
This guide groups the Toyota Tundra leveling kits, lift kits, coilovers, upper control arms and rear lift parts we carry from ICON Vehicle Dynamics, Fabtech, ReadyLift, TrailFX and Bilstein, using each product's own fitment and lift numbers. See everything for your truck on Toyota Tundra Parts.
Which Tundra do you have?
| Model years | Generation | Rear suspension |
|---|---|---|
| 2000–2006 | 1st gen | Leaf springs |
| 2007–2021 | 2nd gen | Leaf springs |
| 2022 and newer | 3rd gen | Coil springs; some trucks have a rear air suspension option, so check yours |
Parts for one generation don't fit the others. Some parts are also shared with the Sequoia, but the lift numbers can differ between the two, so always read the Tundra numbers on the listing.
2022 and newer Tundra
Front leveling and coilovers
| Part | Type | Listed fitment | From the listing |
|---|---|---|---|
| Fabtech FTL5606 | 1.5 in. front leveling kit | 2022–2026 Tundra | Fabtech says this is the tallest recommended leveling height for the truck while keeping proper suspension operation. |
| TrailFX T15LL1 | 1.5 in. front leveling kit | 2022–2024 Tundra | Steel, hardware included, about 1.5 hours install. Room for tires up to 33 x 12.00 depending on wheel and suspension setup. |
| ICON 58671 EXP | 2.5 EXP Series front coilover | 2022–2026 Tundra, 2023–2026 Sequoia | Reuses the factory front coil spring. Snap-ring grooves set 0–3 in. of front lift over stock. |
| ICON 58670 | V.S. 2.5 front coilovers, internal reservoir | 2022–2026 Tundra, 2023–2026 Sequoia | 1.25–3.5 in. of adjustable lift on Tundra (3–4.5 in. on Sequoia). |
| ICON 58770 | V.S. 2.5 front coilovers, remote reservoir | 2022–2026 Tundra, 2023–2026 Sequoia | Same lift range as 58670, with remote reservoirs. |
| ICON 58771 | V.S. 2.5 front coilovers, remote reservoir, pair | 2022–2026 Tundra | 5–6 in. of front lift. Made for use with ICON's 6 in. lift system, so it isn't a stand-alone lift. |
| Bilstein 8112 41-332245 (left) / 41-332238 (right) | B8 8112 Black Hawk 3-way adjustable front corner modules with remote reservoir | 2022–2026 Tundra | Sold per side; check the listing for ride height details. |
Fabtech 3 in. uniball lift kits
Fabtech lists ten 3 in. lift kits for the 2022–2026 Tundra. All use Fabtech uniball upper control arms (4130 chromoly with a 1 in. FK stainless uniball and about one extra degree of caster) and list 33 in. or 35 in. tires. Fabtech's fit notes say CrewMax models only, not Hybrid models, and the Dirt Logic versions don't fit trucks with Adaptive Variable Suspension (AVS) shocks. The kits differ in the front setup, the rear shocks and the rear spacer, which comes in two versions: coil spring spacers or air bag spacers.
| Kit | Front (from Fabtech fit notes) | Rear shocks | Rear spacer |
|---|---|---|---|
| K7086 | Spacer on factory coilovers | Performance shocks | Coil spacers |
| K7086M | Spacer on factory coilovers | Stealth monotube | Coil spacers |
| K7086DL | Front shock spacer | Dirt Logic 2.25 | Coil spacers |
| K7087DL | Dirt Logic 2.5 coilovers (non-reservoir) | Dirt Logic 2.25 | Coil spacers |
| K7088DL | Dirt Logic 2.5 reservoir coilovers | Dirt Logic 2.25 | Coil spacers |
| K7089 | Spacer on factory coilovers | Performance shocks | Air bag spacer |
| K7089M | Spacer on factory coilovers | Stealth monotube | Air bag spacer |
| K7089DL | Front shock spacer | Dirt Logic 2.25 | Air bag spacers |
| K7090DL | Dirt Logic 2.5 coilovers (non-reservoir) | Dirt Logic 2.25 | Air bag spacer |
| K7091DL | Dirt Logic 2.5 reservoir coilovers | Dirt Logic 2.25 | Air bag spacers |
Trim lists differ by kit (for example, some versions don't list the TRD Pro or the Capstone), and the K7086DL and K7089DL product text also mentions Dirt Logic 2.5 coilovers while their fit notes list a front shock spacer. Read the trim list on the listing or ask us before ordering. Fabtech recommends professional installation and an alignment. The spacers are also sold alone: FTS26111 coil spring spacer kit and FTS26112 air bag spacer kit.
Upper control arms
- ICON 58561DJ (billet aluminum, camber and caster adjustment) and ICON 58461DJ (tubular DOM steel, extra caster built in), both with the Delta Joint PRO, for 2022–2026 Tundra and 2023–2026 Sequoia.
- Fabtech FTS26105: uniball upper arms (4130 chromoly) for stock or lifted 2022–2026 Tundras, with added caster for oversized tires.
Rear lift
- ICON 51211 triple-rate rear coil springs (2022–2026): 0.75 in. of rear lift on a Tundra with the TRD suspension package, 1.25 in. on a non-TRD Tundra.
- Fabtech rear coil or air bag spacers come in the kits above and are sold alone (FTS26111 / FTS26112).
Supporting parts
- ICON 55154 sway bar drop: ICON says it's required above 2.25 in. of front lift and recommended for any front lift.
- ICON 55164 TRD skid plate spacer: lowers the TRD Off-Road / TRD Pro skid plate slightly so it clears the dropped sway bar.
- ICON 55156 front differential drop: lowers the front differential to improve CV angles at full droop.
- ReadyLift 67-52420CV: high-performance CV axle kit for lifted 2022+ Tundras.
- Rear shocks for 0–1.5 in. of lift: ICON 56516, 56516R, 57840EP and 57845CP; for 3–3.5 in.: ICON 56517.
2007–2021 Tundra (2nd gen)
Front leveling, coilovers and lift
| Part | Type | Listed fitment | From the listing |
|---|---|---|---|
| Fabtech FTL5605 | 2 in. front leveling kit | 2007–2021 Tundra (the product text mentions 2012–2021) | Height chosen to avoid ball joint, tie rod or steering bind. |
| TrailFX T20LL2 | 2 in. front leveling kit (strut extension) | 2007–2021 Tundra (title says 2012–2021) | Steel, hardware included, about 1 hour install. Room for tires up to 33 x 12.00. |
| ICON 58650 | V.S. 2.5 front coilovers, internal reservoir | 2007–2021 Tundra, 2008–2022 Sequoia | 1–3 in. of adjustable lift. |
| ICON 58750 | V.S. 2.5 front coilovers, remote reservoir | 2007–2021 Tundra, 2008–2022 Sequoia | 1–3 in. of adjustable lift. |
| Fabtech K7054 / K7054M | 6 in. coil spacer lift systems | 2016–2021 Tundra | About 6 in. of lift, designed to work with the factory steering geometry for oversized tires. |
If your 2007–2011 Tundra needs a leveling kit, check with us first: the two 2 in. kits list 2007–2021 in their fitment, but their product text mentions 2012–2021.
Upper control arms
- ICON 58460DJ: tubular DOM steel arms with Delta Joints and built-in caster correction (2007–2021 Tundra, 2008–2022 Sequoia).
- ReadyLift 67-54750: SST upper control arms, sold in pairs, the same arms used in ReadyLift's SST lift kits (2007–2021).
- Fabtech FTS26041 (listed for 2007–2014 and 2017–2020): uniball arms for more wheel travel with Dirt Logic 2.5 coilovers, including leveled trucks. Fabtech FTS26039 (2007–2013) is designed for trucks with a 4 in. lift.
Rear lift (leaf springs)
- ICON 51200 rear spring expansion pack: replaces the factory secondary leaves (keeps the main and overload leaves) for 1.5 in. of rear lift with a softer ride; U-bolts included. ICON notes it's not compatible with the TRD rear sway bar kit.
- ICON 158509 Multi-Rate RXT leaf pack: full replacement pack with an add-in leaf that adds 15% or 25% spring rate for heavier, outfitted trucks.
Supporting parts
- ReadyLift 67-5443: lowers the TRD Pro skid plate when the differential is dropped with a lift kit (2007–2021).
- Rear shock for 0–1.5 in. of lift: ICON 56506.
2000–2006 Tundra (1st gen)
- Bilstein 5100 24-261425: ride-height adjustable front shock, 0–3 in. of front lift with the factory coil (also 2001–2007 Sequoia).
- Fabtech FTS2400K: threaded-body coilover kit for lifted 2000–2006 Tundras.
- ICON 51100 progressive add-a-leaf: 1.5 in. of rear lift, replaces the factory overload leaves and lowers the rear spring rate about 10%.
- Rear shock for 0–1.5 in. of lift: ICON 56504.
Leveling kit or lift kit?
A leveling kit raises the front to take out the factory rake. Spacer kits like the Fabtech FTL5605/FTL5606 and TrailFX T20LL2/T15LL1 keep your factory shocks, while adjustable coilovers like ICON's replace them and set ride height with the spring seat. A lift raises both ends, so you pair the front with rear springs, a leaf pack or spacers. Bigger lifts usually add upper control arms, a sway bar or differential drop and longer shocks. More on the trade-offs: Leveling Kit vs Suspension Lift: Ride Quality Compared and Coilover vs Shock and Spring.
After any ride-height change, get an alignment: Do I Need an Alignment After a Leveling Kit?. Other Tundra guides: Toyota Tundra Accessories by Generation, Tundra Running Boards and Nerf Bars and Tundra Tonneau Cover Guide. Smaller Toyota: Toyota Tacoma Lift and Leveling Kit Guide.
Shop by type
- Tundra Lift & Leveling Kits · Toyota Tundra Parts · 2025 Tundra suspension
- Lift kits · Leveling kits · Shocks & struts · Suspension components · All suspension
- Brands: ICON Vehicle Dynamics · Fabtech · ReadyLift · TrailFX · Bilstein
FAQ
Will lift parts for a 2007–2021 Tundra fit a 2022 or newer Tundra?
No. The 2022-and-newer Tundra is a new generation with a coil-spring rear suspension, and every part in this guide lists its own Tundra years. For a 2022+ truck, pick parts that list 2022–2026, such as the Fabtech FTL5606 leveling kit, the ICON 58670 or 58770 coilovers or the Fabtech K7086/K7089 lift kits.
How much lift do ICON coilovers give a Tundra?
The ICON 58650 and 58750 front coilover kits list 1–3 in. of adjustable lift on the 2007–2021 Tundra. The ICON 58670 and 58770 kits list 1.25–3.5 in. on the 2022–2026 Tundra, and the ICON 58671 EXP coilover, which reuses the factory spring, lists 0–3 in. The ICON 58771 kit (5–6 in.) is made for ICON's 6 in. lift system.
Do the Fabtech 3 in. lift kits fit every 2022+ Tundra?
No. Fabtech's fit notes for the K7086 and K7089 kit families say CrewMax models only and not Hybrid models, and the Dirt Logic versions also don't fit trucks with Adaptive Variable Suspension (AVS) shocks. Some versions also leave out certain trims, so check the trim list on the listing or ask us before ordering.
Do I need a sway bar drop kit when I lift a 2022+ Tundra?
ICON says its 55154 front sway bar drop brackets are required for front lift heights above 2.25 in. over stock and recommended for any front lift, to reduce bind in the factory sway bar links. On TRD Off-Road and TRD Pro trucks, ICON pairs it with the 55164 skid plate spacer kit to keep the sway bar from hitting the TRD skid plate.
What size tires fit a leveled Tundra?
The TrailFX leveling kit listings give tire sizes: the T20LL2 (2007–2021) and T15LL1 (2022–2024) list room for tires up to 33 x 12.00, depending on wheel and suspension setup. Fabtech's 3 in. lift kits for 2022+ list 33 in. tires with minor trimming and 35 in. tires with cutting on 18 x 9 or 20 x 9 wheels with 5 in. backspacing.

