Fabtech K2378DL 3-inch uniball lift system for 2021-2027 Ford Bronco
Quick answer: Every lift and leveling kit below is for the 2021-and-newer Ford Bronco, but most are split by suspension package: whether your Bronco has the Sasquatch package, which factory shocks it has (Bilstein or non-Bilstein), and which HOSS suspension version it has. For a mild change, a 1.25–1.5 in. front leveling kit or a 2 in. spacer lift is the usual start. For 3–4 in. with 37 in. tires, look at the ReadyLift SST kits with upper control arms or the Fabtech uniball systems. Fabtech's 5–6 in. kits are made for 38–40 in. tires. See them together on Ford Bronco Lift & Leveling Kits.

Fabtech K2378DL uniball 3-inch lift system with Dirt Logic 2.5 coilovers for 2021-2027 Ford Bronco

This guide groups the Ford Bronco leveling kits, lift kits, coilovers and upper control arms we carry from ReadyLift, Fabtech, Zone Offroad, TrailFX and ICON Vehicle Dynamics, using each product's own fitment notes and lift numbers. It covers the full-size Bronco (2021 and newer), not the Bronco Sport, which is a different vehicle (one Bronco Sport kit is listed at the end). See everything for your Bronco on Ford Bronco Parts.

First, check your Bronco's suspension package

The Bronco came with several factory suspension setups, and the kit listings are written around them. Before you order, check your window sticker or build sheet for:

  • Sasquatch package (yes or no). Many kits are made for one or the other.
  • Factory shock brand: Bilstein or non-Bilstein. Zone Offroad's listing says the Bilstein-shock Broncos are the ones with the Sasquatch package, Badlands and Wildtrak.
  • HOSS version (HOSS 1.0, 2.0 or 3.0). ICON's EXP coilovers are sold per HOSS version, and several kits below say they don't fit HOSS 3.0.
  • Raptor: the Bronco Raptor is excluded from most kits here; a few Fabtech kits list it, as noted below.
  • Rear sway bar option and front axle notes, which a couple of kits mention (below).

If you aren't sure which applies to your Bronco, ask us with your VIN or build sheet before ordering.

Front leveling kits

Part Front lift Listed fitment From the listing
ReadyLift 66-21100 1.25 in. 2021–2027 Bronco, with or without Sasquatch Billet aluminum top and lower strut extensions. ReadyLift lists 315/70R17 tires with Sasquatch and 285/70R17 without; up to 35 x 12.50 on a 9 in. wheel (+18 offset) with trimming, depending on trim.
Fabtech FTL5212 1.5 in. 2021–2027 Bronco 4WD Billet aluminum spacers that sit on top of the factory coilovers, so the coilovers don't need to come apart.
TrailFX F15LL3 1.5 in. 2021–2024 Bronco (trim list includes Base through Raptor) Aluminum strut extensions, hardware included, about 1.5 hours install, no drilling or cutting. Tires up to 33 x 12.00 on at least a 17 in. wheel with 5.5 in. backspacing and 0 mm offset.

Spacer lift kits (front and rear)

These keep the factory shocks and springs and lift both ends with spacers. The main thing to match is the Sasquatch package.

Kit Lift (front / rear) Made for From the listing
ReadyLift 69-21200 2 in. SST 2 in. / 2 in. Non-Sasquatch Broncos (not Sasquatch, Badlands or Wildtrak) Billet aluminum spacers, bolt-on. ReadyLift lists 305/70R17 tires; max 35 x 12.5 with trimming on a 9 in. wide, 0 offset wheel.
ReadyLift 69-21210 High Payload SST 2 in. / 2.5 in. Non-Sasquatch Broncos (excludes Sasquatch, Badlands, Wildtrak, First Edition) Extra rear height for heavy gear such as rooftop tents, steel bumpers or a bigger spare. The 2.5 in. rear figure is with the vehicle lightly loaded. Max tire 35 in.
Zone Offroad ZONF1220 2 in. / 1 in. 2021–2022 Base shock package only (listed trims: Base, Big Bend, Black Diamond, Outer Banks) Won't fit Broncos with a rear sway bar (build sheet option DZLAB) or HOSS 3.0. Tires up to 35 x 12.5; about 2–3 hours, no welding or cutting.
Zone Offroad ZONF1221 2 in. / 1 in. 2021–2025 Broncos with Bilstein shocks (Sasquatch, Badlands, Wildtrak) Not for HOSS 3.0. Front strut and spring perch spacers plus bump stop extensions. 35 x 12.5 tires on 17 x 9 or 20 x 9 wheels, depending on setup.

3–4 in. lift kits with upper control arms

Past about 2 in. of front lift, the factory upper control arms run out of angle. ICON's note on its front EXP coilover says the factory arms won't align properly past 2 in. of lift and recommends aftermarket arms above that. These kits include new arms.

ReadyLift SST kits

Kit Made for From the listing
ReadyLift 69-21310 3 in. SST w/ UCAs Sasquatch-package Broncos only (including Badlands, Wildtrak, First Edition); not HOSS 3.0 or Bronco Sport Tubular upper arms with high-angle ball joints, billet front spacers, rear coil spring spacers (2 in. rear), heavy-duty rear track bar bracket. Up to 37 x 12.50 on 17 x 8.5 wheels (+18 mm); 38 x 12.50 with trimming.
ReadyLift 69-21300 3 in. SST Sasquatch-package Broncos 3 in. front and 3 in. rear, tubular upper arms, rear track bar bracket. Max tire listed: 38 in.
ReadyLift 69-21410 4 in. SST w/ UCAs Non-Sasquatch Broncos; not Badlands, Wildtrak, First Edition, HOSS 3.0 or Bronco Sport Tubular upper arms with high-angle ball joints, billet front spacers, rear coil spring spacers (2 in. rear) and a heavy-duty rear track bar bracket. Up to 37 in. tires.
ReadyLift 62-21360 Premium 3.5 in. SST 3.3 Series 2021–2027 Bronco; not Raptor or Bronco Sport Falcon 3.3 Fast Adjust coilovers, billet aluminum upper arms, adjustable rear lower control arms, adjustable rear track bar and track bar bracket. Up to 37 x 12.50 on 17 x 8.5 wheels (+18 mm); 38 x 12.50 with trimming.

ReadyLift lists the 69-21300, 69-21310 and 69-21410 as difficult installs (5+ hours) that need professional installation. The ReadyLift 67-21361 heavy-duty track bar bracket is also sold alone for Broncos with a 3–4 in. lift; ReadyLift says it corrects the roll center and reduces body roll.

Fabtech uniball systems with Dirt Logic shocks

These pair Fabtech uniball upper control arms with Dirt Logic coilovers. Fabtech's fit notes split them by the factory shocks, so check whether your Bronco has Bilstein shocks.

Kit Lift Shocks (from the fit notes) Factory shocks Listed engines
K2378DL 3 in. Dirt Logic stainless reservoir shocks (front 2.5 coilovers) Not stated 2.3L, 2.7L; 2022–2027 3.0L Raptor
K2389DL 3 in. Front Dirt Logic 2.5 reservoir coilovers, rear Dirt Logic 2.25 reservoir coilovers Bilstein 2.3L, 2.7L; 2023–2027 3.0L Raptor
K2385DL 4 in. Front 2.5 / rear 2.25 Dirt Logic reservoir coilovers Non-Bilstein 2.3L, 2.7L; 2022–2027 3.0L Raptor
K2390DL 4 in. Front 2.5 / rear 2.25 Dirt Logic reservoir coilovers Non-Bilstein 2.3L, 2.7L

Fabtech recommends professional installation, and the K2378DL may ship by LTL freight. The K2385DL and K2390DL fit notes read the same except for the Raptor line, and the Raptor entries on these Fabtech kits are worth confirming with us before you order for a Bronco Raptor.

Upper control arms sold alone

  • Fabtech K2383: uniball arms (1.50 in. OD 4130 chromoly, 0.120 in. wall, 1 in. FK stainless uniballs) that fit the factory ball joint tapers without spindle changes and add caster. Fit notes: 3 in. with uniballs and shock spacers, for use with the Bilstein factory shocks (2021–2024 Badlands, Big Bend, Black Diamond, Outer Banks, Wildtrak; 2021–2027 Badlands).
  • Fabtech K2384: the same arm design, with fit notes for 4 in. with uniballs and shock spacers on non-Bilstein Broncos (trim list from Base to Raptor, 2021–2027).
  • Fabtech FTS22336: uniball UCA lift system for 2021–2023 Broncos, a 3 in. upgrade to Fabtech's 4 in. Budget System.

5–6 in. Fabtech lift kits

Fabtech's tallest Bronco kits are built from 1/4 in. steel with skid plates, list room for 38 in. or 40 in. tires and are FMVSS 126 certified. Their fit notes list the 2.3L and 2.7L Broncos and say they don't fit the HOSS 3.0 package, Raptor models, Broncos with the M190 front differential, or Broncos with the front axle disconnect (FAD).

Kit Lift From the fit notes
K2391 5 in. With shock spacers; Bilstein-shock Broncos only
K2395DL 5 in. With Dirt Logic 2.5 reservoir coilovers
K2396DL 6 in. With Dirt Logic 2.5 reservoir coilovers; non-Bilstein

Two Fabtech component boxes are also listed: FTS22357 and FTS22358. Their fit notes say they are boxes for the K2391 / K2395DL / K2396DL kits (FTS22358 is box 1 of 2), and the listings say other parts are needed for a complete lift. Order a complete kit unless you know which box you're missing.

ICON coilovers and crash bars

ICON sells the Bronco front and rear coilovers separately and matches them to Ford's HOSS suspension version. None of the ICON parts below fit the Bronco Raptor.

Part Type Lift range From the listing
ICON 48601 Front 2.5 EXP coilover, for HOSS 1.0 1.375–3 in. front Reuses the factory coil spring; snap-ring height setting; fully rebuildable. Above 2 in. of lift ICON recommends aftermarket upper control arms.
ICON 48602 Front 2.5 EXP coilover, for HOSS 2.0 0–2 in. front Reuses the factory coil spring.
ICON 48612 Rear 2.5 EXP coilover, for HOSS 2.0 0–1.75 in. rear Reuses the factory coil spring.
ICON 48610 Rear V.S. 2.5 coilover kit with ICON triple-rate springs 2–3 in. rear on 4-door non-Sasquatch; 1.25–2.25 in. on 4-door Sasquatch Up to 14 in. of wheel travel per ICON; 37 in. tires need coilover bump stop spacers.

The factory crash bars on non-Sasquatch Broncos have to come off for 35 in. or larger tires. ICON's 42000 High Clearance Crash Bar Kit keeps crash bars while clearing 35 x 12.50 tires, and ICON's front coilover listings name it for 35 in. tires on non-Sasquatch Broncos. On a Sasquatch Bronco you need the mounting bolts from a non-Sasquatch Bronco (or equivalent metric bolts), per ICON.

Shocks and related parts

  • Bilstein B8 5100 and B8 6100 ride-height adjustable front shocks for the Bronco come in several part numbers, so match the listing to your Bronco: see Ford Bronco Shocks.
  • Bilstein 11-344841 conversion kit: an optional upgrade for the Bilstein B8 6112 and 6100 only, to restore lift height on Broncos that carry a heavy load all the time.
  • Fabtech shock spacer kits (FTS22342, FTS22343, FTS22359) for compatible Fabtech systems, and JKS8309 rear lower shock skid plates (2021–2025).

Bronco Sport

The Bronco Sport is a smaller crossover with different suspension, so full-size Bronco kits don't fit it. For the Bronco Sport we carry the ReadyLift 69-21150 1.5 in. SST kit (front and rear, excluding Badlands and First Edition), which ReadyLift lists with 245/65-17 tires on 17 x 8 wheels (+40 mm).

Leveling kit or lift kit?

A leveling kit raises the front to take out the factory nose-down rake and keeps your factory coilovers. A spacer lift raises both ends on the factory parts. Coilover kits like ICON's or Fabtech's replace the shocks and set height with the spring seat, and bigger lifts add upper control arms, a track bar bracket and sometimes skid plates. More on the trade-offs: Leveling Kit vs Suspension Lift: Ride Quality Compared and Coilover vs Shock and Spring. After any ride-height change, get an alignment: Do I Need an Alignment After a Leveling Kit?

Other Bronco guides: Ford Bronco Upgrades: Where to Start and Bronco Running Boards, Nerf Bars and Rocker Guard Steps. For Jeeps: Jeep Wrangler and Gladiator Leveling Kit Guide.

Shop by type

FAQ

Do Bronco lift kits fit both Sasquatch and non-Sasquatch Broncos?

Usually not. Most kits are made for one or the other. For example, the ReadyLift 69-21310 3 in. SST kit is for Sasquatch-package Broncos and the 69-21410 4 in. kit is for non-Sasquatch Broncos, and Zone Offroad makes the ZONF1220 for 2021–2022 Base shock package Broncos and the ZONF1221 for Bilstein-shock Broncos. The ReadyLift 66-21100 1.25 in. leveling kit is listed for Broncos with or without Sasquatch.

What does HOSS 3.0 mean for a Bronco lift kit?

HOSS is Ford's name for the Bronco's factory suspension versions. Several kits in this guide say they don't fit HOSS 3.0, including the Zone Offroad ZONF1220 and ZONF1221, the ReadyLift 69-21310 and 69-21410 SST kits, and the Fabtech K2391, K2395DL and K2396DL. ICON sells separate EXP coilovers for HOSS 1.0 (48601) and HOSS 2.0 (48602 front, 48612 rear). Check your build sheet for your HOSS version.

What size tires fit a lifted Bronco?

It depends on the kit. The listings give these numbers: TrailFX F15LL3 leveling kit up to 33 x 12.00; Zone Offroad 2 in. kits up to 35 x 12.5 and the ReadyLift 69-21200 and 69-21210 up to 35 in. (the 69-21200 with trimming); ReadyLift 69-21310, 69-21410 and 62-21360 up to 37 x 12.50 (38 in. with trimming on the 69-21310 and 62-21360); Fabtech 5–6 in. kits 38 in. or 40 in. On non-Sasquatch Broncos, ICON says 35 in. tires need its 42000 high clearance crash bars or removal of the factory crash bars.

Do I need new upper control arms to lift a Bronco?

For bigger front lifts, yes. ICON's note on its 48601 front coilover says the factory upper control arms won't align properly past 2 in. of lift and recommends aftermarket arms above that. The ReadyLift 3–4 in. SST kits, the ReadyLift 62-21360 and the Fabtech K2378DL, K2385DL, K2389DL and K2390DL systems include upper arms, and Fabtech's K2383 and K2384 arms are sold alone.

Do these kits fit the Bronco Raptor or the Bronco Sport?

Most don't. The ICON parts, the ReadyLift 62-21360 and Fabtech's 5–6 in. kits say they don't fit the Raptor; Fabtech lists the 3.0L Raptor on the K2378DL, K2385DL and K2389DL, so confirm with us first. The Bronco Sport is a different vehicle: the ReadyLift 69-21150 is the Bronco Sport kit we carry.

Buying guide, Fabtech, Ford bronco, Icon vehicle dynamics, Leveling kits, Lift kits, Readylift, Suspension