Quick answer: Most Jeep Gladiator (JT, 2020 and newer) lift kits we carry give about 3 to 5.5 in. of lift. For a bolt-in 3 in. kit with shocks, look at Fabtech's Sport systems; for a taller coil-spring kit, ReadyLift 69-6041 (4 in. front / 3 in. rear) and MaxTrac K949942 (4 in. front / 2.5 in. rear per its specs); for 3.5 in. while keeping the factory shocks, Skyjacker G350PELT or G351PELT. Mojave owners need Mojave-specific kits (Fabtech K4193M or FTS24286). Every kit below is described from its own listing; always check the full fit list (year, engine, trim) before you order.
Want 2.5 in. or less? Our Jeep Wrangler and Gladiator leveling kit guide covers the mild kits (Skyjacker JTFPS75, ReadyLift 69-6025, Skyjacker G250PELT and G250MMSB, Bilstein B8 5100). This guide covers the bigger lifts.
Step 1: Check year, engine and trim
- Year. Several Fabtech kits are listed for the 2020 Gladiator only, others for 2021–2026 or 2020–2026. Use the kit that names your model year.
- Engine. Some Fabtech listings say "3.6L" or "Only Fits Models w/6 Cylinders". Check the listing's important notes.
- Mojave. The Mojave has its own suspension (factory Fox 2.5 internal-bypass shocks and hydraulic bump stops, per the Fabtech and Skyjacker listings). Skyjacker G25XM says it will not fit Mojave models. Use a kit that names the Mojave.
3 in. kits with shocks (Fabtech Sport)
| Kit | Lift (per listing) | Listed fit | Notes from the listing |
|---|---|---|---|
| Fabtech K4160M Sport | About 3 in. | 2020–2026 Gladiator | Dual-rate front coil springs, rear coil spring spacers, shocks |
| Fabtech K4161DL Sport | About 3 in. | 2020–2026 Gladiator | Dual-rate front coils, rear coil spacers, shocks |
| Fabtech K4190M Sport | 3 in. | 2021–2026 Gladiator | Corner-specific dual-rate coils, shocks, bump stop extensions, sway bar links, rear track bar bracket |
| Fabtech K4191DL Sport | About 3 in. | 2021–2026 Gladiator | Progressive dual-rate black coil springs, shocks, mounting hardware |
| Fabtech FTS24247 Trail | 3 in. | 2020–2026 Gladiator (3.6L, 6-cylinder) | Short-arm system using the factory lower control arm mounts; listing says heavy off-road use requires driveshafts FTS94057 (front) and FTS94065 (rear) and lists 35/12.50R20 tires on 20x9 wheels |
The "M" and "DL" versions of each Sport system are separate part numbers. Compare the shocks and parts list on each listing before you choose.
4-link and long-arm systems
| Kit | Lift (per listing) | Listed fit | Notes from the listing |
|---|---|---|---|
| Fabtech K4163M Sport II | About 3 in. | 2020–2026 Gladiator | Bolt-on 4-link with heavy-wall links and 1 in. Uniballs; no cutting or welding to mount the brackets |
| Fabtech FTS24243 Sport II | About 3 in. | 2020 Gladiator (3.6L, 6-cylinder) | 2 in. diameter links, 1 in. Uniballs; listing notes 35/12.50R17 tires on 17x9 wheels |
| Fabtech FTS24258 JL Crawler long arm | 3 in. | 2020 Gladiator | Long-arm box kit with a full-width front crossmember and new rear frame-side mounts |
| Fabtech FTS24252 long arm | For about 3 in. of lift | 2020 Gladiator | Front upper and lower link arms (a component kit; check what else your build needs) |
| Fabtech FTS24224 JL Crawler long arm | About 5 in. | At a Glance: 2020 Gladiator and 2018–2023 Wrangler (the description says 2020–2023 Gladiator; confirm your year) | Full-width front crossmember, new rear frame-side link mounts |
Coilover systems
| Kit | Lift (per listing) | Listed fit | Notes from the listing |
|---|---|---|---|
| Fabtech K4181DL Crawler Coilover | About 3 in. | 2020 Gladiator (3.6L) | Coilover-based system |
| Fabtech K4211DL Crawler Coilover | About 3 in. | 2021–2023 Gladiator; 2020–2023 Wrangler | 1/4 in. bolt-on steel brackets |
| Fabtech K4212DL Crawler Coilover | 5 in. | 2021–2023 Gladiator; 2020–2023 Wrangler | Coilover and shock components for trail use |
Not sure if you want coilovers? See coilover vs shock and spring.
Coil spring kits: 3.5 to 5.5 in.
| Kit | Lift (per listing) | Listed fit | Notes from the listing |
|---|---|---|---|
| ReadyLift 69-6041 Terrain Flex 4-Arm | 4 in. front / 3 in. rear | 2020–2026 Gladiator | Front lift coil springs, rear coil spring spacers, Falcon 2.1 monotube shocks; ReadyLift lists up to 37 in. tires |
| MaxTrac K949942S | Sold as 4.5 in.; specs list 4 in. front / 2.5 in. rear | At a Glance: 2022–2024 Gladiator (title says 2020–2024) | Front and rear coils, bump stop extensions, front trac bar, rear sway bar end links, MaxTrac shocks; about 5 hr install |
| MaxTrac K949942F | Sold as 4.5 in.; specs list 4 in. front / 2.5 in. rear | At a Glance: 2022–2024 Gladiator (title says 2020–2024) | Same kit with Fox 2.0 Performance Series shocks |
| Skyjacker G350PELT | 3.5 in. front / 2 in. rear | 2020–2025 Gladiator | 2-stage dual-rate long-travel coils; keeps the factory shocks; Skyjacker mentions 37 in. tires |
| Skyjacker G351PELT | 3.5 in. | 2020–2025 Gladiator | 2-stage dual-rate long-travel coils; keeps the factory shocks; Skyjacker mentions 37 in. tires |
| Skyjacker G565XLT | 5.5 in. (component box) | 2020–2025 Gladiator | Front lower and rear upper flex control arms, 5.5–6.5 in. adjustable front track bar, rear stainless brake lines; part of a full system |
MaxTrac also sells the K949942 kit as two boxes: the 949942-1 front box (front coils, bump stop extensions, trac bar) and the 949942-2 rear box (rear coils, bump stop extensions, brake line brackets, sway bar end links).
Gladiator Mojave kits
| Kit | Lift (per listing) | Listed fit | Notes from the listing |
|---|---|---|---|
| Fabtech K4193M Sport II (Mojave) | About 3 in. | 2021–2026 Gladiator Mojave | Keeps the factory Fox 2.5 internal-bypass shocks and hydraulic bump stops; dual-rate coils; Fabtech lists room for up to 37 in. tires |
| Fabtech FTS24286 Trail (Mojave) | See the listing | 2020 Gladiator Mojave (3.6L) | Keeps the factory Fox 2.5 internal-bypass shocks; shock extension brackets, relocated bump stop pads, Mojave dual-rate coils; heavy off-road use requires driveshafts FTS94057 (front) and FTS94068 (rear) |
For a milder Mojave lift, Skyjacker G250MMSB (2.5 in.) is in our leveling kit guide. Skyjacker's G25XM is a shock box (ADX M2.0 aluminum monotube shocks) for Gladiators with up to 2.5 in. of lift; it does not fit the Mojave.
How to choose
- Keep the factory shocks? Skyjacker G350PELT/G351PELT and the Mojave kits are built around the factory shocks. The Fabtech Sport kits, MaxTrac K949942 kits and ReadyLift 69-6041 include shocks.
- Short arm or long arm? Short-arm kits such as Fabtech FTS24247 use the factory lower control arm mounts, per the listing. 4-link and long-arm systems use new links and mounts for more articulation and are bigger jobs.
- Read the extra-parts notes. Some listings call for driveshafts for heavy off-road use or list a tire and wheel size. Plan for an alignment after any lift; our death wobble causes and fixes article covers front-end checks.
- Component boxes (Skyjacker G565XLT, MaxTrac 949942-1/-2, Fabtech FTS24252) are parts of a full system. Check the listing for what else you need.
More Jeep guides and shops
- Jeep Gladiator upgrades guide, Jeep Wrangler lift kit guide, Wrangler and Gladiator leveling kits
- Leveling kit vs lift kit, coilover vs shock and spring
- Shop: Gladiator lift & leveling kits, Gladiator shocks, all Gladiator parts, all lift kits
- Brands: Fabtech, Skyjacker, ReadyLift, MaxTrac
FAQ
What size lift kit is best for a Jeep Gladiator?
It depends on your tires and how you drive. The kits we carry run from about 3 in. (Fabtech Sport and Trail systems) to 3.5 in. (Skyjacker G350PELT/G351PELT), 4 in. front (ReadyLift 69-6041, MaxTrac K949942) and 5 to 5.5 in. (Fabtech K4212DL and FTS24224, Skyjacker G565XLT component box). Check each listing for its fit and tire notes.
Can I put 37 in. tires on a lifted Gladiator?
Several listings mention 37 in. tires: ReadyLift 69-6041 (up to 37 in.), Skyjacker G350PELT and G351PELT, and Fabtech K4193M for the Mojave. Wheel size, offset and trimming also matter, so check the listing.
Does a Gladiator Mojave need a special lift kit?
Yes. The Mojave uses factory Fox 2.5 internal-bypass shocks and hydraulic bump stops. Fabtech K4193M (2021–2026) and FTS24286 (2020) are made for the Mojave and keep those shocks. Skyjacker G25XM says it will not fit Mojave models.
Will a Wrangler lift kit fit a Gladiator?
Only if the listing names the Gladiator. A few Fabtech systems (K4211DL, K4212DL, FTS24224) list both the Wrangler and the Gladiator; most kits are vehicle-specific.

