BD Diesel 1032018 adjustable track bar kit for 2014-2025 Ram 2500 and 2013-2025 Ram 3500
Quick answer: A track bar keeps a solid front axle centered under the truck. When you level or lift a 4WD Ram 2500/3500, Ford Super Duty or Jeep Wrangler/Gladiator, the factory bar's angle changes and the axle shifts to one side, which can show up as an off-center steering wheel, wander or a loose front end. An adjustable track bar lets you re-center the axle. Find your truck in the tables below; every bar listed here is in our suspension components collection.

BD Diesel 1032018 adjustable track bar kit for 2014-2025 Ram 2500 and 2013-2025 Ram 3500

This guide explains what a track bar does, when an adjustable one is worth it, and which adjustable track bars, rebuild kits and brackets we carry for each truck, with the lift ranges and notes from each listing.

What a track bar does

On a truck or Jeep with a solid front axle and coil springs, the springs hold the weight but do not stop the axle from moving side to side. The track bar (also called a panhard bar) runs from a frame bracket on one side to the axle on the other side and holds the axle in place. Because the bar pivots in an arc, its length only centers the axle at one ride height. Raise the truck with a leveling kit or lift and the bar sits at a steeper angle, which pulls the axle toward one side.

A fixed-length factory bar cannot correct that. An adjustable bar can be lengthened or shortened to center the axle again. Many adjustable bars, including the BD, ReadyLift and MaxTrac bars below, can be adjusted while installed on the truck.

Signs your track bar needs attention

  • The front axle or tires sit visibly off-center in the wheel wells after a level or lift.
  • The steering wheel is off-center or the truck wanders on the highway.
  • Clunking, or a loose, delayed feel when you turn the wheel side to side.
  • Death wobble on a solid-axle truck or Jeep. A worn track bar joint or bushing is one of the first things to check; see Death Wobble: Causes and Fixes.

Ram 2500 and 3500 (4WD)

Part Fits (listing) Notes from the listing
BD Diesel 1032018 adjustable track bar kit 2014–2025 Ram 2500, 2013–2025 Ram 3500, 4WD; gas and diesel For lifts up to 4 in. (more with a drop bracket); adjusts on the truck; forged components, black Cerakote finish, polyurethane bushings
BD Diesel 1302038 bushing kit 2014–2024 Ram 2500, 2013–2024 Ram 3500 Replacement poly bushing set for the BD 1032018 bar
MaxTrac 992800 front adjustable track bar Title: 2014–2027 Ram 2500, 2013–2027 Ram 3500 (the listing's fit summary says 2022–2027) Forged steel, black paint. Because the two fit ranges on the listing differ, contact us to confirm fit on a 2013–2021 truck
BD Diesel 1032013F adjustable track bar kit 2003–2013 Ram 2500, 2003–2012 Ram 3500 (per the listing's fitment) For lifts up to 4 in. (more with a drop bracket); adjusts on the truck; black Cerakote; poly bushings (replacement set p/n 1302033-1)
ReadyLift 77-1509 heavy duty adjustable track bar 2009–2010 Dodge Ram 2500, 2011–2013 Ram 2500/3500, 4WD Solid steel bar (stock bar is 1.25 in.); stock or lifted up to 6 in.; 7/8-14 threaded rod end and Clevite rubber bushing; ReadyLift notes it is not for the newer radius arm design trucks

More for these trucks: Ram 2500 and 3500 lift and leveling kit guide and the BD Diesel 1032003 steering box stabilizer bar.

Ford F-250 and F-350 Super Duty (4WD)

Part Fits (listing) Notes from the listing
ReadyLift 77-2006 adjustable front track bar 2017–2027 F-250/F-350 Super Duty 4WD with 0–5 in. of front lift (not F-450) 1.5 in. DOM steel tube, 3/8 in. wall, 4140 chromoly ends; twin-pinch adjuster for on-truck adjustment; Moog ball joint on the axle end. Trucks with 6–8 in. of lift use it with a relocation bracket
MaxTrac 993300 front adjustable track bar Title: 2017–2027 F-250/F-350 Super Duty (the listing's fit summary says 2022–2025) Forged steel, black powder coat. Because the two fit ranges on the listing differ, contact us to confirm fit
BD Diesel 1032110 adjustable track bar kit 2005–2016 F-250/F-350 Super Duty; 2005–2026 F-450/F-550 Super Duty (per the listing's fitment) For lifts up to 6 in. on Ford; adjusts on the truck; black Cerakote; poly bushings (replacement set p/n 1303104)
ReadyLift 67-2538 track bar relocation bracket 2008–2027 F-250/F-350 Super Duty 4WD, 2011–2016 F-450 OEM-style cast iron bracket that lowers the track bar mount to correct steering geometry on leveled or lifted trucks with steering or tracking issues; listed as requiring professional installation

More for these trucks: Ford Super Duty lift and leveling kit guide.

Jeep Wrangler and Gladiator

Part Fits (listing) Notes from the listing
ReadyLift 77-6004 heavy duty adjustable front track bar 2018–2026 Jeep Wrangler JL, 2020–2026 Jeep Gladiator JT Heavy-duty adjustable end with welded bungs; adjusts on the vehicle; stock or lifted Jeeps
ReadyLift 77-6001 adjustable front track bar 2007–2018 Jeep Wrangler JK Adjustable joint, adjusts on the vehicle; stock or lifted JKs; made in USA
MaxTrac 999700 front adjustable track bar 2007–2018 Jeep Wrangler JK Forged steel, black powder coat
JKS JKS7201 HD track bar rebuild kit 2007–2018 Jeep Wrangler JK Service parts for the JKS OGS120 heavy-duty adjustable track bar only; check that your Jeep has that bar before ordering

More for Jeeps: Jeep Wrangler lift kit guide, Jeep Gladiator lift kit guide and Steering stabilizers: single vs dual.

Rear adjustable track bars

Some trucks also use a rear track bar. We carry the Fabtech FTS26113 rear adjustable track bar, which Fabtech says lets you re-center the axle for better on-highway tracking; its fitment is vehicle-specific, so check the fitment table on the listing or contact us before ordering.

Adjustable bar, bracket or bushings: which do you need?

  1. Stock height, worn parts: replace the worn joint or bushings (for example the BD 1302038 set for the BD Ram bar or the JKS7201 kit for a JKS bar) or the whole bar.
  2. Leveled or mildly lifted: an adjustable bar rated for your lift height re-centers the axle. Check the lift range on the listing (up to 4 in. for the BD Ram kits, 0–5 in. for the ReadyLift 77-2006 Super Duty bar, up to 6 in. for the ReadyLift 77-1509 and the BD Ford kit).
  3. Taller lifts: pair the bar with a drop or relocation bracket so the bar angle stays closer to factory. Some lift kits include one (the ReadyLift 49-23621 6 in. Super Duty kit, for example, lists a front track bar relocation bracket), so check your kit's parts list first.
  4. Plan on an alignment after any track bar change: Do I Need an Alignment After a Leveling Kit?

Not sure which bar fits your truck? Contact us with your year, model, drive and lift height and we'll help you confirm it.

Shop

FAQ

What does a track bar do on a truck?

A track bar (also called a panhard bar) runs from the frame to the solid front axle and keeps the axle centered side to side under the truck. Trucks and Jeeps with a solid front axle and coil springs, such as the 4WD Ram 2500/3500, 4WD Ford F-250/F-350 Super Duty and Jeep Wrangler and Gladiator, use one.

Do I need an adjustable track bar after a leveling kit or lift?

Often, yes. Because the bar swings in an arc, raising the truck changes its angle and pulls the axle toward one side; ReadyLift's listing says the axle of a lifted straight-axle truck tends to shift toward the driver's side. An adjustable bar lets you set the length so the axle is centered again. Each listing states the lift range it is made for, for example up to 4 in. for the BD Ram kits and 0–5 in. for the ReadyLift 77-2006 Super Duty bar.

Can a worn track bar cause death wobble?

A loose or worn track bar joint or bushing is one of the common things checked when a solid-axle truck or Jeep has death wobble, and BD says its adjustable bars help eliminate death wobble in lifted trucks. Death wobble can have more than one cause, so inspect the whole front end; see our death wobble guide.

What is a track bar relocation (drop) bracket?

A drop bracket lowers the frame-side or axle-side mount so the bar sits closer to its factory angle on a lifted truck. The ReadyLift 67-2538 bracket for 2008–2027 Super Duty 4WD trucks is one example; ReadyLift says it corrects steering geometry on leveled or lifted trucks with steering or tracking issues. BD notes its bars can handle more lift when paired with a drop bracket.

Do I need an alignment after installing a track bar?

Plan on one. Changing the track bar length moves the axle side to side, so have the axle centered and the alignment checked after install. ReadyLift lists about 2 hours of install time for its bars and marks the 67-2538 bracket as a job that requires professional installation.

Bd diesel, Ford super duty, Jeep gladiator, Jeep wrangler, Maxtrac, Ram 2500, Ram 3500, Readylift, Suspension, Track bars