REDARC Tow-Pro Liberty electric trailer brake controller

Quick answer: A trailer brake controller is the box in your truck that sends power to the electric (or electric-over-hydraulic) brakes on your trailer when you brake. If your trailer has electric brakes and your truck doesn't have a factory integrated brake controller, you need one. We carry the REDARC EBRH-ACCNA Tow-Pro® Liberty, a proportional, inertia-sensing controller, plus REDARC's vehicle harnesses, adapters and switch mounts. Pick the harness by your vehicle make below, or use the TPH-025 universal pigtail harness.

REDARC Tow-Pro Liberty electric trailer brake controller

What does a trailer brake controller do?

Electric trailer brakes don't work on their own. When you press the brake pedal, the brake controller sends a signal through the brake wire in your 7-way connector to the magnets in the trailer's brakes. Without a controller, the trailer's brakes do nothing and the truck has to stop the whole load. That's also why trailers with electric brakes use a 7-way plug: a 4-pin flat plug has no brake wire. See 4-way vs 7-way trailer wiring for the pinout.

Rules on when a trailer must have brakes vary by state and trailer weight, so check your state's requirements for your trailer.

Proportional vs time-delayed brake controllers

Proportional (inertia-sensing) Time-delayed
How it decides braking power Senses how hard the truck is slowing down and applies the trailer brakes to match Ramps up to a preset power level over a set time after you touch the brake pedal
How it feels Smooth; light stops get light trailer braking, hard stops get hard braking Can feel like the trailer pushes or tugs if the setting doesn't match the stop
Where you'll see it Most newer aftermarket controllers, including the REDARC Tow-Pro® Liberty Basic, lower-cost controllers

The Tow-Pro® Liberty listing describes it as a proportional brake controller that "measures the vehicle braking force and applies the trailer brakes to match," for smooth braking with no push or pull on the vehicle.

REDARC Tow-Pro® Liberty: what the listing says

  • Proportional, inertia sensing: uses a 3-axis accelerometer, so the main unit can be mounted in any position or orientation, out of the way of your knees.
  • Remote head on the dash: a small dash-mounted remote head includes a manual override, so you can apply the trailer brakes by hand, for example to help control trailer sway.
  • Self-calibrating: the listing says it self-calibrates for setup.
  • 12-volt systems, and works with both electric and electric-over-hydraulic trailer brakes.
  • Wiring: REDARC recommends installing it with the universal pigtail harness or one of its vehicle-specific harnesses and switch inserts.
  • Designed, made and tested in Australia, per the listing.

Which Tow-Pro® harness fits my vehicle?

Many trucks and SUVs with a factory tow package have a brake controller plug behind the dash. A REDARC vehicle harness plugs into that factory connector on one end and into the Tow-Pro® on the other, so there's no splicing. Each harness listing names the makes and models below; the "Features" line on every harness lists the Tow-Pro® Elite and Tow-Pro® Liberty. Confirm your exact year and model with the vehicle selector on the listing, or contact us before ordering.

Make Harness Models named in the listing
Chevrolet, GMC, Cadillac TPH-010 GMC, Cadillac and Chevrolet factory towing package connector behind the dash (listing says it comes in configurations for a large variety of models)
Buick, GMC, Chevrolet, Saturn TPH-012 Saturn, GMC, Chevrolet and Buick vehicles
Dodge / Ram TPH-020 Dodge Ram factory towing package connector behind the dash
Toyota TPH-015 Toyota Tundra, Tacoma and Tacoma Ltd
Toyota TPH-021 2014–2019 Toyota 4Runner
Nissan, Infiniti TPH-014 Nissan and Infiniti vehicles
Jeep TPH-001 2014–2020 Jeep Cherokee
Jeep, Dodge, Chrysler TPH-004 Jeep Grand Cherokee, Dodge Durango, Chrysler Pacifica
Honda, Acura TPH-013 Honda Pilot, Honda Ridgeline, Acura MDX

Ford owners: we don't carry a Ford-specific Tow-Pro® harness. The TPH-025 universal pigtail is REDARC's universal option for connecting the Tow-Pro® Liberty in a wide range of vehicles. Contact us with your year, model and tow package and we'll help you confirm the wiring.

Replacing another brand's controller?

If your truck already has wiring from a previous controller, REDARC's adapters let the Tow-Pro® plug into it:

  • TPH-017 for an existing Tekonsha-style brake controller harness.
  • TPH-019 for an existing CURT-style brake controller harness.

Mounting the remote head and main unit

  • TPSI-001 universal switch mount: creates an OE-style mount for the Tow-Pro® remote head; the listing says it meets FMVSS 201 and UNECE R21 when installed correctly.
  • TPSI-011: switch insert panel for 2019 and newer Toyota vehicles (listing names the Tow-Pro® Elite and Liberty); replaces a switch blank in the front console.
  • TPSI-007: switch insert panel for Toyota Tundra, FJ Cruiser, Tacoma, 4Runner and Highlander (listing written for the Tow-Pro® Elite).
  • TPSI-002: switch insert panels for a range of Toyota and Mitsubishi vehicles.
  • EBMK-001 mounting kit: a bendable bracket for mounting the main unit under the dash (listing written for the Tow-Pro® Elite main unit, so ask us to confirm it for the Liberty).

Basic setup tips

  • Follow REDARC's instructions that come with the controller and harness.
  • Test the trailer brakes in an empty lot at low speed before your first trip, and again whenever the load changes a lot.
  • Practice the manual override so you can reach it without looking.
  • Check the 7-way plug and the trailer's brake wiring before every trip, and don't forget the trailer's breakaway system, which is separate from the brake controller.

Frequently asked questions

Do I need a brake controller if my trailer has electric brakes?

Yes. Electric trailer brakes need a brake controller in the tow vehicle to work, unless your truck already has a factory integrated trailer brake controller.

What is the difference between a proportional and a time-delayed brake controller?

A proportional controller senses how hard the truck is slowing and matches the trailer's braking to it. A time-delayed controller ramps up to a preset power level over a set time after you brake. The REDARC Tow-Pro® Liberty is proportional.

Does the Tow-Pro® Liberty work with electric-over-hydraulic brakes?

The listing says it's compatible with both electric and electric-over-hydraulic brakes.

Which harness do I need for a Tow-Pro® Liberty?

Use the REDARC vehicle harness for your make if one is listed (table above), an adapter if you're replacing a Tekonsha-style or CURT-style controller, or the TPH-025 universal pigtail. Confirm the fit with the vehicle selector or contact us.

Can I mount the Tow-Pro® Liberty anywhere?

The main unit uses a 3-axis accelerometer, so the listing says it can be installed in any position or orientation. The small remote head goes on the dash where you can reach it.

Related guides and gear

4-way vs 7-way trailer wiring · Trailer breakaway systems explained · Trailer hitch classes explained · Flat towing setup guide

Shop all REDARC, trailer parts and wiring and towing.