TrailFX F20LL4 2-inch leveling kit for 2017-2024 Ford F-250 and F-350 Super Duty

Quick answer: To pick a lift or leveling kit for a Ford F-250 or F-350 Super Duty, start with your truck's model year (the 2017–2022 and 2023–2026 trucks use different kits), then check 4WD vs 2WD, your drive shaft (1-piece or 2-piece), diesel vs gas and whether it's a Tremor. Most 4WD Super Duty leveling kits add about 1.5–2.5 in. up front with coil spacers or taller coil springs; lift kits add front and rear lift and often include shocks, radius arms or 4-link arms. Every part number below is on our F-250 and F-350 lift and leveling pages, and the lift heights are the ones each listing states.

Step 1: Match the kit to your model year

Super Duty lift kits are built around the truck's front suspension, so a kit for one generation usually won't bolt onto another. Use the years in each listing's title and "At a Glance" fit line:

Model years What to know
2023–2026 Current Super Duty. Many kits are 2023+ only (ReadyLift 69-23350, 63-23440, 49-23621; Fabtech K24xx kits).
2017–2022 Aluminum-body Super Duty. Several kits split again by year (2017–2019, 2020–2021/2022) or by drive shaft.
2011–2016 Steel-body Super Duty. Rear block kits split by 1-piece vs 2-piece drive shaft.
2005–2010 4WD trucks use front coil springs, so the 2005+ coil spacer kits apply (for example ReadyLift 66-2111, listed 2005–2026).
1999–2004 The 4WD leveling kit we carry (ReadyLift 66-2085) is listed with a leaf spring front component.

Some kits cover a wide year span (ReadyLift 66-2725 and 66-2726 list 2011–2026 4WD). When a listing's title and description give different years, go by the fitment list on the product page or ask us before ordering.

Step 2: Check the details that change the part number

  • 4WD vs 2WD. Most kits here are 4WD only. The 2WD leveling kit we carry is ReadyLift 66-2299 (1999–2016 2WD, 2 in. aluminum spacer).
  • 1-piece vs 2-piece drive shaft. Rear blocks and some SST kits come in two versions: ReadyLift 69-2740 (1-piece) and 69-2741 (2-piece), 69-2735 (1-piece) and 69-2736 (2-piece), 66-2024/66-2025 (1-piece) and 66-2014 (2-piece), 66-2740 taper block (1-piece) and 66-2751 flat block (2-piece). Look under your truck: a 2-piece shaft has two sections joined by a center support bearing.
  • Diesel vs gas. The ReadyLift coil spring front lift kits (46-2723, 46-2724, 46-2727, 46-2728, 46-2729, 46-20252, 46-20254, 46-20255) are titled for diesel 4WD trucks, and the Skyjacker F1725VBKB and F1725VB listings say they do not fit gas-engine models.
  • Tremor. The Tremor has its own suspension height, and several Skyjacker 2.5 in. kits say they do not fit the Tremor package. Tremor-specific kits: ReadyLift 69-20250 (2020–2022 Tremor), 69-23250 and 69-23251 (2023+ Tremor; 69-23251 adds radius arms).
  • F-250 vs F-350. Most kits list both. A few name one only (for example Skyjacker F17451K, F17451KB and F17451KH and F1740SKXM say F-250), so check the title.

Leveling kits for 2017–2026 Super Duty 4WD

A leveling kit raises the front to match the rear. These are the front-only kits on our pages for current trucks:

Kit Front lift (listed) Type / notes from the listing
ReadyLift 66-2111 1.5 in. Coil spring spacer, 2005–2026 4WD
ReadyLift 66-2725 2.5 in. Coil spring spacer, 2011–2026 4WD
ReadyLift 66-2726 2.5 in. Coil spring spacer plus track bar relocation bracket, 2011–2026 4WD
TrailFX F20LL4 2 in. Coil spring spacer kit, 2017–2024; listed install time about 1 hour
Fabtech FTL5208 2 in. 2017+ Super Duty (see the listing for exact years)
MaxTrac 833725 2.5 in. Steel coil spacers (pair)
Skyjacker F1725MSB 2.5 in. Coil spacers and shock extensions; not for Tremor
Skyjacker F1720VBKB / F1720VBKE / F1720VBKX / F1720VBKXM 2.5 in. With Black MAX shocks, shock extension brackets, ADX 2.0 remote reservoir or ADX M2.0 shocks; not for Tremor
Skyjacker F1725VB / F1725VBKB / F1725VBKE / F1725VBKX 2.5 in. Coil springs and track bar bracket; the F1725VB and F1725VBKB listings say they do not fit gas engines or the Tremor
ReadyLift 46-20252 / 46-20254 / 46-20255 2.5 in. (46-20255 lists 2.25 in.) Coil springs, 2020–2026 diesel 4WD; 46-20254 adds Falcon 2.1 front and tow/haul rear shocks, 46-20255 adds Falcon 3.3 shocks
ReadyLift 46-2723 / 46-2724 / 46-2728 2.5 in. Coil springs for 2017–2019 diesel 4WD (46-2728 lists 2011–2019 and includes a track bar relocation bracket); 46-2723 and 46-2724 add Bilstein shocks

Lift kits for 2017–2022 Super Duty

Kit Lift (listed) Notes
ReadyLift 69-2740 / 69-2741 2.5 in. front / 2 in. rear SST kit (spacer + rear blocks), 1-piece / 2-piece drive shaft, 2017–2026 4WD
ReadyLift 69-2735 / 69-2736 3.5 in. SST kit, 1-piece / 2-piece drive shaft, 2017–2022 4WD
ReadyLift 69-20250 2.5 in. front / 2.5 in. rear 2020–2022 Tremor
ReadyLift 49-27421 4 in. front / 4 in. rear Coil springs, radius arms, Falcon shocks, rear blocks; 2017–2022 diesel 4WD
Fabtech K2213, K2214, K2215, K2216, K2217M (and DL/M versions) 4 in. Basic, radius arm and 4-link systems with shocks, titled 2017–2022
Fabtech K2252, K2253, K2254 (and DL/M versions) 4 in. Basic, radius arm and 4-link systems titled 2020–2021
Fabtech K2218, K2219, K2243DL, K2256, K2257 (and M versions) 6 in. Radius arm and 4-link systems (years in each title); K2255 is a basic 6 in. kit titled for the 6.2L gas engine
Fabtech K2266M 8 in. 4-link system with shocks, titled 2017–2021
Skyjacker F17451 / F17451K / F17451KB / F17451KH / F1740SKXM 4 in. F17451 lists F-250 and F-350 2017–2018; the K versions and F1740SKXM list F-250
MaxTrac 943300 / 944300 component boxes, 753380 8 in. front coils, 903340 / 903360 rear lift box kits 4–8 in. systems MaxTrac sells its lift systems as numbered boxes; check which boxes make up the full kit for your lift height

Lift kits for 2023–2026 Super Duty

Kit Lift (listed) Notes
ReadyLift 69-23350 3.5 in. front / 3.5 in. rear SST kit, 2023–2026 4WD
ReadyLift 69-23250 / 69-23251 2.5 in. front / 1 in. rear (69-23250) 2023+ Tremor; 69-23251 adds radius arms
ReadyLift 63-23440 4 in. front / 4 in. rear Coil springs, Falcon 2.1 shocks, radius drops, track bar bracket, rear blocks
ReadyLift 49-23621 6 in. Coil springs, tubular radius arms, Falcon shocks
Fabtech K2401 / K2401M 2.5 in. Radius arm kit with shocks
Fabtech K2404 / K2404DL / K2404M 4 in. Budget system titled for 2023–2027 6.7L diesel (performance, Dirt Logic or Stealth shocks)
Fabtech K2405, K2406, K2409 (and DL/M versions) 4 in. Basic, radius arm and 4-link systems
Fabtech K2412, K2413, K2415DL, K2417 (and M versions) 6 in. Basic, radius arm and 4-link systems
Skyjacker F23651S 6 in. Component box, 2023–2025

Older Super Duty trucks (1999–2016)

  • 2011–2016: ReadyLift 46-2727 / 46-2729 (2.5 in. coil springs with Bilstein shocks, diesel 4WD); rear blocks 66-2024 (4 in., 1-piece), 66-2025 (5 in., 1-piece), 66-2014 (4 in., 2-piece); Fabtech K2210 4 in. kits (titled 2012–2016), K2288DL 6 in. 4-link (2011–2016 F-250), K2376M (2012–2016); Fabtech FTS22144 / FTS22145 component boxes (2011–2012).
  • 2005–2010: ReadyLift 66-2111 1.5 in. leveling kit; rear blocks 66-2294 (4 in.) and 66-2295 (5 in.) for 2-piece drive shafts (1999–2010); Fabtech K2060, K2181 and K2181M kits (2005–2007), K2160M (titled 2008–2015).
  • 1999–2004: ReadyLift 66-2085 2 in. 4WD leveling kit; ReadyLift 66-2299 for 2WD trucks (1999–2016).

Parts that go with a lift or level

  • Track bars and brackets: ReadyLift 77-2006 adjustable front track bar for 2017–2026 4WD with 0–5 in. of front lift (the listing says it does not fit the F-450); 77-2005 for 2005–2016; track bar bracket 67-2538.
  • Headlight leveling brackets (2023–2026 with the onboard scale option): ReadyLift 67-23210 for 2.5 in. and 67-23410 for 3.5–6 in.
  • Radius arm brackets (2023–2026): ReadyLift 67-23350.
  • Steering stabilizer: ReadyLift 77-23200 dual Falcon stabilizer.
  • Shocks: if your kit doesn't include them, see F-250 Super Duty shocks.

Before you order

  1. Confirm year, 4WD/2WD, engine, drive shaft type and trim (Tremor or not).
  2. Read the fitment list and "Important" notes on the product page.
  3. Plan for a wheel alignment after install (see Do I need an alignment after a leveling kit?).
  4. Check tire size, headlight aim and any driver-assist sensors after lifting.
  5. Not sure? Contact us with your year, trim and VIN before you order.

FAQ

What's the difference between a leveling kit and a lift kit on a Super Duty?

A leveling kit raises only the front (about 1.5–2.5 in. on the kits above) so the truck sits level. A lift kit raises the front and rear and often adds shocks, radius arms or 4-link arms. More detail: Truck leveling kit vs lift kit.

Do the same kits fit the F-250 and F-350?

Most kits on our pages list both the F-250 and F-350 Super Duty for the same years. A few list only one model, so check the title and fitment list.

Why does the drive shaft matter?

Rear blocks change the rear axle angle, and ReadyLift sells different blocks and SST kits for 1-piece and 2-piece drive shafts. Using the wrong one can put the driveline at the wrong angle.

Will a regular leveling kit fit a Tremor?

Not always. Several Skyjacker 2.5 in. kits say they do not fit the Tremor package. ReadyLift makes Tremor-specific SST kits (69-20250 for 2020–2022, 69-23250 and 69-23251 for 2023+).

Do I need a track bar after leveling?

Some kits include a track bar bracket (for example ReadyLift 66-2726 and 46-2728, Skyjacker F1725VB). ReadyLift's adjustable track bars are listed for trucks with 0–5 in. of front lift and are made to help re-center the axle.

Shop and read more

Buying guide, Ford, Leveling kits, Lift kits, Super duty