ICON K53191 Stage 1 2.5 EXP suspension system for 2022-2027 Toyota Tundra
Quick answer: ICON stage numbers are a ladder, not a standard. Each step adds parts to the one below it, but what Stage 2 adds on a Tacoma is different from what it adds on a Tundra or 4Runner. In general, Stage 1 is front coilovers plus matched rear shocks, the middle stages add rear springs or upper control arms, and the top stages move to extended-travel or remote reservoir shocks. Find your truck below and compare the kits side by side. Every kit here is in our ICON Vehicle Dynamics collection.

ICON K53191 Stage 1 2.5 EXP suspension system for 2022-2027 Toyota Tundra

ICON Vehicle Dynamics sells its suspension as complete "stage" systems. This guide lists every ICON stage kit we carry for the Toyota Tacoma, Tundra, 4Runner and FJ Cruiser and the Ford Bronco, with what each stage adds and the lift and tire numbers from each listing.

Two words to know first

  • EXP vs 2.5 Series coilovers. EXP kits use ICON 2.5 EXP shocks that keep your factory front coil spring; you set ride height with snap rings. The other kits use ICON's threaded-body 2.5 Series coilovers with ICON coil springs. More on that trade-off: Coilover vs Shock and Spring.
  • Billet vs tubular upper control arms (UCAs). Higher stages add ICON upper control arms with the Delta Joint. ICON's billet aluminum arms add on-vehicle caster and camber adjustment; the tubular arms have alignment correction built in. Some kits come in both versions (a "T" at the end of the part number means tubular).

2022 and newer Toyota Tundra: Stage 1 to 5

All Tundra stage kits include front sway bar drop brackets and ICON 2.0 Aluminum Series rear shocks, and list 35 x 12.50 in. as the recommended tire size (minor trimming may be needed).

Kit Front Upper control arms Rear shocks Front lift (listing)
Stage 1 EXP (K53191) 2.5 EXP coilovers (reuse factory springs) Stock 2.0 internal reservoir 0–2.25 in.
Stage 2 EXP billet (K53192) / tubular (K53192T) 2.5 EXP coilovers Billet or tubular, Delta Joint PRO 2.0 internal reservoir 0–3 in. billet / 2–3 in. tubular
Stage 3 (K53193) 2.5 Series threaded coilovers with ICON springs Stock 2.0 internal reservoir 1.25–2.25 in.
Stage 4 billet (K53194) / tubular (K53194T) 2.5 Series threaded coilovers Billet or tubular, Delta Joint PRO 2.0 internal reservoir 1.25–3.5 in. billet / 2–3.5 in. tubular
Stage 5 billet (K53195) / tubular (K53195T) 2.5 Series threaded coilovers Billet or tubular 2.0 remote reservoir 1.25–3.5 in. billet / 2–3.5 in. tubular

So on the Tundra, Stages 1–2 are the EXP family (factory springs), Stages 3–5 are the threaded-coilover family, and Stage 5 is Stage 4 with remote reservoir rear shocks for more heat capacity. Notes from the listings: the included rear shocks are rated for 0–1.5 in. of rear lift on coil-spring trucks without the TRD suspension package and 0–1 in. with it; the Stage 2 and Stage 4 listings say they are not compatible with the load-leveling rear air suspension; the Stage 2 EXP listing says it is not compatible with TRD Pro; and an SR5 with the TRD Sport package gets a different lift range (see the notes on each listing). Rear lift parts like the ICON 51211 rear coil springs are sold separately; see the Toyota Tundra lift and leveling kit guide for the supporting parts (diff drop, skid plate spacer).

2024–2026 Toyota Tacoma 4WD: Stage 1 and Stage 2

All four kits use ICON 2.5 Series internal reservoir front coilovers with 1.25–3 in. of front lift, a front differential drop, and 2.0 Aluminum Series internal reservoir rear shocks. The recommended tire size is 33 x 11.50 in.

Kit Adds Rear springs
Stage 1 (K53291) Coilovers, diff drop, rear shocks Factory (rear shocks listed for 0–1 in. of rear lift on most Tacoma submodels)
Stage 2 tubular (K53292T) Stage 1 + tubular UCAs with Delta Joint PRO Factory
Stage 2 tubular + springs (K53292TS) Stage 2 + ICON triple-rate rear coil springs 0.5 in. of rear lift
Stage 2 tubular + Overland springs (K53292TX) Stage 2 + ICON dual-rate Overland rear coil springs 0.5 in. of rear lift with about 600 lb of extra weight in the rear

Pick the TS kit for a mostly stock-weight truck and the TX kit if you carry a lot of weight in the bed or run a heavy overland build. The Toyota Tacoma lift and leveling kit guide lists the separate coilovers, arms and springs if you would rather build your own.

2005–2023 Toyota Tacoma: 2.5 Series Stage 1 to 4

These kits use ICON 2.5 Series front coilovers with ICON coil springs, adjustable for 0–3.5 in. of front lift on 2005–2015 trucks and 0–2.75 in. on 2016–2023 trucks. The recommended tire size is 33 x 11.50 in.

Kit Front coilovers Upper control arms Rear
Stage 1 (K53001) 2.5 Series, internal reservoir Stock 2.0 Aluminum Series rear shocks (rated for 0–2 in. of rear lift)
Stage 2 (K53002) 2.5 Series, internal reservoir Stock Add-a-leaf (1.5 in. of rear lift) + 2.0 remote reservoir shocks
Stage 3 billet (K53003) / tubular (K53003T) 2.5 Extended Travel, internal reservoir Billet or tubular, Delta Joint Add-a-leaf + 2.0 remote reservoir shocks
Stage 4 billet (K53004) / tubular (K53004T) 2.5 Extended Travel, remote reservoir Billet or tubular, Delta Joint Add-a-leaf + 2.0 remote reservoir shocks

Listing notes for this family: the K53001 notes say 2017–2023 TRD Pro models have a 0–1.25 in. lift range, the kit won't fit 2WD Tacomas with 5 lug studs, and ADAS (driver assistance) recalibration is required after install (the Stage 4 listing has the same ADAS note).

2005–2023 Toyota Tacoma: EXP Stage 1 to 3

The EXP kits keep your factory front coil springs and give 0–2 in. of front lift with snap rings. ICON calls EXP its entry-level performance system. Each kit includes sway bar relocation brackets, and the recommended tire size is 33 x 11.50 in.

Kit Adds Rear
Stage 1 EXP (K53220) 2.5 EXP front coilovers 2.0 Aluminum Series rear shocks
Stage 2 EXP (K53221) Stage 1 + rear add-a-leaf Add-a-leaf (1.5 in. of rear lift) + 2.0 rear shocks
Stage 3 EXP billet (K53222) / tubular (K53222T) Stage 2 + billet or tubular UCAs with Delta Joint Add-a-leaf + 2.0 remote reservoir rear shocks

The Stage 3 EXP listing says it is not compatible with TRD Pro or with 2005–2015 rear-wheel-drive Tacomas with 5 lug studs, and that trimming is required for the recommended tire size.

2010–2024 Toyota 4Runner and 2010–2014 FJ Cruiser

Kit Front Upper control arms Rear
Stage 1 (K53061) 2.5 Series coilovers, internal reservoir, 0–3.5 in. of lift Stock 2.0 Aluminum Series shocks + 2 in. lift rear coil springs
Stage 2 tubular (K53062T) 2.5 Extended Travel coilovers, 0–3.5 in. of lift Tubular 2.0 internal reservoir shocks + 2 in. lift rear coil springs

Both list 33 x 11.50 in. as the recommended tire size and include 2 in. lift rear coil springs; ICON says the Stage 2 springs give a level stance front to rear. See the Toyota 4Runner accessories guide for other upgrades.

2021–2026 Ford Bronco

The ICON K40011 HOSS 2.0 Package Stage 1 kit is a full set of four 2.5 EXP coilovers with internal reservoirs that reuse the factory coils. It lists 0–2 in. of front lift and 0–1.75 in. of rear lift on Broncos with the factory HOSS 2.0 suspension. For 35 x 12.50 in. tires on a non-Sasquatch Bronco, the listing says ICON's 42000 high-clearance crash bars are required. More Bronco options: Ford Bronco lift and leveling kit guide.

How to pick a stage

  1. Match your truck and years exactly. The 2005–2023 and 2024+ Tacoma kits are not interchangeable, and Tundra and 4Runner kits are generation-specific.
  2. Decide how much front lift you want. EXP kits top out lower (0–2 in. on the Tacoma, 0–2.25 in. on the Tundra Stage 1) because they keep the factory spring. Taller ranges come with the threaded coilovers and upper control arms.
  3. Decide if you need upper control arms. On the Tundra, ICON lists more front lift range with its arms. Billet arms give on-vehicle adjustment; tubular arms have correction built in.
  4. Think about heat and load. Remote reservoir shocks (Tundra Stage 5, Tacoma Stage 4) are made for harder, longer off-road use. Heavy builds may want the stiffer rear springs (Tacoma K53292TX).
  5. Read the application notes on the listing (TRD Pro, TRD Sport, air suspension, 2WD) and plan on an alignment: Do I Need an Alignment After a Leveling Kit?

Not sure which kit fits your trim? Contact us with your year, trim and tire plans and we'll help you confirm it. Related reading: Leveling Kit vs Lift Kit, Monotube vs Twin-Tube Shocks and How to Choose the Right Suspension Kit.

Shop

FAQ

What is the difference between ICON Stage 1 and Stage 2?

It depends on the truck. On the 2005–2023 Tacoma, Stage 2 adds an add-a-leaf (1.5 in. of rear lift) and remote reservoir rear shocks to the Stage 1 coilovers. On the 2024–2026 Tacoma 4WD and the 2022+ Tundra, Stage 2 adds front upper control arms. On the 2010–2024 4Runner, Stage 2 adds extended-travel coilovers and tubular upper control arms. Check the listing for your exact truck.

What does EXP mean in an ICON stage kit?

EXP coilovers are ICON 2.5 Series shocks that reuse your truck's factory coil spring and hardware. Ride height is set with snap rings in grooves on the shock body. The non-EXP 2.5 Series kits use ICON coil springs on a threaded body instead.

What is the difference between billet and tubular upper control arms in ICON kits?

Both use ICON's Delta Joint (Delta Joint PRO on the 2022+ Tundra and 2024+ Tacoma kits). ICON describes the billet aluminum arms as giving on-vehicle caster and camber adjustment, and the tubular arms as having alignment correction built in. On some kits the lift range also differs, for example the 2022+ Tundra Stage 4 is 1.25–3.5 in. with billet arms (K53194) and 2–3.5 in. with tubular arms (K53194T).

What size tires fit with an ICON stage kit?

The listings give a recommended tire size: 33 x 11.50 in. for the Tacoma and 4Runner kits and 35 x 12.50 in. for the 2022+ Tundra kits. Several listings note that trimming or modifications may be needed, and lift heights are stated for a stock-equipped truck.

Do ICON stage kits fit a Tacoma or Tundra TRD Pro?

Not all of them. For example, the K53222 Tacoma Stage 3 EXP and K53192 Tundra Stage 2 EXP listings say they are not compatible with TRD Pro, and the K53001 listing says 2017–2023 Tacoma TRD Pro models get a 0–1.25 in. lift range. Read the notes on the listing for your kit or contact us before ordering.

Ford bronco, Icon, Lift kits, Suspension, Toyota 4runner, Toyota tacoma, Toyota tundra