ICON 58680 front coilover kit for 2024-2026 Toyota Tacoma
Quick answer: Tacoma lift and leveling parts are made for one generation at a time, so start with your model year: 1995–2004, 2005–2015, 2016–2023 or 2024 and newer. For a mild lift, a front leveling kit or adjustable front coilovers plus a rear spacer, add-a-leaf or new springs is the usual path. For bigger lifts, add upper control arms, a differential drop (4WD) and matching rear shocks. Every part below lists its fitment on its own page, and they are all in our lift kits and leveling kits.

ICON 58680 V.S. 2.5 Series front coilover kit for 2024-2026 Toyota Tacoma

This guide groups the Toyota Tacoma lift kits, leveling kits, coilovers, upper control arms and rear lift parts we carry from ICON Vehicle Dynamics, Fabtech, Bilstein, ReadyLift, Skyjacker, TrailFX and MaxTrac, using each product's own fitment and lift numbers. See everything for your truck on Toyota Tacoma Parts.

Which Tacoma do you have?

Model years Generation Rear suspension
1995–2004 1st gen Leaf springs
2005–2015 2nd gen Leaf springs
2016–2023 3rd gen Leaf springs
2024 and newer 4th gen Coil springs on most versions; some use leaf springs, so check your truck

Some 2nd- and 3rd-gen parts are listed for 2005–2023, but not all. ICON's front coilovers, for example, give a different lift range on 2005–2015 trucks than on 2016–2023 trucks. Always match the years on the listing.

2024 and newer Tacoma

Front leveling and lift

Part Type Listed fitment From the listing
TrailFX T15LL2 1.5 in. front leveling kit (aluminum strut extensions) 2024 Tacoma No drilling or cutting, about 1.5 hours install. Room for tires up to 33 x 12.00 in. depending on wheel and tire specs (17 in. minimum wheel, 5.50 in. max backspacing, 0 mm offset). Does not include shocks.
Fabtech FTL5607 Front leveling kit (billet aluminum spacers above the factory coilovers) 2024–2026 Tacoma Installs without taking the factory coilovers apart. Fabtech says it gives maximum practical lift without ball joint or tie rod bind.
ICON 58680 V.S. 2.5 Series front coilovers, internal reservoir, pair 2024–2026 Tacoma 1.25–3 in. of adjustable front lift. ICON pairs it with its front differential drop on 4WD trucks and with ICON 2.0 or 2.5 rear shocks.
Fabtech Dirt Logic 2.5 FTS26126 Stainless remote reservoir coilover 2024 Tacoma Coilover with remote reservoir for heat control on long trail runs.
Fabtech K7102 / K7103DL Uniball upper control arm lift systems with shocks K7102: 2024 Tacoma (2.4L). K7103DL: 2024–2026 Tacoma Complete lift systems with uniball upper arms and matched shocks. The listings don't state the lift height, so check with us for your setup.

Upper control arms

  • ICON 58552GDJ (billet aluminum) and ICON 58452DJ (tubular DOM steel), both with the rebuildable Delta Joint PRO. Listed for the 2024–2026 Tacoma, 2024–2026 Land Cruiser 250, 2024–2026 Lexus GX550 and 2025–2026 4Runner. The billet arm adds on-vehicle camber and caster adjustment; the tubular arm has extra caster built in.
  • ReadyLift 67-54000: DOM tube steel arms with a high-angle ball joint, designed for 1–3.5 in. ReadyLift lifts. Listed for 2024–2026 Tacoma and Land Cruiser and 2025–2026 4Runner.
  • Fabtech FTS26122: uniball control arm kit for the 2024 Tacoma. Fabtech recommends an alignment after install.

Rear lift and springs

These rear parts are for the coil-spring rear suspension.

  • ReadyLift 26-54100 (1 in.) and ReadyLift 26-54200 (2 in. spacer): rear coil spring spacers for 2024–2026, installed with no modifications. ReadyLift notes fitment hasn't been tested on TRD Pro and Hybrid models.
  • ICON 51213 triple-rate rear coils: 0.5 in. of rear lift over stock, softer ride with a firmer overload rate.
  • ICON 51215 dual-rate Overland rear coils: built for heavier builds, about 0.5 in. of rear lift over stock with roughly 600 lb of extra weight in the rear.
  • Bilstein B12 (Special) 53-333377: coil spring set for 2024–2026 Tacoma, Crew Cab only.

Supporting parts

  • ICON 55160 front differential drop (2024–2026 Tacoma 4WD): lowers the front differential to improve CV angles at full droop and prevent CV bind with ICON coilovers.
  • ICON 51020 top plate reinforcement: ICON found the factory front upper shock mount and shock stem bushing can fail under hard use, and recommends this kit for 2024–2025 Tacomas driven hard off-road on the factory front coilovers.
  • Rear shock: ICON 56518 V.S. 2.0, internal reservoir, for 2024–2026 Tacoma with 0–1 in. of lift.
  • Fabtech FTS26124 coilover shock spacers and FTS26125 coil spring spacers (2024) are for use with matching Fabtech suspension parts.

2005–2023 Tacoma (2nd and 3rd gen)

Front lift, leveling and coilovers

Part Type Listed fitment From the listing
ICON 58630 V.S. 2.5 front coilovers, internal reservoir, pair 2005–2023 Tacoma 0–3.5 in. adjustable lift on 2005–2015, 0–2.75 in. on 2016–2023.
ICON 58635 V.S. 2.5 extended-travel front coilovers, internal reservoir, pair 2005–2023 Tacoma Same lift ranges as 58630, extended travel.
ICON 58735 / 58735C V.S. 2.5 extended-travel front coilovers, remote reservoir (58735C adds CDCV adjusters) 2005–2023 Tacoma Same lift ranges as 58630.
ICON 58632 2.5 EXP Series front coilover, internal reservoir 2005–2023 Tacoma Mounts shaft-up and includes the upper shock mount and spring seat.
Bilstein 5100 24-263108 Ride-height adjustable front shock 2016–2023 Tacoma Snap-ring grooves set 0–3 in. of front lift with the factory springs (depends on application).
Skyjacker TT20MS 2 in. front leveling spacers 2005–2018 Tacoma (also 2003–2018 4Runner, 2007–2014 FJ Cruiser) 2 in. of front lift to reduce the factory rake.
Fabtech K7019 6 in. basic lift system with shocks 2005–2013 Tacoma About 6 in. of lift using steel coilover spacers with the stock front coilovers, extended ductile iron knuckles, arched crossmembers and a 1/4 in. differential skid plate.

Upper control arms

  • ICON 58450DJ (tubular DOM steel, built-in caster correction) and ICON 58550DJ (billet aluminum, on-vehicle caster and camber adjustment), both with Delta Joints, for 2005–2023. ICON says its arms allow more wheel travel when paired with its extended-travel coilovers.
  • Fabtech FTS26073 (2015–2023): replaces the upper ball joint with a 1 in. stainless uniball and adds caster to help with alignment on leveled trucks.

Rear lift

  • ICON 51100 progressive add-a-leaf (1996–2023 Tacoma): 1.5 in. of rear lift. It replaces the factory overload leaves, lowers the rear spring rate about 10%, and comes with U-bolts and center pins.
  • ICON 158505 Multi Rate RXT leaf pack (2005–2023): a full replacement leaf pack, user-adjustable with an add-in leaf, built for more droop travel.
  • Skyjacker Softride TCR515S (2005–2018): progressive multileaf packs for a 1.5 in. rear lift.
  • ReadyLift 67-7120 universal add-a-leaf (listed for 1995–2021 Tacoma): 0.75 to 1.5 in. of rear lift depending on the truck.

Supporting parts

  • ReadyLift 47-5004 (2005–2023): lowers the front differential about 1 in. to help CV axle angles on lifted and leveled trucks without a diff drop already installed.
  • ICON 611030: moves the front sway bar 1 in. forward to clear aftermarket coilovers.
  • Rear shocks for mild lifts: ICON 56503 (non-reservoir) and 56503R (remote reservoir), both for 2005–2023 with 0–1.5 in. of lift.

1995–2004 Tacoma (1st gen)

  • Bilstein 6112 47-310896 (1996–2004): front kit with two 60 mm monotube shocks, matched coil springs and billet spring seats; 0–2.75 in. of adjustable front lift.
  • Bilstein 5100 24-249928 (1996–2004): ride-height adjustable front shock, up to 3 in. of front lift with the factory springs.
  • Fabtech K7003 and Fabtech K7002M (both 1995–2004): 6 in. lift systems with shocks.
  • ICON 58400DJ tubular upper control arms (1996–2004 Tacoma, 1996–2002 4Runner).
  • Rear: Skyjacker TCR25S 2.5 in. leaf pack (1998–2004), Fabtech FTS205 add-a-leaf (1995–2004), MaxTrac 716920 1.5–2 in. lift shackles (1996–2004), Fabtech FTS2096 2 in. shackles (1995–2004) and the ICON 51100 add-a-leaf above. ICON 56502R rear shock fits 1996–2004 with 0–1.5 in. of lift.

Leveling kit or lift kit?

A leveling kit raises the front to take out the factory rake (the nose sits lower than the tail). Spacers like the Fabtech FTL5607 and Skyjacker TT20MS keep your factory shocks. Adjustable coilovers like ICON's and the Bilstein 5100/6112 replace them and set ride height with the spring seat. A lift raises both ends, so you pair the front with a rear spacer, add-a-leaf, springs or shackles. Bigger lifts usually need upper control arms, a diff drop on 4WD trucks and longer shocks. More on the trade-offs: Leveling Kit vs Suspension Lift: Ride Quality Compared and Coilover vs Shock and Spring.

After any ride-height change, get an alignment: Do I Need an Alignment After a Leveling Kit?. Other Tacoma guides: Toyota Tacoma Accessories by Generation, Tacoma Running Boards and Nerf Bars and Tacoma Tonneau Cover Guide. Shock basics: Monotube vs Twin-Tube Shocks.

Shop by type

FAQ

Will lift parts for a 2005–2023 Tacoma fit a 2024 or newer Tacoma?

No. The 2024-and-newer Tacoma is a new generation, and every lift and leveling part in this guide lists its own Tacoma years. Pick parts that list your model year, such as the ICON 58680 coilovers (2024–2026) or the Fabtech FTL5607 leveling kit (2024–2026) for a new Tacoma.

How much lift do ICON coilovers give a Tacoma?

The ICON 58630, 58635, 58735 and 58735C front coilover kits list 0–3.5 in. of adjustable lift on 2005–2015 Tacomas and 0–2.75 in. on 2016–2023 Tacomas. The ICON 58680 kit for the 2024–2026 Tacoma lists 1.25–3 in.

Do I need a differential drop kit when I lift my Tacoma?

Differential drops lower the front differential to improve CV axle angles on lifted 4WD trucks. ICON says its 55160 drop kit (2024–2026 Tacoma 4WD) maximizes suspension travel and prevents CV bind when paired with ICON coilovers, and the ReadyLift 47-5004 kit lowers the front differential about 1 in. on lifted and leveled 2005–2023 Tacomas.

Do I need new upper control arms after lifting a Tacoma?

Not always, but they help on many lifted trucks. The Fabtech FTS26073 (2015–2023) listing says its built-in caster helps with alignment challenges common with leveling kits, ICON's arms are built for more wheel travel with their extended-travel coilovers, and the ReadyLift 67-54000 arms (2024+) are designed for 1–3.5 in. lifts. Always get an alignment after changing ride height.

What size tires fit a leveled 2024 Tacoma?

The only leveling kit listing that gives a tire size is the TrailFX T15LL2: tires up to 33 x 12.00 in., depending on wheel and tire specs, with at least a 17 in. wheel, 5.50 in. maximum backspacing and 0 mm offset. Tire fit also depends on trim and other parts, so check before you buy.

Do the ReadyLift rear spacers fit a Tacoma TRD Pro or Hybrid?

ReadyLift's listings for the 26-54100 and 26-54200 rear spacers say fitment has not been tested on TRD Pro and Hybrid models. Contact us with your trim before ordering if you have one of those.

Buying guide, Icon vehicle dynamics, Leveling kits, Lift kits, Suspension, Toyota tacoma