Bilstein B8 6112 coilover suspension kit 47-309524

Quick answer: A coilover is a shock with the coil spring mounted around it as one unit, usually with an adjustable spring seat so you can set ride height. A shock plus separate spring setup keeps them apart: the spring carries the weight and the shock only controls movement. Coilovers suit owners who want adjustable front lift and more control off-road; a quality shock alone suits owners who want a better ride at stock or near-stock height. Browse both on our Shocks & Struts page.

What's the difference?

Coilover Shock + separate spring
Layout Spring sits on a seat on the shock body Spring sits in its own pocket (or leaf springs in the rear); shock mounts separately
Ride height Often adjustable at the spring seat Set by the spring (or a leveling/lift kit)
What you replace The whole unit, or the shock/spring as a kit Shocks only, keeping factory springs
Typical use on trucks Front of independent-front-suspension trucks and SUVs, lift and performance builds Rear of most pickups; replacement shocks at stock height

The Bilstein lineup as an example

Bilstein makes all three approaches, and we carry each one:

  • B8 5100 (shock only): monotube shocks that work with your existing springs. Example: Bilstein 5100 33-318950 for the F-150. See Bilstein 5100 vs 5160.
  • B8 6112 (coilover kit): a kit with shocks, matched coil springs and spring seats. The 6112 kit 47-309524 for select Silverado 1500 and Sierra 1500 trims includes two 60mm monotube shocks, two coil springs and two billet aluminum spring seats, with a snap-ring grooved body so the spring seat can be set in different positions. We also carry 6112 kits listed for the Ford Bronco, Toyota Tacoma, 4Runner and other trucks.
  • B8 8112 (complete corner modules): assembled coilovers with a remote reservoir. The 8112 ZoneControl CR module 41-324158 uses position-sensitive damping (three compression zones, two rebound zones) and a threaded spring seat. The 8112 Black Hawk module 41-332245 for the Tundra adds external high- and low-speed compression adjusters. Bilstein sells these as left and right modules.

How much lift a coilover gives depends on your exact trim and package. Bilstein lists different front lift ranges by trim, so read the fitment notes on each product page.

When a coilover makes sense

  • You want to level or lift the front of an IFS truck and fine-tune ride height.
  • You drive off-road often and want more damping control, a larger piston or a remote reservoir that holds more oil and helps cooling.
  • You want a complete assembly instead of moving factory springs to new shocks.

When a shock alone is the better choice

  • Your truck sits where you want it and you just want a better ride or to replace worn shocks.
  • You're working on the rear of a leaf-spring truck, where the springs and shocks are always separate.
  • You already run a leveling kit or lift kit and need shocks sized for that height.

Things to check before you buy coilovers

  • Upper control arms: lifting the front changes suspension angles. For example, Bilstein's fitment notes for the 8112 Tundra modules say aftermarket upper control arms are required and recommend the Bilstein B8 Pro Control Arm Kit 51-332334. Check your listing.
  • Trim and package: fitment often changes with trim (for example TRD or Trail Boss packages) and suspension options such as KDSS on the 4Runner.
  • Alignment: any change in ride height means a front-end alignment. See do I need an alignment after a leveling kit?
  • Installation: Bilstein recommends professional installation for its 6112 kits. Spring compression requires the right tools.

Related reading: monotube vs twin-tube shocks, leveling kit vs lift kit. Shop all Bilstein or the full Suspension category.

FAQ

Is a coilover better than a shock?

Not automatically. A coilover adds adjustable ride height and, on higher-end units, more damping control. If you're happy with your truck's height, a quality monotube shock with your existing springs may be all you need.

Do coilovers lift a truck?

Many truck coilovers have an adjustable spring seat that can raise the front. The amount depends on the vehicle, trim and the seat position; check the fitment notes on the product page.

Can I put coilovers on the rear of my pickup?

Most pickups use leaf springs in the rear, so the rear uses separate shocks. Coilovers are most common on the front of independent-front-suspension trucks and SUVs.

Do I need new control arms with coilovers?

Sometimes. Some lifted coilover setups need aftermarket upper control arms; Bilstein lists this requirement for its 8112 Tundra modules, for example. Check your product's fitment notes.

Bilstein, Coilovers, Shocks, Suspension