2024 Ram 2500/3500 | 6.7L Cummins (2013-2018 and 2019-up) | 1027349 (remote mount, 5 in.) |
4 in. or 5 in.? The 2007.5-2012 brake comes in two sizes. Measure the exhaust pipe where the brake will go (or check your exhaust kit's spec) and pick the size that matches. If you are not sure, contact us with your VIN and exhaust setup before ordering.
Optional: Push/Pull Switch for Manual Transmissions
The BD 1300210 push/pull switch kit mounts on a manual transmission shift lever (5/8 in. levers) so you can turn the exhaust brake, or another accessory such as a light bar or air horn, on and off without taking your hand off the shifter. Its listing covers manual-transmission Dodge/Ram 2500/3500 and 1999-2007 Ford Super Duty trucks with the 5.9L Cummins, 7.3L Power Stroke or 6.0L Power Stroke; check the full fit list.
Using an Exhaust Brake on a Downgrade
- Turn the exhaust brake on before the grade, not halfway down it.
- Pick a gear that keeps your speed in check without riding the brakes. Your owner's manual and transmission tow/haul mode settings explain how your truck shifts with the exhaust brake on.
- Use your service brakes to stop and for any extra slowing you need. The exhaust brake helps; it does not stop the truck by itself.
- When towing, your trailer still needs working trailer brakes and a brake controller where required. See our trailer brake controller guide.
Other BD Diesel Parts for Towing Trucks
Towing puts heat and load into the transmission and front end too. BD Diesel also makes transmission parts (torque converters, flexplates, deep sump pans, transmission electronics), adjustable track bars and a steering box stabilizer for Ram 2500/3500, and high idle controls for Ford Super Duty diesels. The BD Diesel collection lists every part we carry by truck. If your Ram wanders or shakes after a lift or under load, read Death Wobble: What Causes It and How to Fix It and our steering stabilizer guide.
Shop towing parts, or see the work truck upfit checklist if you are setting up a truck for hauling.
Frequently Asked Questions
What does an exhaust brake do on a diesel truck?
It restricts the exhaust with a valve when you are off the throttle, building back pressure that makes the engine help slow the truck. That reduces how hard you have to use your service brakes on long downgrades, especially when towing or hauling.
Is an exhaust brake the same as a Jake brake?
No. An exhaust brake restricts the exhaust pipe. A compression-release engine brake, often called a Jake brake, opens the engine's exhaust valves near the top of the compression stroke. Compression-release brakes are mostly found on heavy trucks; pickups typically use exhaust brakes.
Which BD exhaust brake fits my Ram 2500 or 3500?
For 2007.5-2012 6.7L Cummins Ram 2500/3500 trucks, BD 1027346 (4 in.) or 1027347 (5 in.), matched to your exhaust pipe size. For 2013-2024 6.7L Cummins Ram 2500/3500 trucks, BD 1027349 (5 in.). Check the full fit list on the product page.
Does an exhaust brake replace my trailer brakes?
No. It helps slow the truck, but your truck still needs its service brakes to stop, and a trailer still needs its own brakes and a brake controller where required.


