This checklist walks through each part of a work truck upfit, what to think about before buying, and where to find the parts and our deeper guides. Every part has its own fit list, so check your year, cab, bed length and trim on the product page, or send us your VIN.
1. Lockable tool storage
A toolbox is usually the first upfit. The main styles:
- Crossover (saddle) toolboxes sit across the bed rails behind the cab and leave the bed floor open. Guide: Crossover Truck Tool Box Guide and UWS vs Weather Guard® Crossover Tool Boxes.
- Side mount toolboxes (lo-side and hi-side) run along the bed rails and open from the side. Guide: Side Mount Truck Tool Box Guide.
- Chest toolboxes sit on the bed floor and can fit under some tonneau covers. Guide: Chest Tool Box Guide.
- Underbody toolboxes mount under flatbeds and service bodies. Guide: Weather Guard® Underbody Tool Box Guide.
Brands we carry for work truck storage include Weather Guard®, UWS and BETTER BUILT®. For a side-by-side of Weather Guard® box styles, see the Weather Guard® Truck Tool Box Guide.
2. In-bed drawers
Drawer units keep tools organized and locked while leaving the top of the unit as a flat load floor. Weather Guard® Pack Rat® drawer units come in 48 in. long sizes, listed by width, for example:
- Weather Guard® 305-3-04: 48 in. x 10.25 in. x 9.5 in.
- Weather Guard® 306-3-04: 48 in. x 20 in. x 9.5 in.
- Weather Guard® 307-3-04: 48 in. x 30 in. x 9.5 in.
- Weather Guard® 308-3-04: 48 in. x 39.75 in. x 9.5 in.
Measure the space between your wheel wells and the bed length you have left after any toolbox before choosing a width. All drawer units and other bed organizers are in Cargo Management.
3. Racks for ladders, pipe and lumber
- Ladder racks carry ladders and long material above the bed. Guide: Truck Ladder Racks: How to Choose, Install and Load Safely.
- Headache racks protect the rear window and cab from shifting loads. Guide: Do You Need a Headache Rack?
- Truck racks cover other bed-mounted rack systems.
If you also want a toolbox, check that the rack and box are listed as working together before you order.
4. Fuel on the job
Crews running diesel equipment often add an in-bed transfer tank. See Transfer & Fuel Tanks, the Transfer Tank Buying Guide (size, shape and material) and Titan Fuel Tanks for replacement and auxiliary tanks.
5. A bed cover and a toolbox together
Most tonneau covers are not built to work with a toolbox. If you want both, start with Tonneau Covers That Fit With a Toolbox and read Tonneau Cover With a Toolbox: Can You Have Both?
6. Bed and cab protection
- Bed liners and bed mats protect the bed floor from tools and material. Guide: Truck Bed Mat vs Bed Liner.
- Floor mats and floor liners keep mud and job-site dirt off the cab carpet. Most are from Husky Liners and are made for a specific year and cab.
7. Getting in and out
Running boards help when crews climb in and out all day. Raptor Series HD WorkStep boards are listed for trucks such as the Ford Super Duty (2486-0301BT), Ram Crew Cab (2486-0201BT) and Chevy Silverado / GMC Sierra (2486-0101BT); check each fit list for cab and years. Shop all running boards. For reaching into the bed from the back, a receiver hitch step helps: see the Hitch Step Guide and truck steps.
8. Towing equipment and trailers
- Receiver hitches and ball mounts, hitch balls and pins. Guide: Trailer Hitch Classes Explained.
- Fifth wheel and gooseneck hitches for equipment trailers.
- Everything else for towing is in Towing.
Never exceed the lowest rating among your truck, hitch, ball mount and ball.
9. Work lighting
- Scene and flood lights light up a job site or the area around the truck, for example the RIGID Industries 86610 1x2 65-degree scene light.
- Truck bed cargo lights help when loading and unloading after dark.
- Rear-facing light bars such as the RIGID Industries 901802 28-inch chase light bar add rear lighting modes. Rules on flashing and colored lights vary by state and by vehicle use, so check what applies to your truck before using those modes on the road.
Shop all lighting and LED light bars.
10. Front-end protection
Trucks that work on ranches, rural roads or job sites often add a grille guard. Cattleman HD and TrailFX guards are in Grille Guards. Many guards affect front sensors and cameras, so read each fit note. Guide: Bull Bar vs Grille Guard.
11. A basic safety kit
- A mounted fire extinguisher: Best Fire Extinguisher for a Truck and fire extinguishers.
- A jump starter sized for your engine: How to Choose a Jump Starter for a Truck.
- Straps and shackles for getting unstuck: recovery gear.
12. Work vans
For cargo vans, see van shelving and storage (Weather Guard® shelving, dividers, mounting rails and bulkheads) and van racks. Shelving and racks are listed by van model, wheelbase and roof height, so have those ready.
Upfitting more than one vehicle?
Send us the year, make, model, trim and bed length (or van wheelbase and roof height) for each vehicle and the parts you want, and we'll check fitment and reply with a written quote. Details are on Fleet & Work Truck Orders.
FAQ
What are the most useful accessories for a work truck?
For most trades: a lockable toolbox or bed drawers, a ladder or headache rack, a bed liner or mat, floor liners, a receiver hitch, work lighting and a fire extinguisher. Add a transfer tank if you fuel equipment on site.
Can I use a toolbox and a tonneau cover at the same time?
Usually not with a standard cover and a crossover box. Some covers are made to work with a toolbox, and some chest boxes fit under a cover. See Tonneau Cover With a Toolbox.
Crossover toolbox or bed drawers?
A crossover box keeps the bed floor open and puts tools within reach from the side of the truck. Bed drawers keep tools organized at bed-floor level and leave a flat surface on top, but they use bed floor space. Some crews use both.
Do you help with fleet orders?
Yes. Send the vehicles and parts to us and we'll check fitment for each one before quoting. See Fleet & Work Truck Orders.

